vagrant 1.0.7 → 2.4.4

data/templates/commands/init/Vagrantfile.erb

@@ -1,99 +1,86 @@
 # -*- mode: ruby -*-
 # vi: set ft=ruby :
 
-Vagrant::Config.run do |config|
-  # All Vagrant configuration is done here. The most common configuration
-  # options are documented and commented below. For a complete reference,
-  # please see the online documentation at vagrantup.com.
+# All Vagrant configuration is done below. The "2" in Vagrant.configure
+# configures the configuration version (we support older styles for
+# backwards compatibility). Please don't change it unless you know what
+# you're doing.
+Vagrant.configure("2") do |config|
+  # The most common configuration options are documented and commented below.
+  # For a complete reference, please see the online documentation at
+  # https://docs.vagrantup.com.
 
-  # Every Vagrant virtual environment requires a box to build off of.
+  # Every Vagrant development environment requires a box. You can search for
+  # boxes at https://vagrantcloud.com/search.
   config.vm.box = "<%= box_name %>"
+  <% if box_version -%>
+  config.vm.box_version = "<%= box_version %>"
+  <% end -%>
 
+  <% if box_url -%>
   # The url from where the 'config.vm.box' box will be fetched if it
   # doesn't already exist on the user's system.
-  <% if box_url.nil? %># <% end %>config.vm.box_url = "<%= box_url || "http://domain.com/path/to/above.box" %>"
+  config.vm.box_url = "<%= box_url %>"
+  <% else -%>
+  # Disable automatic box update checking. If you disable this, then
+  # boxes will only be checked for updates when the user runs
+  # `vagrant box outdated`. This is not recommended.
+  # config.vm.box_check_update = false
+  <% end -%>
 
-  # Boot with a GUI so you can see the screen. (Default is headless)
-  # config.vm.boot_mode = :gui
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine. In the example below,
+  # accessing "localhost:8080" will access port 80 on the guest machine.
+  # NOTE: This will enable public access to the opened port
+  # config.vm.network "forwarded_port", guest: 80, host: 8080
 
-  # Assign this VM to a host-only network IP, allowing you to access it
-  # via the IP. Host-only networks can talk to the host machine as well as
-  # any other machines on the same network, but cannot be accessed (through this
-  # network interface) by any external networks.
-  # config.vm.network :hostonly, "192.168.33.10"
+  # Create a forwarded port mapping which allows access to a specific port
+  # within the machine from a port on the host machine and only allow access
+  # via 127.0.0.1 to disable public access
+  # config.vm.network "forwarded_port", guest: 80, host: 8080, host_ip: "127.0.0.1"
 
-  # Assign this VM to a bridged network, allowing you to connect directly to a
-  # network using the host's network device. This makes the VM appear as another
-  # physical device on your network.
-  # config.vm.network :bridged
+  # Create a private network, which allows host-only access to the machine
+  # using a specific IP.
+  # config.vm.network "private_network", ip: "192.168.33.10"
 
-  # Forward a port from the guest to the host, which allows for outside
-  # computers to access the VM, whereas host only networking does not.
-  # config.vm.forward_port 80, 8080
+  # Create a public network, which generally matched to bridged network.
+  # Bridged networks make the machine appear as another physical device on
+  # your network.
+  # config.vm.network "public_network"
 
   # Share an additional folder to the guest VM. The first argument is
-  # an identifier, the second is the path on the guest to mount the
-  # folder, and the third is the path on the host to the actual folder.
-  # config.vm.share_folder "v-data", "/vagrant_data", "../data"
+  # the path on the host to the actual folder. The second argument is
+  # the path on the guest to mount the folder. And the optional third
+  # argument is a set of non-required options.
+  # config.vm.synced_folder "../data", "/vagrant_data"
 
-  # Enable provisioning with Puppet stand alone.  Puppet manifests
-  # are contained in a directory path relative to this Vagrantfile.
-  # You will need to create the manifests directory and a manifest in
-  # the file <%= box_name %>.pp in the manifests_path directory.
-  #
-  # An example Puppet manifest to provision the message of the day:
-  #
-  # # group { "puppet":
-  # #   ensure => "present",
-  # # }
-  # #
-  # # File { owner => 0, group => 0, mode => 0644 }
-  # #
-  # # file { '/etc/motd':
-  # #   content => "Welcome to your Vagrant-built virtual machine!
-  # #               Managed by Puppet.\n"
-  # # }
-  #
-  # config.vm.provision :puppet do |puppet|
-  #   puppet.manifests_path = "manifests"
-  #   puppet.manifest_file  = "<%= box_name %>.pp"
-  # end
-
-  # Enable provisioning with chef solo, specifying a cookbooks path, roles
-  # path, and data_bags path (all relative to this Vagrantfile), and adding 
-  # some recipes and/or roles.
-  #
-  # config.vm.provision :chef_solo do |chef|
-  #   chef.cookbooks_path = "../my-recipes/cookbooks"
-  #   chef.roles_path = "../my-recipes/roles"
-  #   chef.data_bags_path = "../my-recipes/data_bags"
-  #   chef.add_recipe "mysql"
-  #   chef.add_role "web"
-  #
-  #   # You may also specify custom JSON attributes:
-  #   chef.json = { :mysql_password => "foo" }
-  # end
+  # Disable the default share of the current code directory. Doing this
+  # provides improved isolation between the vagrant box and your host
+  # by making sure your Vagrantfile isn't accessible to the vagrant box.
+  # If you use this you may want to enable additional shared subfolders as
+  # shown above.
+  # config.vm.synced_folder ".", "/vagrant", disabled: true
 
-  # Enable provisioning with chef server, specifying the chef server URL,
-  # and the path to the validation key (relative to this Vagrantfile).
-  #
-  # The Opscode Platform uses HTTPS. Substitute your organization for
-  # ORGNAME in the URL and validation key.
+  # Provider-specific configuration so you can fine-tune various
+  # backing providers for Vagrant. These expose provider-specific options.
+  # Example for VirtualBox:
   #
-  # If you have your own Chef Server, use the appropriate URL, which may be
-  # HTTP instead of HTTPS depending on your configuration. Also change the
-  # validation key to validation.pem.
+  # config.vm.provider "virtualbox" do |vb|
+  #   # Display the VirtualBox GUI when booting the machine
+  #   vb.gui = true
   #
-  # config.vm.provision :chef_client do |chef|
-  #   chef.chef_server_url = "https://api.opscode.com/organizations/ORGNAME"
-  #   chef.validation_key_path = "ORGNAME-validator.pem"
+  #   # Customize the amount of memory on the VM:
+  #   vb.memory = "1024"
   # end
   #
-  # If you're using the Opscode platform, your validator client is
-  # ORGNAME-validator, replacing ORGNAME with your organization name.
-  #
-  # IF you have your own Chef Server, the default validation client name is
-  # chef-validator, unless you changed the configuration.
-  #
-  #   chef.validation_client_name = "ORGNAME-validator"
+  # View the documentation for the provider you are using for more
+  # information on available options.
+
+  # Enable provisioning with a shell script. Additional provisioners such as
+  # Ansible, Chef, Docker, Puppet and Salt are also available. Please see the
+  # documentation for more information about their specific syntax and use.
+  # config.vm.provision "shell", inline: <<-SHELL
+  #   apt-get update
+  #   apt-get install -y apache2
+  # SHELL
 end

data/templates/commands/init/Vagrantfile.min.erb

@@ -0,0 +1,12 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+Vagrant.configure("2") do |config|
+  config.vm.box = "<%= box_name %>"
+  <% if box_version -%>
+  config.vm.box_version = "<%= box_version %>"
+  <% end -%>
+  <% if box_url -%>
+  config.vm.box_url = "<%= box_url %>"
+  <% end -%>
+end

data/templates/commands/ssh_config/config.erb

@@ -1,15 +1,42 @@
 Host <%= host_key %>
+<% if config -%>
+  Include <%= config %>
+<% end -%>
   HostName <%= ssh_host %>
   User <%= ssh_user %>
   Port <%= ssh_port %>
+<% if ! verify_host_key || verify_host_key == :never -%>
   UserKnownHostsFile /dev/null
   StrictHostKeyChecking no
+<% end -%>
   PasswordAuthentication no
-  IdentityFile "<%= private_key_path %>"
+<% if private_key_path -%>
+<% private_key_path.each do |path| %>
+<% if path.include?(" ") -%>
+  IdentityFile "<%= path %>"
+<% else -%>
+  IdentityFile <%= path %>
+<% end -%>
+<% end -%>
+<% end -%>
+<% if keys_only -%>
   IdentitiesOnly yes
+<% end -%>
+<% if log_level -%>
+  LogLevel <%= log_level %>
+<% else -%>
+  LogLevel FATAL
+<% end -%>
 <% if forward_agent -%>
   ForwardAgent yes
 <% end -%>
 <% if forward_x11 -%>
   ForwardX11 yes
 <% end -%>
+<% if proxy_command -%>
+  ProxyCommand <%= proxy_command %>
+<% end -%>
+<% if !disable_deprecated_algorithms -%>
+  PubkeyAcceptedKeyTypes +ssh-rsa
+  HostKeyAlgorithms +ssh-rsa
+<% end -%>

data/templates/commands/winrm_config/config.erb

@@ -0,0 +1,11 @@
+Host <%= host_key %>
+  HostName <%= winrm_host %>
+  User <%= winrm_user %>
+  Password <%= winrm_password %>
+  Port <%= winrm_port %>
+  <% if rdp_port -%>
+  RDPHostName <%= rdp_host %>
+  RDPPort <%= rdp_port %>
+  RDPUser <%= rdp_user %>
+  RDPPassword <%= rdp_pass %>
+  <% end -%>

data/templates/config/messages.erb

@@ -0,0 +1,14 @@
+<% if !warnings.empty? -%>
+Warnings:
+<% warnings.each do |warning| -%>
+* <%= warning %>
+<% end -%>
+
+<% end -%>
+<% if !errors.empty? -%>
+Errors:
+<% errors.each do |error| -%>
+* <%= error %>
+<% end -%>
+
+<% end -%>

data/templates/config/validation_failed.erb

@@ -1,6 +1,6 @@
-<% errors.each do |key, container| -%>
-<%= key %>:
-<% container.errors.each do |error| -%>
+<% errors.each do |section, list| -%>
+<%= section %>:
+<% list.each do |error| -%>
 * <%= error %>
 <% end -%>
 

data/templates/guests/alpine/network_dhcp.erb

@@ -0,0 +1,13 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+auto eth<%= options[:interface] %>
+iface eth<%= options[:interface] %> inet dhcp
+<% if !options[:use_dhcp_assigned_default_route] %>
+    post-up route del default dev $IFACE || true
+<% else %>
+    # We need to disable eth0, see GH-2648
+    post-up route del default dev eth0
+
+    pre-down route add default dev eth0
+<% end %>
+#VAGRANT-END

data/templates/guests/alpine/network_static.erb

@@ -0,0 +1,7 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+auto eth<%= options[:interface] %>
+iface eth<%= options[:interface] %> inet static
+      address <%= options[:ip] %>
+      netmask <%= options[:netmask] %>
+#VAGRANT-END

data/templates/guests/alt/network_dhcp.erb

@@ -0,0 +1,7 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+TYPE=eth
+NM_CONTROLLED=<%= options.fetch(:nm_controlled, "no") %>
+BOOTPROTO=dhcp
+ONBOOT=yes
+#VAGRANT-END

data/templates/guests/alt/network_ipv4address.erb

@@ -0,0 +1,3 @@
+#VAGRANT-BEGIN
+<%= options[:ip] %>/<%= options[:netmask] %>
+#VAGRANT-END

data/templates/guests/alt/network_ipv4route.erb

@@ -0,0 +1,5 @@
+#VAGRANT-BEGIN
+<% if options[:gateway] %>
+default via <%= options[:gateway] %>
+<% end %>
+#VAGRANT-END

data/templates/guests/alt/network_static.erb

@@ -0,0 +1,7 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+TYPE=eth
+NM_CONTROLLED=<%= options.fetch(:nm_controlled, "no") %>
+BOOTPROTO=static
+ONBOOT=yes
+#VAGRANT-END

data/templates/guests/arch/default_network/network_dhcp.erb

@@ -0,0 +1,4 @@
+Description='A basic dhcp ethernet connection'
+Interface=<%= options[:device] %>
+Connection=ethernet
+IP=dhcp

data/templates/guests/arch/default_network/network_static.erb

@@ -0,0 +1,8 @@
+Connection=ethernet
+Description='A basic static ethernet connection'
+Interface=<%= options[:device] %>
+IP=static
+Address=('<%= options[:ip]%>/<%= options[:netmask] %>')
+<% if options[:gateway] -%>
+Gateway='<%= options[:gateway] %>'
+<% end -%>

data/templates/guests/arch/default_network/network_static6.erb

@@ -0,0 +1,8 @@
+Connection=ethernet
+Description='A basic IPv6 ethernet connection'
+Interface=<%= options[:device] %>
+IP6=static
+Address6=('<%= options[:ip]%>/<%= options[:netmask] %>')
+<% if options[:gateway] -%>
+Gateway6='<%= options[:gateway] %>'
+<% end -%>

data/templates/guests/arch/systemd_networkd/network_dhcp.erb

@@ -0,0 +1,6 @@
+[Match]
+Name=<%= options[:device] %>
+
+[Network]
+Description=A basic DHCP ethernet connection
+DHCP=ipv4

data/templates/guests/arch/systemd_networkd/network_static.erb

@@ -0,0 +1,9 @@
+[Match]
+Name=<%= options[:device] %>
+
+[Network]
+Description=A basic static ethernet connection
+Address=<%= options[:ip]%>/<%= options[:netmask] %>
+<% if options[:gateway] -%>
+Gateway=<%= options[:gateway] %>
+<% end -%>

data/templates/guests/arch/systemd_networkd/network_static6.erb

@@ -0,0 +1,9 @@
+[Match]
+Name=<%= options[:device] %>
+
+[Network]
+Description=A basic static ethernet connection
+Address=<%= options[:ip]%>/<%= options[:netmask] %>
+<% if options[:gateway] -%>
+Gateway=<%= options[:gateway] %>
+<% end -%>

data/templates/guests/coreos/etcd.service.erb

@@ -0,0 +1,10 @@
+[Unit]
+Description=Clustered etcd
+#After=docker.service
+
+[Service]
+Restart=always
+ExecStart=/usr/bin/etcd -c 4001 -s 7001 -h <%= options[:my_ip] %> <% if options[:connection_string] %>-C <%= options[:connection_string] %><% end %> -d /home/core/etcd
+
+[Install]
+WantedBy=local.target

data/templates/guests/debian/network_dhcp.erb

@@ -1,6 +1,13 @@
 #VAGRANT-BEGIN
 # The contents below are automatically generated by Vagrant. Do not modify.
-auto eth<%= options[:interface] %>
-iface eth<%= options[:interface] %> inet dhcp
-    post-up route del default dev $IFACE
+auto <%= options[:device] %>
+iface <%= options[:device] %> inet dhcp
+<% if !options[:use_dhcp_assigned_default_route] %>
+    post-up ip route del default dev $IFACE || true
+<% else %>
+    # We need to disable eth0, see GH-2648
+    post-up ip route del default dev <%= options[:root_device] %> || true
+    post-up dhclient $IFACE
+    pre-down ip route add default dev <%= options[:root_device] %>
+<% end %>
 #VAGRANT-END

data/templates/guests/debian/network_static.erb

@@ -1,7 +1,10 @@
 #VAGRANT-BEGIN
 # The contents below are automatically generated by Vagrant. Do not modify.
-auto eth<%= options[:interface] %>
-iface eth<%= options[:interface] %> inet static
+auto <%= options[:device] %>
+iface <%= options[:device] %> inet static
       address <%= options[:ip] %>
       netmask <%= options[:netmask] %>
+<% if options[:gateway] %>
+      gateway <%= options[:gateway] %>
+<% end %>
 #VAGRANT-END

data/templates/guests/debian/network_static6.erb

@@ -0,0 +1,10 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+auto <%= options[:device] %>
+iface <%= options[:device] %> inet6 static
+      address <%= options[:ip] %>
+      netmask <%= options[:netmask] %>
+<% if options[:gateway] %>
+      gateway <%= options[:gateway] %>
+<% end %>
+#VAGRANT-END

data/templates/guests/freebsd/network_dhcp.erb

@@ -1,3 +1,4 @@
 #VAGRANT-BEGIN
-ifconfig_em<%= options[:interface] %>="DHCP"
+ifconfig_<%= options[:device] %>="DHCP"
+synchronous_dhclient="YES"
 #VAGRANT-END

data/templates/guests/freebsd/network_static.erb

@@ -1,3 +1,6 @@
 #VAGRANT-BEGIN
-ifconfig_em<%= options[:interface] %>="inet <%= options[:ip] %> netmask <%= options[:netmask] %>"
+ifconfig_<%= options[:device] %>="inet <%= options[:ip] %> netmask <%= options[:netmask] %>"
+<% if options[:gateway] %>
+defaultrouter="<%= options[:gateway] %>"
+<% end %>
 #VAGRANT-END

data/templates/guests/freebsd/network_static6.erb

@@ -0,0 +1,6 @@
+#VAGRANT-BEGIN
+ifconfig_<%= options[:device] %>_ipv6="inet6 <%= options[:ip] %> prefixlen <%= options[:netmask] %>"
+<% if options[:gateway] %>
+ipv6_defaultrouter="<%= options[:gateway] %>"
+<% end %>
+#VAGRANT-END

data/templates/guests/funtoo/network_dhcp.erb

@@ -0,0 +1,4 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+template='dhcp'
+#VAGRANT-END

data/templates/guests/funtoo/network_static.erb

@@ -0,0 +1,10 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+template='interface'
+ipaddr='<%= options[:ip] %>/<%= options[:netmask] %>'
+<% [:gateway, :nameservers, :domain, :route, :gateway6, :route6, :mtu].each do |key| %>
+<% if options[key] %>
+<%= key %>='<%= options[key] %>'
+<% end %>
+<% end %>
+#VAGRANT-END

data/templates/guests/funtoo/network_static6.erb

@@ -0,0 +1,9 @@
+#VAGRANT-BEGIN
+template='interface'
+ipaddr='<%= options[:ip] %>/<%= options[:netmask] %>'
+<% [:gateway, :nameservers, :domain, :route, :gateway6, :route6, :mtu].each do |key| %>
+<% if options[key] %>
+<%= key %>='<%= options[key] %>'
+<% end %>
+<% end %>
+#VAGRANT-END

data/templates/guests/gentoo/network_dhcp.erb

@@ -1,4 +1,4 @@
 #VAGRANT-BEGIN
 # The contents below are automatically generated by Vagrant. Do not modify.
-config_eth<%= options[:interface] %>="dhcp"
+config_<%= options[:device] %>="dhcp"
 #VAGRANT-END

data/templates/guests/gentoo/network_static.erb

@@ -1,4 +1,8 @@
 #VAGRANT-BEGIN
 # The contents below are automatically generated by Vagrant. Do not modify.
-config_eth<%= options[:interface] %>=("<%= options[:ip] %> netmask <%= options[:netmask] %>")
+config_<%= options[:device] %>=("<%= options[:ip] %> netmask <%= options[:netmask] %>")
+modules_<%= options[:device] %>=("!plug")
+<% if options[:gateway] -%>
+gateways_<%= options[:device] %>="<%= options[:gateway] %>"
+<% end -%>
 #VAGRANT-END

data/templates/guests/gentoo/network_static6.erb

@@ -0,0 +1,8 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+config_<%= options[:device] %>="<%= options[:ip] %>/<%= options[:netmask] %>"
+modules_<%= options[:device] %>="!plug"
+<% if options[:gateway] -%>
+gateways_<%= options[:device] %>="<%= options[:gateway] %>"
+<% end -%>
+#VAGRANT-END

data/templates/guests/gentoo/network_systemd.erb

@@ -0,0 +1,16 @@
+[Match]
+Name=<%= networks[0][:device] %>
+
+[Network]
+<%- gateway = nil %>
+<%- networks.each do |net| %>
+<%-   if net[:type] == 'dhcp' %>
+DHCP=yes
+<%-   elsif net[:ip] %>
+Address=<%= net[:ip] %>/<%= net[:netmask] %>
+<%-   end %>
+<%-   gateway ||= net[:gateway] %>
+<%- end %>
+<%- if gateway %>
+Gateway=<%= gateway %>
+<%- end %>

data/templates/guests/linux/etc_fstab.erb

@@ -0,0 +1,6 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+<% folders.each do |opts| %>
+<%= opts[:name] %> <%= opts[:mount_point] %> <%= opts[:mount_type] %> <%= opts[:mount_options] || 'default' %> <%= opts[:dump] || 0 %> <%= opts[:fsck] || 0 %>
+<%end%>
+#VAGRANT-END

data/templates/guests/netbsd/network_dhcp.erb

@@ -0,0 +1,3 @@
+#VAGRANT-BEGIN
+ifconfig_wm<%= options[:interface] %>=dhcp
+#VAGRANT-END

data/templates/guests/netbsd/network_static.erb

@@ -0,0 +1,3 @@
+#VAGRANT-BEGIN
+ifconfig_wm<%= options[:interface] %>="media autoselect up;inet <%= options[:ip] %> netmask <%= options[:netmask] %>"
+#VAGRANT-END

data/templates/guests/nixos/hostname.erb

@@ -0,0 +1,6 @@
+{ config, pkgs, ... }:
+{
+  <% if name %>
+  networking.hostName = "<%= name %>";
+  <% end %>
+}

data/templates/guests/nixos/network.erb

@@ -0,0 +1,15 @@
+{ config, pkgs, ... }:
+{
+  networking.interfaces = {
+    <% networks.select {|n| n[:device]}.each do |network| %>
+    <%= network[:device] %>.ipv4.addresses = [{
+      <% if network[:type] == :static %>
+      address = "<%= network[:ip] %>";
+      <% end %>
+      <% if network[:prefix_length] %>
+      prefixLength = <%= network[:prefix_length] %>;
+      <% end %>
+    }];
+    <% end %>
+  };
+}

data/templates/guests/openbsd/network_dhcp.erb

@@ -0,0 +1 @@
+dhcp

data/templates/guests/openbsd/network_static.erb

@@ -0,0 +1 @@
+inet <%= options[:ip] %> <%= options[:netmask] %> NONE

data/templates/guests/openbsd/network_static6.erb

@@ -0,0 +1 @@
+inet6  <%= options[:ip] %> <%= options[:netmask] %> NONE

data/templates/guests/redhat/network_dhcp.erb

@@ -2,5 +2,6 @@
 # The contents below are automatically generated by Vagrant. Do not modify.
 BOOTPROTO=dhcp
 ONBOOT=yes
-DEVICE=eth<%= options[:interface] %>
+DEVICE=<%= options[:device] %>
+NM_CONTROLLED=<%= options.fetch(:nm_controlled, "no") %>
 #VAGRANT-END

data/templates/guests/redhat/network_static.erb

@@ -1,7 +1,16 @@
 #VAGRANT-BEGIN
 # The contents below are automatically generated by Vagrant. Do not modify.
-BOOTPROTO=static
+NM_CONTROLLED=<%= options.fetch(:nm_controlled, "no") %>
+BOOTPROTO=none
+ONBOOT=yes
 IPADDR=<%= options[:ip] %>
 NETMASK=<%= options[:netmask] %>
-DEVICE=eth<%= options[:interface] %>
+DEVICE=<%= options[:device] %>
+<% if options[:gateway] %>
+GATEWAY=<%= options[:gateway] %>
+<% end %>
+<% if options[:mac_address] %>
+HWADDR=<%= options[:mac_address] %>
+<% end %>
+PEERDNS=no
 #VAGRANT-END

data/templates/guests/redhat/network_static6.erb

@@ -0,0 +1,12 @@
+#VAGRANT-BEGIN
+# The contents below are automatically generated by Vagrant. Do not modify.
+NM_CONTROLLED=<%= options.fetch(:nm_controlled, "no") %>
+BOOTPROTO=static
+ONBOOT=yes
+DEVICE=<%= options[:device] %>
+IPV6INIT=yes
+IPV6ADDR=<%= options[:ip] %>/<%= options[:netmask] %>
+<% if options[:gateway] -%>
+IPV6_DEFAULTGW=<%= options[:gateway] %>
+<% end %>
+#VAGRANT-END

data/templates/guests/slackware/network_dhcp.erb

@@ -0,0 +1,11 @@
+#VAGRANT-BEGIN
+# Config for eth<%= i %>
+USE_DHCP[<%= i %>]="yes"
+DHCP_HOSTNAME[<%= i %>]=""
+
+<% if options[:gateway] -%>
+GATEWAY="<%= options[:gateway] %>"
+<% end -%>
+
+DEBUG_ETH_UP="no"
+#VAGRANT-END