video_chat_get 0.1.6 → 0.2.2

data/vendor/bundle/ruby/2.5.0/gems/rspec-mocks-3.9.1/lib/rspec/mocks.rb

@@ -1,130 +0,0 @@
-require 'rspec/support'
-RSpec::Support.require_rspec_support 'caller_filter'
-RSpec::Support.require_rspec_support 'warnings'
-RSpec::Support.require_rspec_support 'ruby_features'
-
-RSpec::Support.define_optimized_require_for_rspec(:mocks) { |f| require_relative f }
-
-%w[
-  instance_method_stasher
-  method_double
-  argument_matchers
-  example_methods
-  proxy
-  test_double
-  argument_list_matcher
-  message_expectation
-  order_group
-  error_generator
-  space
-  mutate_const
-  targets
-  syntax
-  configuration
-  verifying_double
-  version
-].each { |name| RSpec::Support.require_rspec_mocks name }
-
-# Share the top-level RSpec namespace, because we are a core supported
-# extension.
-module RSpec
-  # Contains top-level utility methods. While this contains a few
-  # public methods, these are not generally meant to be called from
-  # a test or example. They exist primarily for integration with
-  # test frameworks (such as rspec-core).
-  module Mocks
-    # Performs per-test/example setup. This should be called before
-    # an test or example begins.
-    def self.setup
-      @space_stack << (@space = space.new_scope)
-    end
-
-    # Verifies any message expectations that were set during the
-    # test or example. This should be called at the end of an example.
-    def self.verify
-      space.verify_all
-    end
-
-    # Cleans up all test double state (including any methods that were
-    # redefined on partial doubles). This _must_ be called after
-    # each example, even if an error was raised during the example.
-    def self.teardown
-      space.reset_all
-      @space_stack.pop
-      @space = @space_stack.last || @root_space
-    end
-
-    # Adds an allowance (stub) on `subject`
-    #
-    # @param subject the subject to which the message will be added
-    # @param message a symbol, representing the message that will be
-    #                added.
-    # @param opts a hash of options, :expected_from is used to set the
-    #             original call site
-    # @yield an optional implementation for the allowance
-    #
-    # @example Defines the implementation of `foo` on `bar`, using the passed block
-    #   x = 0
-    #   RSpec::Mocks.allow_message(bar, :foo) { x += 1 }
-    def self.allow_message(subject, message, opts={}, &block)
-      space.proxy_for(subject).add_stub(message, opts, &block)
-    end
-
-    # Sets a message expectation on `subject`.
-    # @param subject the subject on which the message will be expected
-    # @param message a symbol, representing the message that will be
-    #                expected.
-    # @param opts a hash of options, :expected_from is used to set the
-    #             original call site
-    # @yield an optional implementation for the expectation
-    #
-    # @example Expect the message `foo` to receive `bar`, then call it
-    #   RSpec::Mocks.expect_message(bar, :foo)
-    #   bar.foo
-    def self.expect_message(subject, message, opts={}, &block)
-      space.proxy_for(subject).add_message_expectation(message, opts, &block)
-    end
-
-    # Call the passed block and verify mocks after it has executed. This allows
-    # mock usage in arbitrary places, such as a `before(:all)` hook.
-    def self.with_temporary_scope
-      setup
-
-      begin
-        yield
-        verify
-      ensure
-        teardown
-      end
-    end
-
-    class << self
-      # @private
-      attr_reader :space
-    end
-    @space_stack = []
-    @root_space  = @space = RSpec::Mocks::RootSpace.new
-
-    # @private
-    IGNORED_BACKTRACE_LINE = 'this backtrace line is ignored'
-
-    # To speed up boot time a bit, delay loading optional or rarely
-    # used features until their first use.
-    autoload :AnyInstance,      "rspec/mocks/any_instance"
-    autoload :ExpectChain,      "rspec/mocks/message_chain"
-    autoload :StubChain,        "rspec/mocks/message_chain"
-    autoload :MarshalExtension, "rspec/mocks/marshal_extension"
-
-    # Namespace for mock-related matchers.
-    module Matchers
-      # @private
-      # just a "tag" for rspec-mock matchers detection
-      module Matcher; end
-
-      autoload :HaveReceived,        "rspec/mocks/matchers/have_received"
-      autoload :Receive,             "rspec/mocks/matchers/receive"
-      autoload :ReceiveMessageChain, "rspec/mocks/matchers/receive_message_chain"
-      autoload :ReceiveMessages,     "rspec/mocks/matchers/receive_messages"
-    end
-  end
-end

data/vendor/bundle/ruby/2.5.0/gems/rspec-support-3.9.3/Changelog.md

@@ -1,302 +0,0 @@
-### 3.9.3 / 2020-05-02
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.9.2...v3.9.3)
-
-Bug Fixes:
-
-* Mark ripper as unsupported on Truffle Ruby. (Brandon Fish, #395)
-* Mark ripper as unsupported on JRuby 9.2.0.0. (Brian Hawley, #400)
-* Capture `Mutex.new` for our `RSpec::Support:Mutex` in order to
-  allow stubbing `Mutex.new`. (Jon Rowe, #411)
-
-### 3.9.2 / 2019-12-30
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.9.1...v3.9.2)
-
-Bug Fixes:
-
-* Remove unneeded eval. (Matijs van Zuijlen, #394)
-
-### 3.9.1 / 2019-12-28
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.9.0...v3.9.1)
-
-Bug Fixes:
-
-* Remove warning caused by keyword arguments on Ruby 2.7.0.
-  (Jon Rowe, #392)
-
-### 3.9.0 / 2019-10-07
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.3...v3.9.0)
-
-*NO CHANGES*
-
-Version 3.9.0 was released to allow other RSpec gems to release 3.9.0.
-
-### 3.8.3 / 2019-10-02
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.2...v3.8.3)
-
-Bug Fixes:
-
-* Escape \r when outputting strings inside arrays.
-  (Tomita Masahiro, Jon Rowe, #378)
-* Ensure that optional hash arguments are recognised correctly vs keyword
-  arguments. (Evgeni Dzhelyov, #366)
-
-### 3.8.2 / 2019-06-10
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.1...v3.8.2)
-
-Bug Fixes:
-
-* Ensure that an empty hash is recognised as empty keyword arguments when
-  applicable. (Thomas Walpole, #375)
-* Ensure that diffing truthy values produce diffs consistently.
-  (Lucas Nestor, #377)
-
-### 3.8.1 / 2019-03-03
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.8.0...v3.8.1)
-
-Bug Fixes:
-
-* Ensure that inspecting a `SimpleDelegator` based object works regardless of
-  visibilty of the `__getobj__` method. (Jon Rowe, #369)
-
-### 3.8.0 / 2018-08-04
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.7.1...v3.8.0)
-
-Bug Fixes:
-
-* Order hash keys before diffing to improve diff accuracy when using mocked calls.
-  (James Crisp, #334)
-
-### 3.7.1 / 2018-01-29
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.7.0...v3.7.1)
-
-Bug Fixes:
-
-* Fix source extraction logic so that it does not trigger a `SystemStackError`
-  when processing deeply nested example groups. (Craig Bass, #343)
-
-### 3.7.0 / 2017-10-17
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.6.0...v3.7.0)
-
-Enhancements:
-
-* Improve compatibility with `--enable-frozen-string-literal` option
-  on Ruby 2.3+. (Pat Allan, #320)
-* Add `Support.class_of` for extracting class of any object.
-  (Yuji Nakayama, #325)
-
-Bug Fixes:
-
-* Fix recursive const support to not blow up when given buggy classes
-  that raise odd errors from `#to_str`. (Myron Marston, #317)
-
-### 3.6.0 / 2017-05-04
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.6.0.beta2...3.6.0)
-
-Enhancements:
-
-* Import `Source` classes from rspec-core. (Yuji Nakayama, #315)
-
-### 3.6.0.beta2 / 2016-12-12
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.6.0.beta1...v3.6.0.beta2)
-
-No user-facing changes.
-
-### 3.6.0.beta1 / 2016-10-09
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0...v3.6.0.beta1)
-
-Bug Fixes:
-
-* Prevent truncated formatted object output from mangling console codes. (#294, Anson Kelly)
-
-### 3.5.0 / 2016-07-01
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta4...v3.5.0)
-
-**No user facing changes since beta4**
-
-### 3.5.0.beta4 / 2016-06-05
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta3...v3.5.0.beta4)
-
-Enhancements:
-* Improve `MethodSignature` to better support keyword arguments. (#250, Rob Smith).
-
-### 3.5.0.beta3 / 2016-04-02
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta2...v3.5.0.beta3)
-
-Bug Fixes:
-
-* Fix `EncodedString` to properly handle the behavior of `String#split`
-  on JRuby when the string contains invalid bytes. (Jon Rowe, #268)
-* Fix `ObjectFormatter` so that formatting objects that don't respond to
-  `#inspect` (such as `BasicObject`) does not cause `NoMethodError`.
-  (Yuji Nakayama, #269)
-* Fix `ObjectFormatter` so that formatting recursive array or hash does not
-  cause `SystemStackError`. (Yuji Nakayama, #270, #272)
-
-### 3.5.0.beta2 / 2016-03-10
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.5.0.beta1...v3.5.0.beta2)
-
-No user-facing changes.
-
-### 3.5.0.beta1 / 2016-02-06
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.4.1...v3.5.0.beta1)
-
-Enhancements:
-
-* Improve formatting of objects by allowing truncation to a pre-configured length.
-  (Liam M, #256)
-
-### 3.4.1 / 2015-11-20
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.4.0...v3.4.1)
-
-Bug Fixes:
-
-* Fix `RSpec::Support::RubyFeature.ripper_supported?` so it returns
-  `false` on Rubinius since the Rubinius team has no plans to support
-  it. This prevents rspec-core from trying to load and use ripper to
-  extract failure snippets. (Aaron Stone, #251)
-
-Changes:
-
-* Remove `VersionChecker` in favor of `ComparableVersion`. (Yuji Nakayama, #266)
-
-### 3.4.0 / 2015-11-11
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.3.0...v3.4.0)
-
-Enhancements:
-
-* Improve formatting of `Delegator` based objects (e.g. `SimpleDelgator`) in
-  failure messages and diffs. (Andrew Horner, #215)
-* Add `ComparableVersion`. (Yuji Nakayama, #245)
-* Add `Ripper` support detection. (Yuji Nakayama, #245)
-
-Bug Fixes:
-
-* Work around bug in JRuby that reports that `attr_writer` methods
-  have no parameters, causing RSpec's verifying doubles to wrongly
-  fail when mocking or stubbing a writer method on JRuby. (Myron Marston, #225)
-
-### 3.3.0 / 2015-06-12
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.2.2...v3.3.0)
-
-Enhancements:
-
-* Improve formatting of arrays and hashes in failure messages so they
-  use our custom formatting of matchers, time objects, etc.
-  (Myron Marston, Nicholas Chmielewski, #205)
-* Use improved formatting for diffs as well. (Nicholas Chmielewski, #205)
-
-Bug Fixes:
-
-* Fix `FuzzyMatcher` so that it checks `expected == actual` rather than
-  `actual == expected`, which avoids errors in situations where the
-  `actual` object's `==` is improperly implemented to assume that only
-  objects of the same type will be given. This allows rspec-mocks'
-  `anything` to match against objects with buggy `==` definitions.
-  (Myron Marston, #193)
-
-### 3.2.2 / 2015-02-23
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.2.1...v3.2.2)
-
-Bug Fixes:
-
-* Fix an encoding issue with `EncodedString#split` when encountering an
-  invalid byte string. (Benjamin Fleischer, #1760)
-
-### 3.2.1 / 2015-02-04
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.2.0...v3.2.1)
-
-Bug Fixes:
-
-* Fix `RSpec::CallerFilter` to work on Rubinius 2.2.
-  (Myron Marston, #169)
-
-### 3.2.0 / 2015-02-03
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.1.2...v3.2.0)
-
-Enhancements:
-
-* Add extra Ruby type detection. (Jon Rowe, #133)
-* Make differ instance re-usable. (Alexey Fedorov, #160)
-
-Bug Fixes:
-
-* Do not consider `[]` and `{}` to match when performing fuzzy matching.
-  (Myron Marston, #157)
-
-### 3.1.2 / 2014-10-08
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.1.1...v3.1.2)
-
-Bug Fixes:
-
-* Fix method signature to not blow up with a `NoMethodError` on 1.8.7 when
-  verifying against an RSpec matcher. (Myron Marston, #116)
-
-### 3.1.1 / 2014-09-26
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.1.0...v3.1.1)
-
-Bug Fixes:
-
-* Fix `RSpec::Support::DirectoryMaker` (used by `rspec --init` and
-  `rails generate rspec:install`) so that it detects absolute paths
-   on Windows properly. (Scott Archer, #107, #108, #109) (Jon Rowe, #110)
-
-### 3.1.0 / 2014-09-04
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.4...v3.1.0)
-
-Bug Fixes:
-
-* Fix `FuzzyMatcher` so that it does not wrongly match a struct against
-  an array. (Myron Marston, #97)
-* Prevent infinitely recursing `#flatten` methods from causing the differ
-  to hang. (Jon Rowe, #101)
-
-### 3.0.4 / 2014-08-14
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.3...v3.0.4)
-
-Bug Fixes:
-
-* Fix `FuzzyMatcher` so that it does not silence `ArgumentError` raised
-  from broken implementations of `==`. (Myron Marston, #94)
-
-### 3.0.3 / 2014-07-21
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.2...v3.0.3)
-
-Bug Fixes:
-
-* Fix regression in `Support#method_handle_for` where proxy objects
-  with method delegated would wrongly not return a method handle.
-  (Jon Rowe, #90)
-* Properly detect Module#prepend support in Ruby 2.1+ (Ben Langfeld, #91)
-* Fix `rspec/support/warnings.rb` so it can be loaded and used in
-  isolation. (Myron Marston, #93)
-
-### 3.0.2 / 2014-06-20
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.1...v3.0.2)
-
-* Revert `BlockSignature` change from 3.0.1 because of a ruby bug that
-  caused it to change the block's behavior (https://bugs.ruby-lang.org/issues/9967).
-  (Myron Marston, rspec-mocks#721)
-
-### 3.0.1 / 2014-06-19
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0...v3.0.1)
-
-* Fix `BlockSignature` so that it correctly differentiates between
-  required and optional block args. (Myron Marston, rspec-mocks#714)
-
-### 3.0.0 / 2014-06-01
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0.rc1...v3.0.0)
-
-### 3.0.0.rc1 / 2014-05-18
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0.beta2...v3.0.0.rc1)
-
-### 3.0.0.beta2 / 2014-02-17
-[Full Changelog](http://github.com/rspec/rspec-support/compare/v3.0.0.beta1...v3.0.0.beta2)
-
-Bug Fixes:
-
-* Issue message when :replacement is passed to `RSpec.warn_with`. (Jon Rowe)
-
-### 3.0.0.beta1 / 2013-11-07
-[Full Changelog](https://github.com/rspec/rspec-support/compare/0dc12d1bdbbacc757a9989f8c09cd08ef3a4837e...v3.0.0.beta1)
-
-Initial release.

data/vendor/bundle/ruby/2.5.0/gems/rspec-support-3.9.3/LICENSE.md

@@ -1,23 +0,0 @@
-The MIT License (MIT)
-====================
-
-* Copyright © 2013 David Chelimsky, Myron Marston, Jon Rowe, Sam Phippen, Xavier Shay, Bradley Schaefer
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense, and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
-LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
-OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/vendor/bundle/ruby/2.5.0/gems/rspec-support-3.9.3/README.md

@@ -1,40 +0,0 @@
-# RSpec::Support
-
-`RSpec::Support` provides common functionality to `RSpec::Core`,
-`RSpec::Expectations` and `RSpec::Mocks`. It is considered
-suitable for internal use only at this time.
-
-## Installation / Usage
-
-Install one or more of the `RSpec` gems.
-
-Want to run against the `master` branch? You'll need to include the dependent
-RSpec repos as well. Add the following to your `Gemfile`:
-
-```ruby
-%w[rspec-core rspec-expectations rspec-mocks rspec-support].each do |lib|
-  gem lib, :git => "https://github.com/rspec/#{lib}.git", :branch => 'master'
-end
-```
-
-## Contributing
-
-Once you've set up the environment, you'll need to cd into the working
-directory of whichever repo you want to work in. From there you can run the
-specs and cucumber features, and make patches.
-
-NOTE: You do not need to use rspec-dev to work on a specific RSpec repo. You
-can treat each RSpec repo as an independent project.
-
-- [Build details](BUILD_DETAIL.md)
-- [Code of Conduct](CODE_OF_CONDUCT.md)
-- [Detailed contributing guide](CONTRIBUTING.md)
-- [Development setup guide](DEVELOPMENT.md)
-
-## Patches
-
-Please submit a pull request or a github issue. If you submit an issue, please
-include a link to either of:
-
-* a gist (or equivalent) of the patch
-* a branch or commit in your github fork of the repo

data/vendor/bundle/ruby/2.5.0/gems/rspec-support-3.9.3/lib/rspec/support/caller_filter.rb

@@ -1,83 +0,0 @@
-RSpec::Support.require_rspec_support "ruby_features"
-
-module RSpec
-  # Consistent implementation for "cleaning" the caller method to strip out
-  # non-rspec lines. This enables errors to be reported at the call site in
-  # the code using the library, which is far more useful than the particular
-  # internal method that raised an error.
-  class CallerFilter
-    RSPEC_LIBS = %w[
-      core
-      mocks
-      expectations
-      support
-      matchers
-      rails
-    ]
-
-    ADDITIONAL_TOP_LEVEL_FILES = %w[ autorun ]
-
-    LIB_REGEX = %r{/lib/rspec/(#{(RSPEC_LIBS + ADDITIONAL_TOP_LEVEL_FILES).join('|')})(\.rb|/)}
-
-    # rubygems/core_ext/kernel_require.rb isn't actually part of rspec (obviously) but we want
-    # it ignored when we are looking for the first meaningful line of the backtrace outside
-    # of RSpec. It can show up in the backtrace as the immediate first caller
-    # when `CallerFilter.first_non_rspec_line` is called from the top level of a required
-    # file, but it depends on if rubygems is loaded or not. We don't want to have to deal
-    # with this complexity in our `RSpec.deprecate` calls, so we ignore it here.
-    IGNORE_REGEX = Regexp.union(LIB_REGEX, "rubygems/core_ext/kernel_require.rb")
-
-    if RSpec::Support::RubyFeatures.caller_locations_supported?
-      # This supports args because it's more efficient when the caller specifies
-      # these. It allows us to skip frames the caller knows are part of RSpec,
-      # and to decrease the increment size if the caller is confident the line will
-      # be found in a small number of stack frames from `skip_frames`.
-      #
-      # Note that there is a risk to passing a `skip_frames` value that is too high:
-      # If it skippped the first non-rspec line, then this method would return the
-      # 2nd or 3rd (or whatever) non-rspec line. Thus, you generally shouldn't pass
-      # values for these parameters, particularly since most places that use this are
-      # not hot spots (generally it gets used for deprecation warnings). However,
-      # if you do have a hot spot that calls this, passing `skip_frames` can make
-      # a significant difference. Just make sure that that particular use is tested
-      # so that if the provided `skip_frames` changes to no longer be accurate in
-      # such a way that would return the wrong stack frame, a test will fail to tell you.
-      #
-      # See benchmarks/skip_frames_for_caller_filter.rb for measurements.
-      def self.first_non_rspec_line(skip_frames=3, increment=5)
-        # Why a default `skip_frames` of 3?
-        # By the time `caller_locations` is called below, the first 3 frames are:
-        #   lib/rspec/support/caller_filter.rb:63:in `block in first_non_rspec_line'
-        #   lib/rspec/support/caller_filter.rb:62:in `loop'
-        #   lib/rspec/support/caller_filter.rb:62:in `first_non_rspec_line'
-
-        # `caller` is an expensive method that scales linearly with the size of
-        # the stack. The performance hit for fetching it in chunks is small,
-        # and since the target line is probably near the top of the stack, the
-        # overall improvement of a chunked search like this is significant.
-        #
-        # See benchmarks/caller.rb for measurements.
-
-        # The default increment of 5 for this method are mostly arbitrary, but
-        # is chosen to give good performance on the common case of creating a double.
-
-        loop do
-          stack = caller_locations(skip_frames, increment)
-          raise "No non-lib lines in stack" unless stack
-
-          line = stack.find { |l| l.path !~ IGNORE_REGEX }
-          return line.to_s if line
-
-          skip_frames += increment
-          increment   *= 2 # The choice of two here is arbitrary.
-        end
-      end
-    else
-      # Earlier rubies do not support the two argument form of `caller`. This
-      # fallback is logically the same, but slower.
-      def self.first_non_rspec_line(*)
-        caller.find { |line| line !~ IGNORE_REGEX }
-      end
-    end
-  end
-end

data/vendor/bundle/ruby/2.5.0/gems/rspec-support-3.9.3/lib/rspec/support/comparable_version.rb

@@ -1,46 +0,0 @@
-module RSpec
-  module Support
-    # @private
-    class ComparableVersion
-      include Comparable
-
-      attr_reader :string
-
-      def initialize(string)
-        @string = string
-      end
-
-      def <=>(other)
-        other = self.class.new(other) unless other.is_a?(self.class)
-
-        return 0 if string == other.string
-
-        longer_segment_count = [self, other].map { |version| version.segments.count }.max
-
-        longer_segment_count.times do |index|
-          self_segment = segments[index] || 0
-          other_segment = other.segments[index] || 0
-
-          if self_segment.class == other_segment.class
-            result = self_segment <=> other_segment
-            return result unless result == 0
-          else
-            return self_segment.is_a?(String) ? -1 : 1
-          end
-        end
-
-        0
-      end
-
-      def segments
-        @segments ||= string.scan(/[a-z]+|\d+/i).map do |segment|
-          if segment =~ /\A\d+\z/
-            segment.to_i
-          else
-            segment
-          end
-        end
-      end
-    end
-  end
-end