wallee-ruby-sdk 3.0.5 → 3.1.2

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/lib/test/unit/util/procwrapper.rb

@@ -0,0 +1,48 @@
+#--
+#
+# Author:: Nathaniel Talbott.
+# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
+# License:: Ruby license.
+
+module Test
+  module Unit
+    module Util
+
+      # Allows the storage of a Proc passed through '&' in a
+      # hash.
+      #
+      # Note: this may be inefficient, since the hash being
+      # used is not necessarily very good. In Observable,
+      # efficiency is not too important, since the hash is
+      # only accessed when adding and removing listeners,
+      # not when notifying.
+
+      class ProcWrapper
+
+        # Creates a new wrapper for a_proc.
+        def initialize(a_proc)
+          @a_proc = a_proc
+          @hash = a_proc.inspect.sub(/^(#<#{a_proc.class}:)/){''}.sub(/(>)$/){''}.hex
+        end
+
+        def hash
+          return @hash
+        end
+
+        def ==(other)
+          case(other)
+          when ProcWrapper
+            return @a_proc == other.to_proc
+          else
+            return super
+          end
+        end
+        alias :eql? :==
+
+        def to_proc
+          return @a_proc
+        end
+      end
+    end
+  end
+end

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/lib/test/unit/version.rb

@@ -0,0 +1,5 @@
+module Test
+  module Unit
+    VERSION = "3.2.9"
+  end
+end

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/lib/test/unit.rb

@@ -0,0 +1,505 @@
+require 'test/unit/testcase'
+require 'test/unit/autorunner'
+
+module Test # :nodoc:
+  #
+  # = Test::Unit - Ruby Unit Testing Framework
+  # 
+  # == Introduction
+  # 
+  # Unit testing is making waves all over the place, largely due to the
+  # fact that it is a core practice of XP. While XP is great, unit testing
+  # has been around for a long time and has always been a good idea. One
+  # of the keys to good unit testing, though, is not just writing tests,
+  # but having tests. What's the difference? Well, if you just _write_ a
+  # test and throw it away, you have no guarantee that something won't
+  # change later which breaks your code. If, on the other hand, you _have_
+  # tests (obviously you have to write them first), and run them as often
+  # as possible, you slowly build up a wall of things that cannot break
+  # without you immediately knowing about it. This is when unit testing
+  # hits its peak usefulness.
+  # 
+  # Enter Test::Unit, a framework for unit testing in Ruby, helping you to
+  # design, debug and evaluate your code by making it easy to write and
+  # have tests for it.
+  # 
+  # 
+  # == Notes
+  # 
+  # Test::Unit has grown out of and superceded Lapidary.
+  # 
+  # 
+  # == Feedback
+  # 
+  # I like (and do my best to practice) XP, so I value early releases,
+  # user feedback, and clean, simple, expressive code. There is always
+  # room for improvement in everything I do, and Test::Unit is no
+  # exception. Please, let me know what you think of Test::Unit as it
+  # stands, and what you'd like to see expanded/changed/improved/etc. If
+  # you find a bug, let me know ASAP; one good way to let me know what the
+  # bug is is to submit a new test that catches it :-) Also, I'd love to
+  # hear about any successes you have with Test::Unit, and any
+  # documentation you might add will be greatly appreciated. My contact
+  # info is below.
+  # 
+  # 
+  # == Contact Information
+  # 
+  # A lot of discussion happens about Ruby in general on the ruby-talk
+  # mailing list (http://www.ruby-lang.org/en/ml.html), and you can ask
+  # any questions you might have there. I monitor the list, as do many
+  # other helpful Rubyists, and you're sure to get a quick answer. Of
+  # course, you're also welcome to email me (Nathaniel Talbott) directly
+  # at mailto:testunit@talbott.ws, and I'll do my best to help you out.
+  # 
+  # 
+  # == Credits
+  # 
+  # I'd like to thank...
+  # 
+  # Matz, for a great language!
+  # 
+  # Masaki Suketa, for his work on RubyUnit, which filled a vital need in
+  # the Ruby world for a very long time. I'm also grateful for his help in
+  # polishing Test::Unit and getting the RubyUnit compatibility layer
+  # right. His graciousness in allowing Test::Unit to supercede RubyUnit
+  # continues to be a challenge to me to be more willing to defer my own
+  # rights.
+  # 
+  # Ken McKinlay, for his interest and work on unit testing, and for his
+  # willingness to dialog about it. He was also a great help in pointing
+  # out some of the holes in the RubyUnit compatibility layer.
+  # 
+  # Dave Thomas, for the original idea that led to the extremely simple
+  # "require 'test/unit'", plus his code to improve it even more by
+  # allowing the selection of tests from the command-line. Also, without
+  # RDoc, the documentation for Test::Unit would stink a lot more than it
+  # does now.
+  # 
+  # Everyone who's helped out with bug reports, feature ideas,
+  # encouragement to continue, etc. It's a real privilege to be a part of
+  # the Ruby community.
+  # 
+  # The guys at RoleModel Software, for putting up with me repeating, "But
+  # this would be so much easier in Ruby!" whenever we're coding in Java.
+  # 
+  # My Creator, for giving me life, and giving it more abundantly.
+  # 
+  # 
+  # == License
+  # 
+  # Test::Unit is copyright (c) 2000-2003 Nathaniel Talbott. It is free
+  # software, and is distributed under the Ruby license. See the COPYING
+  # file.
+  # 
+  # Exception: lib/test/unit/diff.rb is copyright (c)
+  # 2008-2010 Kouhei Sutou and 2001-2008 Python Software
+  # Foundation. It is free software, and is distributed
+  # under the Ruby license and/or the PSF license. See the
+  # COPYING file and PSFL file.
+  # 
+  # == Warranty
+  # 
+  # This software is provided "as is" and without any express or
+  # implied warranties, including, without limitation, the implied
+  # warranties of merchantibility and fitness for a particular
+  # purpose.
+  # 
+  # 
+  # == Author
+  # 
+  # Nathaniel Talbott.
+  # Copyright (c) 2000-2003, Nathaniel Talbott
+  #
+  # ----
+  #
+  # = Usage
+  #
+  # The general idea behind unit testing is that you write a _test_
+  # _method_ that makes certain _assertions_ about your code, working
+  # against a _test_ _fixture_. A bunch of these _test_ _methods_ are
+  # bundled up into a _test_ _suite_ and can be run any time the
+  # developer wants. The results of a run are gathered in a _test_
+  # _result_ and displayed to the user through some UI. So, lets break
+  # this down and see how Test::Unit provides each of these necessary
+  # pieces.
+  #
+  #
+  # == Assertions
+  #
+  # These are the heart of the framework. Think of an assertion as a
+  # statement of expected outcome, i.e. "I assert that x should be equal
+  # to y". If, when the assertion is executed, it turns out to be
+  # correct, nothing happens, and life is good. If, on the other hand,
+  # your assertion turns out to be false, an error is propagated with
+  # pertinent information so that you can go back and make your
+  # assertion succeed, and, once again, life is good. For an explanation
+  # of the current assertions, see Test::Unit::Assertions.
+  #
+  #
+  # == Test Method & Test Fixture
+  #
+  # Obviously, these assertions have to be called within a context that
+  # knows about them and can do something meaningful with their
+  # pass/fail value. Also, it's handy to collect a bunch of related
+  # tests, each test represented by a method, into a common test class
+  # that knows how to run them. The tests will be in a separate class
+  # from the code they're testing for a couple of reasons. First of all,
+  # it allows your code to stay uncluttered with test code, making it
+  # easier to maintain. Second, it allows the tests to be stripped out
+  # for deployment, since they're really there for you, the developer,
+  # and your users don't need them. Third, and most importantly, it
+  # allows you to set up a common test fixture for your tests to run
+  # against.
+  #
+  # What's a test fixture? Well, tests do not live in a vacuum; rather,
+  # they're run against the code they are testing. Often, a collection
+  # of tests will run against a common set of data, also called a
+  # fixture. If they're all bundled into the same test class, they can
+  # all share the setting up and tearing down of that data, eliminating
+  # unnecessary duplication and making it much easier to add related
+  # tests.
+  #
+  # Test::Unit::TestCase wraps up a collection of test methods together
+  # and allows you to easily set up and tear down the same test fixture
+  # for each test. This is done by overriding #setup and/or #teardown,
+  # which will be called before and after each test method that is
+  # run. The TestCase also knows how to collect the results of your
+  # assertions into a Test::Unit::TestResult, which can then be reported
+  # back to you... but I'm getting ahead of myself. To write a test,
+  # follow these steps:
+  #
+  # * Make sure Test::Unit is in your library path.
+  # * require 'test/unit' in your test script.
+  # * Create a class that subclasses Test::Unit::TestCase.
+  # * Add a method that begins with "test" to your class.
+  # * Make assertions in your test method.
+  # * Optionally define #setup and/or #teardown to set up and/or tear
+  #   down your common test fixture.
+  # * You can now run your test as you would any other Ruby
+  #   script... try it and see!
+  #
+  # A really simple test might look like this (#setup and #teardown are
+  # commented out to indicate that they are completely optional):
+  #
+  #     require 'test/unit'
+  #     
+  #     class MyTest < Test::Unit::TestCase
+  #       # def setup
+  #       # end
+  #     
+  #       # def teardown
+  #       # end
+  #     
+  #       def test_fail
+  #         assert(false, 'Assertion was false.')
+  #       end
+  #     end
+  #
+  #
+  # == Test Runners
+  #
+  # So, now you have this great test class, but you still
+  # need a way to run it and view any failures that occur
+  # during the run. There are some test runner; console test
+  # runner, GTK+ test runner and so on. The console test
+  # runner is automatically invoked for you if you require
+  # 'test/unit' and simply run the file. To use another
+  # runner simply set default test runner ID to
+  # Test::Unit::AutoRunner:
+  #
+  #    require 'test/unit'
+  #    Test::Unit::AutoRunner.default_runner = "gtk2"
+  #
+  # == Test Suite
+  #
+  # As more and more unit tests accumulate for a given project, it
+  # becomes a real drag running them one at a time, and it also
+  # introduces the potential to overlook a failing test because you
+  # forget to run it. Suddenly it becomes very handy that the
+  # TestRunners can take any object that returns a Test::Unit::TestSuite
+  # in response to a suite method. The TestSuite can, in turn, contain
+  # other TestSuites or individual tests (typically created by a
+  # TestCase). In other words, you can easily wrap up a group of
+  # TestCases and TestSuites.
+  #
+  # Test::Unit does a little bit more for you, by wrapping
+  # these up automatically when you require
+  # 'test/unit'. What does this mean? It means you could
+  # write the above test case like this instead:
+  #
+  #  require 'test/unit'
+  #  require 'test_myfirsttests'
+  #  require 'test_moretestsbyme'
+  #  require 'test_anothersetoftests'
+  #
+  # Test::Unit is smart enough to find all the test cases existing in
+  # the ObjectSpace and wrap them up into a suite for you. It then runs
+  # the dynamic suite using the console TestRunner.
+  #
+  #
+  # == Configuration file
+  #
+  # Test::Unit reads 'test-unit.yml' in the current working
+  # directory as Test::Unit's configuration file. It can
+  # contain the following configurations:
+  #
+  # * color scheme definitions
+  # * test runner to be used
+  # * test runner options
+  # * test collector to be used
+  #
+  # Except color scheme definitions, all of them are
+  # specified by command line option.
+  #
+  # Here are sample color scheme definitions:
+  #
+  #   color_schemes:
+  #     inverted:
+  #       success:
+  #         name: red
+  #         bold: true
+  #       failure:
+  #         name: green
+  #         bold: true
+  #     other_scheme:
+  #       ...
+  #
+  # Here are the syntax of color scheme definitions:
+  #
+  #  color_schemes:
+  #    SCHEME_NAME:
+  #      EVENT_NAME:
+  #        name: COLOR_NAME
+  #        intensity: BOOLEAN
+  #        bold: BOOLEAN
+  #        italic: BOOLEAN
+  #        underline: BOOLEAN
+  #      ...
+  #    ...
+  #
+  # SCHEME_NAME:: the name of the color scheme
+  # EVENT_NAME:: one of [success, failure, pending,
+  #              omission, notification, error]
+  # COLOR_NAME:: one of [black, red, green, yellow, blue,
+  #              magenta, cyan, white]
+  # BOOLEAN:: true or false
+  #
+  # You can use the above 'inverted' color scheme with the
+  # following configuration:
+  #
+  #   runner: console
+  #   console_options:
+  #     color_scheme: inverted
+  #   color_schemes:
+  #     inverted:
+  #       success:
+  #         name: red
+  #         bold: true
+  #       failure:
+  #         name: green
+  #         bold: true
+  #
+  # == Questions?
+  #
+  # I'd really like to get feedback from all levels of Ruby
+  # practitioners about typos, grammatical errors, unclear statements,
+  # missing points, etc., in this document (or any other).
+  #
+
+  module Unit
+    class << self
+      # Set true when Test::Unit has run.  If set to true Test::Unit
+      # will not automatically run at exit.
+      #
+      # @deprecated Use Test::Unit::AutoRunner.need_auto_run= instead.
+      def run=(have_run)
+        AutoRunner.need_auto_run = (not have_run)
+      end
+
+      # Already tests have run?
+      #
+      # @deprecated Use Test::Unit::AutoRunner.need_auto_run? instead.
+      def run?
+        not AutoRunner.need_auto_run?
+      end
+
+      # @api private
+      @@at_start_hooks = []
+
+      # Regsiter a hook that is run before running tests.
+      # To register multiple hooks, call this method multiple times.
+      #
+      # Here is an example test case:
+      #   Test::Unit.at_start do
+      #     # ...
+      #   end
+      #
+      #   class TestMyClass1 < Test::Unit::TestCase
+      #     class << self
+      #       def startup
+      #         # ...
+      #       end
+      #     end
+      #
+      #     def setup
+      #       # ...
+      #     end
+      #
+      #     def test_my_class1
+      #       # ...
+      #     end
+      #
+      #     def test_my_class2
+      #       # ...
+      #     end
+      #   end
+      #
+      #   class TestMyClass2 < Test::Unit::TestCase
+      #     class << self
+      #       def startup
+      #         # ...
+      #       end
+      #     end
+      #
+      #     def setup
+      #       # ...
+      #     end
+      #
+      #     def test_my_class1
+      #       # ...
+      #     end
+      #
+      #     def test_my_class2
+      #       # ...
+      #     end
+      #   end
+      #
+      # Here is a call order:
+      # * at_start
+      # * TestMyClass1.startup
+      # * TestMyClass1#setup
+      # * TestMyClass1#test_my_class1
+      # * TestMyClass1#setup
+      # * TestMyClass1#test_my_class2
+      # * TestMyClass2#setup
+      # * TestMyClass2#test_my_class1
+      # * TestMyClass2#setup
+      # * TestMyClass2#test_my_class2
+      #
+      # @example
+      #   Test::Unit.at_start do
+      #     puts "Start!"
+      #   end
+      #
+      # @yield A block that is run before running tests.
+      # @yieldreturn [void]
+      # @return [void]
+      #
+      # @since 2.5.2
+      def at_start(&hook)
+        @@at_start_hooks << hook
+      end
+
+      # @api private
+      def run_at_start_hooks
+        @@at_start_hooks.each do |hook|
+          hook.call
+        end
+      end
+
+      # @api private
+      @@at_exit_hooks = []
+
+      # Regsiter a hook that is run after running tests.
+      # To register multiple hooks, call this method multiple times.
+      #
+      # Here is an example test case:
+      #   Test::Unit.at_exit do
+      #     # ...
+      #   end
+      #
+      #   class TestMyClass1 < Test::Unit::TestCase
+      #     class << self
+      #       def shutdown
+      #         # ...
+      #       end
+      #     end
+      #
+      #     def teardown
+      #       # ...
+      #     end
+      #
+      #     def test_my_class1
+      #       # ...
+      #     end
+      #
+      #     def test_my_class2
+      #       # ...
+      #     end
+      #   end
+      #
+      #   class TestMyClass2 < Test::Unit::TestCase
+      #     class << self
+      #       def shutdown
+      #         # ...
+      #       end
+      #     end
+      #
+      #     def teardown
+      #       # ...
+      #     end
+      #
+      #     def test_my_class1
+      #       # ...
+      #     end
+      #
+      #     def test_my_class2
+      #       # ...
+      #     end
+      #   end
+      #
+      # Here is a call order:
+      # * TestMyClass1#test_my_class1
+      # * TestMyClass1#teardown
+      # * TestMyClass1#test_my_class2
+      # * TestMyClass1#teardown
+      # * TestMyClass1.shutdown
+      # * TestMyClass2#test_my_class1
+      # * TestMyClass2#teardown
+      # * TestMyClass2#test_my_class2
+      # * TestMyClass2#teardown
+      # * TestMyClass2.shutdown
+      # * at_exit
+      #
+      # @example
+      #   Test::Unit.at_exit do
+      #     puts "Exit!"
+      #   end
+      #
+      # @yield A block that is run after running tests.
+      # @yieldreturn [void]
+      # @return [void]
+      #
+      # @since 2.5.2
+      def at_exit(&hook)
+        @@at_exit_hooks << hook
+      end
+
+      # @api private
+      def run_at_exit_hooks
+        @@at_exit_hooks.each do |hook|
+          hook.call
+        end
+      end
+    end
+  end
+end
+
+Module.new do
+  at_exit do
+    if $!.nil? and Test::Unit::AutoRunner.need_auto_run?
+      exit Test::Unit::AutoRunner.run
+    end
+  end
+end

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/lib/test-unit.rb

@@ -0,0 +1,34 @@
+# Copyright (C) 2012-2015  Kouhei Sutou <kou@clear-code.com>
+#
+# License: Ruby's or LGPLv2.1 or later
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+module Test
+  module Unit
+    autoload :TestCase, "test/unit/testcase"
+    autoload :AutoRunner, "test/unit/autorunner"
+  end
+end
+
+unless respond_to?(:run_test, true)
+  # experimental. It is for "ruby -rtest-unit -e run_test test/test_*.rb".
+  # Is this API OK or dirty?
+  def run_test
+    self.class.send(:undef_method, :run_test)
+    require "test/unit"
+  end
+end

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/sample/adder.rb

@@ -0,0 +1,13 @@
+# Author:: Nathaniel Talbott.
+# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
+# License:: Ruby license.
+
+class Adder
+  def initialize(number)
+    @number = number
+  end
+  def add(number)
+    @number + number
+  end
+end
+

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/sample/subtracter.rb

@@ -0,0 +1,12 @@
+# Author:: Nathaniel Talbott.
+# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
+# License:: Ruby license.
+
+class Subtracter
+  def initialize(number)
+    @number = number
+  end
+  def subtract(number)
+    @number - number
+  end
+end

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/sample/test_adder.rb

@@ -0,0 +1,20 @@
+# Author:: Nathaniel Talbott.
+# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
+# License:: Ruby license.
+
+require 'test/unit'
+require_relative 'adder'
+
+class TestAdder < Test::Unit::TestCase
+  def setup
+    @adder = Adder.new(5)
+  end
+
+  def test_add
+    assert_equal(7, @adder.add(2), "Should have added correctly")
+  end
+
+  def teardown
+    @adder = nil
+  end
+end

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/sample/test_subtracter.rb

@@ -0,0 +1,20 @@
+# Author:: Nathaniel Talbott.
+# Copyright:: Copyright (c) 2000-2002 Nathaniel Talbott. All rights reserved.
+# License:: Ruby license.
+
+require 'test/unit'
+require_relative 'subtracter'
+
+class TestSubtracter < Test::Unit::TestCase
+  def setup
+    @subtracter = Subtracter.new(5)
+  end
+
+  def test_subtract
+    assert_equal(3, @subtracter.subtract(2), "Should have subtracted correctly")
+  end
+
+  def teardown
+    @subtracter = nil
+  end
+end

data/vendor/bundle/ruby/2.4.0/gems/test-unit-3.2.9/sample/test_user.rb

@@ -0,0 +1,23 @@
+# nested test case example.
+require 'test/unit'
+
+class UserTest < Test::Unit::TestCase
+  def setup
+    @user = "me"
+  end
+
+  def test_full_name
+    assert_equal("me", @user)
+  end
+
+  class ProfileTest < UserTest
+    setup
+    def setup_profile
+      @user += ": profile"
+    end
+
+    def test_has_profile
+      assert_match(/: profile/, @user)
+    end
+  end
+end