wombat-cli 0.6.1 → 0.6.2

data/lib/wombat/output.rb

@@ -1,101 +1,101 @@
-require 'wombat/common'
-require 'aws-sdk'
-require 'azure_mgmt_network'
-
-module Wombat
-  class OutputRunner
-    include Wombat::Common
-
-    attr_reader :stack, :cloud
-    attr_accessor :network_management_client
-
-    def initialize(opts)
-      @stack = opts.stack
-      @cloud = opts.cloud.nil? ? "aws" : opts.cloud
-    end
-
-    def start
-
-      # Get the IP addresses for the workstations
-      case cloud
-      when "aws"
-        cfn_workstation_ips(stack)
-      when "azure"
-        azure_workstation_ips(stack)
-      end
-    end
-
-    private
-
-    def cfn_workstation_ips(stack)
-      ec2 = ::Aws::EC2::Resource.new
-      instances = cfn_stack_instances(stack)
-      instances.each do |name, id|
-        instance = ec2.instance(id)
-        if /Workstation/.match(name)
-          puts "#{name} (#{id}) => #{instance.public_ip_address}"
-        end
-      end
-    end
-
-    def cfn_stack_instances(stack)
-      cfn = ::Aws::CloudFormation::Client.new
-      resp = cfn.describe_stack_resources({
-        stack_name: stack
-        })
-
-      instances = {}
-      resp.stack_resources.map do |resource|
-        if resource.resource_type == 'AWS::EC2::Instance'
-          instances[resource.logical_resource_id] = resource.physical_resource_id
-        end
-      end
-      instances
-    end
-
-    def azure_workstation_ips(stack)
-
-      # Connect to Azure
-      azure_conn = connect_azure()
-
-      # Create a resource client so that the resource groups can be interrogated
-      resource_management_client = Azure::ARM::Resources::ResourceManagementClient.new(azure_conn)
-      resource_management_client.subscription_id = ENV['AZURE_SUBSCRIPTION_ID']
-
-      # Create a resource client so that the template can be deployed
-      @network_management_client = Azure::ARM::Network::NetworkManagementClient.new(azure_conn)
-      network_management_client.subscription_id = ENV['AZURE_SUBSCRIPTION_ID']
-      
-      # Return a list of all the resource groups that begin with the stack name
-      resource_groups = resource_management_client.resource_groups.list()
-
-      # filter the resource groups looking for thos that start with the stack name
-      filtered_groups = resource_groups.select { |n| n.name.start_with?(stack) }
-
-      # iterate around the filtered resource groups idenfitying the public_ipaddresses in the group
-      filtered_groups.each do |group|
-
-        # Obtain a list of all the Public IP addresses in the stack
-        public_ip_addresses = network_management_client.public_ipaddresses.list(group.name)
-
-        banner(format("Public IP Addresses in '%s'", group.name))
-
-        # Check that there are IP addresses in the stack
-        if public_ip_addresses.length == 0
-
-          warn('No public IP addresses')
-
-        else
-
-          # Iterate around the public IP addresses and output each one
-          public_ip_addresses.each do |public_ip_address|
-
-            # Output the details about the IP address
-            puts format("%s:\t%s (%s)", public_ip_address.name, public_ip_address.ip_address, public_ip_address.dns_settings.fqdn)
-          end
-        end
-
-      end
-    end
-  end
-end
+require 'wombat/common'
+require 'aws-sdk'
+require 'azure_mgmt_network'
+
+module Wombat
+  class OutputRunner
+    include Wombat::Common
+
+    attr_reader :stack, :cloud
+    attr_accessor :network_management_client
+
+    def initialize(opts)
+      @stack = opts.stack
+      @cloud = opts.cloud.nil? ? "aws" : opts.cloud
+    end
+
+    def start
+
+      # Get the IP addresses for the workstations
+      case cloud
+      when "aws"
+        cfn_workstation_ips(stack)
+      when "azure"
+        azure_workstation_ips(stack)
+      end
+    end
+
+    private
+
+    def cfn_workstation_ips(stack)
+      ec2 = ::Aws::EC2::Resource.new
+      instances = cfn_stack_instances(stack)
+      instances.each do |name, id|
+        instance = ec2.instance(id)
+        if /Workstation/.match(name)
+          puts "#{name} (#{id}) => #{instance.public_ip_address}"
+        end
+      end
+    end
+
+    def cfn_stack_instances(stack)
+      cfn = ::Aws::CloudFormation::Client.new
+      resp = cfn.describe_stack_resources({
+        stack_name: stack
+        })
+
+      instances = {}
+      resp.stack_resources.map do |resource|
+        if resource.resource_type == 'AWS::EC2::Instance'
+          instances[resource.logical_resource_id] = resource.physical_resource_id
+        end
+      end
+      instances
+    end
+
+    def azure_workstation_ips(stack)
+
+      # Connect to Azure
+      azure_conn = connect_azure()
+
+      # Create a resource client so that the resource groups can be interrogated
+      resource_management_client = Azure::ARM::Resources::ResourceManagementClient.new(azure_conn)
+      resource_management_client.subscription_id = ENV['AZURE_SUBSCRIPTION_ID']
+
+      # Create a resource client so that the template can be deployed
+      @network_management_client = Azure::ARM::Network::NetworkManagementClient.new(azure_conn)
+      network_management_client.subscription_id = ENV['AZURE_SUBSCRIPTION_ID']
+      
+      # Return a list of all the resource groups that begin with the stack name
+      resource_groups = resource_management_client.resource_groups.list()
+
+      # filter the resource groups looking for thos that start with the stack name
+      filtered_groups = resource_groups.select { |n| n.name.start_with?(stack) }
+
+      # iterate around the filtered resource groups idenfitying the public_ipaddresses in the group
+      filtered_groups.each do |group|
+
+        # Obtain a list of all the Public IP addresses in the stack
+        public_ip_addresses = network_management_client.public_ipaddresses.list(group.name)
+
+        banner(format("Public IP Addresses in '%s'", group.name))
+
+        # Check that there are IP addresses in the stack
+        if public_ip_addresses.length == 0
+
+          warn('No public IP addresses')
+
+        else
+
+          # Iterate around the public IP addresses and output each one
+          public_ip_addresses.each do |public_ip_address|
+
+            # Output the details about the IP address
+            puts format("%s:\t%s (%s)", public_ip_address.name, public_ip_address.ip_address, public_ip_address.dns_settings.fqdn)
+          end
+        end
+
+      end
+    end
+  end
+end

data/lib/wombat/update.rb

@@ -1,20 +1,20 @@
-require 'wombat/common'
-
-module Wombat
-  class UpdateRunner
-    include Wombat::Common
-
-    attr_reader :cloud, :update_file
-
-    def initialize(opts)
-      @cloud = opts.cloud.nil? ? "aws" : opts.cloud
-      @update_file = opts.file.nil? ? "all" : opts.file
-      @wombat_yml = opts.wombat_yml
-    end
-
-    def start
-      update_lock(cloud) if /(all|lock)/.match(update_file)
-      update_template(cloud) if /(all|template)/.match(update_file)
-    end
-  end
-end
+require 'wombat/common'
+
+module Wombat
+  class UpdateRunner
+    include Wombat::Common
+
+    attr_reader :cloud, :update_file
+
+    def initialize(opts)
+      @cloud = opts.cloud.nil? ? "aws" : opts.cloud
+      @update_file = opts.file.nil? ? "all" : opts.file
+      @wombat_yml = opts.wombat_yml
+    end
+
+    def start
+      update_lock(cloud) if /(all|lock)/.match(update_file)
+      update_template(cloud) if /(all|template)/.match(update_file)
+    end
+  end
+end

data/lib/wombat/version.rb

@@ -1,3 +1,3 @@
-module Wombat
-  VERSION = "0.6.1"
-end
+module Wombat
+  VERSION = "0.6.2"
+end

data/lib/wombat.rb

@@ -1,8 +1,8 @@
-
-require 'wombat/common'
-require 'wombat/cli'
-require 'wombat/delete'
-require 'wombat/build'
-require 'wombat/deploy'
-require 'wombat/output'
-require 'wombat/version'
+
+require 'wombat/common'
+require 'wombat/cli'
+require 'wombat/delete'
+require 'wombat/build'
+require 'wombat/deploy'
+require 'wombat/output'
+require 'wombat/version'

data/spec/functional/common_spec.rb

@@ -1,26 +1,26 @@
-require "wombat/common"
-require "yaml"
-
-describe "Common" do
-  let(:common) do
-    klass = Class.new { include Wombat::Common }
-
-    return klass.new
-  end
-
-  describe "#wombat" do
-    it "reads a configuration file" do
-      wombat_yml = File.join(
-        File.expand_path("../..", File.dirname(__FILE__)),
-        "generator_files",
-        "wombat.yml"
-      )
-
-      stub_const("ENV", {"WOMBAT_YML" => wombat_yml})
-
-      content = common.wombat
-
-      expect(content["name"]).to eq("wombat")
-    end
-  end
-end
+require "wombat/common"
+require "yaml"
+
+describe "Common" do
+  let(:common) do
+    klass = Class.new { include Wombat::Common }
+
+    return klass.new
+  end
+
+  describe "#wombat" do
+    it "reads a configuration file" do
+      wombat_yml = File.join(
+        File.expand_path("../..", File.dirname(__FILE__)),
+        "generator_files",
+        "wombat.yml"
+      )
+
+      stub_const("ENV", {"WOMBAT_YML" => wombat_yml})
+
+      content = common.wombat
+
+      expect(content["name"]).to eq("wombat")
+    end
+  end
+end

data/spec/spec_helper.rb

@@ -1,103 +1,103 @@
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# The `.rspec` file also contains a few flags that are not defaults but that
-# users commonly want.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
-RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
-  config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
-    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
-  end
-
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
-  config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
-    mocks.verify_partial_doubles = true
-  end
-
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
-  config.shared_context_metadata_behavior = :apply_to_host_groups
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # This allows you to limit a spec run to individual examples or groups
-  # you care about by tagging them with `:focus` metadata. When nothing
-  # is tagged with `:focus`, all examples get run. RSpec also provides
-  # aliases for `it`, `describe`, and `context` that include `:focus`
-  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  config.filter_run_when_matching :focus
-
-  # Allows RSpec to persist some state between runs in order to support
-  # the `--only-failures` and `--next-failure` CLI options. We recommend
-  # you configure your source control system to ignore this file.
-  config.example_status_persistence_file_path = "spec/examples.txt"
-
-  # Limits the available syntax to the non-monkey patched syntax that is
-  # recommended. For more details, see:
-  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  config.disable_monkey_patching!
-
-  # This setting enables warnings. It's recommended, but in some cases may
-  # be too noisy due to issues in dependencies.
-  config.warnings = true
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = 'doc'
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
-end
+# This file was generated by the `rspec --init` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause
+# this file to always be loaded, without a need to explicitly require it in any
+# files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need
+# it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # This option will default to `true` in RSpec 4. It makes the `description`
+    # and `failure_message` of custom matchers include text for helper methods
+    # defined using `chain`, e.g.:
+    #     be_bigger_than(2).and_smaller_than(4).description
+    #     # => "be bigger than 2 and smaller than 4"
+    # ...rather than:
+    #     # => "be bigger than 2"
+    expectations.include_chain_clauses_in_custom_matcher_descriptions = true
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended, and will default to
+    # `true` in RSpec 4.
+    mocks.verify_partial_doubles = true
+  end
+
+  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
+  # have no way to turn it off -- the option exists only for backwards
+  # compatibility in RSpec 3). It causes shared context metadata to be
+  # inherited by the metadata hash of host groups and examples, rather than
+  # triggering implicit auto-inclusion in groups with matching metadata.
+  config.shared_context_metadata_behavior = :apply_to_host_groups
+
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # This allows you to limit a spec run to individual examples or groups
+  # you care about by tagging them with `:focus` metadata. When nothing
+  # is tagged with `:focus`, all examples get run. RSpec also provides
+  # aliases for `it`, `describe`, and `context` that include `:focus`
+  # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
+  config.filter_run_when_matching :focus
+
+  # Allows RSpec to persist some state between runs in order to support
+  # the `--only-failures` and `--next-failure` CLI options. We recommend
+  # you configure your source control system to ignore this file.
+  config.example_status_persistence_file_path = "spec/examples.txt"
+
+  # Limits the available syntax to the non-monkey patched syntax that is
+  # recommended. For more details, see:
+  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
+  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
+  config.disable_monkey_patching!
+
+  # This setting enables warnings. It's recommended, but in some cases may
+  # be too noisy due to issues in dependencies.
+  config.warnings = true
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+=end
+end