vagrant-tiktalik 0.0.3 → 0.0.4

data/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/compat.h

@@ -1,83 +0,0 @@
-/*
- * Copyright (c) 2008, 2009, Wayne Meissner
- *
- * Copyright (c) 2008-2013, Ruby FFI project contributors
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the Ruby FFI project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef RBFFI_COMPAT_H
-#define RBFFI_COMPAT_H
-
-#include <ruby.h>
-
-#ifndef RARRAY_LEN
-#  define RARRAY_LEN(ary) RARRAY(ary)->len
-#endif
-
-#ifndef RARRAY_PTR
-#  define RARRAY_PTR(ary) RARRAY(ary)->ptr
-#endif
-
-#ifndef RSTRING_LEN
-#  define RSTRING_LEN(s) RSTRING(s)->len
-#endif
-
-#ifndef RSTRING_PTR
-#  define RSTRING_PTR(s) RSTRING(s)->ptr
-#endif
-
-#ifndef NUM2ULL
-#  define NUM2ULL(x) rb_num2ull((VALUE)x)
-#endif
-
-#ifndef roundup
-#  define roundup(x, y)   ((((x)+((y)-1))/(y))*(y))
-#endif
-
-#ifdef __GNUC__
-#  define likely(x) __builtin_expect((x), 1)
-#  define unlikely(x) __builtin_expect((x), 0)
-#else
-#  define likely(x) (x)
-#  define unlikely(x) (x)
-#endif
-
-#ifndef MAX
-#  define MAX(a, b) ((a) < (b) ? (b) : (a))
-#endif
-#ifndef MIN
-#  define MIN(a, b) ((a) < (b) ? (a) : (b))
-#endif
-
-#ifndef RB_GC_GUARD
-#  define RB_GC_GUARD(x) (x)
-#endif
-
-#ifndef RB_GC_GUARD_PTR
-#  define RB_GC_GUARD_PTR(x) (x)
-#endif
-
-#endif /* RBFFI_COMPAT_H */
-

data/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/extconf.h

@@ -1,8 +0,0 @@
-#ifndef EXTCONF_H
-#define EXTCONF_H
-#define HAVE_RB_THREAD_BLOCKING_REGION 1
-#define HAVE_RB_THREAD_CALL_WITH_GVL 1
-#define HAVE_RB_THREAD_CALL_WITHOUT_GVL 1
-#define USE_INTERNAL_LIBFFI 1
-#define RUBY_1_9 1
-#endif

data/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/extconf.rb

@@ -1,64 +0,0 @@
-#!/usr/bin/env ruby
-
-if !defined?(RUBY_ENGINE) || RUBY_ENGINE == 'ruby' || RUBY_ENGINE == 'rbx'
-  require 'mkmf'
-  require 'rbconfig'
-  dir_config("ffi_c")
-
-  # recent versions of ruby add restrictive ansi and warning flags on a whim - kill them all
-  $warnflags = ''
-  $CFLAGS.gsub!(/[\s+]-ansi/, '')
-  $CFLAGS.gsub!(/[\s+]-std=[^\s]+/, '')
-  # solaris needs -c99 for <stdbool.h>
-  $CFLAGS << " -std=c99" if RbConfig::CONFIG['host_os'] =~ /solaris/
-  
-  if ENV['RUBY_CC_VERSION'].nil? && (pkg_config("libffi") ||
-     have_header("ffi.h") ||
-     find_header("ffi.h", "/usr/local/include", "/usr/include/ffi"))
-
-    # We need at least ffi_call and ffi_prep_closure
-    libffi_ok = have_library("ffi", "ffi_call", [ "ffi.h" ]) ||
-                have_library("libffi", "ffi_call", [ "ffi.h" ])
-    libffi_ok &&= have_func("ffi_prep_closure")
-
-    # Check if the raw api is available.
-    $defs << "-DHAVE_RAW_API" if have_func("ffi_raw_call") && have_func("ffi_prep_raw_closure")
-  end
-  
-  have_func('rb_thread_blocking_region')
-  have_func('rb_thread_call_with_gvl')
-  have_func('rb_thread_call_without_gvl')
-  have_func('ffi_prep_cif_var')
-  
-  $defs << "-DHAVE_EXTCONF_H" if $defs.empty? # needed so create_header works
-  $defs << "-DUSE_INTERNAL_LIBFFI" unless libffi_ok
-  $defs << "-DRUBY_1_9" if RUBY_VERSION >= "1.9.0"
-
-  create_header
-  
-  $LOCAL_LIBS << " ./libffi/.libs/libffi_convenience.lib" if RbConfig::CONFIG['host_os'] =~ /mswin/
-
-  create_makefile("ffi_c")
-  unless libffi_ok
-    File.open("Makefile", "a") do |mf|
-      mf.puts "LIBFFI_HOST=--host=#{RbConfig::CONFIG['host_alias']}" if RbConfig::CONFIG.has_key?("host_alias")
-      if RbConfig::CONFIG['host_os'].downcase =~ /darwin/
-        mf.puts "include ${srcdir}/libffi.darwin.mk"
-      elsif RbConfig::CONFIG['host_os'].downcase =~ /bsd/
-        mf.puts '.include "${srcdir}/libffi.bsd.mk"'
-      elsif RbConfig::CONFIG['host_os'].downcase =~ /mswin64/
-        mf.puts '!include $(srcdir)/libffi.vc64.mk'
-      elsif RbConfig::CONFIG['host_os'].downcase =~ /mswin32/
-        mf.puts '!include $(srcdir)/libffi.vc.mk'
-      else
-        mf.puts "include ${srcdir}/libffi.mk"
-      end
-    end
-  end
-  
-else
-  File.open("Makefile", "w") do |mf|
-    mf.puts "# Dummy makefile for non-mri rubies"
-    mf.puts "all install::\n"
-  end
-end

data/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/ffi.c

@@ -1,98 +0,0 @@
-/*
- * Copyright (c) 2008, 2009, Wayne Meissner
- * Copyright (C) 2009 Luc Heinrich <luc@honk-honk.com>
- *
- * Copyright (c) 2008-2013, Ruby FFI project contributors
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the Ruby FFI project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <ruby.h>
-
-#include <ffi.h>
-
-#include "rbffi.h"
-#include "AbstractMemory.h"
-#include "Pointer.h"
-#include "MemoryPointer.h"
-#include "Struct.h"
-#include "StructByValue.h"
-#include "StructByReference.h"
-#include "DynamicLibrary.h"
-#include "Platform.h"
-#include "Types.h"
-#include "LastError.h"
-#include "Function.h"
-#include "ClosurePool.h"
-#include "MethodHandle.h"
-#include "Call.h"
-#include "ArrayType.h"
-#include "MappedType.h"
-
-void Init_ffi_c(void);
-
-VALUE rbffi_FFIModule = Qnil;
-
-static VALUE moduleFFI = Qnil;
-
-void
-Init_ffi_c(void) 
-{
-    /* 
-     * Document-module: FFI
-     *
-     * This module embbed type constants from {FFI::NativeType}.
-     */
-    rbffi_FFIModule = moduleFFI = rb_define_module("FFI");
-    rb_global_variable(&rbffi_FFIModule);
-
-    rbffi_Thread_Init(rbffi_FFIModule);
-    
-    /* FFI::Type needs to be initialized before most other classes */
-    rbffi_Type_Init(moduleFFI);
-
-    rbffi_DataConverter_Init(moduleFFI);
-
-    rbffi_ArrayType_Init(moduleFFI);
-    rbffi_LastError_Init(moduleFFI);
-    rbffi_Call_Init(moduleFFI);
-    rbffi_ClosurePool_Init(moduleFFI);
-    rbffi_MethodHandle_Init(moduleFFI);
-    rbffi_Platform_Init(moduleFFI);
-    rbffi_AbstractMemory_Init(moduleFFI);
-    rbffi_Pointer_Init(moduleFFI);
-    rbffi_Function_Init(moduleFFI);
-    rbffi_MemoryPointer_Init(moduleFFI);
-    rbffi_Buffer_Init(moduleFFI);
-    rbffi_StructByValue_Init(moduleFFI);
-    rbffi_StructByReference_Init(moduleFFI);
-    rbffi_Struct_Init(moduleFFI);
-    rbffi_DynamicLibrary_Init(moduleFFI);
-    rbffi_Variadic_Init(moduleFFI);
-    rbffi_Types_Init(moduleFFI);
-    rbffi_MappedType_Init(moduleFFI);
-}
-

data/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi-x86_64-linux/Makefile

@@ -1,1820 +0,0 @@
-# Makefile.in generated by automake 1.11.1 from Makefile.am.
-# Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-
-VPATH = /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi
-pkgdatadir = $(datadir)/libffi
-pkgincludedir = $(includedir)/libffi
-pkglibdir = $(libdir)/libffi
-pkglibexecdir = $(libexecdir)/libffi
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-target_triplet = x86_64-unknown-linux-gnu
-#am__append_1 = src/mips/ffi.c src/mips/o32.S src/mips/n32.S
-#am__append_2 = src/x86/ffi.c src/x86/sysv.S
-#am__append_3 = src/x86/ffi.c src/x86/freebsd.S
-#am__append_4 = src/x86/ffi.c src/x86/win32.S
-#am__append_5 = src/x86/ffi.c src/x86/win64.S
-#am__append_6 = src/x86/ffi.c src/x86/darwin.S src/x86/ffi64.c src/x86/darwin64.S
-#am__append_7 = src/sparc/ffi.c src/sparc/v8.S src/sparc/v9.S
-#am__append_8 = src/alpha/ffi.c src/alpha/osf.S
-#am__append_9 = src/ia64/ffi.c src/ia64/unix.S
-#am__append_10 = src/m32r/sysv.S src/m32r/ffi.c
-#am__append_11 = src/m68k/ffi.c src/m68k/sysv.S
-#am__append_12 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S src/powerpc/linux64.S src/powerpc/linux64_closure.S
-#am__append_13 = src/powerpc/ffi_darwin.c src/powerpc/aix.S src/powerpc/aix_closure.S
-#am__append_14 = src/powerpc/ffi_darwin.c src/powerpc/darwin.S src/powerpc/darwin_closure.S
-#am__append_15 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S
-#am__append_16 = src/arm/sysv.S src/arm/ffi.c
-##am__append_17 = src/arm/trampoline.S
-#am__append_18 = src/avr32/sysv.S src/avr32/ffi.c
-#am__append_19 = src/cris/sysv.S src/cris/ffi.c
-#am__append_20 = src/frv/eabi.S src/frv/ffi.c
-#am__append_21 = src/s390/sysv.S src/s390/ffi.c
-am__append_22 = src/x86/ffi64.c src/x86/unix64.S src/x86/ffi.c src/x86/sysv.S
-#am__append_23 = src/sh/sysv.S src/sh/ffi.c
-#am__append_24 = src/sh64/sysv.S src/sh64/ffi.c
-#am__append_25 = src/pa/linux.S src/pa/ffi.c
-#am__append_26 = src/pa/hpux32.S src/pa/ffi.c
-# Build debug. Define FFI_DEBUG on the commandline so that, when building with
-# MSVC, it can link against the debug CRT.
-#am__append_27 = -DFFI_DEBUG
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/doc/stamp-vti \
-	$(srcdir)/doc/version.texi $(srcdir)/fficonfig.h.in \
-	$(srcdir)/libffi.pc.in $(top_srcdir)/configure ChangeLog \
-	compile config.guess config.sub depcomp install-sh ltmain.sh \
-	mdate-sh missing texinfo.tex
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/ax_cc_maxopt.m4 \
-	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
-	$(top_srcdir)/m4/ax_check_compiler_flags.m4 \
-	$(top_srcdir)/m4/ax_compiler_vendor.m4 \
-	$(top_srcdir)/m4/ax_configure_args.m4 \
-	$(top_srcdir)/m4/ax_enable_builddir.m4 \
-	$(top_srcdir)/m4/ax_gcc_archflag.m4 \
-	$(top_srcdir)/m4/ax_gcc_x86_cpuid.m4 \
-	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
-	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
-	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = fficonfig.h
-CONFIG_CLEAN_FILES = libffi.pc
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(infodir)" \
-	"$(DESTDIR)$(pkgconfigdir)"
-LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
-libffi_la_LIBADD =
-am__dirstamp = $(am__leading_dot)dirstamp
-am_libffi_la_OBJECTS = src/debug.lo src/prep_cif.lo src/types.lo \
-	src/raw_api.lo src/java_raw_api.lo src/closures.lo
-#am__objects_1 = src/mips/ffi.lo src/mips/o32.lo \
-#	src/mips/n32.lo
-#am__objects_2 = src/x86/ffi.lo src/x86/sysv.lo
-#am__objects_3 = src/x86/ffi.lo src/x86/freebsd.lo
-#am__objects_4 = src/x86/ffi.lo src/x86/win32.lo
-#am__objects_5 = src/x86/ffi.lo src/x86/win64.lo
-#am__objects_6 = src/x86/ffi.lo src/x86/darwin.lo \
-#	src/x86/ffi64.lo src/x86/darwin64.lo
-#am__objects_7 = src/sparc/ffi.lo src/sparc/v8.lo \
-#	src/sparc/v9.lo
-#am__objects_8 = src/alpha/ffi.lo src/alpha/osf.lo
-#am__objects_9 = src/ia64/ffi.lo src/ia64/unix.lo
-#am__objects_10 = src/m32r/sysv.lo src/m32r/ffi.lo
-#am__objects_11 = src/m68k/ffi.lo src/m68k/sysv.lo
-#am__objects_12 = src/powerpc/ffi.lo src/powerpc/sysv.lo \
-#	src/powerpc/ppc_closure.lo \
-#	src/powerpc/linux64.lo \
-#	src/powerpc/linux64_closure.lo
-#am__objects_13 = src/powerpc/ffi_darwin.lo \
-#	src/powerpc/aix.lo \
-#	src/powerpc/aix_closure.lo
-#am__objects_14 = src/powerpc/ffi_darwin.lo \
-#	src/powerpc/darwin.lo \
-#	src/powerpc/darwin_closure.lo
-#am__objects_15 = src/powerpc/ffi.lo \
-#	src/powerpc/sysv.lo \
-#	src/powerpc/ppc_closure.lo
-#am__objects_16 = src/arm/sysv.lo src/arm/ffi.lo
-##am__objects_17 = src/arm/trampoline.lo
-#am__objects_18 = src/avr32/sysv.lo src/avr32/ffi.lo
-#am__objects_19 = src/cris/sysv.lo src/cris/ffi.lo
-#am__objects_20 = src/frv/eabi.lo src/frv/ffi.lo
-#am__objects_21 = src/s390/sysv.lo src/s390/ffi.lo
-am__objects_22 = src/x86/ffi64.lo src/x86/unix64.lo \
-	src/x86/ffi.lo src/x86/sysv.lo
-#am__objects_23 = src/sh/sysv.lo src/sh/ffi.lo
-#am__objects_24 = src/sh64/sysv.lo src/sh64/ffi.lo
-#am__objects_25 = src/pa/linux.lo src/pa/ffi.lo
-#am__objects_26 = src/pa/hpux32.lo src/pa/ffi.lo
-nodist_libffi_la_OBJECTS = $(am__objects_1) $(am__objects_2) \
-	$(am__objects_3) $(am__objects_4) $(am__objects_5) \
-	$(am__objects_6) $(am__objects_7) $(am__objects_8) \
-	$(am__objects_9) $(am__objects_10) $(am__objects_11) \
-	$(am__objects_12) $(am__objects_13) $(am__objects_14) \
-	$(am__objects_15) $(am__objects_16) $(am__objects_17) \
-	$(am__objects_18) $(am__objects_19) $(am__objects_20) \
-	$(am__objects_21) $(am__objects_22) $(am__objects_23) \
-	$(am__objects_24) $(am__objects_25) $(am__objects_26)
-libffi_la_OBJECTS = $(am_libffi_la_OBJECTS) \
-	$(nodist_libffi_la_OBJECTS)
-libffi_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(libffi_la_LDFLAGS) $(LDFLAGS) -o $@
-libffi_convenience_la_LIBADD =
-am__objects_27 = src/debug.lo src/prep_cif.lo src/types.lo \
-	src/raw_api.lo src/java_raw_api.lo src/closures.lo
-am_libffi_convenience_la_OBJECTS = $(am__objects_27)
-am__objects_28 = $(am__objects_1) $(am__objects_2) $(am__objects_3) \
-	$(am__objects_4) $(am__objects_5) $(am__objects_6) \
-	$(am__objects_7) $(am__objects_8) $(am__objects_9) \
-	$(am__objects_10) $(am__objects_11) $(am__objects_12) \
-	$(am__objects_13) $(am__objects_14) $(am__objects_15) \
-	$(am__objects_16) $(am__objects_17) $(am__objects_18) \
-	$(am__objects_19) $(am__objects_20) $(am__objects_21) \
-	$(am__objects_22) $(am__objects_23) $(am__objects_24) \
-	$(am__objects_25) $(am__objects_26)
-nodist_libffi_convenience_la_OBJECTS = $(am__objects_28)
-libffi_convenience_la_OBJECTS = $(am_libffi_convenience_la_OBJECTS) \
-	$(nodist_libffi_convenience_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
-LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
-SOURCES = $(libffi_la_SOURCES) $(nodist_libffi_la_SOURCES) \
-	$(libffi_convenience_la_SOURCES) \
-	$(nodist_libffi_convenience_la_SOURCES)
-DIST_SOURCES = $(libffi_la_SOURCES) $(libffi_convenience_la_SOURCES)
-INFO_DEPS = $(srcdir)/doc/libffi.info
-am__TEXINFO_TEX_DIR = $(srcdir)
-DVIS = doc/libffi.dvi
-PDFS = doc/libffi.pdf
-PSS = doc/libffi.ps
-HTMLS = doc/libffi.html
-TEXINFOS = doc/libffi.texi
-TEXI2DVI = texi2dvi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-DATA = $(pkgconfig_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d "$(distdir)" \
-    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr "$(distdir)"; }; }
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = ${SHELL} /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi/missing --run aclocal-1.11
-ALLOCA = 
-AMTAR = ${SHELL} /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi/missing --run tar
-AM_LTLDFLAGS = 
-AM_RUNTESTFLAGS = 
-AR = ar
-AUTOCONF = ${SHELL} /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi/missing --run automake-1.11
-AWK = mawk
-CC = gcc
-CCAS = gcc
-CCASDEPMODE = depmode=none
-CCASFLAGS = 
-CCDEPMODE = depmode=none
-CFLAGS =  -Wall -fexceptions
-CPP = gcc -E
-CPPFLAGS = 
-CYGPATH_W = echo
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-DLLTOOL = false
-DSYMUTIL = 
-DUMPBIN = 
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-FFI_EXEC_TRAMPOLINE_TABLE = 0
-FGREP = /bin/grep -F
-GREP = /bin/grep
-HAVE_LONG_DOUBLE = 1
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-LD = /usr/bin/ld -m elf_x86_64
-LDFLAGS = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LIPO = 
-LN_S = ln -s
-LTLIBOBJS = 
-MAINT = #
-MAKEINFO = ${SHELL} /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi/missing --run makeinfo
-MANIFEST_TOOL = :
-MKDIR_P = /bin/mkdir -p
-NM = /usr/bin/nm -B
-NMEDIT = 
-OBJDUMP = objdump
-OBJEXT = o
-OTOOL = 
-OTOOL64 = 
-PACKAGE = libffi
-PACKAGE_BUGREPORT = http://sourceware.org/libffi.html
-PACKAGE_NAME = libffi
-PACKAGE_STRING = libffi 3.0.10
-PACKAGE_TARNAME = libffi
-PACKAGE_URL = 
-PACKAGE_VERSION = 3.0.10
-PATH_SEPARATOR = :
-PRTDIAG = 
-RANLIB = ranlib
-SED = /bin/sed
-SET_MAKE = 
-SHELL = /bin/bash
-STRIP = strip
-TARGET = X86_64
-TARGETDIR = x86
-VERSION = 3.0.10
-abs_builddir = /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi-x86_64-linux
-abs_srcdir = /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi
-abs_top_builddir = /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi-x86_64-linux
-abs_top_srcdir = /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi
-ac_ct_AR = ar
-ac_ct_CC = gcc
-ac_ct_DUMPBIN = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-ax_enable_builddir_sed = sed
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = ${SHELL} /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi
-sys_symbol_underscore = 
-sysconfdir = ${prefix}/etc
-target = x86_64-unknown-linux-gnu
-target_alias = 
-target_cpu = x86_64
-target_os = linux-gnu
-target_vendor = unknown
-toolexecdir = $(libdir)/gcc-lib/$(target_alias)
-toolexeclibdir = $(libdir)/../lib
-top_build_prefix = 
-top_builddir = .
-top_srcdir = /home/daniel/Workspace/github/vagrant-tiktalik/vendor/bundle/ruby/2.0.0/gems/ffi-1.9.3/ext/ffi_c/libffi
-AUTOMAKE_OPTIONS = foreign subdir-objects
-SUBDIRS = include testsuite man
-EXTRA_DIST = LICENSE ChangeLog.v1 ChangeLog.libgcj configure.host	\
-	src/alpha/ffi.c src/alpha/osf.S src/alpha/ffitarget.h		\
-	src/arm/ffi.c src/arm/sysv.S src/arm/trampoline.S		\
-	src/arm/ffitarget.h src/avr32/ffi.c src/avr32/sysv.S		\
-	src/avr32/ffitarget.h src/cris/ffi.c src/cris/sysv.S		\
-	src/cris/ffitarget.h src/ia64/ffi.c src/ia64/ffitarget.h	\
-	src/ia64/ia64_flags.h src/ia64/unix.S src/mips/ffi.c		\
-	src/mips/n32.S src/mips/o32.S src/mips/ffitarget.h		\
-	src/m32r/ffi.c src/m32r/sysv.S src/m32r/ffitarget.h		\
-	src/m68k/ffi.c src/m68k/sysv.S src/m68k/ffitarget.h		\
-	src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/linux64.S	\
-	src/powerpc/linux64_closure.S src/powerpc/ppc_closure.S		\
-	src/powerpc/asm.h src/powerpc/aix.S src/powerpc/darwin.S	\
-	src/powerpc/aix_closure.S src/powerpc/darwin_closure.S		\
-	src/powerpc/ffi_darwin.c src/powerpc/ffitarget.h		\
-	src/s390/ffi.c src/s390/sysv.S src/s390/ffitarget.h		\
-	src/sh/ffi.c src/sh/sysv.S src/sh/ffitarget.h src/sh64/ffi.c	\
-	src/sh64/sysv.S src/sh64/ffitarget.h src/sparc/v8.S		\
-	src/sparc/v9.S src/sparc/ffitarget.h src/sparc/ffi.c		\
-	src/x86/darwin64.S src/x86/ffi.c src/x86/sysv.S			\
-	src/x86/win32.S src/x86/win64.S src/x86/darwin.S		\
-	src/x86/freebsd.S src/x86/ffi64.c src/x86/unix64.S		\
-	src/x86/ffitarget.h src/pa/ffitarget.h src/pa/ffi.c		\
-	src/pa/linux.S src/pa/hpux32.S src/frv/ffi.c src/frv/eabi.S	\
-	src/frv/ffitarget.h src/dlmalloc.c src/moxie/ffi.c		\
-	src/moxie/eabi.S libtool-version ChangeLog.libffi		\
-	m4/libtool.m4 m4/lt~obsolete.m4 m4/ltoptions.m4 m4/ltsugar.m4	\
-	m4/ltversion.m4 build-ios.sh src/arm/gentramp.sh src/debug.c    \
-	msvcc.sh
-
-info_TEXINFOS = doc/libffi.texi
-
-# Work around what appears to be a GNU make bug handling MAKEFLAGS
-# values defined in terms of make variables, as is the case for CC and
-# friends when we are called from the top level Makefile.
-AM_MAKEFLAGS = \
-	"AR_FLAGS=$(AR_FLAGS)" \
-	"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
-	"CFLAGS=$(CFLAGS)" \
-	"CXXFLAGS=$(CXXFLAGS)" \
-	"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
-	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
-	"INSTALL=$(INSTALL)" \
-	"INSTALL_DATA=$(INSTALL_DATA)" \
-	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-	"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
-	"JC1FLAGS=$(JC1FLAGS)" \
-	"LDFLAGS=$(LDFLAGS)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
-	"MAKE=$(MAKE)" \
-	"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
-	"PICFLAG=$(PICFLAG)" \
-	"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
-	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
-	"SHELL=$(SHELL)" \
-	"exec_prefix=$(exec_prefix)" \
-	"infodir=$(infodir)" \
-	"libdir=$(libdir)" \
-	"mandir=$(mandir)" \
-	"prefix=$(prefix)" \
-	"AR=$(AR)" \
-	"AS=$(AS)" \
-	"CC=$(CC)" \
-	"CXX=$(CXX)" \
-	"LD=$(LD)" \
-	"NM=$(NM)" \
-	"RANLIB=$(RANLIB)" \
-	"DESTDIR=$(DESTDIR)"
-
-MAKEOVERRIDES = 
-ACLOCAL_AMFLAGS = $(ACLOCAL_AMFLAGS) -I m4
-lib_LTLIBRARIES = libffi.la
-noinst_LTLIBRARIES = libffi_convenience.la
-libffi_la_SOURCES = src/debug.c src/prep_cif.c src/types.c \
-		src/raw_api.c src/java_raw_api.c src/closures.c
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = libffi.pc
-nodist_libffi_la_SOURCES = $(am__append_1) $(am__append_2) \
-	$(am__append_3) $(am__append_4) $(am__append_5) \
-	$(am__append_6) $(am__append_7) $(am__append_8) \
-	$(am__append_9) $(am__append_10) $(am__append_11) \
-	$(am__append_12) $(am__append_13) $(am__append_14) \
-	$(am__append_15) $(am__append_16) $(am__append_17) \
-	$(am__append_18) $(am__append_19) $(am__append_20) \
-	$(am__append_21) $(am__append_22) $(am__append_23) \
-	$(am__append_24) $(am__append_25) $(am__append_26)
-libffi_convenience_la_SOURCES = $(libffi_la_SOURCES)
-nodist_libffi_convenience_la_SOURCES = $(nodist_libffi_la_SOURCES)
-AM_CFLAGS = -g $(am__append_27)
-libffi_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` $(LTLDFLAGS) $(AM_LTLDFLAGS)
-AM_CPPFLAGS = -I. -I$(top_srcdir)/include -Iinclude -I$(top_srcdir)/src
-AM_CCASFLAGS = $(AM_CPPFLAGS)
-all: fficonfig.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .S .c .dvi .lo .o .obj .ps
-am--refresh:
-	@:
-$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: # $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-fficonfig.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/fficonfig.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status fficonfig.h
-$(srcdir)/fficonfig.h.in: # $(am__configure_deps) 
-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f fficonfig.h stamp-h1
-libffi.pc: $(top_builddir)/config.status $(srcdir)/libffi.pc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	list2=; for p in $$list; do \
-	  if test -f $$p; then \
-	    list2="$$list2 $$p"; \
-	  else :; fi; \
-	done; \
-	test -z "$$list2" || { \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
-	}
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-
-clean-noinstLTLIBRARIES:
-	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-src/$(am__dirstamp):
-	@$(MKDIR_P) src
-	@: > src/$(am__dirstamp)
-src/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/$(DEPDIR)
-	@: > src/$(DEPDIR)/$(am__dirstamp)
-src/debug.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/prep_cif.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/types.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/raw_api.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/java_raw_api.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/closures.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
-src/mips/$(am__dirstamp):
-	@$(MKDIR_P) src/mips
-	@: > src/mips/$(am__dirstamp)
-src/mips/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/mips/$(DEPDIR)
-	@: > src/mips/$(DEPDIR)/$(am__dirstamp)
-src/mips/ffi.lo: src/mips/$(am__dirstamp) \
-	src/mips/$(DEPDIR)/$(am__dirstamp)
-src/mips/o32.lo: src/mips/$(am__dirstamp) \
-	src/mips/$(DEPDIR)/$(am__dirstamp)
-src/mips/n32.lo: src/mips/$(am__dirstamp) \
-	src/mips/$(DEPDIR)/$(am__dirstamp)
-src/x86/$(am__dirstamp):
-	@$(MKDIR_P) src/x86
-	@: > src/x86/$(am__dirstamp)
-src/x86/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/x86/$(DEPDIR)
-	@: > src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/ffi.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/sysv.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/freebsd.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/win32.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/win64.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/darwin.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/ffi64.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/x86/darwin64.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/sparc/$(am__dirstamp):
-	@$(MKDIR_P) src/sparc
-	@: > src/sparc/$(am__dirstamp)
-src/sparc/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/sparc/$(DEPDIR)
-	@: > src/sparc/$(DEPDIR)/$(am__dirstamp)
-src/sparc/ffi.lo: src/sparc/$(am__dirstamp) \
-	src/sparc/$(DEPDIR)/$(am__dirstamp)
-src/sparc/v8.lo: src/sparc/$(am__dirstamp) \
-	src/sparc/$(DEPDIR)/$(am__dirstamp)
-src/sparc/v9.lo: src/sparc/$(am__dirstamp) \
-	src/sparc/$(DEPDIR)/$(am__dirstamp)
-src/alpha/$(am__dirstamp):
-	@$(MKDIR_P) src/alpha
-	@: > src/alpha/$(am__dirstamp)
-src/alpha/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/alpha/$(DEPDIR)
-	@: > src/alpha/$(DEPDIR)/$(am__dirstamp)
-src/alpha/ffi.lo: src/alpha/$(am__dirstamp) \
-	src/alpha/$(DEPDIR)/$(am__dirstamp)
-src/alpha/osf.lo: src/alpha/$(am__dirstamp) \
-	src/alpha/$(DEPDIR)/$(am__dirstamp)
-src/ia64/$(am__dirstamp):
-	@$(MKDIR_P) src/ia64
-	@: > src/ia64/$(am__dirstamp)
-src/ia64/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/ia64/$(DEPDIR)
-	@: > src/ia64/$(DEPDIR)/$(am__dirstamp)
-src/ia64/ffi.lo: src/ia64/$(am__dirstamp) \
-	src/ia64/$(DEPDIR)/$(am__dirstamp)
-src/ia64/unix.lo: src/ia64/$(am__dirstamp) \
-	src/ia64/$(DEPDIR)/$(am__dirstamp)
-src/m32r/$(am__dirstamp):
-	@$(MKDIR_P) src/m32r
-	@: > src/m32r/$(am__dirstamp)
-src/m32r/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/m32r/$(DEPDIR)
-	@: > src/m32r/$(DEPDIR)/$(am__dirstamp)
-src/m32r/sysv.lo: src/m32r/$(am__dirstamp) \
-	src/m32r/$(DEPDIR)/$(am__dirstamp)
-src/m32r/ffi.lo: src/m32r/$(am__dirstamp) \
-	src/m32r/$(DEPDIR)/$(am__dirstamp)
-src/m68k/$(am__dirstamp):
-	@$(MKDIR_P) src/m68k
-	@: > src/m68k/$(am__dirstamp)
-src/m68k/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/m68k/$(DEPDIR)
-	@: > src/m68k/$(DEPDIR)/$(am__dirstamp)
-src/m68k/ffi.lo: src/m68k/$(am__dirstamp) \
-	src/m68k/$(DEPDIR)/$(am__dirstamp)
-src/m68k/sysv.lo: src/m68k/$(am__dirstamp) \
-	src/m68k/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/$(am__dirstamp):
-	@$(MKDIR_P) src/powerpc
-	@: > src/powerpc/$(am__dirstamp)
-src/powerpc/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/powerpc/$(DEPDIR)
-	@: > src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/ffi.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/sysv.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/ppc_closure.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/linux64.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/linux64_closure.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/ffi_darwin.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/aix.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/aix_closure.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/darwin.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/powerpc/darwin_closure.lo: src/powerpc/$(am__dirstamp) \
-	src/powerpc/$(DEPDIR)/$(am__dirstamp)
-src/arm/$(am__dirstamp):
-	@$(MKDIR_P) src/arm
-	@: > src/arm/$(am__dirstamp)
-src/arm/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/arm/$(DEPDIR)
-	@: > src/arm/$(DEPDIR)/$(am__dirstamp)
-src/arm/sysv.lo: src/arm/$(am__dirstamp) \
-	src/arm/$(DEPDIR)/$(am__dirstamp)
-src/arm/ffi.lo: src/arm/$(am__dirstamp) \
-	src/arm/$(DEPDIR)/$(am__dirstamp)
-src/arm/trampoline.lo: src/arm/$(am__dirstamp) \
-	src/arm/$(DEPDIR)/$(am__dirstamp)
-src/avr32/$(am__dirstamp):
-	@$(MKDIR_P) src/avr32
-	@: > src/avr32/$(am__dirstamp)
-src/avr32/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/avr32/$(DEPDIR)
-	@: > src/avr32/$(DEPDIR)/$(am__dirstamp)
-src/avr32/sysv.lo: src/avr32/$(am__dirstamp) \
-	src/avr32/$(DEPDIR)/$(am__dirstamp)
-src/avr32/ffi.lo: src/avr32/$(am__dirstamp) \
-	src/avr32/$(DEPDIR)/$(am__dirstamp)
-src/cris/$(am__dirstamp):
-	@$(MKDIR_P) src/cris
-	@: > src/cris/$(am__dirstamp)
-src/cris/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/cris/$(DEPDIR)
-	@: > src/cris/$(DEPDIR)/$(am__dirstamp)
-src/cris/sysv.lo: src/cris/$(am__dirstamp) \
-	src/cris/$(DEPDIR)/$(am__dirstamp)
-src/cris/ffi.lo: src/cris/$(am__dirstamp) \
-	src/cris/$(DEPDIR)/$(am__dirstamp)
-src/frv/$(am__dirstamp):
-	@$(MKDIR_P) src/frv
-	@: > src/frv/$(am__dirstamp)
-src/frv/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/frv/$(DEPDIR)
-	@: > src/frv/$(DEPDIR)/$(am__dirstamp)
-src/frv/eabi.lo: src/frv/$(am__dirstamp) \
-	src/frv/$(DEPDIR)/$(am__dirstamp)
-src/frv/ffi.lo: src/frv/$(am__dirstamp) \
-	src/frv/$(DEPDIR)/$(am__dirstamp)
-src/s390/$(am__dirstamp):
-	@$(MKDIR_P) src/s390
-	@: > src/s390/$(am__dirstamp)
-src/s390/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/s390/$(DEPDIR)
-	@: > src/s390/$(DEPDIR)/$(am__dirstamp)
-src/s390/sysv.lo: src/s390/$(am__dirstamp) \
-	src/s390/$(DEPDIR)/$(am__dirstamp)
-src/s390/ffi.lo: src/s390/$(am__dirstamp) \
-	src/s390/$(DEPDIR)/$(am__dirstamp)
-src/x86/unix64.lo: src/x86/$(am__dirstamp) \
-	src/x86/$(DEPDIR)/$(am__dirstamp)
-src/sh/$(am__dirstamp):
-	@$(MKDIR_P) src/sh
-	@: > src/sh/$(am__dirstamp)
-src/sh/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/sh/$(DEPDIR)
-	@: > src/sh/$(DEPDIR)/$(am__dirstamp)
-src/sh/sysv.lo: src/sh/$(am__dirstamp) \
-	src/sh/$(DEPDIR)/$(am__dirstamp)
-src/sh/ffi.lo: src/sh/$(am__dirstamp) src/sh/$(DEPDIR)/$(am__dirstamp)
-src/sh64/$(am__dirstamp):
-	@$(MKDIR_P) src/sh64
-	@: > src/sh64/$(am__dirstamp)
-src/sh64/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/sh64/$(DEPDIR)
-	@: > src/sh64/$(DEPDIR)/$(am__dirstamp)
-src/sh64/sysv.lo: src/sh64/$(am__dirstamp) \
-	src/sh64/$(DEPDIR)/$(am__dirstamp)
-src/sh64/ffi.lo: src/sh64/$(am__dirstamp) \
-	src/sh64/$(DEPDIR)/$(am__dirstamp)
-src/pa/$(am__dirstamp):
-	@$(MKDIR_P) src/pa
-	@: > src/pa/$(am__dirstamp)
-src/pa/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) src/pa/$(DEPDIR)
-	@: > src/pa/$(DEPDIR)/$(am__dirstamp)
-src/pa/linux.lo: src/pa/$(am__dirstamp) \
-	src/pa/$(DEPDIR)/$(am__dirstamp)
-src/pa/ffi.lo: src/pa/$(am__dirstamp) src/pa/$(DEPDIR)/$(am__dirstamp)
-src/pa/hpux32.lo: src/pa/$(am__dirstamp) \
-	src/pa/$(DEPDIR)/$(am__dirstamp)
-libffi.la: $(libffi_la_OBJECTS) $(libffi_la_DEPENDENCIES) 
-	$(libffi_la_LINK) -rpath $(libdir) $(libffi_la_OBJECTS) $(libffi_la_LIBADD) $(LIBS)
-libffi_convenience.la: $(libffi_convenience_la_OBJECTS) $(libffi_convenience_la_DEPENDENCIES) 
-	$(LINK)  $(libffi_convenience_la_OBJECTS) $(libffi_convenience_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-	-rm -f src/alpha/ffi.$(OBJEXT)
-	-rm -f src/alpha/ffi.lo
-	-rm -f src/alpha/osf.$(OBJEXT)
-	-rm -f src/alpha/osf.lo
-	-rm -f src/arm/ffi.$(OBJEXT)
-	-rm -f src/arm/ffi.lo
-	-rm -f src/arm/sysv.$(OBJEXT)
-	-rm -f src/arm/sysv.lo
-	-rm -f src/arm/trampoline.$(OBJEXT)
-	-rm -f src/arm/trampoline.lo
-	-rm -f src/avr32/ffi.$(OBJEXT)
-	-rm -f src/avr32/ffi.lo
-	-rm -f src/avr32/sysv.$(OBJEXT)
-	-rm -f src/avr32/sysv.lo
-	-rm -f src/closures.$(OBJEXT)
-	-rm -f src/closures.lo
-	-rm -f src/cris/ffi.$(OBJEXT)
-	-rm -f src/cris/ffi.lo
-	-rm -f src/cris/sysv.$(OBJEXT)
-	-rm -f src/cris/sysv.lo
-	-rm -f src/debug.$(OBJEXT)
-	-rm -f src/debug.lo
-	-rm -f src/frv/eabi.$(OBJEXT)
-	-rm -f src/frv/eabi.lo
-	-rm -f src/frv/ffi.$(OBJEXT)
-	-rm -f src/frv/ffi.lo
-	-rm -f src/ia64/ffi.$(OBJEXT)
-	-rm -f src/ia64/ffi.lo
-	-rm -f src/ia64/unix.$(OBJEXT)
-	-rm -f src/ia64/unix.lo
-	-rm -f src/java_raw_api.$(OBJEXT)
-	-rm -f src/java_raw_api.lo
-	-rm -f src/m32r/ffi.$(OBJEXT)
-	-rm -f src/m32r/ffi.lo
-	-rm -f src/m32r/sysv.$(OBJEXT)
-	-rm -f src/m32r/sysv.lo
-	-rm -f src/m68k/ffi.$(OBJEXT)
-	-rm -f src/m68k/ffi.lo
-	-rm -f src/m68k/sysv.$(OBJEXT)
-	-rm -f src/m68k/sysv.lo
-	-rm -f src/mips/ffi.$(OBJEXT)
-	-rm -f src/mips/ffi.lo
-	-rm -f src/mips/n32.$(OBJEXT)
-	-rm -f src/mips/n32.lo
-	-rm -f src/mips/o32.$(OBJEXT)
-	-rm -f src/mips/o32.lo
-	-rm -f src/pa/ffi.$(OBJEXT)
-	-rm -f src/pa/ffi.lo
-	-rm -f src/pa/hpux32.$(OBJEXT)
-	-rm -f src/pa/hpux32.lo
-	-rm -f src/pa/linux.$(OBJEXT)
-	-rm -f src/pa/linux.lo
-	-rm -f src/powerpc/aix.$(OBJEXT)
-	-rm -f src/powerpc/aix.lo
-	-rm -f src/powerpc/aix_closure.$(OBJEXT)
-	-rm -f src/powerpc/aix_closure.lo
-	-rm -f src/powerpc/darwin.$(OBJEXT)
-	-rm -f src/powerpc/darwin.lo
-	-rm -f src/powerpc/darwin_closure.$(OBJEXT)
-	-rm -f src/powerpc/darwin_closure.lo
-	-rm -f src/powerpc/ffi.$(OBJEXT)
-	-rm -f src/powerpc/ffi.lo
-	-rm -f src/powerpc/ffi_darwin.$(OBJEXT)
-	-rm -f src/powerpc/ffi_darwin.lo
-	-rm -f src/powerpc/linux64.$(OBJEXT)
-	-rm -f src/powerpc/linux64.lo
-	-rm -f src/powerpc/linux64_closure.$(OBJEXT)
-	-rm -f src/powerpc/linux64_closure.lo
-	-rm -f src/powerpc/ppc_closure.$(OBJEXT)
-	-rm -f src/powerpc/ppc_closure.lo
-	-rm -f src/powerpc/sysv.$(OBJEXT)
-	-rm -f src/powerpc/sysv.lo
-	-rm -f src/prep_cif.$(OBJEXT)
-	-rm -f src/prep_cif.lo
-	-rm -f src/raw_api.$(OBJEXT)
-	-rm -f src/raw_api.lo
-	-rm -f src/s390/ffi.$(OBJEXT)
-	-rm -f src/s390/ffi.lo
-	-rm -f src/s390/sysv.$(OBJEXT)
-	-rm -f src/s390/sysv.lo
-	-rm -f src/sh/ffi.$(OBJEXT)
-	-rm -f src/sh/ffi.lo
-	-rm -f src/sh/sysv.$(OBJEXT)
-	-rm -f src/sh/sysv.lo
-	-rm -f src/sh64/ffi.$(OBJEXT)
-	-rm -f src/sh64/ffi.lo
-	-rm -f src/sh64/sysv.$(OBJEXT)
-	-rm -f src/sh64/sysv.lo
-	-rm -f src/sparc/ffi.$(OBJEXT)
-	-rm -f src/sparc/ffi.lo
-	-rm -f src/sparc/v8.$(OBJEXT)
-	-rm -f src/sparc/v8.lo
-	-rm -f src/sparc/v9.$(OBJEXT)
-	-rm -f src/sparc/v9.lo
-	-rm -f src/types.$(OBJEXT)
-	-rm -f src/types.lo
-	-rm -f src/x86/darwin.$(OBJEXT)
-	-rm -f src/x86/darwin.lo
-	-rm -f src/x86/darwin64.$(OBJEXT)
-	-rm -f src/x86/darwin64.lo
-	-rm -f src/x86/ffi.$(OBJEXT)
-	-rm -f src/x86/ffi.lo
-	-rm -f src/x86/ffi64.$(OBJEXT)
-	-rm -f src/x86/ffi64.lo
-	-rm -f src/x86/freebsd.$(OBJEXT)
-	-rm -f src/x86/freebsd.lo
-	-rm -f src/x86/sysv.$(OBJEXT)
-	-rm -f src/x86/sysv.lo
-	-rm -f src/x86/unix64.$(OBJEXT)
-	-rm -f src/x86/unix64.lo
-	-rm -f src/x86/win32.$(OBJEXT)
-	-rm -f src/x86/win32.lo
-	-rm -f src/x86/win64.$(OBJEXT)
-	-rm -f src/x86/win64.lo
-
-distclean-compile:
-	-rm -f *.tab.c
-
-#include src/$(DEPDIR)/closures.Plo
-#include src/$(DEPDIR)/debug.Plo
-#include src/$(DEPDIR)/java_raw_api.Plo
-#include src/$(DEPDIR)/prep_cif.Plo
-#include src/$(DEPDIR)/raw_api.Plo
-#include src/$(DEPDIR)/types.Plo
-#include src/alpha/$(DEPDIR)/ffi.Plo
-#include src/alpha/$(DEPDIR)/osf.Plo
-#include src/arm/$(DEPDIR)/ffi.Plo
-#include src/arm/$(DEPDIR)/sysv.Plo
-#include src/arm/$(DEPDIR)/trampoline.Plo
-#include src/avr32/$(DEPDIR)/ffi.Plo
-#include src/avr32/$(DEPDIR)/sysv.Plo
-#include src/cris/$(DEPDIR)/ffi.Plo
-#include src/cris/$(DEPDIR)/sysv.Plo
-#include src/frv/$(DEPDIR)/eabi.Plo
-#include src/frv/$(DEPDIR)/ffi.Plo
-#include src/ia64/$(DEPDIR)/ffi.Plo
-#include src/ia64/$(DEPDIR)/unix.Plo
-#include src/m32r/$(DEPDIR)/ffi.Plo
-#include src/m32r/$(DEPDIR)/sysv.Plo
-#include src/m68k/$(DEPDIR)/ffi.Plo
-#include src/m68k/$(DEPDIR)/sysv.Plo
-#include src/mips/$(DEPDIR)/ffi.Plo
-#include src/mips/$(DEPDIR)/n32.Plo
-#include src/mips/$(DEPDIR)/o32.Plo
-#include src/pa/$(DEPDIR)/ffi.Plo
-#include src/pa/$(DEPDIR)/hpux32.Plo
-#include src/pa/$(DEPDIR)/linux.Plo
-#include src/powerpc/$(DEPDIR)/aix.Plo
-#include src/powerpc/$(DEPDIR)/aix_closure.Plo
-#include src/powerpc/$(DEPDIR)/darwin.Plo
-#include src/powerpc/$(DEPDIR)/darwin_closure.Plo
-#include src/powerpc/$(DEPDIR)/ffi.Plo
-#include src/powerpc/$(DEPDIR)/ffi_darwin.Plo
-#include src/powerpc/$(DEPDIR)/linux64.Plo
-#include src/powerpc/$(DEPDIR)/linux64_closure.Plo
-#include src/powerpc/$(DEPDIR)/ppc_closure.Plo
-#include src/powerpc/$(DEPDIR)/sysv.Plo
-#include src/s390/$(DEPDIR)/ffi.Plo
-#include src/s390/$(DEPDIR)/sysv.Plo
-#include src/sh/$(DEPDIR)/ffi.Plo
-#include src/sh/$(DEPDIR)/sysv.Plo
-#include src/sh64/$(DEPDIR)/ffi.Plo
-#include src/sh64/$(DEPDIR)/sysv.Plo
-#include src/sparc/$(DEPDIR)/ffi.Plo
-#include src/sparc/$(DEPDIR)/v8.Plo
-#include src/sparc/$(DEPDIR)/v9.Plo
-#include src/x86/$(DEPDIR)/darwin.Plo
-#include src/x86/$(DEPDIR)/darwin64.Plo
-#include src/x86/$(DEPDIR)/ffi.Plo
-#include src/x86/$(DEPDIR)/ffi64.Plo
-#include src/x86/$(DEPDIR)/freebsd.Plo
-#include src/x86/$(DEPDIR)/sysv.Plo
-#include src/x86/$(DEPDIR)/unix64.Plo
-#include src/x86/$(DEPDIR)/win32.Plo
-#include src/x86/$(DEPDIR)/win64.Plo
-
-.S.o:
-#	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
-#	$(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-#	$(am__mv) $$depbase.Tpo $$depbase.Po
-#	source='$<' object='$@' libtool=no 
-#	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) 
-	$(CPPASCOMPILE) -c -o $@ $<
-
-.S.obj:
-#	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
-#	$(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
-#	$(am__mv) $$depbase.Tpo $$depbase.Po
-#	source='$<' object='$@' libtool=no 
-#	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) 
-	$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.S.lo:
-#	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
-#	$(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-#	$(am__mv) $$depbase.Tpo $$depbase.Plo
-#	source='$<' object='$@' libtool=yes 
-#	DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) 
-	$(LTCPPASCOMPILE) -c -o $@ $<
-
-.c.o:
-#	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
-#	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-#	$(am__mv) $$depbase.Tpo $$depbase.Po
-#	source='$<' object='$@' libtool=no 
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) 
-	$(COMPILE) -c -o $@ $<
-
-.c.obj:
-#	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
-#	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
-#	$(am__mv) $$depbase.Tpo $$depbase.Po
-#	source='$<' object='$@' libtool=no 
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) 
-	$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.c.lo:
-#	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
-#	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
-#	$(am__mv) $$depbase.Tpo $$depbase.Plo
-#	source='$<' object='$@' libtool=yes 
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) 
-	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-	-rm -rf src/.libs src/_libs
-	-rm -rf src/alpha/.libs src/alpha/_libs
-	-rm -rf src/arm/.libs src/arm/_libs
-	-rm -rf src/avr32/.libs src/avr32/_libs
-	-rm -rf src/cris/.libs src/cris/_libs
-	-rm -rf src/frv/.libs src/frv/_libs
-	-rm -rf src/ia64/.libs src/ia64/_libs
-	-rm -rf src/m32r/.libs src/m32r/_libs
-	-rm -rf src/m68k/.libs src/m68k/_libs
-	-rm -rf src/mips/.libs src/mips/_libs
-	-rm -rf src/pa/.libs src/pa/_libs
-	-rm -rf src/powerpc/.libs src/powerpc/_libs
-	-rm -rf src/s390/.libs src/s390/_libs
-	-rm -rf src/sh/.libs src/sh/_libs
-	-rm -rf src/sh64/.libs src/sh64/_libs
-	-rm -rf src/sparc/.libs src/sparc/_libs
-	-rm -rf src/x86/.libs src/x86/_libs
-
-distclean-libtool:
-	-rm -f libtool config.lt
-doc/$(am__dirstamp):
-	@$(MKDIR_P) doc
-	@: > doc/$(am__dirstamp)
-
-$(srcdir)/doc/libffi.info: doc/libffi.texi $(srcdir)/doc/version.texi
-	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
-	rm -rf $$backupdir && mkdir $$backupdir && \
-	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
-	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
-	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
-	  done; \
-	else :; fi && \
-	cd "$$am__cwd"; \
-	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-	 -o $@ $(srcdir)/doc/libffi.texi; \
-	then \
-	  rc=0; \
-	  $(am__cd) $(srcdir); \
-	else \
-	  rc=$$?; \
-	  $(am__cd) $(srcdir) && \
-	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
-	fi; \
-	rm -rf $$backupdir; exit $$rc
-
-doc/libffi.dvi: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp)
-	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
-	$(TEXI2DVI) -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi
-
-doc/libffi.pdf: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp)
-	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
-	$(TEXI2PDF) -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi
-
-doc/libffi.html: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp)
-	rm -rf $(@:.html=.htp)
-	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
-	 -o $(@:.html=.htp) `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi; \
-	then \
-	  rm -rf $@; \
-	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
-	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
-	else \
-	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
-	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
-	  exit 1; \
-	fi
-$(srcdir)/doc/version.texi: # $(srcdir)/doc/stamp-vti
-$(srcdir)/doc/stamp-vti: doc/libffi.texi $(top_srcdir)/configure
-	test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
-	@(dir=.; test -f ./doc/libffi.texi || dir=$(srcdir); \
-	set `$(SHELL) $(srcdir)/mdate-sh $$dir/doc/libffi.texi`; \
-	echo "@set UPDATED $$1 $$2 $$3"; \
-	echo "@set UPDATED-MONTH $$2 $$3"; \
-	echo "@set EDITION $(VERSION)"; \
-	echo "@set VERSION $(VERSION)") > vti.tmp
-	@cmp -s vti.tmp $(srcdir)/doc/version.texi \
-	  || (echo "Updating $(srcdir)/doc/version.texi"; \
-	      cp vti.tmp $(srcdir)/doc/version.texi)
-	-@rm -f vti.tmp
-	@cp $(srcdir)/doc/version.texi $@
-
-mostlyclean-vti:
-	-rm -f vti.tmp
-
-maintainer-clean-vti:
-#	-rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi
-.dvi.ps:
-	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	$(DVIPS) -o $@ $<
-
-uninstall-dvi-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
-	done
-
-uninstall-html-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
-	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
-	done
-
-uninstall-info-am:
-	@$(PRE_UNINSTALL)
-	@if test -d '$(DESTDIR)$(infodir)' && \
-	    (install-info --version && \
-	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
-	  list='$(INFO_DEPS)'; \
-	  for file in $$list; do \
-	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
-	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
-	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
-	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
-	  done; \
-	else :; fi
-	@$(NORMAL_UNINSTALL)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
-	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
-	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
-	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
-	   else :; fi); \
-	done
-
-uninstall-pdf-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-uninstall-ps-am:
-	@$(NORMAL_UNINSTALL)
-	@list='$(PSS)'; test -n "$(psdir)" || list=; \
-	for p in $$list; do \
-	  $(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
-	done
-
-dist-info: $(INFO_DEPS)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	list='$(INFO_DEPS)'; \
-	for base in $$list; do \
-	  case $$base in \
-	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
-	  esac; \
-	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
-	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
-	    if test -f $$file; then \
-	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
-	      test -f "$(distdir)/$$relfile" || \
-		cp -p $$file "$(distdir)/$$relfile"; \
-	    else :; fi; \
-	  done; \
-	done
-
-mostlyclean-aminfo:
-	-rm -rf libffi.aux libffi.cp libffi.cps libffi.fn libffi.ky libffi.log \
-	  libffi.pg libffi.tmp libffi.toc libffi.tp libffi.vr
-
-clean-aminfo:
-	-test -z "doc/libffi.dvi doc/libffi.pdf doc/libffi.ps doc/libffi.html" \
-	|| rm -rf doc/libffi.dvi doc/libffi.pdf doc/libffi.ps doc/libffi.html
-
-maintainer-clean-aminfo:
-	@list='$(INFO_DEPS)'; for i in $$list; do \
-	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
-	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
-	done
-install-pkgconfigDATA: $(pkgconfig_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
-	done
-
-uninstall-pkgconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	test -n "$$files" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) fficonfig.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS) fficonfig.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) fficonfig.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) fficonfig.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-info
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lzma*) \
-	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@$(am__cd) '$(distuninstallcheck_dir)' \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) $(DATA) fficonfig.h
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(pkgconfigdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-rm -f doc/$(am__dirstamp)
-	-rm -f src/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/$(am__dirstamp)
-	-rm -f src/alpha/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/alpha/$(am__dirstamp)
-	-rm -f src/arm/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/arm/$(am__dirstamp)
-	-rm -f src/avr32/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/avr32/$(am__dirstamp)
-	-rm -f src/cris/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/cris/$(am__dirstamp)
-	-rm -f src/frv/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/frv/$(am__dirstamp)
-	-rm -f src/ia64/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/ia64/$(am__dirstamp)
-	-rm -f src/m32r/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/m32r/$(am__dirstamp)
-	-rm -f src/m68k/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/m68k/$(am__dirstamp)
-	-rm -f src/mips/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/mips/$(am__dirstamp)
-	-rm -f src/pa/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/pa/$(am__dirstamp)
-	-rm -f src/powerpc/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/powerpc/$(am__dirstamp)
-	-rm -f src/s390/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/s390/$(am__dirstamp)
-	-rm -f src/sh/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/sh/$(am__dirstamp)
-	-rm -f src/sh64/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/sh64/$(am__dirstamp)
-	-rm -f src/sparc/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/sparc/$(am__dirstamp)
-	-rm -f src/x86/$(DEPDIR)/$(am__dirstamp)
-	-rm -f src/x86/$(am__dirstamp)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-aminfo clean-generic clean-libLTLIBRARIES \
-	clean-libtool clean-noinstLTLIBRARIES mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf src/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/avr32/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/mips/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/x86/$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am: $(DVIS)
-
-html: html-recursive
-
-html-am: $(HTMLS)
-
-info: info-recursive
-
-info-am: $(INFO_DEPS)
-
-install-data-am: install-info-am install-pkgconfigDATA
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am: $(DVIS)
-	@$(NORMAL_INSTALL)
-	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
-	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
-	done
-install-exec-am: install-libLTLIBRARIES
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  $(am__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
-	  else \
-	    list2="$$list2 $$d$$p"; \
-	  fi; \
-	done; \
-	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
-	done; }
-install-info: install-info-recursive
-
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
-	for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	  esac; \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
-	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
-	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
-	    if test -f $$ifile; then \
-	      echo "$$ifile"; \
-	    else : ; fi; \
-	  done; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
-	@$(POST_INSTALL)
-	@if (install-info --version && \
-	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
-	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
-	  for file in $$list; do \
-	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
-	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
-	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
-	  done; \
-	else : ; fi
-install-man:
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-install-ps: install-ps-recursive
-
-install-ps-am: $(PSS)
-	@$(NORMAL_INSTALL)
-	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
-	@list='$(PSS)'; test -n "$(psdir)" || list=; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf src/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/avr32/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/mips/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/x86/$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
-	maintainer-clean-generic maintainer-clean-vti
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool mostlyclean-vti
-
-pdf: pdf-recursive
-
-pdf-am: $(PDFS)
-
-ps: ps-recursive
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
-	uninstall-libLTLIBRARIES uninstall-pdf-am \
-	uninstall-pkgconfigDATA uninstall-ps-am
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-	ctags-recursive install-am install-strip tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-aminfo \
-	clean-generic clean-libLTLIBRARIES clean-libtool \
-	clean-noinstLTLIBRARIES ctags ctags-recursive dist dist-all \
-	dist-bzip2 dist-gzip dist-info dist-lzma dist-shar dist-tarZ \
-	dist-xz dist-zip distcheck distclean distclean-compile \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-libLTLIBRARIES \
-	install-man install-pdf install-pdf-am install-pkgconfigDATA \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-aminfo maintainer-clean-generic \
-	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-vti pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
-	uninstall-info-am uninstall-libLTLIBRARIES uninstall-pdf-am \
-	uninstall-pkgconfigDATA uninstall-ps-am
-
-
-# No install-html or install-pdf support in automake yet
-.PHONY: install-html install-pdf
-install-html:
-install-pdf:
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: