whos_dated_who 0.0.1

data/vendor/bundle/gems/tzinfo-1.2.1/lib/tzinfo/timezone.rb

@@ -0,0 +1,636 @@
+require 'date'
+require 'set'
+require 'thread_safe'
+
+module TZInfo
+  # AmbiguousTime is raised to indicates that a specified time in a local 
+  # timezone has more than one possible equivalent UTC time. This happens when 
+  # transitioning from daylight savings time to standard time where the clocks 
+  # are rolled back.
+  #
+  # AmbiguousTime is raised by period_for_local and local_to_utc when using an 
+  # ambiguous time and not specifying any means to resolve the ambiguity.
+  class AmbiguousTime < StandardError
+  end
+  
+  # PeriodNotFound is raised to indicate that no TimezonePeriod matching a given
+  # time could be found.
+  class PeriodNotFound < StandardError
+  end
+  
+  # Raised by Timezone#get if the identifier given is not valid.
+  class InvalidTimezoneIdentifier < StandardError
+  end
+  
+  # Raised if an attempt is made to use a timezone created with
+  # Timezone.new(nil).
+  class UnknownTimezone < StandardError
+  end
+  
+  # Timezone is the base class of all timezones. It provides a factory method,
+  # 'get', to access timezones by identifier. Once a specific Timezone has been
+  # retrieved, DateTimes, Times and timestamps can be converted between the UTC 
+  # and the local time for the zone. For example:
+  #
+  #   tz = TZInfo::Timezone.get('America/New_York')
+  #   puts tz.utc_to_local(DateTime.new(2005,8,29,15,35,0)).to_s
+  #   puts tz.local_to_utc(Time.utc(2005,8,29,11,35,0)).to_s
+  #   puts tz.utc_to_local(1125315300).to_s
+  #
+  # Each time conversion method returns an object of the same type it was 
+  # passed.
+  #
+  # The Timezone class is thread-safe. It is safe to use class and instance 
+  # methods of Timezone in concurrently executing threads. Instances of Timezone
+  # can be shared across thread boundaries.
+  class Timezone
+    include Comparable
+    
+    # Cache of loaded zones by identifier to avoid using require if a zone
+    # has already been loaded.
+    #
+    # @!visibility private
+    @@loaded_zones = nil
+        
+    # Default value of the dst parameter of the local_to_utc and 
+    # period_for_local methods.
+    #
+    # @!visibility private
+    @@default_dst = nil
+    
+    # Sets the default value of the optional dst parameter of the 
+    # local_to_utc and period_for_local methods. Can be set to nil, true or 
+    # false.
+    #
+    # The value of default_dst defaults to nil if unset.
+    def self.default_dst=(value)
+      @@default_dst = value.nil? ? nil : !!value
+    end
+    
+    # Gets the default value of the optional dst parameter of the 
+    # local_to_utc and period_for_local methods. Can be set to nil, true or 
+    # false.
+    def self.default_dst
+      @@default_dst
+    end
+    
+    # Returns a timezone by its identifier (e.g. "Europe/London", 
+    # "America/Chicago" or "UTC").
+    #
+    # Raises InvalidTimezoneIdentifier if the timezone couldn't be found.
+    def self.get(identifier)
+      instance = @@loaded_zones[identifier]
+      
+      unless instance
+        # Thread-safety: It is possible that multiple equivalent Timezone 
+        # instances could be created here in concurrently executing threads. 
+        # The consequences of this are that the data may be loaded more than 
+        # once (depending on the data source) and memoized calculations could
+        # be discarded. The performance benefit of ensuring that only a single
+        # instance is created is unlikely to be worth the overhead of only
+        # allowing one Timezone to be loaded at a time.
+        info = data_source.load_timezone_info(identifier)
+        instance = info.create_timezone
+        @@loaded_zones[instance.identifier] = instance         
+      end
+      
+      instance
+    end
+    
+    # Returns a proxy for the Timezone with the given identifier. The proxy
+    # will cause the real timezone to be loaded when an attempt is made to 
+    # find a period or convert a time. get_proxy will not validate the 
+    # identifier. If an invalid identifier is specified, no exception will be 
+    # raised until the proxy is used. 
+    def self.get_proxy(identifier)
+      TimezoneProxy.new(identifier)
+    end
+    
+    # If identifier is nil calls super(), otherwise calls get. An identfier 
+    # should always be passed in when called externally.
+    def self.new(identifier = nil)
+      if identifier        
+        get(identifier)
+      else
+        super()
+      end
+    end
+    
+    # Returns an array containing all the available Timezones.
+    #
+    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
+    # definitions until a conversion is actually required.
+    def self.all
+      get_proxies(all_identifiers)
+    end
+    
+    # Returns an array containing the identifiers of all the available 
+    # Timezones.
+    def self.all_identifiers
+      data_source.timezone_identifiers
+    end
+    
+    # Returns an array containing all the available Timezones that are based
+    # on data (are not links to other Timezones).
+    #
+    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
+    # definitions until a conversion is actually required.
+    def self.all_data_zones
+      get_proxies(all_data_zone_identifiers)
+    end
+    
+    # Returns an array containing the identifiers of all the available 
+    # Timezones that are based on data (are not links to other Timezones)..
+    def self.all_data_zone_identifiers
+      data_source.data_timezone_identifiers
+    end
+    
+    # Returns an array containing all the available Timezones that are links
+    # to other Timezones.
+    #
+    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
+    # definitions until a conversion is actually required.
+    def self.all_linked_zones
+      get_proxies(all_linked_zone_identifiers)      
+    end
+    
+    # Returns an array containing the identifiers of all the available 
+    # Timezones that are links to other Timezones.
+    def self.all_linked_zone_identifiers
+      data_source.linked_timezone_identifiers
+    end
+    
+    # Returns all the Timezones defined for all Countries. This is not the
+    # complete set of Timezones as some are not country specific (e.g. 
+    # 'Etc/GMT').
+    # 
+    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
+    # definitions until a conversion is actually required.        
+    def self.all_country_zones
+      Country.all_codes.inject([]) {|zones,country|
+        zones += Country.get(country).zones
+      }
+    end
+    
+    # Returns all the zone identifiers defined for all Countries. This is not the
+    # complete set of zone identifiers as some are not country specific (e.g. 
+    # 'Etc/GMT'). You can obtain a Timezone instance for a given identifier
+    # with the get method.
+    def self.all_country_zone_identifiers
+      Country.all_codes.inject([]) {|zones,country|
+        zones += Country.get(country).zone_identifiers
+      }
+    end
+    
+    # Returns all US Timezone instances. A shortcut for 
+    # TZInfo::Country.get('US').zones.
+    #
+    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
+    # definitions until a conversion is actually required.
+    def self.us_zones
+      Country.get('US').zones
+    end
+    
+    # Returns all US zone identifiers. A shortcut for 
+    # TZInfo::Country.get('US').zone_identifiers.
+    def self.us_zone_identifiers
+      Country.get('US').zone_identifiers
+    end
+    
+    # The identifier of the timezone, e.g. "Europe/Paris".
+    def identifier
+      raise_unknown_timezone
+    end
+    
+    # An alias for identifier.
+    def name
+      # Don't use alias, as identifier gets overridden.
+      identifier
+    end
+    
+    # Returns a friendlier version of the identifier.
+    def to_s
+      friendly_identifier
+    end
+    
+    # Returns internal object state as a programmer-readable string.
+    def inspect
+      "#<#{self.class}: #{identifier}>"
+    end
+    
+    # Returns a friendlier version of the identifier. Set skip_first_part to 
+    # omit the first part of the identifier (typically a region name) where
+    # there is more than one part.
+    #
+    # For example:
+    #
+    #   Timezone.get('Europe/Paris').friendly_identifier(false)          #=> "Europe - Paris"
+    #   Timezone.get('Europe/Paris').friendly_identifier(true)           #=> "Paris"
+    #   Timezone.get('America/Indiana/Knox').friendly_identifier(false)  #=> "America - Knox, Indiana"
+    #   Timezone.get('America/Indiana/Knox').friendly_identifier(true)   #=> "Knox, Indiana"           
+    def friendly_identifier(skip_first_part = false)
+      parts = identifier.split('/')
+      if parts.empty?
+        # shouldn't happen
+        identifier
+      elsif parts.length == 1        
+        parts[0]
+      else
+        if skip_first_part
+          result = ''
+        else
+          result = parts[0] + ' - '
+        end
+        
+        parts[1, parts.length - 1].reverse_each {|part|
+          part.gsub!(/_/, ' ')
+          
+          if part.index(/[a-z]/)
+            # Missing a space if a lower case followed by an upper case and the
+            # name isn't McXxxx.
+            part.gsub!(/([^M][a-z])([A-Z])/, '\1 \2')
+            part.gsub!(/([M][a-bd-z])([A-Z])/, '\1 \2')
+            
+            # Missing an apostrophe if two consecutive upper case characters.
+            part.gsub!(/([A-Z])([A-Z])/, '\1\'\2')
+          end
+          
+          result << part
+          result << ', '
+        }
+        
+        result.slice!(result.length - 2, 2)
+        result
+      end
+    end
+    
+    # Returns the TimezonePeriod for the given UTC time. utc can either be
+    # a DateTime, Time or integer timestamp (Time.to_i). Any timezone 
+    # information in utc is ignored (it is treated as a UTC time).        
+    def period_for_utc(utc)            
+      raise_unknown_timezone
+    end
+    
+    # Returns the set of TimezonePeriod instances that are valid for the given
+    # local time as an array. If you just want a single period, use 
+    # period_for_local instead and specify how ambiguities should be resolved.
+    # Returns an empty array if no periods are found for the given time.
+    def periods_for_local(local)
+      raise_unknown_timezone
+    end
+    
+    # Returns an Array of TimezoneTransition instances representing the times
+    # where the UTC offset of the timezone changes.
+    #
+    # Transitions are returned up to a given date and time up to a given date 
+    # and time, specified in UTC (utc_to).
+    #
+    # A from date and time may also be supplied using the utc_from parameter
+    # (also specified in UTC). If utc_from is not nil, only transitions from 
+    # that date and time onwards will be returned.
+    #
+    # Comparisons with utc_to are exclusive. Comparisons with utc_from are
+    # inclusive. If a transition falls precisely on utc_to, it will be excluded.
+    # If a transition falls on utc_from, it will be included.
+    #
+    # Transitions returned are ordered by when they occur, from earliest to 
+    # latest.
+    #
+    # utc_to and utc_from can be specified using either DateTime, Time or 
+    # integer timestamps (Time.to_i).
+    #
+    # If utc_from is specified and utc_to is not greater than utc_from, then
+    # transitions_up_to raises an ArgumentError exception.
+    def transitions_up_to(utc_to, utc_from = nil)
+      raise_unknown_timezone
+    end
+    
+    # Returns the canonical Timezone instance for this Timezone.
+    #
+    # The IANA Time Zone database contains two types of definition: Zones and 
+    # Links. Zones are defined by rules that set out when transitions occur. 
+    # Links are just references to fully defined Zone, creating an alias for 
+    # that Zone.
+    #
+    # Links are commonly used where a time zone has been renamed in a 
+    # release of the Time Zone database. For example, the Zone US/Eastern was 
+    # renamed as America/New_York. A US/Eastern Link was added in its place,
+    # linking to (and creating an alias for) for America/New_York.
+    #
+    # Links are also used for time zones that are currently identical to a full 
+    # Zone, but that are administered seperately. For example, Europe/Vatican is
+    # a Link to (and alias for) Europe/Rome.
+    #
+    # For a full Zone, canonical_zone returns self.
+    #
+    # For a Link, canonical_zone returns a Timezone instance representing the 
+    # full Zone that the link targets.
+    #
+    # TZInfo can be used with different data sources (see the documentation for
+    # TZInfo::DataSource). Please note that some DataSource implementations may 
+    # not support distinguishing between full Zones and Links and will treat all
+    # time zones as full Zones. In this case, the canonical_zone will always 
+    # return self.
+    #
+    # There are two built-in DataSource implementations. RubyDataSource (which
+    # will be used if the tzinfo-data gem is available) supports Link zones.
+    # ZoneinfoDataSource returns Link zones as if they were full Zones. If the 
+    # canonical_zone or canonical_identifier methods are required, the 
+    # tzinfo-data gem should be installed.
+    #
+    # The TZInfo::DataSource.get method can be used to check which DataSource 
+    # implementation is being used.
+    def canonical_zone
+      raise_unknown_timezone
+    end
+    
+    # Returns the TimezonePeriod for the given local time. local can either be
+    # a DateTime, Time or integer timestamp (Time.to_i). Any timezone 
+    # information in local is ignored (it is treated as a time in the current 
+    # timezone).
+    #
+    # Warning: There are local times that have no equivalent UTC times (e.g.
+    # in the transition from standard time to daylight savings time). There are
+    # also local times that have more than one UTC equivalent (e.g. in the
+    # transition from daylight savings time to standard time).
+    #
+    # In the first case (no equivalent UTC time), a PeriodNotFound exception
+    # will be raised.
+    #
+    # In the second case (more than one equivalent UTC time), an AmbiguousTime
+    # exception will be raised unless the optional dst parameter or block
+    # handles the ambiguity. 
+    #
+    # If the ambiguity is due to a transition from daylight savings time to
+    # standard time, the dst parameter can be used to select whether the 
+    # daylight savings time or local time is used. For example,
+    #
+    #   Timezone.get('America/New_York').period_for_local(DateTime.new(2004,10,31,1,30,0))
+    #
+    # would raise an AmbiguousTime exception.
+    #
+    # Specifying dst=true would the daylight savings period from April to 
+    # October 2004. Specifying dst=false would return the standard period
+    # from October 2004 to April 2005.
+    #
+    # If the dst parameter does not resolve the ambiguity, and a block is 
+    # specified, it is called. The block must take a single parameter - an
+    # array of the periods that need to be resolved. The block can select and
+    # return a single period or return nil or an empty array
+    # to cause an AmbiguousTime exception to be raised.
+    #
+    # The default value of the dst parameter can be specified by setting
+    # Timezone.default_dst. If default_dst is not set, or is set to nil, then
+    # an AmbiguousTime exception will be raised in ambiguous situations unless
+    # a block is given to resolve the ambiguity.
+    def period_for_local(local, dst = Timezone.default_dst)
+      results = periods_for_local(local)
+      
+      if results.empty?
+        raise PeriodNotFound
+      elsif results.size < 2
+        results.first
+      else
+        # ambiguous result try to resolve
+        
+        if !dst.nil?
+          matches = results.find_all {|period| period.dst? == dst}
+          results = matches if !matches.empty?            
+        end
+        
+        if results.size < 2
+          results.first
+        else
+          # still ambiguous, try the block
+                    
+          if block_given?
+            results = yield results
+          end
+          
+          if results.is_a?(TimezonePeriod)
+            results
+          elsif results && results.size == 1
+            results.first
+          else          
+            raise AmbiguousTime, "#{local} is an ambiguous local time."
+          end
+        end
+      end      
+    end
+    
+    # Converts a time in UTC to the local timezone. utc can either be
+    # a DateTime, Time or timestamp (Time.to_i). The returned time has the same
+    # type as utc. Any timezone information in utc is ignored (it is treated as 
+    # a UTC time).
+    def utc_to_local(utc)
+      TimeOrDateTime.wrap(utc) {|wrapped|
+        period_for_utc(wrapped).to_local(wrapped)
+      }
+    end
+    
+    # Converts a time in the local timezone to UTC. local can either be
+    # a DateTime, Time or timestamp (Time.to_i). The returned time has the same
+    # type as local. Any timezone information in local is ignored (it is treated
+    # as a local time).
+    #
+    # Warning: There are local times that have no equivalent UTC times (e.g.
+    # in the transition from standard time to daylight savings time). There are
+    # also local times that have more than one UTC equivalent (e.g. in the
+    # transition from daylight savings time to standard time).
+    #
+    # In the first case (no equivalent UTC time), a PeriodNotFound exception
+    # will be raised.
+    #
+    # In the second case (more than one equivalent UTC time), an AmbiguousTime
+    # exception will be raised unless the optional dst parameter or block
+    # handles the ambiguity. 
+    #
+    # If the ambiguity is due to a transition from daylight savings time to
+    # standard time, the dst parameter can be used to select whether the 
+    # daylight savings time or local time is used. For example,
+    #
+    #   Timezone.get('America/New_York').local_to_utc(DateTime.new(2004,10,31,1,30,0))
+    #
+    # would raise an AmbiguousTime exception.
+    #
+    # Specifying dst=true would return 2004-10-31 5:30:00. Specifying dst=false
+    # would return 2004-10-31 6:30:00.
+    #
+    # If the dst parameter does not resolve the ambiguity, and a block is 
+    # specified, it is called. The block must take a single parameter - an
+    # array of the periods that need to be resolved. The block can return a
+    # single period to use to convert the time or return nil or an empty array
+    # to cause an AmbiguousTime exception to be raised.
+    #
+    # The default value of the dst parameter can be specified by setting
+    # Timezone.default_dst. If default_dst is not set, or is set to nil, then
+    # an AmbiguousTime exception will be raised in ambiguous situations unless
+    # a block is given to resolve the ambiguity.
+    def local_to_utc(local, dst = Timezone.default_dst)
+      TimeOrDateTime.wrap(local) {|wrapped|
+        if block_given?
+          period = period_for_local(wrapped, dst) {|periods| yield periods }
+        else
+          period = period_for_local(wrapped, dst)
+        end
+        
+        period.to_utc(wrapped)
+      }
+    end
+    
+    # Returns information about offsets used by the Timezone up to a given
+    # date and time, specified using UTC (utc_to). The information is returned
+    # as an Array of TimezoneOffset instances.
+    #
+    # A from date and time may also be supplied using the utc_from parameter
+    # (also specified in UTC). If utc_from is not nil, only offsets used from 
+    # that date and time forward will be returned.
+    #
+    # Comparisons with utc_to are exclusive. Comparisons with utc_from are
+    # inclusive.
+    #
+    # Offsets may be returned in any order.
+    #
+    # utc_to and utc_from can be specified using either DateTime, Time or 
+    # integer timestamps (Time.to_i).
+    #
+    # If utc_from is specified and utc_to is not greater than utc_from, then
+    # offsets_up_to raises an ArgumentError exception.
+    def offsets_up_to(utc_to, utc_from = nil)
+      utc_to = TimeOrDateTime.wrap(utc_to)
+      transitions = transitions_up_to(utc_to, utc_from)
+      
+      if transitions.empty?
+        # No transitions in the range, find the period that covers it.
+
+        if utc_from
+          # Use the from date as it is inclusive.
+          period = period_for_utc(utc_from)
+        else
+          # utc_to is exclusive, so this can't be used with period_for_utc.
+          # However, any time earlier than utc_to can be used.
+          
+          # Subtract 1 hour (since this is one of the cached OffsetRationals).
+          # Use add_with_convert so that conversion to DateTime is performed if
+          # required.
+          period = period_for_utc(utc_to.add_with_convert(-3600))
+        end
+      
+        [period.offset]
+      else
+        result = Set.new
+        
+        first = transitions.first        
+        result << first.previous_offset unless utc_from && first.at == utc_from
+        
+        transitions.each do |t|
+          result << t.offset
+        end
+        
+        result.to_a
+      end
+    end
+    
+    # Returns the canonical identifier for this Timezone.
+    #
+    # This is a shortcut for calling canonical_zone.identifier. Please refer
+    # to the canonical_zone documentation for further information.
+    def canonical_identifier
+      canonical_zone.identifier
+    end
+    
+    # Returns the current time in the timezone as a Time.
+    def now
+      utc_to_local(Time.now.utc)
+    end
+    
+    # Returns the TimezonePeriod for the current time. 
+    def current_period
+      period_for_utc(Time.now.utc)
+    end
+    
+    # Returns the current Time and TimezonePeriod as an array. The first element
+    # is the time, the second element is the period.
+    def current_period_and_time
+      utc = Time.now.utc
+      period = period_for_utc(utc)
+      [period.to_local(utc), period]
+    end
+    
+    alias :current_time_and_period :current_period_and_time
+
+    # Converts a time in UTC to local time and returns it as a string 
+    # according to the given format. The formatting is identical to 
+    # Time.strftime and DateTime.strftime, except %Z is replaced with the
+    # timezone abbreviation for the specified time (for example, EST or EDT).        
+    def strftime(format, utc = Time.now.utc)      
+      period = period_for_utc(utc)
+      local = period.to_local(utc)      
+      local = Time.at(local).utc unless local.kind_of?(Time) || local.kind_of?(DateTime)
+      abbreviation = period.abbreviation.to_s.gsub(/%/, '%%')
+      
+      format = format.gsub(/(.?)%Z/) do
+        if $1 == '%'
+          # return %%Z so the real strftime treats it as a literal %Z too
+          '%%Z'
+        else
+          "#$1#{abbreviation}"
+        end
+      end
+      
+      local.strftime(format)
+    end
+    
+    # Compares two Timezones based on their identifier. Returns -1 if tz is less
+    # than self, 0 if tz is equal to self and +1 if tz is greater than self.
+    #
+    # Returns nil if tz is not comparable with Timezone instances.
+    def <=>(tz)
+      return nil unless tz.is_a?(Timezone)
+      identifier <=> tz.identifier
+    end
+
+    # Returns true if and only if the identifier of tz is equal to the 
+    # identifier of this Timezone.
+    def eql?(tz)
+      self == tz
+    end
+    
+    # Returns a hash of this Timezone.
+    def hash
+      identifier.hash
+    end
+    
+    # Dumps this Timezone for marshalling.
+    def _dump(limit)
+      identifier
+    end
+    
+    # Loads a marshalled Timezone.
+    def self._load(data)
+      Timezone.get(data)
+    end
+    
+    private
+      # Initializes @@loaded_zones.
+      def self.init_loaded_zones
+        @@loaded_zones = ThreadSafe::Cache.new
+      end
+      init_loaded_zones
+    
+      # Returns an array of proxies corresponding to the given array of 
+      # identifiers.
+      def self.get_proxies(identifiers)
+        identifiers.collect {|identifier| get_proxy(identifier)}
+      end
+      
+      # Returns the current DataSource
+      def self.data_source
+        DataSource.get
+      end
+
+      def raise_unknown_timezone
+        raise UnknownTimezone, 'TZInfo::Timezone constructed directly'
+      end
+  end        
+end

data/vendor/bundle/gems/tzinfo-1.2.1/lib/tzinfo/timezone_definition.rb

@@ -0,0 +1,36 @@
+module TZInfo
+  
+  # TimezoneDefinition is included into Timezone definition modules.
+  # TimezoneDefinition provides the methods for defining timezones.
+  #
+  # @private
+  module TimezoneDefinition #:nodoc:
+    # Add class methods to the includee.
+    def self.append_features(base)
+      super
+      base.extend(ClassMethods)
+    end
+    
+    # Class methods for inclusion.
+    #
+    # @private
+    module ClassMethods #:nodoc:
+      # Returns and yields a TransitionDataTimezoneInfo object to define a 
+      # timezone.
+      def timezone(identifier)
+        yield @timezone = TransitionDataTimezoneInfo.new(identifier)
+      end
+      
+      # Defines a linked timezone.
+      def linked_timezone(identifier, link_to_identifier)
+        @timezone = LinkedTimezoneInfo.new(identifier, link_to_identifier)
+      end
+      
+      # Returns the last TimezoneInfo to be defined with timezone or 
+      # linked_timezone.
+      def get
+        @timezone
+      end
+    end
+  end
+end