wxruby3 0.9.0.pre.rc.2-x64-mingw-ucrt → 0.9.0-x64-mingw-ucrt

data/lib/wx/doc/gen/pg/property_grid_interface.rb

@@ -7,7 +7,8 @@
 module Wx::PG
 
   # Most of the shared property manipulation interface shared by {Wx::PG::PropertyGrid}, {Wx::PG::PropertyGridPage}, and {Wx::PG::PropertyGridManager} is defined in this class.
-  # - In separate {Wx::PG::PropertyGrid} component this class was known as {Wx::PropertyContainerMethods}.- {Wx::PG::PropertyGridInterface}'s property operation member functions all accept a special {Wx::PGPropArg} id argument, using which you can refer to properties either by their pointer (for performance) or by their name (for conveniency).
+  # - In separate {Wx::PG::PropertyGrid} component this class was known as {Wx::PropertyContainerMethods}.
+  # - {Wx::PG::PropertyGridInterface}'s property operation member functions all accept a special {Wx::PGPropArg} id argument, using which you can refer to properties either by their pointer (for performance) or by their name (for conveniency).
   # 
   # === 
   # 
@@ -56,14 +57,17 @@ module Wx::PG
     # Appends property to the list.
     # {Wx::PG::PropertyGrid} assumes ownership of the object. Becomes child of most recently added category.
     # 
-    # - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.- If appending a category with name identical to a category already in the {Wx::PG::PropertyGrid}, then newly created category is deleted, and most recently added category (under which properties are appended) is set to the one with same name. This allows easier adding of items to same categories in multiple passes.- Does not automatically redraw the control, so you may need to call Refresh() when calling this function after control has been shown for the first time.- This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
-    # @param property [Wx::PGProperty] 
+    # - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.
+    # - If appending a category with name identical to a category already in the {Wx::PG::PropertyGrid}, then newly created category is deleted, and most recently added category (under which properties are appended) is set to the one with same name. This allows easier adding of items to same categories in multiple passes.
+    # - Does not automatically redraw the control, so you may need to call Refresh() when calling this function after control has been shown for the first time.
+    # - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # @param property [Wx::PG::PGProperty] 
     # @return [Wx::PG::PGProperty]
     def append(property) end
     
     # Same as {Wx::PG::PropertyGridInterface#append}, but appends under given parent property.
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to parent property.
-    # @param newProperty [Wx::PGProperty]  Property to be added.
+    # @param newProperty [Wx::PG::PGProperty]  Property to be added.
     # @return [Wx::PG::PGProperty]
     def append_in(id, newProperty) end
     
@@ -84,8 +88,8 @@ module Wx::PG
     # 
     # In wxWidgets 2.9 and later, this function no longer sends {Wx::PG_EVT_SELECTED}.
     # @see Wx::PG::PropertyGrid#select_property 
-    # @param validation [true,false]  If set to false, deselecting the property will always work, even if its editor had invalid value in it.
-    # @return [true,false]
+    # @param validation [Boolean]  If set to false, deselecting the property will always work, even if its editor had invalid value in it.
+    # @return [Boolean]
     def clear_selection(validation=false) end
     
     # Resets modified status of all properties.
@@ -97,14 +101,14 @@ module Wx::PG
     # 
     # This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def collapse(id) end
     
     # Collapses all items that can be collapsed.
     # Return false if failed (may fail if editor value cannot be validated).
     # 
     # This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
-    # @return [true,false]
+    # @return [Boolean]
     def collapse_all; end
     
     # Changes value of a property, as if by user.
@@ -114,7 +118,7 @@ module Wx::PG
     # Returns true if value was successfully changed.
     # @param id [String,Wx::PG::PGProperty] 
     # @param newValue [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue] 
-    # @return [true,false]
+    # @return [Boolean]
     def change_property_value(id, newValue) end
     
     # Removes and deletes a property and any children.
@@ -130,12 +134,12 @@ module Wx::PG
     # @see Wx::PG::PropertyGridInterface#enable_property
     # @see  Wx::PG::PGProperty#enable 
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def disable_property(id) end
     
     # Returns true if all property grid data changes have been committed.
     # Usually only returns false if value in active editor has been invalidated by a {Wx::Validator}.
-    # @return [true,false]
+    # @return [Boolean]
     def editor_validate; end
     
     # Enables or disables property.
@@ -144,8 +148,8 @@ module Wx::PG
     # Property is refreshed with new settings.
     # @see Wx::PG::PGProperty#enable 
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
-    # @param enable [true,false]  If false, property is disabled instead.
-    # @return [true,false]
+    # @param enable [Boolean]  If false, property is disabled instead.
+    # @return [Boolean]
     def enable_property(id, enable=true) end
     
     # Called after population of property with fixed children has finished.
@@ -160,13 +164,13 @@ module Wx::PG
     # 
     # This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def expand(id) end
     
     # Expands all items that can be expanded.
     # This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
-    # @param expand [true,false] 
-    # @return [true,false]
+    # @param expand [Boolean] 
+    # @return [Boolean]
     def expand_all(expand=true) end
     
     # Returns auto-resize proportion of the given column.
@@ -184,14 +188,9 @@ module Wx::PG
     def get_first_child(id) end
     alias_method :first_child, :get_first_child
     
-    # @overload get_first(flags=Wx::PG::PG_ITERATOR_FLAGS::PG_ITERATE_ALL)
-    #   Returns id of first item that matches given criteria.
-    #   @param flags [Integer]  See wxPropertyGridIterator Flags.
-    #   @return [Wx::PG::PGProperty]
-    # @overload get_first(flags=Wx::PG::PG_ITERATOR_FLAGS::PG_ITERATE_ALL)
-    #   @param flags [Integer] 
-    #   @return [Wx::PGProperty]
-    def get_first(*args) end
+    # @param flags [Integer] 
+    # @return [Wx::PG::PGProperty]
+    def get_first(flags=Wx::PG::PG_ITERATOR_FLAGS::PG_ITERATE_ALL) end
     alias_method :first, :get_first
     
     # Returns pointer to a property with given name (case-sensitive).
@@ -204,8 +203,8 @@ module Wx::PG
     
     # Adds to targetArr pointers to properties that have given flags set.
     # However, if inverse is set to true, then only properties without given flags are stored.
-    # @param flags [Wx::PGProperty::FlagType]  Property flags to use.
-    # @param inverse [true,false]  If false, properties that have given flags are stored, otherwise there are stored only properties without given flags.
+    # @param flags [Integer]  Property flags to use.
+    # @param inverse [Boolean]  If false, properties that have given flags are stored, otherwise there are stored only properties without given flags.
     # @param iterFlags [Integer]  Iterator flags to use. Default is everything expect private children. See wxPropertyGridIterator Flags.
     # @return [Array<Wx::PG::PGProperty>]
     def get_properties_with_flag(flags, inverse=false, iterFlags=((Wx::PG::PG_ITERATOR_FLAGS::PG_ITERATE_PROPERTIES|Wx::PG::PG_ITERATOR_FLAGS::PG_ITERATE_HIDDEN|Wx::PG::PG_ITERATOR_FLAGS::PG_ITERATE_CATEGORIES))) end
@@ -228,7 +227,7 @@ module Wx::PG
     # Returns pointer of property's nearest parent category.
     # If no category found, returns NULL.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [Wx::PropertyCategory]
+    # @return [Wx::PG::PropertyCategory]
     def get_property_category(id) end
     alias_method :property_category, :get_property_category
     
@@ -262,7 +261,7 @@ module Wx::PG
     
     # Returns property's editor.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [Wx::PGEditor]
+    # @return [Wx::PG::PGEditor]
     def get_property_editor(id) end
     alias_method :property_editor, :get_property_editor
     
@@ -285,7 +284,7 @@ module Wx::PG
     alias_method :property_label, :get_property_label
     
     # Returns property's name, by which it is globally accessible.
-    # @param property [Wx::PGProperty] 
+    # @param property [Wx::PG::PGProperty] 
     # @return [String]
     def get_property_name(property) end
     alias_method :property_name, :get_property_name
@@ -329,7 +328,7 @@ module Wx::PG
     
     # Returns property's value as bool.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def get_property_value_as_bool(id) end
     alias_method :property_value_as_bool, :get_property_value_as_bool
     
@@ -385,7 +384,7 @@ module Wx::PG
     # Returns a {Wx::Variant} list containing {Wx::Variant} versions of all property values.
     # Order is not guaranteed.
     # @param listname [String]  Name of the returned {Wx::Variant} list.
-    # @param baseparent [Wx::PGProperty]  The base property which children properties will be queried for values.
+    # @param baseparent [Wx::PG::PGProperty]  The base property which children properties will be queried for values.
     # @param flags [Integer]  Use {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_KEEP_STRUCTURE} to retain category structure; each sub category will be its own {Wx::VariantList} of {Wx::Variant}. Use {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_INC_ATTRIBUTES} to include property attributes as well. Each attribute will be stored as list variant named "@<propname>@attr."
     # @return [Wx::Variant]
     def get_property_values(listname=(''), baseparent=nil, flags=0) end
@@ -393,7 +392,7 @@ module Wx::PG
     
     # Returns list of currently selected properties.
     # {Wx::ArrayPGProperty} should be compatible with std::vector API.
-    # @return [Wx::ArrayPGProperty]
+    # @return [Array<Wx::PG::PGProperty>]
     def get_selected_properties; end
     alias_method :selected_properties, :get_selected_properties
     
@@ -406,33 +405,35 @@ module Wx::PG
     
     # Hides or reveals a property.
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
-    # @param hide [true,false]  If true, hides property, otherwise reveals it.
+    # @param hide [Boolean]  If true, hides property, otherwise reveals it.
     # @param flags [Integer]  By default changes are applied recursively. Set this parameter {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_DONT_RECURSE} to prevent this.
-    # @return [true,false]
+    # @return [Boolean]
     def hide_property(id, hide=true, flags=Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE) end
     
     # @overload insert(priorThis, newProperty)
     #   Inserts property to the property container.
     #   Returns newProperty.
     #   
-    #   - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.- While Append may be faster way to add items, make note that when both types of data storage (categoric and non-categoric) are active, Insert becomes even more slow. This is especially true if current mode is non-categoric.- This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    #   - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.
+    #   - While Append may be faster way to add items, make note that when both types of data storage (categoric and non-categoric) are active, Insert becomes even more slow. This is especially true if current mode is non-categoric.
+    #   - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
     #   
     #   Example of use:
     #   
-    #   ```
-    #     // append category
-    #     wxPGProperty* my_cat_id = propertygrid->Append( new wxPropertyCategory("My Category") );
+    #   ```ruby
+    #     # append category
+    #     my_cat_id = propertygrid.append(Wx::PG::PropertyCategory.new("My Category"))
     #     
     #     ...
     #     
-    #     // insert into category - using second variant
-    #     wxPGProperty* my_item_id_1 = propertygrid->Insert( my_cat_id, 0, new wxStringProperty("My String 1") );
+    #     # insert into category - using second overload
+    #     my_item_id_1 = propertygrid.insert(my_cat_id, 0, Wx::PG::StringProperty.new("My String 1"))
     #     
-    #     // insert before to first item - using first variant
-    #     wxPGProperty* my_item_id_2 = propertygrid->Insert( my_item_id, new wxStringProperty("My String 2") );
+    #     # insert before to first item - using first overload
+    #     my_item_id_2 = propertygrid.insert(my_item_id, Wx::PG::StringProperty.new("My String 2"))
     #   ```
     #   @param priorThis [String,Wx::PG::PGProperty]  New property is inserted just prior to this. Available only in the first variant. There are two versions of this function to allow this parameter to be either an id or name to a property.
-    #   @param newProperty [Wx::PGProperty]  Pointer to the inserted property. {Wx::PG::PropertyGrid} will take ownership of this object.
+    #   @param newProperty [Wx::PG::PGProperty]  Pointer to the inserted property. {Wx::PG::PropertyGrid} will take ownership of this object.
     #   @return [Wx::PG::PGProperty]
     # @overload insert(parent, index, newProperty)
     #   Inserts property to the property container.
@@ -441,58 +442,58 @@ module Wx::PG
     #   Returns newProperty.
     #   @param parent [String,Wx::PG::PGProperty]  New property is inserted under this category. Available only in the second variant. There are two versions of this function to allow this parameter to be either an id or name to a property.
     #   @param index [Integer]  Index under category. Available only in the second variant. If index is < 0, property is appended in category.
-    #   @param newProperty [Wx::PGProperty]  Pointer to the inserted property. {Wx::PG::PropertyGrid} will take ownership of this object.
+    #   @param newProperty [Wx::PG::PGProperty]  Pointer to the inserted property. {Wx::PG::PropertyGrid} will take ownership of this object.
     #   @return [Wx::PG::PGProperty]
     def insert(*args) end
     
     # Returns true if property is a category.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_property_category(id) end
     alias_method :property_category?, :is_property_category
     
     # Returns true if property is enabled.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_property_enabled(id) end
     alias_method :property_enabled?, :is_property_enabled
     
     # Returns true if given property is expanded.
     # Naturally, always returns false for properties that cannot be expanded.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_property_expanded(id) end
     alias_method :property_expanded?, :is_property_expanded
     
     # Returns true if property has been modified after value set or modify flag clear by software.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_property_modified(id) end
     alias_method :property_modified?, :is_property_modified
     
     # Returns true if property is selected.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_property_selected(id) end
     alias_method :property_selected?, :is_property_selected
     
     # Returns true if property is shown (i.e.
     # {Wx::PG::PropertyGridInterface#hide_property} with true not called for it).
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_property_shown(id) end
     alias_method :property_shown?, :is_property_shown
     
     # Returns true if property value is set to unspecified.
     # @param id [String,Wx::PG::PGProperty] 
-    # @return [true,false]
+    # @return [Boolean]
     def is_property_value_unspecified(id) end
     alias_method :property_value_unspecified?, :is_property_value_unspecified
     
     # Disables (limit = true) or enables (limit = false) {Wx::TextCtrl} editor of a property, if it is not the sole mean to edit the value.
     # Property is refreshed with new settings.
     # @param id [String,Wx::PG::PGProperty] 
-    # @param limit [true,false] 
+    # @param limit [Boolean] 
     # @return [void]
     def limit_property_editing(id, limit=true) end
     
@@ -504,13 +505,12 @@ module Wx::PG
     # Replaces property with id with newly created one.
     # For example, this code replaces existing property named "Flags" with one that will have different set of items:
     # 
-    # ```
-    #   pg->ReplaceProperty("Flags",
-    #       wxFlagsProperty("Flags", wxPG_LABEL, newItems))
+    # ```ruby
+    #   pg.replace_property("Flags", Wx::PG::FlagsProperty.new("Flags", Wx::PG::PG_LABEL, newItems))
     # ```
     # @see Wx::PG::PropertyGridInterface#insert 
     # @param id [String,Wx::PG::PGProperty] 
-    # @param property [Wx::PGProperty] 
+    # @param property [Wx::PG::PGProperty] 
     # @return [Wx::PG::PGProperty]
     def replace_property(id, property) end
     
@@ -522,7 +522,7 @@ module Wx::PG
     # If some parts of state (such as scrolled or splitter position) fail to restore correctly, please make sure that you call this function after {Wx::PG::PropertyGrid} size has been set (this may sometimes be tricky when sizers are used).
     # @param src [String]  String generated by SaveEditableState.
     # @param restoreStates [Integer]  Which parts to restore from source string. See list of editable state flags.
-    # @return [true,false]
+    # @return [Boolean]
     def restore_editable_state(src, restoreStates=Wx::PG::PropertyGridPage::EditableStateFlags::AllStates) end
     
     # Used to acquire user-editable state (selected property, expanded properties, scrolled position, splitter positions).
@@ -538,11 +538,12 @@ module Wx::PG
     # @see Wx::PG::PropertyGridInterface#get_column_proportion 
     # @param column [Integer] 
     # @param proportion [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def set_column_proportion(column, proportion) end
     
     # Sets an attribute for this property.
-    # - Setting attribute's value to {Wx::NullVariant} will simply remove it from property's set of attributes.- Property is refreshed with new settings.
+    # - Setting attribute's value to {Wx::NullVariant} will simply remove it from property's set of attributes.
+    # - Property is refreshed with new settings.
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
     # @param attrName [String]  Text identifier of attribute. See wxPropertyGrid Property Attribute Identifiers.
     # @param value [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue]  Value of attribute.
@@ -559,7 +560,8 @@ module Wx::PG
     def set_property_attribute_all(attrName, value) end
     
     # Sets background colour of given property.
-    # - If category is tried to set recursively, only its children are affected.- Property is redrawn with new colour.
+    # - If category is tried to set recursively, only its children are affected.
+    # - Property is redrawn with new colour.
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param colour [Wx::Colour,String,Symbol]  New background colour.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE} which causes colour to be set recursively. Omit this flag to only set colour for the property in question and not any of its children.
@@ -567,7 +569,8 @@ module Wx::PG
     def set_property_background_colour(id, colour, flags=Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE) end
     
     # Sets text, bitmap, and colours for given column's cell.
-    # - You can set label cell by using column 0.- You can use {Wx::PG::PG_LABEL} as text to use default text for column.
+    # - You can set label cell by using column 0.
+    # - You can use {Wx::PG::PG_LABEL} as text to use default text for column.
     # @param id [String,Wx::PG::PGProperty] 
     # @param column [Integer] 
     # @param text [String] 
@@ -585,7 +588,8 @@ module Wx::PG
     def set_property_client_data(id, clientData) end
     
     # Resets text and background colours of given property.
-    # - If category is tried to set recursively, only its children are affected.- Property is redrawn with new colours.
+    # - If category is tried to set recursively, only its children are affected.
+    # - Property is redrawn with new colours.
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_DONT_RECURSE} which causes colour to be reset only for the property in question (for backward compatibility).
     # @return [void]
@@ -596,7 +600,7 @@ module Wx::PG
     #   Sets editor for a property.
     #   For custom editors, use pointer you received from {Wx::PG::PropertyGrid.register_editor_class}.
     #   @param id [String,Wx::PG::PGProperty]  Property name or pointer to a property.
-    #   @param editor [Wx::PGEditor]  For builtin editors, use {Wx::PGEditor_X}, where X is builtin editor's name (TextCtrl, Choice, etc. see {Wx::PG::PGEditor} documentation for full list).
+    #   @param editor [Wx::PG::PGEditor]  For builtin editors, use {Wx::PGEditor_X}, where X is builtin editor's name (TextCtrl, Choice, etc. see {Wx::PG::PGEditor} documentation for full list).
     #   @return [void]
     # @overload set_property_editor(id, editorName)
     #   Sets editor control of a property.
@@ -622,9 +626,10 @@ module Wx::PG
     # Sets property (and, recursively, its children) to have read-only value.
     # In other words, user cannot change the value in the editor, but they can still copy it.
     # 
-    # - This is mainly for use with textctrl editor. Only some other editors fully support it.- Property is refreshed with new settings.
+    # - This is mainly for use with textctrl editor. Only some other editors fully support it.
+    # - Property is refreshed with new settings.
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
-    # @param set [true,false]  Use true to enable read-only, false to disable it.
+    # @param set [Boolean]  Use true to enable read-only, false to disable it.
     # @param flags [Integer]  By default changes are applied recursively. Set this parameter to {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_DONT_RECURSE} to prevent this.
     # @return [void]
     def set_property_read_only(id, set=true, flags=Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE) end
@@ -669,11 +674,12 @@ module Wx::PG
     # @see Wx::PG::PGProperty#set_max_length. 
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param maxLen [Integer]  Maximum number of characters of the text the user can enter in the text editor. If it is 0, the length is not limited and the text can be as long as it is supported by the underlying native text control widget.
-    # @return [true,false]
+    # @return [Boolean]
     def set_property_max_length(id, maxLen) end
     
     # Sets text colour of given property.
-    # - If category is tried to set recursively, only its children are affected.- Property is redrawn with new colour.
+    # - If category is tried to set recursively, only its children are affected.
+    # - Property is redrawn with new colour.
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param colour [Wx::Colour,String,Symbol]  New text colour.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE} which causes colour to be set recursively. Omit this flag to only set colour for the property in question and not any of its children.
@@ -704,7 +710,7 @@ module Wx::PG
     # @overload set_property_value(id, value)
     #   Sets value (bool) of a property.
     #   @param id [String,Wx::PG::PGProperty] 
-    #   @param value [true,false] 
+    #   @param value [Boolean] 
     #   @return [void]
     # @overload set_property_value(id, value)
     #   Sets value (wchar_t*) of a property.
@@ -819,7 +825,7 @@ module Wx::PG
     
     # 
     # This function reselects the property and may cause excess flicker, so to just call Refresh() on a rect of single property, call DrawItem() instead.
-    # @param p [Wx::PGProperty] 
+    # @param p [Wx::PG::PGProperty] 
     # @return [void]
     def refresh_property(p) end