wallee-ruby-sdk 4.5.0 → 6.0.0

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/lib/test/unit/util/procwrapper.rb

@@ -1,48 +0,0 @@
-#--
-#
-# Author:: Nathaniel Talbott.
-# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
-# License:: Ruby license.
-
-module Test
-  module Unit
-    module Util
-
-      # Allows the storage of a Proc passed through '&' in a
-      # hash.
-      #
-      # Note: this may be inefficient, since the hash being
-      # used is not necessarily very good. In Observable,
-      # efficiency is not too important, since the hash is
-      # only accessed when adding and removing listeners,
-      # not when notifying.
-
-      class ProcWrapper
-
-        # Creates a new wrapper for a_proc.
-        def initialize(a_proc)
-          @a_proc = a_proc
-          @hash = a_proc.inspect.sub(/^(#<#{a_proc.class}:)/){''}.sub(/(>)$/){''}.hex
-        end
-
-        def hash
-          return @hash
-        end
-
-        def ==(other)
-          case(other)
-          when ProcWrapper
-            return @a_proc == other.to_proc
-          else
-            return super
-          end
-        end
-        alias :eql? :==
-
-        def to_proc
-          return @a_proc
-        end
-      end
-    end
-  end
-end

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/lib/test/unit/version.rb

@@ -1,5 +0,0 @@
-module Test
-  module Unit
-    VERSION = "3.3.9"
-  end
-end

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/lib/test/unit.rb

@@ -1,519 +0,0 @@
-require 'test/unit/testcase'
-require 'test/unit/autorunner'
-
-module Test # :nodoc:
-  #
-  # # Test::Unit - Ruby Unit Testing Framework
-  #
-  # ## Introduction
-  #
-  # Unit testing is making waves all over the place, largely due to the
-  # fact that it is a core practice of XP. While XP is great, unit testing
-  # has been around for a long time and has always been a good idea. One
-  # of the keys to good unit testing, though, is not just writing tests,
-  # but having tests. What's the difference? Well, if you just _write_ a
-  # test and throw it away, you have no guarantee that something won't
-  # change later which breaks your code. If, on the other hand, you _have_
-  # tests (obviously you have to write them first), and run them as often
-  # as possible, you slowly build up a wall of things that cannot break
-  # without you immediately knowing about it. This is when unit testing
-  # hits its peak usefulness.
-  #
-  # Enter Test::Unit, a framework for unit testing in Ruby, helping you to
-  # design, debug and evaluate your code by making it easy to write and
-  # have tests for it.
-  #
-  #
-  # ## Notes
-  #
-  # Test::Unit has grown out of and superceded Lapidary.
-  #
-  #
-  # ## Feedback
-  #
-  # I like (and do my best to practice) XP, so I value early releases,
-  # user feedback, and clean, simple, expressive code. There is always
-  # room for improvement in everything I do, and Test::Unit is no
-  # exception. Please, let me know what you think of Test::Unit as it
-  # stands, and what you'd like to see expanded/changed/improved/etc. If
-  # you find a bug, let me know ASAP; one good way to let me know what the
-  # bug is is to submit a new test that catches it :-) Also, I'd love to
-  # hear about any successes you have with Test::Unit, and any
-  # documentation you might add will be greatly appreciated. My contact
-  # info is below.
-  #
-  #
-  # ## Contact Information
-  #
-  #   * [GitHub issues on
-  #     test-unit/test-unit](https://github.com/test-unit/test-unit/issues):
-  #     If you have any issues, please report them to here.
-  #
-  #   * [GitHub pull requests on
-  #     test-unit/test-unit](https://github.com/test-unit/test-unit/pulls):
-  #     If you have any patches, please report them to here.
-  #
-  #   * [ruby-talk mailing
-  #     list](https://www.ruby-lang.org/en/community/mailing-lists/):
-  #     If you have any questions, you can ask them here.
-  #
-  #
-  # ## Credits
-  #
-  # I'd like to thank...
-  #
-  # Matz, for a great language!
-  #
-  # Masaki Suketa, for his work on RubyUnit, which filled a vital need in
-  # the Ruby world for a very long time. I'm also grateful for his help in
-  # polishing Test::Unit and getting the RubyUnit compatibility layer
-  # right. His graciousness in allowing Test::Unit to supercede RubyUnit
-  # continues to be a challenge to me to be more willing to defer my own
-  # rights.
-  #
-  # Ken McKinlay, for his interest and work on unit testing, and for his
-  # willingness to dialog about it. He was also a great help in pointing
-  # out some of the holes in the RubyUnit compatibility layer.
-  #
-  # Dave Thomas, for the original idea that led to the extremely simple
-  # "require 'test/unit'", plus his code to improve it even more by
-  # allowing the selection of tests from the command-line. Also, without
-  # RDoc, the documentation for Test::Unit would stink a lot more than it
-  # does now.
-  #
-  # Everyone who's helped out with bug reports, feature ideas,
-  # encouragement to continue, etc. It's a real privilege to be a part of
-  # the Ruby community.
-  #
-  # The guys at RoleModel Software, for putting up with me repeating, "But
-  # this would be so much easier in Ruby!" whenever we're coding in Java.
-  #
-  # My Creator, for giving me life, and giving it more abundantly.
-  #
-  #
-  # ## License
-  #
-  # Test::Unit is copyright (c) 2000-2003 Nathaniel Talbott. It is free
-  # software, and is distributed under the Ruby license. See the COPYING
-  # file.
-  #
-  # Exception: lib/test/unit/diff.rb is copyright (c)
-  # 2008-2010 Kouhei Sutou and 2001-2008 Python Software
-  # Foundation. It is free software, and is distributed
-  # under the Ruby license and/or the PSF license. See the
-  # COPYING file and PSFL file.
-  #
-  # ## Warranty
-  #
-  # This software is provided "as is" and without any express or
-  # implied warranties, including, without limitation, the implied
-  # warranties of merchantibility and fitness for a particular
-  # purpose.
-  #
-  #
-  # ## Author
-  #
-  # Nathaniel Talbott.
-  # Copyright (c) 2000-2003, Nathaniel Talbott
-  #
-  # ----
-  #
-  # # Usage
-  #
-  # The general idea behind unit testing is that you write a _test_
-  # _method_ that makes certain _assertions_ about your code, working
-  # against a _test_ _fixture_. A bunch of these _test_ _methods_ are
-  # bundled up into a _test_ _suite_ and can be run any time the
-  # developer wants. The results of a run are gathered in a _test_
-  # _result_ and displayed to the user through some UI. So, lets break
-  # this down and see how Test::Unit provides each of these necessary
-  # pieces.
-  #
-  #
-  # ## Assertions
-  #
-  # These are the heart of the framework. Think of an assertion as a
-  # statement of expected outcome, i.e. "I assert that x should be equal
-  # to y". If, when the assertion is executed, it turns out to be
-  # correct, nothing happens, and life is good. If, on the other hand,
-  # your assertion turns out to be false, an error is propagated with
-  # pertinent information so that you can go back and make your
-  # assertion succeed, and, once again, life is good. For an explanation
-  # of the current assertions, see Test::Unit::Assertions.
-  #
-  #
-  # ## Test Method & Test Fixture
-  #
-  # Obviously, these assertions have to be called within a context that
-  # knows about them and can do something meaningful with their
-  # pass/fail value. Also, it's handy to collect a bunch of related
-  # tests, each test represented by a method, into a common test class
-  # that knows how to run them. The tests will be in a separate class
-  # from the code they're testing for a couple of reasons. First of all,
-  # it allows your code to stay uncluttered with test code, making it
-  # easier to maintain. Second, it allows the tests to be stripped out
-  # for deployment, since they're really there for you, the developer,
-  # and your users don't need them. Third, and most importantly, it
-  # allows you to set up a common test fixture for your tests to run
-  # against.
-  #
-  # What's a test fixture? Well, tests do not live in a vacuum; rather,
-  # they're run against the code they are testing. Often, a collection
-  # of tests will run against a common set of data, also called a
-  # fixture. If they're all bundled into the same test class, they can
-  # all share the setting up and tearing down of that data, eliminating
-  # unnecessary duplication and making it much easier to add related
-  # tests.
-  #
-  # Test::Unit::TestCase wraps up a collection of test methods together
-  # and allows you to easily set up and tear down the same test fixture
-  # for each test. This is done by overriding #setup and/or #teardown,
-  # which will be called before and after each test method that is
-  # run. The TestCase also knows how to collect the results of your
-  # assertions into a Test::Unit::TestResult, which can then be reported
-  # back to you... but I'm getting ahead of myself. To write a test,
-  # follow these steps:
-  #
-  # * Make sure Test::Unit is in your library path.
-  # * require 'test/unit' in your test script.
-  # * Create a class that subclasses Test::Unit::TestCase.
-  # * Add a method that begins with "test" to your class.
-  # * Make assertions in your test method.
-  # * Optionally define #setup and/or #teardown to set up and/or tear
-  #   down your common test fixture.
-  # * You can now run your test as you would any other Ruby
-  #   script... try it and see!
-  #
-  # A really simple test might look like this (#setup and #teardown are
-  # commented out to indicate that they are completely optional):
-  #
-  #     require 'test/unit'
-  #     
-  #     class MyTest < Test::Unit::TestCase
-  #       # def setup
-  #       # end
-  #     
-  #       # def teardown
-  #       # end
-  #     
-  #       def test_fail
-  #         assert(false, 'Assertion was false.')
-  #       end
-  #     end
-  #
-  #
-  # ## Test Runners
-  #
-  # So, now you have this great test class, but you still
-  # need a way to run it and view any failures that occur
-  # during the run. There are some test runner; console test
-  # runner, GTK+ test runner and so on. The console test
-  # runner is automatically invoked for you if you require
-  # 'test/unit' and simply run the file. To use another
-  # runner simply set default test runner ID to
-  # Test::Unit::AutoRunner:
-  #
-  #     require 'test/unit'
-  #     Test::Unit::AutoRunner.default_runner = "gtk2"
-  #
-  # ## Test Suite
-  #
-  # As more and more unit tests accumulate for a given project, it
-  # becomes a real drag running them one at a time, and it also
-  # introduces the potential to overlook a failing test because you
-  # forget to run it. Suddenly it becomes very handy that the
-  # TestRunners can take any object that returns a Test::Unit::TestSuite
-  # in response to a suite method. The TestSuite can, in turn, contain
-  # other TestSuites or individual tests (typically created by a
-  # TestCase). In other words, you can easily wrap up a group of
-  # TestCases and TestSuites.
-  #
-  # Test::Unit does a little bit more for you, by wrapping
-  # these up automatically when you require
-  # 'test/unit'. What does this mean? It means you could
-  # write the above test case like this instead:
-  #
-  #     require 'test/unit'
-  #     require 'test_myfirsttests'
-  #     require 'test_moretestsbyme'
-  #     require 'test_anothersetoftests'
-  #
-  # Test::Unit is smart enough to find all the test cases existing in
-  # the ObjectSpace and wrap them up into a suite for you. It then runs
-  # the dynamic suite using the console TestRunner.
-  #
-  #
-  # ## Configuration file
-  #
-  # Test::Unit reads 'test-unit.yml' in the current working
-  # directory as Test::Unit's configuration file. It can
-  # contain the following configurations:
-  #
-  # * color scheme definitions
-  # * test runner to be used
-  # * test runner options
-  # * test collector to be used
-  #
-  # Except color scheme definitions, all of them are
-  # specified by command line option.
-  #
-  # Here are sample color scheme definitions:
-  #
-  #     color_schemes:
-  #       inverted:
-  #         success:
-  #           name: red
-  #           bold: true
-  #         failure:
-  #           name: green
-  #           bold: true
-  #       other_scheme:
-  #         ...
-  #
-  # Here are the syntax of color scheme definitions:
-  #
-  #     color_schemes:
-  #       SCHEME_NAME:
-  #         EVENT_NAME:
-  #           name: COLOR_NAME
-  #           intensity: BOOLEAN
-  #           bold: BOOLEAN
-  #           italic: BOOLEAN
-  #           underline: BOOLEAN
-  #         ...
-  #       ...
-  #
-  # SCHEME_NAME
-  # : the name of the color scheme
-  #
-  # EVENT_NAME
-  # : one of [success, failure, pending, omission, notification, error]
-  #
-  # COLOR_NAME
-  # : one of [black, red, green, yellow, blue, magenta, cyan, white]
-  #
-  # BOOLEAN
-  # : true or false
-  #
-  # You can use the above 'inverted' color scheme with the
-  # following configuration:
-  #
-  #     runner: console
-  #     console_options:
-  #       color_scheme: inverted
-  #     color_schemes:
-  #       inverted:
-  #         success:
-  #           name: red
-  #           bold: true
-  #         failure:
-  #           name: green
-  #           bold: true
-  #
-  # ## Questions?
-  #
-  # I'd really like to get feedback from all levels of Ruby
-  # practitioners about typos, grammatical errors, unclear statements,
-  # missing points, etc., in this document (or any other).
-  #
-
-  module Unit
-    class << self
-      # Set true when Test::Unit has run.  If set to true Test::Unit
-      # will not automatically run at exit.
-      #
-      # @deprecated Use Test::Unit::AutoRunner.need_auto_run= instead.
-      def run=(have_run)
-        AutoRunner.need_auto_run = (not have_run)
-      end
-
-      # Already tests have run?
-      #
-      # @deprecated Use Test::Unit::AutoRunner.need_auto_run? instead.
-      def run?
-        not AutoRunner.need_auto_run?
-      end
-
-      # @api private
-      @@at_start_hooks = []
-
-      # Regsiter a hook that is run before running tests.
-      # To register multiple hooks, call this method multiple times.
-      #
-      # Here is an example test case:
-      #
-      #     Test::Unit.at_start do
-      #       # ...
-      #     end
-      #
-      #     class TestMyClass1 < Test::Unit::TestCase
-      #       class << self
-      #         def startup
-      #           # ...
-      #         end
-      #       end
-      #
-      #       def setup
-      #         # ...
-      #       end
-      #
-      #       def test_my_class1
-      #         # ...
-      #       end
-      #
-      #       def test_my_class2
-      #         # ...
-      #       end
-      #     end
-      #
-      #     class TestMyClass2 < Test::Unit::TestCase
-      #       class << self
-      #         def startup
-      #           # ...
-      #         end
-      #       end
-      #
-      #       def setup
-      #         # ...
-      #       end
-      #
-      #       def test_my_class1
-      #         # ...
-      #       end
-      #
-      #       def test_my_class2
-      #         # ...
-      #       end
-      #     end
-      #
-      # Here is a call order:
-      #
-      # * at_start
-      # * TestMyClass1.startup
-      # * TestMyClass1#setup
-      # * TestMyClass1#test_my_class1
-      # * TestMyClass1#setup
-      # * TestMyClass1#test_my_class2
-      # * TestMyClass2#setup
-      # * TestMyClass2#test_my_class1
-      # * TestMyClass2#setup
-      # * TestMyClass2#test_my_class2
-      #
-      # @example
-      #   Test::Unit.at_start do
-      #     puts "Start!"
-      #   end
-      #
-      # @yield A block that is run before running tests.
-      # @yieldreturn [void]
-      # @return [void]
-      #
-      # @since 2.5.2
-      def at_start(&hook)
-        @@at_start_hooks << hook
-      end
-
-      # @api private
-      def run_at_start_hooks
-        @@at_start_hooks.each do |hook|
-          hook.call
-        end
-      end
-
-      # @api private
-      @@at_exit_hooks = []
-
-      # Regsiter a hook that is run after running tests.
-      # To register multiple hooks, call this method multiple times.
-      #
-      # Here is an example test case:
-      #
-      #     Test::Unit.at_exit do
-      #       # ...
-      #     end
-      #
-      #     class TestMyClass1 < Test::Unit::TestCase
-      #       class << self
-      #         def shutdown
-      #           # ...
-      #         end
-      #       end
-      #
-      #       def teardown
-      #         # ...
-      #       end
-      #
-      #       def test_my_class1
-      #         # ...
-      #       end
-      #
-      #       def test_my_class2
-      #         # ...
-      #       end
-      #     end
-      #
-      #     class TestMyClass2 < Test::Unit::TestCase
-      #       class << self
-      #         def shutdown
-      #           # ...
-      #         end
-      #       end
-      #
-      #       def teardown
-      #         # ...
-      #       end
-      #
-      #       def test_my_class1
-      #         # ...
-      #       end
-      #
-      #       def test_my_class2
-      #         # ...
-      #       end
-      #     end
-      #
-      # Here is a call order:
-      #
-      # * TestMyClass1#test_my_class1
-      # * TestMyClass1#teardown
-      # * TestMyClass1#test_my_class2
-      # * TestMyClass1#teardown
-      # * TestMyClass1.shutdown
-      # * TestMyClass2#test_my_class1
-      # * TestMyClass2#teardown
-      # * TestMyClass2#test_my_class2
-      # * TestMyClass2#teardown
-      # * TestMyClass2.shutdown
-      # * at_exit
-      #
-      # @example
-      #   Test::Unit.at_exit do
-      #     puts "Exit!"
-      #   end
-      #
-      # @yield A block that is run after running tests.
-      # @yieldreturn [void]
-      # @return [void]
-      #
-      # @since 2.5.2
-      def at_exit(&hook)
-        @@at_exit_hooks << hook
-      end
-
-      # @api private
-      def run_at_exit_hooks
-        @@at_exit_hooks.each do |hook|
-          hook.call
-        end
-      end
-    end
-  end
-end
-
-Module.new do
-  at_exit do
-    if $!.nil? and Test::Unit::AutoRunner.need_auto_run?
-      exit Test::Unit::AutoRunner.run
-    end
-  end
-end

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/lib/test-unit.rb

@@ -1,17 +0,0 @@
-# Copyright (C) 2012-2015  Kouhei Sutou <kou@clear-code.com>
-
-module Test
-  module Unit
-    autoload :TestCase, "test/unit/testcase"
-    autoload :AutoRunner, "test/unit/autorunner"
-  end
-end
-
-unless respond_to?(:run_test, true)
-  # experimental. It is for "ruby -rtest-unit -e run_test test/test_*.rb".
-  # Is this API OK or dirty?
-  def run_test
-    self.class.send(:undef_method, :run_test)
-    require "test/unit"
-  end
-end

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/sample/adder.rb

@@ -1,13 +0,0 @@
-# Author:: Nathaniel Talbott.
-# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
-# License:: Ruby license.
-
-class Adder
-  def initialize(number)
-    @number = number
-  end
-  def add(number)
-    @number + number
-  end
-end
-

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/sample/subtracter.rb

@@ -1,12 +0,0 @@
-# Author:: Nathaniel Talbott.
-# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
-# License:: Ruby license.
-
-class Subtracter
-  def initialize(number)
-    @number = number
-  end
-  def subtract(number)
-    @number - number
-  end
-end

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/sample/test_adder.rb

@@ -1,20 +0,0 @@
-# Author:: Nathaniel Talbott.
-# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
-# License:: Ruby license.
-
-require 'test/unit'
-require_relative 'adder'
-
-class TestAdder < Test::Unit::TestCase
-  def setup
-    @adder = Adder.new(5)
-  end
-
-  def test_add
-    assert_equal(7, @adder.add(2), "Should have added correctly")
-  end
-
-  def teardown
-    @adder = nil
-  end
-end

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/sample/test_subtracter.rb

@@ -1,20 +0,0 @@
-# Author:: Nathaniel Talbott.
-# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
-# License:: Ruby license.
-
-require 'test/unit'
-require_relative 'subtracter'
-
-class TestSubtracter < Test::Unit::TestCase
-  def setup
-    @subtracter = Subtracter.new(5)
-  end
-
-  def test_subtract
-    assert_equal(3, @subtracter.subtract(2), "Should have subtracted correctly")
-  end
-
-  def teardown
-    @subtracter = nil
-  end
-end

data/vendor/bundle/ruby/3.3.0/gems/test-unit-3.3.9/sample/test_user.rb

@@ -1,23 +0,0 @@
-# nested test case example.
-require 'test/unit'
-
-class UserTest < Test::Unit::TestCase
-  def setup
-    @user = "me"
-  end
-
-  def test_full_name
-    assert_equal("me", @user)
-  end
-
-  class ProfileTest < UserTest
-    setup
-    def setup_profile
-      @user += ": profile"
-    end
-
-    def test_has_profile
-      assert_match(/: profile/, @user)
-    end
-  end
-end