websolr-rails 1.4.4 → 2.0.0

data/solr/solr/conf/scripts.conf

@@ -1,24 +0,0 @@
-# Licensed to the Apache Software Foundation (ASF) under one or more
-# contributor license agreements.  See the NOTICE file distributed with
-# this work for additional information regarding copyright ownership.
-# The ASF licenses this file to You under the Apache License, Version 2.0
-# (the "License"); you may not use this file except in compliance with
-# the License.  You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-user=
-solr_hostname=localhost
-solr_port=8983
-rsyncd_port=18983
-data_dir=
-webapp_name=solr
-master_host=
-master_data_dir=
-master_status_dir=

data/solr/solr/conf/solrconfig.xml

@@ -1,458 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" ?>
-<!--
- Licensed to the Apache Software Foundation (ASF) under one or more
- contributor license agreements.  See the NOTICE file distributed with
- this work for additional information regarding copyright ownership.
- The ASF licenses this file to You under the Apache License, Version 2.0
- (the "License"); you may not use this file except in compliance with
- the License.  You may obtain a copy of the License at
-
-     http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
--->
-
-<config>
-  <!-- Set this to 'false' if you want solr to continue working after it has 
-       encountered an severe configuration error.  In a production environment, 
-       you may want solr to keep working even if one handler is mis-configured.
-
-       You may also set this to false using by setting the system property:
-         -Dsolr.abortOnConfigurationError=false
-     -->
-  <abortOnConfigurationError>${solr.abortOnConfigurationError:true}</abortOnConfigurationError>
-
-  <!-- Used to specify an alternate directory to hold all index data
-       other than the default ./data under the Solr home.
-       If replication is in use, this should match the replication configuration. -->
-
-  <dataDir>${solr.data.dir:./solr/data}</dataDir>
-
-  <indexDefaults>
-   <!-- Values here affect all index writers and act as a default unless overridden. -->
-    <useCompoundFile>false</useCompoundFile>
-    <mergeFactor>10</mergeFactor>
-    <maxBufferedDocs>1000</maxBufferedDocs>
-    <maxMergeDocs>2147483647</maxMergeDocs>
-    <maxFieldLength>10000</maxFieldLength>
-    <writeLockTimeout>1000</writeLockTimeout>
-    <commitLockTimeout>10000</commitLockTimeout>
-  </indexDefaults>
-
-  <mainIndex>
-    <!-- options specific to the main on-disk lucene index -->
-    <useCompoundFile>false</useCompoundFile>
-    <mergeFactor>10</mergeFactor>
-    <maxBufferedDocs>1000</maxBufferedDocs>
-    <maxMergeDocs>2147483647</maxMergeDocs>
-    <maxFieldLength>10000</maxFieldLength>
-
-    <!-- If true, unlock any held write or commit locks on startup. 
-         This defeats the locking mechanism that allows multiple
-         processes to safely access a lucene index, and should be
-         used with care. -->
-    <unlockOnStartup>false</unlockOnStartup>
-  </mainIndex>
-
-  <!-- the default high-performance update handler -->
-  <updateHandler class="solr.DirectUpdateHandler2">
-
-    <!-- A prefix of "solr." for class names is an alias that
-         causes solr to search appropriate packages, including
-         org.apache.solr.(search|update|request|core|analysis)
-     -->
-
-    <!-- autocommit pending docs if certain criteria are met 
-    <autoCommit> 
-      <maxDocs>10000</maxDocs>
-      <maxTime>1000</maxTime>
-    </autoCommit>
-    -->
-
-    <!-- The RunExecutableListener executes an external command.
-         exe - the name of the executable to run
-         dir - dir to use as the current working directory. default="."
-         wait - the calling thread waits until the executable returns. default="true"
-         args - the arguments to pass to the program.  default=nothing
-         env - environment variables to set.  default=nothing
-      -->
-    <!-- A postCommit event is fired after every commit or optimize command
-    <listener event="postCommit" class="solr.RunExecutableListener">
-      <str name="exe">snapshooter</str>
-      <str name="dir">solr/bin</str>
-      <bool name="wait">true</bool>
-      <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
-      <arr name="env"> <str>MYVAR=val1</str> </arr>
-    </listener>
-    -->
-    <!-- A postOptimize event is fired only after every optimize command, useful
-         in conjunction with index distribution to only distribute optimized indicies 
-    <listener event="postOptimize" class="solr.RunExecutableListener">
-      <str name="exe">snapshooter</str>
-      <str name="dir">solr/bin</str>
-      <bool name="wait">true</bool>
-    </listener>
-    -->
-
-  </updateHandler>
-
-
-  <query>
-    <!-- Maximum number of clauses in a boolean query... can affect
-        range or prefix queries that expand to big boolean
-        queries.  An exception is thrown if exceeded.  -->
-    <maxBooleanClauses>1024</maxBooleanClauses>
-
-    
-    <!-- Cache used by SolrIndexSearcher for filters (DocSets),
-         unordered sets of *all* documents that match a query.
-         When a new searcher is opened, its caches may be prepopulated
-         or "autowarmed" using data from caches in the old searcher.
-         autowarmCount is the number of items to prepopulate.  For LRUCache,
-         the autowarmed items will be the most recently accessed items.
-       Parameters:
-         class - the SolrCache implementation (currently only LRUCache)
-         size - the maximum number of entries in the cache
-         initialSize - the initial capacity (number of entries) of
-           the cache.  (seel java.util.HashMap)
-         autowarmCount - the number of entries to prepopulate from
-           and old cache.
-         -->
-    <filterCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="256"/>
-
-   <!-- queryResultCache caches results of searches - ordered lists of
-         document ids (DocList) based on a query, a sort, and the range
-         of documents requested.  -->
-    <queryResultCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="256"/>
-
-  <!-- documentCache caches Lucene Document objects (the stored fields for each document).
-       Since Lucene internal document ids are transient, this cache will not be autowarmed.  -->
-    <documentCache
-      class="solr.LRUCache"
-      size="512"
-      initialSize="512"
-      autowarmCount="0"/>
-
-    <!-- If true, stored fields that are not requested will be loaded lazily.
-
-    This can result in a significant speed improvement if the usual case is to
-    not load all stored fields, especially if the skipped fields are large compressed
-    text fields.
-    -->
-    <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
-    <!-- Example of a generic cache.  These caches may be accessed by name
-         through SolrIndexSearcher.getCache(),cacheLookup(), and cacheInsert().
-         The purpose is to enable easy caching of user/application level data.
-         The regenerator argument should be specified as an implementation
-         of solr.search.CacheRegenerator if autowarming is desired.  -->
-    <!--
-    <cache name="myUserCache"
-      class="solr.LRUCache"
-      size="4096"
-      initialSize="1024"
-      autowarmCount="1024"
-      regenerator="org.mycompany.mypackage.MyRegenerator"
-      />
-    -->
-
-   <!-- An optimization that attempts to use a filter to satisfy a search.
-         If the requested sort does not include score, then the filterCache
-         will be checked for a filter matching the query. If found, the filter
-         will be used as the source of document ids, and then the sort will be
-         applied to that.
-    <useFilterForSortedQuery>true</useFilterForSortedQuery>
-   -->
-
-   <!-- An optimization for use with the queryResultCache.  When a search
-         is requested, a superset of the requested number of document ids
-         are collected.  For example, if a search for a particular query
-         requests matching documents 10 through 19, and queryWindowSize is 50,
-         then documents 0 through 50 will be collected and cached.  Any further
-         requests in that range can be satisfied via the cache.  -->
-    <queryResultWindowSize>10</queryResultWindowSize>
-
-    <!-- This entry enables an int hash representation for filters (DocSets)
-         when the number of items in the set is less than maxSize.  For smaller
-         sets, this representation is more memory efficient, more efficient to
-         iterate over, and faster to take intersections.  -->
-    <HashDocSet maxSize="3000" loadFactor="0.75"/>
-
-
-    <!-- boolToFilterOptimizer converts boolean clauses with zero boost
-         into cached filters if the number of docs selected by the clause exceeds
-         the threshold (represented as a fraction of the total index) -->
-    <boolTofilterOptimizer enabled="true" cacheSize="32" threshold=".05"/>
-
-
-    <!-- a newSearcher event is fired whenever a new searcher is being prepared
-         and there is a current searcher handling requests (aka registered). -->
-    <!-- QuerySenderListener takes an array of NamedList and executes a
-         local query request for each NamedList in sequence. -->
-    <!--
-    <listener event="newSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst> <str name="q">solr</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-        <lst> <str name="q">rocks</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-      </arr>
-    </listener>
-    -->
-
-    <!-- a firstSearcher event is fired whenever a new searcher is being
-         prepared but there is no current registered searcher to handle
-         requests or to gain autowarming data from. -->
-    <!--
-    <listener event="firstSearcher" class="solr.QuerySenderListener">
-      <arr name="queries">
-        <lst> <str name="q">fast_warm</str> <str name="start">0</str> <str name="rows">10</str> </lst>
-      </arr>
-    </listener>
-    -->
-
-    <!-- If a search request comes in and there is no current registered searcher,
-         then immediately register the still warming searcher and use it.  If
-         "false" then all requests will block until the first searcher is done
-         warming. -->
-    <useColdSearcher>false</useColdSearcher>
-
-    <!-- Maximum number of searchers that may be warming in the background
-      concurrently.  An error is returned if this limit is exceeded. Recommend
-      1-2 for read-only slaves, higher for masters w/o cache warming. -->
-    <maxWarmingSearchers>4</maxWarmingSearchers>
-
-  </query>
-
-  <!-- 
-    Let the dispatch filter handler /select?qt=XXX
-    handleSelect=true will use consistent error handling for /select and /update
-    handleSelect=false will use solr1.1 style error formatting
-    -->
-  <requestDispatcher handleSelect="true" >
-    <!--Make sure your system has some authentication before enabling remote streaming!  -->
-    <requestParsers enableRemoteStreaming="false" multipartUploadLimitInKB="2048" />
-  </requestDispatcher>
-  
-      
-  <!-- requestHandler plugins... incoming queries will be dispatched to the
-     correct handler based on the qt (query type) param matching the
-     name of registered handlers.
-     The "standard" request handler is the default and will be used if qt
-     is not specified in the request.
-  -->
-  <requestHandler name="standard" class="solr.StandardRequestHandler">
-    <!-- default values for query parameters -->
-     <lst name="defaults">
-       <str name="echoParams">explicit</str>
-	   <str name="json.nl">map</str>
-       <!-- 
-       <int name="rows">10</int>
-       <str name="fl">*</str>
-       <str name="version">2.1</str>
-        -->
-     </lst>
-  </requestHandler>
-
-  <!-- DisMaxRequestHandler allows easy searching across multiple fields
-       for simple user-entered phrases. 
-       see http://wiki.apache.org/solr/DisMaxRequestHandler
-   -->
-  <requestHandler name="dismax" class="solr.DisMaxRequestHandler" >
-    <lst name="defaults">
-     <str name="echoParams">explicit</str>
-     <float name="tie">0.01</float>
-     <str name="qf">
-        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-     </str>
-     <str name="pf">
-        text^0.2 features^1.1 name^1.5 manu^1.4 manu_exact^1.9
-     </str>
-     <str name="bf">
-        ord(poplarity)^0.5 recip(rord(price),1,1000,1000)^0.3
-     </str>
-     <str name="fl">
-        id,name,price,score
-     </str>
-     <str name="mm">
-        2&lt;-1 5&lt;-2 6&lt;90%
-     </str>
-     <int name="ps">100</int>
-     <str name="q.alt">*:*</str>
-    </lst>
-  </requestHandler>
-
-  <!-- Note how you can register the same handler multiple times with
-       different names (and different init parameters)
-    -->
-  <requestHandler name="partitioned" class="solr.DisMaxRequestHandler" >
-    <lst name="defaults">
-     <str name="echoParams">explicit</str>
-     <str name="qf">text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0</str>
-     <str name="mm">2&lt;-1 5&lt;-2 6&lt;90%</str>
-     <!-- This is an example of using Date Math to specify a constantly
-          moving date range in a config...
-       -->
-     <str name="bq">incubationdate_dt:[* TO NOW/DAY-1MONTH]^2.2</str>
-    </lst>
-    <!-- In addition to defaults, "appends" params can be specified
-         to identify values which should be appended to the list of
-         multi-val params from the query (or the existing "defaults").
-
-         In this example, the param "fq=instock:true" will be appended to
-         any query time fq params the user may specify, as a mechanism for
-         partitioning the index, independent of any user selected filtering
-         that may also be desired (perhaps as a result of faceted searching).
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "appends" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <lst name="appends">
-      <str name="fq">inStock:true</str>
-    </lst>
-    <!-- "invariants" are a way of letting the Solr maintainer lock down
-         the options available to Solr clients.  Any params values
-         specified here are used regardless of what values may be specified
-         in either the query, the "defaults", or the "appends" params.
-
-         In this example, the facet.field and facet.query params are fixed,
-         limiting the facets clients can use.  Faceting is not turned on by
-         default - but if the client does specify facet=true in the request,
-         these are the only facets they will be able to see counts for;
-         regardless of what other facet.field or facet.query params they
-         may specify.
-
-         NOTE: there is *absolutely* nothing a client can do to prevent these
-         "invariants" values from being used, so don't use this mechanism
-         unless you are sure you always want it.
-      -->
-    <lst name="invariants">
-      <str name="facet.field">cat</str>
-      <str name="facet.field">manu_exact</str>
-      <str name="facet.query">price:[* TO 500]</str>
-      <str name="facet.query">price:[500 TO *]</str>
-    </lst>
-  </requestHandler>
-  
-  <requestHandler name="instock" class="solr.DisMaxRequestHandler" >
-    <!-- for legacy reasons, DisMaxRequestHandler will assume all init
-         params are "defaults" if you don't explicitly specify any defaults.
-      -->
-     <str name="fq">
-        inStock:true
-     </str>
-     <str name="qf">
-        text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
-     </str>
-     <str name="mm">
-        2&lt;-1 5&lt;-2 6&lt;90%
-     </str>
-  </requestHandler>
-
-
-  <!-- SpellCheckerRequestHandler takes in a word (or several words) as the
-       value of the "q" parameter and returns a list of alternative spelling
-       suggestions.  If invoked with a ...&cmd=rebuild, it will rebuild the
-       spellchecker index.
-  -->
-  <requestHandler name="spellchecker" class="solr.SpellCheckerRequestHandler" startup="lazy">
-    <!-- default values for query parameters -->
-     <lst name="defaults">
-       <int name="suggestionCount">1</int>
-       <float name="accuracy">0.5</float>
-     </lst>
-     
-     <!-- Main init params for handler -->
-     
-     <!-- The directory where your SpellChecker Index should live.   -->
-     <!-- May be absolute, or relative to the Solr "dataDir" directory. -->
-     <!-- If this option is not specified, a RAM directory will be used -->
-     <str name="spellcheckerIndexDir">spell</str>
-     
-     <!-- the field in your schema that you want to be able to build -->
-     <!-- your spell index on. This should be a field that uses a very -->
-     <!-- simple FieldType without a lot of Analysis (ie: string) -->
-     <str name="termSourceField">word</str>
-     
-   </requestHandler>
-
-  
-  <!-- Update request handler.  
-  
-       Note: Since solr1.1 requestHandlers requires a valid content type header if posted in 
-       the body. For example, curl now requires: -H 'Content-type:text/xml; charset=utf-8'
-       The response format differs from solr1.1 formatting and returns a standard error code.
-       
-       To enable solr1.1 behavior, remove the /update handler or change its path
-    -->
-  <requestHandler name="/update" class="solr.XmlUpdateRequestHandler" />
-
-  <!-- CSV update handler, loaded on demand -->
-  <requestHandler name="/update/csv" class="solr.CSVRequestHandler" startup="lazy" />
-
-
-  <!-- Admin Handlers.  TODO? There could be a single handler that loads them all... -->
-  <requestHandler name="/admin/luke"       class="org.apache.solr.handler.admin.LukeRequestHandler" />
-  <requestHandler name="/admin/system"     class="org.apache.solr.handler.admin.SystemInfoHandler" />
-  <requestHandler name="/admin/plugins"    class="org.apache.solr.handler.admin.PluginInfoHandler" />
-  <requestHandler name="/admin/threads"    class="org.apache.solr.handler.admin.ThreadDumpHandler" />
-  <requestHandler name="/admin/properties" class="org.apache.solr.handler.admin.PropertiesRequestHandler" />
-  
-  <!-- Echo the request contents back to the client -->
-  <requestHandler name="/debug/dump" class="solr.DumpRequestHandler" >
-    <lst name="defaults">
-     <str name="echoParams">explicit</str> <!-- for all params (including the default etc) use: 'all' -->
-     <str name="echoHandler">true</str>
-    </lst>
-  </requestHandler>
-  
-  <!-- queryResponseWriter plugins... query responses will be written using the
-    writer specified by the 'wt' request parameter matching the name of a registered
-    writer.
-    The "standard" writer is the default and will be used if 'wt' is not specified 
-    in the request. XMLResponseWriter will be used if nothing is specified here.
-    The json, python, and ruby writers are also available by default.
-
-    <queryResponseWriter name="standard" class="org.apache.solr.request.XMLResponseWriter"/>
-    <queryResponseWriter name="json" class="org.apache.solr.request.JSONResponseWriter"/>
-    <queryResponseWriter name="python" class="org.apache.solr.request.PythonResponseWriter"/>
-    <queryResponseWriter name="ruby" class="org.apache.solr.request.RubyResponseWriter"/>
-
-    <queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
-  -->
-
-  <!-- XSLT response writer transforms the XML output by any xslt file found
-       in Solr's conf/xslt directory.  Changes to xslt files are checked for
-       every xsltCacheLifetimeSeconds.  
-   -->
-  <queryResponseWriter name="xslt" class="org.apache.solr.request.XSLTResponseWriter">
-    <int name="xsltCacheLifetimeSeconds">5</int>
-  </queryResponseWriter> 
-    
-  <!-- config for the admin interface --> 
-  <admin>
-    <defaultQuery>solr</defaultQuery>
-    <gettableFiles>solrconfig.xml schema.xml admin-extra.html</gettableFiles>
-    <!-- pingQuery should be "URLish" ...
-         &amp; separated key=val pairs ... but there shouldn't be any
-         URL escaping of the values -->
-    <pingQuery>
-     qt=standard&amp;q=solrpingquery
-    </pingQuery>
-    <!-- configure a healthcheck file for servers behind a loadbalancer
-    <healthcheck type="file">server-enabled</healthcheck>
-    -->
-  </admin>
-
-</config>