wxruby3 0.9.0.pre.rc.2-x64-mingw-ucrt → 0.9.0.pre.rc.3-x64-mingw-ucrt

data/lib/wx/doc/gen/notebook.rb

@@ -64,13 +64,19 @@ module Wx
   # === Styles
   # 
   # This class supports the following styles:
-  #  
+  # 
   # - {Wx::NB_TOP}: Place tabs on the top side. 
+  # 
   # - {Wx::NB_LEFT}: Place tabs on the left side. 
+  # 
   # - {Wx::NB_RIGHT}: Place tabs on the right side. 
+  # 
   # - {Wx::NB_BOTTOM}: Place tabs under instead of above the notebook pages. 
+  # 
   # - {Wx::NB_FIXEDWIDTH}: (Windows only) All tabs will have same width. 
+  # 
   # - {Wx::NB_MULTILINE}: (Windows only) There can be several rows of tabs. 
+  # 
   # - {Wx::NB_NOPAGETHEME}: (Windows only) Display a solid colour on notebook pages, and not a gradient, which can reduce performance. 
   # 
   # The styles {Wx::NB_LEFT}, RIGHT and BOTTOM are not supported under Microsoft Windows when using visual themes.
@@ -78,32 +84,31 @@ module Wx
   # 
   # The following event-handler methods redirect the events to member method or handler blocks for {Wx::BookCtrlEvent} events.
   # Event handler methods for events emitted by this class:
+  # 
   # - {Wx::EvtHandler#evt_notebook_page_changed}(id, meth = nil, &block): The page selection was changed. Processes a {Wx::EVT_NOTEBOOK_PAGE_CHANGED} event. 
+  # 
   # - {Wx::EvtHandler#evt_notebook_page_changing}(id, meth = nil, &block): The page selection is about to be changed. Processes a {Wx::EVT_NOTEBOOK_PAGE_CHANGING} event. This event can be vetoed. 
   # 
   # == Page backgrounds
   # 
   # On Windows, the default theme paints a background on the notebook's pages. If you wish to suppress this theme, for aesthetic or performance reasons, there are three ways of doing it. You can use {Wx::NB_NOPAGETHEME} to disable themed drawing for a particular notebook, you can call {Wx::SystemOptions.set_option} to disable it for the whole application, or you can disable it for individual pages by using {Wx::Notebook#set_background_colour}.
   # To disable themed pages globally: 
-  # ```
-  #   wxSystemOptions::SetOption("msw.notebook.themed-background", 0);
+  # ```ruby
+  #   Wx::SystemOptions.set_option("msw.notebook.themed-background", 0)
   # ```
   # 
   # Set the value to 1 to enable it again. To give a single page a solid background that more or less fits in with the overall theme, use: 
-  # ```
-  #   wxColour col = notebook->GetThemeBackgroundColour();
-  #   if (col.IsOk())
-  #   {
-  #       page->SetBackgroundColour(col);
-  #   }
+  # ```ruby
+  #   col = notebook.get_theme_background_colour
+  #   page.set_background_colour(col) if col.ok?
   # ```
   # 
   # On platforms other than Windows, or if the application is not using Windows themes, {Wx::Notebook#get_theme_background_colour} will return an uninitialised colour object, and the above code will therefore work on all platforms.
   # === 
   # 
-  # Category:  Book Controls  <div class='appearance'><span class='appearance'>Appearance:</span><table><tr><td> {Wx::MSW} Appearance
-  #   </td><td> {Wx::GTK} Appearance
-  #   </td><td> {Wx::OSX} Appearance
+  # Category:  Book Controls  <div class='appearance'><span class='appearance'>Appearance:</span><table><tr><td> wxMSW Appearance
+  #   </td><td> wxGTK Appearance
+  #   </td><td> wxOSX Appearance
   #   </td></tr></table></div>
   # @see Wx::BookCtrl
   # @see  Wx::BookCtrlEvent
@@ -115,7 +120,7 @@ module Wx
   
     # @overload initialize()
     #   Constructs a notebook control.
-    #   @return [Notebook]
+    #   @return [Wx::Notebook]
     # @overload initialize(parent, id, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=0, name=Wx::NotebookNameStr)
     #   Constructs a notebook control.
     #   Note that sometimes you can reduce flicker by passing the {Wx::CLIP_CHILDREN} window style.
@@ -125,7 +130,7 @@ module Wx
     #   @param size [Array(Integer, Integer), Wx::Size]  The window size.
     #   @param style [Integer]  The window style. See {Wx::Notebook}.
     #   @param name [String]  The name of the control.
-    #   @return [Notebook]
+    #   @return [Wx::Notebook]
     def initialize(*args) end
     
     # Creates a notebook control.
@@ -151,7 +156,7 @@ module Wx
     alias_method :theme_background_colour, :get_theme_background_colour
     
     # Sets the amount of space around each page's icon and label, in pixels.
-    # The vertical padding cannot be changed in {Wx::GTK}.
+    # The vertical padding cannot be changed in wxGTK.
     # @param padding [Array(Integer, Integer), Wx::Size] 
     # @return [void]
     def set_padding(padding) end

data/lib/wx/doc/gen/number_entry_dialog.rb

@@ -36,7 +36,7 @@ module Wx
     # @overload initialize()
     #   Default constructor.
     #   Call {Wx::NumberEntryDialog#create} to really create the dialog later.
-    #   @return [NumberEntryDialog]
+    #   @return [Wx::NumberEntryDialog]
     # @overload initialize(parent, message, prompt, caption, value, min, max, pos=Wx::DEFAULT_POSITION)
     #   Constructor.
     #   Use {Wx::NumberEntryDialog#show_modal} to show the dialog.
@@ -49,7 +49,7 @@ module Wx
     #   @param min [Integer] 
     #   @param max [Integer] 
     #   @param pos [Array(Integer, Integer), Wx::Point] 
-    #   @return [NumberEntryDialog]
+    #   @return [Wx::NumberEntryDialog]
     def initialize(*args) end
     
     # @param parent [Wx::Window]  Parent window.

data/lib/wx/doc/gen/object.rb

@@ -30,12 +30,12 @@ module Wx
   
     # @overload initialize()
     #   Default ctor; initializes to NULL the internal reference data.
-    #   @return [Object]
+    #   @return [Wx::Object]
     # @overload initialize(other)
     #   Copy ctor.
     #   Sets the internal {Wx::Object::m_refData} pointer to point to the same instance of the {Wx::ObjectRefData}-derived class pointed by other and increments the refcount of {Wx::Object::m_refData}.
     #   @param other [Wx::Object] 
-    #   @return [Object]
+    #   @return [Wx::Object]
     def initialize(*args) end
     
     # Returns true if this object has the same data pointer as obj.

data/lib/wx/doc/gen/palette.rb

@@ -27,11 +27,11 @@ module Wx
   
     # @overload initialize()
     #   Default constructor.
-    #   @return [Palette]
+    #   @return [Wx::Palette]
     # @overload initialize(palette)
     #   Copy constructor, uses Reference Counting.
     #   @param palette [Wx::Palette]  A reference to the palette to copy.
-    #   @return [Palette]
+    #   @return [Wx::Palette]
     # @overload initialize(n, red, green, blue)
     #   Creates a palette from arrays of size n, one for each red, blue or green component.
     #   
@@ -40,7 +40,7 @@ module Wx
     #   @param red [unsigned char]  An array of red values.
     #   @param green [unsigned char]  An array of green values.
     #   @param blue [unsigned char]  An array of blue values.
-    #   @return [Palette]
+    #   @return [Wx::Palette]
     def initialize(*args) end
     
     # Creates a palette from arrays of size n, one for each red, blue or green component.

data/lib/wx/doc/gen/panel.rb

@@ -7,7 +7,7 @@
 module Wx
 
   # A panel is a window on which controls are placed.
-  # It is usually placed within a frame. Its main feature over its parent class {Wx::Window} is code for handling child windows and TAB traversal, which is implemented natively if possible (e.g. in {Wx::GTK}) or by wxWidgets itself otherwise.
+  # It is usually placed within a frame. Its main feature over its parent class {Wx::Window} is code for handling child windows and TAB traversal, which is implemented natively if possible (e.g. in wxGTK) or by wxWidgets itself otherwise.
   # Tab traversal is implemented through an otherwise undocumented intermediate {Wx::ControlContainer} class from which any class can derive in addition to the normal {Wx::Window} base class. Please see <code>Wx::/containr.h</code> and <code>Wx::/panel.h</code> to find out how this is achieved.
   # 
   # if not all characters are being intercepted by your OnKeyDown or OnChar handler, it may be because you are using the {Wx::TAB_TRAVERSAL} style, which grabs some keypresses for use by child controls.
@@ -18,6 +18,7 @@ module Wx
   # 
   # The following event-handler methods redirect the events to member method or handler blocks for {Wx::NavigationKeyEvent} events.
   # Event handler methods for events emitted by this class:
+  # 
   # - {Wx::EvtHandler#evt_navigation_key}(meth = nil, &block): Process a navigation key event. 
   # 
   # === 
@@ -30,7 +31,7 @@ module Wx
   
     # @overload initialize()
     #   Default constructor.
-    #   @return [Panel]
+    #   @return [Wx::Panel]
     # @overload initialize(parent, id=Wx::StandardID::ID_ANY, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::TAB_TRAVERSAL, name=Wx::PanelNameStr)
     #   Constructor.
     #   
@@ -41,7 +42,7 @@ module Wx
     #   @param size [Array(Integer, Integer), Wx::Size]  The panel size. The value {Wx::DEFAULT_SIZE} indicates a default size, chosen by either the windowing system or wxWidgets, depending on platform.
     #   @param style [Integer]  The window style. See {Wx::Panel}.
     #   @param name [String]  Window name.
-    #   @return [Panel]
+    #   @return [Wx::Panel]
     def initialize(*args) end
     
     # This method is overridden from {Wx::Window#accepts_focus} and returns true only if there is no child window in the panel which can accept the focus.

data/lib/wx/doc/gen/pen.rb

@@ -8,7 +8,7 @@ module Wx
 
   # The possible styles for a {Wx::Pen}.
   # 
-  # Note that hatched pen styles are not supported by X11-based ports, including {Wx::GTK}.
+  # Note that hatched pen styles are not supported by X11-based ports, including wxGTK.
   # 
   class PenStyle < Wx::Enum
   
@@ -92,8 +92,8 @@ module Wx
   
   # Possible values for pen quality.
   # 
-  # Pen quality is currently only used in {Wx::MSW}, the other ports ignore it and always use the same default pen quality.
-  # In {Wx::MSW} the choice of quality affects whether "cosmetic" or "geometric" native pens are used in situations when both are usable. Notably, for dotted and dashed pens of width 1, high quality geometric pens are used by default since wxWidgets 3.1.4, while previous versions used lower quality but much faster cosmetic pens. If drawing performance is more important than the exact appearance of the lines drawn using this pen, low quality may be explicitly selected.
+  # Pen quality is currently only used in wxMSW, the other ports ignore it and always use the same default pen quality.
+  # In wxMSW the choice of quality affects whether "cosmetic" or "geometric" native pens are used in situations when both are usable. Notably, for dotted and dashed pens of width 1, high quality geometric pens are used by default since wxWidgets 3.1.4, while previous versions used lower quality but much faster cosmetic pens. If drawing performance is more important than the exact appearance of the lines drawn using this pen, low quality may be explicitly selected.
   # See {Wx::PenInfo#quality} and {Wx::Pen#set_quality}.
   # 
   class PenQuality < Wx::Enum
@@ -175,18 +175,31 @@ module Wx
   # 
   # Category:  Graphics Device Interface (GDI)
   # Predefined objects/pointers: 
+  # 
   # - {Wx::NULL_PEN} 
+  # 
   # - {Wx::BLACK_DASHED_PEN} 
+  # 
   # - {Wx::BLACK_PEN} 
+  # 
   # - {Wx::BLUE_PEN} 
+  # 
   # - {Wx::CYAN_PEN} 
+  # 
   # - {Wx::GREEN_PEN} 
+  # 
   # - {Wx::YELLOW_PEN} 
+  # 
   # - {Wx::GREY_PEN} 
+  # 
   # - {Wx::LIGHT_GREY_PEN} 
+  # 
   # - {Wx::MEDIUM_GREY_PEN} 
+  # 
   # - {Wx::RED_PEN} 
+  # 
   # - {Wx::TRANSPARENT_PEN} 
+  # 
   # - {Wx::WHITE_PEN}
   # @see Wx::PenList
   # @see  Wx::DC
@@ -217,7 +230,7 @@ module Wx
     # @overload initialize()
     #   Default constructor.
     #   The pen will be uninitialised, and {Wx::Pen#is_ok} will return false.
-    #   @return [Pen]
+    #   @return [Wx::Pen]
     # @overload initialize(colour, width=1, style=Wx::PenStyle::PENSTYLE_SOLID)
     #   Constructs a pen from a colour object, pen width and style.
     #   Different versions of Windows and different versions of other platforms support very different subsets of the styles above so handle with care.
@@ -227,19 +240,19 @@ module Wx
     #   @param colour [Wx::Colour,String,Symbol]  A colour object.
     #   @param width [Integer]  Pen width. Under Windows, the pen width cannot be greater than 1 if the style is {Wx::PenStyle::PENSTYLE_DOT}, {Wx::PenStyle::PENSTYLE_LONG_DASH}, {Wx::PenStyle::PENSTYLE_SHORT_DASH}, {Wx::PenStyle::PENSTYLE_DOT_DASH}, or {Wx::PenStyle::PENSTYLE_USER_DASH}.
     #   @param style [PenStyle]  The style may be one of the {Wx::PenStyle} values.
-    #   @return [Pen]
+    #   @return [Wx::Pen]
     # @overload initialize(stipple, width)
     #   Constructs a stippled pen from a stipple bitmap and a width.
-    #   Availability:  only available for the {Wx::MSW}, {Wx::OSX/Cocoa} ports.  {Wx::msw},{Wx::osx}
+    #   Availability:  only available for the wxMSW, wxOSX/Cocoa ports.  {Wx::msw},{Wx::osx}
     #   @see Wx::Pen#set_width
     #   @see  Wx::Pen#set_stipple 
     #   @param stipple [Wx::Bitmap]  A stipple bitmap.
     #   @param width [Integer]  Pen width. Under Windows, the pen width cannot be greater than 1 if the style is {Wx::PenStyle::PENSTYLE_DOT}, {Wx::PenStyle::PENSTYLE_LONG_DASH}, {Wx::PenStyle::PENSTYLE_SHORT_DASH}, {Wx::PenStyle::PENSTYLE_DOT_DASH}, or {Wx::PenStyle::PENSTYLE_USER_DASH}.
-    #   @return [Pen]
+    #   @return [Wx::Pen]
     # @overload initialize(pen)
     #   Copy constructor, uses Reference Counting.
     #   @param pen [Wx::Pen]  A pointer or reference to a pen to copy.
-    #   @return [Pen]
+    #   @return [Wx::Pen]
     def initialize(*args) end
     
     # Returns the pen cap style, which may be one of {Wx::PenCap::CAP_ROUND}, {Wx::PenCap::CAP_PROJECTING} and {Wx::PenCap::CAP_BUTT}.
@@ -332,7 +345,7 @@ module Wx
     alias_method :cap=, :set_cap
     
     # Sets the pen quality.
-    # Explicitly selecting low pen quality may be useful in {Wx::MSW} if drawing performance is more important than the exact appearance of the lines drawn with this pen.
+    # Explicitly selecting low pen quality may be useful in wxMSW if drawing performance is more important than the exact appearance of the lines drawn with this pen.
     # @see Wx::PenQuality
     # @param quality [PenQuality] 
     # @return [void]
@@ -389,8 +402,8 @@ module Wx
   
   # This class is a helper used for {Wx::Pen} creation using named parameter idiom: it allows specifying various {Wx::Pen} attributes using the chained calls to its clearly named methods instead of passing them in the fixed order to {Wx::Pen} constructors.
   # For instance, to create a dotted blue pen with the given join style you could do 
-  # ```
-  #   wxPen pen(wxPenInfo(*wxBLUE).Style(wxPENSTYLE_DOT).Join(wxJOIN_BEVEL));
+  # ```ruby
+  #   pen = Wx::Pen.new(Wx::PenInfo.new(Wx::BLUE).style(Wx::PENSTYLE_DOT).join(Wx::JOIN_BEVEL))  
   # ```
   # 
   # 
@@ -400,7 +413,7 @@ module Wx
     # @param colour [Wx::Colour,String,Symbol] 
     # @param width [Integer] 
     # @param style [PenStyle] 
-    # @return [PenInfo]
+    # @return [Wx::PenInfo]
     def initialize(colour=(Wx::Colour.new()), width=1, style=Wx::PenStyle::PENSTYLE_SOLID) end
     
     # @param col [Wx::Colour,String,Symbol] 

data/lib/wx/doc/gen/pg/numeric_property_validator.rb

@@ -33,7 +33,7 @@ module Wx::PG
     
     # @param numericType [NumericType] 
     # @param base [Integer] 
-    # @return [NumericPropertyValidator]
+    # @return [Wx::PG::NumericPropertyValidator]
     def initialize(numericType, base=10) end
     
     # Validates the window contents against the include or exclude lists, depending on the validator style.

data/lib/wx/doc/gen/pg/pg_array_editor_dialog.rb

@@ -52,7 +52,7 @@ module Wx::PG
   # 
   class PGArrayEditorDialog < Dialog
   
-    # @return [PGArrayEditorDialog]
+    # @return [Wx::PG::PGArrayEditorDialog]
     def initialize; end
     
     # @return [void]
@@ -215,7 +215,7 @@ module Wx::PG
   # 
   class PGArrayStringEditorDialog < PGArrayEditorDialog
   
-    # @return [PGArrayStringEditorDialog]
+    # @return [Wx::PG::PGArrayStringEditorDialog]
     def initialize; end
     
     # @return [void]
@@ -233,7 +233,7 @@ module Wx::PG
     alias_method :dialog_value, :get_dialog_value
     
     # @param custBtText [String] 
-    # @param pcc [Wx::ArrayStringProperty] 
+    # @param pcc [Wx::PG::ArrayStringProperty] 
     # @return [void]
     def set_custom_button(custBtText, pcc) end
     

data/lib/wx/doc/gen/pg/pg_cell.rb

@@ -14,22 +14,22 @@ module Wx::PG
   class PGCell < Object
   
     # @overload initialize()
-    #   @return [PGCell]
+    #   @return [Wx::PG::PGCell]
     # @overload initialize(other)
-    #   @param other [Wx::PGCell] 
-    #   @return [PGCell]
+    #   @param other [Wx::PG::PGCell] 
+    #   @return [Wx::PG::PGCell]
     # @overload initialize(text, bitmap=(Wx::BitmapBundle.new()), fgCol=Wx::NULL_COLOUR, bgCol=Wx::NULL_COLOUR)
     #   @param text [String] 
     #   @param bitmap [Wx::BitmapBundle,Wx::Bitmap,Wx::Icon,Wx::Image] 
     #   @param fgCol [Wx::Colour,String,Symbol] 
     #   @param bgCol [Wx::Colour,String,Symbol] 
-    #   @return [PGCell]
+    #   @return [Wx::PG::PGCell]
     def initialize(*args) end
     
     # @overload get_data()
-    #   @return [Wx::PGCellData]
+    #   @return [Wx::PG::PGCellData]
     # @overload get_data()
-    #   @return [Wx::PGCellData]
+    #   @return [Wx::PG::PGCellData]
     def get_data(*args) end
     alias_method :data, :get_data
     
@@ -43,7 +43,7 @@ module Wx::PG
     def set_empty_data; end
     
     # Merges valid data from srcCell into this.
-    # @param srcCell [Wx::PGCell] 
+    # @param srcCell [Wx::PG::PGCell] 
     # @return [void]
     def merge_from(srcCell) end
     
@@ -105,7 +105,7 @@ module Wx::PG
   # 
   class PGCellData < ::Object
   
-    # @return [PGCellData]
+    # @return [Wx::PG::PGCellData]
     def initialize; end
     
     # @param text [String] 
@@ -141,14 +141,14 @@ module Wx::PG
   class PGChoiceEntry < PGCell
   
     # @overload initialize()
-    #   @return [PGChoiceEntry]
+    #   @return [Wx::PG::PGChoiceEntry]
     # @overload initialize(other)
-    #   @param other [Wx::PGChoiceEntry] 
-    #   @return [PGChoiceEntry]
+    #   @param other [Wx::PG::PGChoiceEntry] 
+    #   @return [Wx::PG::PGChoiceEntry]
     # @overload initialize(label, value=Wx::PG::PG_INVALID_VALUE)
     #   @param label [String] 
     #   @param value [Integer] 
-    #   @return [PGChoiceEntry]
+    #   @return [Wx::PG::PGChoiceEntry]
     def initialize(*args) end
     
     # @param value [Integer]