wibrfake-brk 0.0.2

data/config/initializers/devise.rb

@@ -0,0 +1,313 @@
+# frozen_string_literal: true
+
+# Assuming you have not yet modified this file, each configuration option below
+# is set to its default value. Note that some are commented out while others
+# are not: uncommented lines are intended to protect your configuration from
+# breaking changes in upgrades (i.e., in the event that future versions of
+# Devise change the default values for those options).
+#
+# Use this hook to configure devise mailer, warden hooks and so forth.
+# Many of these configuration options can be set straight in your model.
+Devise.setup do |config|
+  # The secret key used by Devise. Devise uses this key to generate
+  # random tokens. Changing this key will render invalid all existing
+  # confirmation, reset password and unlock tokens in the database.
+  # Devise will use the `secret_key_base` as its `secret_key`
+  # by default. You can change it below and use your own secret key.
+  # config.secret_key = '141dba83cda9779dbfa28bf1dd3b18646b4e45365e867d0a42f1ed262c8160e5aec7c0c4513f751531eea85b44114a81232a8a705d4aa9a11fb8dc0f1c8d9122'
+
+  # ==> Controller configuration
+  # Configure the parent class to the devise controllers.
+  # config.parent_controller = 'DeviseController'
+
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in Devise::Mailer,
+  # note that it will be overwritten if you use your own mailer class
+  # with default "from" parameter.
+  config.mailer_sender = 'breakingtws@gmail.com'
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = 'Devise::Mailer'
+
+  # Configure the parent class responsible to send e-mails.
+  # config.parent_mailer = 'ActionMailer::Base'
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating a user. The default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating a user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  # You can also supply a hash where the value is a boolean determining whether
+  # or not authentication should be aborted when the value is not present.
+  # config.authentication_keys = [:email]
+
+  # Configure parameters from the request object used for authentication. Each entry
+  # given should be a request method and it will automatically be passed to the
+  # find_for_authentication method and considered in your model lookup. For instance,
+  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
+  # The same considerations mentioned for authentication_keys also apply to request_keys.
+  # config.request_keys = []
+
+  # Configure which authentication keys should be case-insensitive.
+  # These keys will be downcased upon creating or modifying a user and when used
+  # to authenticate or find a user. Default is :email.
+  config.case_insensitive_keys = [:email]
+
+  # Configure which authentication keys should have whitespace stripped.
+  # These keys will have whitespace before and after removed upon creating or
+  # modifying a user and when used to authenticate or find a user. Default is :email.
+  config.strip_whitespace_keys = [:email]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # It can be set to an array that will enable params authentication only for the
+  # given strategies, for example, `config.params_authenticatable = [:database]` will
+  # enable it only for database (email + password) authentication.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Auth is enabled. False by default.
+  # It can be set to an array that will enable http authentication only for the
+  # given strategies, for example, `config.http_authenticatable = [:database]` will
+  # enable it only for database authentication.
+  # For API-only applications to support authentication "out-of-the-box", you will likely want to
+  # enable this with :database unless you are using a custom strategy.
+  # The supported strategies are:
+  # :database      = Support basic authentication with authentication key + password
+  # config.http_authenticatable = false
+
+  # If 401 status code should be returned for AJAX requests. True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication. 'Application' by default.
+  # config.http_authentication_realm = 'Application'
+
+  # It will change confirmation, password recovery and other workflows
+  # to behave the same regardless if the e-mail provided was right or wrong.
+  # Does not affect registerable.
+  # config.paranoid = true
+
+  # By default Devise will store the user in session. You can skip storage for
+  # particular strategies by setting this option.
+  # Notice that if you are skipping storage for all authentication paths, you
+  # may want to disable generating routes to Devise's sessions controller by
+  # passing skip: :sessions to `devise_for` in your config/routes.rb
+  config.skip_session_storage = [:http_auth]
+
+  # By default, Devise cleans up the CSRF token on authentication to
+  # avoid CSRF token fixation attacks. This means that, when using AJAX
+  # requests for sign in and sign up, you need to get a new CSRF token
+  # from the server. You can disable this option at your own risk.
+  # config.clean_up_csrf_token_on_authentication = true
+
+  # When false, Devise will not attempt to reload routes on eager load.
+  # This can reduce the time taken to boot the app but if your application
+  # requires the Devise mappings to be loaded during boot time the application
+  # won't boot properly.
+  # config.reload_routes = true
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 12. If
+  # using other algorithms, it sets how many times you want the password to be hashed.
+  # The number of stretches used for generating the hashed password are stored
+  # with the hashed password. This allows you to change the stretches without
+  # invalidating existing passwords.
+  #
+  # Limiting the stretches to just one in testing will increase the performance of
+  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
+  # a value less than 10 in other environments. Note that, for bcrypt (the default
+  # algorithm), the cost increases exponentially with the number of stretches (e.g.
+  # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation).
+  config.stretches = Rails.env.test? ? 1 : 12
+
+  # Set up a pepper to generate the hashed password.
+  # config.pepper = '70cb7a4c1f11248ea3b0eeb67a8552b571e6bf7fd84664cf7af6512551c9fc76382e9aa8e401a5b2251ac6291febeab0f658d4d760e478b8ce524ca2a8f79004'
+
+  # Send a notification to the original email when the user's email is changed.
+  # config.send_email_changed_notification = false
+
+  # Send a notification email when the user's password is changed.
+  # config.send_password_change_notification = false
+
+  # ==> Configuration for :confirmable
+  # A period that the user is allowed to access the website even without
+  # confirming their account. For instance, if set to 2.days, the user will be
+  # able to access the website for two days without confirming their account,
+  # access will be blocked just in the third day.
+  # You can also set it to nil, which will allow the user to access the website
+  # without confirming their account.
+  # Default is 0.days, meaning the user cannot access the website without
+  # confirming their account.
+  # config.allow_unconfirmed_access_for = 2.days
+
+  # A period that the user is allowed to confirm their account before their
+  # token becomes invalid. For example, if set to 3.days, the user can confirm
+  # their account within 3 days after the mail was sent, but on the fourth day
+  # their account can't be confirmed with the token any more.
+  # Default is nil, meaning there is no restriction on how long a user can take
+  # before confirming their account.
+  # config.confirm_within = 3.days
+
+  # If true, requires any email changes to be confirmed (exactly the same way as
+  # initial account confirmation) to be applied. Requires additional unconfirmed_email
+  # db field (see migrations). Until confirmed, new email is stored in
+  # unconfirmed_email column, and copied to email column on successful confirmation.
+  config.reconfirmable = true
+
+  # Defines which key will be used when confirming an account
+  # config.confirmation_keys = [:email]
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # Invalidates all the remember me tokens when the user signs out.
+  config.expire_all_remember_me_on_sign_out = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # Options to be passed to the created cookie. For instance, you can set
+  # secure: true in order to force SSL only cookies.
+  # config.rememberable_options = {}
+
+  # ==> Configuration for :validatable
+  # Range for password length.
+  config.password_length = 6..128
+
+  # Email regex used to validate email formats. It simply asserts that
+  # one (and only one) @ exists in the given string. This is mainly
+  # to give user feedback and not to assert the e-mail validity.
+  config.email_regexp = /\A[^@\s]+@[^@\s]+\z/
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again. Default is 30 minutes.
+  # config.timeout_in = 30.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which key will be used when locking and unlocking an account
+  # config.unlock_keys = [:email]
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # Warn on the last attempt before the account is locked.
+  # config.last_attempt_warning = true
+
+  # ==> Configuration for :recoverable
+  #
+  # Defines which key will be used when recovering the password for an account
+  # config.reset_password_keys = [:email]
+
+  # Time interval you can reset your password with a reset password key.
+  # Don't put a too small interval or your users won't have the time to
+  # change their passwords.
+  config.reset_password_within = 6.hours
+
+  # When set to false, does not sign a user in automatically after their password is
+  # reset. Defaults to true, so a user is signed in automatically after a reset.
+  # config.sign_in_after_reset_password = true
+
+  # ==> Configuration for :encryptable
+  # Allow you to use another hashing or encryption algorithm besides bcrypt (default).
+  # You can use :sha1, :sha512 or algorithms from others authentication tools as
+  # :clearance_sha1, :authlogic_sha512 (then you should set stretches above to 20
+  # for default behavior) and :restful_authentication_sha1 (then you should set
+  # stretches to 10, and copy REST_AUTH_SITE_KEY to pepper).
+  #
+  # Require the `devise-encryptable` gem when using anything other than bcrypt
+  # config.encryptor = :sha512
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = false
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes (usually :user).
+  # config.default_scope = :user
+
+  # Set this configuration to false if you want /users/sign_out to sign out
+  # only the current scope. By default, Devise signs out all scopes.
+  # config.sign_out_all_scopes = true
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  #
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists.
+  #
+  # The "*/*" below is required to match Internet Explorer requests.
+  # config.navigational_formats = ['*/*', :html, :turbo_stream]
+
+  # The default HTTP method used to sign out a resource. Default is :delete.
+  config.sign_out_via = :delete
+
+  # ==> OmniAuth
+  # Add a new OmniAuth provider. Check the wiki for more information on setting
+  # up on your models and hooks.
+  # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo'
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not supported by Devise, or
+  # change the failure app, you can configure them inside the config.warden block.
+  #
+  # config.warden do |manager|
+  #   manager.intercept_401 = false
+  #   manager.default_strategies(scope: :user).unshift :some_external_strategy
+  # end
+
+  # ==> Mountable engine configurations
+  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
+  # is mountable, there are some extra configurations to be taken into account.
+  # The following options are available, assuming the engine is mounted as:
+  #
+  #     mount MyEngine, at: '/my_engine'
+  #
+  # The router that invoked `devise_for`, in the example above, would be:
+  # config.router_name = :my_engine
+  #
+  # When using OmniAuth, Devise cannot automatically set OmniAuth path,
+  # so you need to do it manually. For the users scope, it would be:
+  # config.omniauth_path_prefix = '/my_engine/users/auth'
+
+  # ==> Hotwire/Turbo configuration
+  # When using Devise with Hotwire/Turbo, the http status for error responses
+  # and some redirects must match the following. The default in Devise for existing
+  # apps is `200 OK` and `302 Found` respectively, but new apps are generated with
+  # these new defaults that match Hotwire/Turbo behavior.
+  # Note: These might become the new default in future versions of Devise.
+  config.responder.error_status = :unprocessable_entity
+  config.responder.redirect_status = :see_other
+
+  # ==> Configuration for :registerable
+
+  # When set to false, does not sign a user in automatically after their password is
+  # changed. Defaults to true, so a user is signed in automatically after changing a password.
+  # config.sign_in_after_change_password = true
+end

data/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file.
+# Use this to limit dissemination of sensitive information.
+# See the ActiveSupport::ParameterFilter documentation for supported notations and behaviors.
+Rails.application.config.filter_parameters += [
+  :passw, :email, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn
+]

data/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, "\\1en"
+#   inflect.singular /^(ox)en/i, "\\1"
+#   inflect.irregular "person", "people"
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym "RESTful"
+# end

data/config/initializers/permissions_policy.rb

@@ -0,0 +1,13 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide HTTP permissions policy. For further
+# information see: https://developers.google.com/web/updates/2018/06/feature-policy
+
+# Rails.application.config.permissions_policy do |policy|
+#   policy.camera      :none
+#   policy.gyroscope   :none
+#   policy.microphone  :none
+#   policy.usb         :none
+#   policy.fullscreen  :self
+#   policy.payment     :self, "https://secure.example.com"
+# end

data/config/locales/devise.en.yml

@@ -0,0 +1,65 @@
+# Additional translations at https://github.com/heartcombo/devise/wiki/I18n
+
+en:
+  devise:
+    confirmations:
+      confirmed: "Your email address has been successfully confirmed."
+      send_instructions: "You will receive an email with instructions for how to confirm your email address in a few minutes."
+      send_paranoid_instructions: "If your email address exists in our database, you will receive an email with instructions for how to confirm your email address in a few minutes."
+    failure:
+      already_authenticated: "You are already signed in."
+      inactive: "Your account is not activated yet."
+      invalid: "Invalid %{authentication_keys} or password."
+      locked: "Your account is locked."
+      last_attempt: "You have one more attempt before your account is locked."
+      not_found_in_database: "Invalid %{authentication_keys} or password."
+      timeout: "Your session expired. Please sign in again to continue."
+      unauthenticated: "You need to sign in or sign up before continuing."
+      unconfirmed: "You have to confirm your email address before continuing."
+    mailer:
+      confirmation_instructions:
+        subject: "Confirmation instructions"
+      reset_password_instructions:
+        subject: "Reset password instructions"
+      unlock_instructions:
+        subject: "Unlock instructions"
+      email_changed:
+        subject: "Email Changed"
+      password_change:
+        subject: "Password Changed"
+    omniauth_callbacks:
+      failure: "Could not authenticate you from %{kind} because \"%{reason}\"."
+      success: "Successfully authenticated from %{kind} account."
+    passwords:
+      no_token: "You can't access this page without coming from a password reset email. If you do come from a password reset email, please make sure you used the full URL provided."
+      send_instructions: "You will receive an email with instructions on how to reset your password in a few minutes."
+      send_paranoid_instructions: "If your email address exists in our database, you will receive a password recovery link at your email address in a few minutes."
+      updated: "Your password has been changed successfully. You are now signed in."
+      updated_not_active: "Your password has been changed successfully."
+    registrations:
+      destroyed: "Bye! Your account has been successfully cancelled. We hope to see you again soon."
+      signed_up: "Welcome! You have signed up successfully."
+      signed_up_but_inactive: "You have signed up successfully. However, we could not sign you in because your account is not yet activated."
+      signed_up_but_locked: "You have signed up successfully. However, we could not sign you in because your account is locked."
+      signed_up_but_unconfirmed: "A message with a confirmation link has been sent to your email address. Please follow the link to activate your account."
+      update_needs_confirmation: "You updated your account successfully, but we need to verify your new email address. Please check your email and follow the confirmation link to confirm your new email address."
+      updated: "Your account has been updated successfully."
+      updated_but_not_signed_in: "Your account has been updated successfully, but since your password was changed, you need to sign in again."
+    sessions:
+      signed_in: "Signed in successfully."
+      signed_out: "Signed out successfully."
+      already_signed_out: "Signed out successfully."
+    unlocks:
+      send_instructions: "You will receive an email with instructions for how to unlock your account in a few minutes."
+      send_paranoid_instructions: "If your account exists, you will receive an email with instructions for how to unlock it in a few minutes."
+      unlocked: "Your account has been unlocked successfully. Please sign in to continue."
+  errors:
+    messages:
+      already_confirmed: "was already confirmed, please try signing in"
+      confirmation_period_expired: "needs to be confirmed within %{period}, please request a new one"
+      expired: "has expired, please request a new one"
+      not_found: "not found"
+      not_locked: "was not locked"
+      not_saved:
+        one: "1 error prohibited this %{resource} from being saved:"
+        other: "%{count} errors prohibited this %{resource} from being saved:"

data/config/locales/en.yml

@@ -0,0 +1,31 @@
+# Files in the config/locales directory are used for internationalization and
+# are automatically loaded by Rails. If you want to use locales other than
+# English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t "hello"
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t("hello") %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more about the API, please read the Rails Internationalization guide
+# at https://guides.rubyonrails.org/i18n.html.
+#
+# Be aware that YAML interprets the following case-insensitive strings as
+# booleans: `true`, `false`, `on`, `off`, `yes`, `no`. Therefore, these strings
+# must be quoted to be interpreted as strings. For example:
+#
+#     en:
+#       "yes": yup
+#       enabled: "ON"
+
+en:
+  hello: "Hello world"

data/config/puma.rb

@@ -0,0 +1,35 @@
+# This configuration file will be evaluated by Puma. The top-level methods that
+# are invoked here are part of Puma's configuration DSL. For more information
+# about methods provided by the DSL, see https://puma.io/puma/Puma/DSL.html.
+
+# Puma starts a configurable number of processes (workers) and each process
+# serves each request in a thread from an internal thread pool.
+#
+# The ideal number of threads per worker depends both on how much time the
+# application spends waiting for IO operations and on how much you wish to
+# to prioritize throughput over latency.
+#
+# As a rule of thumb, increasing the number of threads will increase how much
+# traffic a given process can handle (throughput), but due to CRuby's
+# Global VM Lock (GVL) it has diminishing returns and will degrade the
+# response time (latency) of the application.
+#
+# The default is set to 3 threads as it's deemed a decent compromise between
+# throughput and latency for the average Rails application.
+#
+# Any libraries that use a connection pool or another resource pool should
+# be configured to provide at least as many connections as the number of
+# threads. This includes Active Record's `pool` parameter in `database.yml`.
+threads_count = ENV.fetch("RAILS_MAX_THREADS", 3)
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+port ENV.fetch("PORT", 3000)
+
+# Allow puma to be restarted by `bin/rails restart` command.
+plugin :tmp_restart
+
+# Specify the PID file. Defaults to tmp/pids/server.pid in development.
+# In other environments, only set the PID file if requested.
+pidfile ENV["PIDFILE"] if ENV["PIDFILE"]
+

data/config/routes.rb

@@ -0,0 +1,12 @@
+Rails.application.routes.draw do
+  # Respuesta 204 para detección de portal cautivo
+  get 'about/', to: 'sessions#wibrfake_about'
+  get 'nauta/', to: 'sessions#nauta', as: :nauta_login
+  post 'nauta/', to: 'sessions#nauta_login', as: :nauta_login_post
+  #post 'generate_204/', to: 'sessions#nauta_login', as: :nauta_login_post
+  # Redirigir todo el tráfico HTTP al portal de login
+  #get '*path', to: 'sessions#nauta_login', constraints: ->(req) { !req.path.start_with?('/assets') }
+  
+  # Ruta principal
+  root 'sessions#wibrfake'
+end

data/config/storage.yml

@@ -0,0 +1,34 @@
+test:
+  service: Disk
+  root: <%= Rails.root.join("tmp/storage") %>
+
+local:
+  service: Disk
+  root: <%= Rails.root.join("storage") %>
+
+# Use bin/rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
+# amazon:
+#   service: S3
+#   access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
+#   secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
+#   region: us-east-1
+#   bucket: your_own_bucket-<%= Rails.env %>
+
+# Remember not to checkin your GCS keyfile to a repository
+# google:
+#   service: GCS
+#   project: your_project
+#   credentials: <%= Rails.root.join("path/to/gcs.keyfile") %>
+#   bucket: your_own_bucket-<%= Rails.env %>
+
+# Use bin/rails credentials:edit to set the Azure Storage secret (as azure_storage:storage_access_key)
+# microsoft:
+#   service: AzureStorage
+#   storage_account_name: your_account_name
+#   storage_access_key: <%= Rails.application.credentials.dig(:azure_storage, :storage_access_key) %>
+#   container: your_container_name-<%= Rails.env %>
+
+# mirror:
+#   service: Mirror
+#   primary: local
+#   mirrors: [ amazon, google, microsoft ]

data/config.ru

@@ -0,0 +1,6 @@
+# This file is used by Rack-based servers to start the application.
+
+require_relative "config/environment"
+
+run Rails.application
+Rails.application.load_server

data/db/schema.rb

@@ -0,0 +1,14 @@
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# This file is the source Rails uses to define your schema when running `bin/rails
+# db:schema:load`. When creating a new database, `bin/rails db:schema:load` tends to
+# be faster and is potentially less error prone than running all of your
+# migrations from scratch. Old migrations may fail to apply correctly if those
+# migrations use external dependencies or application code.
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema[7.2].define(version: 0) do
+end

data/ext/wibrfake/extconf.rb

@@ -0,0 +1,3 @@
+puts "Ejecutando scripts post-instalación..."
+
+puts "🛠  Configurando WibrFake..."

data/lib/wibrfake/Config/ipaddr.rb

@@ -0,0 +1,71 @@
+require 'ipaddr'
+require 'socket'
+require_relative '../Process/processes'
+module WibrFake
+    class IPAddr < IPAddr
+        def initialize(ip = "172.168.1.1", mask = "255.255.255.0")
+            super(ip)
+            @mask = mask
+        end
+
+        def inspect
+            "#<WibrFake IPAddr: #{self.ipv4? ? 'IPv4' : 'IPv6'}:#{self.to_s}/#{@mask}>"
+        end
+
+        def mask
+            @mask
+        end
+
+        def defined_mask(mask)
+            if mask =~ /\b(?:\d{1,3}\.){3}\d{1,3}\b/
+                @mask = mask
+            else
+                puts "Formato de mask erroneo"
+            end
+        end
+        def succ(new_octet)
+            parts = self.to_s.split('.')
+            if parts.length == 4 && new_octet.to_i.between?(0, 255)
+              parts[-1] = new_octet.to_s
+              modified_ip = parts.join('.')
+              return modified_ip
+            else
+              puts "Dirección IP o nuevo octeto no válidos."
+              return nil
+            end
+        end
+        def ip_range()
+            range = []
+            ip = self.to_s.strip.split('.')[0..2].join('.')
+            ip_first = self.to_s.strip.split('.')[3].to_i
+            ip_last = 254
+            (ip_first..ip_last).each {|num|range<< "#{ip}.#{num}"}
+            return range
+        end 
+        def mask_number()
+            mask = self.to_i.to_s(2).count("1").to_s
+        end
+        def vac()
+            vacio = self.to_s.strip.split('.')[0..2].join('.')
+            vacio + "."
+        end
+        def self.range(ip_init, ip_last)
+            result = Array.new
+            init = ip_init.split('.')[3].to_i
+            last = ip_last.split('.')[3].to_i
+            body_init = ip_init.split('.')[0..2].join('.')
+            body_last = ip_last.split('.')[0..2].join('.')
+            if(init < last) and (body_init==body_last)
+                (init..last).each{|num|
+                    result << "#{body_init}.#{num}"
+                }
+            end
+            return result
+        end
+        def self.init(ip)
+            base = ip.split('.')
+            base[-1] = "1"
+            return base.join('.')
+        end
+    end
+end