worker_ruby 0.5.7

data/lib/worker_ruby/models/id_status.rb

@@ -0,0 +1,243 @@
+=begin
+#IronWorker CE API
+
+#The ultimate, language agnostic, container based task processing framework.
+
+OpenAPI spec version: 0.5.7
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+=end
+
+require 'date'
+
+module IronWorker
+
+  class IdStatus
+    # Unique identifier representing a specific task.
+    attr_accessor :id
+
+    # States and valid transitions.                   +---------+        +---------> delayed <----------------+                  +----+----+                |                       |                     |                       |                     |                  +----v----+                |        +---------> queued  <----------------+                  +----+----+                *                       |                     *                       |               retry * creates new task                  +----v----+                *                  | running |                *                  +--+-+-+--+                |           +---------|-|-|-----+-------------+       +---|---------+ | +-----|---------+   |       |   |           |       |         |   | +-----v---^-+      +--v-------^+     +--v---^-+ | success   |      | cancelled |     |  error | +-----------+      +-----------+     +--------+  * delayed - has a delay. * queued - Ready to be consumed when it's turn comes. * running - Currently consumed by a runner which will attempt to process it. * success - (or complete? success/error is common javascript terminology) * error - Something went wrong. In this case more information can be obtained   by inspecting the \"reason\" field.   - timeout   - killed - forcibly killed by worker due to resource restrictions or access     violations.   - bad_exit - exited with non-zero status due to program termination/crash. * cancelled - cancelled via API. More information in the reason field.   - client_request - Request was cancelled by a client. 
+    attr_accessor :status
+
+    class EnumAttributeValidator
+      attr_reader :datatype
+      attr_reader :allowable_values
+
+      def initialize(datatype, allowable_values)
+        @allowable_values = allowable_values.map do |value|
+          case datatype.to_s
+          when /Integer/i
+            value.to_i
+          when /Float/i
+            value.to_f
+          else
+            value
+          end
+        end
+      end
+
+      def valid?(value)
+        !value || allowable_values.include?(value)
+      end
+    end
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'id' => :'id',
+        :'status' => :'status'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'id' => :'String',
+        :'status' => :'String'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}){|(k,v), h| h[k.to_sym] = v}
+
+      if attributes.has_key?(:'id')
+        self.id = attributes[:'id']
+      end
+
+      if attributes.has_key?(:'status')
+        self.status = attributes[:'status']
+      end
+
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properies with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      return invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      status_validator = EnumAttributeValidator.new('String', ["delayed", "queued", "running", "success", "error", "cancelled"])
+      return false unless status_validator.valid?(@status)
+      return true
+    end
+
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] status Object to be assigned
+    def status=(status)
+      validator = EnumAttributeValidator.new('String', ["delayed", "queued", "running", "success", "error", "cancelled"])
+      unless validator.valid?(status)
+        fail ArgumentError, "invalid value for 'status', must be one of #{validator.allowable_values}."
+      end
+      @status = status
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          id == o.id &&
+          status == o.status
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [id, status].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /^Array<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map{ |v| _deserialize($1, v) } )
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /^(true|t|yes|y|1)$/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = IronWorker.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map{ |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/worker_ruby/models/new_task.rb

@@ -0,0 +1,270 @@
+=begin
+#IronWorker CE API
+
+#The ultimate, language agnostic, container based task processing framework.
+
+OpenAPI spec version: 0.5.7
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+=end
+
+require 'date'
+
+module IronWorker
+
+  class NewTask
+    # Name of Docker image to use. This is optional and can be used to override the image defined at the group level.
+    attr_accessor :image
+
+    # Payload for the task. This is what you pass into each task to make it do something.
+    attr_accessor :payload
+
+    # Number of seconds to wait before queueing the task for consumption for the first time. Must be a positive integer. Tasks with a delay start in state \"delayed\" and transition to \"running\" after delay seconds.
+    attr_accessor :delay
+
+    # Maximum runtime in seconds. If a consumer retrieves the task, but does not change it's status within timeout seconds, the task is considered failed, with reason timeout (Titan may allow a small grace period). The consumer should also kill the task after timeout seconds. If a consumer tries to change status after Titan has already timed out the task, the consumer will be ignored. 
+    attr_accessor :timeout
+
+    # Priority of the task. Higher has more priority. 3 levels from 0-2. Tasks at same priority are processed in FIFO order.
+    attr_accessor :priority
+
+    # \"Number of automatic retries this task is allowed.  A retry will be attempted if a task fails. Max 25. Automatic retries are performed by titan when a task reaches a failed state and has `max_retries` > 0. A retry is performed by queueing a new task with the same image id and payload. The new task's max_retries is one less than the original. The new task's `retry_of` field is set to the original Task ID. The old task's `retry_at` field is set to the new Task's ID.  Titan will delay the new task for retries_delay seconds before queueing it. Cancelled or successful tasks are never automatically retried.\" 
+    attr_accessor :max_retries
+
+    # Time in seconds to wait before retrying the task. Must be a non-negative integer.
+    attr_accessor :retries_delay
+
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'image' => :'image',
+        :'payload' => :'payload',
+        :'delay' => :'delay',
+        :'timeout' => :'timeout',
+        :'priority' => :'priority',
+        :'max_retries' => :'max_retries',
+        :'retries_delay' => :'retries_delay'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'image' => :'String',
+        :'payload' => :'String',
+        :'delay' => :'Integer',
+        :'timeout' => :'Integer',
+        :'priority' => :'Integer',
+        :'max_retries' => :'Integer',
+        :'retries_delay' => :'Integer'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}){|(k,v), h| h[k.to_sym] = v}
+
+      if attributes.has_key?(:'image')
+        self.image = attributes[:'image']
+      end
+
+      if attributes.has_key?(:'payload')
+        self.payload = attributes[:'payload']
+      end
+
+      if attributes.has_key?(:'delay')
+        self.delay = attributes[:'delay']
+      else
+        self.delay = 0
+      end
+
+      if attributes.has_key?(:'timeout')
+        self.timeout = attributes[:'timeout']
+      else
+        self.timeout = 60
+      end
+
+      if attributes.has_key?(:'priority')
+        self.priority = attributes[:'priority']
+      end
+
+      if attributes.has_key?(:'max_retries')
+        self.max_retries = attributes[:'max_retries']
+      else
+        self.max_retries = 0
+      end
+
+      if attributes.has_key?(:'retries_delay')
+        self.retries_delay = attributes[:'retries_delay']
+      else
+        self.retries_delay = 60
+      end
+
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properies with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      return invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @image.nil?
+      return false if @priority.nil?
+      return true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          image == o.image &&
+          payload == o.payload &&
+          delay == o.delay &&
+          timeout == o.timeout &&
+          priority == o.priority &&
+          max_retries == o.max_retries &&
+          retries_delay == o.retries_delay
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [image, payload, delay, timeout, priority, max_retries, retries_delay].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /^Array<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map{ |v| _deserialize($1, v) } )
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /^(true|t|yes|y|1)$/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = IronWorker.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map{ |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end