wasmtime 16.0.0 → 17.0.1

data/ext/cargo-vendor/wasmtime-wasi-17.0.1/wit/deps/sockets/tcp.wit

@@ -0,0 +1,309 @@
+
+interface tcp {
+    use wasi:io/streams@0.2.0.{input-stream, output-stream};
+    use wasi:io/poll@0.2.0.{pollable};
+    use wasi:clocks/monotonic-clock@0.2.0.{duration};
+    use network.{network, error-code, ip-socket-address, ip-address-family};
+
+    enum shutdown-type {
+        /// Similar to `SHUT_RD` in POSIX.
+        receive,
+
+        /// Similar to `SHUT_WR` in POSIX.
+        send,
+
+        /// Similar to `SHUT_RDWR` in POSIX.
+        both,
+    }
+
+
+    /// A TCP socket handle.
+    resource tcp-socket {
+        /// Bind the socket to a specific network on the provided IP address and port.
+        ///
+        /// If the IP address is zero (`0.0.0.0` in IPv4, `::` in IPv6), it is left to the implementation to decide which
+        /// network interface(s) to bind to.
+        /// If the TCP/UDP port is zero, the socket will be bound to a random free port.
+        ///
+        /// Unlike in POSIX, this function is async. This enables interactive WASI hosts to inject permission prompts.
+        ///
+        /// # Typical `start` errors
+        /// - `invalid-argument`:          The `local-address` has the wrong address family. (EAFNOSUPPORT, EFAULT on Windows)
+        /// - `invalid-argument`:          `local-address` is not a unicast address. (EINVAL)
+        /// - `invalid-argument`:          `local-address` is an IPv4-mapped IPv6 address. (EINVAL)
+        /// - `invalid-state`:             The socket is already bound. (EINVAL)
+        ///
+        /// # Typical `finish` errors
+        /// - `address-in-use`:            No ephemeral ports available. (EADDRINUSE, ENOBUFS on Windows)
+        /// - `address-in-use`:            Address is already in use. (EADDRINUSE)
+        /// - `address-not-bindable`:      `local-address` is not an address that the `network` can bind to. (EADDRNOTAVAIL)
+        /// - `not-in-progress`:           A `bind` operation is not in progress.
+        /// - `would-block`:               Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN)
+        /// 
+        /// # Implementors note
+        /// When binding to a non-zero port, this bind operation shouldn't be affected by the TIME_WAIT
+        /// state of a recently closed socket on the same local address. In practice this means that the SO_REUSEADDR 
+        /// socket option should be set implicitly on all platforms, except on Windows where this is the default behavior
+        /// and SO_REUSEADDR performs something different entirely.
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/bind.html>
+        /// - <https://man7.org/linux/man-pages/man2/bind.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-bind>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=bind&sektion=2&format=html>
+        start-bind: func(network: borrow<network>, local-address: ip-socket-address) -> result<_, error-code>;
+        finish-bind: func() -> result<_, error-code>;
+
+        /// Connect to a remote endpoint.
+        ///
+        /// On success:
+        /// - the socket is transitioned into the Connection state
+        /// - a pair of streams is returned that can be used to read & write to the connection
+        ///
+        /// After a failed connection attempt, the only valid action left is to
+        /// `drop` the socket. A single socket can not be used to connect more than once.
+        ///
+        /// # Typical `start` errors
+        /// - `invalid-argument`:          The `remote-address` has the wrong address family. (EAFNOSUPPORT)
+        /// - `invalid-argument`:          `remote-address` is not a unicast address. (EINVAL, ENETUNREACH on Linux, EAFNOSUPPORT on MacOS)
+        /// - `invalid-argument`:          `remote-address` is an IPv4-mapped IPv6 address. (EINVAL, EADDRNOTAVAIL on Illumos)
+        /// - `invalid-argument`:          The IP address in `remote-address` is set to INADDR_ANY (`0.0.0.0` / `::`). (EADDRNOTAVAIL on Windows)
+        /// - `invalid-argument`:          The port in `remote-address` is set to 0. (EADDRNOTAVAIL on Windows)
+        /// - `invalid-argument`:          The socket is already attached to a different network. The `network` passed to `connect` must be identical to the one passed to `bind`.
+        /// - `invalid-state`:             The socket is already in the Connection state. (EISCONN)
+        /// - `invalid-state`:             The socket is already in the Listener state. (EOPNOTSUPP, EINVAL on Windows)
+        ///
+        /// # Typical `finish` errors
+        /// - `timeout`:                   Connection timed out. (ETIMEDOUT)
+        /// - `connection-refused`:        The connection was forcefully rejected. (ECONNREFUSED)
+        /// - `connection-reset`:          The connection was reset. (ECONNRESET)
+        /// - `connection-aborted`:        The connection was aborted. (ECONNABORTED)
+        /// - `remote-unreachable`:        The remote address is not reachable. (EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN, ENONET)
+        /// - `address-in-use`:            Tried to perform an implicit bind, but there were no ephemeral ports available. (EADDRINUSE, EADDRNOTAVAIL on Linux, EAGAIN on BSD)
+        /// - `not-in-progress`:           A `connect` operation is not in progress.
+        /// - `would-block`:               Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/connect.html>
+        /// - <https://man7.org/linux/man-pages/man2/connect.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-connect>
+        /// - <https://man.freebsd.org/cgi/man.cgi?connect>
+        start-connect: func(network: borrow<network>, remote-address: ip-socket-address) -> result<_, error-code>;
+        finish-connect: func() -> result<tuple<input-stream, output-stream>, error-code>;
+
+        /// Start listening for new connections.
+        ///
+        /// Transitions the socket into the Listener state.
+        ///
+        /// Unlike POSIX:
+        /// - this function is async. This enables interactive WASI hosts to inject permission prompts.
+        /// - the socket must already be explicitly bound.
+        ///
+        /// # Typical `start` errors
+        /// - `invalid-state`:             The socket is not bound to any local address. (EDESTADDRREQ)
+        /// - `invalid-state`:             The socket is already in the Connection state. (EISCONN, EINVAL on BSD)
+        /// - `invalid-state`:             The socket is already in the Listener state.
+        ///
+        /// # Typical `finish` errors
+        /// - `address-in-use`:            Tried to perform an implicit bind, but there were no ephemeral ports available. (EADDRINUSE)
+        /// - `not-in-progress`:           A `listen` operation is not in progress.
+        /// - `would-block`:               Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/listen.html>
+        /// - <https://man7.org/linux/man-pages/man2/listen.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-listen>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=listen&sektion=2>
+        start-listen: func() -> result<_, error-code>;
+        finish-listen: func() -> result<_, error-code>;
+
+        /// Accept a new client socket.
+        ///
+        /// The returned socket is bound and in the Connection state. The following properties are inherited from the listener socket:
+        /// - `address-family`
+        /// - `keep-alive-enabled`
+        /// - `keep-alive-idle-time`
+        /// - `keep-alive-interval`
+        /// - `keep-alive-count`
+        /// - `hop-limit`
+        /// - `receive-buffer-size`
+        /// - `send-buffer-size`
+        ///
+        /// On success, this function returns the newly accepted client socket along with
+        /// a pair of streams that can be used to read & write to the connection.
+        ///
+        /// # Typical errors
+        /// - `invalid-state`:      Socket is not in the Listener state. (EINVAL)
+        /// - `would-block`:        No pending connections at the moment. (EWOULDBLOCK, EAGAIN)
+        /// - `connection-aborted`: An incoming connection was pending, but was terminated by the client before this listener could accept it. (ECONNABORTED)
+        /// - `new-socket-limit`:   The new socket resource could not be created because of a system limit. (EMFILE, ENFILE)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/accept.html>
+        /// - <https://man7.org/linux/man-pages/man2/accept.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-accept>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=accept&sektion=2>
+        accept: func() -> result<tuple<tcp-socket, input-stream, output-stream>, error-code>;
+
+        /// Get the bound local address.
+        ///
+        /// POSIX mentions:
+        /// > If the socket has not been bound to a local name, the value
+        /// > stored in the object pointed to by `address` is unspecified.
+        ///
+        /// WASI is stricter and requires `local-address` to return `invalid-state` when the socket hasn't been bound yet.
+        ///
+        /// # Typical errors
+        /// - `invalid-state`: The socket is not bound to any local address.
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/getsockname.html>
+        /// - <https://man7.org/linux/man-pages/man2/getsockname.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-getsockname>
+        /// - <https://man.freebsd.org/cgi/man.cgi?getsockname>
+        local-address: func() -> result<ip-socket-address, error-code>;
+
+        /// Get the remote address.
+        ///
+        /// # Typical errors
+        /// - `invalid-state`: The socket is not connected to a remote address. (ENOTCONN)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/getpeername.html>
+        /// - <https://man7.org/linux/man-pages/man2/getpeername.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-getpeername>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=getpeername&sektion=2&n=1>
+        remote-address: func() -> result<ip-socket-address, error-code>;
+
+        /// Whether the socket is listening for new connections.
+        ///
+        /// Equivalent to the SO_ACCEPTCONN socket option.
+        is-listening: func() -> bool;
+
+        /// Whether this is a IPv4 or IPv6 socket.
+        ///
+        /// Equivalent to the SO_DOMAIN socket option.
+        address-family: func() -> ip-address-family;
+
+        /// Hints the desired listen queue size. Implementations are free to ignore this.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        /// Any other value will never cause an error, but it might be silently clamped and/or rounded.
+        ///
+        /// # Typical errors
+        /// - `not-supported`:        (set) The platform does not support changing the backlog size after the initial listen.
+        /// - `invalid-argument`:     (set) The provided value was 0.
+        /// - `invalid-state`:        (set) The socket is already in the Connection state.
+        set-listen-backlog-size: func(value: u64) -> result<_, error-code>;
+
+        /// Enables or disables keepalive.
+        ///
+        /// The keepalive behavior can be adjusted using:
+        /// - `keep-alive-idle-time`
+        /// - `keep-alive-interval`
+        /// - `keep-alive-count`
+        /// These properties can be configured while `keep-alive-enabled` is false, but only come into effect when `keep-alive-enabled` is true.
+        ///
+        /// Equivalent to the SO_KEEPALIVE socket option.
+        keep-alive-enabled: func() -> result<bool, error-code>;
+        set-keep-alive-enabled: func(value: bool) -> result<_, error-code>;
+
+        /// Amount of time the connection has to be idle before TCP starts sending keepalive packets.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        /// Any other value will never cause an error, but it might be silently clamped and/or rounded.
+        /// I.e. after setting a value, reading the same setting back may return a different value.
+        ///
+        /// Equivalent to the TCP_KEEPIDLE socket option. (TCP_KEEPALIVE on MacOS)
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:     (set) The provided value was 0.
+        keep-alive-idle-time: func() -> result<duration, error-code>;
+        set-keep-alive-idle-time: func(value: duration) -> result<_, error-code>;
+
+        /// The time between keepalive packets.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        /// Any other value will never cause an error, but it might be silently clamped and/or rounded.
+        /// I.e. after setting a value, reading the same setting back may return a different value.
+        ///
+        /// Equivalent to the TCP_KEEPINTVL socket option.
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:     (set) The provided value was 0.
+        keep-alive-interval: func() -> result<duration, error-code>;
+        set-keep-alive-interval: func(value: duration) -> result<_, error-code>;
+
+        /// The maximum amount of keepalive packets TCP should send before aborting the connection.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        /// Any other value will never cause an error, but it might be silently clamped and/or rounded.
+        /// I.e. after setting a value, reading the same setting back may return a different value.
+        ///
+        /// Equivalent to the TCP_KEEPCNT socket option.
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:     (set) The provided value was 0.
+        keep-alive-count: func() -> result<u32, error-code>;
+        set-keep-alive-count: func(value: u32) -> result<_, error-code>;
+
+        /// Equivalent to the IP_TTL & IPV6_UNICAST_HOPS socket options.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:     (set) The TTL value must be 1 or higher.
+        /// - `invalid-state`:        (set) The socket is already in the Connection state.
+        /// - `invalid-state`:        (set) The socket is already in the Listener state.
+        hop-limit: func() -> result<u8, error-code>;
+        set-hop-limit: func(value: u8) -> result<_, error-code>;
+
+        /// The kernel buffer space reserved for sends/receives on this socket.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        /// Any other value will never cause an error, but it might be silently clamped and/or rounded.
+        /// I.e. after setting a value, reading the same setting back may return a different value.
+        ///
+        /// Equivalent to the SO_RCVBUF and SO_SNDBUF socket options.
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:     (set) The provided value was 0.
+        /// - `invalid-state`:        (set) The socket is already in the Connection state.
+        /// - `invalid-state`:        (set) The socket is already in the Listener state.
+        receive-buffer-size: func() -> result<u64, error-code>;
+        set-receive-buffer-size: func(value: u64) -> result<_, error-code>;
+        send-buffer-size: func() -> result<u64, error-code>;
+        set-send-buffer-size: func(value: u64) -> result<_, error-code>;
+
+        /// Create a `pollable` which will resolve once the socket is ready for I/O.
+        ///
+        /// Note: this function is here for WASI Preview2 only.
+        /// It's planned to be removed when `future` is natively supported in Preview3.
+        subscribe: func() -> pollable;
+
+        /// Initiate a graceful shutdown.
+        ///
+        /// - `receive`: The socket is not expecting to receive any data from
+        ///   the peer. The `input-stream` associated with this socket will be
+        ///   closed. Any data still in the receive queue at time of calling
+        ///   this method will be discarded.
+        /// - `send`: The socket has no more data to send to the peer. The `output-stream`
+        ///   associated with this socket will be closed and a FIN packet will be sent.
+        /// - `both`: Same effect as `receive` & `send` combined.
+        ///
+        /// This function is idempotent. Shutting a down a direction more than once
+        /// has no effect and returns `ok`.
+        ///
+        /// The shutdown function does not close (drop) the socket.
+        ///
+        /// # Typical errors
+        /// - `invalid-state`: The socket is not in the Connection state. (ENOTCONN)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/shutdown.html>
+        /// - <https://man7.org/linux/man-pages/man2/shutdown.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-shutdown>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=shutdown&sektion=2>
+        shutdown: func(shutdown-type: shutdown-type) -> result<_, error-code>;
+    }
+}

data/ext/cargo-vendor/wasmtime-wasi-17.0.1/wit/deps/sockets/udp-create-socket.wit

@@ -0,0 +1,27 @@
+
+interface udp-create-socket {
+    use network.{network, error-code, ip-address-family};
+    use udp.{udp-socket};
+
+    /// Create a new UDP socket.
+    ///
+    /// Similar to `socket(AF_INET or AF_INET6, SOCK_DGRAM, IPPROTO_UDP)` in POSIX.
+    /// On IPv6 sockets, IPV6_V6ONLY is enabled by default and can't be configured otherwise.
+    ///
+    /// This function does not require a network capability handle. This is considered to be safe because
+    /// at time of creation, the socket is not bound to any `network` yet. Up to the moment `bind` is called,
+    /// the socket is effectively an in-memory configuration object, unable to communicate with the outside world.
+    ///
+    /// All sockets are non-blocking. Use the wasi-poll interface to block on asynchronous operations.
+    ///
+    /// # Typical errors
+    /// - `not-supported`:     The specified `address-family` is not supported. (EAFNOSUPPORT)
+    /// - `new-socket-limit`:  The new socket resource could not be created because of a system limit. (EMFILE, ENFILE)
+    ///
+    /// # References:
+    /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/socket.html>
+    /// - <https://man7.org/linux/man-pages/man2/socket.2.html>
+    /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-wsasocketw>
+    /// - <https://man.freebsd.org/cgi/man.cgi?query=socket&sektion=2>
+    create-udp-socket: func(address-family: ip-address-family) -> result<udp-socket, error-code>;
+}

data/ext/cargo-vendor/wasmtime-wasi-17.0.1/wit/deps/sockets/udp.wit

@@ -0,0 +1,264 @@
+
+interface udp {
+    use wasi:io/poll@0.2.0.{pollable};
+    use network.{network, error-code, ip-socket-address, ip-address-family};
+
+    /// A received datagram.
+    record incoming-datagram {
+        /// The payload.
+        /// 
+        /// Theoretical max size: ~64 KiB. In practice, typically less than 1500 bytes.
+        data: list<u8>,
+
+        /// The source address.
+        ///
+        /// This field is guaranteed to match the remote address the stream was initialized with, if any.
+        ///
+        /// Equivalent to the `src_addr` out parameter of `recvfrom`.
+        remote-address: ip-socket-address,
+    }
+
+    /// A datagram to be sent out.
+    record outgoing-datagram {
+        /// The payload.
+        data: list<u8>,
+
+        /// The destination address.
+        ///
+        /// The requirements on this field depend on how the stream was initialized:
+        /// - with a remote address: this field must be None or match the stream's remote address exactly.
+        /// - without a remote address: this field is required.
+        ///
+        /// If this value is None, the send operation is equivalent to `send` in POSIX. Otherwise it is equivalent to `sendto`.
+        remote-address: option<ip-socket-address>,
+    }
+
+
+
+    /// A UDP socket handle.
+    resource udp-socket {
+        /// Bind the socket to a specific network on the provided IP address and port.
+        ///
+        /// If the IP address is zero (`0.0.0.0` in IPv4, `::` in IPv6), it is left to the implementation to decide which
+        /// network interface(s) to bind to.
+        /// If the port is zero, the socket will be bound to a random free port.
+        ///
+        /// Unlike in POSIX, this function is async. This enables interactive WASI hosts to inject permission prompts.
+        ///
+        /// # Typical `start` errors
+        /// - `invalid-argument`:          The `local-address` has the wrong address family. (EAFNOSUPPORT, EFAULT on Windows)
+        /// - `invalid-state`:             The socket is already bound. (EINVAL)
+        ///
+        /// # Typical `finish` errors
+        /// - `address-in-use`:            No ephemeral ports available. (EADDRINUSE, ENOBUFS on Windows)
+        /// - `address-in-use`:            Address is already in use. (EADDRINUSE)
+        /// - `address-not-bindable`:      `local-address` is not an address that the `network` can bind to. (EADDRNOTAVAIL)
+        /// - `not-in-progress`:           A `bind` operation is not in progress.
+        /// - `would-block`:               Can't finish the operation, it is still in progress. (EWOULDBLOCK, EAGAIN)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/bind.html>
+        /// - <https://man7.org/linux/man-pages/man2/bind.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-bind>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=bind&sektion=2&format=html>
+        start-bind: func(network: borrow<network>, local-address: ip-socket-address) -> result<_, error-code>;
+        finish-bind: func() -> result<_, error-code>;
+
+        /// Set up inbound & outbound communication channels, optionally to a specific peer.
+        ///
+        /// This function only changes the local socket configuration and does not generate any network traffic.
+        /// On success, the `remote-address` of the socket is updated. The `local-address` may be updated as well,
+        /// based on the best network path to `remote-address`.
+        ///
+        /// When a `remote-address` is provided, the returned streams are limited to communicating with that specific peer:
+        /// - `send` can only be used to send to this destination.
+        /// - `receive` will only return datagrams sent from the provided `remote-address`.
+        ///
+        /// This method may be called multiple times on the same socket to change its association, but
+        /// only the most recently returned pair of streams will be operational. Implementations may trap if
+        /// the streams returned by a previous invocation haven't been dropped yet before calling `stream` again.
+        /// 
+        /// The POSIX equivalent in pseudo-code is:
+        /// ```text
+        /// if (was previously connected) {
+        /// 	connect(s, AF_UNSPEC)
+        /// }
+        /// if (remote_address is Some) {
+        /// 	connect(s, remote_address)
+        /// }
+        /// ```
+        ///
+        /// Unlike in POSIX, the socket must already be explicitly bound.
+        /// 
+        /// # Typical errors
+        /// - `invalid-argument`:          The `remote-address` has the wrong address family. (EAFNOSUPPORT)
+        /// - `invalid-argument`:          The IP address in `remote-address` is set to INADDR_ANY (`0.0.0.0` / `::`). (EDESTADDRREQ, EADDRNOTAVAIL)
+        /// - `invalid-argument`:          The port in `remote-address` is set to 0. (EDESTADDRREQ, EADDRNOTAVAIL)
+        /// - `invalid-state`:             The socket is not bound.
+        /// - `address-in-use`:            Tried to perform an implicit bind, but there were no ephemeral ports available. (EADDRINUSE, EADDRNOTAVAIL on Linux, EAGAIN on BSD)
+        /// - `remote-unreachable`:        The remote address is not reachable. (ECONNRESET, ENETRESET, EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN, ENONET)
+        /// - `connection-refused`:        The connection was refused. (ECONNREFUSED)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/connect.html>
+        /// - <https://man7.org/linux/man-pages/man2/connect.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-connect>
+        /// - <https://man.freebsd.org/cgi/man.cgi?connect>
+        %stream: func(remote-address: option<ip-socket-address>) -> result<tuple<incoming-datagram-stream, outgoing-datagram-stream>, error-code>;
+
+        /// Get the current bound address.
+        ///
+        /// POSIX mentions:
+        /// > If the socket has not been bound to a local name, the value
+        /// > stored in the object pointed to by `address` is unspecified.
+        ///
+        /// WASI is stricter and requires `local-address` to return `invalid-state` when the socket hasn't been bound yet.
+        /// 
+        /// # Typical errors
+        /// - `invalid-state`: The socket is not bound to any local address.
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/getsockname.html>
+        /// - <https://man7.org/linux/man-pages/man2/getsockname.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-getsockname>
+        /// - <https://man.freebsd.org/cgi/man.cgi?getsockname>
+        local-address: func() -> result<ip-socket-address, error-code>;
+
+        /// Get the address the socket is currently streaming to.
+        ///
+        /// # Typical errors
+        /// - `invalid-state`: The socket is not streaming to a specific remote address. (ENOTCONN)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/getpeername.html>
+        /// - <https://man7.org/linux/man-pages/man2/getpeername.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-getpeername>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=getpeername&sektion=2&n=1>
+        remote-address: func() -> result<ip-socket-address, error-code>;
+
+        /// Whether this is a IPv4 or IPv6 socket.
+        ///
+        /// Equivalent to the SO_DOMAIN socket option.
+        address-family: func() -> ip-address-family;
+
+        /// Equivalent to the IP_TTL & IPV6_UNICAST_HOPS socket options.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:     (set) The TTL value must be 1 or higher.
+        unicast-hop-limit: func() -> result<u8, error-code>;
+        set-unicast-hop-limit: func(value: u8) -> result<_, error-code>;
+
+        /// The kernel buffer space reserved for sends/receives on this socket.
+        ///
+        /// If the provided value is 0, an `invalid-argument` error is returned.
+        /// Any other value will never cause an error, but it might be silently clamped and/or rounded.
+        /// I.e. after setting a value, reading the same setting back may return a different value.
+        ///
+        /// Equivalent to the SO_RCVBUF and SO_SNDBUF socket options.
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:     (set) The provided value was 0.
+        receive-buffer-size: func() -> result<u64, error-code>;
+        set-receive-buffer-size: func(value: u64) -> result<_, error-code>;
+        send-buffer-size: func() -> result<u64, error-code>;
+        set-send-buffer-size: func(value: u64) -> result<_, error-code>;
+
+        /// Create a `pollable` which will resolve once the socket is ready for I/O.
+        ///
+        /// Note: this function is here for WASI Preview2 only.
+        /// It's planned to be removed when `future` is natively supported in Preview3.
+        subscribe: func() -> pollable;
+    }
+
+    resource incoming-datagram-stream {
+        /// Receive messages on the socket.
+        ///
+        /// This function attempts to receive up to `max-results` datagrams on the socket without blocking.
+        /// The returned list may contain fewer elements than requested, but never more.
+        ///
+        /// This function returns successfully with an empty list when either:
+        /// - `max-results` is 0, or:
+        /// - `max-results` is greater than 0, but no results are immediately available.
+        /// This function never returns `error(would-block)`.
+        ///
+        /// # Typical errors
+        /// - `remote-unreachable`: The remote address is not reachable. (ECONNRESET, ENETRESET on Windows, EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN, ENONET)
+        /// - `connection-refused`: The connection was refused. (ECONNREFUSED)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/recvfrom.html>
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/recvmsg.html>
+        /// - <https://man7.org/linux/man-pages/man2/recv.2.html>
+        /// - <https://man7.org/linux/man-pages/man2/recvmmsg.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-recv>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-recvfrom>
+        /// - <https://learn.microsoft.com/en-us/previous-versions/windows/desktop/legacy/ms741687(v=vs.85)>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=recv&sektion=2>
+        receive: func(max-results: u64) -> result<list<incoming-datagram>, error-code>;
+
+        /// Create a `pollable` which will resolve once the stream is ready to receive again.
+        ///
+        /// Note: this function is here for WASI Preview2 only.
+        /// It's planned to be removed when `future` is natively supported in Preview3.
+        subscribe: func() -> pollable;
+    }
+
+    resource outgoing-datagram-stream {
+        /// Check readiness for sending. This function never blocks.
+        ///
+        /// Returns the number of datagrams permitted for the next call to `send`,
+        /// or an error. Calling `send` with more datagrams than this function has
+        /// permitted will trap.
+        ///
+        /// When this function returns ok(0), the `subscribe` pollable will
+        /// become ready when this function will report at least ok(1), or an
+        /// error.
+        /// 
+        /// Never returns `would-block`.
+        check-send: func() -> result<u64, error-code>;
+
+        /// Send messages on the socket.
+        ///
+        /// This function attempts to send all provided `datagrams` on the socket without blocking and
+        /// returns how many messages were actually sent (or queued for sending). This function never
+        /// returns `error(would-block)`. If none of the datagrams were able to be sent, `ok(0)` is returned.
+        ///
+        /// This function semantically behaves the same as iterating the `datagrams` list and sequentially
+        /// sending each individual datagram until either the end of the list has been reached or the first error occurred.
+        /// If at least one datagram has been sent successfully, this function never returns an error.
+        ///
+        /// If the input list is empty, the function returns `ok(0)`.
+        ///
+        /// Each call to `send` must be permitted by a preceding `check-send`. Implementations must trap if
+        /// either `check-send` was not called or `datagrams` contains more items than `check-send` permitted.
+        ///
+        /// # Typical errors
+        /// - `invalid-argument`:        The `remote-address` has the wrong address family. (EAFNOSUPPORT)
+        /// - `invalid-argument`:        The IP address in `remote-address` is set to INADDR_ANY (`0.0.0.0` / `::`). (EDESTADDRREQ, EADDRNOTAVAIL)
+        /// - `invalid-argument`:        The port in `remote-address` is set to 0. (EDESTADDRREQ, EADDRNOTAVAIL)
+        /// - `invalid-argument`:        The socket is in "connected" mode and `remote-address` is `some` value that does not match the address passed to `stream`. (EISCONN)
+        /// - `invalid-argument`:        The socket is not "connected" and no value for `remote-address` was provided. (EDESTADDRREQ)
+        /// - `remote-unreachable`:      The remote address is not reachable. (ECONNRESET, ENETRESET on Windows, EHOSTUNREACH, EHOSTDOWN, ENETUNREACH, ENETDOWN, ENONET)
+        /// - `connection-refused`:      The connection was refused. (ECONNREFUSED)
+        /// - `datagram-too-large`:      The datagram is too large. (EMSGSIZE)
+        ///
+        /// # References
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/sendto.html>
+        /// - <https://pubs.opengroup.org/onlinepubs/9699919799/functions/sendmsg.html>
+        /// - <https://man7.org/linux/man-pages/man2/send.2.html>
+        /// - <https://man7.org/linux/man-pages/man2/sendmmsg.2.html>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-send>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-sendto>
+        /// - <https://learn.microsoft.com/en-us/windows/win32/api/winsock2/nf-winsock2-wsasendmsg>
+        /// - <https://man.freebsd.org/cgi/man.cgi?query=send&sektion=2>
+        send: func(datagrams: list<outgoing-datagram>) -> result<u64, error-code>;
+        
+        /// Create a `pollable` which will resolve once the stream is ready to send again.
+        ///
+        /// Note: this function is here for WASI Preview2 only.
+        /// It's planned to be removed when `future` is natively supported in Preview3.
+        subscribe: func() -> pollable;
+    }
+}

data/ext/cargo-vendor/wasmtime-wasi-17.0.1/wit/deps/sockets/world.wit

@@ -0,0 +1,11 @@
+package wasi:sockets@0.2.0;
+
+world imports {
+    import instance-network;
+    import network;
+    import udp;
+    import udp-create-socket;
+    import tcp;
+    import tcp-create-socket;
+    import ip-name-lookup;
+}

data/ext/cargo-vendor/wasmtime-wasi-17.0.1/wit/test.wit

@@ -0,0 +1,22 @@
+package wasmtime:wasi;
+
+// only used as part of `test-programs`
+world test-reactor {
+  include wasi:cli/imports@0.2.0;
+
+  export add-strings: func(s: list<string>) -> u32;
+  export get-strings: func() -> list<string>;
+
+  use wasi:io/streams@0.2.0.{output-stream};
+
+  export write-strings-to: func(o: output-stream) -> result;
+
+  use wasi:filesystem/types@0.2.0.{descriptor-stat};
+  export pass-an-imported-record: func(d: descriptor-stat) -> string;
+}
+
+world test-command {
+  include wasi:cli/imports@0.2.0;
+  import wasi:http/types@0.2.0;
+  import wasi:http/outgoing-handler@0.2.0;
+}

data/ext/cargo-vendor/wasmtime-winch-17.0.1/.cargo-checksum.json

@@ -0,0 +1 @@
+{"files":{"Cargo.toml":"87275f72a8abb045953f6539f45bf345e86aba77d80a1cbe9341700be1042529","LICENSE":"a6c48161a09acc75a0e25503bab66a731eb5fba5392ed4bb4743e4ba5085327a","src/builder.rs":"99f5a906a1ba1ee68470831a4252baef3bb3063daa015bb3ab0d6c114929fcb0","src/compiler.rs":"2450ea31449cabb2e96e6130e3fc2ce31fae0dd0c438de74a5397b90ea3768ff","src/lib.rs":"af1ae41ca004ba001c133bc39d3d148377d6c986ca9dbe2775c8681d8d244e9f"},"package":"d3f5d76d399cb4423e6f178bc154a0e1c314711e28dabaa6e757e56628a083ec"}