wxruby3 0.9.0-x64-mingw-ucrt → 0.9.2-x64-mingw-ucrt

data/lib/wx/doc/gen/pg/property_grid_interface.rb

@@ -7,21 +7,28 @@
 module Wx::PG
 
   # Most of the shared property manipulation interface shared by {Wx::PG::PropertyGrid}, {Wx::PG::PropertyGridPage}, and {Wx::PG::PropertyGridManager} is defined in this class.
+  # <div class="wxrb-remark">
+  # <b>Remark:</b>
+  # <p>
+  # 
   # - In separate {Wx::PG::PropertyGrid} component this class was known as {Wx::PropertyContainerMethods}.
   # - {Wx::PG::PropertyGridInterface}'s property operation member functions all accept a special {Wx::PGPropArg} id argument, using which you can refer to properties either by their pointer (for performance) or by their name (for conveniency).
   # 
-  # === 
+  # </p>
+  # </div>>
   # 
   # Category:  {Wx::PG::PropertyGrid}
   # 
   # 
   # @note  In wxRuby this is a mixin module instead of a (base) class.
+  # @wxrb_require USE_PROPGRID
   module PropertyGridInterface
   
     # 
     # 
     # Flags for {Wx::PG::PropertyGridInterface#save_editable_state} and {Wx::PG::PropertyGridInterface#restore_editable_state}.
     # 
+    # @wxrb_require USE_PROPGRID
     class EditableStateFlags < Wx::Enum
     
       # Include selected property.
@@ -57,10 +64,17 @@ module Wx::PG
     # Appends property to the list.
     # {Wx::PG::PropertyGrid} assumes ownership of the object. Becomes child of most recently added category.
     # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.
     # - If appending a category with name identical to a category already in the {Wx::PG::PropertyGrid}, then newly created category is deleted, and most recently added category (under which properties are appended) is set to the one with same name. This allows easier adding of items to same categories in multiple passes.
     # - Does not automatically redraw the control, so you may need to call Refresh() when calling this function after control has been shown for the first time.
-    # - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # 
+    # </p>
+    # </div>>
     # @param property [Wx::PG::PGProperty] 
     # @return [Wx::PG::PGProperty]
     def append(property) end
@@ -79,14 +93,22 @@ module Wx::PG
     def begin_add_children(id) end
     
     # Deletes all properties.
-    # This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>>
     # @return [void]
     def clear; end
     
     # Clears current selection, if any.
     # Returns true if successful or if there was no selection. May fail if validation was enabled and active editor had invalid value.
     # 
-    # In wxWidgets 2.9 and later, this function no longer sends {Wx::PG_EVT_SELECTED}.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>In wxWidgets 2.9 and later, this function no longer sends {Wx::PG_EVT_SELECTED}.
+    # </p>
+    # </div>>
     # @see Wx::PG::PropertyGrid#select_property 
     # @param validation [Boolean]  If set to false, deselecting the property will always work, even if its editor had invalid value in it.
     # @return [Boolean]
@@ -99,7 +121,11 @@ module Wx::PG
     # Collapses given category or property with children.
     # Returns true if actually collapsed.
     # 
-    # This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Boolean]
     def collapse(id) end
@@ -107,13 +133,22 @@ module Wx::PG
     # Collapses all items that can be collapsed.
     # Return false if failed (may fail if editor value cannot be validated).
     # 
-    # This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>>
     # @return [Boolean]
     def collapse_all; end
     
     # Changes value of a property, as if by user.
     # Use this instead of {Wx::PG::PropertyGridInterface#set_property_value} if you need the value to run through validation process, and also send {Wx::PG::EVT_PG_CHANGED}.
-    # Since this function sends {Wx::PG::EVT_PG_CHANGED}, it should not be called from EVT_PG_CHANGED handler.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Since this function sends {Wx::PG::EVT_PG_CHANGED}, it should not be called from EVT_PG_CHANGED handler.
+    # </p>
+    # </div>>
     # 
     # Returns true if value was successfully changed.
     # @param id [String,Wx::PG::PGProperty] 
@@ -122,7 +157,11 @@ module Wx::PG
     def change_property_value(id, newValue) end
     
     # Removes and deletes a property and any children.
-    # If you delete a property in a {Wx::PG::PropertyGrid} event handler, the actual deletion is postponed until the next idle event.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If you delete a property in a {Wx::PG::PropertyGrid} event handler, the actual deletion is postponed until the next idle event.
+    # </p>
+    # </div>>
     # 
     # This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
     # @param id [String,Wx::PG::PGProperty]  Pointer or name of a property.
@@ -130,7 +169,11 @@ module Wx::PG
     def delete_property(id) end
     
     # Disables a property.
-    # Property is refreshed with new settings.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Property is refreshed with new settings.
+    # </p>
+    # </div>>
     # @see Wx::PG::PropertyGridInterface#enable_property
     # @see  Wx::PG::PGProperty#enable 
     # @param id [String,Wx::PG::PGProperty] 
@@ -145,7 +188,11 @@ module Wx::PG
     # Enables or disables property.
     # Disabled property usually appears as having grey text.
     # 
-    # Property is refreshed with new settings.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Property is refreshed with new settings.
+    # </p>
+    # </div>>
     # @see Wx::PG::PGProperty#enable 
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
     # @param enable [Boolean]  If false, property is disabled instead.
@@ -162,13 +209,21 @@ module Wx::PG
     # Expands given category or property with children.
     # Returns true if actually expanded.
     # 
-    # This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This function may deselect selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Boolean]
     def expand(id) end
     
     # Expands all items that can be expanded.
-    # This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This functions clears selection. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value. 
+    # </p>
+    # </div>>
     # @param expand [Boolean] 
     # @return [Boolean]
     def expand_all(expand=true) end
@@ -182,7 +237,11 @@ module Wx::PG
     alias_method :column_proportion, :get_column_proportion
     
     # Returns id of first child of given property.
-    # Does not return private children!
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Does not return private children! 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Wx::PG::PGProperty]
     def get_first_child(id) end
@@ -195,7 +254,12 @@ module Wx::PG
     
     # Returns pointer to a property with given name (case-sensitive).
     # If there is no property with such name, NULL pointer is returned.
-    # Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>".
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>". 
+    # </p>
+    # </div>>
     # @param name [String] 
     # @return [Wx::PG::PGProperty]
     def get_property(name) end
@@ -247,7 +311,12 @@ module Wx::PG
     # @overload get_property_by_name(name)
     #   Returns pointer to a property with given name (case-sensitive).
     #   If there is no property with such name, NULL pointer is returned.
-    #   Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>".
+    #   
+    #   <div class="wxrb-remark">
+    #   <b>Remark:</b>
+    #   <p>Properties which have non-category, non-root parent cannot be accessed globally by their name. Instead, use "<property>.<subproperty>" instead of "<subproperty>". 
+    #   </p>
+    #   </div>>
     #   @param name [String] 
     #   @return [Wx::PG::PGProperty]
     # @overload get_property_by_name(name, subname)
@@ -304,6 +373,7 @@ module Wx::PG
     # Returns validator of a property as a reference, which you can pass to any number of SetPropertyValidator.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Wx::Validator]
+    # @wxrb_require USE_VALIDATORS
     def get_property_validator(id) end
     alias_method :property_validator, :get_property_validator
     
@@ -335,6 +405,7 @@ module Wx::PG
     # Return's property's value as {Wx::DateTime}.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Time,Date,DateTime]
+    # @wxrb_require USE_DATETIME
     def get_property_value_as_date_time(id) end
     alias_method :property_value_as_date_time, :get_property_value_as_date_time
     
@@ -359,6 +430,7 @@ module Wx::PG
     # Returns property's value as native signed 64-bit integer.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Integer]
+    # @wxrb_require USE_LONGLONG
     def get_property_value_as_long_long(id) end
     alias_method :property_value_as_long_long, :get_property_value_as_long_long
     
@@ -378,6 +450,7 @@ module Wx::PG
     # Returns property's value as native unsigned 64-bit integer.
     # @param id [String,Wx::PG::PGProperty] 
     # @return [Integer]
+    # @wxrb_require USE_LONGLONG
     def get_property_value_as_u_long_long(id) end
     alias_method :property_value_as_u_long_long, :get_property_value_as_u_long_long
     
@@ -391,14 +464,23 @@ module Wx::PG
     alias_method :property_values, :get_property_values
     
     # Returns list of currently selected properties.
-    # {Wx::ArrayPGProperty} should be compatible with std::vector API.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>{Wx::ArrayPGProperty} should be compatible with std::vector API. 
+    # </p>
+    # </div>>
     # @return [Array<Wx::PG::PGProperty>]
     def get_selected_properties; end
     alias_method :selected_properties, :get_selected_properties
     
     # Returns currently selected property.
     # NULL if none.
-    # When {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_MULTIPLE_SELECTION} extra style is used, this member function returns the focused property, that is the one which can have active editor.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>When {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_MULTIPLE_SELECTION} extra style is used, this member function returns the focused property, that is the one which can have active editor. 
+    # </p>
+    # </div>>
     # @return [Wx::PG::PGProperty]
     def get_selection; end
     alias_method :selection, :get_selection
@@ -414,6 +496,12 @@ module Wx::PG
     #   Inserts property to the property container.
     #   Returns newProperty.
     #   
+    #   <div class="wxrb-remark">
+    #   <b>Remark:</b>
+    #   <p>
+    #   </p>
+    #   </div>>
+    #   
     #   - {Wx::PG::PropertyGrid} takes the ownership of the property pointer.
     #   - While Append may be faster way to add items, make note that when both types of data storage (categoric and non-categoric) are active, Insert becomes even more slow. This is especially true if current mode is non-categoric.
     #   - This functions deselects selected property, if any. Validation failure option {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_STAY_IN_PROPERTY} is not respected, i.e. selection is cleared even if editor had invalid value.
@@ -491,7 +579,11 @@ module Wx::PG
     alias_method :property_value_unspecified?, :is_property_value_unspecified
     
     # Disables (limit = true) or enables (limit = false) {Wx::TextCtrl} editor of a property, if it is not the sole mean to edit the value.
-    # Property is refreshed with new settings.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Property is refreshed with new settings. 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @param limit [Boolean] 
     # @return [void]
@@ -519,7 +611,11 @@ module Wx::PG
     # 
     # Returns false if there was problem reading the string.
     # 
-    # If some parts of state (such as scrolled or splitter position) fail to restore correctly, please make sure that you call this function after {Wx::PG::PropertyGrid} size has been set (this may sometimes be tricky when sizers are used).
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If some parts of state (such as scrolled or splitter position) fail to restore correctly, please make sure that you call this function after {Wx::PG::PropertyGrid} size has been set (this may sometimes be tricky when sizers are used). 
+    # </p>
+    # </div>>
     # @param src [String]  String generated by SaveEditableState.
     # @param restoreStates [Integer]  Which parts to restore from source string. See list of editable state flags.
     # @return [Boolean]
@@ -534,7 +630,11 @@ module Wx::PG
     # {Wx::PG::PG_WINDOW_STYLES::PG_SPLITTER_AUTO_CENTER} window style needs to be used to indicate that columns are auto- resizable.
     # Returns false on failure.
     # 
-    # You should call this for individual pages of {Wx::PG::PropertyGridManager} (if used).
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>You should call this for individual pages of {Wx::PG::PropertyGridManager} (if used).
+    # </p>
+    # </div>>
     # @see Wx::PG::PropertyGridInterface#get_column_proportion 
     # @param column [Integer] 
     # @param proportion [Integer] 
@@ -542,8 +642,15 @@ module Wx::PG
     def set_column_proportion(column, proportion) end
     
     # Sets an attribute for this property.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - Setting attribute's value to {Wx::NullVariant} will simply remove it from property's set of attributes.
-    # - Property is refreshed with new settings.
+    # - Property is refreshed with new settings. 
+    # 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty]  Name or pointer to a property.
     # @param attrName [String]  Text identifier of attribute. See wxPropertyGrid Property Attribute Identifiers.
     # @param value [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue]  Value of attribute.
@@ -553,15 +660,27 @@ module Wx::PG
     
     # Sets property attribute for all applicable properties.
     # Be sure to use this method only after all properties have been added to the grid.
-    # Properties are refreshed with new settings.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Properties are refreshed with new settings. 
+    # </p>
+    # </div>>
     # @param attrName [String] 
     # @param value [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue] 
     # @return [void]
     def set_property_attribute_all(attrName, value) end
     
     # Sets background colour of given property.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - If category is tried to set recursively, only its children are affected.
-    # - Property is redrawn with new colour.
+    # - Property is redrawn with new colour. 
+    # 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param colour [Wx::Colour,String,Symbol]  New background colour.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE} which causes colour to be set recursively. Omit this flag to only set colour for the property in question and not any of its children.
@@ -569,8 +688,15 @@ module Wx::PG
     def set_property_background_colour(id, colour, flags=Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE) end
     
     # Sets text, bitmap, and colours for given column's cell.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - You can set label cell by using column 0.
-    # - You can use {Wx::PG::PG_LABEL} as text to use default text for column.
+    # - You can use {Wx::PG::PG_LABEL} as text to use default text for column. 
+    # 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @param column [Integer] 
     # @param text [String] 
@@ -581,15 +707,26 @@ module Wx::PG
     def set_property_cell(id, column, text=(''), bitmap=(Wx::BitmapBundle.new()), fgCol=Wx::NULL_COLOUR, bgCol=Wx::NULL_COLOUR) end
     
     # Sets client data (void*) of a property.
-    # This untyped client data has to be deleted manually.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This untyped client data has to be deleted manually. 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @param clientData [Object] 
     # @return [void]
     def set_property_client_data(id, clientData) end
     
     # Resets text and background colours of given property.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - If category is tried to set recursively, only its children are affected.
-    # - Property is redrawn with new colours.
+    # - Property is redrawn with new colours. 
+    # 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_DONT_RECURSE} which causes colour to be reset only for the property in question (for backward compatibility).
     # @return [void]
@@ -611,7 +748,14 @@ module Wx::PG
     def set_property_editor(*args) end
     
     # Sets label of a property.
-    # - Properties under same parent may have same labels. However, property names must still remain unique.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
+    # - Properties under same parent may have same labels. However, property names must still remain unique. 
+    # 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @param newproplabel [String] 
     # @return [void]
@@ -626,8 +770,15 @@ module Wx::PG
     # Sets property (and, recursively, its children) to have read-only value.
     # In other words, user cannot change the value in the editor, but they can still copy it.
     # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - This is mainly for use with textctrl editor. Only some other editors fully support it.
-    # - Property is refreshed with new settings.
+    # - Property is refreshed with new settings. 
+    # 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param set [Boolean]  Use true to enable read-only, false to disable it.
     # @param flags [Integer]  By default changes are applied recursively. Set this parameter to {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_DONT_RECURSE} to prevent this.
@@ -656,14 +807,22 @@ module Wx::PG
     alias_method :property_values=, :set_property_values
     
     # Associates the help string with property.
-    # By default, text is shown either in the manager's "description" text box or in the status bar. If extra window style {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_HELP_AS_TOOLTIPS} is used, then the text will appear as a tooltip.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>By default, text is shown either in the manager's "description" text box or in the status bar. If extra window style {Wx::PG::PG_EX_WINDOW_STYLES::PG_EX_HELP_AS_TOOLTIPS} is used, then the text will appear as a tooltip. 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @param helpString [String] 
     # @return [void]
     def set_property_help_string(id, helpString) end
     
     # Set {Wx::Bitmap} taken from {Wx::BitmapBundle} in front of the value.
-    # Bitmap will be scaled to a size returned by {Wx::PG::PropertyGrid#get_image_size};
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Bitmap will be scaled to a size returned by {Wx::PG::PropertyGrid#get_image_size}; 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @param bmp [Wx::BitmapBundle] 
     # @return [void]
@@ -678,8 +837,15 @@ module Wx::PG
     def set_property_max_length(id, maxLen) end
     
     # Sets text colour of given property.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>
+    # 
     # - If category is tried to set recursively, only its children are affected.
-    # - Property is redrawn with new colour.
+    # - Property is redrawn with new colour. 
+    # 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty]  Property name or pointer.
     # @param colour [Wx::Colour,String,Symbol]  New text colour.
     # @param flags [Integer]  Default is {Wx::PG::PG_GETPROPERTYVALUES_FLAGS::PG_RECURSE} which causes colour to be set recursively. Omit this flag to only set colour for the property in question and not any of its children.
@@ -774,14 +940,22 @@ module Wx::PG
     #   @return [void]
     # @overload set_property_value(id, value)
     #   Sets value ({Wx::Variant}) of a property.
-    #   Use {Wx::PG::PropertyGridInterface#change_property_value} instead if you need to run through validation process and send property change event.
+    #   <div class="wxrb-remark">
+    #   <b>Remark:</b>
+    #   <p>Use {Wx::PG::PropertyGridInterface#change_property_value} instead if you need to run through validation process and send property change event. 
+    #   </p>
+    #   </div>>
     #   @param id [String,Wx::PG::PGProperty] 
     #   @param value [nil,String,Integer,Float,Time,Wx::Font,Wx::Colour,Wx::Variant,Array<WxVariant>,Array<String>,ObjectWx::PG::ColourPropertyValue] 
     #   @return [void]
     def set_property_value(*args) end
     
     # Sets value ({Wx::String}) of a property.
-    # This method uses {Wx::PG::PGProperty#set_value_from_string}, which all properties should implement. This means that there should not be a type error, and instead the string is converted to property's actual value type.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This method uses {Wx::PG::PGProperty#set_value_from_string}, which all properties should implement. This means that there should not be a type error, and instead the string is converted to property's actual value type. 
+    # </p>
+    # </div>>
     # @param id [String,Wx::PG::PGProperty] 
     # @param value [String] 
     # @return [void]
@@ -824,7 +998,11 @@ module Wx::PG
     alias_method :property_by_name_a, :get_property_by_name_a
     
     # 
-    # This function reselects the property and may cause excess flicker, so to just call Refresh() on a rect of single property, call DrawItem() instead.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>This function reselects the property and may cause excess flicker, so to just call Refresh() on a rect of single property, call DrawItem() instead. 
+    # </p>
+    # </div>>
     # @param p [Wx::PG::PGProperty] 
     # @return [void]
     def refresh_property(p) end

data/lib/wx/doc/gen/pg/property_grid_manager.rb

@@ -47,17 +47,17 @@ module Wx::PG
   #   pgMan.show_header
   # ```
   # 
-  # == Window Styles
+  # ## Window Styles
   # 
   # See wxPropertyGrid Window Styles.
   # 
-  # == Event Handling
+  # ## Event Handling
   # 
   # See wxPropertyGrid Event Handling for more information.
-  # === 
   # 
   # Category:  {Wx::PG::PropertyGrid}
   # 
+  # @wxrb_require USE_PROPGRID
   class PropertyGridManager < Panel
   
     include Wx::PG::PropertyGridInterface
@@ -66,7 +66,7 @@ module Wx::PG
     #   Two step constructor.
     #   Call Create when this constructor is called to build up the {Wx::PG::PropertyGridManager}.
     #   @return [Wx::PG::PropertyGridManager]
-    # @overload initialize(parent, id=Wx::StandardID::ID_ANY, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::PG::PGMAN_DEFAULT_STYLE, name=Wx::PropertyGridManagerNameStr)
+    # @overload initialize(parent, id=Wx::StandardID::ID_ANY, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::PG::PGMAN_DEFAULT_STYLE, name=Wx::PROPERTY_GRID_MANAGER_NAME_STR)
     #   The default constructor.
     #   The styles to be used are styles valid for the {Wx::Window}.
     #   @see wxPropertyGrid Window Styles 
@@ -84,7 +84,11 @@ module Wx::PG
     # 
     # Returns pointer to created property grid page.
     # 
-    # If toolbar is used, it is highly recommended that the pages are added when the toolbar is not turned off using window style flag switching. Otherwise toolbar buttons might not be added properly.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If toolbar is used, it is highly recommended that the pages are added when the toolbar is not turned off using window style flag switching. Otherwise toolbar buttons might not be added properly. 
+    # </p>
+    # </div>>
     # @param label [String]  A label for the page. This may be shown as a toolbar tooltip etc.
     # @param bmp [Wx::BitmapBundle,Wx::Bitmap,Wx::Icon,Wx::Image]  Bitmap bundle for toolbar image. If the bundle is empty, then a built-in default bitmap bundle is used.
     # @param pageObj [Wx::PG::PropertyGridPage]  {Wx::PG::PropertyGridPage} instance. Manager will take ownership of this object. NULL indicates that a default page instance should be created.
@@ -116,10 +120,14 @@ module Wx::PG
     # @param style [Integer] 
     # @param name [String] 
     # @return [Boolean]
-    def create(parent, id=Wx::StandardID::ID_ANY, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::PG::PGMAN_DEFAULT_STYLE, name=Wx::PropertyGridManagerNameStr) end
+    def create(parent, id=Wx::StandardID::ID_ANY, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::PG::PGMAN_DEFAULT_STYLE, name=Wx::PROPERTY_GRID_MANAGER_NAME_STR) end
     
     # Enables or disables (shows/hides) categories according to parameter enable.
-    # Calling this may not properly update toolbar buttons.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Calling this may not properly update toolbar buttons. 
+    # </p>
+    # </div>>
     # @param enable [Boolean] 
     # @return [Boolean]
     def enable_categories(enable) end
@@ -275,7 +283,11 @@ module Wx::PG
     def select_property(id, focus=false) end
     
     # Sets number of columns on given page (default is current page).
-    # If you use header, then you should always use this member function to set the column count, instead of ones present in {Wx::PG::PropertyGrid} or {Wx::PG::PropertyGridPage}.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If you use header, then you should always use this member function to set the column count, instead of ones present in {Wx::PG::PropertyGrid} or {Wx::PG::PropertyGridPage}. 
+    # </p>
+    # </div>>
     # @param colCount [Integer] 
     # @param page [Integer] 
     # @return [void]
@@ -284,7 +296,12 @@ module Wx::PG
     
     # Sets a column title.
     # Default title for column 0 is "Property", and "Value" for column 1.
-    # If header is not shown yet, then calling this member function will make it visible.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If header is not shown yet, then calling this member function will make it visible. 
+    # </p>
+    # </div>>
     # @param idx [Integer] 
     # @param title [String] 
     # @return [void]
@@ -318,7 +335,11 @@ module Wx::PG
     alias_method :page_splitter_left=, :set_page_splitter_left
     
     # Sets splitter position on individual page.
-    # If you use header, then you should always use this member function to set the splitter position, instead of ones present in {Wx::PG::PropertyGrid} or {Wx::PG::PropertyGridPage}.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>If you use header, then you should always use this member function to set the splitter position, instead of ones present in {Wx::PG::PropertyGrid} or {Wx::PG::PropertyGridPage}. 
+    # </p>
+    # </div>>
     # @param page [Integer] 
     # @param pos [Integer] 
     # @param column [Integer] 
@@ -326,7 +347,11 @@ module Wx::PG
     def set_page_splitter_position(page, pos, column=0) end
     
     # Sets splitter position for all pages.
-    # Splitter position cannot exceed grid size, and therefore setting it during form creation may fail as initial grid size is often smaller than desired splitter position, especially when sizers are being used.
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Splitter position cannot exceed grid size, and therefore setting it during form creation may fail as initial grid size is often smaller than desired splitter position, especially when sizers are being used.
+    # </p>
+    # </div>>
     # 
     # If you use header, then you should always use this member function to set the splitter position, instead of ones present in {Wx::PG::PropertyGrid} or {Wx::PG::PropertyGridPage}.
     # @param pos [Integer] 
@@ -337,7 +362,12 @@ module Wx::PG
     
     # Show or hide the property grid header control.
     # It is hidden by the default.
-    # Grid may look better if you use {Wx::PG::PG_WINDOW_STYLES::PG_NO_INTERNAL_BORDER} window style when showing a header.
+    # 
+    # <div class="wxrb-remark">
+    # <b>Remark:</b>
+    # <p>Grid may look better if you use {Wx::PG::PG_WINDOW_STYLES::PG_NO_INTERNAL_BORDER} window style when showing a header. 
+    # </p>
+    # </div>>
     # @param show [Boolean] 
     # @return [void]
     def show_header(show=true) end