wasmtime 12.0.0 → 13.0.0

data/ext/cargo-vendor/gimli-0.27.3/src/read/line.rs

@@ -1,3130 +0,0 @@
-use alloc::vec::Vec;
-use core::fmt;
-use core::num::{NonZeroU64, Wrapping};
-use core::result;
-
-use crate::common::{
-    DebugLineOffset, DebugLineStrOffset, DebugStrOffset, DebugStrOffsetsIndex, Encoding, Format,
-    LineEncoding, SectionId,
-};
-use crate::constants;
-use crate::endianity::Endianity;
-use crate::read::{AttributeValue, EndianSlice, Error, Reader, ReaderOffset, Result, Section};
-
-/// The `DebugLine` struct contains the source location to instruction mapping
-/// found in the `.debug_line` section.
-#[derive(Debug, Default, Clone, Copy)]
-pub struct DebugLine<R> {
-    debug_line_section: R,
-}
-
-impl<'input, Endian> DebugLine<EndianSlice<'input, Endian>>
-where
-    Endian: Endianity,
-{
-    /// Construct a new `DebugLine` instance from the data in the `.debug_line`
-    /// section.
-    ///
-    /// It is the caller's responsibility to read the `.debug_line` section and
-    /// present it as a `&[u8]` slice. That means using some ELF loader on
-    /// Linux, a Mach-O loader on macOS, etc.
-    ///
-    /// ```
-    /// use gimli::{DebugLine, LittleEndian};
-    ///
-    /// # let buf = [0x00, 0x01, 0x02, 0x03];
-    /// # let read_debug_line_section_somehow = || &buf;
-    /// let debug_line = DebugLine::new(read_debug_line_section_somehow(), LittleEndian);
-    /// ```
-    pub fn new(debug_line_section: &'input [u8], endian: Endian) -> Self {
-        Self::from(EndianSlice::new(debug_line_section, endian))
-    }
-}
-
-impl<R: Reader> DebugLine<R> {
-    /// Parse the line number program whose header is at the given `offset` in the
-    /// `.debug_line` section.
-    ///
-    /// The `address_size` must match the compilation unit that the lines apply to.
-    /// The `comp_dir` should be from the `DW_AT_comp_dir` attribute of the compilation
-    /// unit. The `comp_name` should be from the `DW_AT_name` attribute of the
-    /// compilation unit.
-    ///
-    /// ```rust,no_run
-    /// use gimli::{DebugLine, DebugLineOffset, IncompleteLineProgram, EndianSlice, LittleEndian};
-    ///
-    /// # let buf = [];
-    /// # let read_debug_line_section_somehow = || &buf;
-    /// let debug_line = DebugLine::new(read_debug_line_section_somehow(), LittleEndian);
-    ///
-    /// // In a real example, we'd grab the offset via a compilation unit
-    /// // entry's `DW_AT_stmt_list` attribute, and the address size from that
-    /// // unit directly.
-    /// let offset = DebugLineOffset(0);
-    /// let address_size = 8;
-    ///
-    /// let program = debug_line.program(offset, address_size, None, None)
-    ///     .expect("should have found a header at that offset, and parsed it OK");
-    /// ```
-    pub fn program(
-        &self,
-        offset: DebugLineOffset<R::Offset>,
-        address_size: u8,
-        comp_dir: Option<R>,
-        comp_name: Option<R>,
-    ) -> Result<IncompleteLineProgram<R>> {
-        let input = &mut self.debug_line_section.clone();
-        input.skip(offset.0)?;
-        let header = LineProgramHeader::parse(input, offset, address_size, comp_dir, comp_name)?;
-        let program = IncompleteLineProgram { header };
-        Ok(program)
-    }
-}
-
-impl<T> DebugLine<T> {
-    /// Create a `DebugLine` section that references the data in `self`.
-    ///
-    /// This is useful when `R` implements `Reader` but `T` does not.
-    ///
-    /// ## Example Usage
-    ///
-    /// ```rust,no_run
-    /// # let load_section = || unimplemented!();
-    /// // Read the DWARF section into a `Vec` with whatever object loader you're using.
-    /// let owned_section: gimli::DebugLine<Vec<u8>> = load_section();
-    /// // Create a reference to the DWARF section.
-    /// let section = owned_section.borrow(|section| {
-    ///     gimli::EndianSlice::new(&section, gimli::LittleEndian)
-    /// });
-    /// ```
-    pub fn borrow<'a, F, R>(&'a self, mut borrow: F) -> DebugLine<R>
-    where
-        F: FnMut(&'a T) -> R,
-    {
-        borrow(&self.debug_line_section).into()
-    }
-}
-
-impl<R> Section<R> for DebugLine<R> {
-    fn id() -> SectionId {
-        SectionId::DebugLine
-    }
-
-    fn reader(&self) -> &R {
-        &self.debug_line_section
-    }
-}
-
-impl<R> From<R> for DebugLine<R> {
-    fn from(debug_line_section: R) -> Self {
-        DebugLine { debug_line_section }
-    }
-}
-
-/// Deprecated. `LineNumberProgram` has been renamed to `LineProgram`.
-#[deprecated(note = "LineNumberProgram has been renamed to LineProgram, use that instead.")]
-pub type LineNumberProgram<R, Offset> = dyn LineProgram<R, Offset>;
-
-/// A `LineProgram` provides access to a `LineProgramHeader` and
-/// a way to add files to the files table if necessary. Gimli consumers should
-/// never need to use or see this trait.
-pub trait LineProgram<R, Offset = <R as Reader>::Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    /// Get a reference to the held `LineProgramHeader`.
-    fn header(&self) -> &LineProgramHeader<R, Offset>;
-    /// Add a file to the file table if necessary.
-    fn add_file(&mut self, file: FileEntry<R, Offset>);
-}
-
-impl<R, Offset> LineProgram<R, Offset> for IncompleteLineProgram<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    fn header(&self) -> &LineProgramHeader<R, Offset> {
-        &self.header
-    }
-    fn add_file(&mut self, file: FileEntry<R, Offset>) {
-        self.header.file_names.push(file);
-    }
-}
-
-impl<'program, R, Offset> LineProgram<R, Offset> for &'program CompleteLineProgram<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    fn header(&self) -> &LineProgramHeader<R, Offset> {
-        &self.header
-    }
-    fn add_file(&mut self, _: FileEntry<R, Offset>) {
-        // Nop. Our file table is already complete.
-    }
-}
-
-/// Deprecated. `StateMachine` has been renamed to `LineRows`.
-#[deprecated(note = "StateMachine has been renamed to LineRows, use that instead.")]
-pub type StateMachine<R, Program, Offset> = LineRows<R, Program, Offset>;
-
-/// Executes a `LineProgram` to iterate over the rows in the matrix of line number information.
-///
-/// "The hypothetical machine used by a consumer of the line number information
-/// to expand the byte-coded instruction stream into a matrix of line number
-/// information." -- Section 6.2.1
-#[derive(Debug, Clone)]
-pub struct LineRows<R, Program, Offset = <R as Reader>::Offset>
-where
-    Program: LineProgram<R, Offset>,
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    program: Program,
-    row: LineRow,
-    instructions: LineInstructions<R>,
-}
-
-type OneShotLineRows<R, Offset = <R as Reader>::Offset> =
-    LineRows<R, IncompleteLineProgram<R, Offset>, Offset>;
-
-type ResumedLineRows<'program, R, Offset = <R as Reader>::Offset> =
-    LineRows<R, &'program CompleteLineProgram<R, Offset>, Offset>;
-
-impl<R, Program, Offset> LineRows<R, Program, Offset>
-where
-    Program: LineProgram<R, Offset>,
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    fn new(program: IncompleteLineProgram<R, Offset>) -> OneShotLineRows<R, Offset> {
-        let row = LineRow::new(program.header());
-        let instructions = LineInstructions {
-            input: program.header().program_buf.clone(),
-        };
-        LineRows {
-            program,
-            row,
-            instructions,
-        }
-    }
-
-    fn resume<'program>(
-        program: &'program CompleteLineProgram<R, Offset>,
-        sequence: &LineSequence<R>,
-    ) -> ResumedLineRows<'program, R, Offset> {
-        let row = LineRow::new(program.header());
-        let instructions = sequence.instructions.clone();
-        LineRows {
-            program,
-            row,
-            instructions,
-        }
-    }
-
-    /// Get a reference to the header for this state machine's line number
-    /// program.
-    #[inline]
-    pub fn header(&self) -> &LineProgramHeader<R, Offset> {
-        self.program.header()
-    }
-
-    /// Parse and execute the next instructions in the line number program until
-    /// another row in the line number matrix is computed.
-    ///
-    /// The freshly computed row is returned as `Ok(Some((header, row)))`.
-    /// If the matrix is complete, and there are no more new rows in the line
-    /// number matrix, then `Ok(None)` is returned. If there was an error parsing
-    /// an instruction, then `Err(e)` is returned.
-    ///
-    /// Unfortunately, the references mean that this cannot be a
-    /// `FallibleIterator`.
-    pub fn next_row(&mut self) -> Result<Option<(&LineProgramHeader<R, Offset>, &LineRow)>> {
-        // Perform any reset that was required after copying the previous row.
-        self.row.reset(self.program.header());
-
-        loop {
-            // Split the borrow here, rather than calling `self.header()`.
-            match self.instructions.next_instruction(self.program.header()) {
-                Err(err) => return Err(err),
-                Ok(None) => return Ok(None),
-                Ok(Some(instruction)) => {
-                    if self.row.execute(instruction, &mut self.program) {
-                        if self.row.tombstone {
-                            // Perform any reset that was required for the tombstone row.
-                            // Normally this is done when `next_row` is called again, but for
-                            // tombstones we loop immediately.
-                            self.row.reset(self.program.header());
-                        } else {
-                            return Ok(Some((self.header(), &self.row)));
-                        }
-                    }
-                    // Fall through, parse the next instruction, and see if that
-                    // yields a row.
-                }
-            }
-        }
-    }
-}
-
-/// Deprecated. `Opcode` has been renamed to `LineInstruction`.
-#[deprecated(note = "Opcode has been renamed to LineInstruction, use that instead.")]
-pub type Opcode<R> = LineInstruction<R, <R as Reader>::Offset>;
-
-/// A parsed line number program instruction.
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum LineInstruction<R, Offset = <R as Reader>::Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    /// > ### 6.2.5.1 Special Opcodes
-    /// >
-    /// > Each ubyte special opcode has the following effect on the state machine:
-    /// >
-    /// >   1. Add a signed integer to the line register.
-    /// >
-    /// >   2. Modify the operation pointer by incrementing the address and
-    /// >   op_index registers as described below.
-    /// >
-    /// >   3. Append a row to the matrix using the current values of the state
-    /// >   machine registers.
-    /// >
-    /// >   4. Set the basic_block register to “false.”
-    /// >
-    /// >   5. Set the prologue_end register to “false.”
-    /// >
-    /// >   6. Set the epilogue_begin register to “false.”
-    /// >
-    /// >   7. Set the discriminator register to 0.
-    /// >
-    /// > All of the special opcodes do those same seven things; they differ from
-    /// > one another only in what values they add to the line, address and
-    /// > op_index registers.
-    Special(u8),
-
-    /// "[`LineInstruction::Copy`] appends a row to the matrix using the current
-    /// values of the state machine registers. Then it sets the discriminator
-    /// register to 0, and sets the basic_block, prologue_end and epilogue_begin
-    /// registers to “false.”"
-    Copy,
-
-    /// "The DW_LNS_advance_pc opcode takes a single unsigned LEB128 operand as
-    /// the operation advance and modifies the address and op_index registers
-    /// [the same as `LineInstruction::Special`]"
-    AdvancePc(u64),
-
-    /// "The DW_LNS_advance_line opcode takes a single signed LEB128 operand and
-    /// adds that value to the line register of the state machine."
-    AdvanceLine(i64),
-
-    /// "The DW_LNS_set_file opcode takes a single unsigned LEB128 operand and
-    /// stores it in the file register of the state machine."
-    SetFile(u64),
-
-    /// "The DW_LNS_set_column opcode takes a single unsigned LEB128 operand and
-    /// stores it in the column register of the state machine."
-    SetColumn(u64),
-
-    /// "The DW_LNS_negate_stmt opcode takes no operands. It sets the is_stmt
-    /// register of the state machine to the logical negation of its current
-    /// value."
-    NegateStatement,
-
-    /// "The DW_LNS_set_basic_block opcode takes no operands. It sets the
-    /// basic_block register of the state machine to “true.”"
-    SetBasicBlock,
-
-    /// > The DW_LNS_const_add_pc opcode takes no operands. It advances the
-    /// > address and op_index registers by the increments corresponding to
-    /// > special opcode 255.
-    /// >
-    /// > When the line number program needs to advance the address by a small
-    /// > amount, it can use a single special opcode, which occupies a single
-    /// > byte. When it needs to advance the address by up to twice the range of
-    /// > the last special opcode, it can use DW_LNS_const_add_pc followed by a
-    /// > special opcode, for a total of two bytes. Only if it needs to advance
-    /// > the address by more than twice that range will it need to use both
-    /// > DW_LNS_advance_pc and a special opcode, requiring three or more bytes.
-    ConstAddPc,
-
-    /// > The DW_LNS_fixed_advance_pc opcode takes a single uhalf (unencoded)
-    /// > operand and adds it to the address register of the state machine and
-    /// > sets the op_index register to 0. This is the only standard opcode whose
-    /// > operand is not a variable length number. It also does not multiply the
-    /// > operand by the minimum_instruction_length field of the header.
-    FixedAddPc(u16),
-
-    /// "[`LineInstruction::SetPrologueEnd`] sets the prologue_end register to “true”."
-    SetPrologueEnd,
-
-    /// "[`LineInstruction::SetEpilogueBegin`] sets the epilogue_begin register to
-    /// “true”."
-    SetEpilogueBegin,
-
-    /// "The DW_LNS_set_isa opcode takes a single unsigned LEB128 operand and
-    /// stores that value in the isa register of the state machine."
-    SetIsa(u64),
-
-    /// An unknown standard opcode with zero operands.
-    UnknownStandard0(constants::DwLns),
-
-    /// An unknown standard opcode with one operand.
-    UnknownStandard1(constants::DwLns, u64),
-
-    /// An unknown standard opcode with multiple operands.
-    UnknownStandardN(constants::DwLns, R),
-
-    /// > [`LineInstruction::EndSequence`] sets the end_sequence register of the state
-    /// > machine to “true” and appends a row to the matrix using the current
-    /// > values of the state-machine registers. Then it resets the registers to
-    /// > the initial values specified above (see Section 6.2.2). Every line
-    /// > number program sequence must end with a DW_LNE_end_sequence instruction
-    /// > which creates a row whose address is that of the byte after the last
-    /// > target machine instruction of the sequence.
-    EndSequence,
-
-    /// > The DW_LNE_set_address opcode takes a single relocatable address as an
-    /// > operand. The size of the operand is the size of an address on the target
-    /// > machine. It sets the address register to the value given by the
-    /// > relocatable address and sets the op_index register to 0.
-    /// >
-    /// > All of the other line number program opcodes that affect the address
-    /// > register add a delta to it. This instruction stores a relocatable value
-    /// > into it instead.
-    SetAddress(u64),
-
-    /// Defines a new source file in the line number program and appends it to
-    /// the line number program header's list of source files.
-    DefineFile(FileEntry<R, Offset>),
-
-    /// "The DW_LNE_set_discriminator opcode takes a single parameter, an
-    /// unsigned LEB128 integer. It sets the discriminator register to the new
-    /// value."
-    SetDiscriminator(u64),
-
-    /// An unknown extended opcode and the slice of its unparsed operands.
-    UnknownExtended(constants::DwLne, R),
-}
-
-impl<R, Offset> LineInstruction<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    fn parse<'header>(
-        header: &'header LineProgramHeader<R>,
-        input: &mut R,
-    ) -> Result<LineInstruction<R>>
-    where
-        R: 'header,
-    {
-        let opcode = input.read_u8()?;
-        if opcode == 0 {
-            let length = input.read_uleb128().and_then(R::Offset::from_u64)?;
-            let mut instr_rest = input.split(length)?;
-            let opcode = instr_rest.read_u8()?;
-
-            match constants::DwLne(opcode) {
-                constants::DW_LNE_end_sequence => Ok(LineInstruction::EndSequence),
-
-                constants::DW_LNE_set_address => {
-                    let address = instr_rest.read_address(header.address_size())?;
-                    Ok(LineInstruction::SetAddress(address))
-                }
-
-                constants::DW_LNE_define_file => {
-                    if header.version() <= 4 {
-                        let path_name = instr_rest.read_null_terminated_slice()?;
-                        let entry = FileEntry::parse(&mut instr_rest, path_name)?;
-                        Ok(LineInstruction::DefineFile(entry))
-                    } else {
-                        Ok(LineInstruction::UnknownExtended(
-                            constants::DW_LNE_define_file,
-                            instr_rest,
-                        ))
-                    }
-                }
-
-                constants::DW_LNE_set_discriminator => {
-                    let discriminator = instr_rest.read_uleb128()?;
-                    Ok(LineInstruction::SetDiscriminator(discriminator))
-                }
-
-                otherwise => Ok(LineInstruction::UnknownExtended(otherwise, instr_rest)),
-            }
-        } else if opcode >= header.opcode_base {
-            Ok(LineInstruction::Special(opcode))
-        } else {
-            match constants::DwLns(opcode) {
-                constants::DW_LNS_copy => Ok(LineInstruction::Copy),
-
-                constants::DW_LNS_advance_pc => {
-                    let advance = input.read_uleb128()?;
-                    Ok(LineInstruction::AdvancePc(advance))
-                }
-
-                constants::DW_LNS_advance_line => {
-                    let increment = input.read_sleb128()?;
-                    Ok(LineInstruction::AdvanceLine(increment))
-                }
-
-                constants::DW_LNS_set_file => {
-                    let file = input.read_uleb128()?;
-                    Ok(LineInstruction::SetFile(file))
-                }
-
-                constants::DW_LNS_set_column => {
-                    let column = input.read_uleb128()?;
-                    Ok(LineInstruction::SetColumn(column))
-                }
-
-                constants::DW_LNS_negate_stmt => Ok(LineInstruction::NegateStatement),
-
-                constants::DW_LNS_set_basic_block => Ok(LineInstruction::SetBasicBlock),
-
-                constants::DW_LNS_const_add_pc => Ok(LineInstruction::ConstAddPc),
-
-                constants::DW_LNS_fixed_advance_pc => {
-                    let advance = input.read_u16()?;
-                    Ok(LineInstruction::FixedAddPc(advance))
-                }
-
-                constants::DW_LNS_set_prologue_end => Ok(LineInstruction::SetPrologueEnd),
-
-                constants::DW_LNS_set_epilogue_begin => Ok(LineInstruction::SetEpilogueBegin),
-
-                constants::DW_LNS_set_isa => {
-                    let isa = input.read_uleb128()?;
-                    Ok(LineInstruction::SetIsa(isa))
-                }
-
-                otherwise => {
-                    let mut opcode_lengths = header.standard_opcode_lengths().clone();
-                    opcode_lengths.skip(R::Offset::from_u8(opcode - 1))?;
-                    let num_args = opcode_lengths.read_u8()? as usize;
-                    match num_args {
-                        0 => Ok(LineInstruction::UnknownStandard0(otherwise)),
-                        1 => {
-                            let arg = input.read_uleb128()?;
-                            Ok(LineInstruction::UnknownStandard1(otherwise, arg))
-                        }
-                        _ => {
-                            let mut args = input.clone();
-                            for _ in 0..num_args {
-                                input.read_uleb128()?;
-                            }
-                            let len = input.offset_from(&args);
-                            args.truncate(len)?;
-                            Ok(LineInstruction::UnknownStandardN(otherwise, args))
-                        }
-                    }
-                }
-            }
-        }
-    }
-}
-
-impl<R, Offset> fmt::Display for LineInstruction<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    fn fmt(&self, f: &mut fmt::Formatter) -> result::Result<(), fmt::Error> {
-        match *self {
-            LineInstruction::Special(opcode) => write!(f, "Special opcode {}", opcode),
-            LineInstruction::Copy => write!(f, "{}", constants::DW_LNS_copy),
-            LineInstruction::AdvancePc(advance) => {
-                write!(f, "{} by {}", constants::DW_LNS_advance_pc, advance)
-            }
-            LineInstruction::AdvanceLine(increment) => {
-                write!(f, "{} by {}", constants::DW_LNS_advance_line, increment)
-            }
-            LineInstruction::SetFile(file) => {
-                write!(f, "{} to {}", constants::DW_LNS_set_file, file)
-            }
-            LineInstruction::SetColumn(column) => {
-                write!(f, "{} to {}", constants::DW_LNS_set_column, column)
-            }
-            LineInstruction::NegateStatement => write!(f, "{}", constants::DW_LNS_negate_stmt),
-            LineInstruction::SetBasicBlock => write!(f, "{}", constants::DW_LNS_set_basic_block),
-            LineInstruction::ConstAddPc => write!(f, "{}", constants::DW_LNS_const_add_pc),
-            LineInstruction::FixedAddPc(advance) => {
-                write!(f, "{} by {}", constants::DW_LNS_fixed_advance_pc, advance)
-            }
-            LineInstruction::SetPrologueEnd => write!(f, "{}", constants::DW_LNS_set_prologue_end),
-            LineInstruction::SetEpilogueBegin => {
-                write!(f, "{}", constants::DW_LNS_set_epilogue_begin)
-            }
-            LineInstruction::SetIsa(isa) => write!(f, "{} to {}", constants::DW_LNS_set_isa, isa),
-            LineInstruction::UnknownStandard0(opcode) => write!(f, "Unknown {}", opcode),
-            LineInstruction::UnknownStandard1(opcode, arg) => {
-                write!(f, "Unknown {} with operand {}", opcode, arg)
-            }
-            LineInstruction::UnknownStandardN(opcode, ref args) => {
-                write!(f, "Unknown {} with operands {:?}", opcode, args)
-            }
-            LineInstruction::EndSequence => write!(f, "{}", constants::DW_LNE_end_sequence),
-            LineInstruction::SetAddress(address) => {
-                write!(f, "{} to {}", constants::DW_LNE_set_address, address)
-            }
-            LineInstruction::DefineFile(_) => write!(f, "{}", constants::DW_LNE_define_file),
-            LineInstruction::SetDiscriminator(discr) => {
-                write!(f, "{} to {}", constants::DW_LNE_set_discriminator, discr)
-            }
-            LineInstruction::UnknownExtended(opcode, _) => write!(f, "Unknown {}", opcode),
-        }
-    }
-}
-
-/// Deprecated. `OpcodesIter` has been renamed to `LineInstructions`.
-#[deprecated(note = "OpcodesIter has been renamed to LineInstructions, use that instead.")]
-pub type OpcodesIter<R> = LineInstructions<R>;
-
-/// An iterator yielding parsed instructions.
-///
-/// See
-/// [`LineProgramHeader::instructions`](./struct.LineProgramHeader.html#method.instructions)
-/// for more details.
-#[derive(Clone, Debug)]
-pub struct LineInstructions<R: Reader> {
-    input: R,
-}
-
-impl<R: Reader> LineInstructions<R> {
-    fn remove_trailing(&self, other: &LineInstructions<R>) -> Result<LineInstructions<R>> {
-        let offset = other.input.offset_from(&self.input);
-        let mut input = self.input.clone();
-        input.truncate(offset)?;
-        Ok(LineInstructions { input })
-    }
-}
-
-impl<R: Reader> LineInstructions<R> {
-    /// Advance the iterator and return the next instruction.
-    ///
-    /// Returns the newly parsed instruction as `Ok(Some(instruction))`. Returns
-    /// `Ok(None)` when iteration is complete and all instructions have already been
-    /// parsed and yielded. If an error occurs while parsing the next attribute,
-    /// then this error is returned as `Err(e)`, and all subsequent calls return
-    /// `Ok(None)`.
-    ///
-    /// Unfortunately, the `header` parameter means that this cannot be a
-    /// `FallibleIterator`.
-    #[inline(always)]
-    pub fn next_instruction(
-        &mut self,
-        header: &LineProgramHeader<R>,
-    ) -> Result<Option<LineInstruction<R>>> {
-        if self.input.is_empty() {
-            return Ok(None);
-        }
-
-        match LineInstruction::parse(header, &mut self.input) {
-            Ok(instruction) => Ok(Some(instruction)),
-            Err(e) => {
-                self.input.empty();
-                Err(e)
-            }
-        }
-    }
-}
-
-/// Deprecated. `LineNumberRow` has been renamed to `LineRow`.
-#[deprecated(note = "LineNumberRow has been renamed to LineRow, use that instead.")]
-pub type LineNumberRow = LineRow;
-
-/// A row in the line number program's resulting matrix.
-///
-/// Each row is a copy of the registers of the state machine, as defined in section 6.2.2.
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub struct LineRow {
-    tombstone: bool,
-    address: Wrapping<u64>,
-    op_index: Wrapping<u64>,
-    file: u64,
-    line: Wrapping<u64>,
-    column: u64,
-    is_stmt: bool,
-    basic_block: bool,
-    end_sequence: bool,
-    prologue_end: bool,
-    epilogue_begin: bool,
-    isa: u64,
-    discriminator: u64,
-}
-
-impl LineRow {
-    /// Create a line number row in the initial state for the given program.
-    pub fn new<R: Reader>(header: &LineProgramHeader<R>) -> Self {
-        LineRow {
-            // "At the beginning of each sequence within a line number program, the
-            // state of the registers is:" -- Section 6.2.2
-            tombstone: false,
-            address: Wrapping(0),
-            op_index: Wrapping(0),
-            file: 1,
-            line: Wrapping(1),
-            column: 0,
-            // "determined by default_is_stmt in the line number program header"
-            is_stmt: header.line_encoding.default_is_stmt,
-            basic_block: false,
-            end_sequence: false,
-            prologue_end: false,
-            epilogue_begin: false,
-            // "The isa value 0 specifies that the instruction set is the
-            // architecturally determined default instruction set. This may be fixed
-            // by the ABI, or it may be specified by other means, for example, by
-            // the object file description."
-            isa: 0,
-            discriminator: 0,
-        }
-    }
-
-    /// "The program-counter value corresponding to a machine instruction
-    /// generated by the compiler."
-    #[inline]
-    pub fn address(&self) -> u64 {
-        self.address.0
-    }
-
-    /// > An unsigned integer representing the index of an operation within a VLIW
-    /// > instruction. The index of the first operation is 0. For non-VLIW
-    /// > architectures, this register will always be 0.
-    /// >
-    /// > The address and op_index registers, taken together, form an operation
-    /// > pointer that can reference any individual operation with the
-    /// > instruction stream.
-    #[inline]
-    pub fn op_index(&self) -> u64 {
-        self.op_index.0
-    }
-
-    /// "An unsigned integer indicating the identity of the source file
-    /// corresponding to a machine instruction."
-    #[inline]
-    pub fn file_index(&self) -> u64 {
-        self.file
-    }
-
-    /// The source file corresponding to the current machine instruction.
-    #[inline]
-    pub fn file<'header, R: Reader>(
-        &self,
-        header: &'header LineProgramHeader<R>,
-    ) -> Option<&'header FileEntry<R>> {
-        header.file(self.file)
-    }
-
-    /// "An unsigned integer indicating a source line number. Lines are numbered
-    /// beginning at 1. The compiler may emit the value 0 in cases where an
-    /// instruction cannot be attributed to any source line."
-    /// Line number values of 0 are represented as `None`.
-    #[inline]
-    pub fn line(&self) -> Option<NonZeroU64> {
-        NonZeroU64::new(self.line.0)
-    }
-
-    /// "An unsigned integer indicating a column number within a source
-    /// line. Columns are numbered beginning at 1. The value 0 is reserved to
-    /// indicate that a statement begins at the “left edge” of the line."
-    #[inline]
-    pub fn column(&self) -> ColumnType {
-        NonZeroU64::new(self.column)
-            .map(ColumnType::Column)
-            .unwrap_or(ColumnType::LeftEdge)
-    }
-
-    /// "A boolean indicating that the current instruction is a recommended
-    /// breakpoint location. A recommended breakpoint location is intended to
-    /// “represent” a line, a statement and/or a semantically distinct subpart
-    /// of a statement."
-    #[inline]
-    pub fn is_stmt(&self) -> bool {
-        self.is_stmt
-    }
-
-    /// "A boolean indicating that the current instruction is the beginning of a
-    /// basic block."
-    #[inline]
-    pub fn basic_block(&self) -> bool {
-        self.basic_block
-    }
-
-    /// "A boolean indicating that the current address is that of the first byte
-    /// after the end of a sequence of target machine instructions. end_sequence
-    /// terminates a sequence of lines; therefore other information in the same
-    /// row is not meaningful."
-    #[inline]
-    pub fn end_sequence(&self) -> bool {
-        self.end_sequence
-    }
-
-    /// "A boolean indicating that the current address is one (of possibly many)
-    /// where execution should be suspended for an entry breakpoint of a
-    /// function."
-    #[inline]
-    pub fn prologue_end(&self) -> bool {
-        self.prologue_end
-    }
-
-    /// "A boolean indicating that the current address is one (of possibly many)
-    /// where execution should be suspended for an exit breakpoint of a
-    /// function."
-    #[inline]
-    pub fn epilogue_begin(&self) -> bool {
-        self.epilogue_begin
-    }
-
-    /// Tag for the current instruction set architecture.
-    ///
-    /// > An unsigned integer whose value encodes the applicable instruction set
-    /// > architecture for the current instruction.
-    /// >
-    /// > The encoding of instruction sets should be shared by all users of a
-    /// > given architecture. It is recommended that this encoding be defined by
-    /// > the ABI authoring committee for each architecture.
-    #[inline]
-    pub fn isa(&self) -> u64 {
-        self.isa
-    }
-
-    /// "An unsigned integer identifying the block to which the current
-    /// instruction belongs. Discriminator values are assigned arbitrarily by
-    /// the DWARF producer and serve to distinguish among multiple blocks that
-    /// may all be associated with the same source file, line, and column. Where
-    /// only one block exists for a given source position, the discriminator
-    /// value should be zero."
-    #[inline]
-    pub fn discriminator(&self) -> u64 {
-        self.discriminator
-    }
-
-    /// Execute the given instruction, and return true if a new row in the
-    /// line number matrix needs to be generated.
-    ///
-    /// Unknown opcodes are treated as no-ops.
-    #[inline]
-    pub fn execute<R, Program>(
-        &mut self,
-        instruction: LineInstruction<R>,
-        program: &mut Program,
-    ) -> bool
-    where
-        Program: LineProgram<R>,
-        R: Reader,
-    {
-        match instruction {
-            LineInstruction::Special(opcode) => {
-                self.exec_special_opcode(opcode, program.header());
-                true
-            }
-
-            LineInstruction::Copy => true,
-
-            LineInstruction::AdvancePc(operation_advance) => {
-                self.apply_operation_advance(operation_advance, program.header());
-                false
-            }
-
-            LineInstruction::AdvanceLine(line_increment) => {
-                self.apply_line_advance(line_increment);
-                false
-            }
-
-            LineInstruction::SetFile(file) => {
-                self.file = file;
-                false
-            }
-
-            LineInstruction::SetColumn(column) => {
-                self.column = column;
-                false
-            }
-
-            LineInstruction::NegateStatement => {
-                self.is_stmt = !self.is_stmt;
-                false
-            }
-
-            LineInstruction::SetBasicBlock => {
-                self.basic_block = true;
-                false
-            }
-
-            LineInstruction::ConstAddPc => {
-                let adjusted = self.adjust_opcode(255, program.header());
-                let operation_advance = adjusted / program.header().line_encoding.line_range;
-                self.apply_operation_advance(u64::from(operation_advance), program.header());
-                false
-            }
-
-            LineInstruction::FixedAddPc(operand) => {
-                self.address += Wrapping(u64::from(operand));
-                self.op_index.0 = 0;
-                false
-            }
-
-            LineInstruction::SetPrologueEnd => {
-                self.prologue_end = true;
-                false
-            }
-
-            LineInstruction::SetEpilogueBegin => {
-                self.epilogue_begin = true;
-                false
-            }
-
-            LineInstruction::SetIsa(isa) => {
-                self.isa = isa;
-                false
-            }
-
-            LineInstruction::EndSequence => {
-                self.end_sequence = true;
-                true
-            }
-
-            LineInstruction::SetAddress(address) => {
-                let tombstone_address = !0 >> (64 - program.header().encoding.address_size * 8);
-                self.tombstone = address == tombstone_address;
-                self.address.0 = address;
-                self.op_index.0 = 0;
-                false
-            }
-
-            LineInstruction::DefineFile(entry) => {
-                program.add_file(entry);
-                false
-            }
-
-            LineInstruction::SetDiscriminator(discriminator) => {
-                self.discriminator = discriminator;
-                false
-            }
-
-            // Compatibility with future opcodes.
-            LineInstruction::UnknownStandard0(_)
-            | LineInstruction::UnknownStandard1(_, _)
-            | LineInstruction::UnknownStandardN(_, _)
-            | LineInstruction::UnknownExtended(_, _) => false,
-        }
-    }
-
-    /// Perform any reset that was required after copying the previous row.
-    #[inline]
-    pub fn reset<R: Reader>(&mut self, header: &LineProgramHeader<R>) {
-        if self.end_sequence {
-            // Previous instruction was EndSequence, so reset everything
-            // as specified in Section 6.2.5.3.
-            *self = Self::new(header);
-        } else {
-            // Previous instruction was one of:
-            // - Special - specified in Section 6.2.5.1, steps 4-7
-            // - Copy - specified in Section 6.2.5.2
-            // The reset behaviour is the same in both cases.
-            self.discriminator = 0;
-            self.basic_block = false;
-            self.prologue_end = false;
-            self.epilogue_begin = false;
-        }
-    }
-
-    /// Step 1 of section 6.2.5.1
-    fn apply_line_advance(&mut self, line_increment: i64) {
-        if line_increment < 0 {
-            let decrement = -line_increment as u64;
-            if decrement <= self.line.0 {
-                self.line.0 -= decrement;
-            } else {
-                self.line.0 = 0;
-            }
-        } else {
-            self.line += Wrapping(line_increment as u64);
-        }
-    }
-
-    /// Step 2 of section 6.2.5.1
-    fn apply_operation_advance<R: Reader>(
-        &mut self,
-        operation_advance: u64,
-        header: &LineProgramHeader<R>,
-    ) {
-        let operation_advance = Wrapping(operation_advance);
-
-        let minimum_instruction_length = u64::from(header.line_encoding.minimum_instruction_length);
-        let minimum_instruction_length = Wrapping(minimum_instruction_length);
-
-        let maximum_operations_per_instruction =
-            u64::from(header.line_encoding.maximum_operations_per_instruction);
-        let maximum_operations_per_instruction = Wrapping(maximum_operations_per_instruction);
-
-        if maximum_operations_per_instruction.0 == 1 {
-            self.address += minimum_instruction_length * operation_advance;
-            self.op_index.0 = 0;
-        } else {
-            let op_index_with_advance = self.op_index + operation_advance;
-            self.address += minimum_instruction_length
-                * (op_index_with_advance / maximum_operations_per_instruction);
-            self.op_index = op_index_with_advance % maximum_operations_per_instruction;
-        }
-    }
-
-    #[inline]
-    fn adjust_opcode<R: Reader>(&self, opcode: u8, header: &LineProgramHeader<R>) -> u8 {
-        opcode - header.opcode_base
-    }
-
-    /// Section 6.2.5.1
-    fn exec_special_opcode<R: Reader>(&mut self, opcode: u8, header: &LineProgramHeader<R>) {
-        let adjusted_opcode = self.adjust_opcode(opcode, header);
-
-        let line_range = header.line_encoding.line_range;
-        let line_advance = adjusted_opcode % line_range;
-        let operation_advance = adjusted_opcode / line_range;
-
-        // Step 1
-        let line_base = i64::from(header.line_encoding.line_base);
-        self.apply_line_advance(line_base + i64::from(line_advance));
-
-        // Step 2
-        self.apply_operation_advance(u64::from(operation_advance), header);
-    }
-}
-
-/// The type of column that a row is referring to.
-#[derive(Copy, Clone, Debug, PartialEq, Eq, PartialOrd, Ord)]
-pub enum ColumnType {
-    /// The `LeftEdge` means that the statement begins at the start of the new
-    /// line.
-    LeftEdge,
-    /// A column number, whose range begins at 1.
-    Column(NonZeroU64),
-}
-
-/// Deprecated. `LineNumberSequence` has been renamed to `LineSequence`.
-#[deprecated(note = "LineNumberSequence has been renamed to LineSequence, use that instead.")]
-pub type LineNumberSequence<R> = LineSequence<R>;
-
-/// A sequence within a line number program.  A sequence, as defined in section
-/// 6.2.5 of the standard, is a linear subset of a line number program within
-/// which addresses are monotonically increasing.
-#[derive(Clone, Debug)]
-pub struct LineSequence<R: Reader> {
-    /// The first address that is covered by this sequence within the line number
-    /// program.
-    pub start: u64,
-    /// The first address that is *not* covered by this sequence within the line
-    /// number program.
-    pub end: u64,
-    instructions: LineInstructions<R>,
-}
-
-/// Deprecated. `LineNumberProgramHeader` has been renamed to `LineProgramHeader`.
-#[deprecated(
-    note = "LineNumberProgramHeader has been renamed to LineProgramHeader, use that instead."
-)]
-pub type LineNumberProgramHeader<R, Offset> = LineProgramHeader<R, Offset>;
-
-/// A header for a line number program in the `.debug_line` section, as defined
-/// in section 6.2.4 of the standard.
-#[derive(Clone, Debug, Eq, PartialEq)]
-pub struct LineProgramHeader<R, Offset = <R as Reader>::Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    encoding: Encoding,
-    offset: DebugLineOffset<Offset>,
-    unit_length: Offset,
-
-    header_length: Offset,
-
-    line_encoding: LineEncoding,
-
-    /// "The number assigned to the first special opcode."
-    opcode_base: u8,
-
-    /// "This array specifies the number of LEB128 operands for each of the
-    /// standard opcodes. The first element of the array corresponds to the
-    /// opcode whose value is 1, and the last element corresponds to the opcode
-    /// whose value is `opcode_base - 1`."
-    standard_opcode_lengths: R,
-
-    /// "A sequence of directory entry format descriptions."
-    directory_entry_format: Vec<FileEntryFormat>,
-
-    /// > Entries in this sequence describe each path that was searched for
-    /// > included source files in this compilation. (The paths include those
-    /// > directories specified explicitly by the user for the compiler to search
-    /// > and those the compiler searches without explicit direction.) Each path
-    /// > entry is either a full path name or is relative to the current directory
-    /// > of the compilation.
-    /// >
-    /// > The last entry is followed by a single null byte.
-    include_directories: Vec<AttributeValue<R, Offset>>,
-
-    /// "A sequence of file entry format descriptions."
-    file_name_entry_format: Vec<FileEntryFormat>,
-
-    /// "Entries in this sequence describe source files that contribute to the
-    /// line number information for this compilation unit or is used in other
-    /// contexts."
-    file_names: Vec<FileEntry<R, Offset>>,
-
-    /// The encoded line program instructions.
-    program_buf: R,
-
-    /// The current directory of the compilation.
-    comp_dir: Option<R>,
-
-    /// The primary source file.
-    comp_file: Option<FileEntry<R, Offset>>,
-}
-
-impl<R, Offset> LineProgramHeader<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    /// Return the offset of the line number program header in the `.debug_line` section.
-    pub fn offset(&self) -> DebugLineOffset<R::Offset> {
-        self.offset
-    }
-
-    /// Return the length of the line number program and header, not including
-    /// the length of the encoded length itself.
-    pub fn unit_length(&self) -> R::Offset {
-        self.unit_length
-    }
-
-    /// Return the encoding parameters for this header's line program.
-    pub fn encoding(&self) -> Encoding {
-        self.encoding
-    }
-
-    /// Get the version of this header's line program.
-    pub fn version(&self) -> u16 {
-        self.encoding.version
-    }
-
-    /// Get the length of the encoded line number program header, not including
-    /// the length of the encoded length itself.
-    pub fn header_length(&self) -> R::Offset {
-        self.header_length
-    }
-
-    /// Get the size in bytes of a target machine address.
-    pub fn address_size(&self) -> u8 {
-        self.encoding.address_size
-    }
-
-    /// Whether this line program is encoded in 64- or 32-bit DWARF.
-    pub fn format(&self) -> Format {
-        self.encoding.format
-    }
-
-    /// Get the line encoding parameters for this header's line program.
-    pub fn line_encoding(&self) -> LineEncoding {
-        self.line_encoding
-    }
-
-    /// Get the minimum instruction length any instruction in this header's line
-    /// program may have.
-    pub fn minimum_instruction_length(&self) -> u8 {
-        self.line_encoding.minimum_instruction_length
-    }
-
-    /// Get the maximum number of operations each instruction in this header's
-    /// line program may have.
-    pub fn maximum_operations_per_instruction(&self) -> u8 {
-        self.line_encoding.maximum_operations_per_instruction
-    }
-
-    /// Get the default value of the `is_stmt` register for this header's line
-    /// program.
-    pub fn default_is_stmt(&self) -> bool {
-        self.line_encoding.default_is_stmt
-    }
-
-    /// Get the line base for this header's line program.
-    pub fn line_base(&self) -> i8 {
-        self.line_encoding.line_base
-    }
-
-    /// Get the line range for this header's line program.
-    pub fn line_range(&self) -> u8 {
-        self.line_encoding.line_range
-    }
-
-    /// Get opcode base for this header's line program.
-    pub fn opcode_base(&self) -> u8 {
-        self.opcode_base
-    }
-
-    /// An array of `u8` that specifies the number of LEB128 operands for
-    /// each of the standard opcodes.
-    pub fn standard_opcode_lengths(&self) -> &R {
-        &self.standard_opcode_lengths
-    }
-
-    /// Get the format of a directory entry.
-    pub fn directory_entry_format(&self) -> &[FileEntryFormat] {
-        &self.directory_entry_format[..]
-    }
-
-    /// Get the set of include directories for this header's line program.
-    ///
-    /// For DWARF version <= 4, the compilation's current directory is not included
-    /// in the return value, but is implicitly considered to be in the set per spec.
-    pub fn include_directories(&self) -> &[AttributeValue<R, Offset>] {
-        &self.include_directories[..]
-    }
-
-    /// The include directory with the given directory index.
-    ///
-    /// A directory index of 0 corresponds to the compilation unit directory.
-    pub fn directory(&self, directory: u64) -> Option<AttributeValue<R, Offset>> {
-        if self.encoding.version <= 4 {
-            if directory == 0 {
-                self.comp_dir.clone().map(AttributeValue::String)
-            } else {
-                let directory = directory as usize - 1;
-                self.include_directories.get(directory).cloned()
-            }
-        } else {
-            self.include_directories.get(directory as usize).cloned()
-        }
-    }
-
-    /// Get the format of a file name entry.
-    pub fn file_name_entry_format(&self) -> &[FileEntryFormat] {
-        &self.file_name_entry_format[..]
-    }
-
-    /// Return true if the file entries may have valid timestamps.
-    ///
-    /// Only returns false if we definitely know that all timestamp fields
-    /// are invalid.
-    pub fn file_has_timestamp(&self) -> bool {
-        self.encoding.version <= 4
-            || self
-                .file_name_entry_format
-                .iter()
-                .any(|x| x.content_type == constants::DW_LNCT_timestamp)
-    }
-
-    /// Return true if the file entries may have valid sizes.
-    ///
-    /// Only returns false if we definitely know that all size fields
-    /// are invalid.
-    pub fn file_has_size(&self) -> bool {
-        self.encoding.version <= 4
-            || self
-                .file_name_entry_format
-                .iter()
-                .any(|x| x.content_type == constants::DW_LNCT_size)
-    }
-
-    /// Return true if the file name entry format contains an MD5 field.
-    pub fn file_has_md5(&self) -> bool {
-        self.file_name_entry_format
-            .iter()
-            .any(|x| x.content_type == constants::DW_LNCT_MD5)
-    }
-
-    /// Get the list of source files that appear in this header's line program.
-    pub fn file_names(&self) -> &[FileEntry<R, Offset>] {
-        &self.file_names[..]
-    }
-
-    /// The source file with the given file index.
-    ///
-    /// A file index of 0 corresponds to the compilation unit file.
-    /// Note that a file index of 0 is invalid for DWARF version <= 4,
-    /// but we support it anyway.
-    pub fn file(&self, file: u64) -> Option<&FileEntry<R, Offset>> {
-        if self.encoding.version <= 4 {
-            if file == 0 {
-                self.comp_file.as_ref()
-            } else {
-                let file = file as usize - 1;
-                self.file_names.get(file)
-            }
-        } else {
-            self.file_names.get(file as usize)
-        }
-    }
-
-    /// Get the raw, un-parsed `EndianSlice` containing this header's line number
-    /// program.
-    ///
-    /// ```
-    /// # fn foo() {
-    /// use gimli::{LineProgramHeader, EndianSlice, NativeEndian};
-    ///
-    /// fn get_line_number_program_header<'a>() -> LineProgramHeader<EndianSlice<'a, NativeEndian>> {
-    ///     // Get a line number program header from some offset in a
-    ///     // `.debug_line` section...
-    /// #   unimplemented!()
-    /// }
-    ///
-    /// let header = get_line_number_program_header();
-    /// let raw_program = header.raw_program_buf();
-    /// println!("The length of the raw program in bytes is {}", raw_program.len());
-    /// # }
-    /// ```
-    pub fn raw_program_buf(&self) -> R {
-        self.program_buf.clone()
-    }
-
-    /// Iterate over the instructions in this header's line number program, parsing
-    /// them as we go.
-    pub fn instructions(&self) -> LineInstructions<R> {
-        LineInstructions {
-            input: self.program_buf.clone(),
-        }
-    }
-
-    fn parse(
-        input: &mut R,
-        offset: DebugLineOffset<Offset>,
-        mut address_size: u8,
-        mut comp_dir: Option<R>,
-        comp_name: Option<R>,
-    ) -> Result<LineProgramHeader<R, Offset>> {
-        let (unit_length, format) = input.read_initial_length()?;
-        let rest = &mut input.split(unit_length)?;
-
-        let version = rest.read_u16()?;
-        if version < 2 || version > 5 {
-            return Err(Error::UnknownVersion(u64::from(version)));
-        }
-
-        if version >= 5 {
-            address_size = rest.read_u8()?;
-            let segment_selector_size = rest.read_u8()?;
-            if segment_selector_size != 0 {
-                return Err(Error::UnsupportedSegmentSize);
-            }
-        }
-
-        let encoding = Encoding {
-            format,
-            version,
-            address_size,
-        };
-
-        let header_length = rest.read_length(format)?;
-
-        let mut program_buf = rest.clone();
-        program_buf.skip(header_length)?;
-        rest.truncate(header_length)?;
-
-        let minimum_instruction_length = rest.read_u8()?;
-        if minimum_instruction_length == 0 {
-            return Err(Error::MinimumInstructionLengthZero);
-        }
-
-        // This field did not exist before DWARF 4, but is specified to be 1 for
-        // non-VLIW architectures, which makes it a no-op.
-        let maximum_operations_per_instruction = if version >= 4 { rest.read_u8()? } else { 1 };
-        if maximum_operations_per_instruction == 0 {
-            return Err(Error::MaximumOperationsPerInstructionZero);
-        }
-
-        let default_is_stmt = rest.read_u8()? != 0;
-        let line_base = rest.read_i8()?;
-        let line_range = rest.read_u8()?;
-        if line_range == 0 {
-            return Err(Error::LineRangeZero);
-        }
-        let line_encoding = LineEncoding {
-            minimum_instruction_length,
-            maximum_operations_per_instruction,
-            default_is_stmt,
-            line_base,
-            line_range,
-        };
-
-        let opcode_base = rest.read_u8()?;
-        if opcode_base == 0 {
-            return Err(Error::OpcodeBaseZero);
-        }
-
-        let standard_opcode_count = R::Offset::from_u8(opcode_base - 1);
-        let standard_opcode_lengths = rest.split(standard_opcode_count)?;
-
-        let directory_entry_format;
-        let mut include_directories = Vec::new();
-        if version <= 4 {
-            directory_entry_format = Vec::new();
-            loop {
-                let directory = rest.read_null_terminated_slice()?;
-                if directory.is_empty() {
-                    break;
-                }
-                include_directories.push(AttributeValue::String(directory));
-            }
-        } else {
-            comp_dir = None;
-            directory_entry_format = FileEntryFormat::parse(rest)?;
-            let count = rest.read_uleb128()?;
-            for _ in 0..count {
-                include_directories.push(parse_directory_v5(
-                    rest,
-                    encoding,
-                    &directory_entry_format,
-                )?);
-            }
-        }
-
-        let comp_file;
-        let file_name_entry_format;
-        let mut file_names = Vec::new();
-        if version <= 4 {
-            comp_file = comp_name.map(|name| FileEntry {
-                path_name: AttributeValue::String(name),
-                directory_index: 0,
-                timestamp: 0,
-                size: 0,
-                md5: [0; 16],
-            });
-
-            file_name_entry_format = Vec::new();
-            loop {
-                let path_name = rest.read_null_terminated_slice()?;
-                if path_name.is_empty() {
-                    break;
-                }
-                file_names.push(FileEntry::parse(rest, path_name)?);
-            }
-        } else {
-            comp_file = None;
-            file_name_entry_format = FileEntryFormat::parse(rest)?;
-            let count = rest.read_uleb128()?;
-            for _ in 0..count {
-                file_names.push(parse_file_v5(rest, encoding, &file_name_entry_format)?);
-            }
-        }
-
-        let header = LineProgramHeader {
-            encoding,
-            offset,
-            unit_length,
-            header_length,
-            line_encoding,
-            opcode_base,
-            standard_opcode_lengths,
-            directory_entry_format,
-            include_directories,
-            file_name_entry_format,
-            file_names,
-            program_buf,
-            comp_dir,
-            comp_file,
-        };
-        Ok(header)
-    }
-}
-
-/// Deprecated. `IncompleteLineNumberProgram` has been renamed to `IncompleteLineProgram`.
-#[deprecated(
-    note = "IncompleteLineNumberProgram has been renamed to IncompleteLineProgram, use that instead."
-)]
-pub type IncompleteLineNumberProgram<R, Offset> = IncompleteLineProgram<R, Offset>;
-
-/// A line number program that has not been run to completion.
-#[derive(Clone, Debug, Eq, PartialEq)]
-pub struct IncompleteLineProgram<R, Offset = <R as Reader>::Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    header: LineProgramHeader<R, Offset>,
-}
-
-impl<R, Offset> IncompleteLineProgram<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    /// Retrieve the `LineProgramHeader` for this program.
-    pub fn header(&self) -> &LineProgramHeader<R, Offset> {
-        &self.header
-    }
-
-    /// Construct a new `LineRows` for executing this program to iterate
-    /// over rows in the line information matrix.
-    pub fn rows(self) -> OneShotLineRows<R, Offset> {
-        OneShotLineRows::new(self)
-    }
-
-    /// Execute the line number program, completing the `IncompleteLineProgram`
-    /// into a `CompleteLineProgram` and producing an array of sequences within
-    /// the line number program that can later be used with
-    /// `CompleteLineProgram::resume_from`.
-    ///
-    /// ```
-    /// # fn foo() {
-    /// use gimli::{IncompleteLineProgram, EndianSlice, NativeEndian};
-    ///
-    /// fn get_line_number_program<'a>() -> IncompleteLineProgram<EndianSlice<'a, NativeEndian>> {
-    ///     // Get a line number program from some offset in a
-    ///     // `.debug_line` section...
-    /// #   unimplemented!()
-    /// }
-    ///
-    /// let program = get_line_number_program();
-    /// let (program, sequences) = program.sequences().unwrap();
-    /// println!("There are {} sequences in this line number program", sequences.len());
-    /// # }
-    /// ```
-    #[allow(clippy::type_complexity)]
-    pub fn sequences(self) -> Result<(CompleteLineProgram<R, Offset>, Vec<LineSequence<R>>)> {
-        let mut sequences = Vec::new();
-        let mut rows = self.rows();
-        let mut instructions = rows.instructions.clone();
-        let mut sequence_start_addr = None;
-        loop {
-            let sequence_end_addr;
-            if rows.next_row()?.is_none() {
-                break;
-            }
-
-            let row = &rows.row;
-            if row.end_sequence() {
-                sequence_end_addr = row.address();
-            } else if sequence_start_addr.is_none() {
-                sequence_start_addr = Some(row.address());
-                continue;
-            } else {
-                continue;
-            }
-
-            // We just finished a sequence.
-            sequences.push(LineSequence {
-                // In theory one could have multiple DW_LNE_end_sequence instructions
-                // in a row.
-                start: sequence_start_addr.unwrap_or(0),
-                end: sequence_end_addr,
-                instructions: instructions.remove_trailing(&rows.instructions)?,
-            });
-            sequence_start_addr = None;
-            instructions = rows.instructions.clone();
-        }
-
-        let program = CompleteLineProgram {
-            header: rows.program.header,
-        };
-        Ok((program, sequences))
-    }
-}
-
-/// Deprecated. `CompleteLineNumberProgram` has been renamed to `CompleteLineProgram`.
-#[deprecated(
-    note = "CompleteLineNumberProgram has been renamed to CompleteLineProgram, use that instead."
-)]
-pub type CompleteLineNumberProgram<R, Offset> = CompleteLineProgram<R, Offset>;
-
-/// A line number program that has previously been run to completion.
-#[derive(Clone, Debug, Eq, PartialEq)]
-pub struct CompleteLineProgram<R, Offset = <R as Reader>::Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    header: LineProgramHeader<R, Offset>,
-}
-
-impl<R, Offset> CompleteLineProgram<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    /// Retrieve the `LineProgramHeader` for this program.
-    pub fn header(&self) -> &LineProgramHeader<R, Offset> {
-        &self.header
-    }
-
-    /// Construct a new `LineRows` for executing the subset of the line
-    /// number program identified by 'sequence' and  generating the line information
-    /// matrix.
-    ///
-    /// ```
-    /// # fn foo() {
-    /// use gimli::{IncompleteLineProgram, EndianSlice, NativeEndian};
-    ///
-    /// fn get_line_number_program<'a>() -> IncompleteLineProgram<EndianSlice<'a, NativeEndian>> {
-    ///     // Get a line number program from some offset in a
-    ///     // `.debug_line` section...
-    /// #   unimplemented!()
-    /// }
-    ///
-    /// let program = get_line_number_program();
-    /// let (program, sequences) = program.sequences().unwrap();
-    /// for sequence in &sequences {
-    ///     let mut sm = program.resume_from(sequence);
-    /// }
-    /// # }
-    /// ```
-    pub fn resume_from<'program>(
-        &'program self,
-        sequence: &LineSequence<R>,
-    ) -> ResumedLineRows<'program, R, Offset> {
-        ResumedLineRows::resume(self, sequence)
-    }
-}
-
-/// An entry in the `LineProgramHeader`'s `file_names` set.
-#[derive(Copy, Clone, Debug, PartialEq, Eq)]
-pub struct FileEntry<R, Offset = <R as Reader>::Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    path_name: AttributeValue<R, Offset>,
-    directory_index: u64,
-    timestamp: u64,
-    size: u64,
-    md5: [u8; 16],
-}
-
-impl<R, Offset> FileEntry<R, Offset>
-where
-    R: Reader<Offset = Offset>,
-    Offset: ReaderOffset,
-{
-    // version 2-4
-    fn parse(input: &mut R, path_name: R) -> Result<FileEntry<R, Offset>> {
-        let directory_index = input.read_uleb128()?;
-        let timestamp = input.read_uleb128()?;
-        let size = input.read_uleb128()?;
-
-        let entry = FileEntry {
-            path_name: AttributeValue::String(path_name),
-            directory_index,
-            timestamp,
-            size,
-            md5: [0; 16],
-        };
-
-        Ok(entry)
-    }
-
-    /// > A slice containing the full or relative path name of
-    /// > a source file. If the entry contains a file name or a relative path
-    /// > name, the file is located relative to either the compilation directory
-    /// > (as specified by the DW_AT_comp_dir attribute given in the compilation
-    /// > unit) or one of the directories in the include_directories section.
-    pub fn path_name(&self) -> AttributeValue<R, Offset> {
-        self.path_name.clone()
-    }
-
-    /// > An unsigned LEB128 number representing the directory index of the
-    /// > directory in which the file was found.
-    /// >
-    /// > ...
-    /// >
-    /// > The directory index represents an entry in the include_directories
-    /// > section of the line number program header. The index is 0 if the file
-    /// > was found in the current directory of the compilation, 1 if it was found
-    /// > in the first directory in the include_directories section, and so
-    /// > on. The directory index is ignored for file names that represent full
-    /// > path names.
-    pub fn directory_index(&self) -> u64 {
-        self.directory_index
-    }
-
-    /// Get this file's directory.
-    ///
-    /// A directory index of 0 corresponds to the compilation unit directory.
-    pub fn directory(&self, header: &LineProgramHeader<R>) -> Option<AttributeValue<R, Offset>> {
-        header.directory(self.directory_index)
-    }
-
-    /// The implementation-defined time of last modification of the file,
-    /// or 0 if not available.
-    pub fn timestamp(&self) -> u64 {
-        self.timestamp
-    }
-
-    /// "An unsigned LEB128 number representing the time of last modification of
-    /// the file, or 0 if not available."
-    // Terminology changed in DWARF version 5.
-    #[doc(hidden)]
-    pub fn last_modification(&self) -> u64 {
-        self.timestamp
-    }
-
-    /// The size of the file in bytes, or 0 if not available.
-    pub fn size(&self) -> u64 {
-        self.size
-    }
-
-    /// "An unsigned LEB128 number representing the length in bytes of the file,
-    /// or 0 if not available."
-    // Terminology changed in DWARF version 5.
-    #[doc(hidden)]
-    pub fn length(&self) -> u64 {
-        self.size
-    }
-
-    /// A 16-byte MD5 digest of the file contents.
-    ///
-    /// Only valid if `LineProgramHeader::file_has_md5` returns `true`.
-    pub fn md5(&self) -> &[u8; 16] {
-        &self.md5
-    }
-}
-
-/// The format of a component of an include directory or file name entry.
-#[derive(Copy, Clone, Debug, PartialEq, Eq)]
-pub struct FileEntryFormat {
-    /// The type of information that is represented by the component.
-    pub content_type: constants::DwLnct,
-
-    /// The encoding form of the component value.
-    pub form: constants::DwForm,
-}
-
-impl FileEntryFormat {
-    fn parse<R: Reader>(input: &mut R) -> Result<Vec<FileEntryFormat>> {
-        let format_count = input.read_u8()? as usize;
-        let mut format = Vec::with_capacity(format_count);
-        let mut path_count = 0;
-        for _ in 0..format_count {
-            let content_type = input.read_uleb128()?;
-            let content_type = if content_type > u64::from(u16::max_value()) {
-                constants::DwLnct(u16::max_value())
-            } else {
-                constants::DwLnct(content_type as u16)
-            };
-            if content_type == constants::DW_LNCT_path {
-                path_count += 1;
-            }
-
-            let form = constants::DwForm(input.read_uleb128_u16()?);
-
-            format.push(FileEntryFormat { content_type, form });
-        }
-        if path_count != 1 {
-            return Err(Error::MissingFileEntryFormatPath);
-        }
-        Ok(format)
-    }
-}
-
-fn parse_directory_v5<R: Reader>(
-    input: &mut R,
-    encoding: Encoding,
-    formats: &[FileEntryFormat],
-) -> Result<AttributeValue<R>> {
-    let mut path_name = None;
-
-    for format in formats {
-        let value = parse_attribute(input, encoding, format.form)?;
-        if format.content_type == constants::DW_LNCT_path {
-            path_name = Some(value);
-        }
-    }
-
-    Ok(path_name.unwrap())
-}
-
-fn parse_file_v5<R: Reader>(
-    input: &mut R,
-    encoding: Encoding,
-    formats: &[FileEntryFormat],
-) -> Result<FileEntry<R>> {
-    let mut path_name = None;
-    let mut directory_index = 0;
-    let mut timestamp = 0;
-    let mut size = 0;
-    let mut md5 = [0; 16];
-
-    for format in formats {
-        let value = parse_attribute(input, encoding, format.form)?;
-        match format.content_type {
-            constants::DW_LNCT_path => path_name = Some(value),
-            constants::DW_LNCT_directory_index => {
-                if let Some(value) = value.udata_value() {
-                    directory_index = value;
-                }
-            }
-            constants::DW_LNCT_timestamp => {
-                if let Some(value) = value.udata_value() {
-                    timestamp = value;
-                }
-            }
-            constants::DW_LNCT_size => {
-                if let Some(value) = value.udata_value() {
-                    size = value;
-                }
-            }
-            constants::DW_LNCT_MD5 => {
-                if let AttributeValue::Block(mut value) = value {
-                    if value.len().into_u64() == 16 {
-                        md5 = value.read_u8_array()?;
-                    }
-                }
-            }
-            // Ignore unknown content types.
-            _ => {}
-        }
-    }
-
-    Ok(FileEntry {
-        path_name: path_name.unwrap(),
-        directory_index,
-        timestamp,
-        size,
-        md5,
-    })
-}
-
-// TODO: this should be shared with unit::parse_attribute(), but that is hard to do.
-fn parse_attribute<R: Reader>(
-    input: &mut R,
-    encoding: Encoding,
-    form: constants::DwForm,
-) -> Result<AttributeValue<R>> {
-    Ok(match form {
-        constants::DW_FORM_block1 => {
-            let len = input.read_u8().map(R::Offset::from_u8)?;
-            let block = input.split(len)?;
-            AttributeValue::Block(block)
-        }
-        constants::DW_FORM_block2 => {
-            let len = input.read_u16().map(R::Offset::from_u16)?;
-            let block = input.split(len)?;
-            AttributeValue::Block(block)
-        }
-        constants::DW_FORM_block4 => {
-            let len = input.read_u32().map(R::Offset::from_u32)?;
-            let block = input.split(len)?;
-            AttributeValue::Block(block)
-        }
-        constants::DW_FORM_block => {
-            let len = input.read_uleb128().and_then(R::Offset::from_u64)?;
-            let block = input.split(len)?;
-            AttributeValue::Block(block)
-        }
-        constants::DW_FORM_data1 => {
-            let data = input.read_u8()?;
-            AttributeValue::Data1(data)
-        }
-        constants::DW_FORM_data2 => {
-            let data = input.read_u16()?;
-            AttributeValue::Data2(data)
-        }
-        constants::DW_FORM_data4 => {
-            let data = input.read_u32()?;
-            AttributeValue::Data4(data)
-        }
-        constants::DW_FORM_data8 => {
-            let data = input.read_u64()?;
-            AttributeValue::Data8(data)
-        }
-        constants::DW_FORM_data16 => {
-            let block = input.split(R::Offset::from_u8(16))?;
-            AttributeValue::Block(block)
-        }
-        constants::DW_FORM_udata => {
-            let data = input.read_uleb128()?;
-            AttributeValue::Udata(data)
-        }
-        constants::DW_FORM_sdata => {
-            let data = input.read_sleb128()?;
-            AttributeValue::Sdata(data)
-        }
-        constants::DW_FORM_flag => {
-            let present = input.read_u8()?;
-            AttributeValue::Flag(present != 0)
-        }
-        constants::DW_FORM_sec_offset => {
-            let offset = input.read_offset(encoding.format)?;
-            AttributeValue::SecOffset(offset)
-        }
-        constants::DW_FORM_string => {
-            let string = input.read_null_terminated_slice()?;
-            AttributeValue::String(string)
-        }
-        constants::DW_FORM_strp => {
-            let offset = input.read_offset(encoding.format)?;
-            AttributeValue::DebugStrRef(DebugStrOffset(offset))
-        }
-        constants::DW_FORM_strp_sup | constants::DW_FORM_GNU_strp_alt => {
-            let offset = input.read_offset(encoding.format)?;
-            AttributeValue::DebugStrRefSup(DebugStrOffset(offset))
-        }
-        constants::DW_FORM_line_strp => {
-            let offset = input.read_offset(encoding.format)?;
-            AttributeValue::DebugLineStrRef(DebugLineStrOffset(offset))
-        }
-        constants::DW_FORM_strx | constants::DW_FORM_GNU_str_index => {
-            let index = input.read_uleb128().and_then(R::Offset::from_u64)?;
-            AttributeValue::DebugStrOffsetsIndex(DebugStrOffsetsIndex(index))
-        }
-        constants::DW_FORM_strx1 => {
-            let index = input.read_u8().map(R::Offset::from_u8)?;
-            AttributeValue::DebugStrOffsetsIndex(DebugStrOffsetsIndex(index))
-        }
-        constants::DW_FORM_strx2 => {
-            let index = input.read_u16().map(R::Offset::from_u16)?;
-            AttributeValue::DebugStrOffsetsIndex(DebugStrOffsetsIndex(index))
-        }
-        constants::DW_FORM_strx3 => {
-            let index = input.read_uint(3).and_then(R::Offset::from_u64)?;
-            AttributeValue::DebugStrOffsetsIndex(DebugStrOffsetsIndex(index))
-        }
-        constants::DW_FORM_strx4 => {
-            let index = input.read_u32().map(R::Offset::from_u32)?;
-            AttributeValue::DebugStrOffsetsIndex(DebugStrOffsetsIndex(index))
-        }
-        _ => {
-            return Err(Error::UnknownForm);
-        }
-    })
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use crate::constants;
-    use crate::endianity::LittleEndian;
-    use crate::read::{EndianSlice, Error};
-    use crate::test_util::GimliSectionMethods;
-    use core::u64;
-    use core::u8;
-    use test_assembler::{Endian, Label, LabelMaker, Section};
-
-    #[test]
-    fn test_parse_debug_line_32_ok() {
-        #[rustfmt::skip]
-        let buf = [
-            // 32-bit length = 62.
-            0x3e, 0x00, 0x00, 0x00,
-            // Version.
-            0x04, 0x00,
-            // Header length = 40.
-            0x28, 0x00, 0x00, 0x00,
-            // Minimum instruction length.
-            0x01,
-            // Maximum operations per byte.
-            0x01,
-            // Default is_stmt.
-            0x01,
-            // Line base.
-            0x00,
-            // Line range.
-            0x01,
-            // Opcode base.
-            0x03,
-            // Standard opcode lengths for opcodes 1 .. opcode base - 1.
-            0x01, 0x02,
-            // Include directories = '/', 'i', 'n', 'c', '\0', '/', 'i', 'n', 'c', '2', '\0', '\0'
-            0x2f, 0x69, 0x6e, 0x63, 0x00, 0x2f, 0x69, 0x6e, 0x63, 0x32, 0x00, 0x00,
-            // File names
-                // foo.rs
-                0x66, 0x6f, 0x6f, 0x2e, 0x72, 0x73, 0x00,
-                0x00,
-                0x00,
-                0x00,
-                // bar.h
-                0x62, 0x61, 0x72, 0x2e, 0x68, 0x00,
-                0x01,
-                0x00,
-                0x00,
-            // End file names.
-            0x00,
-
-            // Dummy line program data.
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-
-            // Dummy next line program.
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-        ];
-
-        let rest = &mut EndianSlice::new(&buf, LittleEndian);
-        let comp_dir = EndianSlice::new(b"/comp_dir", LittleEndian);
-        let comp_name = EndianSlice::new(b"/comp_name", LittleEndian);
-
-        let header =
-            LineProgramHeader::parse(rest, DebugLineOffset(0), 4, Some(comp_dir), Some(comp_name))
-                .expect("should parse header ok");
-
-        assert_eq!(
-            *rest,
-            EndianSlice::new(&buf[buf.len() - 16..], LittleEndian)
-        );
-
-        assert_eq!(header.offset, DebugLineOffset(0));
-        assert_eq!(header.version(), 4);
-        assert_eq!(header.minimum_instruction_length(), 1);
-        assert_eq!(header.maximum_operations_per_instruction(), 1);
-        assert_eq!(header.default_is_stmt(), true);
-        assert_eq!(header.line_base(), 0);
-        assert_eq!(header.line_range(), 1);
-        assert_eq!(header.opcode_base(), 3);
-        assert_eq!(header.directory(0), Some(AttributeValue::String(comp_dir)));
-        assert_eq!(
-            header.file(0).unwrap().path_name,
-            AttributeValue::String(comp_name)
-        );
-
-        let expected_lengths = [1, 2];
-        assert_eq!(header.standard_opcode_lengths().slice(), &expected_lengths);
-
-        let expected_include_directories = [
-            AttributeValue::String(EndianSlice::new(b"/inc", LittleEndian)),
-            AttributeValue::String(EndianSlice::new(b"/inc2", LittleEndian)),
-        ];
-        assert_eq!(header.include_directories(), &expected_include_directories);
-
-        let expected_file_names = [
-            FileEntry {
-                path_name: AttributeValue::String(EndianSlice::new(b"foo.rs", LittleEndian)),
-                directory_index: 0,
-                timestamp: 0,
-                size: 0,
-                md5: [0; 16],
-            },
-            FileEntry {
-                path_name: AttributeValue::String(EndianSlice::new(b"bar.h", LittleEndian)),
-                directory_index: 1,
-                timestamp: 0,
-                size: 0,
-                md5: [0; 16],
-            },
-        ];
-        assert_eq!(&*header.file_names(), &expected_file_names);
-    }
-
-    #[test]
-    fn test_parse_debug_line_header_length_too_short() {
-        #[rustfmt::skip]
-        let buf = [
-            // 32-bit length = 62.
-            0x3e, 0x00, 0x00, 0x00,
-            // Version.
-            0x04, 0x00,
-            // Header length = 20. TOO SHORT!!!
-            0x15, 0x00, 0x00, 0x00,
-            // Minimum instruction length.
-            0x01,
-            // Maximum operations per byte.
-            0x01,
-            // Default is_stmt.
-            0x01,
-            // Line base.
-            0x00,
-            // Line range.
-            0x01,
-            // Opcode base.
-            0x03,
-            // Standard opcode lengths for opcodes 1 .. opcode base - 1.
-            0x01, 0x02,
-            // Include directories = '/', 'i', 'n', 'c', '\0', '/', 'i', 'n', 'c', '2', '\0', '\0'
-            0x2f, 0x69, 0x6e, 0x63, 0x00, 0x2f, 0x69, 0x6e, 0x63, 0x32, 0x00, 0x00,
-            // File names
-                // foo.rs
-                0x66, 0x6f, 0x6f, 0x2e, 0x72, 0x73, 0x00,
-                0x00,
-                0x00,
-                0x00,
-                // bar.h
-                0x62, 0x61, 0x72, 0x2e, 0x68, 0x00,
-                0x01,
-                0x00,
-                0x00,
-            // End file names.
-            0x00,
-
-            // Dummy line program data.
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-
-            // Dummy next line program.
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-        ];
-
-        let input = &mut EndianSlice::new(&buf, LittleEndian);
-
-        match LineProgramHeader::parse(input, DebugLineOffset(0), 4, None, None) {
-            Err(Error::UnexpectedEof(_)) => return,
-            otherwise => panic!("Unexpected result: {:?}", otherwise),
-        }
-    }
-
-    #[test]
-    fn test_parse_debug_line_unit_length_too_short() {
-        #[rustfmt::skip]
-        let buf = [
-            // 32-bit length = 40. TOO SHORT!!!
-            0x28, 0x00, 0x00, 0x00,
-            // Version.
-            0x04, 0x00,
-            // Header length = 40.
-            0x28, 0x00, 0x00, 0x00,
-            // Minimum instruction length.
-            0x01,
-            // Maximum operations per byte.
-            0x01,
-            // Default is_stmt.
-            0x01,
-            // Line base.
-            0x00,
-            // Line range.
-            0x01,
-            // Opcode base.
-            0x03,
-            // Standard opcode lengths for opcodes 1 .. opcode base - 1.
-            0x01, 0x02,
-            // Include directories = '/', 'i', 'n', 'c', '\0', '/', 'i', 'n', 'c', '2', '\0', '\0'
-            0x2f, 0x69, 0x6e, 0x63, 0x00, 0x2f, 0x69, 0x6e, 0x63, 0x32, 0x00, 0x00,
-            // File names
-                // foo.rs
-                0x66, 0x6f, 0x6f, 0x2e, 0x72, 0x73, 0x00,
-                0x00,
-                0x00,
-                0x00,
-                // bar.h
-                0x62, 0x61, 0x72, 0x2e, 0x68, 0x00,
-                0x01,
-                0x00,
-                0x00,
-            // End file names.
-            0x00,
-
-            // Dummy line program data.
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-
-            // Dummy next line program.
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00,
-        ];
-
-        let input = &mut EndianSlice::new(&buf, LittleEndian);
-
-        match LineProgramHeader::parse(input, DebugLineOffset(0), 4, None, None) {
-            Err(Error::UnexpectedEof(_)) => return,
-            otherwise => panic!("Unexpected result: {:?}", otherwise),
-        }
-    }
-
-    const OPCODE_BASE: u8 = 13;
-    const STANDARD_OPCODE_LENGTHS: &[u8] = &[0, 1, 1, 1, 1, 0, 0, 0, 1, 0, 0, 1];
-
-    fn make_test_header(
-        buf: EndianSlice<LittleEndian>,
-    ) -> LineProgramHeader<EndianSlice<LittleEndian>> {
-        let encoding = Encoding {
-            format: Format::Dwarf32,
-            version: 4,
-            address_size: 8,
-        };
-        let line_encoding = LineEncoding {
-            line_base: -3,
-            line_range: 12,
-            ..Default::default()
-        };
-        LineProgramHeader {
-            encoding,
-            offset: DebugLineOffset(0),
-            unit_length: 1,
-            header_length: 1,
-            line_encoding,
-            opcode_base: OPCODE_BASE,
-            standard_opcode_lengths: EndianSlice::new(STANDARD_OPCODE_LENGTHS, LittleEndian),
-            file_names: vec![
-                FileEntry {
-                    path_name: AttributeValue::String(EndianSlice::new(b"foo.c", LittleEndian)),
-                    directory_index: 0,
-                    timestamp: 0,
-                    size: 0,
-                    md5: [0; 16],
-                },
-                FileEntry {
-                    path_name: AttributeValue::String(EndianSlice::new(b"bar.rs", LittleEndian)),
-                    directory_index: 0,
-                    timestamp: 0,
-                    size: 0,
-                    md5: [0; 16],
-                },
-            ],
-            include_directories: vec![],
-            directory_entry_format: vec![],
-            file_name_entry_format: vec![],
-            program_buf: buf,
-            comp_dir: None,
-            comp_file: None,
-        }
-    }
-
-    fn make_test_program(
-        buf: EndianSlice<LittleEndian>,
-    ) -> IncompleteLineProgram<EndianSlice<LittleEndian>> {
-        IncompleteLineProgram {
-            header: make_test_header(buf),
-        }
-    }
-
-    #[test]
-    fn test_parse_special_opcodes() {
-        for i in OPCODE_BASE..u8::MAX {
-            let input = [i, 0, 0, 0];
-            let input = EndianSlice::new(&input, LittleEndian);
-            let header = make_test_header(input);
-
-            let mut rest = input;
-            let opcode =
-                LineInstruction::parse(&header, &mut rest).expect("Should parse the opcode OK");
-
-            assert_eq!(*rest, *input.range_from(1..));
-            assert_eq!(opcode, LineInstruction::Special(i));
-        }
-    }
-
-    #[test]
-    fn test_parse_standard_opcodes() {
-        fn test<Operands>(
-            raw: constants::DwLns,
-            operands: Operands,
-            expected: LineInstruction<EndianSlice<LittleEndian>>,
-        ) where
-            Operands: AsRef<[u8]>,
-        {
-            let mut input = Vec::new();
-            input.push(raw.0);
-            input.extend_from_slice(operands.as_ref());
-
-            let expected_rest = [0, 1, 2, 3, 4];
-            input.extend_from_slice(&expected_rest);
-
-            let input = EndianSlice::new(&*input, LittleEndian);
-            let header = make_test_header(input);
-
-            let mut rest = input;
-            let opcode =
-                LineInstruction::parse(&header, &mut rest).expect("Should parse the opcode OK");
-
-            assert_eq!(opcode, expected);
-            assert_eq!(*rest, expected_rest);
-        }
-
-        test(constants::DW_LNS_copy, [], LineInstruction::Copy);
-        test(
-            constants::DW_LNS_advance_pc,
-            [42],
-            LineInstruction::AdvancePc(42),
-        );
-        test(
-            constants::DW_LNS_advance_line,
-            [9],
-            LineInstruction::AdvanceLine(9),
-        );
-        test(constants::DW_LNS_set_file, [7], LineInstruction::SetFile(7));
-        test(
-            constants::DW_LNS_set_column,
-            [1],
-            LineInstruction::SetColumn(1),
-        );
-        test(
-            constants::DW_LNS_negate_stmt,
-            [],
-            LineInstruction::NegateStatement,
-        );
-        test(
-            constants::DW_LNS_set_basic_block,
-            [],
-            LineInstruction::SetBasicBlock,
-        );
-        test(
-            constants::DW_LNS_const_add_pc,
-            [],
-            LineInstruction::ConstAddPc,
-        );
-        test(
-            constants::DW_LNS_fixed_advance_pc,
-            [42, 0],
-            LineInstruction::FixedAddPc(42),
-        );
-        test(
-            constants::DW_LNS_set_prologue_end,
-            [],
-            LineInstruction::SetPrologueEnd,
-        );
-        test(
-            constants::DW_LNS_set_isa,
-            [57 + 0x80, 100],
-            LineInstruction::SetIsa(12857),
-        );
-    }
-
-    #[test]
-    fn test_parse_unknown_standard_opcode_no_args() {
-        let input = [OPCODE_BASE, 1, 2, 3];
-        let input = EndianSlice::new(&input, LittleEndian);
-        let mut standard_opcode_lengths = Vec::new();
-        let mut header = make_test_header(input);
-        standard_opcode_lengths.extend(header.standard_opcode_lengths.slice());
-        standard_opcode_lengths.push(0);
-        header.opcode_base += 1;
-        header.standard_opcode_lengths = EndianSlice::new(&standard_opcode_lengths, LittleEndian);
-
-        let mut rest = input;
-        let opcode =
-            LineInstruction::parse(&header, &mut rest).expect("Should parse the opcode OK");
-
-        assert_eq!(
-            opcode,
-            LineInstruction::UnknownStandard0(constants::DwLns(OPCODE_BASE))
-        );
-        assert_eq!(*rest, *input.range_from(1..));
-    }
-
-    #[test]
-    fn test_parse_unknown_standard_opcode_one_arg() {
-        let input = [OPCODE_BASE, 1, 2, 3];
-        let input = EndianSlice::new(&input, LittleEndian);
-        let mut standard_opcode_lengths = Vec::new();
-        let mut header = make_test_header(input);
-        standard_opcode_lengths.extend(header.standard_opcode_lengths.slice());
-        standard_opcode_lengths.push(1);
-        header.opcode_base += 1;
-        header.standard_opcode_lengths = EndianSlice::new(&standard_opcode_lengths, LittleEndian);
-
-        let mut rest = input;
-        let opcode =
-            LineInstruction::parse(&header, &mut rest).expect("Should parse the opcode OK");
-
-        assert_eq!(
-            opcode,
-            LineInstruction::UnknownStandard1(constants::DwLns(OPCODE_BASE), 1)
-        );
-        assert_eq!(*rest, *input.range_from(2..));
-    }
-
-    #[test]
-    fn test_parse_unknown_standard_opcode_many_args() {
-        let input = [OPCODE_BASE, 1, 2, 3];
-        let input = EndianSlice::new(&input, LittleEndian);
-        let args = EndianSlice::new(&input[1..], LittleEndian);
-        let mut standard_opcode_lengths = Vec::new();
-        let mut header = make_test_header(input);
-        standard_opcode_lengths.extend(header.standard_opcode_lengths.slice());
-        standard_opcode_lengths.push(3);
-        header.opcode_base += 1;
-        header.standard_opcode_lengths = EndianSlice::new(&standard_opcode_lengths, LittleEndian);
-
-        let mut rest = input;
-        let opcode =
-            LineInstruction::parse(&header, &mut rest).expect("Should parse the opcode OK");
-
-        assert_eq!(
-            opcode,
-            LineInstruction::UnknownStandardN(constants::DwLns(OPCODE_BASE), args)
-        );
-        assert_eq!(*rest, []);
-    }
-
-    #[test]
-    fn test_parse_extended_opcodes() {
-        fn test<Operands>(
-            raw: constants::DwLne,
-            operands: Operands,
-            expected: LineInstruction<EndianSlice<LittleEndian>>,
-        ) where
-            Operands: AsRef<[u8]>,
-        {
-            let mut input = Vec::new();
-            input.push(0);
-
-            let operands = operands.as_ref();
-            input.push(1 + operands.len() as u8);
-
-            input.push(raw.0);
-            input.extend_from_slice(operands);
-
-            let expected_rest = [0, 1, 2, 3, 4];
-            input.extend_from_slice(&expected_rest);
-
-            let input = EndianSlice::new(&input, LittleEndian);
-            let header = make_test_header(input);
-
-            let mut rest = input;
-            let opcode =
-                LineInstruction::parse(&header, &mut rest).expect("Should parse the opcode OK");
-
-            assert_eq!(opcode, expected);
-            assert_eq!(*rest, expected_rest);
-        }
-
-        test(
-            constants::DW_LNE_end_sequence,
-            [],
-            LineInstruction::EndSequence,
-        );
-        test(
-            constants::DW_LNE_set_address,
-            [1, 2, 3, 4, 5, 6, 7, 8],
-            LineInstruction::SetAddress(578_437_695_752_307_201),
-        );
-        test(
-            constants::DW_LNE_set_discriminator,
-            [42],
-            LineInstruction::SetDiscriminator(42),
-        );
-
-        let mut file = Vec::new();
-        // "foo.c"
-        let path_name = [b'f', b'o', b'o', b'.', b'c', 0];
-        file.extend_from_slice(&path_name);
-        // Directory index.
-        file.push(0);
-        // Last modification of file.
-        file.push(1);
-        // Size of file.
-        file.push(2);
-
-        test(
-            constants::DW_LNE_define_file,
-            file,
-            LineInstruction::DefineFile(FileEntry {
-                path_name: AttributeValue::String(EndianSlice::new(b"foo.c", LittleEndian)),
-                directory_index: 0,
-                timestamp: 1,
-                size: 2,
-                md5: [0; 16],
-            }),
-        );
-
-        // Unknown extended opcode.
-        let operands = [1, 2, 3, 4, 5, 6];
-        let opcode = constants::DwLne(99);
-        test(
-            opcode,
-            operands,
-            LineInstruction::UnknownExtended(opcode, EndianSlice::new(&operands, LittleEndian)),
-        );
-    }
-
-    #[test]
-    fn test_file_entry_directory() {
-        let path_name = [b'f', b'o', b'o', b'.', b'r', b's', 0];
-
-        let mut file = FileEntry {
-            path_name: AttributeValue::String(EndianSlice::new(&path_name, LittleEndian)),
-            directory_index: 1,
-            timestamp: 0,
-            size: 0,
-            md5: [0; 16],
-        };
-
-        let mut header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let dir = AttributeValue::String(EndianSlice::new(b"dir", LittleEndian));
-        header.include_directories.push(dir);
-
-        assert_eq!(file.directory(&header), Some(dir));
-
-        // Now test the compilation's current directory.
-        file.directory_index = 0;
-        assert_eq!(file.directory(&header), None);
-    }
-
-    fn assert_exec_opcode<'input>(
-        header: LineProgramHeader<EndianSlice<'input, LittleEndian>>,
-        mut registers: LineRow,
-        opcode: LineInstruction<EndianSlice<'input, LittleEndian>>,
-        expected_registers: LineRow,
-        expect_new_row: bool,
-    ) {
-        let mut program = IncompleteLineProgram { header };
-        let is_new_row = registers.execute(opcode, &mut program);
-
-        assert_eq!(is_new_row, expect_new_row);
-        assert_eq!(registers, expected_registers);
-    }
-
-    #[test]
-    fn test_exec_special_noop() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::Special(16);
-        let expected_registers = initial_registers;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_special_negative_line_advance() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.line.0 = 10;
-
-        let opcode = LineInstruction::Special(13);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.line.0 -= 3;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_special_positive_line_advance() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let initial_registers = LineRow::new(&header);
-
-        let opcode = LineInstruction::Special(19);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.line.0 += 3;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_special_positive_address_advance() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let initial_registers = LineRow::new(&header);
-
-        let opcode = LineInstruction::Special(52);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 += 3;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_special_positive_address_and_line_advance() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let initial_registers = LineRow::new(&header);
-
-        let opcode = LineInstruction::Special(55);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 += 3;
-        expected_registers.line.0 += 3;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_special_positive_address_and_negative_line_advance() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.line.0 = 10;
-
-        let opcode = LineInstruction::Special(49);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 += 3;
-        expected_registers.line.0 -= 3;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_special_line_underflow() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.line.0 = 2;
-
-        // -3 line advance.
-        let opcode = LineInstruction::Special(13);
-
-        let mut expected_registers = initial_registers;
-        // Clamp at 0. No idea if this is the best way to handle this situation
-        // or not...
-        expected_registers.line.0 = 0;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_copy() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.address.0 = 1337;
-        initial_registers.line.0 = 42;
-
-        let opcode = LineInstruction::Copy;
-
-        let expected_registers = initial_registers;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_advance_pc() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::AdvancePc(42);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 += 42;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_advance_pc_overflow() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let opcode = LineInstruction::AdvancePc(42);
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.address.0 = u64::MAX;
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 = 41;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_advance_line() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::AdvanceLine(42);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.line.0 += 42;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_advance_line_overflow() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let opcode = LineInstruction::AdvanceLine(42);
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.line.0 = u64::MAX;
-
-        let mut expected_registers = initial_registers;
-        expected_registers.line.0 = 41;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_set_file_in_bounds() {
-        for file_idx in 1..3 {
-            let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-            let initial_registers = LineRow::new(&header);
-            let opcode = LineInstruction::SetFile(file_idx);
-
-            let mut expected_registers = initial_registers;
-            expected_registers.file = file_idx;
-
-            assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-        }
-    }
-
-    #[test]
-    fn test_exec_set_file_out_of_bounds() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::SetFile(100);
-
-        // The spec doesn't say anything about rejecting input programs
-        // that set the file register out of bounds of the actual number
-        // of files that have been defined. Instead, we cross our
-        // fingers and hope that one gets defined before
-        // `LineRow::file` gets called and handle the error at
-        // that time if need be.
-        let mut expected_registers = initial_registers;
-        expected_registers.file = 100;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_file_entry_file_index_out_of_bounds() {
-        // These indices are 1-based, so 0 is invalid. 100 is way more than the
-        // number of files defined in the header.
-        let out_of_bounds_indices = [0, 100];
-
-        for file_idx in &out_of_bounds_indices[..] {
-            let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-            let mut row = LineRow::new(&header);
-
-            row.file = *file_idx;
-
-            assert_eq!(row.file(&header), None);
-        }
-    }
-
-    #[test]
-    fn test_file_entry_file_index_in_bounds() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let mut row = LineRow::new(&header);
-
-        row.file = 2;
-
-        assert_eq!(row.file(&header), Some(&header.file_names()[1]));
-    }
-
-    #[test]
-    fn test_exec_set_column() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::SetColumn(42);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.column = 42;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_negate_statement() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::NegateStatement;
-
-        let mut expected_registers = initial_registers;
-        expected_registers.is_stmt = !initial_registers.is_stmt;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_set_basic_block() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.basic_block = false;
-
-        let opcode = LineInstruction::SetBasicBlock;
-
-        let mut expected_registers = initial_registers;
-        expected_registers.basic_block = true;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_const_add_pc() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::ConstAddPc;
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 += 20;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_fixed_add_pc() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.op_index.0 = 1;
-
-        let opcode = LineInstruction::FixedAddPc(10);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 += 10;
-        expected_registers.op_index.0 = 0;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_set_prologue_end() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-
-        let mut initial_registers = LineRow::new(&header);
-        initial_registers.prologue_end = false;
-
-        let opcode = LineInstruction::SetPrologueEnd;
-
-        let mut expected_registers = initial_registers;
-        expected_registers.prologue_end = true;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_set_isa() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::SetIsa(1993);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.isa = 1993;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_unknown_standard_0() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::UnknownStandard0(constants::DwLns(111));
-        let expected_registers = initial_registers;
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_unknown_standard_1() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::UnknownStandard1(constants::DwLns(111), 2);
-        let expected_registers = initial_registers;
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_unknown_standard_n() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::UnknownStandardN(
-            constants::DwLns(111),
-            EndianSlice::new(&[2, 2, 2], LittleEndian),
-        );
-        let expected_registers = initial_registers;
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_end_sequence() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::EndSequence;
-
-        let mut expected_registers = initial_registers;
-        expected_registers.end_sequence = true;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, true);
-    }
-
-    #[test]
-    fn test_exec_set_address() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::SetAddress(3030);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.address.0 = 3030;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_set_address_tombstone() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::SetAddress(!0);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.tombstone = true;
-        expected_registers.address.0 = !0;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_define_file() {
-        let mut program = make_test_program(EndianSlice::new(&[], LittleEndian));
-        let mut row = LineRow::new(program.header());
-
-        let file = FileEntry {
-            path_name: AttributeValue::String(EndianSlice::new(b"test.cpp", LittleEndian)),
-            directory_index: 0,
-            timestamp: 0,
-            size: 0,
-            md5: [0; 16],
-        };
-
-        let opcode = LineInstruction::DefineFile(file);
-        let is_new_row = row.execute(opcode, &mut program);
-
-        assert_eq!(is_new_row, false);
-        assert_eq!(Some(&file), program.header().file_names.last());
-    }
-
-    #[test]
-    fn test_exec_set_discriminator() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::SetDiscriminator(9);
-
-        let mut expected_registers = initial_registers;
-        expected_registers.discriminator = 9;
-
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    #[test]
-    fn test_exec_unknown_extended() {
-        let header = make_test_header(EndianSlice::new(&[], LittleEndian));
-        let initial_registers = LineRow::new(&header);
-        let opcode = LineInstruction::UnknownExtended(
-            constants::DwLne(74),
-            EndianSlice::new(&[], LittleEndian),
-        );
-        let expected_registers = initial_registers;
-        assert_exec_opcode(header, initial_registers, opcode, expected_registers, false);
-    }
-
-    /// Ensure that `LineRows<R,P>` is covariant wrt R.
-    /// This only needs to compile.
-    #[allow(dead_code, unreachable_code, unused_variables)]
-    fn test_line_rows_variance<'a, 'b>(_: &'a [u8], _: &'b [u8])
-    where
-        'a: 'b,
-    {
-        let a: &OneShotLineRows<EndianSlice<'a, LittleEndian>> = unimplemented!();
-        let _: &OneShotLineRows<EndianSlice<'b, LittleEndian>> = a;
-    }
-
-    #[test]
-    fn test_parse_debug_line_v5_ok() {
-        let expected_lengths = &[1, 2];
-        let expected_program = &[0, 1, 2, 3, 4];
-        let expected_rest = &[5, 6, 7, 8, 9];
-        let expected_include_directories = [
-            AttributeValue::String(EndianSlice::new(b"dir1", LittleEndian)),
-            AttributeValue::String(EndianSlice::new(b"dir2", LittleEndian)),
-        ];
-        let expected_file_names = [
-            FileEntry {
-                path_name: AttributeValue::String(EndianSlice::new(b"file1", LittleEndian)),
-                directory_index: 0,
-                timestamp: 0,
-                size: 0,
-                md5: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16],
-            },
-            FileEntry {
-                path_name: AttributeValue::String(EndianSlice::new(b"file2", LittleEndian)),
-                directory_index: 1,
-                timestamp: 0,
-                size: 0,
-                md5: [
-                    11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
-                ],
-            },
-        ];
-
-        for format in vec![Format::Dwarf32, Format::Dwarf64] {
-            let length = Label::new();
-            let header_length = Label::new();
-            let start = Label::new();
-            let header_start = Label::new();
-            let end = Label::new();
-            let header_end = Label::new();
-            let section = Section::with_endian(Endian::Little)
-                .initial_length(format, &length, &start)
-                .D16(5)
-                // Address size.
-                .D8(4)
-                // Segment selector size.
-                .D8(0)
-                .word_label(format.word_size(), &header_length)
-                .mark(&header_start)
-                // Minimum instruction length.
-                .D8(1)
-                // Maximum operations per byte.
-                .D8(1)
-                // Default is_stmt.
-                .D8(1)
-                // Line base.
-                .D8(0)
-                // Line range.
-                .D8(1)
-                // Opcode base.
-                .D8(expected_lengths.len() as u8 + 1)
-                // Standard opcode lengths for opcodes 1 .. opcode base - 1.
-                .append_bytes(expected_lengths)
-                // Directory entry format count.
-                .D8(1)
-                .uleb(constants::DW_LNCT_path.0 as u64)
-                .uleb(constants::DW_FORM_string.0 as u64)
-                // Directory count.
-                .D8(2)
-                .append_bytes(b"dir1\0")
-                .append_bytes(b"dir2\0")
-                // File entry format count.
-                .D8(3)
-                .uleb(constants::DW_LNCT_path.0 as u64)
-                .uleb(constants::DW_FORM_string.0 as u64)
-                .uleb(constants::DW_LNCT_directory_index.0 as u64)
-                .uleb(constants::DW_FORM_data1.0 as u64)
-                .uleb(constants::DW_LNCT_MD5.0 as u64)
-                .uleb(constants::DW_FORM_data16.0 as u64)
-                // File count.
-                .D8(2)
-                .append_bytes(b"file1\0")
-                .D8(0)
-                .append_bytes(&expected_file_names[0].md5)
-                .append_bytes(b"file2\0")
-                .D8(1)
-                .append_bytes(&expected_file_names[1].md5)
-                .mark(&header_end)
-                // Dummy line program data.
-                .append_bytes(expected_program)
-                .mark(&end)
-                // Dummy trailing data.
-                .append_bytes(expected_rest);
-            length.set_const((&end - &start) as u64);
-            header_length.set_const((&header_end - &header_start) as u64);
-            let section = section.get_contents().unwrap();
-
-            let input = &mut EndianSlice::new(&section, LittleEndian);
-
-            let header = LineProgramHeader::parse(input, DebugLineOffset(0), 0, None, None)
-                .expect("should parse header ok");
-
-            assert_eq!(header.raw_program_buf().slice(), expected_program);
-            assert_eq!(input.slice(), expected_rest);
-
-            assert_eq!(header.offset, DebugLineOffset(0));
-            assert_eq!(header.version(), 5);
-            assert_eq!(header.address_size(), 4);
-            assert_eq!(header.minimum_instruction_length(), 1);
-            assert_eq!(header.maximum_operations_per_instruction(), 1);
-            assert_eq!(header.default_is_stmt(), true);
-            assert_eq!(header.line_base(), 0);
-            assert_eq!(header.line_range(), 1);
-            assert_eq!(header.opcode_base(), expected_lengths.len() as u8 + 1);
-            assert_eq!(header.standard_opcode_lengths().slice(), expected_lengths);
-            assert_eq!(
-                header.directory_entry_format(),
-                &[FileEntryFormat {
-                    content_type: constants::DW_LNCT_path,
-                    form: constants::DW_FORM_string,
-                }]
-            );
-            assert_eq!(header.include_directories(), expected_include_directories);
-            assert_eq!(header.directory(0), Some(expected_include_directories[0]));
-            assert_eq!(
-                header.file_name_entry_format(),
-                &[
-                    FileEntryFormat {
-                        content_type: constants::DW_LNCT_path,
-                        form: constants::DW_FORM_string,
-                    },
-                    FileEntryFormat {
-                        content_type: constants::DW_LNCT_directory_index,
-                        form: constants::DW_FORM_data1,
-                    },
-                    FileEntryFormat {
-                        content_type: constants::DW_LNCT_MD5,
-                        form: constants::DW_FORM_data16,
-                    }
-                ]
-            );
-            assert_eq!(header.file_names(), expected_file_names);
-            assert_eq!(header.file(0), Some(&expected_file_names[0]));
-        }
-    }
-
-    #[test]
-    fn test_sequences() {
-        #[rustfmt::skip]
-        let buf = [
-            // 32-bit length
-            94, 0x00, 0x00, 0x00,
-            // Version.
-            0x04, 0x00,
-            // Header length = 40.
-            0x28, 0x00, 0x00, 0x00,
-            // Minimum instruction length.
-            0x01,
-            // Maximum operations per byte.
-            0x01,
-            // Default is_stmt.
-            0x01,
-            // Line base.
-            0x00,
-            // Line range.
-            0x01,
-            // Opcode base.
-            0x03,
-            // Standard opcode lengths for opcodes 1 .. opcode base - 1.
-            0x01, 0x02,
-            // Include directories = '/', 'i', 'n', 'c', '\0', '/', 'i', 'n', 'c', '2', '\0', '\0'
-            0x2f, 0x69, 0x6e, 0x63, 0x00, 0x2f, 0x69, 0x6e, 0x63, 0x32, 0x00, 0x00,
-            // File names
-                // foo.rs
-                0x66, 0x6f, 0x6f, 0x2e, 0x72, 0x73, 0x00,
-                0x00,
-                0x00,
-                0x00,
-                // bar.h
-                0x62, 0x61, 0x72, 0x2e, 0x68, 0x00,
-                0x01,
-                0x00,
-                0x00,
-            // End file names.
-            0x00,
-
-            0, 5, constants::DW_LNE_set_address.0, 1, 0, 0, 0,
-            constants::DW_LNS_copy.0,
-            constants::DW_LNS_advance_pc.0, 1,
-            constants::DW_LNS_copy.0,
-            constants::DW_LNS_advance_pc.0, 2,
-            0, 1, constants::DW_LNE_end_sequence.0,
-
-            // Tombstone
-            0, 5, constants::DW_LNE_set_address.0, 0xff, 0xff, 0xff, 0xff,
-            constants::DW_LNS_copy.0,
-            constants::DW_LNS_advance_pc.0, 1,
-            constants::DW_LNS_copy.0,
-            constants::DW_LNS_advance_pc.0, 2,
-            0, 1, constants::DW_LNE_end_sequence.0,
-
-            0, 5, constants::DW_LNE_set_address.0, 11, 0, 0, 0,
-            constants::DW_LNS_copy.0,
-            constants::DW_LNS_advance_pc.0, 1,
-            constants::DW_LNS_copy.0,
-            constants::DW_LNS_advance_pc.0, 2,
-            0, 1, constants::DW_LNE_end_sequence.0,
-        ];
-        assert_eq!(buf[0] as usize, buf.len() - 4);
-
-        let rest = &mut EndianSlice::new(&buf, LittleEndian);
-
-        let header = LineProgramHeader::parse(rest, DebugLineOffset(0), 4, None, None)
-            .expect("should parse header ok");
-        let program = IncompleteLineProgram { header };
-
-        let sequences = program.sequences().unwrap().1;
-        assert_eq!(sequences.len(), 2);
-        assert_eq!(sequences[0].start, 1);
-        assert_eq!(sequences[0].end, 4);
-        assert_eq!(sequences[1].start, 11);
-        assert_eq!(sequences[1].end, 14);
-    }
-}