wxruby3 0.9.0.pre.beta.8-x64-mingw-ucrt

data/lib/wx/doc/gen/fs_file.rb

@@ -0,0 +1,269 @@
+# :stopdoc:
+# This file is automatically generated by the WXRuby3 documentation 
+# generator. Do not alter this file.
+# :startdoc:
+
+
+module Wx
+
+  # Open Bit Flags.
+  # 
+  # 
+  # 
+  class FileSystemOpenFlags < Wx::Enum
+  
+    # Open for reading.
+    # 
+    FS_READ = Wx::FileSystemOpenFlags.new(1)
+    
+    # Returned stream will be seekable.
+    # 
+    FS_SEEKABLE = Wx::FileSystemOpenFlags.new(4)
+    
+  end # FileSystemOpenFlags
+  
+  # This class represents a single file opened by {Wx::FileSystem}.
+  # It provides more information than wxWidgets' input streams (stream, filename, mime type, anchor).
+  # Any pointer returned by a method of {Wx::FSFile} is valid only as long as the {Wx::FSFile} object exists. For example a call to {Wx::FSFile#get_stream} doesn't create the stream but only returns the pointer to it. In other words after 10 calls to {Wx::FSFile#get_stream} you will have obtained ten identical pointers.
+  # 
+  # === 
+  # 
+  # Category:  Virtual File System, File Handling
+  # @see Wx::FileSystemHandler
+  # @see  Wx::FileSystem
+  # @see  wxFileSystem Overview 
+  # 
+  # 
+  class FSFile < Object
+  
+    # Constructor.
+    # You probably won't use it. See the Note for details.
+    # It is seldom used by the application programmer but you will need it if you are writing your own virtual FS. For example you may need something similar to {Wx::MemoryInputStream}, but because {Wx::MemoryInputStream} doesn't free the memory when destroyed and thus passing a memory stream pointer into {Wx::FSFile} constructor would lead to memory leaks, you can write your own class derived from {Wx::FSFile}:
+    # 
+    #   class wxMyFSFile : public wxFSFile
+    #   {
+    #       private:
+    #           void *m_Mem;
+    #       public:
+    #           wxMyFSFile(.....)
+    #           ~wxMyFSFile() {free(m_Mem);}
+    #               // of course dtor is virtual ;-)
+    #   };
+    # 
+    # If you are not sure of the meaning of these params, see the description of the GetXXXX() functions.
+    # @param stream [IO]  The input stream that will be used to access data
+    # @param location [String]  The full location (aka filename) of the file
+    # @param mimetype [String]  MIME type of this file. It may be left empty, in which case the type will be determined from file's extension (location must not be empty in this case).
+    # @param anchor [String]  Anchor. See {Wx::FSFile#get_anchor} for details.
+    # @param modif [Wx::DateTime]  Modification date and time for this file.
+    # @return [FSFile]
+    def initialize(stream, location, mimetype, anchor, modif) end
+    
+    # Detaches the stream from the {Wx::FSFile} object.
+    # That is, the stream obtained with {Wx::FSFile#get_stream} will continue its existence after the {Wx::FSFile} object is deleted.
+    # You will have to delete the stream yourself.
+    # @return [Wx::InputStream]
+    def detach_stream; end
+    
+    # Returns anchor (if present).
+    # The term of <b>anchor</b> can be easily explained using few examples:
+    # index.htm#anchor                      // 'anchor' is anchor
+    # index/{Wx::001}.htm                       // NO anchor here!
+    # archive/main.zip#zip:index.htm#global // 'global'
+    # archive/main.zip#zip:index.htm        // NO anchor here!
+    # 
+    # Usually an anchor is presented only if the MIME type is 'text/html'. But it may have some meaning with other files; for example myanim.avi#200 may refer to position in animation or reality.wrl::MyView may refer to a predefined view in VRML.
+    # @return [Wx::String]
+    def get_anchor; end
+    alias_method :anchor, :get_anchor
+    
+    # Returns full location of the file, including path and protocol.
+    # Examples: http://www.{Wx::widgets}.org
+    # http://www.ms.mff.cuni.cz/~vsla8348/{Wx::html}/archive.zip#zip:info.txt
+    # file:/home/vasek/index.htm
+    # relative-file.htm
+    # @return [Wx::String]
+    def get_location; end
+    alias_method :location, :get_location
+    
+    # Returns the MIME type of the content of this file.
+    # It is either extension-based (see {Wx::MimeTypesManager}) or extracted from HTTP protocol Content-Type header.
+    # @return [Wx::String]
+    def get_mime_type; end
+    alias_method :mime_type, :get_mime_type
+    
+    # Returns time when this file was modified.
+    # @return [Wx::DateTime]
+    def get_modification_time; end
+    alias_method :modification_time, :get_modification_time
+    
+    # Returns pointer to the stream.
+    # You can use the returned stream to directly access data. You may suppose that the stream provide Seek and GetSize functionality (even in the case of the HTTP protocol which doesn't provide this by default. {Wx::HTML} uses local cache to work around this and to speed up the connection).
+    # @return [Wx::InputStream]
+    def get_stream; end
+    alias_method :stream, :get_stream
+    
+  end # FSFile
+  
+  # This class is the base class of most stream related classes in wxWidgets.
+  # It must not be used directly.
+  # === 
+  # 
+  # Category:  {Wx::Streams}
+  # @see Wx::StreamBuffer 
+  # 
+  # 
+  class StreamBase < ::Object
+  
+    # Creates a dummy stream object.
+    # It doesn't do anything.
+    # @return [StreamBase]
+    def initialize; end
+    
+    # This function returns the last error.
+    # @return [Wx::StreamError]
+    def get_last_error; end
+    alias_method :last_error, :get_last_error
+    
+    # Returns the length of the stream in bytes.
+    # If the length cannot be determined (this is always the case for socket streams for example), returns {Wx::InvalidOffset}.
+    # @return [Wx::FileOffset]
+    def get_length; end
+    alias_method :length, :get_length
+    
+    # This function returns the size of the stream.
+    # For example, for a file it is the size of the file.
+    # There are streams which do not have size by definition, such as socket streams. In that cases, {Wx::StreamBase#get_size} returns 0 so you should always test its return value.
+    # @return [Integer]
+    def get_size; end
+    alias_method :size, :get_size
+    
+    # Returns true if no error occurred on the stream.
+    # 
+    # @see Wx::StreamBase#get_last_error 
+    # @return [true,false]
+    def is_ok; end
+    alias_method :ok?, :is_ok
+    
+    # Returns true if the stream supports seeking to arbitrary offsets.
+    # @return [true,false]
+    def is_seekable; end
+    alias_method :seekable?, :is_seekable
+    
+    # Resets the stream state.
+    # By default, resets the stream to good state, i.e. clears any errors. Since wxWidgets 2.9.3 can be also used to explicitly set the state to the specified error (the error argument didn't exist in the previous versions).
+    # @see Wx::StreamBase#get_last_error 
+    # @param error [Wx::StreamError] 
+    # @return [void]
+    def reset(error=Wx::STREAM_NO_ERROR) end
+    
+  end # StreamBase
+  
+  # {Wx::InputStream} is an abstract base class which may not be used directly.
+  # It is the base class of all streams which provide a {Wx::InputStream#read} function, i.e. which can be used to read data from a source (e.g. a file, a socket, etc).
+  # If you want to create your own input stream, you'll need to derive from this class and implement the protected {Wx::InputStream#on_sys_read} function only.
+  # === 
+  # 
+  # Category:  {Wx::Streams}
+  # 
+  class InputStream < StreamBase
+  
+    # Creates a dummy input stream.
+    # @return [InputStream]
+    def initialize; end
+    
+    # Returns true if some data is available in the stream right now, so that calling {Wx::InputStream#read} wouldn't block.
+    # @return [true,false]
+    def can_read; end
+    alias_method :can_read?, :can_read
+    
+    # Returns true after an attempt has been made to read past the end of the stream.
+    # @return [true,false]
+    def eof; end
+    
+    # Returns the first character in the input queue and removes it, blocking until it appears if necessary.
+    # On success returns a value between 0 - 255; on end of file returns {Wx::EOF}.
+    # @return [Integer]
+    def get_c; end
+    alias_method :c, :get_c
+    
+    # Returns the last number of bytes read.
+    # @return [Integer]
+    def last_read; end
+    
+    # Returns the first character in the input queue without removing it.
+    # @return [Integer]
+    def peek; end
+    
+    # Reads data from the input queue and stores it in the specified output stream.
+    # The data is read until an error is raised by one of the two streams.
+    # This function returns a reference on the current object, so the user can test any states of the stream right away.
+    # @param stream_out [IO,Wx::OutputStream] 
+    # @return [Wx::InputStream]
+    def read(stream_out) end
+    
+    # Changes the stream current position.
+    # This operation in general is possible only for seekable streams (see {Wx::StreamBase#is_seekable}); non-seekable streams support only seeking positive amounts in mode {Wx::FromCurrent} (this is implemented by reading data and simply discarding it).
+    # 
+    # The new stream position or {Wx::InvalidOffset} on error.
+    # @param pos [Wx::FileOffset]  Offset to seek to.
+    # @param mode [Wx::SeekMode]  One of {Wx::FromStart}, {Wx::FromEnd}, {Wx::FromCurrent}.
+    # @return [Wx::FileOffset]
+    def seek_i(pos, mode=Wx::FROM_START) end
+    
+    # Returns the current stream position or {Wx::InvalidOffset} if it's not available (e.g.
+    # socket streams do not have a size nor a current stream position).
+    # @return [Wx::FileOffset]
+    def tell_i; end
+    
+    # This function acts like the previous one except that it takes only one character: it is sometimes shorter to use than the generic function.
+    # @param c [Integer] 
+    # @return [true,false]
+    def ungetch(c) end
+    
+  end # InputStream
+  
+  # {Wx::OutputStream} is an abstract base class which may not be used directly.
+  # It is the base class of all streams which provide a {Wx::OutputStream#write} function, i.e. which can be used to output data (e.g. to a file, to a socket, etc).
+  # If you want to create your own output stream, you'll need to derive from this class and implement the protected {Wx::OutputStream#on_sys_write} function only.
+  # === 
+  # 
+  # Category:  {Wx::Streams}
+  # 
+  class OutputStream < StreamBase
+  
+    # Creates a dummy {Wx::OutputStream} object.
+    # @return [OutputStream]
+    def initialize; end
+    
+    # Closes the stream, returning false if an error occurs.
+    # The stream is closed implicitly in the destructor if {Wx::OutputStream#close} is not called explicitly.
+    # If this stream wraps another stream or some other resource such as a file, then the underlying resource is closed too if it is owned by this stream, or left open otherwise.
+    # @return [true,false]
+    def close; end
+    
+    # Returns the number of bytes written during the last {Wx::OutputStream#write}.
+    # It may return 0 even if there is no error on the stream if it is only temporarily impossible to write to it.
+    # @return [Integer]
+    def last_write; end
+    
+    # Puts the specified character in the output queue and increments the stream position.
+    # @param c [Integer] 
+    # @return [void]
+    def put_c(c) end
+    
+    # Changes the stream current position.
+    # The new stream position or {Wx::InvalidOffset} on error.
+    # @param pos [Wx::FileOffset]  Offset to seek to.
+    # @param mode [Wx::SeekMode]  One of {Wx::FromStart}, {Wx::FromEnd}, {Wx::FromCurrent}.
+    # @return [Wx::FileOffset]
+    def seek_o(pos, mode=Wx::FROM_START) end
+    
+    # Returns the current stream position.
+    # @return [Wx::FileOffset]
+    def tell_o; end
+    
+  end # OutputStream
+  
+
+end

data/lib/wx/doc/gen/functions.rb

@@ -0,0 +1,10 @@
+# :stopdoc:
+# This file is automatically generated by the WXRuby3 documentation 
+# generator. Do not alter this file.
+# :startdoc:
+
+
+module Wx
+
+
+end

data/lib/wx/doc/gen/gauge.rb

@@ -0,0 +1,127 @@
+# :stopdoc:
+# This file is automatically generated by the WXRuby3 documentation 
+# generator. Do not alter this file.
+# :startdoc:
+
+
+module Wx
+
+  # 
+  GA_HORIZONTAL = 4
+  
+  # 
+  GA_VERTICAL = 8
+  
+  # 
+  GA_PROGRESS = 16
+  
+  # 
+  GA_SMOOTH = 32
+  
+  # 
+  GA_TEXT = 64
+  
+  # A gauge is a horizontal or vertical bar which shows a quantity (often time).
+  # {Wx::Gauge} supports two working modes: determinate and indeterminate progress.
+  # The first is the usual working mode (see {Wx::Gauge#set_value} and {Wx::Gauge#set_range}) while the second can be used when the program is doing some processing but you don't know how much progress is being done. In this case, you can periodically call the {Wx::Gauge#pulse} function to make the progress bar switch to indeterminate mode (graphically it's usually a set of blocks which move or bounce in the bar control).
+  # {Wx::Gauge} supports dynamic switch between these two work modes.
+  # There are no user commands for the gauge.
+  # === Styles
+  # 
+  # This class supports the following styles:
+  #  
+  # - {Wx::GA_HORIZONTAL}: Creates a horizontal gauge. 
+  # - {Wx::GA_VERTICAL}: Creates a vertical gauge. 
+  # - {Wx::GA_SMOOTH}: Creates smooth progress bar with one pixel wide update step (not supported by all platforms). 
+  # - {Wx::GA_TEXT}: Display the current value in percents in the gauge itself. This style is only supported in {Wx::Qt} and ignored under the other platforms. This flag is only available in wxWidgets 3.1.0 and later. 
+  # - {Wx::GA_PROGRESS}: Reflect the value of gauge in the application taskbar button under Windows 7 and later and the dock icon under macOS, ignored under the other platforms. This flag is only available in wxWidgets 3.1.0 and later. 
+  # 
+  # === 
+  # 
+  # Category:  {Wx::Controls}  <div class='appearance'><span class='appearance'>Appearance:</span><table><tr><td> {Wx::MSW} Appearance
+  #   </td><td> {Wx::GTK} Appearance
+  #   </td><td> {Wx::OSX} Appearance
+  #   </td></tr></table></div>
+  # @see Wx::Slider
+  # @see  Wx::ScrollBar 
+  # 
+  # 
+  class Gauge < Control
+  
+    # @overload initialize()
+    #   Default constructor.
+    #   @return [Gauge]
+    # @overload initialize(parent, id, range, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::GA_HORIZONTAL, validator=Wx::DEFAULT_VALIDATOR, name=Wx::GAUGE_NAME_STR)
+    #   Constructor, creating and showing a gauge.
+    #   
+    #   @see Wx::Gauge#create 
+    #   @param parent [Wx::Window]  Window parent.
+    #   @param id [Integer]  Window identifier.
+    #   @param range [Integer]  Integer range (maximum value) of the gauge. See {Wx::Gauge#set_range} for more details about the meaning of this value when using the gauge in indeterminate mode.
+    #   @param pos [Array(Integer, Integer), Wx::Point]  Window position.
+    #   @param size [Array(Integer, Integer), Wx::Size]  Window size.
+    #   @param style [Integer]  Gauge style.
+    #   @param validator [Wx::Validator]  Window validator.
+    #   @param name [String]  Window name.
+    #   @return [Gauge]
+    def initialize(*args) end
+    
+    # Creates the gauge for two-step construction.
+    # See {Wx::Gauge#gauge} for further details.
+    # @param parent [Wx::Window] 
+    # @param id [Integer] 
+    # @param range [Integer] 
+    # @param pos [Array(Integer, Integer), Wx::Point] 
+    # @param size [Array(Integer, Integer), Wx::Size] 
+    # @param style [Integer] 
+    # @param validator [Wx::Validator] 
+    # @param name [String] 
+    # @return [true,false]
+    def create(parent, id, range, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::GA_HORIZONTAL, validator=Wx::DEFAULT_VALIDATOR, name=Wx::GAUGE_NAME_STR) end
+    
+    # Returns the maximum position of the gauge.
+    # 
+    # @see Wx::Gauge#set_range 
+    # @return [Integer]
+    def get_range; end
+    alias_method :range, :get_range
+    
+    # Returns the current position of the gauge.
+    # 
+    # @see Wx::Gauge#set_value 
+    # @return [Integer]
+    def get_value; end
+    alias_method :value, :get_value
+    
+    # Returns true if the gauge is vertical (has {Wx::GA_VERTICAL} style) and false otherwise.
+    # @return [true,false]
+    def is_vertical; end
+    alias_method :vertical?, :is_vertical
+    
+    # Switch the gauge to indeterminate mode (if required) and makes the gauge move a bit to indicate the user that some progress has been made.
+    # After calling this function the value returned by {Wx::Gauge#get_value} is undefined and thus you need to explicitly call {Wx::Gauge#set_value} if you want to restore the determinate mode.
+    # @return [void]
+    def pulse; end
+    
+    # Sets the range (maximum value) of the gauge.
+    # This function makes the gauge switch to determinate mode, if it's not already.
+    # When the gauge is in indeterminate mode, under {Wx::MSW} the gauge repeatedly goes from zero to range and back; under other ports when in indeterminate mode, the range setting is ignored.
+    # @see Wx::Gauge#get_range 
+    # @param range [Integer] 
+    # @return [void]
+    def set_range(range) end
+    alias_method :range=, :set_range
+    
+    # Sets the position of the gauge.
+    # The pos must be between 0 and the gauge range as returned by {Wx::Gauge#get_range}, inclusive.
+    # This function makes the gauge switch to determinate mode, if it was in indeterminate mode before.
+    # @see Wx::Gauge#get_value 
+    # @param pos [Integer]  Position for the gauge level.
+    # @return [void]
+    def set_value(pos) end
+    alias_method :value=, :set_value
+    
+  end # Gauge
+  
+
+end

data/lib/wx/doc/gen/gb_sizer_item.rb

@@ -0,0 +1,78 @@
+# :stopdoc:
+# This file is automatically generated by the WXRuby3 documentation 
+# generator. Do not alter this file.
+# :startdoc:
+
+
+module Wx
+
+  # The {Wx::GBSizerItem} class is used by the {Wx::GridBagSizer} for tracking the items in the sizer.
+  # It adds grid position and spanning information to the normal {Wx::SizerItem} by adding {Wx::GBPosition} and {Wx::GBSpan} attributes. Most of the time you will not need to use a {Wx::GBSizerItem} directly in your code, but there are a couple of cases where it is handy.
+  # === 
+  # 
+  # Category:  Window Layout
+  # 
+  class GBSizerItem < SizerItem
+  
+    # @overload get_pos()
+    #   Get the grid position of the item.
+    #   @return [Wx::GBPosition]
+    # @overload get_pos(row, col)
+    #   Get the grid position of the item.
+    #   @param row [int] 
+    #   @param col [int] 
+    #   @return [void]
+    def get_pos(*args) end
+    alias_method :pos, :get_pos
+    
+    # @overload get_span()
+    #   Get the row and column spanning of the item.
+    #   @return [Wx::GBSpan]
+    # @overload get_span(rowspan, colspan)
+    #   Get the row and column spanning of the item.
+    #   @param rowspan [int] 
+    #   @param colspan [int] 
+    #   @return [void]
+    def get_span(*args) end
+    alias_method :span, :get_span
+    
+    # Get the row and column of the endpoint of this item.
+    # @param row [int] 
+    # @param col [int] 
+    # @return [void]
+    def get_end_pos(row, col) end
+    alias_method :end_pos, :get_end_pos
+    
+    # @overload intersects(other)
+    #   Returns true if this item and the other item intersect.
+    #   @param other [Wx::GBSizerItem] 
+    #   @return [true,false]
+    # @overload intersects(pos, span)
+    #   Returns true if the given pos/span would intersect with this item.
+    #   @param pos [Wx::GBPosition] 
+    #   @param span [Wx::GBSpan] 
+    #   @return [true,false]
+    def intersects(*args) end
+    
+    # If the item is already a member of a sizer then first ensure that there is no other item that would intersect with this one at the new position, then set the new position.
+    # Returns true if the change is successful and after the next Layout the item will be moved.
+    # @param pos [Wx::GBPosition] 
+    # @return [true,false]
+    def set_pos(pos) end
+    alias_method :pos=, :set_pos
+    
+    # If the item is already a member of a sizer then first ensure that there is no other item that would intersect with this one with its new spanning size, then set the new spanning.
+    # Returns true if the change is successful and after the next Layout the item will be resized.
+    # @param span [Wx::GBSpan] 
+    # @return [true,false]
+    def set_span(span) end
+    alias_method :span=, :set_span
+    
+    # @return [Wx::GridBagSizer]
+    def get_gb_sizer; end
+    alias_method :gb_sizer, :get_gb_sizer
+    
+  end # GBSizerItem
+  
+
+end

data/lib/wx/doc/gen/gcdc.rb

@@ -0,0 +1,61 @@
+# :stopdoc:
+# This file is automatically generated by the WXRuby3 documentation 
+# generator. Do not alter this file.
+# :startdoc:
+
+
+module Wx
+
+  # {Wx::GCDC} is a device context that draws on a {Wx::GraphicsContext}.
+  # {Wx::GCDC} does its best to implement {Wx::DC} API, but the following features are not (fully) implemented because {Wx::GraphicsContext} doesn't support them:
+  # 
+  # - {Wx::GCDC#get_pixel} method is not implemented and always returns false because modern graphics layers don't support retrieving the contents of the drawn pixels.- {Wx::GCDC#flood_fill} method is not, and can't be, implemented, as its functionality relies on reading the pixels from {Wx::GraphicsContext} too.- {Wx::GCDC#set_logical_function} method only works with {Wx::RasterOperationMode::COPY}, {Wx::RasterOperationMode::OR}, {Wx::RasterOperationMode::NO_OP}, {Wx::RasterOperationMode::CLEAR} and {Wx::RasterOperationMode::XOR} functions, attempts to use any other function (including {Wx::RasterOperationMode::INVERT}) don't do anything.- Similarly, {Wx::RasterOperationMode} parameter of {Wx::GCDC#blit} and {Wx::GCDC#stretch_blit} can only be one of the supported logical functions listed above, using any other function will result in an assertion failure and not drawing anything.- For Direct2D-based {Wx::GraphicsContext}, only true-type fonts can be used in the font-related functions.
+  # 
+  # === 
+  # 
+  # Category:  Device Contexts
+  # @see Wx::DC
+  # @see  Wx::GraphicsContext 
+  # 
+  # 
+  class GCDC < DC
+  
+    # @overload initialize(windowDC)
+    #   Constructs a {Wx::GCDC} from a {Wx::WindowDC}.
+    #   @param windowDC [Wx::WindowDC] 
+    #   @return [GCDC]
+    # @overload initialize(memoryDC)
+    #   Constructs a {Wx::GCDC} from a {Wx::MemoryDC}.
+    #   @param memoryDC [Wx::MemoryDC] 
+    #   @return [GCDC]
+    # @overload initialize(printerDC)
+    #   Constructs a {Wx::GCDC} from a {Wx::PRT::PrinterDC}.
+    #   @param printerDC [Wx::PrinterDC] 
+    #   @return [GCDC]
+    # @overload initialize(context)
+    #   Construct a {Wx::GCDC} from an existing graphics context.
+    #   Note that this object takes ownership of context and will delete it when it is destroyed or when {Wx::GCDC#set_graphics_context} is called with a different context object.
+    #   Also notice that context will continue using the same font, pen and brush as before until {Wx::GCDC#set_font}, {Wx::GCDC#set_pen} or {Wx::GCDC#set_brush} is explicitly called to change them. This means that the code can use this {Wx::DC}-derived object to work using pens and brushes with alpha component, for example (which normally isn't supported by {Wx::DC} API), but it also means that the return values of {Wx::GCDC#get_font}, {Wx::GCDC#get_pen} and {Wx::GCDC#get_brush} won't really correspond to the actually used objects because they simply can't represent them anyhow. If you wish to avoid such discrepancy, you need to call the setter methods to bring {Wx::DC} and {Wx::GraphicsContext} font, pen and brush in sync with each other.
+    #   @param context [Wx::GraphicsContext] 
+    #   @return [GCDC]
+    # @overload initialize()
+    #   @return [GCDC]
+    def initialize(*args) end
+    
+    # Retrieves associated {Wx::GraphicsContext}.
+    # @return [Wx::GraphicsContext]
+    def get_graphics_context; end
+    alias_method :graphics_context, :get_graphics_context
+    
+    # Set the graphics context to be used for this {Wx::GCDC}.
+    # Note that this object takes ownership of context and will delete it when it is destroyed or when {Wx::GCDC#set_graphics_context} is called again.
+    # Also, unlike the constructor taking {Wx::GraphicsContext}, this method will reapply the current font, pen and brush, so that this object continues to use them, if they had been changed before (which is never the case when constructing {Wx::GCDC} directly from {Wx::GraphicsContext}).
+    # @param context [Wx::GraphicsContext] 
+    # @return [void]
+    def set_graphics_context(context) end
+    alias_method :graphics_context=, :set_graphics_context
+    
+  end # GCDC
+  
+
+end