washout_builder 0.16.3 → 0.16.4

data/example/test_app/bin/rake

@@ -0,0 +1,8 @@
+#!/usr/bin/env ruby
+begin
+  load File.expand_path("../spring", __FILE__)
+rescue LoadError
+end
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/example/test_app/bin/setup

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+require 'pathname'
+
+# path to your application root.
+APP_ROOT = Pathname.new File.expand_path('../../',  __FILE__)
+
+Dir.chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file:
+
+  puts "== Installing dependencies =="
+  system "gem install bundler --conservative"
+  system "bundle check || bundle install"
+
+  # puts "\n== Copying sample files =="
+  # unless File.exist?("config/database.yml")
+  #   system "cp config/database.yml.sample config/database.yml"
+  # end
+
+  puts "\n== Preparing database =="
+  system "bin/rake db:setup"
+
+  puts "\n== Removing old logs and tempfiles =="
+  system "rm -f log/*"
+  system "rm -rf tmp/cache"
+
+  puts "\n== Restarting application server =="
+  system "touch tmp/restart.txt"
+end

data/example/test_app/bin/spring

@@ -0,0 +1,15 @@
+#!/usr/bin/env ruby
+
+# This file loads spring without using Bundler, in order to be fast.
+# It gets overwritten when you run the `spring binstub` command.
+
+unless defined?(Spring)
+  require "rubygems"
+  require "bundler"
+
+  if match = Bundler.default_lockfile.read.match(/^GEM$.*?^    (?:  )*spring \((.*?)\)$.*?^$/m)
+    Gem.paths = { "GEM_PATH" => [Bundler.bundle_path.to_s, *Gem.path].uniq }
+    gem "spring", match[1]
+    require "spring/binstub"
+  end
+end

data/example/test_app/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment', __FILE__)
+run Rails.application

data/example/test_app/config/application.rb

@@ -0,0 +1,39 @@
+require File.expand_path('../boot', __FILE__)
+
+require "rails"
+# Pick the frameworks you want:
+require "active_model/railtie"
+require "active_job/railtie"
+require "active_record/railtie"
+require "action_controller/railtie"
+require "action_mailer/railtie"
+require "action_view/railtie"
+require "sprockets/railtie"
+# require "rails/test_unit/railtie"
+
+# Require the gems listed in Gemfile, including any gems
+# you've limited to :test, :development, or :production.
+Bundler.require(*Rails.groups)
+
+module TestApp
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+    config.wash_out.parser = :nokogiri
+     config.wash_out.wsdl_style = 'document'
+     config.wash_out.snakecase_input = true
+     config.wash_out.camelize_wsdl = false
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+    config.encoding = "utf-8"
+    # Do not swallow errors in after_commit/after_rollback callbacks.
+    config.active_record.raise_in_transactional_callbacks = true
+  end
+end

data/example/test_app/config/boot.rb

@@ -0,0 +1,3 @@
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+
+require 'bundler/setup' # Set up gems listed in the Gemfile.

data/example/test_app/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: 5
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

data/example/test_app/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/example/test_app/config/environments/development.rb

@@ -0,0 +1,43 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  config.wash_out.catch_xml_errors = true
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Do not compress assets
+  config.assets.compress = false
+
+  # Expands the lines which load the assets
+  config.assets.debug = true
+
+  # Generate digests for assets URLs
+  config.assets.digest = false
+
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/example/test_app/config/environments/production.rb

@@ -0,0 +1,79 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/example/test_app/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static file server for tests with Cache-Control for performance.
+  config.serve_static_files   = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Randomize the order test cases are executed.
+  config.active_support.test_order = :random
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/example/test_app/config/initializers/api_token.rb

@@ -0,0 +1,2 @@
+  TestApp::Application.config.api_auth_token  = 'iyFGGfLz1mIjegs6PZ5YkbIYXgNfkeWAR1xqoeZUNKNgFsWxBsoAfLTSXcy42iS3spE6fvvveafR98Iza3bKttK8L8zMvbkylemO'
+  TestApp::Application.config.api_namespace = "http://localhost:3000/api/"

data/example/test_app/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/example/test_app/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/example/test_app/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/example/test_app/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/example/test_app/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/example/test_app/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/example/test_app/config/initializers/session_store.rb

@@ -0,0 +1,6 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store,
+                                              :key => '_app_tracker_session',
+                                              :secure => Rails.env.production?,
+                                              :httponly => true

data/example/test_app/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/example/test_app/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/example/test_app/config/routes.rb

@@ -0,0 +1,62 @@
+Rails.application.routes.draw do
+  # The priority is based upon order of creation: first created -> highest priority.
+  # See how all your routes lay out with "rake routes".
+   namespace :api do
+   wash_out :rumbas
+   wash_out :project_service
+  end
+
+  mount WashoutBuilder::Engine => '/washout'
+
+  # You can have the root of your site routed with "root"
+  # root 'welcome#index'
+
+  # Example of regular route:
+  #   get 'products/:id' => 'catalog#view'
+
+  # Example of named route that can be invoked with purchase_url(id: product.id)
+  #   get 'products/:id/purchase' => 'catalog#purchase', as: :purchase
+
+  # Example resource route (maps HTTP verbs to controller actions automatically):
+  #   resources :products
+
+  # Example resource route with options:
+  #   resources :products do
+  #     member do
+  #       get 'short'
+  #       post 'toggle'
+  #     end
+  #
+  #     collection do
+  #       get 'sold'
+  #     end
+  #   end
+
+  # Example resource route with sub-resources:
+  #   resources :products do
+  #     resources :comments, :sales
+  #     resource :seller
+  #   end
+
+  # Example resource route with more complex sub-resources:
+  #   resources :products do
+  #     resources :comments
+  #     resources :sales do
+  #       get 'recent', on: :collection
+  #     end
+  #   end
+
+  # Example resource route with concerns:
+  #   concern :toggleable do
+  #     post 'toggle'
+  #   end
+  #   resources :posts, concerns: :toggleable
+  #   resources :photos, concerns: :toggleable
+
+  # Example resource route within a namespace:
+  #   namespace :admin do
+  #     # Directs /admin/products/* to Admin::ProductsController
+  #     # (app/controllers/admin/products_controller.rb)
+  #     resources :products
+  #   end
+end