wallee-ruby-sdk 4.4.0 → 5.2.0

data/vendor/bundle/ruby/3.1.0/gems/ffi-1.16.3/ext/ffi_c/libffi/.ci/bfin-sim.exp

@@ -1,58 +0,0 @@
-# Copyright (C) 2010, 2019  Free Software Foundation, Inc.
-#
-# This file is part of DejaGnu.
-#
-# DejaGnu is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# DejaGnu is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with DejaGnu; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, MA 02110, USA.
-
-# This is a list of toolchains that are supported on this board.
-set_board_info target_install {bfin-elf}
-
-# Load the generic configuration for this board. This will define a basic set
-# of routines needed by the tool to communicate with the board.
-load_generic_config "sim"
-
-# basic-sim.exp is a basic description for the standard Cygnus simulator.
-load_base_board_description "basic-sim"
-
-# "bfin" is the name of the sim subdir in devo/sim.
-setup_sim bfin
-
-# No multilib options needed by default.
-process_multilib_options ""
-
-# We only support newlib on this target. We assume that all multilib
-# options have been specified before we get here.
-
-set_board_info compiler  "[find_gcc]"
-set_board_info cflags    "[libgloss_include_flags] [newlib_include_flags]"
-set_board_info ldflags   "[libgloss_link_flags] [newlib_link_flags]"
-
-# Configuration settings for testsuites
-set_board_info noargs 1
-set_board_info gdb,nosignals 1
-set_board_info gdb,noresults 1
-set_board_info gdb,cannot_call_functions 1
-set_board_info gdb,skip_float_tests 1
-set_board_info gdb,can_reverse 1
-set_board_info gdb,use_precord 1
-
-# More time is needed
-set_board_info gcc,timeout 800
-set_board_info gdb,timeout 60
-
-# Used by a few gcc.c-torture testcases to delimit how large the stack can
-# be.
-set_board_info gcc,stack_size  5000
-

data/vendor/bundle/ruby/3.1.0/gems/ffi-1.16.3/ext/ffi_c/libffi/.ci/build-cross-in-container.sh

@@ -1,18 +0,0 @@
-#!/bin/bash
-set -x
-
-cd /opt
-
-echo $PATH
-export PATH=/usr/local/bin:$PATH
-echo $PATH
-
-export DEJAGNU=$(pwd)/.ci/site.exp
-echo $DEJAGNU
-ls -l $DEJAGNU
-pwd
-find .
-./configure --host=${HOST} || cat */config.log
-make
-make dist
-BOARDSDIR=$(pwd)/.ci make check RUNTESTFLAGS="-a $RUNTESTFLAGS" || true

data/vendor/bundle/ruby/3.1.0/gems/ffi-1.16.3/ext/ffi_c/libffi/.ci/build-in-container.sh

@@ -1,10 +0,0 @@
-#!/bin/bash
-set -x
-
-export QEMU_LD_PREFIX=/usr/${HOST}
-export DEJAGNU=/opt/.ci/site.exp
-cd /opt
-./configure ${HOST+--host=$HOST --disable-shared}
-make
-make dist
-BOARDSDIR=/opt/.ci make check RUNTESTFLAGS="-a $RUNTESTFLAGS" || true

data/vendor/bundle/ruby/3.1.0/gems/ffi-1.16.3/ext/ffi_c/libffi/.ci/build.sh

@@ -1,124 +0,0 @@
-#!/bin/bash
-
-set -x
-
-# Special build tools are here...
-export PATH=$HOME/i/bin:$PATH
-
-# This is a policy bound API key.  It can only be used with
-# https://github.com/libffi/rlgl-policy.git.
-RLGL_KEY=0LIBFFI-0LIBFFI-0LIBFFI-0LIBFFI
-
-if [ -z ${QEMU_CPU+x} ]; then
-    export SET_QEMU_CPU=
-else
-    export SET_QEMU_CPU="-e QEMU_CPU=${QEMU_CPU}"
-fi
-
-export DOCKER=docker
-
-function build_linux()
-{
-    ./autogen.sh
-    ./configure ${HOST+--host=$HOST} ${CONFIGURE_OPTIONS} || cat */config.log
-    make
-    make dist
-    DEJAGNU=$(pwd)/.ci/site.exp BOARDSDIR=$(pwd)/.ci runtest --version
-    DEJAGNU=$(pwd)/.ci/site.exp BOARDSDIR=$(pwd)/.ci make check RUNTESTFLAGS="-a $RUNTESTFLAGS"
-
-    ./rlgl l --key=${RLGL_KEY} https://rl.gl
-    ./rlgl e -l project=libffi -l sha=${GITHUB_SHA:0:7} -l CC='$CC' ${HOST+-l host=$HOST} --policy=https://github.com/libffi/rlgl-policy.git */testsuite/libffi.log
-    exit $?
-}
-
-function build_foreign_linux()
-{
-    ${DOCKER} run --rm -t -v $(pwd):/opt ${SET_QEMU_CPU} -e LIBFFI_TEST_OPTIMIZATION="${LIBFFI_TEST_OPTIMIZATION}" $2 bash -c /opt/.ci/build-in-container.sh
-
-    ./rlgl l --key=${RLGL_KEY} https://rl.gl
-    ./rlgl e -l project=libffi -l sha=${GITHUB_SHA:0:7} -l CC="$CC" ${HOST+-l host=$HOST} --policy=https://github.com/libffi/rlgl-policy.git */testsuite/libffi.log
-    exit $?
-}
-
-function build_cross_linux()
-{
-    ${DOCKER} run --rm -t -v $(pwd):/opt ${SET_QEMU_CPU} -e HOST="${HOST}" -e CC="${HOST}-gcc-8 ${GCC_OPTIONS}" -e CXX="${HOST}-g++-8 ${GCC_OPTIONS}" -e LIBFFI_TEST_OPTIMIZATION="${LIBFFI_TEST_OPTIMIZATION}" quay.io/moxielogic/cross-ci-build-container:latest bash -c /opt/.ci/build-in-container.sh
-
-    ./rlgl l --key=${RLGL_KEY} https://rl.gl
-    ./rlgl e -l project=libffi -l sha=${GITHUB_SHA:0:7} -l CC="${HOST}-gcc-8 ${GCC_OPTIONS}" -l host=${HOST} --policy=https://github.com/libffi/rlgl-policy.git */testsuite/libffi.log
-    exit $?
-}
-
-function build_cross()
-{
-    ${DOCKER} pull quay.io/moxielogic/libffi-ci-${HOST}
-    ${DOCKER} run --rm -t -v $(pwd):/opt -e HOST="${HOST}" -e CC="${HOST}-gcc ${GCC_OPTIONS}" -e CXX="${HOST}-g++ ${GCC_OPTIONS}" -e RUNNER_WORKSPACE=/opt -e RUNTESTFLAGS="-vv ${RUNTESTFLAGS}" -e LIBFFI_TEST_OPTIMIZATION="${LIBFFI_TEST_OPTIMIZATION}" quay.io/moxielogic/libffi-ci-${HOST} bash -c /opt/.ci/build-cross-in-container.sh
-
-    ./rlgl l --key=${RLGL_KEY} https://rl.gl
-    ./rlgl e -l project=libffi -l sha=${GITHUB_SHA:0:7} -l CC="${HOST}-gcc" -l host=$HOST --policy=https://github.com/libffi/rlgl-policy.git */testsuite/libffi.log
-    exit $?
-}
-
-function build_ios()
-{
-    which python
-# export PYTHON_BIN=/usr/local/bin/python
-    ./generate-darwin-source-and-headers.py --only-ios
-    xcodebuild -showsdks
-    xcodebuild -project libffi.xcodeproj -target "libffi-iOS" -configuration Release -sdk iphoneos11.4
-    exit $?
-}
-
-function build_macosx()
-{
-    which python
-# export PYTHON_BIN=/usr/local/bin/python
-    ./generate-darwin-source-and-headers.py --only-osx
-    xcodebuild -showsdks
-    xcodebuild -project libffi.xcodeproj -target "libffi-Mac" -configuration Release -sdk macosx10.13
-    echo "Finished build"
-    exit $?
-}
-
-case "$HOST" in
-    arm-apple-darwin*)
-	./autogen.sh
-	build_ios
-	;;
-    x86_64-apple-darwin*)
-	./autogen.sh
-	build_macosx
-	;;
-    arm32v7-linux-gnu)
-	./autogen.sh
-        build_foreign_linux arm quay.io/moxielogic/arm32v7-ci-build-container:latest
-	;;
-    bfin-elf )
-	./autogen.sh
-	GCC_OPTIONS=-msim build_cross
-	;;
-    m32r-elf )
-	./autogen.sh
-	build_cross
-	;;
-    or1k-elf )
-	./autogen.sh
-	build_cross
-	;;
-    powerpc-eabisim )
-	./autogen.sh
-	build_cross
-	;;
-    m68k-linux-gnu )
-	./autogen.sh
-	GCC_OPTIONS=-mcpu=547x build_cross_linux
-	;;
-    alpha-linux-gnu | sh4-linux-gnu )
-	./autogen.sh
-	build_cross_linux
-	;;
-    *)
-	./autogen.sh
-	build_linux
-	;;
-esac

data/vendor/bundle/ruby/3.1.0/gems/ffi-1.16.3/ext/ffi_c/libffi/.ci/compile

@@ -1,351 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand '-c -o'.
-
-scriptversion=2018-03-27.18; # UTC
-
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent tools from complaining about whitespace usage.
-IFS=" ""	$nl"
-
-file_conv=
-
-# func_file_conv build_file lazy
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts. If the determined conversion
-# type is listed in (the comma separated) LAZY, no conversion will
-# take place.
-func_file_conv ()
-{
-  file=$1
-  case $file in
-    / | /[!/]*) # absolute file, and not a UNC file
-      if test -z "$file_conv"; then
-	# lazily determine how to convert abs files
-	case `uname -s` in
-	  MINGW*)
-	    file_conv=mingw
-	    ;;
-	  CYGWIN*)
-	    file_conv=cygwin
-	    ;;
-	  *)
-	    file_conv=wine
-	    ;;
-	esac
-      fi
-      case $file_conv/,$2, in
-	*,$file_conv,*)
-	  ;;
-	mingw/*)
-	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
-	  ;;
-	cygwin/*)
-	  file=`cygpath -m "$file" || echo "$file"`
-	  ;;
-	wine/*)
-	  file=`winepath -w "$file" || echo "$file"`
-	  ;;
-      esac
-      ;;
-  esac
-}
-
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
-  func_file_conv "$1"
-  if test -z "$lib_path"; then
-    lib_path=$file
-  else
-    lib_path="$lib_path;$file"
-  fi
-  linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
-  lib=$1
-  found=no
-  save_IFS=$IFS
-  IFS=';'
-  for dir in $lib_path $LIB
-  do
-    IFS=$save_IFS
-    if $shared && test -f "$dir/$lib.dll.lib"; then
-      found=yes
-      lib=$dir/$lib.dll.lib
-      break
-    fi
-    if test -f "$dir/$lib.lib"; then
-      found=yes
-      lib=$dir/$lib.lib
-      break
-    fi
-    if test -f "$dir/lib$lib.a"; then
-      found=yes
-      lib=$dir/lib$lib.a
-      break
-    fi
-  done
-  IFS=$save_IFS
-
-  if test "$found" != yes; then
-    lib=$lib.lib
-  fi
-}
-
-# func_cl_wrapper cl arg...
-# Adjust compile command to suit cl
-func_cl_wrapper ()
-{
-  # Assume a capable shell
-  lib_path=
-  shared=:
-  linker_opts=
-  for arg
-  do
-    if test -n "$eat"; then
-      eat=
-    else
-      case $1 in
-	-o)
-	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
-	  eat=1
-	  case $2 in
-	    *.o | *.[oO][bB][jJ])
-	      func_file_conv "$2"
-	      set x "$@" -Fo"$file"
-	      shift
-	      ;;
-	    *)
-	      func_file_conv "$2"
-	      set x "$@" -Fe"$file"
-	      shift
-	      ;;
-	  esac
-	  ;;
-	-I)
-	  eat=1
-	  func_file_conv "$2" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-I*)
-	  func_file_conv "${1#-I}" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-l)
-	  eat=1
-	  func_cl_dashl "$2"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-l*)
-	  func_cl_dashl "${1#-l}"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-L)
-	  eat=1
-	  func_cl_dashL "$2"
-	  ;;
-	-L*)
-	  func_cl_dashL "${1#-L}"
-	  ;;
-	-static)
-	  shared=false
-	  ;;
-	-warn)
-	  eat=1
-	  ;;
-	-Wl,*)
-	  arg=${1#-Wl,}
-	  save_ifs="$IFS"; IFS=','
-	  for flag in $arg; do
-	    IFS="$save_ifs"
-	    linker_opts="$linker_opts $flag"
-	  done
-	  IFS="$save_ifs"
-	  ;;
-	-Xlinker)
-	  eat=1
-	  linker_opts="$linker_opts $2"
-	  ;;
-	-*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
-	  func_file_conv "$1"
-	  set x "$@" -Tp"$file"
-	  shift
-	  ;;
-	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
-	  func_file_conv "$1" mingw
-	  set x "$@" "$file"
-	  shift
-	  ;;
-	*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-      esac
-    fi
-    shift
-  done
-  if test -n "$linker_opts"; then
-    linker_opts="-link$linker_opts"
-  fi
-  exec "$@" $linker_opts
-  exit 1
-}
-
-eat=
-
-case $1 in
-  '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand '-c -o'.
-Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file 'INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "compile $scriptversion"
-    exit $?
-    ;;
-  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
-  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
-    func_cl_wrapper "$@"      # Doesn't return...
-    ;;
-esac
-
-ofile=
-cfile=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-	# configure might choose to run compile as 'compile cc -o foo foo.c'.
-	# So we strip '-o arg' only if arg is an object.
-	eat=1
-	case $2 in
-	  *.o | *.obj)
-	    ofile=$2
-	    ;;
-	  *)
-	    set x "$@" -o "$2"
-	    shift
-	    ;;
-	esac
-	;;
-      *.c)
-	cfile=$1
-	set x "$@" "$1"
-	shift
-	;;
-      *)
-	set x "$@" "$1"
-	shift
-	;;
-    esac
-  fi
-  shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-  # If no '-o' option was seen then we might have been invoked from a
-  # pattern rule where we don't need one.  That is ok -- this is a
-  # normal compilation that the losing compiler can handle.  If no
-  # '.c' file was seen then we are probably linking.  That is also
-  # ok.
-  exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use '[/\\:.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
-while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
-    break
-  fi
-  sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
-  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
-  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

data/vendor/bundle/ruby/3.1.0/gems/ffi-1.16.3/ext/ffi_c/libffi/.ci/install.sh

@@ -1,78 +0,0 @@
-#!/bin/bash
-set -x
-
-if [[ $RUNNER_OS != 'Linux' ]]; then
-    brew update --verbose
-    # brew update > brew-update.log 2>&1
-    # fix an issue with libtool on travis by reinstalling it
-    brew uninstall libtool;
-    brew install automake libtool dejagnu;
-
-    # Download and extract the rlgl client
-    wget -qO - https://rl.gl/cli/rlgl-darwin-amd64.tgz | \
-	tar --strip-components=2 -xvzf - ./rlgl/rlgl;
-
-else
-    # Download and extract the rlgl client
-    case $HOST in
-	aarch64-linux-gnu)
-	    wget -qO - https://rl.gl/cli/rlgl-linux-arm.tgz | \
-		tar --strip-components=2 -xvzf - ./rlgl/rlgl;
-	    ;;
-	ppc64le-linux-gnu)
-	    wget -qO - https://rl.gl/cli/rlgl-linux-ppc64le.tgz | \
-		tar --strip-components=2 -xvzf - ./rlgl/rlgl;
-	    ;;
-	s390x-linux-gnu)
-	    wget -qO - https://rl.gl/cli/rlgl-linux-s390x.tgz | \
-		tar --strip-components=2 -xvzf - ./rlgl/rlgl;
-	    ;;
-	*)
-	    wget -qO - https://rl.gl/cli/rlgl-linux-amd64.tgz | \
-		tar --strip-components=2 -xvzf - ./rlgl/rlgl;
-	    ;;
-    esac
-
-    sudo apt-get clean # clear the cache
-    sudo apt-get update
-
-    set -x
-    wget --retry-connrefused --waitretry=1 --read-timeout=20 --timeout=15 -t 0 -qO - https://ftpmirror.gnu.org/autoconf/autoconf-2.71.tar.gz | tar -xvzf -
-    mkdir -p ~/i
-    (cd autoconf-2.71; ./configure --prefix=$HOME/i; make; make install)
-
-    case $HOST in
-	mips64el-linux-gnu | sparc64-linux-gnu)
-        ;;
-	alpha-linux-gnu | arm32v7-linux-gnu | m68k-linux-gnu | sh4-linux-gnu)
-	    sudo apt-get install qemu-user-static
-	    ;;
-	hppa-linux-gnu )
-	    sudo apt-get install -y qemu-user-static g++-5-hppa-linux-gnu
-	    ;;
-	i386-pc-linux-gnu)
-	    sudo apt-get install gcc-multilib g++-multilib;
-	    ;;
-	moxie-elf)
-	    echo 'deb [trusted=yes] https://repos.moxielogic.org:7114/MoxieLogic moxiedev main' | sudo tee -a /etc/apt/sources.list
-	    sudo apt-get clean # clear the cache
-	    sudo apt-get update ## -qq
-	    sudo apt-get update
-	    sudo apt-get install -y --allow-unauthenticated moxielogic-moxie-elf-gcc moxielogic-moxie-elf-gcc-c++ moxielogic-moxie-elf-gcc-libstdc++ moxielogic-moxie-elf-gdb-sim texinfo sharutils texlive dejagnu
-	    ;;
-	x86_64-w64-mingw32)
-	    sudo apt-get install gcc-mingw-w64-x86-64 g++-mingw-w64-x86-64 wine;
-	    ;;
-	i686-w32-mingw32)
-	    sudo apt-get install gcc-mingw-w64-i686 g++-mingw-w64-i686 wine;
-	    ;;
-    esac
-    case $HOST in
-	arm32v7-linux-gnu)
-        # don't install host tools
-        ;;
-	*)
-	    sudo apt-get install dejagnu texinfo sharutils
-	    ;;
-    esac
-fi

data/vendor/bundle/ruby/3.1.0/gems/ffi-1.16.3/ext/ffi_c/libffi/.ci/m32r-sim.exp

@@ -1,58 +0,0 @@
-# Copyright (C) 2010, 2019  Free Software Foundation, Inc.
-#
-# This file is part of DejaGnu.
-#
-# DejaGnu is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# DejaGnu is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with DejaGnu; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, MA 02110, USA.
-
-# This is a list of toolchains that are supported on this board.
-set_board_info target_install {m32r-elf}
-
-# Load the generic configuration for this board. This will define a basic set
-# of routines needed by the tool to communicate with the board.
-load_generic_config "sim"
-
-# basic-sim.exp is a basic description for the standard Cygnus simulator.
-load_base_board_description "basic-sim"
-
-# "m32r" is the name of the sim subdir in devo/sim.
-setup_sim m32r
-
-# No multilib options needed by default.
-process_multilib_options ""
-
-# We only support newlib on this target. We assume that all multilib
-# options have been specified before we get here.
-
-set_board_info compiler  "[find_gcc]"
-set_board_info cflags    "[libgloss_include_flags] [newlib_include_flags]"
-set_board_info ldflags   "[libgloss_link_flags] [newlib_link_flags]"
-
-# Configuration settings for testsuites
-set_board_info noargs 1
-set_board_info gdb,nosignals 1
-set_board_info gdb,noresults 1
-set_board_info gdb,cannot_call_functions 1
-set_board_info gdb,skip_float_tests 1
-set_board_info gdb,can_reverse 1
-set_board_info gdb,use_precord 1
-
-# More time is needed
-set_board_info gcc,timeout 800
-set_board_info gdb,timeout 60
-
-# Used by a few gcc.c-torture testcases to delimit how large the stack can
-# be.
-set_board_info gcc,stack_size  5000
-