wxruby3 0.9.0.pre.rc.3-x64-mingw-ucrt → 0.9.0-x64-mingw-ucrt

data/lib/wx/doc/gen/tool_tip.rb

@@ -37,7 +37,7 @@ module Wx
     
     # Enable or disable tooltips globally.
     # May not be supported on all platforms (eg. {Wx::Cocoa}).
-    # @param flag [true,false] 
+    # @param flag [Boolean] 
     # @return [void]
     def self.enable(flag) end
     
@@ -53,14 +53,6 @@ module Wx
     # @return [void]
     def self.set_delay(msecs) end
     
-    # Set tooltip maximal width in pixels.
-    # By default, tooltips are wrapped at a suitably chosen width. You can pass -1 as width to disable wrapping them completely, 0 to restore the default behaviour or an arbitrary positive value to wrap them at the given width.
-    # Notice that this function does not change the width of the tooltips created before calling it.
-    # Currently this function is wxMSW-only.
-    # @param width [Integer] 
-    # @return [void]
-    def self.set_max_width(width) end
-    
     # Set the delay between subsequent tooltips to appear.
     # May not be supported on all platforms (eg. {Wx::Cocoa}, GTK).
     # @param msecs [Integer] 

data/lib/wx/doc/gen/toolbook.rb

@@ -73,11 +73,11 @@ module Wx
     # @param size [Array(Integer, Integer), Wx::Size] 
     # @param style [Integer] 
     # @param name [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def create(parent, id, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=0, name=('')) end
     
     # Returns the {Wx::ToolBarBase} associated with the control.
-    # @return [Wx::ToolBarBase]
+    # @return [Wx::ToolBar]
     def get_tool_bar; end
     alias_method :tool_bar, :get_tool_bar
     
@@ -88,16 +88,16 @@ module Wx
     #   
     #   true if successful, false otherwise (currently only if the index is invalid).
     #   @param page [Integer]  The index of the page.
-    #   @param enable [true,false]  true to enable the page and false to disable it.
-    #   @return [true,false]
+    #   @param enable [Boolean]  true to enable the page and false to disable it.
+    #   @return [Boolean]
     # @overload enable_page(page, enable)
     #   Enables or disables the specified page.
     #   This is similar to the overload above, but finds the index of the specified page.
     #   
     #   true if successful, false otherwise, e.g. if page is not one of the pages of this control.
     #   @param page [Wx::Window]  Pointer of a page windows inside the book control.
-    #   @param enable [true,false]  true to enable the page and false to disable it.
-    #   @return [true,false]
+    #   @param enable [Boolean]  true to enable the page and false to disable it.
+    #   @return [Boolean]
     def enable_page(*args) end
     
   end # Toolbook

data/lib/wx/doc/gen/top_level_window.rb

@@ -108,13 +108,13 @@ module Wx
     # @param size [Array(Integer, Integer), Wx::Size] 
     # @param style [Integer] 
     # @param name [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def create(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FrameNameStr) end
     
     # Returns true if the platform supports making the window translucent.
     # 
     # @see Wx::TopLevelWindow#set_transparent 
-    # @return [true,false]
+    # @return [Boolean]
     def can_set_transparent; end
     alias_method :can_set_transparent?, :can_set_transparent
     
@@ -132,16 +132,16 @@ module Wx
     
     # Enables or disables the Close button (most often in the right upper corner of a dialog) and the Close entry of the system menu (most often in the left upper corner of the dialog).
     # Returns true if operation was successful. This may be wrong on X11 (including GTK+) where the window manager may not support this operation and there is no way to find out.
-    # @param enable [true,false] 
-    # @return [true,false]
+    # @param enable [Boolean] 
+    # @return [Boolean]
     def enable_close_button(enable=true) end
     
     # Enables or disables the Maximize button (in the right or left upper corner of a frame or dialog).
     # Currently only implemented for wxMSW and wxOSX.
     # The window style must contain {Wx::MAXIMIZE_BOX}.
     # Returns true if operation was successful. Note that a successful operation does not change the window style flags.
-    # @param enable [true,false] 
-    # @return [true,false]
+    # @param enable [Boolean] 
+    # @return [Boolean]
     def enable_maximize_button(enable=true) end
     
     # Enables or disables the Minimize button (in the right or left upper corner of a frame or dialog).
@@ -149,11 +149,11 @@ module Wx
     # The window style must contain {Wx::MINIMIZE_BOX}.
     # Note that in wxMSW a successful operation will change the window style flags.
     # Returns true if operation was successful. Note that a successful operation does not change the window style flags.
-    # @param enable [true,false] 
-    # @return [true,false]
+    # @param enable [Boolean] 
+    # @return [Boolean]
     def enable_minimize_button(enable=true) end
     
-    # Returns a pointer to the button which is the default for this window, or <code></code> NULL.
+    # Returns a pointer to the button which is the default for this window, or NULL.
     # The default button is the one activated by pressing the Enter key.
     # @return [Wx::Window]
     def get_default_item; end
@@ -183,74 +183,54 @@ module Wx
     # Iconizes or restores the window.
     # Note that in wxGTK the change to the window state is not immediate, i.e. {Wx::TopLevelWindow#is_iconized} will typically return false right after a call to {Wx::TopLevelWindow#iconize} and its return value will only change after the control flow returns to the event loop and the notification about the window being really iconized is received.
     # @see Wx::TopLevelWindow#is_iconized
-    # @see  Wx::TopLevelWindow#restore()
+    # @see  Wx::TopLevelWindow#restore
     # @see  Wx::IconizeEvent. 
-    # @param iconize [true,false]  If true, iconizes the window; if false, shows and restores it.
+    # @param iconize [Boolean]  If true, iconizes the window; if false, shows and restores it.
     # @return [void]
     def iconize(iconize=true) end
     
     # Returns true if this window is currently active, i.e. if the user is currently working with it.
-    # @return [true,false]
+    # @return [Boolean]
     def is_active; end
     alias_method :active?, :is_active
     
     # Returns true if this window is expected to be always maximized, either due to platform policy or due to local policy regarding particular class.
-    # @return [true,false]
+    # @return [Boolean]
     def is_always_maximized; end
     alias_method :always_maximized?, :is_always_maximized
     
     # Returns true if the window is in fullscreen mode.
     # 
     # @see Wx::TopLevelWindow#show_full_screen 
-    # @return [true,false]
+    # @return [Boolean]
     def is_full_screen; end
     alias_method :full_screen?, :is_full_screen
     
     # Returns true if the window is iconized.
-    # @return [true,false]
+    # @return [Boolean]
     def is_iconized; end
     alias_method :iconized?, :is_iconized
     
     # Returns true if the window is maximized.
-    # @return [true,false]
+    # @return [Boolean]
     def is_maximized; end
     alias_method :maximized?, :is_maximized
     
-    # This method is specific to {Wx::Universal} port.
-    # Returns true if this window is using native decorations, false if we draw them ourselves.
-    # @see Wx::TopLevelWindow#use_native_decorations
-    # @see  Wx::TopLevelWindow#use_native_decorations_by_default 
-    # @return [true,false]
-    def is_using_native_decorations; end
-    alias_method :using_native_decorations?, :is_using_native_decorations
-    
     # Lays out the children using the window sizer or resizes the only child of the window to cover its entire area.
     # This class overrides the base class {Wx::TopLevelWindow#layout} method to check if this window contains exactly one child  which is commonly the case, with {Wx::Panel} being often created as the only child of {Wx::TopLevelWindow}  and, if this is the case, resizes this child window to cover the entire client area.
     # Note that if you associate a sizer with this window, the sizer takes precedence and the only-child-resizing is only used as fallback.
     # false if nothing was done because the window has neither a sizer nor a single child, true otherwise.
-    # @return [true,false]
+    # @return [Boolean]
     def layout; end
     
     # Maximizes or restores the window.
     # Note that, just as with {Wx::TopLevelWindow#iconize}, the change to the window state is not immediate in at least wxGTK port.
     # @see Wx::TopLevelWindow#restore
     # @see  Wx::TopLevelWindow#iconize 
-    # @param maximize [true,false]  If true, maximizes the window, otherwise it restores it.
+    # @param maximize [Boolean]  If true, maximizes the window, otherwise it restores it.
     # @return [void]
     def maximize(maximize=true) end
     
-    # MSW-specific function for accessing the system menu.
-    # Returns a {Wx::Menu} pointer representing the system menu of the window under MSW. The returned {Wx::Menu} may be used, if non-NULL, to add extra items to the system menu. The usual {Wx::EVT_MENU} events (that can be processed using EVT_MENU event table macro) will then be generated for them. All the other {Wx::Menu} methods may be used as well but notice that they won't allow you to access any standard system menu items (e.g. they can't be deleted or modified in any way currently).
-    # Notice that because of the native system limitations the identifiers of the items added to the system menu must be multiples of 16, otherwise no events will be generated for them.
-    # The returned pointer must not be deleted, it is owned by the window and will be only deleted when the window itself is destroyed.
-    # This function is not available in the other ports by design, any occurrences of it in the portable code must be guarded by 
-    # ```ruby
-    #   if Wx::PLATFORM == 'WXMSW'
-    # ```
-    #  preprocessor guards.
-    # @return [Wx::Menu]
-    def msw_get_system_menu; end
-    
     # Use a system-dependent way to attract users attention to the window when it is in background.
     # flags may have the value of either {Wx::USER_ATTENTION_INFO} (default) or {Wx::USER_ATTENTION_ERROR} which results in a more drastic action. When in doubt, use the default value.
     # This function should normally be only used when the application is not already in foreground.
@@ -353,28 +333,15 @@ module Wx
     # Note that in wxGTK this function must be called before the window is shown the first time it's called (but it can be called again after showing the window too).
     # See the shaped sample for an example of using this function.
     # @param alpha [Integer]  Determines how opaque or transparent the window will be, if the platform supports the operation. A value of 0 sets the window to be fully transparent, and a value of 255 sets the window to be fully opaque.
-    # @return [true,false]
+    # @return [Boolean]
     def set_transparent(alpha) end
     alias_method :transparent=, :set_transparent
     
     # This virtual function is not meant to be called directly but can be overridden to return false (it returns true by default) to allow the application to close even if this, presumably not very important, window is still opened.
     # By default, the application stays alive as long as there are any open top level windows.
-    # @return [true,false]
+    # @return [Boolean]
     def should_prevent_app_exit; end
     
-    # This function sets the {Wx::TopLevelWindow}'s modified state on macOS, which currently draws a black dot in the {Wx::TopLevelWindow}'s close button.
-    # On other platforms, this method does nothing.
-    # @see Wx::TopLevelWindow#osx_is_modified 
-    # @param modified [true,false] 
-    # @return [void]
-    def osx_set_modified(modified) end
-    
-    # Returns the current modified state of the {Wx::TopLevelWindow} on macOS.
-    # On other platforms, this method does nothing.
-    # @see Wx::TopLevelWindow#osx_set_modified 
-    # @return [true,false]
-    def osx_is_modified; end
-    
     # Sets the file name represented by this {Wx::TopLevelWindow}.
     # Under macOS, this file name is used to set the "proxy icon", which appears in the window title bar near its title, corresponding to this file name. Under other platforms it currently doesn't do anything but it is harmless to call it now and it might be implemented to do something useful in the future so you're encouraged to use it for any window representing a file-based document.
     # @param filename [String] 
@@ -387,21 +354,6 @@ module Wx
     # @return [void]
     def show_without_activating; end
     
-    # Enables the zoom button to toggle full screen mode.
-    # A {Wx::FullScreenEvent} is generated when the users enters or exits full screen via the enter/exit full screen button.
-    # 
-    # true if the button behaviour has been changed, false if running under another OS.
-    # 
-    # Having the button is also required to let {Wx::TopLevelWindow#show_full_screen} make use of the full screen API: a full screen window gets its own space and entering and exiting the mode is animated. If the button is not present the old way of switching to full screen is used. Only {Wx::FULLSCREEN_NOTOOLBAR} and {Wx::FULLSCREEN_NOMENUBAR} will be used when using the fullscreen API (other values are ignored).
-    # 
-    # Availability:  only available for the wxOSX/Cocoa port.  {Wx::osx}
-    # @see Wx::TopLevelWindow#show_full_screen
-    # @see  Wx::FullScreenEvent
-    # @param enable [true,false]  If true (default) make the zoom button toggle full screen; if false the button does only toggle zoom.
-    # @param style [Integer]  This parameter sets which elements will be hidden when the user presses the full screen button. See {Wx::TopLevelWindow#show_full_screen} for possible values. It is available since wxWidgets 3.1.6.
-    # @return [true,false]
-    def enable_full_screen_view(enable=true, style=Wx::FULLSCREEN_ALL) end
-    
     # Depending on the value of show parameter the window is either shown full screen or restored to its normal state.
     # style is a bit list containing some or all of the following values, which indicate what elements of the window to hide in full-screen mode:
     # 
@@ -416,15 +368,15 @@ module Wx
     # Showing a window full screen also actually {Wx::TopLevelWindow#show}s the window if it isn't shown.
     # @see Wx::TopLevelWindow#enable_full_screen_view
     # @see  Wx::TopLevelWindow#is_full_screen 
-    # @param show [true,false] 
+    # @param show [Boolean] 
     # @param style [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def show_full_screen(show, style=Wx::FULLSCREEN_ALL) end
     
     # Get the current content protection of the window.
     # 
     # @see Wx::TopLevelWindow#set_content_protection
-    # @return [ContentProtection]
+    # @return [Wx::ContentProtection]
     def get_content_protection; end
     alias_method :content_protection, :get_content_protection
     
@@ -437,33 +389,11 @@ module Wx
     # 
     # Availability:  only available for the wxMSW, wxOSX/Cocoa ports.  {Wx::msw},{Wx::osx}
     # @see Wx::TopLevelWindow#get_content_protection
-    # @param contentProtection [ContentProtection] 
-    # @return [true,false]
+    # @param contentProtection [Wx::ContentProtection] 
+    # @return [Boolean]
     def set_content_protection(contentProtection) end
     alias_method :content_protection=, :set_content_protection
     
-    # This method is specific to {Wx::Universal} port.
-    # Use native or custom-drawn decorations for this window only. Notice that to have any effect this method must be called before really creating the window, i.e. two step creation must be used:
-    # 
-    # ```ruby
-    #   frame = MyFrame.new                   # use default ctor  
-    #   frame.use_native_decorations(false)   # change from default "true"
-    #   frame.create(parent, title, ...)      # really create the frame
-    # ```
-    # @see Wx::TopLevelWindow#use_native_decorations_by_default
-    # @see  Wx::TopLevelWindow#is_using_native_decorations 
-    # @param native [true,false] 
-    # @return [void]
-    def use_native_decorations(native=true) end
-    
-    # This method is specific to {Wx::Universal} port.
-    # Top level windows in {Wx::Universal} port can use either system-provided window decorations (i.e. title bar and various icons, buttons and menus in it) or draw the decorations themselves. By default the system decorations are used if they are available, but this method can be called with native set to false to change this for all windows created after this point.
-    # Also note that if WXDECOR environment variable is set, then custom decorations are used by default and so it may make sense to call this method with default argument if the application can't use custom decorations at all for some reason.
-    # @see Wx::TopLevelWindow#use_native_decorations 
-    # @param native [true,false] 
-    # @return [void]
-    def use_native_decorations_by_default(native=true) end
-    
     # Get the default size for a new top level window.
     # This is used internally by wxWidgets on some platforms to determine the default size for a window created using {Wx::DEFAULT_SIZE} so it is not necessary to use it when creating a {Wx::TopLevelWindow}, however it may be useful if a rough estimation of the window size is needed for some other reason.
     # @return [Wx::Size]

data/lib/wx/doc/gen/tree_ctrl.rb

@@ -409,7 +409,7 @@ module Wx
     # @param style [Integer] 
     # @param validator [Wx::Validator] 
     # @param name [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def create(parent, id=Wx::StandardID::ID_ANY, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::TR_DEFAULT_STYLE, validator=Wx::DEFAULT_VALIDATOR, name=Wx::TreeCtrlNameStr) end
     
     # Deletes the specified item.
@@ -433,7 +433,7 @@ module Wx
     
     # Enable or disable a beep if there is no match for the currently entered text when searching for the item from keyboard.
     # The default is to not beep in this case except in wxMSW where the beep is always generated by the native control and cannot be disabled, i.e. calls to this function do nothing there.
-    # @param on [true,false] 
+    # @param on [Boolean] 
     # @return [void]
     def enable_bell_on_no_match(on=true) end
     
@@ -442,7 +442,7 @@ module Wx
     # This function is currently supported under Windows only.
     # @see Wx::TreeCtrl#edit_label 
     # @param item [Wx::TreeItemId] 
-    # @param discardChanges [true,false] 
+    # @param discardChanges [Boolean] 
     # @return [void]
     def end_edit_label(item, discardChanges=false) end
     
@@ -472,15 +472,15 @@ module Wx
     # Notice that the rectangle coordinates are logical, not physical ones. So, for example, the x coordinate may be negative if the tree has a horizontal scrollbar and its position is not 0.
     # @param item [Wx::TreeItemId] 
     # @param rect [Wx::Rect] 
-    # @param textOnly [true,false] 
-    # @return [true,false]
+    # @param textOnly [Boolean] 
+    # @return [Boolean]
     def get_bounding_rect(item, rect, textOnly=false) end
     alias_method :bounding_rect, :get_bounding_rect
     
     # Returns the number of items in the branch.
     # If recursively is true, returns the total number of descendants, otherwise only one level of children is counted.
     # @param item [Wx::TreeItemId] 
-    # @param recursively [true,false] 
+    # @param recursively [Boolean] 
     # @return [Integer]
     def get_children_count(item, recursively=true) end
     alias_method :children_count, :get_children_count
@@ -558,7 +558,7 @@ module Wx
     # - {Wx::TreeItemIcon::TreeItemIcon_Expanded}: to get the expanded image (this only makes sense for items which have children - then this image is shown when the item is expanded and the normal image is shown when it is collapsed).
     # - {Wx::TreeItemIcon::TreeItemIcon_SelectedExpanded}: to get the selected expanded image (which is shown when an expanded item is currently selected).
     # @param item [Wx::TreeItemId] 
-    # @param which [TreeItemIcon] 
+    # @param which [Wx::TreeItemIcon] 
     # @return [Integer]
     def get_item_image(item, which=Wx::TreeItemIcon::TreeItemIcon_Normal) end
     alias_method :item_image, :get_item_image
@@ -630,7 +630,7 @@ module Wx
     # Returns true if the control will use a quick calculation for the best size, looking only at the first and last items.
     # The default is false.
     # @see Wx::TreeCtrl#set_quick_best_size 
-    # @return [true,false]
+    # @return [Boolean]
     def get_quick_best_size; end
     alias_method :quick_best_size, :get_quick_best_size
     
@@ -683,36 +683,36 @@ module Wx
     # 
     # @see Wx::TreeCtrl#set_item_bold 
     # @param item [Wx::TreeItemId] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_bold(item) end
     alias_method :bold?, :is_bold
     
     # Returns true if the control is empty (i.e. has no items, even no root one).
-    # @return [true,false]
+    # @return [Boolean]
     def is_empty; end
     alias_method :empty?, :is_empty
     
     # Returns true if the item is expanded (only makes sense if it has children).
     # @param item [Wx::TreeItemId] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_expanded(item) end
     alias_method :expanded?, :is_expanded
     
     # Returns true if the item is selected.
     # @param item [Wx::TreeItemId] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_selected(item) end
     alias_method :selected?, :is_selected
     
     # Returns true if the item is visible on the screen.
     # @param item [Wx::TreeItemId] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_visible(item) end
     alias_method :visible?, :is_visible
     
     # Returns true if the item has children.
     # @param item [Wx::TreeItemId] 
-    # @return [true,false]
+    # @return [Boolean]
     def item_has_children(item) end
     
     # Override this function in the derived class to change the sort order of the items in the tree control.
@@ -745,7 +745,7 @@ module Wx
     # In multiple selection controls, can be also used to deselect a currently selected item if the value of select is false.
     # Notice that calling this method will generate {Wx::EVT_TREE_SEL_CHANGING} and {Wx::EVT_TREE_SEL_CHANGED} events and that the change could be vetoed by the former event handler.
     # @param item [Wx::TreeItemId] 
-    # @param select [true,false] 
+    # @param select [Boolean] 
     # @return [void]
     def select_item(item, select=true) end
     
@@ -772,7 +772,7 @@ module Wx
     # 
     # @see Wx::TreeCtrl#is_bold 
     # @param item [Wx::TreeItemId] 
-    # @param bold [true,false] 
+    # @param bold [Boolean] 
     # @return [void]
     def set_item_bold(item, bold=true) end
     alias_method :item_bold=, :set_item_bold
@@ -786,7 +786,7 @@ module Wx
     
     # Gives the item the visual feedback for Drag'n'Drop actions, which is useful if something is dragged from the outside onto the tree control (as opposed to a DnD operation within the tree control, which already is implemented internally).
     # @param item [Wx::TreeItemId] 
-    # @param highlight [true,false] 
+    # @param highlight [Boolean] 
     # @return [void]
     def set_item_drop_highlight(item, highlight=true) end
     alias_method :item_drop_highlight=, :set_item_drop_highlight
@@ -802,7 +802,7 @@ module Wx
     # Force appearance of the button next to the item.
     # This is useful to allow the user to expand the items which don't have any children now, but instead adding them only when needed, thus minimizing memory usage and loading time.
     # @param item [Wx::TreeItemId] 
-    # @param hasChildren [true,false] 
+    # @param hasChildren [Boolean] 
     # @return [void]
     def set_item_has_children(item, hasChildren=true) end
     alias_method :item_has_children=, :set_item_has_children
@@ -811,7 +811,7 @@ module Wx
     # See {Wx::TreeCtrl#get_item_image} for the description of the which parameter.
     # @param item [Wx::TreeItemId] 
     # @param image [Integer] 
-    # @param which [TreeItemIcon] 
+    # @param which [Wx::TreeItemIcon] 
     # @return [void]
     def set_item_image(item, image, which=Wx::TreeItemIcon::TreeItemIcon_Normal) end
     
@@ -841,7 +841,7 @@ module Wx
     # If true is passed, specifies that the control will use a quick calculation for the best size, looking only at the first and last items.
     # Otherwise, it will look at all items. The default is false.
     # @see Wx::TreeCtrl#get_quick_best_size 
-    # @param quickBestSize [true,false] 
+    # @param quickBestSize [Boolean] 
     # @return [void]
     def set_quick_best_size(quickBestSize) end
     alias_method :quick_best_size=, :set_quick_best_size

data/lib/wx/doc/gen/tree_event.rb

@@ -64,7 +64,7 @@ module Wx
   class TreeEvent < NotifyEvent
   
     # Constructor, used by wxWidgets itself only.
-    # @param commandType [Wx::AUI::AuiMDIChildFrame::EventType] 
+    # @param commandType [Wx::CommandLinkButton::EventType] 
     # @param tree [Wx::TreeCtrl] 
     # @param item [Wx::TreeItemId] 
     # @return [Wx::TreeEvent]
@@ -105,7 +105,7 @@ module Wx
     
     # Returns true if the label edit was cancelled.
     # This should be called from within an EVT_TREE_END_LABEL_EDIT handler.
-    # @return [true,false]
+    # @return [Boolean]
     def is_edit_cancelled; end
     alias_method :edit_cancelled?, :is_edit_cancelled
     

data/lib/wx/doc/gen/treebook.rb

@@ -71,23 +71,23 @@ module Wx
     # The page is placed at the topmost level after all other pages. NULL could be specified for page to create an empty page.
     # @param page [Wx::Window] 
     # @param text [String] 
-    # @param bSelect [true,false] 
+    # @param bSelect [Boolean] 
     # @param imageId [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def add_page(page, text, bSelect=false, imageId=Wx::NOT_FOUND) end
     
     # Adds a new child-page to the last top-level page.
     # NULL could be specified for page to create an empty page.
     # @param page [Wx::Window] 
     # @param text [String] 
-    # @param bSelect [true,false] 
+    # @param bSelect [Boolean] 
     # @param imageId [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def add_sub_page(page, text, bSelect=false, imageId=Wx::NOT_FOUND) end
     
     # Shortcut for {Wx::Treebook#expand_node}( pageId, false ).
     # @param pageId [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def collapse_node(pageId) end
     
     # Creates a treebook control.
@@ -98,20 +98,20 @@ module Wx
     # @param size [Array(Integer, Integer), Wx::Size] 
     # @param style [Integer] 
     # @param name [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def create(parent, id, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::BK_DEFAULT, name=('')) end
     
     # Deletes the page at the specified position and all its children.
     # Could trigger page selection change in a case when selected page is removed. In that case its parent is selected (or the next page if no parent).
     # @param pagePos [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def delete_page(pagePos) end
     
     # Expands (collapses) the pageId node.
     # Returns the previous state. May generate page changing events (if selected page is under the collapsed branch, then its parent is autoselected).
     # @param pageId [Integer] 
-    # @param expand [true,false] 
-    # @return [true,false]
+    # @param expand [Boolean] 
+    # @return [Boolean]
     def expand_node(pageId, expand=true) end
     
     # Returns the parent page of the given one or {Wx::NOT_FOUND} if this is a top-level page.
@@ -131,9 +131,9 @@ module Wx
     # @param pagePos [Integer] 
     # @param page [Wx::Window] 
     # @param text [String] 
-    # @param bSelect [true,false] 
+    # @param bSelect [Boolean] 
     # @param imageId [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def insert_page(pagePos, page, text, bSelect=false, imageId=Wx::NOT_FOUND) end
     
     # Inserts a sub page under the specified page.
@@ -141,14 +141,14 @@ module Wx
     # @param pagePos [Integer] 
     # @param page [Wx::Window] 
     # @param text [String] 
-    # @param bSelect [true,false] 
+    # @param bSelect [Boolean] 
     # @param imageId [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def insert_sub_page(pagePos, page, text, bSelect=false, imageId=Wx::NOT_FOUND) end
     
     # Returns true if the page represented by pageId is expanded.
     # @param pageId [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_node_expanded(pageId) end
     alias_method :node_expanded?, :is_node_expanded
     

data/lib/wx/doc/gen/ui_action_simulator.rb

@@ -9,6 +9,7 @@ module Wx
   # {Wx::UIActionSimulator} is a class used to simulate user interface actions such as a mouse click or a key press.
   # Common usage for this class would be to provide playback and record (aka macro recording) functionality for users, or to drive unit tests by simulating user sessions.
   # See the wxUIActionSimulator Sample for an example of using this class.
+  # This class currently doesn't work when using Wayland with wxGTK.
   # 
   # ===
   # 
@@ -24,32 +25,32 @@ module Wx
     #   Move the mouse to the specified coordinates.
     #   @param x [Integer]  x coordinate to move to, in screen coordinates.
     #   @param y [Integer]  y coordinate to move to, in screen coordinates.
-    #   @return [true,false]
+    #   @return [Boolean]
     # @overload mouse_move(point)
     #   Move the mouse to the specified coordinates.
     #   @param point [Array(Integer, Integer), Wx::Point]  Point to move to, in screen coordinates.
-    #   @return [true,false]
+    #   @return [Boolean]
     def mouse_move(*args) end
     
     # Press a mouse button.
-    # @param button [Integer]  Button to press. Valid constants are {Wx::MOUSE_BTN_LEFT}, {Wx::MOUSE_BTN_MIDDLE}, and {Wx::MOUSE_BTN_RIGHT}.
-    # @return [true,false]
-    def mouse_down(button=Wx::MOUSE_BTN_LEFT) end
+    # @param button [Integer]  Button to press. Valid constants are {Wx::MouseButton::MOUSE_BTN_LEFT}, {Wx::MouseButton::MOUSE_BTN_MIDDLE}, and {Wx::MouseButton::MOUSE_BTN_RIGHT}.
+    # @return [Boolean]
+    def mouse_down(button=Wx::MouseButton::MOUSE_BTN_LEFT) end
     
     # Release a mouse button.
     # @param button [Integer]  Button to press. See {Wx::UIActionSimulator#mouse_down} for a list of valid constants.
-    # @return [true,false]
-    def mouse_up(button=Wx::MOUSE_BTN_LEFT) end
+    # @return [Boolean]
+    def mouse_up(button=Wx::MouseButton::MOUSE_BTN_LEFT) end
     
     # Click a mouse button.
     # @param button [Integer]  Button to press. See {Wx::UIActionSimulator#mouse_down} for a list of valid constants.
-    # @return [true,false]
-    def mouse_click(button=Wx::MOUSE_BTN_LEFT) end
+    # @return [Boolean]
+    def mouse_click(button=Wx::MouseButton::MOUSE_BTN_LEFT) end
     
     # Double-click a mouse button.
     # @param button [Integer]  Button to press. See {Wx::UIActionSimulator#mouse_down} for a list of valid constants.
-    # @return [true,false]
-    def mouse_dbl_click(button=Wx::MOUSE_BTN_LEFT) end
+    # @return [Boolean]
+    def mouse_dbl_click(button=Wx::MouseButton::MOUSE_BTN_LEFT) end
     
     # Perform a drag and drop operation.
     # @param x1 [Integer]  x start coordinate, in screen coordinates.
@@ -57,26 +58,26 @@ module Wx
     # @param x2 [Integer]  x destination coordinate, in screen coordinates.
     # @param y2 [Integer]  y destination coordinate, in screen coordinates.
     # @param button [Integer]  Button to press. See {Wx::UIActionSimulator#mouse_down} for a list of valid constants.
-    # @return [true,false]
-    def mouse_drag_drop(x1, y1, x2, y2, button=Wx::MOUSE_BTN_LEFT) end
+    # @return [Boolean]
+    def mouse_drag_drop(x1, y1, x2, y2, button=Wx::MouseButton::MOUSE_BTN_LEFT) end
     
     # Press a key.
     # If you are using modifiers then it needs to be paired with an identical KeyUp or the modifiers will not be released (MSW and macOS).
     # @param keycode [Integer]  Key to operate on, as an integer. It is interpreted as a {Wx::KeyCode}.
     # @param modifiers [Integer]  A combination of {Wx::KeyModifier} flags to be pressed with the given keycode.
-    # @return [true,false]
+    # @return [Boolean]
     def key_down(keycode, modifiers=Wx::KeyModifier::MOD_NONE) end
     
     # Release a key.
     # @param keycode [Integer]  Key to operate on, as an integer. It is interpreted as a {Wx::KeyCode}.
     # @param modifiers [Integer]  A combination of {Wx::KeyModifier} flags to be pressed with the given keycode.
-    # @return [true,false]
+    # @return [Boolean]
     def key_up(keycode, modifiers=Wx::KeyModifier::MOD_NONE) end
     
     # Press and release a key.
     # @param keycode [Integer]  Key to operate on, as an integer. It is interpreted as a {Wx::KeyCode}.
     # @param modifiers [Integer]  A combination of {Wx::KeyModifier} flags to be pressed with the given keycode.
-    # @return [true,false]
+    # @return [Boolean]
     def char(keycode, modifiers=Wx::KeyModifier::MOD_NONE) end
     
     # Simulate selection of an item with the given text.
@@ -85,13 +86,13 @@ module Wx
     # 
     # true if the item text was successfully selected or false if the currently focused window is not one of the controls allowing item selection or if the item with the given text was not found in it.
     # @param text [String]  The text of the item to select.
-    # @return [true,false]
+    # @return [Boolean]
     def select(text) end
     
     # Emulate typing in the keys representing the given string.
     # Currently only the ASCII letters are universally supported. Digits and punctuation characters can be used with the standard QWERTY (US) keyboard layout but may not work with other layouts.
     # @param text [String]  The string, containing only US ASCII characters, to type.
-    # @return [true,false]
+    # @return [Boolean]
     def text(text) end
     
   end # UIActionSimulator