vagrant-shell 0.2.9 → 0.2.11

data/demo/templates/vendor/bundle/ruby/1.9.1/gems/ffi-1.8.1/ext/ffi_c/libffi/m4/ax_enable_builddir.m4

@@ -1,300 +0,0 @@
-# ===========================================================================
-#    http://www.gnu.org/software/autoconf-archive/ax_enable_builddir.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_ENABLE_BUILDDIR [(dirstring-or-command [,Makefile.mk [,-all]])]
-#
-# DESCRIPTION
-#
-#   If the current configure was run within the srcdir then we move all
-#   configure-files into a subdir and let the configure steps continue
-#   there. We provide an option --disable-builddir to suppress the move into
-#   a separate builddir.
-#
-#   Defaults:
-#
-#     $1 = $host (overridden with $HOST)
-#     $2 = Makefile.mk
-#     $3 = -all
-#
-#   This macro must be called before AM_INIT_AUTOMAKE. It creates a default
-#   toplevel srcdir Makefile from the information found in the created
-#   toplevel builddir Makefile. It just copies the variables and
-#   rule-targets, each extended with a default rule-execution that recurses
-#   into the build directory of the current "HOST". You can override the
-#   auto-dection through `config.guess` and build-time of course, as in
-#
-#     make HOST=i386-mingw-cross
-#
-#   which can of course set at configure time as well using
-#
-#     configure --host=i386-mingw-cross
-#
-#   After the default has been created, additional rules can be appended
-#   that will not just recurse into the subdirectories and only ever exist
-#   in the srcdir toplevel makefile - these parts are read from the $2 =
-#   Makefile.mk file
-#
-#   The automatic rules are usually scanning the toplevel Makefile for lines
-#   like '#### $host |$builddir' to recognize the place where to recurse
-#   into. Usually, the last one is the only one used. However, almost all
-#   targets have an additional "*-all" rule which makes the script to
-#   recurse into _all_ variants of the current HOST (!!) setting. The "-all"
-#   suffix can be overriden for the macro as well.
-#
-#   a special rule is only given for things like "dist" that will copy the
-#   tarball from the builddir to the sourcedir (or $(PUB)) for reason of
-#   convenience.
-#
-# LICENSE
-#
-#   Copyright (c) 2009 Guido U. Draheim <guidod@gmx.de>
-#   Copyright (c) 2009 Alan Jenkins <alan-jenkins@tuffmail.co.uk>
-#
-#   This program is free software; you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation; either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 22
-
-AC_DEFUN([AX_ENABLE_BUILDDIR],[
-AC_REQUIRE([AC_CANONICAL_HOST])[]dnl
-AC_REQUIRE([AX_CONFIGURE_ARGS])[]dnl
-AC_REQUIRE([AM_AUX_DIR_EXPAND])[]dnl
-AC_BEFORE([$0],[AM_INIT_AUTOMAKE])dnl
-AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
-AS_VAR_PUSHDEF([AUX],[ax_enable_builddir_auxdir])dnl
-AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
-SUB="."
-AC_ARG_ENABLE([builddir], AS_HELP_STRING(
-  [--disable-builddir],[disable automatic build in subdir of sources])
-  ,[SUB="$enableval"], [SUB="auto"])
-if test ".$ac_srcdir_defaulted" != ".no" ; then
-if test ".$srcdir" = ".." ; then
-  if test -f config.status ; then
-    AC_MSG_NOTICE(toplevel srcdir already configured... skipping subdir build)
-  else
-    test ".$SUB" = "."  && SUB="."
-    test ".$SUB" = ".no"  && SUB="."
-    test ".$TARGET" = "." && TARGET="$target"
-    test ".$SUB" = ".auto" && SUB="m4_ifval([$1], [$1],[$TARGET])"
-    if test ".$SUB" != ".." ; then    # we know where to go and
-      AS_MKDIR_P([$SUB])
-      echo __.$SUB.__ > $SUB/conftest.tmp
-      cd $SUB
-      if grep __.$SUB.__ conftest.tmp >/dev/null 2>/dev/null ; then
-        rm conftest.tmp
-        AC_MSG_RESULT([continue configure in default builddir "./$SUB"])
-      else
-        AC_MSG_ERROR([could not change to default builddir "./$SUB"])
-      fi
-      srcdir=`echo "$SUB" |
-              sed -e 's,^\./,,;s,[[^/]]$,&/,;s,[[^/]]*/,../,g;s,[[/]]$,,;'`
-      # going to restart from subdirectory location
-      test -f $srcdir/config.log   && mv $srcdir/config.log   .
-      test -f $srcdir/confdefs.h   && mv $srcdir/confdefs.h   .
-      test -f $srcdir/conftest.log && mv $srcdir/conftest.log .
-      test -f $srcdir/$cache_file  && mv $srcdir/$cache_file  .
-      AC_MSG_RESULT(....exec $SHELL $srcdir/[$]0 "--srcdir=$srcdir" "--enable-builddir=$SUB" ${1+"[$]@"})
-      case "[$]0" in # restart
-       [/\\]*) eval $SHELL "'[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
-       *) eval $SHELL "'$srcdir/[$]0'" "'--srcdir=$srcdir'" "'--enable-builddir=$SUB'" $ac_configure_args ;;
-      esac ; exit $?
-    fi
-  fi
-fi fi
-test ".$SUB" = ".auto" && SUB="."
-dnl ac_path_prog uses "set dummy" to override $@ which would defeat the "exec"
-AC_PATH_PROG(SED,gsed sed, sed)
-AUX="$am_aux_dir"
-AS_VAR_POPDEF([SED])dnl
-AS_VAR_POPDEF([AUX])dnl
-AS_VAR_POPDEF([SUB])dnl
-AC_CONFIG_COMMANDS([buildir],[dnl .............. config.status ..............
-AS_VAR_PUSHDEF([SUB],[ax_enable_builddir])dnl
-AS_VAR_PUSHDEF([TOP],[top_srcdir])dnl
-AS_VAR_PUSHDEF([SRC],[ac_top_srcdir])dnl
-AS_VAR_PUSHDEF([AUX],[ax_enable_builddir_auxdir])dnl
-AS_VAR_PUSHDEF([SED],[ax_enable_builddir_sed])dnl
-pushdef([END],[Makefile.mk])dnl
-pushdef([_ALL],[ifelse([$3],,[-all],[$3])])dnl
-  SRC="$ax_enable_builddir_srcdir"
-  if test ".$SUB" = ".." ; then
-    if test -f "$TOP/Makefile" ; then
-      AC_MSG_NOTICE([skipping TOP/Makefile - left untouched])
-    else
-      AC_MSG_NOTICE([skipping TOP/Makefile - not created])
-    fi
-  else
-    if test -f "$SRC/Makefile" ; then
-      a=`grep "^VERSION " "$SRC/Makefile"` ; b=`grep "^VERSION " Makefile`
-      test "$a" != "$b" && rm "$SRC/Makefile"
-    fi
-    if test -f "$SRC/Makefile" ; then
-	echo "$SRC/Makefile : $SRC/Makefile.in" > $tmp/conftemp.mk
-	echo "	[]@ echo 'REMOVED,,,' >\$[]@" >> $tmp/conftemp.mk
-      eval "${MAKE-make} -f $tmp/conftemp.mk 2>/dev/null >/dev/null"
-      if grep '^REMOVED,,,' "$SRC/Makefile" >/dev/null
-      then rm $SRC/Makefile ; fi
-      cp $tmp/conftemp.mk $SRC/makefiles.mk~      ## DEBUGGING
-    fi
-    if test ! -f "$SRC/Makefile" ; then
-      AC_MSG_NOTICE([create TOP/Makefile guessed from local Makefile])
-      x='`' ; cat >$tmp/conftemp.sed <<_EOF
-/^\$/n
-x
-/^\$/bS
-x
-/\\\\\$/{H;d;}
-{H;s/.*//;x;}
-bM
-:S
-x
-/\\\\\$/{h;d;}
-{h;s/.*//;x;}
-:M
-s/\\(\\n\\)	/\\1 /g
-/^	/d
-/^[[	 ]]*[[\\#]]/d
-/^VPATH *=/d
-s/^srcdir *=.*/srcdir = ./
-s/^top_srcdir *=.*/top_srcdir = ./
-/[[:=]]/!d
-/^\\./d
-dnl Now handle rules (i.e. lines containing ":" but not " = ").
-/ = /b
-/ .= /b
-/:/!b
-s/:.*/:/
-s/ /  /g
-s/ \\([[a-z]][[a-z-]]*[[a-zA-Z0-9]]\\)\\([[ :]]\\)/ \\1 \\1[]_ALL\\2/g
-s/^\\([[a-z]][[a-z-]]*[[a-zA-Z0-9]]\\)\\([[ :]]\\)/\\1 \\1[]_ALL\\2/
-s/  / /g
-/^all all[]_ALL[[ :]]/i\\
-all-configured : all[]_ALL
-dnl dist-all exists... and would make for dist-all-all
-s/ [[a-zA-Z0-9-]]*[]_ALL [[a-zA-Z0-9-]]*[]_ALL[]_ALL//g
-/[]_ALL[]_ALL/d
-a\\
-	@ HOST="\$(HOST)\" \\\\\\
-	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
-	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
-	; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
-	; echo "MAKE \$\$HOST : \$\$n * \$\@"; if test "\$\$n" = "0" ; then : \\\\\\
-	; BUILD=$x grep "^####.*|" Makefile |tail -1| sed -e 's/.*|//' $x ; fi \\\\\\
-	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
-	; test "\$\$use" = "\$\@" && BUILD=$x echo "\$\$BUILD" | tail -1 $x \\\\\\
-	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
-	; (cd "\$\$i" && test ! -f configure && \$(MAKE) \$\$use) || exit; done
-dnl special rule add-on: "dist" copies the tarball to $(PUB). (source tree)
-/dist[]_ALL *:/a\\
-	@ HOST="\$(HOST)\" \\\\\\
-	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
-	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
-	; found=$x echo \$\$BUILD | wc -w $x \\\\\\
-	; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).tar.*" \\\\\\
-	; if test "\$\$found" = "0" ; then : \\\\\\
-	; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
-	; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
-	; for f in \$\$i/\$(PACKAGE)-\$(VERSION).tar.* \\\\\\
-	; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
-dnl special rule add-on: "dist-foo" copies all the archives to $(PUB). (source tree)
-/dist-[[a-zA-Z0-9]]*[]_ALL *:/a\\
-	@ HOST="\$(HOST)\" \\\\\\
-	; test ".\$\$HOST" = "." && HOST=$x sh ./config.guess $x \\\\\\
-	; BUILD=$x grep "^#### \$\$HOST " Makefile | sed -e 's/.*|//' $x \\\\\\
-	; found=$x echo \$\$BUILD | wc -w $x \\\\\\
-	; echo "MAKE \$\$HOST : \$\$found \$(PACKAGE)-\$(VERSION).*" \\\\\\
-	; if test "\$\$found" = "0" ; then : \\\\\\
-	; BUILD=$x grep "^#### .*|" Makefile |tail -1| sed -e 's/.*|//' $x \\\\\\
-	; fi ; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
-	; for f in \$\$i/\$(PACKAGE)-\$(VERSION).* \\\\\\
-	; do test -f "\$\$f" && mv "\$\$f" \$(PUB). ; done ; break ; done
-dnl special rule add-on: "distclean" removes all local builddirs completely
-/distclean[]_ALL *:/a\\
-	@ HOST="\$(HOST)\" \\\\\\
-	; test ".\$\$HOST" = "." && HOST=$x sh $AUX/config.guess $x \\\\\\
-	; BUILD=$x grep "^#### .*|" Makefile | sed -e 's/.*|//' $x \\\\\\
-	; use=$x basename "\$\@" _ALL $x; n=$x echo \$\$BUILD | wc -w $x \\\\\\
-	; echo "MAKE \$\$HOST : \$\$n * \$\@ (all local builds)" \\\\\\
-	; test ".\$\$BUILD" = "." && BUILD="." \\\\\\
-	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
-	; echo "# rm -r \$\$i"; done ; echo "# (sleep 3)" ; sleep 3 \\\\\\
-	; for i in \$\$BUILD ; do test ".\$\$i" = "." && continue \\\\\\
-	; echo "\$\$i" | grep "^/" > /dev/null && continue \\\\\\
-	; echo "\$\$i" | grep "^../" > /dev/null && continue \\\\\\
-	; echo "rm -r \$\$i"; (rm -r "\$\$i") ; done ; rm Makefile
-_EOF
-      cp "$tmp/conftemp.sed" "$SRC/makefile.sed~"            ## DEBUGGING
-      $SED -f $tmp/conftemp.sed Makefile >$SRC/Makefile
-      if test -f "$SRC/m4_ifval([$2],[$2],[END])" ; then
-        AC_MSG_NOTICE([extend TOP/Makefile with TOP/m4_ifval([$2],[$2],[END])])
-        cat $SRC/END >>$SRC/Makefile
-      fi ; xxxx="####"
-      echo "$xxxx CONFIGURATIONS FOR TOPLEVEL MAKEFILE: " >>$SRC/Makefile
-      # sanity check
-      if grep '^; echo "MAKE ' $SRC/Makefile >/dev/null ; then
-        AC_MSG_NOTICE([buggy sed found - it deletes tab in "a" text parts])
-        $SED -e '/^@ HOST=/s/^/	/' -e '/^; /s/^/	/' $SRC/Makefile \
-          >$SRC/Makefile~
-        (test -s $SRC/Makefile~ && mv $SRC/Makefile~ $SRC/Makefile) 2>/dev/null
-      fi
-    else
-      xxxx="\\#\\#\\#\\#"
-      # echo "/^$xxxx *$ax_enable_builddir_host /d" >$tmp/conftemp.sed
-      echo "s!^$xxxx [[^|]]* | *$SUB *\$!$xxxx ...... $SUB!" >$tmp/conftemp.sed
-      $SED -f "$tmp/conftemp.sed" "$SRC/Makefile" >$tmp/mkfile.tmp
-        cp "$tmp/conftemp.sed" "$SRC/makefiles.sed~"         ## DEBUGGING
-        cp "$tmp/mkfile.tmp"   "$SRC/makefiles.out~"         ## DEBUGGING
-      if cmp -s "$SRC/Makefile" "$tmp/mkfile.tmp" 2>/dev/null ; then
-        AC_MSG_NOTICE([keeping TOP/Makefile from earlier configure])
-        rm "$tmp/mkfile.tmp"
-      else
-        AC_MSG_NOTICE([reusing TOP/Makefile from earlier configure])
-        mv "$tmp/mkfile.tmp" "$SRC/Makefile"
-      fi
-    fi
-    AC_MSG_NOTICE([build in $SUB (HOST=$ax_enable_builddir_host)])
-    xxxx="####"
-    echo "$xxxx" "$ax_enable_builddir_host" "|$SUB" >>$SRC/Makefile
-  fi
-popdef([END])dnl
-AS_VAR_POPDEF([SED])dnl
-AS_VAR_POPDEF([AUX])dnl
-AS_VAR_POPDEF([SRC])dnl
-AS_VAR_POPDEF([TOP])dnl
-AS_VAR_POPDEF([SUB])dnl
-],[dnl
-ax_enable_builddir_srcdir="$srcdir"                    # $srcdir
-ax_enable_builddir_host="$HOST"                        # $HOST / $host
-ax_enable_builddir_version="$VERSION"                  # $VERSION
-ax_enable_builddir_package="$PACKAGE"                  # $PACKAGE
-ax_enable_builddir_auxdir="$ax_enable_builddir_auxdir" # $AUX
-ax_enable_builddir_sed="$ax_enable_builddir_sed"       # $SED
-ax_enable_builddir="$ax_enable_builddir"               # $SUB
-])dnl
-])

data/demo/templates/vendor/bundle/ruby/1.9.1/gems/ffi-1.8.1/ext/ffi_c/libffi/m4/ax_gcc_archflag.m4

@@ -1,215 +0,0 @@
-# ===========================================================================
-#      http://www.gnu.org/software/autoconf-archive/ax_gcc_archflag.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_GCC_ARCHFLAG([PORTABLE?], [ACTION-SUCCESS], [ACTION-FAILURE])
-#
-# DESCRIPTION
-#
-#   This macro tries to guess the "native" arch corresponding to the target
-#   architecture for use with gcc's -march=arch or -mtune=arch flags. If
-#   found, the cache variable $ax_cv_gcc_archflag is set to this flag and
-#   ACTION-SUCCESS is executed; otherwise $ax_cv_gcc_archflag is is set to
-#   "unknown" and ACTION-FAILURE is executed. The default ACTION-SUCCESS is
-#   to add $ax_cv_gcc_archflag to the end of $CFLAGS.
-#
-#   PORTABLE? should be either [yes] (default) or [no]. In the former case,
-#   the flag is set to -mtune (or equivalent) so that the architecture is
-#   only used for tuning, but the instruction set used is still portable. In
-#   the latter case, the flag is set to -march (or equivalent) so that
-#   architecture-specific instructions are enabled.
-#
-#   The user can specify --with-gcc-arch=<arch> in order to override the
-#   macro's choice of architecture, or --without-gcc-arch to disable this.
-#
-#   When cross-compiling, or if $CC is not gcc, then ACTION-FAILURE is
-#   called unless the user specified --with-gcc-arch manually.
-#
-#   Requires macros: AX_CHECK_COMPILER_FLAGS, AX_GCC_X86_CPUID
-#
-#   (The main emphasis here is on recent CPUs, on the principle that doing
-#   high-performance computing on old hardware is uncommon.)
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
-#   Copyright (c) 2008 Matteo Frigo
-#
-#   This program is free software: you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation, either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 8
-
-AC_DEFUN([AX_GCC_ARCHFLAG],
-[AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AC_CANONICAL_HOST])
-
-AC_ARG_WITH(gcc-arch, [AS_HELP_STRING([--with-gcc-arch=<arch>], [use architecture <arch> for gcc -march/-mtune, instead of guessing])],
-	ax_gcc_arch=$withval, ax_gcc_arch=yes)
-
-AC_MSG_CHECKING([for gcc architecture flag])
-AC_MSG_RESULT([])
-AC_CACHE_VAL(ax_cv_gcc_archflag,
-[
-ax_cv_gcc_archflag="unknown"
-
-if test "$GCC" = yes; then
-
-if test "x$ax_gcc_arch" = xyes; then
-ax_gcc_arch=""
-if test "$cross_compiling" = no; then
-case $host_cpu in
-  i[[3456]]86*|x86_64*) # use cpuid codes, in part from x86info-1.7 by D. Jones
-     AX_GCC_X86_CPUID(0)
-     AX_GCC_X86_CPUID(1)
-     case $ax_cv_gcc_x86_cpuid_0 in
-       *:756e6547:*:*) # Intel
-          case $ax_cv_gcc_x86_cpuid_1 in
-	    *5[[48]]?:*:*:*) ax_gcc_arch="pentium-mmx pentium" ;;
-	    *5??:*:*:*) ax_gcc_arch=pentium ;;
-	    *6[[3456]]?:*:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
-	    *6a?:*[[01]]:*:*) ax_gcc_arch="pentium2 pentiumpro" ;;
-	    *6a?:*[[234]]:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
-	    *6[[9d]]?:*:*:*) ax_gcc_arch="pentium-m pentium3 pentiumpro" ;;
-	    *6[[78b]]?:*:*:*) ax_gcc_arch="pentium3 pentiumpro" ;;
-	    *6??:*:*:*) ax_gcc_arch=pentiumpro ;;
-            *f3[[347]]:*:*:*|*f4[1347]:*:*:*)
-		case $host_cpu in
-                  x86_64*) ax_gcc_arch="nocona pentium4 pentiumpro" ;;
-                  *) ax_gcc_arch="prescott pentium4 pentiumpro" ;;
-                esac ;;
-            *f??:*:*:*) ax_gcc_arch="pentium4 pentiumpro";;
-          esac ;;
-       *:68747541:*:*) # AMD
-          case $ax_cv_gcc_x86_cpuid_1 in
-	    *5[[67]]?:*:*:*) ax_gcc_arch=k6 ;;
-	    *5[[8d]]?:*:*:*) ax_gcc_arch="k6-2 k6" ;;
-	    *5[[9]]?:*:*:*) ax_gcc_arch="k6-3 k6" ;;
-	    *60?:*:*:*) ax_gcc_arch=k7 ;;
-	    *6[[12]]?:*:*:*) ax_gcc_arch="athlon k7" ;;
-	    *6[[34]]?:*:*:*) ax_gcc_arch="athlon-tbird k7" ;;
-	    *67?:*:*:*) ax_gcc_arch="athlon-4 athlon k7" ;;
-	    *6[[68a]]?:*:*:*)
-	       AX_GCC_X86_CPUID(0x80000006) # L2 cache size
-	       case $ax_cv_gcc_x86_cpuid_0x80000006 in
-                 *:*:*[[1-9a-f]]??????:*) # (L2 = ecx >> 16) >= 256
-			ax_gcc_arch="athlon-xp athlon-4 athlon k7" ;;
-                 *) ax_gcc_arch="athlon-4 athlon k7" ;;
-	       esac ;;
-	    *f[[4cef8b]]?:*:*:*) ax_gcc_arch="athlon64 k8" ;;
-	    *f5?:*:*:*) ax_gcc_arch="opteron k8" ;;
-	    *f7?:*:*:*) ax_gcc_arch="athlon-fx opteron k8" ;;
-	    *f??:*:*:*) ax_gcc_arch="k8" ;;
-          esac ;;
-	*:746e6543:*:*) # IDT
-	   case $ax_cv_gcc_x86_cpuid_1 in
-	     *54?:*:*:*) ax_gcc_arch=winchip-c6 ;;
-	     *58?:*:*:*) ax_gcc_arch=winchip2 ;;
-	     *6[[78]]?:*:*:*) ax_gcc_arch=c3 ;;
-	     *69?:*:*:*) ax_gcc_arch="c3-2 c3" ;;
-	   esac ;;
-     esac
-     if test x"$ax_gcc_arch" = x; then # fallback
-	case $host_cpu in
-	  i586*) ax_gcc_arch=pentium ;;
-	  i686*) ax_gcc_arch=pentiumpro ;;
-        esac
-     fi
-     ;;
-
-  sparc*)
-     AC_PATH_PROG([PRTDIAG], [prtdiag], [prtdiag], [$PATH:/usr/platform/`uname -i`/sbin/:/usr/platform/`uname -m`/sbin/])
-     cputype=`(((grep cpu /proc/cpuinfo | cut -d: -f2) ; ($PRTDIAG -v |grep -i sparc) ; grep -i cpu /var/run/dmesg.boot ) | head -n 1) 2> /dev/null`
-     cputype=`echo "$cputype" | tr -d ' -' |tr $as_cr_LETTERS $as_cr_letters`
-     case $cputype in
-         *ultrasparciv*) ax_gcc_arch="ultrasparc4 ultrasparc3 ultrasparc v9" ;;
-         *ultrasparciii*) ax_gcc_arch="ultrasparc3 ultrasparc v9" ;;
-         *ultrasparc*) ax_gcc_arch="ultrasparc v9" ;;
-         *supersparc*|*tms390z5[[05]]*) ax_gcc_arch="supersparc v8" ;;
-         *hypersparc*|*rt62[[056]]*) ax_gcc_arch="hypersparc v8" ;;
-         *cypress*) ax_gcc_arch=cypress ;;
-     esac ;;
-
-  alphaev5) ax_gcc_arch=ev5 ;;
-  alphaev56) ax_gcc_arch=ev56 ;;
-  alphapca56) ax_gcc_arch="pca56 ev56" ;;
-  alphapca57) ax_gcc_arch="pca57 pca56 ev56" ;;
-  alphaev6) ax_gcc_arch=ev6 ;;
-  alphaev67) ax_gcc_arch=ev67 ;;
-  alphaev68) ax_gcc_arch="ev68 ev67" ;;
-  alphaev69) ax_gcc_arch="ev69 ev68 ev67" ;;
-  alphaev7) ax_gcc_arch="ev7 ev69 ev68 ev67" ;;
-  alphaev79) ax_gcc_arch="ev79 ev7 ev69 ev68 ev67" ;;
-
-  powerpc*)
-     cputype=`((grep cpu /proc/cpuinfo | head -n 1 | cut -d: -f2 | cut -d, -f1 | sed 's/ //g') ; /usr/bin/machine ; /bin/machine; grep CPU /var/run/dmesg.boot | head -n 1 | cut -d" " -f2) 2> /dev/null`
-     cputype=`echo $cputype | sed -e 's/ppc//g;s/ *//g'`
-     case $cputype in
-       *750*) ax_gcc_arch="750 G3" ;;
-       *740[[0-9]]*) ax_gcc_arch="$cputype 7400 G4" ;;
-       *74[[4-5]][[0-9]]*) ax_gcc_arch="$cputype 7450 G4" ;;
-       *74[[0-9]][[0-9]]*) ax_gcc_arch="$cputype G4" ;;
-       *970*) ax_gcc_arch="970 G5 power4";;
-       *POWER4*|*power4*|*gq*) ax_gcc_arch="power4 970";;
-       *POWER5*|*power5*|*gr*|*gs*) ax_gcc_arch="power5 power4 970";;
-       603ev|8240) ax_gcc_arch="$cputype 603e 603";;
-       *) ax_gcc_arch=$cputype ;;
-     esac
-     ax_gcc_arch="$ax_gcc_arch powerpc"
-     ;;
-esac
-fi # not cross-compiling
-fi # guess arch
-
-if test "x$ax_gcc_arch" != x -a "x$ax_gcc_arch" != xno; then
-for arch in $ax_gcc_arch; do
-  if test "x[]m4_default([$1],yes)" = xyes; then # if we require portable code
-    flags="-mtune=$arch"
-    # -mcpu=$arch and m$arch generate nonportable code on every arch except
-    # x86.  And some other arches (e.g. Alpha) don't accept -mtune.  Grrr.
-    case $host_cpu in i*86|x86_64*) flags="$flags -mcpu=$arch -m$arch";; esac
-  else
-    flags="-march=$arch -mcpu=$arch -m$arch"
-  fi
-  for flag in $flags; do
-    AX_CHECK_COMPILER_FLAGS($flag, [ax_cv_gcc_archflag=$flag; break])
-  done
-  test "x$ax_cv_gcc_archflag" = xunknown || break
-done
-fi
-
-fi # $GCC=yes
-])
-AC_MSG_CHECKING([for gcc architecture flag])
-AC_MSG_RESULT($ax_cv_gcc_archflag)
-if test "x$ax_cv_gcc_archflag" = xunknown; then
-  m4_default([$3],:)
-else
-  m4_default([$2], [CFLAGS="$CFLAGS $ax_cv_gcc_archflag"])
-fi
-])

data/demo/templates/vendor/bundle/ruby/1.9.1/gems/ffi-1.8.1/ext/ffi_c/libffi/m4/ax_gcc_x86_cpuid.m4

@@ -1,79 +0,0 @@
-# ===========================================================================
-#     http://www.gnu.org/software/autoconf-archive/ax_gcc_x86_cpuid.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_GCC_X86_CPUID(OP)
-#
-# DESCRIPTION
-#
-#   On Pentium and later x86 processors, with gcc or a compiler that has a
-#   compatible syntax for inline assembly instructions, run a small program
-#   that executes the cpuid instruction with input OP. This can be used to
-#   detect the CPU type.
-#
-#   On output, the values of the eax, ebx, ecx, and edx registers are stored
-#   as hexadecimal strings as "eax:ebx:ecx:edx" in the cache variable
-#   ax_cv_gcc_x86_cpuid_OP.
-#
-#   If the cpuid instruction fails (because you are running a
-#   cross-compiler, or because you are not using gcc, or because you are on
-#   a processor that doesn't have this instruction), ax_cv_gcc_x86_cpuid_OP
-#   is set to the string "unknown".
-#
-#   This macro mainly exists to be used in AX_GCC_ARCHFLAG.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Steven G. Johnson <stevenj@alum.mit.edu>
-#   Copyright (c) 2008 Matteo Frigo
-#
-#   This program is free software: you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation, either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 7
-
-AC_DEFUN([AX_GCC_X86_CPUID],
-[AC_REQUIRE([AC_PROG_CC])
-AC_LANG_PUSH([C])
-AC_CACHE_CHECK(for x86 cpuid $1 output, ax_cv_gcc_x86_cpuid_$1,
- [AC_RUN_IFELSE([AC_LANG_PROGRAM([#include <stdio.h>], [
-     int op = $1, eax, ebx, ecx, edx;
-     FILE *f;
-      __asm__("cpuid"
-        : "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
-        : "a" (op));
-     f = fopen("conftest_cpuid", "w"); if (!f) return 1;
-     fprintf(f, "%x:%x:%x:%x\n", eax, ebx, ecx, edx);
-     fclose(f);
-     return 0;
-])],
-     [ax_cv_gcc_x86_cpuid_$1=`cat conftest_cpuid`; rm -f conftest_cpuid],
-     [ax_cv_gcc_x86_cpuid_$1=unknown; rm -f conftest_cpuid],
-     [ax_cv_gcc_x86_cpuid_$1=unknown])])
-AC_LANG_POP([C])
-])