ver 2010.02 → 2010.08

data/config/commands/Matlab.rb

@@ -0,0 +1,188 @@
+# Encoding: UTF-8
+
+[{beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n# Replace != with ~= for the novice user\nline = ENV['TM_LINE_NUMBER'].to_i\ncolumns = ENV['TM_LINE_INDEX'].to_i-1\ntextArray = STDIN.readlines\nprint textArray.last. to_s.sub(/\\!/,'~=')\n",
+  fallbackInput: "line",
+  input: "selection",
+  keyEquivalent: "=",
+  name: "= after !",
+  output: "insertAsSnippet",
+  scope: "variable.other.exclamation.matlab",
+  uuid: "563CDF89-C286-4CDB-94AB-30819104470F"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\nif ENV.has_key?('TM_SELECTED_TEXT') then\n\tresult = ENV['TM_SELECTED_TEXT'].strip\n\tcase result\n\twhen /'.*'/\n\t\t@pad = \"' '\"\n\telse\n\t\t@pad = \"0\"\n\tend\n\t@input_table = result.to_a.collect {|row| row.chomp.split(/\\s+|,/)}\n\trows = @input_table.length\n\tcolumns = @input_table.inject { |memo, row| memo.length > row.length ? memo : row }.length\nelse\n\tresult=`\"$TM_SUPPORT_PATH/bin\"/CocoaDialog.app/Contents/MacOS/CocoaDialog standard-inputbox \\\n\t--title 'Matlab Array Creation' \\\n\t--informative-text 'Number of rows and columns:' \\\n\t--text '6 4'`.split\n\texit if result[0] == \"2\" || result.length == 1\n\t@input_table = nil\n\tresult.collect! { |num| num.to_i}\n\tresult[2] = result[1] if result.length == 2\n\t# We'll only create up to two-dimensional arrays\n\t# with up to N elements\n\tN = 200\n\tproduct = result[1..2].inject(1) {|product, num| product * num }\n\tif product.zero?\n\t\t# give error message\n\t\texit\n\telsif product > N\n\t\topen('|\"$DIALOG\" tooltip', 'w') do |io|\n\t\t\tio << \"The matrix dimensions are too large.\\nThe maximum is set to \#{N} elements.\"\n\t\tend\n\t\texit\n\telse\n\t\trows, columns = result[1..2]\n\tend\nend\n\n@pos = 0\ndef self.insert(row,column)\n\tif @input_table.nil?\n\t\t@pos += 1\n\t\t\"${\#{@pos}:\#{@pos}}\"\n\telse\n\t\tret = @input_table[row][column]\n\t\tif ret.nil?\n\t\t\t@pos += 1\n\t\t\t\"${\#{@pos}:\#{@pad}}\"\n\t\telse\n\t\t\tret\n\t\tend\n\tend\nend\n\ntable = \"\"\ntable += \"[\" if rows > 1\nrows.times do |m|\n\ttable += \"[\"\n\tcolumns.times do |n|\n\t\ttable += insert(m,n)\n\t\ttable += (n == columns-1) ? \"]\" : \"\\t\"\n\tend\n\ttable += \";\\n\" unless (m == rows-1)\nend\ntable += \"]\" if rows > 1\ntable += \"${\#{@pos+1}:;}\\n$0\"\nputs table\n",
+  fallbackInput: "none",
+  input: "selection",
+  keyEquivalent: "^@T",
+  name: "Create matrix",
+  output: "insertAsSnippet",
+  scope: "source.matlab, source.octave",
+  uuid: "F23DAE9B-A27A-41D3-B57B-DED30729243C"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\ntextarray = STDIN.readlines\ncurrentline = ENV['TM_LINE_NUMBER'].to_i\nnumlines = textarray.size.to_i\nlineindex = ENV['TM_LINE_INDEX'].to_i\nthisline = ENV['TM_CURRENT_LINE']\ncolumns = ENV['TM_LINE_INDEX'].to_i\n\n\nif (textarray.size == currentline) && (textarray.last.length == lineindex)\n    # We're at the very end.\n    if thisline.slice(0...lineindex).slice(/(\\)|\\])$/)\n        # We're outside closed brackets/parens. Just insert an enter\n        print \"\\n\"\n    else\n        print \" ...\\n\"\n    end\nelse\n    # Let's add some dots. If we already have a dot or two, we won't print all three dots\n    dots = thisline.slice(0...lineindex).slice(/\\.+$/).to_s.length\n    case dots\n    when 0\n        print \" ...\"\n    when 1\n        print \"..\"\n    when 2\n        print \".\"\n    end\n    print \"\\n\"\nend\n",
+  fallbackInput: "scope",
+  input: "document",
+  keyEquivalent: "\n",
+  name: "Enter in Brackets or Parens Scope",
+  output: "insertAsSnippet",
+  scope: 
+   "(meta.brackets.matlab|meta.brackets.octave) - string.quoted.single.matlab,(meta.parens.matlab|meta.parens.octave) - string.quoted.single.matlab,(meta.brackets.curly.matlab|meta.brackets.curly.octave) - string.quoted.single.matlab",
+  uuid: "8A857EDA-B07B-4304-BA10-29C3D22A3B1B"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\nthisline = ENV['TM_CURRENT_LINE']\nsoft_tabs = ENV['TM_SOFT_TABS']\ntab_size = ENV['TM_TAB_SIZE'].to_i\n# thisline = \"asdfasd f\t\t\t\t% asdfasdfadsfasd\"\n# thisline = \"aasdfasd ff\t\t\t\t% asdfasdfadsfasd\"\n# thisline = \"aasdfasd fff\t\t\t\t% asdfasdfadsfasd\"\nspaces = thisline.match(/^(.*?)(%%|%|#)(\\s*).*$/)\n\nleading_spaces = spaces.captures[0].gsub(/[^\\t]{4}/,\"\\t\").gsub(/[^\\t]{1,3}\\t/,\"\\t\")\n\nif spaces.captures[0] =~ /\\S/\n\tleading_spaces.gsub!(/\\t/,\"\".ljust(tab_size)) if ENV['TM_SOFT_TABS'] == \"YES\"\nelse\n\tleading_spaces = \"\"\nend\n\nprint \"\\n\#{leading_spaces}\#{spaces.captures[1] + spaces.captures[2]}$1\"\n",
+  input: "none",
+  keyEquivalent: "",
+  name: "Enter in Comment",
+  output: "insertAsSnippet",
+  scope: 
+   "comment.line.percentage.matlab, comment.double.percentage.matlab, comment.line.percentage.octave, comment.double.percentage.octave, comment.line.pound.octave",
+  uuid: "615CF7DB-FDB1-4013-9725-FDF4BE64E8A4"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\nlineindex = ENV['TM_LINE_INDEX'].to_i\nthisline = ENV['TM_CURRENT_LINE']\nscopes = ENV['TM_SCOPE'].split\n\nfirsthalf = thisline.slice(0...lineindex)\nsecondhalf = thisline.slice(lineindex..-1)\n\nif scopes[0] == \"source.matlab\"\n\tfirsthalf.sub!(/\\s*\\.*\\s*$/,\" ...\")\nelsif scopes[0] == \"source.octave\"\n\tfirsthalf.sub!(/\\s*(\\.*|\\\\)\\s*$/,\" ...\")\nend\nfirsthalf += \"\\n\"\nprint firsthalf, '$1', secondhalf\n\n",
+  fallbackInput: "line",
+  input: "selection",
+  keyEquivalent: "\n",
+  name: "Enter in Incomplete Variable Assignment",
+  output: "insertAsSnippet",
+  scope: 
+   "source.matlab invalid.illegal.incomplete-variable-assignment.matlab, source.octave invalid.illegal.incomplete-variable-assignment.matlab",
+  uuid: "FD9512A7-561A-4140-A425-567B8D2862EA"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\n# Due to many special cases, this is rather ugly.\n\n# Set up all parameters\ndebug = false\ntextarray = STDIN.readlines\nlinenumber = ENV['TM_LINE_NUMBER'].to_i\nnumlines = textarray.size\n# Adjust for missing empty last line if last character is a newline\nnumlines += 1 if textarray.last[-1] == 10\nlineindex = ENV['TM_LINE_INDEX'].to_i\nscopes = ENV['TM_SCOPE'].split\npreceding_string = scopes.index(\"punctuation.definition.string.begin.matlab\")\nescaped_quote = scopes.index(\"constant.character.escape.matlab\")\nif debug\n    print \"preceding_string\", \"\\t\\t= ___\", preceding_string, \"___\\n\"\n    print \"escaped_quote\", \"\\t\\t= ___\", escaped_quote, \"___\\n\"\nend\n\nthisline = ENV['TM_CURRENT_LINE']\nfirsthalf = thisline.slice(0...lineindex).gsub(/\\$/,\"\\\\\\$\")\nsecondhalf = thisline.slice(lineindex...thisline.length).gsub(/\\$/,\"\\\\\\$\")\n\natEOL = (thisline.length == lineindex)\natEOF = (atEOL && numlines == linenumber)\nfirstmatch = firsthalf.match(/(')(('{2}|[^'])*)(')?$/)\nsecondmatch = secondhalf.match(/(')?(('{2}|[^'])*)(')?/)\n\nif atEOF\n    if firstmatch.nil?\n        puts \"we have no quotes on this line\" if debug\n        # insert closing quote on preceding line and an enter\n    elsif firstmatch.captures.last == \"'\"\n        puts \"we have a closing quote. insert enter\" if debug\n        firsthalf += \"\\n\"\n    else\n        puts \"we must close the string and insert an enter\" if debug\n        firsthalf += \"'\\n\"\n    end\nelse\n    if preceding_string\n        puts \"we're preceding a string. insert dots and an enter\" if debug\n        # check for =-+/*\n        firsthalf += \" ...\" unless firsthalf.match(/[\\=\\+\\-\\*\\/]\\s*$/).nil?\n        firsthalf += \"\\n\"\n    elsif atEOL\n        puts \"we're at the end of the line. insert a quote and an enter\" if debug\n        firsthalf += \"'\" if secondmatch.captures.first.nil? && secondmatch.captures.last.nil? && firstmatch.captures.last.nil?\n        firsthalf += \"\\n\"\n    else\n        # check if firsthalf is a closed string\n        firsthalf.insert(firstmatch.begin(0),\"[\")\n        if firstmatch.captures.last == \"'\"\n            puts \"first half is a closed string. insert brackets and dots\" if debug\n        else\n            puts \"first half is not closed. insert brackets, closing quote, and dots\" if debug\n            firsthalf += \"'\"\n        end\n        firsthalf += \" ...\\n\"\n        \n        if secondmatch.captures.first.nil?\n            puts \"second half has no opening quote. insert leading quote and closing bracket\" if debug\n            secondhalf = \"'\" + secondhalf\n        end\n        if secondmatch.captures.last.nil?\n            puts \"second half has no closing quote. insert ending quote\" if debug\n            secondhalf += \"']\"\n        else\n            puts \"second half has no closing bracket. insert ending bracket\" if debug\n            bias = secondmatch.captures.first.nil? ? 1 : 0 # compensate index for added quote\n            secondhalf.insert(secondmatch.end(0) + bias,\"]\")\n        end\n    end\nend\n\nif debug\n    print \"linenumber\", \"\\t= ___\", linenumber, \"___\\n\"\n    print \"numlines\", \"\\t= ___\", numlines, \"___\\n\"\n    print \"lineindex\", \"\\t= ___\", lineindex, \"___\\n\"\n    print \"firsthalf\", \"\\t= ___\", firsthalf, \"___\\n\"\n    print \"secondhalf\", \"\\t= ___\", secondhalf, \"___\\n\"\n    print \"scopes\", \"\\t\\t= ___\", scopes, \"___\\n\"\n    print \"preceding_string\", \"\\t\\t= ___\", preceding_string, \"___\\n\"\n    print \"escaped_quote\", \"\\t\\t= ___\", escaped_quote, \"___\\n\"\n    print \"atEOL\", \"\\t\\t= ___\", atEOL, \"___\\n\"\n    print \"atEOF\", \"\\t\\t= ___\", atEOF, \"___\\n\"\n    print \"debug\", \"\\t\\t= ___\", debug, \"___\\n\"\n    print \"firstmatch\", \"\\t= ___\", firstmatch, \"___\\n\"\n    print \"firstmatch.begin(0)\", \"\\t= ___\", firstmatch.begin(0), \"___\\n\"\n    print \"secondmatch\", \"\\t= ___\", secondmatch, \"___\\n\"\n    print \"secondmatch.end(3)\", \"\\t= ___\", firstmatch.begin(3), \"___\\n\"\n    print \"firstmatch.captures\\t\\t\", firstmatch.captures.inspect, \"\\n\"\n    print \"secondmatch.captures\\t\", secondmatch.captures.inspect, \"\\n\"\nend\n\nprint firsthalf, '$1', secondhalf\n",
+  fallbackInput: "line",
+  input: "selection",
+  keyEquivalent: "\n",
+  name: "Enter in String",
+  output: "insertAsSnippet",
+  scope: 
+   "string.quoted.single.matlab - meta.brackets.matlab, string.quoted.single.matlab - meta.parens.matlab",
+  uuid: "12A5489D-0A50-4420-A53D-FB0C6A2794CD"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\ntextarray = STDIN.readlines\ncurrentline = ENV['TM_LINE_NUMBER'].to_i\nnumlines = textarray.size.to_i\nlineindex = ENV['TM_LINE_INDEX'].to_i\nthisline = ENV['TM_CURRENT_LINE']\ncolumns = ENV['TM_LINE_INDEX'].to_i\nif columns == 0 && thisline[0] == ?'\n    print \"...\\n\"\nelse\n    if thisline.slice(0...lineindex).slice(/\\'+$/).to_s.length.modulo(2) == 0\n        # We must insert a quote\n        print \"'\"\n    end\n    if (textarray.size == currentline) && (textarray.last.length == lineindex)\n        # We're at the very end. If the last character is a quotation mark\n        # we'll not add a leading quote.\n        print \" ...\\n'$1']\"\n    else\n        print \" ...\\n'\"\n    end\nend",
+  input: "document",
+  keyEquivalent: "\n",
+  name: "Enter in String in Brackets Scope",
+  output: "insertAsSnippet",
+  scope: "meta.brackets.matlab string.quoted.single.matlab",
+  uuid: "732F1DA4-166B-44AF-88CD-5A944574D3CC"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "if grep <<<${TM_CURRENT_WORD:-!} -Esq '[a-zA-Z0-9_]+'\n\tthen exit_show_html \"<meta http-equiv='Refresh' content='0;URL=http://www.mathworks.com/access/helpdesk/help/techdoc/index.html?/access/helpdesk/help/techdoc/ref/${TM_CURRENT_WORD}.html'>\"\n\telse echo \"Nothing to lookup (hint: place the caret on a function name)\"\nfi\n",
+  fallbackInput: "word",
+  input: "selection",
+  keyEquivalent: "^h",
+  name: "Function Documentation",
+  output: "showAsHTML",
+  scope: "source.matlab",
+  uuid: "033730AF-96F5-4F0C-9199-E0683D40A22C"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\nwidth = 80\n\ntopbottom = \"%%\".ljust(width,\"=\") + \"\\n\"\n\nprint topbottom\nprint \"%%${1/^\" + \"(.)?\"*(width-2) + \".*$/\"\n1.upto(width-2) { |i| print \"(?\#{i}:: )\" }\nprint \"/}${1:Header}\" + \"\\n\"\nprint topbottom\n",
+  input: "none",
+  name: "Insert header comment",
+  output: "insertAsSnippet",
+  scope: "source.matlab, source.octave",
+  tabTrigger: "head",
+  uuid: "AD7201FB-23AD-4105-B8E3-5AAD29419FA6"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\nwidth = 80\nbuffer = 5\n\nprint \"%%${1/^\" + \"(.)?\"*(width) + \".*$/\"\n1.upto(width-2-buffer) { |i| print \"(?\#{i}::=)\" }\nprint \"/}\".ljust(buffer+2)\nprint \"${1:Header}\" + \"\\n$0\"\n",
+  input: "none",
+  name: "Insert section division",
+  output: "insertAsSnippet",
+  scope: "source.matlab, source.octave",
+  tabTrigger: "div",
+  uuid: "D21BACE2-24A1-43EF-854C-460F5A55694E"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env python\n\nimport sys,os\nsys.path.append(os.environ['TM_SUPPORT_PATH'] + '/lib')\n\nimport dialog\n\nline_no = int(os.environ.get('TM_LINE_NUMBER'))-1\nlines = sys.stdin.readlines()\n\ntry: \n    sel = os.environ['TM_SELECTED_TEXT']\nexcept KeyError:\n    pass\nelse:\n    try:\n        var = dialog.get_string(text='Enter new variable name', \n        prompt='Variable name:')\n    except AttributeError:\n        print '% Please update your support directory'\n        var = 'var'\n\n    term = os.environ.get('TM_LINE_TERMINATOR') or ';'\n    lines[line_no] = lines[line_no].replace(sel, var)\n    lines.insert(line_no, '%s = %s%s\\n' % (var, sel, term))\n\nfor line in lines:\n\tprint line,",
+  input: "document",
+  keyEquivalent: "^C",
+  name: "Introduce variable (line)",
+  output: "replaceDocument",
+  scope: "source.matlab,source.python",
+  uuid: "40B52D65-1B7C-4874-AA30-B4C95089CE55"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env python\n\nimport sys,os\nsys.path.append(os.environ['TM_SUPPORT_PATH'] + '/lib')\n\nimport dialog\n\ndef first_occurance(arr, str):\n    \"\"\"find first_occurance of str in an array of strings\"\"\"\n    line_no = 0\n    # Find first instance of `sel`\n    for line in lines:\n        try:\n            line.index(sel)\n            line_no = lines.index(line)\n            break\n        except ValueError:\n            pass\n    \n    return line_no\n\nlines = sys.stdin.readlines()\nsel = ''\nvar = ''\n\ntry: \n    sel = os.environ['TM_SELECTED_TEXT']\nexcept KeyError:\n    pass\nelse:\n    line_no = first_occurance(lines, sel)-1\n    try:\n        var = dialog.get_string(text='Enter new variable name', \n        prompt='Variable name:')\n    except AttributeError:\n        print '% Please update your support directory'\n        var = 'var'\n\nfor line in lines[0:line_no]:\n\tprint line.replace(sel, var),\n\nterm = os.environ.get('TM_LINE_TERMINATOR') or ';'\nprint '%s = %s%s\\n' % (var, sel, term),\n\nfor line in lines[line_no:]:\n\tprint line.replace(sel, var),\n\n",
+  input: "document",
+  keyEquivalent: "^C",
+  name: "Introduce variable (throughout)",
+  output: "replaceDocument",
+  scope: "source.matlab,source.python",
+  uuid: "4B350792-24A2-4083-A8FB-509DF4BD709A"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "f=`find . \"$HOME/matlab\" /Applications/MATLAB* -name \"${TM_SELECTED_TEXT:-$TM_CURRENT_WORD}.m\"|head -1`\n\nif [[ -e \"$f\" ]]\n  then open -a TextMate \"$f\"\n  else echo \"File could not be found.\"\nfi\n",
+  input: "none",
+  keyEquivalent: "@O",
+  name: "Open Function",
+  output: "showAsTooltip",
+  scope: "source.matlab",
+  uuid: "D7A8ED42-49E0-4CF3-A6C8-BE8DAB76267A"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\ninput = STDIN.readlines\n\ninput.each do |str|\n  puts case str\n  when /\\A(.*?)#+\\s*(.*)$/: $1 + ENV['TM_COMMENT_START'] + $2  \n  when /\\A(.*?)%+\\s*(.*)$/: $1 + ENV['TM_COMMENT_START'] + $2  \n  # Default case\n  else str\n  end\nend\n",
+  fallbackInput: "line",
+  input: "document",
+  keyEquivalent: "^@C",
+  name: "Replace comments with default",
+  output: "replaceDocument",
+  scope: "source.matlab, source.octave",
+  uuid: "321567FE-2E57-4D5C-BEFB-98FE869FF4D7"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n\nprint case str = STDIN.read\n  when /\\A(.*?)\\%(.*)$/: $1 + '#' + $2  \n  when /\\A(.*?)#(.*)$/: $1 + '%' + $2\n  # Default case\n  else str\nend\n",
+  fallbackInput: "line",
+  input: "selection",
+  keyEquivalent: "@C",
+  name: "Toggle comment style",
+  output: "replaceSelectedText",
+  scope: "source.matlab, source.octave",
+  uuid: "BEAE3101-B710-4BDE-A178-247F9FB6C018"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\nrequire ENV[\"TM_BUNDLE_SUPPORT\"] + \"/lib/MATLABUtils.rb\"\ninclude MATLAB\nvariables = MATLAB.get_variables\nputs \"clear('${1:\#{variables.join(\"','\")}}'$2);\"\n",
+  input: "document",
+  name: "clear",
+  output: "insertAsSnippet",
+  scope: "source.matlab, source.octave",
+  tabTrigger: "cl",
+  uuid: "31D0DE27-0382-4F5F-B005-351F9D9B4589"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n# Wrap the current word or selected text in num2str()\n# or insert \" if there is no word\n\nseltext = ENV['TM_SELECTED_TEXT'].to_s \ncurword = ENV['TM_CURRENT_WORD'].to_s\n\nif !seltext.empty?\n\tprint \"num2str(\", seltext, \")\"\nelsif  !curword.empty?\n\tprint \"num2str(\", curword, \")\"\nelse\n    print \"\\\"\"\nend",
+  fallbackInput: "word",
+  input: "selection",
+  keyEquivalent: "^'",
+  name: "num2str",
+  output: "insertAsSnippet",
+  scope: 
+   "(source.matlab|source.octave) - (string.quoted.single.matlab | comment.line.percentage.matlab | comment.double.percentage.matlab)",
+  uuid: "6F519B71-2D99-455B-9E4A-F614FD9CA253"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\nrequire ENV[\"TM_BUNDLE_SUPPORT\"] + \"/lib/MATLABUtils.rb\"\ninclude MATLAB\nvariables = MATLAB.get_variables\nputs \"save(${1:'${2:filename}'},${3:'${4:\#{variables.join(\"','\")}}'}$5);\"\n",
+  input: "document",
+  name: "save",
+  output: "insertAsSnippet",
+  scope: "source.matlab, source.octave",
+  tabTrigger: "save",
+  uuid: "EA2AB0C2-A215-4503-930C-785CDF66F95B"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "#!/usr/bin/env ruby\n#\n# Looks through code, finds the last subplot function\n# and pre-populates the new subplot call with values\n# from last function. If the input values are numeric,\n# we increment the last argument.\n#\nlinesbefore = ENV['TM_LINE_NUMBER'].to_i-1\ncolumns = ENV['TM_LINE_INDEX'].to_i\ntextArray = STDIN.readlines\nmyStr = textArray[0...linesbefore].join\nmyStr << textArray[linesbefore].to_s.slice(0...columns)\n\nif myStr =~ /.*(subplot\\()(\\w+[*]?)(\\,)(\\w+[*]?)(\\,)(\\w+[*]?)(\\))/m\n  subrows, subcols, subthis = $2, $4, $6\n\n  # We have a pure number\n  subthis = subthis.to_i + 1 if subthis =~ /\\A\\d+\\z/\nelse\n  subrows = \"rows\"\n  subcols = \"cols\"\n  subthis = \"current\"\nend\n\nprint \"subplot(${1:\", subrows, \"},\"\nprint \"${2:\", subcols, \"},\"\nprint \"${3:\", subthis, \"})${4:, }$0\"",
+  fallbackInput: "document",
+  input: "document",
+  name: "subplot",
+  output: "insertAsSnippet",
+  scope: "source.matlab, source.octave",
+  tabTrigger: "sub",
+  uuid: "F674E1B2-5BA5-4397-9D54-D48623E9F2FD"}]

data/config/commands/Maven.rb

@@ -0,0 +1,162 @@
+# Encoding: UTF-8
+
+[{autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t clean",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Clean",
+  output: "showAsHTML",
+  uuid: "B1E0991E-106F-452B-8AA5-17564847EDA6"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t compile",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Compile",
+  output: "showAsHTML",
+  uuid: "BDD18676-3D30-41CD-A556-548838A41F3E"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t deploy",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Deploy",
+  output: "showAsHTML",
+  uuid: "A3443F7C-CBE3-4698-BE25-040AF1297E29"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t install",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Install",
+  output: "showAsHTML",
+  uuid: "A2EAF58E-7C18-4E5A-93B9-6C249696CAFD"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t integration-test",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Integration Test",
+  output: "showAsHTML",
+  uuid: "F1DA338C-FD12-4EFF-9BA6-67EFA3DCDFF3"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "settings=~/.m2/settings.xml\nif [ -f \"$settings\" ]\nthen\n\topen -a TextMate ~/.m2/settings.xml\nelse\n\tTextMate.exit_show_tooltip \"‘$settings’ does not exist\"\nfi ",
+  input: "none",
+  keyEquivalent: "^@S",
+  name: "Open personal settings.xml",
+  output: "showAsTooltip",
+  uuid: "A69B943D-83B8-467E-A6AC-0CDF9A288EB9"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t package",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Package",
+  output: "showAsHTML",
+  uuid: "D421D75D-DBDE-4993-9686-E4208DD4A87E"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -P",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Profiles",
+  output: "showAsTooltip",
+  uuid: "E7EA03BE-2FE5-45E7-A0C6-64B0BBCBA738"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -p ",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Redo Previous Task",
+  output: "showAsHTML",
+  uuid: "862B0BB5-7D5D-42FC-BF41-E0A773A6590F"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t release:branch",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Release Branch",
+  output: "showAsHTML",
+  uuid: "1BFA4873-D0F9-47A1-B4D4-22325F5FD4F3"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t release:clean",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Release Clean",
+  output: "showAsHTML",
+  uuid: "9F2DDE9A-18C6-43B1-8F1C-A05776AF3663"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t release:perform",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Release Perform",
+  output: "showAsHTML",
+  uuid: "DBCA3485-7EAE-46DE-ADA7-1CB754F6A7A8"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t release:prepare",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Release Prepare",
+  output: "showAsHTML",
+  uuid: "73AF2F5B-353A-40C7-A72F-50D4AF95450D"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t release:rollback",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Release Rollback",
+  output: "showAsHTML",
+  uuid: "AFC4DAFC-92ED-467D-89F1-F4ECFD784C4F"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Run Arbitrary Task …",
+  output: "showAsHTML",
+  uuid: "797B1987-A4CD-48D9-BE92-56351F22F6AB"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t site:site",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Site Generate",
+  output: "showAsHTML",
+  uuid: "A66DFCA3-C5F5-48F2-AB48-D0CC38436E76"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t site:run\n\nopen 'http://localhost:8080/'",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Site Run",
+  output: "showAsHTML",
+  uuid: "E7AF434A-F2F7-431B-B796-403C35E2EBDF"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t test",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Test",
+  output: "showAsHTML",
+  uuid: "C72F43DD-60E7-4F7C-B63B-84ADC3E1B67A"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -f \"$TM_FILENAME\"",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Test Current File",
+  output: "showAsHTML",
+  uuid: "2D3E0685-1F92-47E8-AE17-07F7B15AEDD2"},
+ {autoScrollOutput: true,
+  beforeRunningCommand: "nop",
+  command: "mavenmate.sh -t verify",
+  input: "none",
+  keyEquivalent: "^@M",
+  name: "Verify",
+  output: "showAsHTML",
+  uuid: "2FF6439B-3FB8-4502-825C-D1ED23F4D982"}]

data/config/commands/Mediawiki.rb

@@ -0,0 +1,12 @@
+# Encoding: UTF-8
+
+[{beforeRunningCommand: "nop",
+  bundleUUID: "D99E8C0C-792F-11D9-A212-000D93B3A10E",
+  command: 
+   ". \"$TM_SUPPORT_PATH/lib/webpreview.sh\"\nhtml_header \"Mediawiki Cheat Sheet\"\nMarkdown.pl <<MARKDOWN\n## Paragraphs ##\n\n    Two line breaks\n    will signify\n    a paragraph.\n    \n    New paragraph starts\n    here.\n    \n    For a linebreak, just\n    use <br/> the html tag\n\n## Phrase Emphasis ##\n\n\t''italics''\n\t'''bold'''\n\n## Links ##\n\nExternal:\n\n\tAn [http://url.com/ example].\n\nWiki-links:\n\n\tAn [[example]] wikilink, possibly even\n\tfrom another namespace: [[talk:example]].\n\tRenaming [[hyperlink|links]] is easy.\n\nCategories:  add the page to a category as follows:\n\n    [[category:example]]\n\n## Images ##\n\nNot floated:\n\n\t[[Image:example.png]]\n\nThumbnail, with a caption, floated left, 200 pixels wide:\n\n    [[Image:example.png|left|200px|Floating!]]\n\nLink to the image, but don't show it on the page:\n\n    [[:Image:example.png|example.png]]\n\n## Headers ##\n\n\n\t== Header 2 ==\n\n\t=== Header 3 ===\n\n\t====== Header 6 ======\n\n\n## Lists ##\n\nOrdered:\n\n\t#  Foo\n\t#  Bar\n\nUnordered:\n\n\t* A list item. <br> With a line break.\n\t* Bar\n\nDefinition:\n\n    ; a term\n    : some defining\n    : and more defining\n    ; and another term : definition\n\nThey can be nested:\n\n\t* Abacus\n    ** answer\n\t* Bubbles\n\t*# bunk\n    *# bupkis\n    *#; BELITTLER : one who belittles\n\t*# burper\n\t* Cunning\n\nDefinitions, without the word they are defining, are used\nto indent talk pages:\n\n    Delete this article! [[user:spam]]\n    : No, it's great! [[user:eggs]]\n\n## Signatures ##\n\nComments should be signed:\n\n    ~~~ is my signature\n    ~~~~ is my signature with datestamp\n    ~~~~~ is just the datestamp\n\n## Use HTML for other formatting ##\n\nFor a monospaced font:\n\n    use the <tt>tt</tt> tag.\n\nTo center text:\n\n    <center>put me in the middle</center>\n\nFor a blockquote:\n\n    <blockquote>To be or not to be…</blockquote>\n\n\n## Prevent wiki formatting ##\n\n    Use the <nowiki>'''tag'' to write\n    '''about''</nowiki> mediawiki code\n    itself, or suppress rendering for\n    some other reason.\n\n## Templates ##\n\nOne page can be transcluded in another page\nby using a template:\n\n    {{templates}} go in curly braces\n\n## Horizontal Rules ##\n\nFour or more dashes:\n\n\t----\n\nMARKDOWN\nhtml_footer",
+  input: "none",
+  keyEquivalent: "^h",
+  name: "Syntax Cheat Sheet",
+  output: "showAsHTML",
+  scope: "text.html.mediawiki",
+  uuid: "873BDE02-80C9-44F4-910B-234EF7702D01"}]

data/config/commands/Mercurial.rb

@@ -0,0 +1,185 @@
+# Encoding: UTF-8
+
+[{beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n\"${TM_RUBY:-ruby}\" -r \"$TM_SUPPORT_PATH/lib/shelltokenize.rb\" <<END\n\thg = ENV['TM_HG'] || \"hg\"\n\tputs %x{\#{hg} add \#{TextMate.selected_paths_for_shell}}\nEND\n\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Add",
+  output: "showAsTooltip",
+  uuid: "A6F3AB3E-FB21-4E93-B672-E41100E88E41"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n$TM_HG add\n$TM_HG remove --after\n\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "AddRemove",
+  output: "showAsTooltip",
+  uuid: "865D7DE7-A07B-47C1-AEDC-4A88317A0EB1"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n\"$TM_HG\" annotate -nud \"$TM_FILEPATH\" 2>&1 \\\n|\"${TM_RUBY:-ruby}\" -- \"${TM_BUNDLE_SUPPORT}/format_annotate.rb\"",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Annotate",
+  output: "showAsHTML",
+  uuid: "2593B8FB-279E-4BD1-8935-0D9B1699526F"},
+ {beforeRunningCommand: "saveModifiedFiles",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nexport TM_HG\nexport CommitWindow=\"$TM_SUPPORT_PATH/bin/CommitWindow.app/Contents/MacOS/CommitWindow\"\n\ncd \"${TM_PROJECT_DIRECTORY:-$TM_DIRECTORY}\"\n\"${TM_RUBY:-ruby}\" -- \"${TM_BUNDLE_SUPPORT}/hg_commit.rb\"",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Commit",
+  output: "showAsHTML",
+  uuid: "A6254651-3866-4F78-8774-10FA1C1D7A6B"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"\nfi\n\nrevs=$(\"$TM_HG\" log -q \"$TM_FILEPATH\" \\\n\t2> >(CocoaDialog progressbar --indeterminate \\\n\t\t--title \"Diff Revisions…\" \\\n\t\t--text \"Retrieving List of Revisions…\" \\\n\t))\n\nrevs=`osascript <<END\n\tset theResult to false\n\tset AppleScript's text item delimiters to {\"\\n\",\"\\r\"}\n\ttell app \"SystemUIServer\"\n\t\tactivate\n\t\tset ourList to (every text item of \"$revs\")\n\t\tif the count of items in ourList is 0 then\n\t\t\tdisplay dialog \"No revisions of file '$TM_FILENAME' found\" buttons (\"Continue\") default button 1\n\t\telse\n\t\t\ttell app \"SystemUIServer\" to choose from list (every text item of \"$revs\") with prompt \"Please choose two revisions of '$TM_FILENAME':\" with multiple selections allowed\n\n\t\t\tset theitems to the result\n\t\t\tif theitems is not false then\n\t\t\t\tif the count of items in the theitems is less than 2 then\n\t\t\t\t\tdisplay dialog \"Please select two revisions (hold down the shift key to select multiple revisions).\" buttons (\"Continue\") default button 1\n\t\t\t\telse\n\t\t\t\t\tset theResult to (item 1 of theitems) & return & (item 2 of theitems)\n\t\t\t\tend if\n\t\t\tend if \n\t\tend if\n\t\tset the result to theResult\n\tend tell\nEND`\n\n# exit if user canceled\nif [[ $revs = \"false\" ]]; then\n\tosascript -e 'tell app \"TextMate\" to activate' &>/dev/null &\texit_discard\nfi\n\n\nrevs=`echo \"$revs\" | tr '\\r' '\\n' | cut -d \":\" -f 1`\nrevs=( $revs )\n\n\n\nrev1=${revs[0]#r}\nrev2=${revs[1]#r}\n\n\"${TM_RUBY:=ruby}\" -I \"$TM_BUNDLE_SUPPORT/\" <<END\n\tif ENV['TM_HG_EXT_DIFF']\n\t\trequire 'hg_extdiff'\n\telse\n\t\trequire 'hg_diff'\n\tend\n\tMercurial::diff_active_file(\"-r$rev2 -r$rev1\", \"Diff Revisions…\")\nEND\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Diff Revisions...",
+  output: "openAsNewDocument",
+  uuid: "A60EB1AE-66C8-4791-940B-6601635A7899"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\nfi\n\n\"${TM_RUBY:=ruby}\" -I \"$TM_BUNDLE_SUPPORT/\" <<END\n\tif ENV['TM_HG_EXT_DIFF']\n\t\trequire 'hg_extdiff'\n\telse\n\t\trequire 'hg_diff'\n\tend\n\tMercurial::diff_active_file(\"-r tip\", \"Diff With Tip\")\nEND\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Diff with Newest (Tip)",
+  output: "openAsNewDocument",
+  uuid: "F56EB32C-F574-4865-83BF-976D8A826FC1"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"\nfi\n\nrevs=$(\"$TM_HG\" log -q \"$TM_FILEPATH\" \\\n\t2> >(CocoaDialog progressbar --indeterminate \\\n\t\t--title \"Diff Revisions…\" \\\n\t\t--text \"Retrieving List of Revisions…\" \\\n\t))\n\nrevs=`osascript<<END\n\tset AppleScript's text item delimiters to {\"\\n\",\"\\r\"}\n\ttell app \"SystemUIServer\"\n\t\tactivate\n\t\tset ourList to (every text item of \"$revs\")\n\t\tif the count of items in ourList is 0 then\n\t\t\tdisplay dialog \"No older revisions of file '$(basename \"$TM_FILEPATH\")' found\" buttons (\"OK\")\n\t\t\tset the result to false\n\t\telse\n\t\t\tchoose from list ourList with prompt \"Diff '$(basename \"$TM_FILEPATH\")' with older revision:\"\n\t\tend if\n\tend tell\nEND`\n\n# exit if user canceled\nif [[ $revs = \"false\" ]]; then\n\tosascript -e 'tell app \"TextMate\" to activate' &>/dev/null &\texit_discard\nfi\n\n\nrevs=`echo \"$revs\" | tr '\\r' '\\n' | cut -d \":\" -f 1`\nrevs=( $revs )\n\n\"${TM_RUBY:=ruby}\" -I \"$TM_BUNDLE_SUPPORT/\" <<END\n\tif ENV['TM_HG_EXT_DIFF']\n\t\trequire 'hg_extdiff'\n\telse\n\t\trequire 'hg_diff'\n\tend\n\tMercurial::diff_active_file(\"-r${revs[0]#r}\", \"Diff With Revision…\")\nEND\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Diff with Revision…",
+  output: "openAsNewDocument",
+  uuid: "7D88D67B-C562-41DB-B25B-0AA8EAF3DC36"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\nfi\n\n\"${TM_RUBY:=ruby}\" -I \"$TM_BUNDLE_SUPPORT/\" <<END\n\tif ENV['TM_HG_EXT_DIFF']\n\t\trequire 'hg_extdiff'\n\telse\n\t\trequire 'hg_diff'\n\tend\n\tMercurial::diff_active_file(\"\", \"Diff With Working Copy\")\nEND",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Diff with Working Copy",
+  output: "openAsNewDocument",
+  uuid: "D8C78EA6-68A7-4625-826A-C64E51EF0724"},
+ {beforeRunningCommand: "nop",
+  command: "\"${TM_RUBY:-ruby}\" \"$TM_BUNDLE_SUPPORT/hg_show_help.rb\"",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Help",
+  output: "showAsHTML",
+  uuid: "296CC34F-72CA-4720-A77D-0452EEB3813C"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed Mercurial, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\ncd \"$TM_PROJECT_DIRECTORY\"\n\n\"${TM_RUBY:-ruby}\" -r \"$TM_SUPPORT_PATH/lib/shelltokenize.rb\" <<END\n\thg = ENV['TM_HG'] || \"hg\"\n\toutput = puts %x{\#{hg} init}\n\tputs output\nEND\n\n# will cause current file to be re-loaded\nrescan_project",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Init",
+  output: "showAsTooltip",
+  uuid: "60838383-D23C-465B-9414-A1EC148F6D1D"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_DIRECTORY\"\nfi\n      \n: ${TM_RUBY:=ruby}\nFORMAT_LOG=\"${TM_BUNDLE_SUPPORT}/format_log.rb\"\nHG_STYLE=\"${TM_BUNDLE_SUPPORT}/map-log.changelog\"\n\nif [[ $TM_HG_LOG_LIMIT != 0 ]]\n\tthen HG_LIMIT=\"-l ${TM_HG_LOG_LIMIT:=10}\"\nfi\n\nHG_STYLE_TMP='\"$HG_STYLE\"'\nTM_HG_TMP='\"$TM_HG\"'\n\nif [[ -z $TM_SELECTED_FILES ]]; then\n   \"$TM_HG\" log $HG_LIMIT --style \"$HG_STYLE\" \"$TM_FILEPATH\" 2>&1 |\"$TM_RUBY\" -- \"$FORMAT_LOG\"\nelse\n   eval \"$TM_HG_TMP\" log $HG_LIMIT --style \"$HG_STYLE_TMP\" \"$TM_SELECTED_FILES\" 2>&1 |\"$TM_RUBY\" -- \"$FORMAT_LOG\"\nfi",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Log",
+  output: "showAsHTML",
+  uuid: "DF26FEB2-2E2C-4764-B766-869113AF6E00"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_DIRECTORY\"\nfi\n      \n: ${TM_RUBY:=ruby}\nFORMAT_LOG=\"${TM_BUNDLE_SUPPORT}/format_log.rb\"\nHG_STYLE=\"${TM_BUNDLE_SUPPORT}/map-log.changelog\"\n\nif [[ $TM_HG_LOG_LIMIT != 0 ]]\n\tthen HG_LIMIT=\"-l ${TM_HG_LOG_LIMIT:=10}\"\nfi\n\nHG_STYLE_TMP='\"$HG_STYLE\"'\nTM_HG_TMP='\"$TM_HG\"'\n\nif [[ -z $TM_SELECTED_FILES ]]; then\n   \"$TM_HG\" log --debug $HG_LIMIT --style \"$HG_STYLE\" \"$TM_FILEPATH\" 2>&1 |\"$TM_RUBY\" -- \"$FORMAT_LOG\"\nelse\n   eval \"$TM_HG_TMP\" log --debug $HG_LIMIT --style \"$HG_STYLE_TMP\" \"$TM_SELECTED_FILES\" 2>&1 |\"$TM_RUBY\" -- \"$FORMAT_LOG\"\nfi",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Log -v",
+  output: "showAsHTML",
+  uuid: "CFC80127-ED10-465E-9CCE-D9282FD7893D"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"\nfi\n\nexport TM_HG\n\ncd \"${TM_PROJECT_DIRECTORY:-$TM_DIRECTORY}\"\n\"${TM_RUBY:-ruby}\" -- \"${TM_BUNDLE_SUPPORT}/hg_pull.rb\"\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Pull from default repo",
+  output: "showAsTooltip",
+  uuid: "46E15B5C-A621-48E5-AD2B-A893532695A6"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"\nfi\n\nexport TM_HG\n\ncd \"${TM_PROJECT_DIRECTORY:-$TM_DIRECTORY}\"\n\"${TM_RUBY:-ruby}\" -- \"${TM_BUNDLE_SUPPORT}/hg_push.rb\"\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Push to default repo",
+  output: "showAsTooltip",
+  uuid: "75575B16-87B9-40A3-9101-B027DD43D31F"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n\"${TM_RUBY:-ruby}\" -r \"$TM_SUPPORT_PATH/lib/shelltokenize.rb\" <<END\n\thg = ENV['TM_HG'] || \"hg\"\n\tputs %x{\#{hg} remove \#{TextMate.selected_paths_for_shell}}\nEND",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Remove",
+  output: "showAsTooltip",
+  uuid: "0210BC81-D701-4836-A188-42D9A79F292B"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -z $TM_SELECTED_FILES ]]; then\n   \"$TM_HG\" revert \"$TM_FILEPATH\"\nelse\n   eval \"$TM_HG\" revert $TM_SELECTED_FILES\nfi\n\n# will cause current file to be re-loaded\nrescan_project\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Revert",
+  output: "showAsTooltip",
+  uuid: "819B19AC-758D-42CB-903F-73A5EDD716BD"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nrevs=$(\"$TM_HG\" log -q \"$TM_FILEPATH\" \\\n\t2> >(CocoaDialog progressbar --indeterminate \\\n\t\t--title \"Revert to Revision…\" \\\n\t\t--text \"Retrieving List of Revisions…\" \\\n\t))\n\nrevs=`osascript<<END\n\tset AppleScript's text item delimiters to {\"\\n\",\"\\r\"}\n\ttell app \"SystemUIServer\"\n\t\tactivate\n\t\tset ourList to (every text item of \"$revs\")\n\t\tif the count of items in ourList is 0 then\n\t\t\tdisplay dialog \"No older revisions of file '$(basename \"$TM_FILEPATH\")' found\" buttons (\"OK\")\n\t\t\tset the result to false\n\t\telse\n\t\t\tchoose from list ourList with prompt \"Revert '$(basename \"$TM_FILEPATH\")' to revision:\"\n\t\tend if\n\tend tell\nEND`\n\n# exit if user canceled\nif [[ $revs = \"false\" ]]; then\n\tosascript -e 'tell app \"TextMate\" to activate' &>/dev/null &\texit_discard\nfi\n\n\nrevs=`echo \"$revs\" | tr '\\r' '\\n' | cut -d \":\" -f 1`\nrevs=( $revs )\n\nif [[ -z $TM_SELECTED_FILES ]]; then\n   \"$TM_HG\" revert -r \"${revs[0]#r}\" \"$TM_FILEPATH\"\nelse\n   eval \"$TM_HG\" revert -r \"${revs[0]#r}\" $TM_SELECTED_FILES\nfi\n\n# will cause current file to be re-loaded\nrescan_project\n\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Revert to Revision...",
+  output: "showAsTooltip",
+  uuid: "59DD3EDA-43DB-4819-8C50-CCBBEED5B0F7"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_DIRECTORY\"\nfi\n\nexport CommitWindow=\"$TM_SUPPORT_PATH/bin/CommitWindow.app/Contents/MacOS/CommitWindow\"\n\n# show it..\n\n\"${TM_RUBY:-ruby}\" -r \"$TM_SUPPORT_PATH/lib/shelltokenize.rb\" <<END\n\thg = ENV['TM_HG'] || \"hg\"\n\tputs %x{\#{hg} status --debug \#{TextMate.selected_paths_for_shell} 2>&1|\"${TM_RUBY:-ruby}\" -KU -- \"${TM_BUNDLE_SUPPORT}/format_status.rb\" \"--status\"}\nEND\n\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Status",
+  output: "showAsHTML",
+  uuid: "ED977BA9-3604-4EC9-999B-39C588CD4801"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n$TM_HG rollback",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Undo",
+  output: "showAsTooltip",
+  uuid: "11743544-9E2A-49BF-BA5D-655EAD6445AA"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"\nfi\n\n\ncd \"${TM_PROJECT_DIRECTORY:-$TM_DIRECTORY}\"\n\"${TM_RUBY:-ruby}\" -- \"${TM_BUNDLE_SUPPORT}/hg_update.rb\"\n\n\n\n# will cause current file to be re-loaded\nrescan_project",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "Update",
+  output: "showAsHTML",
+  uuid: "B797AE83-EABD-4BB7-AD20-0FB24F824343"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_DIRECTORY\";\nfi\n\nrevs=$(\"$TM_HG\" log -q \"$TM_FILEPATH\" \\\n\t2> >(CocoaDialog progressbar --indeterminate \\\n\t\t--title \"View Revision…\" \\\n\t\t--text \"Retrieving List of Revisions…\" \\\n\t))\n\nrevs=`osascript<<END\n\tset AppleScript's text item delimiters to {\"\\n\",\"\\r\"}\n\ttell app \"SystemUIServer\"\n\t\tactivate\n\t\tset ourList to (every text item of \"$revs\")\n\t\tif the count of items in ourList is 0 then\n\t\t\tdisplay dialog \"No older revisions of file '$(basename \"$TM_FILEPATH\")' found\" buttons (\"OK\")\n\t\t\tset the result to false\n\t\telse\n\t\t\tchoose from list ourList with prompt \"View older revision of '$(basename \"$TM_FILEPATH\")':\"\n\t\tend if\n\tend tell\nEND`\n\n# exit if user canceled\nif [[ $revs = \"false\" ]]; then\n\tosascript -e 'tell app \"TextMate\" to activate' &>/dev/null &\texit_discard\nfi\n\nrevs=`echo \"$revs\" | tr '\\r' '\\n' | cut -d \":\" -f 1`\nrevs=( $revs )\n\nFILENAME=\"/tmp/rev${revs[0]}-$TM_FILENAME\"\n\n\"$TM_HG\" cat -r${revs[0]} --output \"$FILENAME\" \"$TM_FILEPATH\"\nopen -a \"TextMate\" \"$FILENAME\"\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "View Revision...",
+  output: "discard",
+  uuid: "83F27190-D52F-414C-8AC8-7ED3ADAF2FC6"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_DIRECTORY\"\nfi\n      \n: ${TM_RUBY:=ruby}\nFORMAT_LOG=\"${TM_BUNDLE_SUPPORT}/format_log.rb\"\nHG_STYLE=\"${TM_BUNDLE_SUPPORT}/map-incoming.changelog\"\n\n\n\"$TM_HG\" incoming -v --style \"$HG_STYLE\" 2>&1 |\"$TM_RUBY\" -- \"$FORMAT_LOG\" \"--in\"\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "incoming",
+  output: "showAsHTML",
+  uuid: "C8F5F526-4ED5-4E75-A0D1-D9B5143B20EE"},
+ {beforeRunningCommand: "nop",
+  command: 
+   "require_cmd \"${TM_HG:=hg}\" \"If you have installed hg, then you need to either update your <tt>PATH</tt> or set the <tt>TM_HG</tt> shell variable (e.g. in Preferences / Advanced)\"\n\n\nif [[ -d \"$TM_PROJECT_DIRECTORY\" ]]\n   then export WorkPath=\"$TM_PROJECT_DIRECTORY\"; cd \"$TM_PROJECT_DIRECTORY\"\n   else export WorkPath=\"$TM_DIRECTORY\"; cd \"$TM_DIRECTORY\"\nfi\n      \n: ${TM_RUBY:=ruby}\nFORMAT_LOG=\"${TM_BUNDLE_SUPPORT}/format_log.rb\"\nHG_STYLE=\"${TM_BUNDLE_SUPPORT}/map-log.changelog\"\n\n\n\"$TM_HG\" outgoing -v --style \"$HG_STYLE\" 2>&1 |\"$TM_RUBY\" -- \"$FORMAT_LOG\" \"--out\"\n",
+  input: "none",
+  keyEquivalent: "^M",
+  name: "outgoing",
+  output: "showAsHTML",
+  uuid: "25A113EB-AA3B-40F0-B30E-ED2C2F9866C0"}]