wasmtime 25.0.0 → 25.0.2

data/ext/cargo-vendor/tokio-1.40.0/src/runtime/scheduler/multi_thread/worker.rs

@@ -0,0 +1,1261 @@
+//! A scheduler is initialized with a fixed number of workers. Each worker is
+//! driven by a thread. Each worker has a "core" which contains data such as the
+//! run queue and other state. When `block_in_place` is called, the worker's
+//! "core" is handed off to a new thread allowing the scheduler to continue to
+//! make progress while the originating thread blocks.
+//!
+//! # Shutdown
+//!
+//! Shutting down the runtime involves the following steps:
+//!
+//!  1. The Shared::close method is called. This closes the inject queue and
+//!     `OwnedTasks` instance and wakes up all worker threads.
+//!
+//!  2. Each worker thread observes the close signal next time it runs
+//!     Core::maintenance by checking whether the inject queue is closed.
+//!     The `Core::is_shutdown` flag is set to true.
+//!
+//!  3. The worker thread calls `pre_shutdown` in parallel. Here, the worker
+//!     will keep removing tasks from `OwnedTasks` until it is empty. No new
+//!     tasks can be pushed to the `OwnedTasks` during or after this step as it
+//!     was closed in step 1.
+//!
+//!  5. The workers call Shared::shutdown to enter the single-threaded phase of
+//!     shutdown. These calls will push their core to `Shared::shutdown_cores`,
+//!     and the last thread to push its core will finish the shutdown procedure.
+//!
+//!  6. The local run queue of each core is emptied, then the inject queue is
+//!     emptied.
+//!
+//! At this point, shutdown has completed. It is not possible for any of the
+//! collections to contain any tasks at this point, as each collection was
+//! closed first, then emptied afterwards.
+//!
+//! ## Spawns during shutdown
+//!
+//! When spawning tasks during shutdown, there are two cases:
+//!
+//!  * The spawner observes the `OwnedTasks` being open, and the inject queue is
+//!    closed.
+//!  * The spawner observes the `OwnedTasks` being closed and doesn't check the
+//!    inject queue.
+//!
+//! The first case can only happen if the `OwnedTasks::bind` call happens before
+//! or during step 1 of shutdown. In this case, the runtime will clean up the
+//! task in step 3 of shutdown.
+//!
+//! In the latter case, the task was not spawned and the task is immediately
+//! cancelled by the spawner.
+//!
+//! The correctness of shutdown requires both the inject queue and `OwnedTasks`
+//! collection to have a closed bit. With a close bit on only the inject queue,
+//! spawning could run in to a situation where a task is successfully bound long
+//! after the runtime has shut down. With a close bit on only the `OwnedTasks`,
+//! the first spawning situation could result in the notification being pushed
+//! to the inject queue after step 6 of shutdown, which would leave a task in
+//! the inject queue indefinitely. This would be a ref-count cycle and a memory
+//! leak.
+
+use crate::loom::sync::{Arc, Mutex};
+use crate::runtime;
+use crate::runtime::scheduler::multi_thread::{
+    idle, queue, Counters, Handle, Idle, Overflow, Parker, Stats, TraceStatus, Unparker,
+};
+use crate::runtime::scheduler::{inject, Defer, Lock};
+use crate::runtime::task::{OwnedTasks, TaskHarnessScheduleHooks};
+use crate::runtime::{
+    blocking, coop, driver, scheduler, task, Config, SchedulerMetrics, WorkerMetrics,
+};
+use crate::runtime::{context, TaskHooks};
+use crate::util::atomic_cell::AtomicCell;
+use crate::util::rand::{FastRand, RngSeedGenerator};
+
+use std::cell::RefCell;
+use std::task::Waker;
+use std::thread;
+use std::time::Duration;
+
+cfg_unstable_metrics! {
+    mod metrics;
+}
+
+cfg_taskdump! {
+    mod taskdump;
+}
+
+cfg_not_taskdump! {
+    mod taskdump_mock;
+}
+
+/// A scheduler worker
+pub(super) struct Worker {
+    /// Reference to scheduler's handle
+    handle: Arc<Handle>,
+
+    /// Index holding this worker's remote state
+    index: usize,
+
+    /// Used to hand-off a worker's core to another thread.
+    core: AtomicCell<Core>,
+}
+
+/// Core data
+struct Core {
+    /// Used to schedule bookkeeping tasks every so often.
+    tick: u32,
+
+    /// When a task is scheduled from a worker, it is stored in this slot. The
+    /// worker will check this slot for a task **before** checking the run
+    /// queue. This effectively results in the **last** scheduled task to be run
+    /// next (LIFO). This is an optimization for improving locality which
+    /// benefits message passing patterns and helps to reduce latency.
+    lifo_slot: Option<Notified>,
+
+    /// When `true`, locally scheduled tasks go to the LIFO slot. When `false`,
+    /// they go to the back of the `run_queue`.
+    lifo_enabled: bool,
+
+    /// The worker-local run queue.
+    run_queue: queue::Local<Arc<Handle>>,
+
+    /// True if the worker is currently searching for more work. Searching
+    /// involves attempting to steal from other workers.
+    is_searching: bool,
+
+    /// True if the scheduler is being shutdown
+    is_shutdown: bool,
+
+    /// True if the scheduler is being traced
+    is_traced: bool,
+
+    /// Parker
+    ///
+    /// Stored in an `Option` as the parker is added / removed to make the
+    /// borrow checker happy.
+    park: Option<Parker>,
+
+    /// Per-worker runtime stats
+    stats: Stats,
+
+    /// How often to check the global queue
+    global_queue_interval: u32,
+
+    /// Fast random number generator.
+    rand: FastRand,
+}
+
+/// State shared across all workers
+pub(crate) struct Shared {
+    /// Per-worker remote state. All other workers have access to this and is
+    /// how they communicate between each other.
+    remotes: Box<[Remote]>,
+
+    /// Global task queue used for:
+    ///  1. Submit work to the scheduler while **not** currently on a worker thread.
+    ///  2. Submit work to the scheduler when a worker run queue is saturated
+    pub(super) inject: inject::Shared<Arc<Handle>>,
+
+    /// Coordinates idle workers
+    idle: Idle,
+
+    /// Collection of all active tasks spawned onto this executor.
+    pub(crate) owned: OwnedTasks<Arc<Handle>>,
+
+    /// Data synchronized by the scheduler mutex
+    pub(super) synced: Mutex<Synced>,
+
+    /// Cores that have observed the shutdown signal
+    ///
+    /// The core is **not** placed back in the worker to avoid it from being
+    /// stolen by a thread that was spawned as part of `block_in_place`.
+    #[allow(clippy::vec_box)] // we're moving an already-boxed value
+    shutdown_cores: Mutex<Vec<Box<Core>>>,
+
+    /// The number of cores that have observed the trace signal.
+    pub(super) trace_status: TraceStatus,
+
+    /// Scheduler configuration options
+    config: Config,
+
+    /// Collects metrics from the runtime.
+    pub(super) scheduler_metrics: SchedulerMetrics,
+
+    pub(super) worker_metrics: Box<[WorkerMetrics]>,
+
+    /// Only held to trigger some code on drop. This is used to get internal
+    /// runtime metrics that can be useful when doing performance
+    /// investigations. This does nothing (empty struct, no drop impl) unless
+    /// the `tokio_internal_mt_counters` `cfg` flag is set.
+    _counters: Counters,
+}
+
+/// Data synchronized by the scheduler mutex
+pub(crate) struct Synced {
+    /// Synchronized state for `Idle`.
+    pub(super) idle: idle::Synced,
+
+    /// Synchronized state for `Inject`.
+    pub(crate) inject: inject::Synced,
+}
+
+/// Used to communicate with a worker from other threads.
+struct Remote {
+    /// Steals tasks from this worker.
+    pub(super) steal: queue::Steal<Arc<Handle>>,
+
+    /// Unparks the associated worker thread
+    unpark: Unparker,
+}
+
+/// Thread-local context
+pub(crate) struct Context {
+    /// Worker
+    worker: Arc<Worker>,
+
+    /// Core data
+    core: RefCell<Option<Box<Core>>>,
+
+    /// Tasks to wake after resource drivers are polled. This is mostly to
+    /// handle yielded tasks.
+    pub(crate) defer: Defer,
+}
+
+/// Starts the workers
+pub(crate) struct Launch(Vec<Arc<Worker>>);
+
+/// Running a task may consume the core. If the core is still available when
+/// running the task completes, it is returned. Otherwise, the worker will need
+/// to stop processing.
+type RunResult = Result<Box<Core>, ()>;
+
+/// A task handle
+type Task = task::Task<Arc<Handle>>;
+
+/// A notified task handle
+type Notified = task::Notified<Arc<Handle>>;
+
+/// Value picked out of thin-air. Running the LIFO slot a handful of times
+/// seems sufficient to benefit from locality. More than 3 times probably is
+/// overweighing. The value can be tuned in the future with data that shows
+/// improvements.
+const MAX_LIFO_POLLS_PER_TICK: usize = 3;
+
+pub(super) fn create(
+    size: usize,
+    park: Parker,
+    driver_handle: driver::Handle,
+    blocking_spawner: blocking::Spawner,
+    seed_generator: RngSeedGenerator,
+    config: Config,
+) -> (Arc<Handle>, Launch) {
+    let mut cores = Vec::with_capacity(size);
+    let mut remotes = Vec::with_capacity(size);
+    let mut worker_metrics = Vec::with_capacity(size);
+
+    // Create the local queues
+    for _ in 0..size {
+        let (steal, run_queue) = queue::local();
+
+        let park = park.clone();
+        let unpark = park.unpark();
+        let metrics = WorkerMetrics::from_config(&config);
+        let stats = Stats::new(&metrics);
+
+        cores.push(Box::new(Core {
+            tick: 0,
+            lifo_slot: None,
+            lifo_enabled: !config.disable_lifo_slot,
+            run_queue,
+            is_searching: false,
+            is_shutdown: false,
+            is_traced: false,
+            park: Some(park),
+            global_queue_interval: stats.tuned_global_queue_interval(&config),
+            stats,
+            rand: FastRand::from_seed(config.seed_generator.next_seed()),
+        }));
+
+        remotes.push(Remote { steal, unpark });
+        worker_metrics.push(metrics);
+    }
+
+    let (idle, idle_synced) = Idle::new(size);
+    let (inject, inject_synced) = inject::Shared::new();
+
+    let remotes_len = remotes.len();
+    let handle = Arc::new(Handle {
+        task_hooks: TaskHooks {
+            task_spawn_callback: config.before_spawn.clone(),
+            task_terminate_callback: config.after_termination.clone(),
+        },
+        shared: Shared {
+            remotes: remotes.into_boxed_slice(),
+            inject,
+            idle,
+            owned: OwnedTasks::new(size),
+            synced: Mutex::new(Synced {
+                idle: idle_synced,
+                inject: inject_synced,
+            }),
+            shutdown_cores: Mutex::new(vec![]),
+            trace_status: TraceStatus::new(remotes_len),
+            config,
+            scheduler_metrics: SchedulerMetrics::new(),
+            worker_metrics: worker_metrics.into_boxed_slice(),
+            _counters: Counters,
+        },
+        driver: driver_handle,
+        blocking_spawner,
+        seed_generator,
+    });
+
+    let mut launch = Launch(vec![]);
+
+    for (index, core) in cores.drain(..).enumerate() {
+        launch.0.push(Arc::new(Worker {
+            handle: handle.clone(),
+            index,
+            core: AtomicCell::new(Some(core)),
+        }));
+    }
+
+    (handle, launch)
+}
+
+#[track_caller]
+pub(crate) fn block_in_place<F, R>(f: F) -> R
+where
+    F: FnOnce() -> R,
+{
+    // Try to steal the worker core back
+    struct Reset {
+        take_core: bool,
+        budget: coop::Budget,
+    }
+
+    impl Drop for Reset {
+        fn drop(&mut self) {
+            with_current(|maybe_cx| {
+                if let Some(cx) = maybe_cx {
+                    if self.take_core {
+                        let core = cx.worker.core.take();
+
+                        if core.is_some() {
+                            cx.worker.handle.shared.worker_metrics[cx.worker.index]
+                                .set_thread_id(thread::current().id());
+                        }
+
+                        let mut cx_core = cx.core.borrow_mut();
+                        assert!(cx_core.is_none());
+                        *cx_core = core;
+                    }
+
+                    // Reset the task budget as we are re-entering the
+                    // runtime.
+                    coop::set(self.budget);
+                }
+            });
+        }
+    }
+
+    let mut had_entered = false;
+    let mut take_core = false;
+
+    let setup_result = with_current(|maybe_cx| {
+        match (
+            crate::runtime::context::current_enter_context(),
+            maybe_cx.is_some(),
+        ) {
+            (context::EnterRuntime::Entered { .. }, true) => {
+                // We are on a thread pool runtime thread, so we just need to
+                // set up blocking.
+                had_entered = true;
+            }
+            (
+                context::EnterRuntime::Entered {
+                    allow_block_in_place,
+                },
+                false,
+            ) => {
+                // We are on an executor, but _not_ on the thread pool.  That is
+                // _only_ okay if we are in a thread pool runtime's block_on
+                // method:
+                if allow_block_in_place {
+                    had_entered = true;
+                    return Ok(());
+                } else {
+                    // This probably means we are on the current_thread runtime or in a
+                    // LocalSet, where it is _not_ okay to block.
+                    return Err(
+                        "can call blocking only when running on the multi-threaded runtime",
+                    );
+                }
+            }
+            (context::EnterRuntime::NotEntered, true) => {
+                // This is a nested call to block_in_place (we already exited).
+                // All the necessary setup has already been done.
+                return Ok(());
+            }
+            (context::EnterRuntime::NotEntered, false) => {
+                // We are outside of the tokio runtime, so blocking is fine.
+                // We can also skip all of the thread pool blocking setup steps.
+                return Ok(());
+            }
+        }
+
+        let cx = maybe_cx.expect("no .is_some() == false cases above should lead here");
+
+        // Get the worker core. If none is set, then blocking is fine!
+        let mut core = match cx.core.borrow_mut().take() {
+            Some(core) => core,
+            None => return Ok(()),
+        };
+
+        // If we heavily call `spawn_blocking`, there might be no available thread to
+        // run this core. Except for the task in the lifo_slot, all tasks can be
+        // stolen, so we move the task out of the lifo_slot to the run_queue.
+        if let Some(task) = core.lifo_slot.take() {
+            core.run_queue
+                .push_back_or_overflow(task, &*cx.worker.handle, &mut core.stats);
+        }
+
+        // We are taking the core from the context and sending it to another
+        // thread.
+        take_core = true;
+
+        // The parker should be set here
+        assert!(core.park.is_some());
+
+        // In order to block, the core must be sent to another thread for
+        // execution.
+        //
+        // First, move the core back into the worker's shared core slot.
+        cx.worker.core.set(core);
+
+        // Next, clone the worker handle and send it to a new thread for
+        // processing.
+        //
+        // Once the blocking task is done executing, we will attempt to
+        // steal the core back.
+        let worker = cx.worker.clone();
+        runtime::spawn_blocking(move || run(worker));
+        Ok(())
+    });
+
+    if let Err(panic_message) = setup_result {
+        panic!("{}", panic_message);
+    }
+
+    if had_entered {
+        // Unset the current task's budget. Blocking sections are not
+        // constrained by task budgets.
+        let _reset = Reset {
+            take_core,
+            budget: coop::stop(),
+        };
+
+        crate::runtime::context::exit_runtime(f)
+    } else {
+        f()
+    }
+}
+
+impl Launch {
+    pub(crate) fn launch(mut self) {
+        for worker in self.0.drain(..) {
+            runtime::spawn_blocking(move || run(worker));
+        }
+    }
+}
+
+fn run(worker: Arc<Worker>) {
+    #[allow(dead_code)]
+    struct AbortOnPanic;
+
+    impl Drop for AbortOnPanic {
+        fn drop(&mut self) {
+            if std::thread::panicking() {
+                eprintln!("worker thread panicking; aborting process");
+                std::process::abort();
+            }
+        }
+    }
+
+    // Catching panics on worker threads in tests is quite tricky. Instead, when
+    // debug assertions are enabled, we just abort the process.
+    #[cfg(debug_assertions)]
+    let _abort_on_panic = AbortOnPanic;
+
+    // Acquire a core. If this fails, then another thread is running this
+    // worker and there is nothing further to do.
+    let core = match worker.core.take() {
+        Some(core) => core,
+        None => return,
+    };
+
+    worker.handle.shared.worker_metrics[worker.index].set_thread_id(thread::current().id());
+
+    let handle = scheduler::Handle::MultiThread(worker.handle.clone());
+
+    crate::runtime::context::enter_runtime(&handle, true, |_| {
+        // Set the worker context.
+        let cx = scheduler::Context::MultiThread(Context {
+            worker,
+            core: RefCell::new(None),
+            defer: Defer::new(),
+        });
+
+        context::set_scheduler(&cx, || {
+            let cx = cx.expect_multi_thread();
+
+            // This should always be an error. It only returns a `Result` to support
+            // using `?` to short circuit.
+            assert!(cx.run(core).is_err());
+
+            // Check if there are any deferred tasks to notify. This can happen when
+            // the worker core is lost due to `block_in_place()` being called from
+            // within the task.
+            cx.defer.wake();
+        });
+    });
+}
+
+impl Context {
+    fn run(&self, mut core: Box<Core>) -> RunResult {
+        // Reset `lifo_enabled` here in case the core was previously stolen from
+        // a task that had the LIFO slot disabled.
+        self.reset_lifo_enabled(&mut core);
+
+        // Start as "processing" tasks as polling tasks from the local queue
+        // will be one of the first things we do.
+        core.stats.start_processing_scheduled_tasks();
+
+        while !core.is_shutdown {
+            self.assert_lifo_enabled_is_correct(&core);
+
+            if core.is_traced {
+                core = self.worker.handle.trace_core(core);
+            }
+
+            // Increment the tick
+            core.tick();
+
+            // Run maintenance, if needed
+            core = self.maintenance(core);
+
+            // First, check work available to the current worker.
+            if let Some(task) = core.next_task(&self.worker) {
+                core = self.run_task(task, core)?;
+                continue;
+            }
+
+            // We consumed all work in the queues and will start searching for work.
+            core.stats.end_processing_scheduled_tasks();
+
+            // There is no more **local** work to process, try to steal work
+            // from other workers.
+            if let Some(task) = core.steal_work(&self.worker) {
+                // Found work, switch back to processing
+                core.stats.start_processing_scheduled_tasks();
+                core = self.run_task(task, core)?;
+            } else {
+                // Wait for work
+                core = if !self.defer.is_empty() {
+                    self.park_timeout(core, Some(Duration::from_millis(0)))
+                } else {
+                    self.park(core)
+                };
+                core.stats.start_processing_scheduled_tasks();
+            }
+        }
+
+        core.pre_shutdown(&self.worker);
+        // Signal shutdown
+        self.worker.handle.shutdown_core(core);
+        Err(())
+    }
+
+    fn run_task(&self, task: Notified, mut core: Box<Core>) -> RunResult {
+        let task = self.worker.handle.shared.owned.assert_owner(task);
+
+        // Make sure the worker is not in the **searching** state. This enables
+        // another idle worker to try to steal work.
+        core.transition_from_searching(&self.worker);
+
+        self.assert_lifo_enabled_is_correct(&core);
+
+        // Measure the poll start time. Note that we may end up polling other
+        // tasks under this measurement. In this case, the tasks came from the
+        // LIFO slot and are considered part of the current task for scheduling
+        // purposes. These tasks inherent the "parent"'s limits.
+        core.stats.start_poll();
+
+        // Make the core available to the runtime context
+        *self.core.borrow_mut() = Some(core);
+
+        // Run the task
+        coop::budget(|| {
+            task.run();
+            let mut lifo_polls = 0;
+
+            // As long as there is budget remaining and a task exists in the
+            // `lifo_slot`, then keep running.
+            loop {
+                // Check if we still have the core. If not, the core was stolen
+                // by another worker.
+                let mut core = match self.core.borrow_mut().take() {
+                    Some(core) => core,
+                    None => {
+                        // In this case, we cannot call `reset_lifo_enabled()`
+                        // because the core was stolen. The stealer will handle
+                        // that at the top of `Context::run`
+                        return Err(());
+                    }
+                };
+
+                // Check for a task in the LIFO slot
+                let task = match core.lifo_slot.take() {
+                    Some(task) => task,
+                    None => {
+                        self.reset_lifo_enabled(&mut core);
+                        core.stats.end_poll();
+                        return Ok(core);
+                    }
+                };
+
+                if !coop::has_budget_remaining() {
+                    core.stats.end_poll();
+
+                    // Not enough budget left to run the LIFO task, push it to
+                    // the back of the queue and return.
+                    core.run_queue.push_back_or_overflow(
+                        task,
+                        &*self.worker.handle,
+                        &mut core.stats,
+                    );
+                    // If we hit this point, the LIFO slot should be enabled.
+                    // There is no need to reset it.
+                    debug_assert!(core.lifo_enabled);
+                    return Ok(core);
+                }
+
+                // Track that we are about to run a task from the LIFO slot.
+                lifo_polls += 1;
+                super::counters::inc_lifo_schedules();
+
+                // Disable the LIFO slot if we reach our limit
+                //
+                // In ping-ping style workloads where task A notifies task B,
+                // which notifies task A again, continuously prioritizing the
+                // LIFO slot can cause starvation as these two tasks will
+                // repeatedly schedule the other. To mitigate this, we limit the
+                // number of times the LIFO slot is prioritized.
+                if lifo_polls >= MAX_LIFO_POLLS_PER_TICK {
+                    core.lifo_enabled = false;
+                    super::counters::inc_lifo_capped();
+                }
+
+                // Run the LIFO task, then loop
+                *self.core.borrow_mut() = Some(core);
+                let task = self.worker.handle.shared.owned.assert_owner(task);
+                task.run();
+            }
+        })
+    }
+
+    fn reset_lifo_enabled(&self, core: &mut Core) {
+        core.lifo_enabled = !self.worker.handle.shared.config.disable_lifo_slot;
+    }
+
+    fn assert_lifo_enabled_is_correct(&self, core: &Core) {
+        debug_assert_eq!(
+            core.lifo_enabled,
+            !self.worker.handle.shared.config.disable_lifo_slot
+        );
+    }
+
+    fn maintenance(&self, mut core: Box<Core>) -> Box<Core> {
+        if core.tick % self.worker.handle.shared.config.event_interval == 0 {
+            super::counters::inc_num_maintenance();
+
+            core.stats.end_processing_scheduled_tasks();
+
+            // Call `park` with a 0 timeout. This enables the I/O driver, timer, ...
+            // to run without actually putting the thread to sleep.
+            core = self.park_timeout(core, Some(Duration::from_millis(0)));
+
+            // Run regularly scheduled maintenance
+            core.maintenance(&self.worker);
+
+            core.stats.start_processing_scheduled_tasks();
+        }
+
+        core
+    }
+
+    /// Parks the worker thread while waiting for tasks to execute.
+    ///
+    /// This function checks if indeed there's no more work left to be done before parking.
+    /// Also important to notice that, before parking, the worker thread will try to take
+    /// ownership of the Driver (IO/Time) and dispatch any events that might have fired.
+    /// Whenever a worker thread executes the Driver loop, all waken tasks are scheduled
+    /// in its own local queue until the queue saturates (ntasks > `LOCAL_QUEUE_CAPACITY`).
+    /// When the local queue is saturated, the overflow tasks are added to the injection queue
+    /// from where other workers can pick them up.
+    /// Also, we rely on the workstealing algorithm to spread the tasks amongst workers
+    /// after all the IOs get dispatched
+    fn park(&self, mut core: Box<Core>) -> Box<Core> {
+        if let Some(f) = &self.worker.handle.shared.config.before_park {
+            f();
+        }
+
+        if core.transition_to_parked(&self.worker) {
+            while !core.is_shutdown && !core.is_traced {
+                core.stats.about_to_park();
+                core.stats
+                    .submit(&self.worker.handle.shared.worker_metrics[self.worker.index]);
+
+                core = self.park_timeout(core, None);
+
+                core.stats.unparked();
+
+                // Run regularly scheduled maintenance
+                core.maintenance(&self.worker);
+
+                if core.transition_from_parked(&self.worker) {
+                    break;
+                }
+            }
+        }
+
+        if let Some(f) = &self.worker.handle.shared.config.after_unpark {
+            f();
+        }
+        core
+    }
+
+    fn park_timeout(&self, mut core: Box<Core>, duration: Option<Duration>) -> Box<Core> {
+        self.assert_lifo_enabled_is_correct(&core);
+
+        // Take the parker out of core
+        let mut park = core.park.take().expect("park missing");
+
+        // Store `core` in context
+        *self.core.borrow_mut() = Some(core);
+
+        // Park thread
+        if let Some(timeout) = duration {
+            park.park_timeout(&self.worker.handle.driver, timeout);
+        } else {
+            park.park(&self.worker.handle.driver);
+        }
+
+        self.defer.wake();
+
+        // Remove `core` from context
+        core = self.core.borrow_mut().take().expect("core missing");
+
+        // Place `park` back in `core`
+        core.park = Some(park);
+
+        if core.should_notify_others() {
+            self.worker.handle.notify_parked_local();
+        }
+
+        core
+    }
+
+    pub(crate) fn defer(&self, waker: &Waker) {
+        self.defer.defer(waker);
+    }
+
+    #[allow(dead_code)]
+    pub(crate) fn get_worker_index(&self) -> usize {
+        self.worker.index
+    }
+}
+
+impl Core {
+    /// Increment the tick
+    fn tick(&mut self) {
+        self.tick = self.tick.wrapping_add(1);
+    }
+
+    /// Return the next notified task available to this worker.
+    fn next_task(&mut self, worker: &Worker) -> Option<Notified> {
+        if self.tick % self.global_queue_interval == 0 {
+            // Update the global queue interval, if needed
+            self.tune_global_queue_interval(worker);
+
+            worker
+                .handle
+                .next_remote_task()
+                .or_else(|| self.next_local_task())
+        } else {
+            let maybe_task = self.next_local_task();
+
+            if maybe_task.is_some() {
+                return maybe_task;
+            }
+
+            if worker.inject().is_empty() {
+                return None;
+            }
+
+            // Other threads can only **remove** tasks from the current worker's
+            // `run_queue`. So, we can be confident that by the time we call
+            // `run_queue.push_back` below, there will be *at least* `cap`
+            // available slots in the queue.
+            let cap = usize::min(
+                self.run_queue.remaining_slots(),
+                self.run_queue.max_capacity() / 2,
+            );
+
+            // The worker is currently idle, pull a batch of work from the
+            // injection queue. We don't want to pull *all* the work so other
+            // workers can also get some.
+            let n = usize::min(
+                worker.inject().len() / worker.handle.shared.remotes.len() + 1,
+                cap,
+            );
+
+            // Take at least one task since the first task is returned directly
+            // and not pushed onto the local queue.
+            let n = usize::max(1, n);
+
+            let mut synced = worker.handle.shared.synced.lock();
+            // safety: passing in the correct `inject::Synced`.
+            let mut tasks = unsafe { worker.inject().pop_n(&mut synced.inject, n) };
+
+            // Pop the first task to return immediately
+            let ret = tasks.next();
+
+            // Push the rest of the on the run queue
+            self.run_queue.push_back(tasks);
+
+            ret
+        }
+    }
+
+    fn next_local_task(&mut self) -> Option<Notified> {
+        self.lifo_slot.take().or_else(|| self.run_queue.pop())
+    }
+
+    /// Function responsible for stealing tasks from another worker
+    ///
+    /// Note: Only if less than half the workers are searching for tasks to steal
+    /// a new worker will actually try to steal. The idea is to make sure not all
+    /// workers will be trying to steal at the same time.
+    fn steal_work(&mut self, worker: &Worker) -> Option<Notified> {
+        if !self.transition_to_searching(worker) {
+            return None;
+        }
+
+        let num = worker.handle.shared.remotes.len();
+        // Start from a random worker
+        let start = self.rand.fastrand_n(num as u32) as usize;
+
+        for i in 0..num {
+            let i = (start + i) % num;
+
+            // Don't steal from ourself! We know we don't have work.
+            if i == worker.index {
+                continue;
+            }
+
+            let target = &worker.handle.shared.remotes[i];
+            if let Some(task) = target
+                .steal
+                .steal_into(&mut self.run_queue, &mut self.stats)
+            {
+                return Some(task);
+            }
+        }
+
+        // Fallback on checking the global queue
+        worker.handle.next_remote_task()
+    }
+
+    fn transition_to_searching(&mut self, worker: &Worker) -> bool {
+        if !self.is_searching {
+            self.is_searching = worker.handle.shared.idle.transition_worker_to_searching();
+        }
+
+        self.is_searching
+    }
+
+    fn transition_from_searching(&mut self, worker: &Worker) {
+        if !self.is_searching {
+            return;
+        }
+
+        self.is_searching = false;
+        worker.handle.transition_worker_from_searching();
+    }
+
+    fn has_tasks(&self) -> bool {
+        self.lifo_slot.is_some() || self.run_queue.has_tasks()
+    }
+
+    fn should_notify_others(&self) -> bool {
+        // If there are tasks available to steal, but this worker is not
+        // looking for tasks to steal, notify another worker.
+        if self.is_searching {
+            return false;
+        }
+        self.lifo_slot.is_some() as usize + self.run_queue.len() > 1
+    }
+
+    /// Prepares the worker state for parking.
+    ///
+    /// Returns true if the transition happened, false if there is work to do first.
+    fn transition_to_parked(&mut self, worker: &Worker) -> bool {
+        // Workers should not park if they have work to do
+        if self.has_tasks() || self.is_traced {
+            return false;
+        }
+
+        // When the final worker transitions **out** of searching to parked, it
+        // must check all the queues one last time in case work materialized
+        // between the last work scan and transitioning out of searching.
+        let is_last_searcher = worker.handle.shared.idle.transition_worker_to_parked(
+            &worker.handle.shared,
+            worker.index,
+            self.is_searching,
+        );
+
+        // The worker is no longer searching. Setting this is the local cache
+        // only.
+        self.is_searching = false;
+
+        if is_last_searcher {
+            worker.handle.notify_if_work_pending();
+        }
+
+        true
+    }
+
+    /// Returns `true` if the transition happened.
+    fn transition_from_parked(&mut self, worker: &Worker) -> bool {
+        // If a task is in the lifo slot/run queue, then we must unpark regardless of
+        // being notified
+        if self.has_tasks() {
+            // When a worker wakes, it should only transition to the "searching"
+            // state when the wake originates from another worker *or* a new task
+            // is pushed. We do *not* want the worker to transition to "searching"
+            // when it wakes when the I/O driver receives new events.
+            self.is_searching = !worker
+                .handle
+                .shared
+                .idle
+                .unpark_worker_by_id(&worker.handle.shared, worker.index);
+            return true;
+        }
+
+        if worker
+            .handle
+            .shared
+            .idle
+            .is_parked(&worker.handle.shared, worker.index)
+        {
+            return false;
+        }
+
+        // When unparked, the worker is in the searching state.
+        self.is_searching = true;
+        true
+    }
+
+    /// Runs maintenance work such as checking the pool's state.
+    fn maintenance(&mut self, worker: &Worker) {
+        self.stats
+            .submit(&worker.handle.shared.worker_metrics[worker.index]);
+
+        if !self.is_shutdown {
+            // Check if the scheduler has been shutdown
+            let synced = worker.handle.shared.synced.lock();
+            self.is_shutdown = worker.inject().is_closed(&synced.inject);
+        }
+
+        if !self.is_traced {
+            // Check if the worker should be tracing.
+            self.is_traced = worker.handle.shared.trace_status.trace_requested();
+        }
+    }
+
+    /// Signals all tasks to shut down, and waits for them to complete. Must run
+    /// before we enter the single-threaded phase of shutdown processing.
+    fn pre_shutdown(&mut self, worker: &Worker) {
+        // Start from a random inner list
+        let start = self
+            .rand
+            .fastrand_n(worker.handle.shared.owned.get_shard_size() as u32);
+        // Signal to all tasks to shut down.
+        worker
+            .handle
+            .shared
+            .owned
+            .close_and_shutdown_all(start as usize);
+
+        self.stats
+            .submit(&worker.handle.shared.worker_metrics[worker.index]);
+    }
+
+    /// Shuts down the core.
+    fn shutdown(&mut self, handle: &Handle) {
+        // Take the core
+        let mut park = self.park.take().expect("park missing");
+
+        // Drain the queue
+        while self.next_local_task().is_some() {}
+
+        park.shutdown(&handle.driver);
+    }
+
+    fn tune_global_queue_interval(&mut self, worker: &Worker) {
+        let next = self
+            .stats
+            .tuned_global_queue_interval(&worker.handle.shared.config);
+
+        // Smooth out jitter
+        if u32::abs_diff(self.global_queue_interval, next) > 2 {
+            self.global_queue_interval = next;
+        }
+    }
+}
+
+impl Worker {
+    /// Returns a reference to the scheduler's injection queue.
+    fn inject(&self) -> &inject::Shared<Arc<Handle>> {
+        &self.handle.shared.inject
+    }
+}
+
+// TODO: Move `Handle` impls into handle.rs
+impl task::Schedule for Arc<Handle> {
+    fn release(&self, task: &Task) -> Option<Task> {
+        self.shared.owned.remove(task)
+    }
+
+    fn schedule(&self, task: Notified) {
+        self.schedule_task(task, false);
+    }
+
+    fn hooks(&self) -> TaskHarnessScheduleHooks {
+        TaskHarnessScheduleHooks {
+            task_terminate_callback: self.task_hooks.task_terminate_callback.clone(),
+        }
+    }
+
+    fn yield_now(&self, task: Notified) {
+        self.schedule_task(task, true);
+    }
+}
+
+impl Handle {
+    pub(super) fn schedule_task(&self, task: Notified, is_yield: bool) {
+        with_current(|maybe_cx| {
+            if let Some(cx) = maybe_cx {
+                // Make sure the task is part of the **current** scheduler.
+                if self.ptr_eq(&cx.worker.handle) {
+                    // And the current thread still holds a core
+                    if let Some(core) = cx.core.borrow_mut().as_mut() {
+                        self.schedule_local(core, task, is_yield);
+                        return;
+                    }
+                }
+            }
+
+            // Otherwise, use the inject queue.
+            self.push_remote_task(task);
+            self.notify_parked_remote();
+        });
+    }
+
+    pub(super) fn schedule_option_task_without_yield(&self, task: Option<Notified>) {
+        if let Some(task) = task {
+            self.schedule_task(task, false);
+        }
+    }
+
+    fn schedule_local(&self, core: &mut Core, task: Notified, is_yield: bool) {
+        core.stats.inc_local_schedule_count();
+
+        // Spawning from the worker thread. If scheduling a "yield" then the
+        // task must always be pushed to the back of the queue, enabling other
+        // tasks to be executed. If **not** a yield, then there is more
+        // flexibility and the task may go to the front of the queue.
+        let should_notify = if is_yield || !core.lifo_enabled {
+            core.run_queue
+                .push_back_or_overflow(task, self, &mut core.stats);
+            true
+        } else {
+            // Push to the LIFO slot
+            let prev = core.lifo_slot.take();
+            let ret = prev.is_some();
+
+            if let Some(prev) = prev {
+                core.run_queue
+                    .push_back_or_overflow(prev, self, &mut core.stats);
+            }
+
+            core.lifo_slot = Some(task);
+
+            ret
+        };
+
+        // Only notify if not currently parked. If `park` is `None`, then the
+        // scheduling is from a resource driver. As notifications often come in
+        // batches, the notification is delayed until the park is complete.
+        if should_notify && core.park.is_some() {
+            self.notify_parked_local();
+        }
+    }
+
+    fn next_remote_task(&self) -> Option<Notified> {
+        if self.shared.inject.is_empty() {
+            return None;
+        }
+
+        let mut synced = self.shared.synced.lock();
+        // safety: passing in correct `idle::Synced`
+        unsafe { self.shared.inject.pop(&mut synced.inject) }
+    }
+
+    fn push_remote_task(&self, task: Notified) {
+        self.shared.scheduler_metrics.inc_remote_schedule_count();
+
+        let mut synced = self.shared.synced.lock();
+        // safety: passing in correct `idle::Synced`
+        unsafe {
+            self.shared.inject.push(&mut synced.inject, task);
+        }
+    }
+
+    pub(super) fn close(&self) {
+        if self
+            .shared
+            .inject
+            .close(&mut self.shared.synced.lock().inject)
+        {
+            self.notify_all();
+        }
+    }
+
+    fn notify_parked_local(&self) {
+        super::counters::inc_num_inc_notify_local();
+
+        if let Some(index) = self.shared.idle.worker_to_notify(&self.shared) {
+            super::counters::inc_num_unparks_local();
+            self.shared.remotes[index].unpark.unpark(&self.driver);
+        }
+    }
+
+    fn notify_parked_remote(&self) {
+        if let Some(index) = self.shared.idle.worker_to_notify(&self.shared) {
+            self.shared.remotes[index].unpark.unpark(&self.driver);
+        }
+    }
+
+    pub(super) fn notify_all(&self) {
+        for remote in &self.shared.remotes[..] {
+            remote.unpark.unpark(&self.driver);
+        }
+    }
+
+    fn notify_if_work_pending(&self) {
+        for remote in &self.shared.remotes[..] {
+            if !remote.steal.is_empty() {
+                self.notify_parked_local();
+                return;
+            }
+        }
+
+        if !self.shared.inject.is_empty() {
+            self.notify_parked_local();
+        }
+    }
+
+    fn transition_worker_from_searching(&self) {
+        if self.shared.idle.transition_worker_from_searching() {
+            // We are the final searching worker. Because work was found, we
+            // need to notify another worker.
+            self.notify_parked_local();
+        }
+    }
+
+    /// Signals that a worker has observed the shutdown signal and has replaced
+    /// its core back into its handle.
+    ///
+    /// If all workers have reached this point, the final cleanup is performed.
+    fn shutdown_core(&self, core: Box<Core>) {
+        let mut cores = self.shared.shutdown_cores.lock();
+        cores.push(core);
+
+        if cores.len() != self.shared.remotes.len() {
+            return;
+        }
+
+        debug_assert!(self.shared.owned.is_empty());
+
+        for mut core in cores.drain(..) {
+            core.shutdown(self);
+        }
+
+        // Drain the injection queue
+        //
+        // We already shut down every task, so we can simply drop the tasks.
+        while let Some(task) = self.next_remote_task() {
+            drop(task);
+        }
+    }
+
+    fn ptr_eq(&self, other: &Handle) -> bool {
+        std::ptr::eq(self, other)
+    }
+}
+
+impl Overflow<Arc<Handle>> for Handle {
+    fn push(&self, task: task::Notified<Arc<Handle>>) {
+        self.push_remote_task(task);
+    }
+
+    fn push_batch<I>(&self, iter: I)
+    where
+        I: Iterator<Item = task::Notified<Arc<Handle>>>,
+    {
+        unsafe {
+            self.shared.inject.push_batch(self, iter);
+        }
+    }
+}
+
+pub(crate) struct InjectGuard<'a> {
+    lock: crate::loom::sync::MutexGuard<'a, Synced>,
+}
+
+impl<'a> AsMut<inject::Synced> for InjectGuard<'a> {
+    fn as_mut(&mut self) -> &mut inject::Synced {
+        &mut self.lock.inject
+    }
+}
+
+impl<'a> Lock<inject::Synced> for &'a Handle {
+    type Handle = InjectGuard<'a>;
+
+    fn lock(self) -> Self::Handle {
+        InjectGuard {
+            lock: self.shared.synced.lock(),
+        }
+    }
+}
+
+#[track_caller]
+fn with_current<R>(f: impl FnOnce(Option<&Context>) -> R) -> R {
+    use scheduler::Context::MultiThread;
+
+    context::with_scheduler(|ctx| match ctx {
+        Some(MultiThread(ctx)) => f(Some(ctx)),
+        _ => f(None),
+    })
+}