we_bridge_rails_engine_nations 0.1.0

data/spec/controllers/regions_controller_spec.rb

@@ -0,0 +1,169 @@
+require 'rails_helper'
+
+# This spec was generated by rspec-rails when you ran the scaffold generator.
+# It demonstrates how one might use RSpec to specify the controller code that
+# was generated by Rails when you ran the scaffold generator.
+#
+# It assumes that the implementation code is generated by the rails scaffold
+# generator.  If you are using any extension libraries to generate different
+# controller code, this generated spec may or may not pass.
+#
+# It only uses APIs available in rails and/or rspec-rails.  There are a number
+# of tools you can use to make these specs even more expressive, but we're
+# sticking to rails and rspec-rails APIs to keep things simple and stable.
+#
+# Compared to earlier versions of this generator, there is very limited use of
+# stubs and message expectations in this spec.  Stubs are only used when there
+# is no simpler way to get a handle on the object needed for the example.
+# Message expectations are only used when there is no simpler way to specify
+# that an instance is receiving a specific message.
+
+RSpec.describe RegionsController, type: :controller do
+
+  # This should return the minimal set of attributes required to create a valid
+  # Region. As you add validations to Region, be sure to
+  # adjust the attributes here as well.
+  let(:valid_attributes) {
+    {name: "East Asia"}
+  }
+
+  let(:invalid_attributes) {
+    {name: ""}
+  }
+
+  # This should return the minimal set of values that should be in the session
+  # in order to pass any filters (e.g. authentication) defined in
+  # RegionsController. Be sure to keep this updated too.
+  let(:valid_session) { {} }
+
+  describe "GET #index" do
+    it "assigns all regions as @regions" do
+      region = Region.create! valid_attributes
+      get :index, {}, valid_session
+      expect(assigns(:records)).to eq([region])
+    end
+  end
+
+  describe "GET #show" do
+    it "assigns the requested region as @region" do
+      region = Region.create! valid_attributes
+      get :show, {:id => region.to_param}, valid_session
+      expect(assigns(:record)).to eq(region)
+    end
+  end
+
+  describe "GET #new" do
+    it "assigns a new region as @region" do
+      get :new, {}, valid_session
+      expect(assigns(:record)).to be_a_new(Region)
+    end
+  end
+
+  describe "GET #edit" do
+    it "assigns the requested region as @region" do
+      region = Region.create! valid_attributes
+      get :edit, {:id => region.to_param}, valid_session
+      expect(assigns(:record)).to eq(region)
+    end
+  end
+
+  describe "POST #create" do
+    context "with valid params" do
+      it "creates a new Region" do
+        expect {
+          post :create, {:regions => valid_attributes}, valid_session
+        }.to change(Region, :count).by(1)
+      end
+
+      it "assigns a newly created region as @region" do
+        post :create, {:regions => valid_attributes}, valid_session
+        expect(assigns(:record)).to be_a(Region)
+        expect(assigns(:record)).to be_persisted
+      end
+
+      it "redirects to the created region" do
+        post :create, {:regions => valid_attributes}, valid_session
+        expect(response).to redirect_to(Region.last)
+      end
+    end
+
+    context "with invalid params" do
+      it "assigns a newly created but unsaved region as @region" do
+        post :create, {:regions => invalid_attributes}, valid_session
+        expect(assigns(:record)).to be_a_new(Region)
+      end
+
+      pending do
+      it "re-renders the 'new' template" do
+        post :create, {:regions => invalid_attributes}, valid_session
+        expect(response).to render_template("new")
+      end
+      end
+    end
+  end
+
+  describe "PUT #update" do
+    context "with valid params" do
+      let(:new_attributes) {
+        skip("Add a hash of attributes valid for your model")
+      }
+
+      it "updates the requested region" do
+        region = Region.create! valid_attributes
+        put :update, {:id => region.to_param, :regions => new_attributes}, valid_session
+        region.reload
+        skip("Add assertions for updated state")
+      end
+
+      it "assigns the requested region as @region" do
+        region = Region.create! valid_attributes
+        put :update, {:id => region.to_param, :regions => valid_attributes}, valid_session
+        expect(assigns(:record)).to eq(region)
+      end
+
+      pending do
+      it "redirects to the region" do
+        region = Region.create! valid_attributes
+        put :update, {:id => region.to_param, :regions => valid_attributes}, valid_session
+        expect(response).to redirect_to(region)
+      end
+      end
+    end
+
+    context "with invalid params" do
+      it "assigns the region as @region" do
+        region = Region.create! valid_attributes
+        put :update, {:id => region.to_param, :regions => invalid_attributes}, valid_session
+        expect(assigns(:record)).to eq(region)
+      end
+
+      pending do
+      it "re-renders the 'edit' template" do
+        region = Region.create! valid_attributes
+        put :update, {:id => region.to_param, :regions => invalid_attributes}, valid_session
+        expect(response).to render_template("edit")
+      end
+      end
+    end
+  end
+
+  describe "DELETE #destroy" do
+    pending do
+    it "destroys the requested region" do
+      region = Region.create! valid_attributes
+      expect {
+        delete :destroy, {:id => region.to_param}, valid_session
+      }.to change(Region, :count).by(-1)
+    end
+    end
+
+    pending do
+    it "redirects to the regions list" do
+      region = Region.create! valid_attributes
+      delete :destroy, {:id => region.to_param}, valid_session
+      expect(response).to redirect_to(regions_url)
+    end
+    end
+  end
+
+end

data/spec/dummy/README.rdoc

@@ -0,0 +1,28 @@
+== README
+
+This README would normally document whatever steps are necessary to get the
+application up and running.
+
+Things you may want to cover:
+
+* Ruby version
+
+* System dependencies
+
+* Configuration
+
+* Database creation
+
+* Database initialization
+
+* How to run the test suite
+
+* Services (job queues, cache servers, search engines, etc.)
+
+* Deployment instructions
+
+* ...
+
+
+Please feel free to use a different markup language if you do not plan to run
+<tt>rake doc:app</tt>.

data/spec/dummy/Rakefile

@@ -0,0 +1,6 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Rails.application.load_tasks

data/spec/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,16 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or any plugin's vendor/assets/javascripts directory can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// compiled file.
+//
+// Read Sprockets README (https://github.com/rails/sprockets#sprockets-directives) for details
+// about supported directives.
+//
+//= require jquery
+//= require jquery_ujs
+// require turbolinks
+//= require_tree .

data/spec/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,15 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or any plugin's vendor/assets/stylesheets directory can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the bottom of the
+ * compiled file so the styles you add here take precedence over styles defined in any styles
+ * defined in the other CSS/SCSS files in this directory. It is generally better to create a new
+ * file per style scope.
+ *
+ *= require_tree .
+ *= require_self
+ */

data/spec/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,8 @@
+require 'we_bridge/exceptions'
+class ApplicationController < ActionController::Base
+  # Prevent CSRF attacks by raising an exception.
+  # For APIs, you may want to use :null_session instead.
+  protect_from_forgery with: :exception
+  include WeBridgeRailsEngineUsers::ApplicationController
+  include WeBridge::Exceptions
+end

data/spec/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/spec/dummy/app/views/layouts/application.html.builder

@@ -0,0 +1,14 @@
+markup do |m|
+  m << "<!DOCTYPE html>"
+  m.html do
+    m.head do
+      m.title "Dummy"
+      m << stylesheet_link_tag('application', media: 'all', 'data-turbolinks-track' => true)
+      m << javascript_include_tag('application', 'data-turbolinks-track' => true )
+      m << csrf_meta_tags
+    end
+    m.body do
+      m << yield
+    end
+  end
+end

data/spec/dummy/bin/bundle

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+load Gem.bin_path('bundler', 'bundle')

data/spec/dummy/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../../config/application', __FILE__)
+require_relative '../config/boot'
+require 'rails/commands'

data/spec/dummy/bin/rake

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/spec/dummy/bin/setup

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+require 'pathname'
+
+# path to your application root.
+APP_ROOT = Pathname.new File.expand_path('../../',  __FILE__)
+
+Dir.chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file:
+
+  puts "== Installing dependencies =="
+  system "gem install bundler --conservative"
+  system "bundle check || bundle install"
+
+  # puts "\n== Copying sample files =="
+  # unless File.exist?("config/database.yml")
+  #   system "cp config/database.yml.sample config/database.yml"
+  # end
+
+  puts "\n== Preparing database =="
+  system "bin/rake db:setup"
+
+  puts "\n== Removing old logs and tempfiles =="
+  system "rm -f log/*"
+  system "rm -rf tmp/cache"
+
+  puts "\n== Restarting application server =="
+  system "touch tmp/restart.txt"
+end

data/spec/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment', __FILE__)
+run Rails.application

data/spec/dummy/config/application.rb

@@ -0,0 +1,28 @@
+require File.expand_path('../boot', __FILE__)
+
+require 'rails/all'
+
+Bundler.require(*Rails.groups)
+require "we_bridge_rails_engine_nations"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+
+    # Do not swallow errors in after_commit/after_rollback callbacks.
+    config.active_record.raise_in_transactional_callbacks = true
+  end
+end
+
+# require 'we_bridge/html_builder'
+# WeBridge::HtmlBuilder.register_template_handler

data/spec/dummy/config/boot.rb

@@ -0,0 +1,5 @@
+# Set up gems listed in the Gemfile.
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
+
+require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
+$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/spec/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: 5
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

data/spec/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,41 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,79 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end