vagrant-aws-mkubenka 0.7.2.pre.14 → 0.7.2.pre.16

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-5333e60e2d38/templates/locales/en.yml

@@ -1,2381 +0,0 @@
-en:
-  vagrant:
-    boot_completed: |-
-      Machine booted and ready!
-    boot_waiting: |-
-      Waiting for machine to boot. This may take a few minutes...
-    box_auto_adding: |-
-      Box '%{name}' could not be found. Attempting to find and install...
-    box_add_choose_provider: |-
-      This box can work with multiple providers! The providers that it
-      can work with are listed below. Please review the list and choose
-      the provider you will be working with.
-
-      %{options}
-
-      Enter your choice:
-    box_add_choose_provider_again: |-
-      Invalid choice. Try again:
-    box_add_with_version: |-
-      Adding box '%{name}' (v%{version}) for provider: %{providers}
-    box_added: |-
-      Successfully added box '%{name}' (v%{version}) for '%{provider}'!
-    box_adding_direct: |-
-      Box file was not detected as metadata. Adding it directly...
-    box_add_url_warn: |-
-      It looks like you attempted to add a box with a URL for the name...
-      Instead, use box_url instead of box for box URLs.
-    box_downloading: |-
-      Downloading: %{url}
-    box_download_error: |-
-      Error downloading: %{message}
-    box_unpacking: |-
-      Unpacking necessary files from: %{url}
-    box_expanding_url: |-
-      URL: %{url}
-    box_loading_metadata: |-
-      Loading metadata for box '%{name}'
-    box_outdated: |-
-      * '%{name}' is outdated! Current: %{current}. Latest: %{latest}
-    box_outdated_checking_with_refresh: |-
-      Checking if box '%{name}' is up to date...
-    box_outdated_local: |-
-      A newer version of the box '%{name}' is available and already
-      installed, but your Vagrant machine is running against
-      version '%{old}'. To update to version '%{new}',
-      destroy and recreate your machine.
-    box_outdated_metadata_download_error: |-
-      There was a problem while downloading the metadata for your box
-      to check for updates. This is not an error, since it is usually due
-      to temporary network problems. This is just a warning. The problem
-      encountered was:
-
-      %{message}
-
-      If you want to check for box updates, verify your network connection
-      is valid and try again.
-    box_outdated_metadata_error_single: |-
-      Error loading box metadata while attempting to check for
-      updates: %{message}
-    box_outdated_single: |-
-      A newer version of the box '%{name}' is available! You currently
-      have version '%{current}'. The latest is version '%{latest}'. Run
-      `vagrant box update` to update.
-    box_outdated_metadata_error: |-
-      * '%{name}': Error loading metadata: %{message}
-    box_outdated_no_metadata: |-
-      * '%{name}' wasn't added from a catalog, no version information
-    box_updating: |-
-      Updating '%{name}' with provider '%{provider}' from version
-      '%{old}' to '%{new}'...
-    box_update_checking: |-
-      Checking for updates to '%{name}'
-    box_up_to_date: |-
-      * '%{name}' (v%{version}) is up to date
-    box_up_to_date_single: |-
-      Box '%{name}' (v%{version}) is running the latest version.
-    cfengine_bootstrapping: |-
-      Bootstrapping CFEngine with policy server: %{policy_server}...
-    cfengine_bootstrapping_policy_hub: |-
-      Performing additional bootstrap for policy hubs...
-    cfengine_cant_detect: |-
-      Vagrant doesn't support detecting whether CFEngine is installed
-      for the guest OS running in the machine. Vagrant will assume it is
-      installed and attempt to continue.
-    cfengine_detected_ip: |-
-      Detected policy server IP address: %{address}...
-    cfengine_installing: |-
-      Installing CFEngine onto machine...
-    cfengine_installing_files_path: |-
-      Copying the 'files_path' files...
-    cfengine_no_bootstrap: |-
-      CFEngine doesn't require bootstrap. Not bootstrapping.
-    cfengine_single_run: |-
-      CFEngine running in "single run" mode. Will execute one file.
-    cfengine_single_run_execute: |-
-      Executing run file for CFEngine...
-    chef_cant_detect: |-
-      Vagrant does not support detecting whether Chef is installed
-      for the guest OS running in the machine. Vagrant will assume it is
-      installed and attempt to continue.
-    chef_already_installed: |-
-      Detected Chef (%{version}) is already installed
-    chef_installing: |-
-      Installing Chef (%{version})...
-    chef_client_cleanup_failed: |-
-      Cleaning up the '%{deletable}' for Chef failed. The stdout and
-      stderr are shown below. Vagrant will continue destroying the machine,
-      so please clean up these resources manually.
-
-      stdout: %{stdout}
-
-      stderr: %{stderr}
-    chef_config_knife_not_found: |-
-      The `knife` application was not found! This is required by Vagrant
-      to automatically delete Chef nodes and clients.
-    chef_run_list_empty: |-
-      Warning: Chef run list is empty. This may not be what you want.
-    cli_interrupt: |-
-      Exiting due to interrupt.
-    docker_auto_start_not_available: |-
-      Unable to configure automatic restart of Docker containers on
-      the guest machine
-    docker_cant_detect: |-
-      Vagrant doesn't support detecting whether Docker is installed
-      for the guest OS running in the machine. Vagrant will assume it is
-      installed and attempt to continue.
-    docker_configure_autostart: |-
-      Configuring Docker to autostart containers...
-    docker_installing: |-
-      Installing Docker onto machine...
-    docker_pulling_images:
-      Pulling Docker images...
-    docker_pulling_single: |-
-      -- Image: %{name}
-    docker_building_single: |-
-      -- Path: %{path}
-    docker_building_images:
-      Building Docker images...
-    docker_running: |-
-      -- Container: %{name}
-    docker_restarting_container_args: |-
-      -- Detected changes to container '%{name}' args, restarting...
-    docker_restarting_container_image: |-
-      -- Detected newer image for container '%{name}', restarting...
-    docker_starting_containers: |-
-      Starting Docker containers...
-    inserted_key: |-
-      Key inserted! Disconnecting and reconnecting using new SSH key...
-    inserting_insecure_detected: |-
-      Vagrant insecure key detected. Vagrant will automatically replace
-      this with a newly generated keypair for better security.
-    inserting_random_key: |-
-      Inserting generated public key within guest...
-    inserting_remove_key: |-
-      Removing insecure key from the guest if it's present...
-    installing_provider: |-
-      Provider '%{provider}' not found. We'll automatically install it now...
-    installing_provider_detail: |-
-      The installation process will start below. Human interaction may be
-      required at some points. If you're uncomfortable with automatically
-      installing this provider, you can safely Ctrl-C this process and install
-      it manually.
-    list_commands: |-
-      Below is a listing of all available Vagrant commands and a brief
-      description of what they do.
-
-      %{list}
-    moved_cwd: |-
-      This machine used to live in %{old_wd} but it's now at %{current_wd}.
-      Please change the name of the machine if you want to run it as a different
-      machine.
-    guest_deb_installing_smb: |-
-      Installing SMB "mount.cifs"...
-    global_status_footer: |-
-      The above shows information about all known Vagrant environments
-      on this machine. This data is cached and may not be completely
-      up-to-date. To interact with any of the machines, you can go to
-      that directory and run Vagrant, or you can use the ID directly
-      with Vagrant commands from any directory. For example:
-      "vagrant destroy 1a2b3c4d"
-    global_status_none: |-
-      There are no active Vagrant environments on this computer! Or,
-      you haven't destroyed and recreated Vagrant environments that were
-      started with an older version of Vagrant.
-    plugin_needs_reinstall: |-
-      The following plugins were installed with a version of Vagrant
-      that had different versions of underlying components. Because
-      these component versions were changed (which rarely happens),
-      the plugins must be uninstalled and reinstalled.
-
-      To ensure that all the dependencies are properly updated as well
-      it is _highly recommended_ to do a `vagrant plugin uninstall`
-      prior to reinstalling.
-
-      This message will not go away until all the plugins below are
-      either uninstalled or uninstalled then reinstalled.
-
-      The plugins below will not be loaded until they're uninstalled
-      and reinstalled:
-
-      %{names}
-    post_up_message: |-
-      Machine '%{name}' has a post `vagrant up` message. This is a message
-      from the creator of the Vagrantfile, and not from Vagrant itself:
-
-      %{message}
-    provisioner_cleanup: |-
-      Running cleanup tasks for '%{name}' provisioner...
-    rsync_auto_initial: |-
-      Doing an initial rsync...
-    rsync_auto_new_folders: |-
-      New synced folders were added to the Vagrantfile since running
-      `vagrant reload`. If these new synced folders are backed by rsync,
-      they won't be automatically synced until a `vagrant reload` is run.
-    rsync_auto_no_paths: |-
-      There are no paths to watch! This is either because you have no
-      synced folders using rsync, or any rsync synced folders you have
-      have specified `rsync_auto` to be false.
-    rsync_auto_path: |-
-      Watching: %{path}
-    rsync_auto_rsync_error: |-
-      There was an error while executing rsync. The error is shown below.
-      This may not be critical since rsync sometimes fails, but if this message
-      repeats, then please fix the issue:
-
-      %{message}
-    rsync_communicator_not_ready: |-
-      The machine is reporting that it is not ready for rsync to
-      communicate with it. Verify that this machine is properly running.
-    rsync_communicator_not_ready_callback: |-
-      Failed to connect to remote machine. This is usually caused by the
-      machine rebooting or being halted. Please make sure the machine is
-      running, and modify a file to try again.
-    rsync_folder: |-
-      Rsyncing folder: %{hostpath} => %{guestpath}
-    rsync_folder_excludes: "  - Exclude: %{excludes}"
-    rsync_installing: "Installing rsync to the VM..."
-    rsync_proxy_machine: |-
-      The provider ('%{provider}') for the machine '%{name}' is
-      using a proxy machine. RSync will sync to this proxy
-      instead of directly to the environment itself.
-    rsync_showing_output: "Showing rsync output..."
-    rsync_ssh_password: |-
-      The machine you're rsyncing folders to is configured to use
-      password-based authentication. Vagrant can't script rsync to automatically
-      enter this password, so you'll likely be prompted for a password
-      shortly.
-
-      If you don't want to have to do this, please enable automatic
-      key insertion using `config.ssh.insert_key`.
-    ssh_exec_password: |-
-      The machine you're attempting to SSH into is configured to use
-      password-based authentication. Vagrant can't script entering the
-      password for you. If you're prompted for a password, please enter
-      the same password you have configured in the Vagrantfile.
-    stdin_cant_hide_input: |-
-      Error! Your console doesn't support hiding input. We'll ask for
-      input again below, but we WILL NOT be able to hide input. If this
-      is a problem for you, ctrl-C to exit and fix your stdin.
-    up_no_machines: |-
-      No machines to bring up. This is usually because all machines are
-      set to `autostart: false`, which means you have to explicitly specify
-      the name of the machine to bring up.
-    upgrading_home_path_v1_5: |-
-      Vagrant is upgrading some internal state for the latest version.
-      Please do not quit Vagrant at this time. While upgrading, Vagrant
-      will need to copy all your boxes, so it will use a considerable
-      amount of disk space. After it is done upgrading, the temporary disk
-      space will be freed.
-
-      Press ctrl-c now to exit if you want to remove some boxes or free
-      up some disk space.
-
-      Press the Enter or Return key to continue.
-    version_current: |-
-      Installed Version: %{version}
-    version_latest: |-
-      Latest Version: %{version}
-    version_latest_installed: |-
-      You're running an up-to-date version of Vagrant!
-    version_no_checkpoint: |-
-      Vagrant was unable to check for the latest version of Vagrant.
-      Please check manually at https://www.vagrantup.com
-    version_upgrade_howto: |-
-      To upgrade to the latest version, visit the downloads page and
-      download and install the latest version of Vagrant from the URL
-      below:
-
-        https://www.vagrantup.com/downloads.html
-
-      If you're curious what changed in the latest release, view the
-      CHANGELOG below:
-
-        https://github.com/mitchellh/vagrant/blob/v%{version}/CHANGELOG.md
-
-    cfengine_config:
-      classes_array: |-
-        The 'classes' configuration must be an array.
-      files_path_not_directory: |-
-        The 'files_path' must point to a valid directory.
-      invalid_mode: |-
-        The mode must be 'bootstrap' or 'single_run'
-      policy_server_address: |-
-        The policy server address must be set for bootstrapping.
-      run_file_not_found: |-
-        The 'run_file' specified could not be found.
-
-    virtualbox:
-      checking_guest_additions: |-
-        Checking for guest additions in VM...
-      network_adapter: |-
-        Adapter %{adapter}: %{type}%{extra}
-      config:
-        id_in_pre_import: |-
-          The ':id' parameter is not available in "pre-import" customizations.
-        intnet_on_bad_type: |-
-          VirtualBox internal networks can only be enabled on "private_network"
-        invalid_event: |-
-          %{event} is not a valid event for customization. Valid events
-          are: %{valid_events}
-
-    general:
-      batch_notify_error: |-
-        An error occurred. The error will be shown after all tasks complete.
-      batch_unexpected_error: |-
-        An unexpected error occurred when executing the action on the
-        '%{machine}' machine. Please report this as a bug:
-
-        %{message}
-      batch_vagrant_error: |-
-        An error occurred while executing the action on the '%{machine}'
-        machine. Please handle this error then try again:
-
-        %{message}
-      config_upgrade_messages: |-
-        There were warnings and/or errors while loading your Vagrantfile
-        for the machine '%{name}'.
-
-        Your Vagrantfile was written for an earlier version of Vagrant,
-        and while Vagrant does the best it can to remain backwards
-        compatible, there are some cases where things have changed
-        significantly enough to warrant a message. These messages are
-        shown below.
-
-        %{output}
-      not_in_installer: |-
-        You appear to be running Vagrant outside of the official installers.
-        Note that the installers are what ensure that Vagrant has all required
-        dependencies, and Vagrant assumes that these dependencies exist. By
-        running outside of the installer environment, Vagrant may not function
-        properly. To remove this warning, install Vagrant using one of the
-        official packages from vagrantup.com.
-      upgraded_v1_dotfile: |-
-        A Vagrant 1.0.x state file was found for this environment. Vagrant has
-        gone ahead and auto-upgraded this to the latest format. Everything
-        should continue working as normal. Beware, however, that older versions
-        of Vagrant may no longer be used with this environment.
-
-        However, in case anything went wrong, the old dotfile was backed up
-        to the location below. If everything is okay, it is safe to remove
-        this backup.
-
-        Backup: %{backup_path}
-
-#-------------------------------------------------------------------------------
-# Translations for exception classes
-#-------------------------------------------------------------------------------
-    errors:
-      active_machine_with_different_provider: |-
-        An active machine was found with a different provider. Vagrant
-        currently allows each machine to be brought up with only a single
-        provider at a time. A future version will remove this limitation.
-        Until then, please destroy the existing machine to up with a new
-        provider.
-
-        Machine name: %{name}
-        Active provider: %{active_provider}
-        Requested provider: %{requested_provider}
-      batch_multi_error: |-
-        An error occurred while executing multiple actions in parallel.
-        Any errors that occurred are shown below.
-
-        %{message}
-      box_add_no_matching_provider: |-
-        The box you're attempting to add doesn't support the provider
-        you requested. Please find an alternate box or use an alternate
-        provider. Double-check your requested provider to verify you didn't
-        simply misspell it.
-
-        If you're adding a box from HashiCorp's Atlas, make sure the box is
-        released.
-
-        Name: %{name}
-        Address: %{url}
-        Requested provider: %{requested}
-      box_add_no_matching_version: |-
-        The box you're attempting to add has no available version that
-        matches the constraints you requested. Please double-check your
-        settings. Also verify that if you specified version constraints,
-        that the provider you wish to use is available for these constraints.
-
-        Box: %{name}
-        Address: %{url}
-        Constraints: %{constraints}
-        Available versions: %{versions}
-      box_add_short_not_found: |-
-        The box '%{name}' could not be found or
-        could not be accessed in the remote catalog. If this is a private
-        box on HashiCorp's Atlas, please verify you're logged in via
-        `vagrant login`. Also, please double-check the name. The expanded
-        URL and error message are shown below:
-
-        URL: %{url}
-        Error: %{error}
-      boot_bad_state: |-
-        The guest machine entered an invalid state while waiting for it
-        to boot. Valid states are '%{valid}'. The machine is in the
-        '%{invalid}' state. Please verify everything is configured
-        properly and try again.
-
-        If the provider you're using has a GUI that comes with it,
-        it is often helpful to open that and watch the machine, since the
-        GUI often has more helpful error messages than Vagrant can retrieve.
-        For example, if you're using VirtualBox, run `vagrant up` while the
-        VirtualBox GUI is open.
-
-        The primary issue for this error is that the provider you're using
-        is not properly configured. This is very rarely a Vagrant issue.
-      boot_timeout: |-
-        Timed out while waiting for the machine to boot. This means that
-        Vagrant was unable to communicate with the guest machine within
-        the configured ("config.vm.boot_timeout" value) time period.
-
-        If you look above, you should be able to see the error(s) that
-        Vagrant had when attempting to connect to the machine. These errors
-        are usually good hints as to what may be wrong.
-
-        If you're using a custom box, make sure that networking is properly
-        working and you're able to connect to the machine. It is a common
-        problem that networking isn't setup properly in these boxes.
-        Verify that authentication configurations are also setup properly,
-        as well.
-
-        If the box appears to be booting properly, you may want to increase
-        the timeout ("config.vm.boot_timeout") value.
-      box_add_exists: |-
-        The box you're attempting to add already exists. Remove it before
-        adding it again or add it with the `--force` flag.
-
-        Name: %{name}
-        Provider: %{provider}
-        Version: %{version}
-      box_add_direct_version: |-
-        You specified a box version constraint with a direct box file
-        path. Box version constraints only work with boxes from Vagrant
-        Cloud or a custom box host. Please remove the version constraint
-        and try again.
-      box_add_metadata_multi_url: |-
-        Multiple URLs for a box can't be specified when adding
-        versioned boxes. Please specify a single URL to the box
-        metadata (JSON) information. The full list of URLs you
-        specified is shown below:
-
-        %{urls}
-      box_add_name_mismatch: |-
-        The box you're adding has a name different from the name you
-        requested. For boxes with metadata, you cannot override the name.
-        If you're adding a box using `vagrant box add`, don't specify
-        the `--name` parameter. If the box is being added via a Vagrantfile,
-        change the `config.vm.box` value to match the name below.
-
-        Requested name: %{requested_name}
-        Actual name: %{actual_name}
-      box_add_name_required: |-
-        A name is required when adding a box file directly. Please pass
-        the `--name` parameter to `vagrant box add`. See
-        `vagrant box add -h` for more help.
-      box_checksum_invalid_type: |-
-        The specified checksum type is not supported by Vagrant: %{type}.
-        Vagrant supports the following checksum types:
-
-        md5, sha1, sha256
-      box_checksum_mismatch: |-
-        The checksum of the downloaded box did not match the expected
-        value. Please verify that you have the proper URL setup and that
-        you're downloading the proper file.
-
-        Expected: %{expected}
-        Received: %{actual}
-      box_config_changing_box: |-
-        While loading the Vagrantfile, the provider override specified
-        a new box. This box, in turn, specified a different box. This isn't
-        allowed, as it could lead to infinite recursion of Vagrant configuration
-        loading. Please fix this.
-      box_metadata_corrupted: |-
-        The metadata associated with the box '%{name}' appears corrupted.
-        This is most often caused by a disk issue or system crash. Please
-        remove the box, re-add it, and try again.
-      box_metadata_download_error: |-
-        There was an error while downloading the metadata for this box.
-        The error message is shown below:
-
-        %{message}
-      box_metadata_file_not_found: |-
-        The "metadata.json" file for the box '%{name}' was not found.
-        Boxes require this file in order for Vagrant to determine the
-        provider it was made for. If you made the box, please add a
-        "metadata.json" file to it. If someone else made the box, please
-        notify the box creator that the box is corrupt. Documentation for
-        box file format can be found at the URL below:
-
-        https://www.vagrantup.com/docs/boxes/format.html
-      box_metadata_malformed: |-
-        The metadata for the box was malformed. The exact error
-        is shown below. Please contact the maintainer of the box so
-        that this issue can be fixed.
-
-        %{error}
-      box_metadata_malformed_version: |-
-        A version of the box you're loading is formatted in a way that
-        Vagrant cannot parse: '%{version}'. Please reformat the version
-        to be properly formatted. It should be in the format of
-        X.Y.Z.
-      box_not_found: |-
-        The box '%{name}' does not exist. Please double check and
-        try again. You can see the boxes that are installed with
-        `vagrant box list`.
-      box_not_found_with_provider: |-
-        The box '%{name}' isn't installed for the provider '%{provider}'.
-        Please double-check and try again. The installed providers for
-        the box are shown below:
-
-        %{providers}
-      box_not_found_with_provider_and_version: |-
-        The box '%{name}' (v%{version}) with provider '%{provider}'
-        could not be found. Please double check and try again. You
-        can see all the boxes that are installed with `vagrant box list`.
-      box_provider_doesnt_match: |-
-        The box you attempted to add doesn't match the provider you specified.
-
-        Provider expected: %{expected}
-        Provider of box: %{actual}
-      box_remove_multi_provider: |-
-        You requested to remove the box '%{name}'. This box has
-        multiple providers. You must explicitly select a single
-        provider to remove with `--provider`.
-
-        Available providers: %{providers}
-      box_remove_multi_version: |-
-        You requested to remove the box '%{name}' with provider
-        '%{provider}'. This box has multiple versions. You must
-        explicitly specify which version you want to remove with
-        the `--box-version` flag or specify the `--all` flag to remove all
-        versions. The available versions for this box are:
-
-        %{versions}
-      box_remove_not_found: |-
-        The box you requested to be removed could not be found. No
-        boxes named '%{name}' could be found.
-      box_remove_provider_not_found: |-
-        You requested to remove the box '%{name}' with provider
-        '%{provider}'. The box '%{name}' exists but not with
-        the provider specified. Please double-check and try again.
-
-        The providers for this are: %{providers}
-      box_remove_version_not_found: |-
-        You requested to remove the box '%{name}' version '%{version}' with
-        provider '%{provider}', but that specific version of the box is
-        not installed. Please double-check and try again. The available versions
-        for this box are:
-
-        %{versions}
-      box_server_not_set: |-
-        A URL to an Atlas server is not set, so boxes cannot be added with a
-        shorthand ("mitchellh/precise64") format. You may also be seeing this
-        error if you meant to type in a path to a box file which doesn't exist
-        locally on your system.
-
-        To set a URL to an Atlas server, set the `VAGRANT_SERVER_URL`
-        environmental variable. Or, if you meant to use a file path, make sure
-        the path to the file is valid.
-      box_update_multi_provider: |-
-        You requested to update the box '%{name}'. This box has
-        multiple providers. You must explicitly select a single
-        provider to remove with `--provider`.
-
-        Available providers: %{providers}
-      box_update_no_box: |-
-        Box '%{name}' not installed, can't check for updates.
-      box_update_no_metadata: |-
-        The box '%{name}' is not a versioned box. The box was added
-        directly instead of from a box catalog. Vagrant can only
-        check the versions of boxes that were added from a catalog
-        such as from the public Vagrant Server.
-      box_update_no_name: |-
-        This machine doesn't have a box. Won't update anything.
-      bundler_disabled: |-
-        Vagrant's built-in bundler management mechanism is disabled because
-        Vagrant is running in an external bundler environment. In these
-        cases, plugin management does not work with Vagrant. To install
-        plugins, use your own Gemfile. To load plugins, either put the
-        plugins in the `plugins` group in your Gemfile or manually require
-        them in a Vagrantfile.
-      bundler_error: |-
-        Bundler, the underlying system Vagrant uses to install plugins,
-        reported an error. The error is shown below. These errors are usually
-        caused by misconfigured plugin installations or transient network
-        issues. The error from Bundler is:
-
-        %{message}
-      cant_read_mac_addresses: |-
-        The provider you are using  ('%{provider}') doesn't support the
-        "nic_mac_addresses" provider capability which is required
-        for advanced networking to work with this guest OS. Please inform
-        the author of the provider to add this feature.
-
-        Until then, you must remove any networking configurations other
-        than forwarded ports from your Vagrantfile for Vagrant to continue.
-      capability_host_explicit_not_detected: |-
-        The explicit capability host specified of '%{value}' could not be
-        found.
-
-        This is an internal error that users should never see. Please report
-        a bug.
-      capability_host_not_detected: |-
-        The capability host could not be detected. This is an internal error
-        that users should never see. Please report a bug.
-      capability_invalid: |-
-        The capability '%{cap}' is invalid. This is an internal error that
-        users should never see. Please report a bug.
-      capability_not_found: |-
-        The capability '%{cap}' could not be found. This is an internal error
-        that users should never see. Please report a bug.
-
-      cfengine_bootstrap_failed: |-
-        Failed to bootstrap CFEngine. Please see the output above to
-        see what went wrong and address the issue.
-      cfengine_cant_autodetect_ip: |-
-        Vagrant was unable to automatically detect the IP address of the
-        running machine to use as the policy server address. Please specify
-        the policy server address manually, or verify that the networks are
-        configured properly internally.
-      cfengine_install_failed: |-
-        After installing CFEngine, Vagrant still can't detect a proper
-        CFEngine installation. Please verify that CFEngine was properly
-        installed, as the installation may have failed.
-      cfengine_not_installed: |-
-        CFEngine appears not to be installed on the guest machine. Vagrant
-        can attempt to install CFEngine for you if you set the "install"
-        setting to "true", but this setting was not set. Please install
-        CFEngine on the guest machine or enable the "install" setting for
-        Vagrant to attempt to install it for you.
-      cli_invalid_options: |-
-        An invalid option was specified. The help for this command
-        is available below.
-
-        %{help}
-      cli_invalid_usage: |-
-        This command was not invoked properly. The help for this command is
-        available below.
-
-        %{help}
-      clone_not_found: |-
-        The specified Vagrantfile to clone from was not found. Please verify
-        the `config.vm.clone` setting points to a valid Vagrantfile.
-      clone_machine_not_found: |-
-        The clone environment hasn't been created yet. To clone from
-        another Vagrantfile, it must already be created with `vagrant up`.
-        It doesn't need to be running.
-
-        Additionally, the created environment must be started with a provider
-        matching this provider. For example, if you're using VirtualBox,
-        the clone environment must also be using VirtualBox.
-      command_deprecated: |-
-        The command 'vagrant %{name}' has been deprecated and is no longer functional
-        within Vagrant.
-      command_unavailable: |-
-        The executable '%{file}' Vagrant is trying to run was not
-        found in the PATH variable. This is an error. Please verify
-        this software is installed and on the path.
-      command_unavailable_windows: |-
-        The executable '%{file}' Vagrant is trying to run was not
-        found in the %PATH% variable. This is an error. Please verify
-        this software is installed and on the path.
-      communicator_not_found: |-
-        The requested communicator '%{comm}' could not be found.
-        Please verify the name is correct and try again.
-      config_invalid: |-
-        There are errors in the configuration of this machine. Please fix
-        the following errors and try again:
-
-        %{errors}
-      config_upgrade_errors: |-
-        Because there were errors upgrading your Vagrantfiles, Vagrant
-        can no longer continue. Please fix the errors above and try again.
-      copy_private_key_failed: |-
-        Vagrant failed to copy the default insecure private key into your
-        home directory. This is usually caused by a permissions error.
-        Please make sure the permissions of the source is readable and
-        the destination is writable.
-
-        Source: %{source}
-        Destination: %{destination}
-      corrupt_machine_index: |-
-        The machine index which stores all required information about
-        running Vagrant environments has become corrupt. This is usually
-        caused by external tampering of the Vagrant data folder.
-
-        Vagrant cannot manage any Vagrant environments if the index is
-        corrupt. Please attempt to manually correct it. If you are unable
-        to manually correct it, then remove the data file at the path below.
-        This will leave all existing Vagrant environments "orphaned" and
-        they'll have to be destroyed manually.
-
-        Path: %{path}
-      destroy_requires_force: |-
-        Destroy doesn't have a TTY to ask for confirmation. Please pass the
-        `--force` flag to force a destroy, otherwise attach a TTY so that
-        the destroy can be confirmed.
-      dotfile_upgrade_json_error: |-
-        A Vagrant 1.0.x local state file was found. Vagrant is able to upgrade
-        this to the latest format automatically, however various checks are
-        put in place to verify data isn't incorrectly deleted. In this case,
-        the old state file was not valid JSON. Vagrant 1.0.x would store state
-        as valid JSON, meaning that this file was probably tampered with or
-        manually edited. Vagrant's auto-upgrade process cannot continue in this
-        case.
-
-        In most cases, this can be resolve by simply removing the state file.
-        Note however though that if Vagrant was previously managing virtual
-        machines, they may be left in an "orphan" state. That is, if they are
-        running or exist, they'll have to manually be removed.
-
-        If you're unsure what to do, ask the Vagrant mailing list or contact
-        support.
-
-        State file path: %{state_file}
-      downloader_error: |-
-        An error occurred while downloading the remote file. The error
-        message, if any, is reproduced below. Please fix this error and try
-        again.
-
-        %{message}
-      downloader_interrupted: |-
-        The download was interrupted by an external signal. It did not
-        complete.
-      downloader_checksum_error: |-
-        The calculated checksum of the requested file does not match the expected
-        checksum!
-
-        File source:         %{source}
-        Checsum type:        %{type}
-        Expected checksum:   %{expected_checksum}
-        Calculated checksum: %{actual_checksum}
-      env_inval: |-
-        Vagrant received an "EINVAL" error while attempting to set some
-        environment variables. This is usually caused by the total size of your
-        environment variables being too large. Vagrant sets a handful of
-        environment variables to function and requires this to work. Please
-        delete some environment variables prior to executing Vagrant to
-        fix this.
-      environment_locked: |-
-        Vagrant attempted to acquire a lock named '%{name}', but this
-        lock is being held by another instance of Vagrant already. Please
-        wait and try again.
-      environment_non_existent_cwd: |-
-        The working directory for Vagrant doesn't exist! This is the
-        specified working directory:
-
-        %{cwd}
-      forward_port_adapter_not_found: |-
-        The adapter to attach a forwarded port to was not found. Please
-        verify that the given adapter is setup on the machine as a NAT
-        interface.
-
-        Host port: %{host}
-        Guest port: %{guest}
-        Adapter: %{adapter}
-      freebsd_nfs_whitespace: |-
-        FreeBSD hosts do not support sharing directories with whitespace in
-        their path. Please adjust your path accordingly.
-      guest_capability_invalid: |-
-        The registered guest capability '%{cap}' for the
-        detected guest OS '%{guest}' is invalid. The capability does
-        not implement the proper method. This is a bug with Vagrant or the
-        plugin that implements this capability. Please report a bug.
-      guest_capability_not_found: |-
-        Vagrant attempted to execute the capability '%{cap}'
-        on the detect guest OS '%{guest}', but the guest doesn't
-        support that capability. This capability is required for your
-        configuration of Vagrant. Please either reconfigure Vagrant to
-        avoid this capability or fix the issue by creating the capability.
-      guest_explicit_not_detected: |-
-        The guest implementation explicitly specified in your Vagrantfile
-        ("%{value}") could not be found. Please verify that the plugin is
-        installed which implements this guest and that the value you
-        used for `config.vm.guest` is correct.
-      guest_not_detected: |-
-        The guest operating system of the machine could not be detected!
-        Vagrant requires this knowledge to perform specific tasks such
-        as mounting shared folders and configuring networks. Please add
-        the ability to detect this guest operating system to Vagrant
-        by creating a plugin or reporting a bug.
-      home_dir_later_version: |-
-        It appears that a newer version of Vagrant was run on this machine
-        at some point. The current version of Vagrant is unable to read
-        the configuration structure of this newer version. Please upgrade to
-        the latest version of Vagrant.
-      home_dir_not_accessible: |-
-        The home directory you specified is not accessible. The home
-        directory that Vagrant uses must be both readable and writable.
-
-        You specified: %{home_path}
-      home_dir_unknown_version: |-
-        The Vagrant app data directory (%{path}) is in a
-        structure Vagrant doesn't understand. This is a rare exception.
-        Please report an issue or ask the mailing list for help.
-      host_explicit_not_detected: |-
-        The host implementation explicitly specified in your Vagrantfile
-        ("%{value}") could not be found. Please verify that the plugin is
-        installed which implements this host and that the value you used
-        for `config.vagrant.host` is correct.
-      interrupted: |-
-        Vagrant exited after cleanup due to external interrupt.
-      local_data_dir_not_accessible: |-
-        The directory Vagrant will use to store local environment-specific
-        state is not accessible. The directory specified as the local data
-        directory must be both readable and writable for the user that is
-        running Vagrant.
-
-        Local data directory: %{local_data_path}
-      linux_mount_failed: |-
-        Failed to mount folders in Linux guest. This is usually because
-        the "vboxsf" file system is not available. Please verify that
-        the guest additions are properly installed in the guest and
-        can work properly. The command attempted was:
-
-        %{command}
-
-        The error output from the last command was:
-
-        %{output}
-      linux_rdp_client_not_found: |-
-        An appropriate RDP client was not found. Vagrant requires either
-        `xfreerdp` or `rdesktop` in order to connect via RDP to the Vagrant
-        environment. Please ensure one of these applications is installed and
-        available on the path and try again.
-      machine_action_locked: |-
-        An action '%{action}' was attempted on the machine '%{name}',
-        but another process is already executing an action on the machine.
-        Vagrant locks each machine for access by only one process at a time.
-        Please wait until the other Vagrant process finishes modifying this
-        machine, then try again.
-
-        If you believe this message is in error, please check the process
-        listing for any "ruby" or "vagrant" processes and kill them. Then
-        try again.
-      machine_guest_not_ready: |-
-        Guest-specific operations were attempted on a machine that is not
-        ready for guest communication. This should not happen and a bug
-        should be reported.
-      machine_locked: |-
-        Vagrant can't use the requested machine because it is locked! This
-        means that another Vagrant process is currently reading or modifying
-        the machine. Please wait for that Vagrant process to end and try
-        again. Details about the machine are shown below:
-
-        Name: %{name}
-        Provider: %{provider}
-      machine_not_found: |-
-        The machine with the name '%{name}' was not found configured for
-        this Vagrant environment.
-      machine_state_invalid: |-
-        An internal error has occurred! The provider of the machine you're
-        trying to work with reported an invalid state. This is a bug with
-        the provider you're using, and not with Vagrant itself or with
-        any configuration you may have done. Please report this bug to
-        the proper location.
-      multi_vm_target_required: |-
-        This command requires a specific VM name to target in a multi-VM environment.
-      net_ssh_exception: |-
-        An error occurred in the underlying SSH library that Vagrant uses.
-        The error message is shown below. In many cases, errors from this
-        library are caused by ssh-agent issues. Try disabling your SSH
-        agent or removing some keys and try again.
-
-        If the problem persists, please report a bug to the net-ssh project.
-
-        %{message}
-      network_type_not_supported: |-
-        The %{type} network type is not supported for this box or guest.
-      network_manager_not_installed: |-
-        Vagrant was instructed to configure the %{device} network device to
-        be managed by NetworkManager. However, the configured guest VM does
-        not have NetworkManager installed. To fix this error please remove
-        the `nm_controlled` setting from local Vagantfile. If NetworkManager
-        is required to manage the network devices, please use a box with
-        NetworkManager installed.
-      nfs_bad_exports: |-
-        NFS is reporting that your exports file is invalid. Vagrant does
-        this check before making any changes to the file. Please correct
-        the issues below and execute "vagrant reload":
-
-        %{output}
-      nfs_exports_failed: |-
-        Vagrant failed to install an updated NFS exports file. This may be
-        due to overly restrictive permissions on your NFS exports file. Please
-        validate them and try again.
-
-        command: %{command}
-        stdout: %{stdout}
-        stderr: %{stderr}
-      nfs_cant_read_exports: |-
-        Vagrant can't read your current NFS exports! The exports file should be
-        readable by any user. This is usually caused by invalid permissions
-        on your NFS exports file. Please fix them and try again.
-      nfs_mount_failed: |-
-        Mounting NFS shared folders failed. This is most often caused by the NFS
-        client software not being installed on the guest machine. Please verify
-        that the NFS client software is properly installed, and consult any resources
-        specific to the linux distro you're using for more information on how to
-        do this.
-      nfs_no_guest_ip: |-
-        No guest IP was given to the Vagrant core NFS helper. This is an
-        internal error that should be reported as a bug.
-      nfs_no_host_ip: |-
-        No host IP was given to the Vagrant core NFS helper. This is
-        an internal error that should be reported as a bug.
-      nfs_no_hostonly_network: |-
-        NFS requires a host-only network to be created.
-        Please add a host-only network to the machine (with either DHCP or a
-        static IP) for NFS to work.
-      nfs_no_valid_ids: |-
-        No valid IDs were given to the NFS synced folder implementation to
-        prune. This is an internal bug with Vagrant and an issue should be
-        filed.
-      nfs_not_supported: |-
-        It appears your machine doesn't support NFS, or there is not an
-        adapter to enable NFS on this machine for Vagrant. Please verify
-        that `nfsd` is installed on your machine, and try again. If you're
-        on Windows, NFS isn't supported. If the problem persists, please
-        contact Vagrant support.
-      nfs_client_not_installed_in_guest: |-
-        No NFS client was detected as installed in your guest machine. This
-        is required for NFS synced folders to work. In addition to this, Vagrant
-        doesn't know how to automatically install NFS for your machine, so
-        you must do this manually.
-
-        If this message is erroneous, you may disable this check by setting
-        `config.nfs.verify_installed` to `false` in your Vagrantfile.
-      no_default_provider: |-
-        No usable default provider could be found for your system.
-
-        Vagrant relies on interactions with 3rd party systems, known as
-        "providers", to provide Vagrant with resources to run development
-        environments. Examples are VirtualBox, VMware, Hyper-V.
-
-        The easiest solution to this message is to install VirtualBox, which
-        is available for free on all major platforms.
-
-        If you believe you already have a provider available, make sure it
-        is properly installed and configured. You can see more details about
-        why a particular provider isn't working by forcing usage with
-        `vagrant up --provider=PROVIDER`, which should give you a more specific
-        error message for that particular provider.
-      no_default_synced_folder_impl: |-
-        No synced folder implementation is available for your synced folders!
-        Please consult the documentation to learn why this may be the case.
-        You may force a synced folder implementation by specifying a "type:"
-        option for the synced folders. Available synced folder implementations
-        are listed below.
-
-        %{types}
-      no_env: |-
-        A Vagrant environment or target machine is required to run this
-        command. Run `vagrant init` to create a new Vagrant environment. Or,
-        get an ID of a target machine from `vagrant global-status` to run
-        this command on. A final option is to change to a directory with a
-        Vagrantfile and to try again.
-      plugin_gem_not_found: |-
-        The plugin '%{name}' could not be installed because it could not
-        be found. Please double check the name and try again.
-      plugin_install_license_not_found: |-
-        The license file to install could not be found. Please verify
-        the path you gave is correct. The path to the license file given
-        was: '%{path}'
-      plugin_install_space: |-
-        The directory where plugins are installed (the Vagrant home directory)
-        has a space in it. On Windows, there is a bug in Ruby when compiling
-        plugins into directories with spaces. Please move your Vagrant home
-        directory to a path without spaces and try again.
-      plugin_install_version_conflict: |-
-        The plugin(s) can't be installed due to the version conflicts below.
-        This means that the plugins depend on a library version that conflicts
-        with other plugins or Vagrant itself, creating an impossible situation
-        where Vagrant wouldn't be able to load the plugins.
-
-        You can fix the issue by either removing a conflicting plugin or
-        by contacting a plugin author to see if they can address the conflict.
-
-        %{conflicts}
-      plugin_init_error: |-
-        The plugins failed to initialize correctly. This may be due to manual
-        modifications made within the Vagrant home directory. Vagrant can
-        attempt to automatically correct this issue by running:
-
-          vagrant plugin repair
-
-        If Vagrant was recently updated, this error may be due to incompatible
-        versions of dependencies. To fix this problem please remove and re-install
-        all plugins. Vagrant can attempt to do this automatically by running:
-
-          vagrant plugin expunge --reinstall
-
-        Error message given during initialization: %{message}
-      plugin_load_error: |-
-        The plugins failed to load properly. The error message given is
-        shown below.
-
-        %{message}
-      plugin_not_installed: |-
-        The plugin '%{name}' is not installed. Please install it first.
-      plugin_state_file_not_parsable: |-
-        Failed to parse the state file "%{path}":
-        %{message}
-
-        Please remove the file and reinstall the plugins.
-        If this error recurs, please report a bug.
-      plugin_uninstall_system: |-
-        The plugin you're attempting to uninstall ('%{name}') is a
-        system plugin. This means that the plugin is part of the installation
-        of Vagrant. These plugins cannot be removed.
-
-        You can however, install a plugin with the same name to replace
-        these plugins. User-installed plugins take priority over
-        system-installed plugins.
-      plugin_source_error: |-
-        Vagrant failed to load a configured plugin source. This can be caused
-        by a variety of issues including: transient connectivity issues, proxy
-        filtering rejecting access to a configured plugin source, or a configured
-        plugin source not responding correctly. Please review the error message
-        below to help resolve the issue:
-
-          %{error_msg}
-
-        Source: %{source}
-      pushes_not_defined: |-
-        The Vagrantfile does not define any 'push' strategies. In order to use
-        `vagrant push`, you must define at least one push strategy:
-
-            config.push.define "ftp" do |push|
-              # ... push-specific options
-            end
-      push_strategy_not_defined: |-
-        The push strategy '%{name}' is not defined in the Vagrantfile. Defined
-        strategy names are:
-
-            %{pushes}
-      push_strategy_not_loaded: |-
-        There are no push strategies named '%{name}'. Please make sure you
-        spelled it correctly. If you are using an external push strategy, you
-        may need to install a plugin. Loaded push strategies are:
-
-            %{pushes}
-      push_strategy_not_provided: |-
-        The Vagrantfile defines more than one 'push' strategy. Please specify a
-        strategy. Defined strategy names are:
-
-            %{pushes}
-      package_include_symlink: |-
-        A file or directory you're attempting to include with your packaged
-        box has symlinks in it. Vagrant cannot include symlinks in the
-        resulting package. Please remove the symlinks and try again.
-      provider_cant_install: |-
-        The provider '%{provider}' doesn't support automatic installation.
-        This is a limitation of this provider. Please report this as a feature
-        request to the provider in question. To install this provider, you'll
-        have to do so manually.
-      provider_checksum_mismatch: |-
-        The checksum of the downloaded provider '%{provider}' did not match the
-        expected value. If the problem persists, please install the provider
-        manually.
-
-        Expected: %{expected}
-        Received: %{actual}
-      provider_install_failed: |-
-        Installation of the provider '%{provider}' failed! The stdout
-        and stderr are shown below. Please read the error output, resolve it,
-        and try again. If problem persists, please install the provider
-        manually.
-
-        Stdout: %{stdout}
-        Stderr: %{stderr}
-      provider_not_found: |-
-        The provider '%{provider}' could not be found, but was requested to
-        back the machine '%{machine}'. Please use a provider that exists.
-      provider_not_usable: |-
-        The provider '%{provider}' that was requested to back the machine
-        '%{machine}' is reporting that it isn't usable on this system. The
-        reason is shown below:
-
-        %{message}
-      provisioner_flag_invalid: |-
-        '%{name}' is not a known provisioner. Please specify a valid
-        provisioner.
-      provisioner_winrm_unsupported: |-
-        The provisioner '%{name}' doesn't support provisioning on
-        Windows guests via WinRM. This is likely not a limitation
-        of the provisioner itself but rather that Vagrant doesn't know
-        how to run this provisioner over WinRM.
-
-        If you'd like this provisioner to work over WinRM, please
-        take a look at the Vagrant source code linked below and try
-        to contribute back support. Thank you!
-
-        https://github.com/mitchellh/vagrant
-      rsync_error: |-
-        There was an error when attempting to rsync a synced folder.
-        Please inspect the error message below for more info.
-
-        Host path: %{hostpath}
-        Guest path: %{guestpath}
-        Command: %{command}
-        Error: %{stderr}
-      rsync_guest_install_error: |-
-        Installation of rsync into the guest has failed! The stdout
-        and stderr are shown below. Please read the error output, resolve
-        it and try again. If the problem persists, please install rsync
-        manually within the guest.
-
-        Command: %{command}
-        Stdout: %{stdout}
-        Stderr: %{stderr}
-      rsync_not_found: |-
-        "rsync" could not be found on your PATH. Make sure that rsync
-        is properly installed on your system and available on the PATH.
-      rsync_not_installed_in_guest: |-
-        "rsync" was not detected as installed in your guest machine. This
-        is required for rsync synced folders to work. In addition to this,
-        Vagrant doesn't know how to automatically install rsync for your
-        machine, so you must do this manually.
-      scp_permission_denied: |-
-        Failed to upload a file to the guest VM via SCP due to a permissions
-        error. This is normally because the SSH user doesn't have permission
-        to write to the destination location. Alternately, the user running
-        Vagrant on the host machine may not have permission to read the file.
-
-        Source: %{from}
-        Dest: %{to}
-      scp_unavailable: |-
-        SSH server on the guest doesn't support SCP. Please install the necessary
-        software to enable SCP on your guest operating system.
-      shared_folder_create_failed: |-
-        Failed to create the following shared folder on the host system. This is
-        usually because Vagrant does not have sufficient permissions to create
-        the folder.
-
-        %{path}
-
-        Please create the folder manually or specify another path to share.
-      shell_expand_failed: |-
-        Vagrant failed to determine the shell expansion of a guest path
-        (probably for one of your shared folders). This is an extremely rare
-        error case and most likely indicates an unusual configuration of the
-        guest system. Please report a bug with your Vagrantfile and debug log.
-      snapshot_force: |-
-        You must include the `--force` option to replace an existing snapshot.
-      snapshot_not_supported: |-
-        This provider doesn't support snapshots.
-
-        This may be intentional or this may be a bug. If this provider
-        should support snapshots, then please report this as a bug to the
-        maintainer of the provider.
-      snapshot_not_found: |-
-        The snapshot name `%{snapshot_name}` was not found for the
-        virtual machine `%{machine}`.
-      ssh_authentication_failed: |-
-        SSH authentication failed! This is typically caused by the public/private
-        keypair for the SSH user not being properly set on the guest VM. Please
-        verify that the guest VM is setup with the proper public key, and that
-        the private key path for Vagrant is setup properly as well.
-      ssh_bad_exit_status: |-
-        The following SSH command responded with a non-zero exit status.
-        Vagrant assumes that this means the command failed!
-
-        %{command}
-
-        Stdout from the command:
-
-        %{stdout}
-
-        Stderr from the command:
-
-        %{stderr}
-      ssh_bad_exit_status_muted: |-
-        The SSH command responded with a non-zero exit status. Vagrant
-        assumes that this means the command failed. The output for this command
-        should be in the log above. Please read the output to determine what
-        went wrong.
-      ssh_channel_open_fail: |-
-        Failed to open an SSH channel on the remote end! This typically
-        means that the maximum number of active sessions was hit on the
-        SSH server. Please configure your remote SSH server to resolve
-        this issue.
-      ssh_connect_eacces: |-
-        SSH is getting permission denied errors when attempting to connect
-        to the IP for SSH. This is usually caused by network rules and not being
-        able to connect to the specified IP. Please try changing the IP on
-        which the guest machine binds to for SSH.
-      ssh_connection_refused: |-
-        SSH connection was refused! This usually happens if the VM failed to
-        boot properly. Some steps to try to fix this: First, try reloading your
-        VM with `vagrant reload`, since a simple restart sometimes fixes things.
-        If that doesn't work, destroy your VM and recreate it with a `vagrant destroy`
-        followed by a `vagrant up`. If that doesn't work, contact a Vagrant
-        maintainer (support channels listed on the website) for more assistance.
-      ssh_connection_aborted: |-
-        SSH connection was aborted! This usually happens when the machine is taking
-        too long to reboot or the SSH daemon is not properly configured on the VM.
-        First, try reloading your machine with `vagrant reload`, since a simple
-        restart sometimes fixes things. If that doesn't work, destroy your machine
-        and recreate it with a `vagrant destroy` followed by a `vagrant up`. If that
-        doesn't work, contact support.
-      ssh_connection_reset: |-
-        SSH connection was reset! This usually happens when the machine is
-        taking too long to reboot. First, try reloading your machine with
-        `vagrant reload`, since a simple restart sometimes fixes things.
-        If that doesn't work, destroy your machine and recreate it with
-        a `vagrant destroy` followed by a `vagrant up`. If that doesn't work,
-        contact support.
-      ssh_connection_timeout: |-
-        Vagrant timed out while attempting to connect via SSH. This usually
-        means that the VM booted, but there are issues with the SSH configuration
-        or network connectivity issues. Please try to `vagrant reload` or
-        `vagrant up` again.
-      ssh_disconnected: |-
-        The SSH connection was unexpectedly closed by the remote end. This
-        usually indicates that SSH within the guest machine was unable to
-        properly start up. Please boot the VM in GUI mode to check whether
-        it is booting properly.
-      ssh_no_route: |-
-        While attempting to connect with SSH, a "no route to host" (EHOSTUNREACH)
-        error was received. Please verify your network settings are correct
-        and try again.
-      ssh_host_down: |-
-        While attempting to connect with SSH, a "host is down" (EHOSTDOWN)
-        error was received. Please verify your SSH settings are correct
-        and try again.
-      ssh_invalid_shell: |-
-        The configured shell (config.ssh.shell) is invalid and unable
-        to properly execute commands. The most common cause for this is
-        using a shell that is unavailable on the system. Please verify
-        you're using the full path to the shell and that the shell is
-        executable by the SSH user.
-      ssh_insert_key_unsupported: |-
-        Vagrant is configured to generate a random keypair and insert it
-        onto the guest machine, but it appears Vagrant doesn't know how to do
-        this with your guest OS. Please disable key insertion by setting
-        `config.ssh.insert_key = false` in the Vagrantfile.
-
-        After doing so, run `vagrant reload` for the setting to take effect.
-
-        If you'd like Vagrant to learn how to insert keys on this OS, please
-        open an issue with details about your environment.
-      ssh_is_putty_link: |-
-        The `ssh` executable found in the PATH is a PuTTY Link SSH client.
-        Vagrant is only compatible with OpenSSH SSH clients. Please install
-        an OpenSSH SSH client or manually SSH in using your existing client
-        using the information below.
-
-        Host: %{host}
-        Port: %{port}
-        Username: %{username}
-        Private key: %{key_path}
-      ssh_key_bad_owner: |-
-        The private key to connect to the machine via SSH must be owned
-        by the user running Vagrant. This is a strict requirement from
-        SSH itself. Please fix the following key to be owned by the user
-        running Vagrant:
-
-        %{key_path}
-      ssh_key_bad_permissions: |-
-        The private key to connect to this box via SSH has invalid permissions
-        set on it. The permissions of the private key should be set to 0600, otherwise SSH will
-        ignore the key. Vagrant tried to do this automatically for you but failed. Please set the
-        permissions on the following file to 0600 and then try running this command again:
-
-        %{key_path}
-
-        Note that this error occurs after Vagrant automatically tries to
-        do this for you. The likely cause of this error is a lack of filesystem
-        permissions or even filesystem functionality. For example, if your
-        Vagrant data is on a USB stick, a common case is that chmod is
-        not supported. The key will need to be moved to a filesystem that
-        supports chmod.
-      ssh_key_type_not_supported: |-
-        The private key you're attempting to use with this Vagrant box uses
-        an unsupported encryption type. The SSH library Vagrant uses does not support
-        this key type. Please use `ssh-rsa` or `ssh-dss` instead. Note that
-        sometimes keys in your ssh-agent can interfere with this as well,
-        so verify the keys are valid there in addition to standard
-        file paths.
-      ssh_not_ready: |-
-        The provider for this Vagrant-managed machine is reporting that it
-        is not yet ready for SSH. Depending on your provider this can carry
-        different meanings. Make sure your machine is created and running and
-        try again. Additionally, check the output of `vagrant status` to verify
-        that the machine is in the state that you expect. If you continue to
-        get this error message, please view the documentation for the provider
-        you're using.
-      ssh_run_requires_keys: |-
-        Using `vagrant ssh -c` requires key-based SSH authentication, but your
-        Vagrant environment is configured to use only password-based authentication.
-        Please configure your Vagrantfile with a private key to use this
-        feature.
-
-        Note that Vagrant can automatically insert a keypair and use that
-        keypair for you. Just set `config.ssh.insert_key = true` in your
-        Vagrantfile.
-      ssh_unavailable: "`ssh` binary could not be found. Is an SSH client installed?"
-      ssh_unavailable_windows: |-
-        `ssh` executable not found in any directories in the %PATH% variable. Is an
-        SSH client installed? Try installing Cygwin, MinGW or Git, all of which
-        contain an SSH client. Or use your favorite SSH client with the following
-        authentication information shown below:
-
-        Host: %{host}
-        Port: %{port}
-        Username: %{username}
-        Private key: %{key_path}
-      synced_folder_unusable: |-
-        The synced folder type '%{type}' is reporting as unusable for
-        your current setup. Please verify you have all the proper
-        prerequisites for using this shared folder type and try again.
-      ui_expects_tty: |-
-        Vagrant is attempting to interface with the UI in a way that requires
-        a TTY. Most actions in Vagrant that require a TTY have configuration
-        switches to disable this requirement. Please do that or run Vagrant
-        with TTY.
-      unimplemented_provider_action: |-
-        Vagrant attempted to call the action '%{action}' on the provider
-        '%{provider}', but this provider doesn't support this action. This
-        is probably a bug in either the provider or the plugin calling this
-        action, and should be reported.
-      vagrantfile_exists: |-
-        `Vagrantfile` already exists in this directory. Remove it before
-        running `vagrant init`.
-      vagrantfile_load_error: |-
-        There was an error loading a Vagrantfile. The file being loaded
-        and the error message are shown below. This is usually caused by
-        a syntax error.
-
-        Path: %{path}
-        Line number: %{line}
-        Message: %{exception_class}: %{message}
-      vagrantfile_syntax_error: |-
-        There is a syntax error in the following Vagrantfile. The syntax error
-        message is reproduced below for convenience:
-
-        %{file}
-      vagrantfile_write_error: |-
-        The user that is running Vagrant doesn't have the proper permissions
-        to write a Vagrantfile to the specified location. Please ensure that
-        you call `vagrant init` in a location where the proper permissions
-        are in place to create a Vagrantfile.
-      vagrant_version_bad: |-
-        This Vagrant environment has specified that it requires the Vagrant
-        version to satisfy the following version requirements:
-
-          %{requirements}
-
-        You are running Vagrant %{version}, which does not satisfy
-        these requirements. Please change your Vagrant version or update
-        the Vagrantfile to allow this Vagrant version. However, be warned
-        that if the Vagrantfile has specified another version, it probably has
-        good reason to do so, and changing that may cause the environment to
-        not function properly.
-      vboxmanage_error: |-
-        There was an error while executing `VBoxManage`, a CLI used by Vagrant
-        for controlling VirtualBox. The command and stderr is shown below.
-
-        Command: %{command}
-
-        Stderr: %{stderr}
-      vboxmanage_launch_error: |-
-        There was an error running VBoxManage. This is usually a permissions
-        problem or installation problem with VirtualBox itself, and not Vagrant.
-        Please note the error message below (if any), resolve the issue, and
-        try Vagrant again.
-
-        %{message}
-      vboxmanage_not_found_error: |-
-        The "VBoxManage" command or one of its dependencies could not
-        be found. Please verify VirtualBox is properly installed. You can verify
-        everything is okay by running "VBoxManage --version" and verifying
-        that the VirtualBox version is outputted.
-
-        If you're on Windows and just installed VirtualBox, you have to
-        log out and log back in for the new environmental variables to take
-        effect. If you're on Linux or Mac, verify your PATH contains the folder
-        that has VBoxManage in it.
-      vboxmanage_not_found_wsl_error: |-
-        The "VBoxManage.exe" command or one of its dependencies could not
-        be found. Please verify VirtualBox is properly installed. You can verify
-        everything is okay by running "VBoxManage.exe --version" and verifying
-        that the VirtualBox version is outputted.
-
-        If you just installed VirtualBox, you have to log out and log back in for
-        the new environmental variables to take effect. Using the VirtualBox
-        provider within the WSL requires VirtualBox executables to be available
-        on the system PATH.
-      virtualbox_broken_version_040214: |-
-        Vagrant detected you have VirtualBox 4.2.14 installed. VirtualBox
-        4.2.14 contains a critical bug which prevents it from working with
-        Vagrant. VirtualBox 4.2.16+ fixes this problem. Please upgrade
-        VirtualBox.
-      virtualbox_guest_property_not_found: |-
-        Could not find a required VirtualBox guest property:
-          %{guest_property}
-        This is an internal error that should be reported as a bug.
-      virtualbox_invalid_version: |-
-        Vagrant has detected that you have a version of VirtualBox installed
-        that is not supported by this version of Vagrant. Please install one of
-        the supported versions listed below to use Vagrant:
-
-        %{supported_versions}
-
-        A Vagrant update may also be available that adds support for the version
-        you specified. Please check www.vagrantup.com/downloads.html to download
-        the latest version.
-      virtualbox_kernel_module_not_loaded: |-
-        VirtualBox is complaining that the kernel module is not loaded. Please
-        run `VBoxManage --version` or open the VirtualBox GUI to see the error
-        message which should contain instructions on how to fix this error.
-      virtualbox_install_incomplete: |-
-        VirtualBox is complaining that the installation is incomplete. Please
-        run `VBoxManage --version` to see the error message which should contain
-        instructions on how to fix this error.
-      virtualbox_mount_failed: |-
-        Vagrant was unable to mount VirtualBox shared folders. This is usually
-        because the filesystem "vboxsf" is not available. This filesystem is
-        made available via the VirtualBox Guest Additions and kernel module.
-        Please verify that these guest additions are properly installed in the
-        guest. This is not a bug in Vagrant and is usually caused by a faulty
-        Vagrant box. For context, the command attempted was:
-
-        %{command}
-
-        The error output from the command was:
-
-        %{output}
-      virtualbox_mount_not_supported_bsd: |-
-        Vagrant is not able to mount VirtualBox shared folders on BSD-based
-        guests. BSD-based guests do not support the VirtualBox filesystem at
-        this time.
-
-        To change the type of the default synced folder, specify the type as
-        rsync or nfs:
-
-            config.vm.synced_folder ".", "/vagrant", type: "nfs" # or "rsync"
-
-        Alternatively, if you do not need to mount the default synced folder,
-        you can also disable it entirely:
-
-            config.vm.synced_folder ".", "/vagrant", disabled: true
-
-        You can read more about Vagrant's synced folder types and the various
-        configuration options on the Vagrant website.
-
-        This is not a bug in Vagrant.
-      virtualbox_name_exists: |-
-        The name of your virtual machine couldn't be set because VirtualBox
-        is reporting another VM with that name already exists. Most of the
-        time, this is because of an error with VirtualBox not cleaning up
-        properly. To fix this, verify that no VMs with that name do exist
-        (by opening the VirtualBox GUI). If they don't, then look at the
-        folder in the error message from VirtualBox below and remove it
-        if there isn't any information you need in there.
-
-        VirtualBox error:
-
-        %{stderr}
-      virtualbox_no_name: |-
-        Vagrant was unable to determine the recommended name for your
-        VirtualBox VM. This is usually an issue with VirtualBox. The output
-        from VirtualBox is shown below, which may contain an error to fix.
-        The best way to fix this issue is usually to uninstall VirtualBox,
-        restart your computer, then reinstall VirtualBox.
-
-        VirtualBox output:
-
-        %{output}
-      virtualbox_no_room_for_high_level_network: |-
-        There is no available slots on the VirtualBox VM for the configured
-        high-level network interfaces. "private_network" and "public_network"
-        network configurations consume a single network adapter slot on the
-        VirtualBox VM. VirtualBox limits the number of slots to 8, and it
-        appears that every slot is in use. Please lower the number of used
-        network adapters.
-      virtualbox_not_detected: |-
-        Vagrant could not detect VirtualBox! Make sure VirtualBox is properly installed.
-        Vagrant uses the `VBoxManage` binary that ships with VirtualBox, and requires
-        this to be available on the PATH. If VirtualBox is installed, please find the
-        `VBoxManage` binary and add it to the PATH environmental variable.
-      virtualbox_user_mismatch: |-
-        The VirtualBox VM was created with a user that doesn't match the
-        current user running Vagrant. VirtualBox requires that the same user
-        be used to manage the VM that was created. Please re-run Vagrant with
-        that user. This is not a Vagrant issue.
-
-        The UID used to create the VM was: %{original_uid}
-        Your UID is: %{uid}
-      virtualbox_version_empty: |-
-        Vagrant detected that VirtualBox appears installed on your system,
-        but calls to detect the version are returning empty. This is often
-        indicative of installation issues with VirtualBox. Please verify
-        that VirtualBox is properly installed. As a final verification,
-        please run the following command manually and verify a version is
-        outputted:
-
-        %{vboxmanage} --version
-      vm_creation_required: |-
-        VM must be created before running this command. Run `vagrant up` first.
-      vm_inaccessible: |-
-        Your VM has become "inaccessible." Unfortunately, this is a critical error
-        with VirtualBox that Vagrant can not cleanly recover from. Please open VirtualBox
-        and clear out your inaccessible virtual machines or find a way to fix
-        them.
-      vm_name_exists: |-
-        A VirtualBox machine with the name '%{name}' already exists.
-        Please use another name or delete the machine with the existing
-        name, and try again.
-      vm_no_match: |-
-        No virtual machines matched the regular expression given.
-      vm_not_found: |-
-        A VM by the name of %{name} was not found.
-      vm_not_running: |-
-        VM must be running to open SSH connection. Run `vagrant up`
-        to start the virtual machine.
-      test_key: "test value"
-      wsl_vagrant_version_mismatch: |-
-        Vagrant cannot currently enable access to manage machines within the Windows
-        environment because the version of Vagrant installed on Windows does not
-        match this version of Vagrant running within the Windows Subsystem for Linux.
-        Please ensure both installation of Vagrant are the same. If you do not want
-        update your Vagrant installations you can disable Windows access by unsetting
-        the `VAGRANT_WSL_ACCESS_WINDOWS_USER` environment variable.
-
-          Windows Vagrant version: %{windows_version}
-          Windows Subsystem for Linux Vagrant version: %{wsl_version}
-      wsl_vagrant_access_error: |-
-        Vagrant will not operate outside the Windows Subsystem for Linux unless explicitly
-        instructed. Due to the inability to enforce expected Linux file ownership and
-        permissions on the Windows system, Vagrant will not make modifications to prevent
-        unexpected errors. To learn more about this, and the options that are available,
-        please refer to the Vagrant documentation:
-
-          https://www.vagrantup.com/docs/other/wsl.html
-      wsl_virtualbox_windows_access: |-
-        Vagrant is unable to use the VirtualBox provider from the Windows Subsystem for
-        Linux without access to the Windows environment. Enabling this access must be
-        done with caution and an understanding of the implications. For more information
-        on enabing Windows access and using VirtualBox from the Windows Subsystem for
-        Linux, please refer to the Vagrant documentation:
-
-          https://www.vagrantup.com/docs/other/wsl.html
-#-------------------------------------------------------------------------------
-# Translations for config validation errors
-#-------------------------------------------------------------------------------
-    config:
-      common:
-        bad_field: "The following settings shouldn't exist: %{fields}"
-      chef:
-        cookbooks_path_empty: |-
-          Missing required value for `chef.cookbooks_path'.
-        nodes_path_empty: |-
-          Missing required value for `chef.nodes_path'.
-        environment_path_missing: |-
-          Environment path not found: %{path}
-        environment_path_required: |-
-          When 'environment' is specified, you must provide 'environments_path'.
-        cookbooks_path_missing: |-
-          Cookbook path doesn't exist: %{path}
-        custom_config_path_missing: |-
-          Path specified for "custom_config_path" does not exist.
-        server_url_empty: "Chef Server URL must be populated."
-        validation_key_path: "Validation key path must be valid path to your Chef Server validation key."
-      loader:
-        bad_v1_key: |-
-          Unknown configuration section '%{key}'. If this section was part of
-          a Vagrant 1.0.x plugin, note that 1.0.x plugins are incompatible with 1.1+.
-      root:
-        bad_key: |-
-          Unknown configuration section '%{key}'.
-      ssh:
-        private_key_missing: "`private_key_path` file must exist: %{path}"
-      vm:
-        bad_version: |-
-          Invalid box version constraints: %{version}
-        box_download_ca_cert_not_found: |-
-          "box_download_ca_cert" file not found: %{path}
-        box_download_ca_path_not_found: |-
-          "box_download_ca_path" directory not found: %{path}
-        box_download_checksum_blank: |-
-          Checksum type specified but "box_download_checksum" is blank
-        box_download_checksum_notblank: |-
-          Checksum specified but must also specify "box_download_checksum_type"
-        box_missing: "A box must be specified."
-        clone_and_box: "Only one of clone or box can be specified."
-        hostname_invalid_characters: |-
-          The hostname set for the VM should only contain letters, numbers,
-          hyphens or dots. It cannot start with a hyphen or dot.
-        name_invalid: |-
-          The sub-VM name '%{name}' is invalid. Please don't use special characters.
-        network_ip_ends_in_one: |-
-          You assigned a static IP ending in ".1" to this machine.
-          This is very often used by the router and can cause the
-          network to not work properly. If the network doesn't work
-          properly, try changing this IP.
-        network_ip_required: |-
-          An IP is required for a private network.
-        network_fp_invalid_port: |-
-          Ports to forward must be 1 to 65535
-        network_fp_host_not_unique: |-
-          Forwarded port '%{host}' (host port) is declared multiple times
-          with the protocol '%{protocol}'.
-        network_fp_requires_ports: |-
-          Forwarded port definitions require a "host" and "guest" value
-        network_type_invalid: |-
-          Network type '%{type}' is invalid. Please use a valid network type.
-        provisioner_not_found: |-
-          The '%{name}' provisioner could not be found.
-        shared_folder_guestpath_duplicate: |-
-          A shared folder guest path is used multiple times. Shared
-          folders must all map to a unique guest path: %{path}
-        shared_folder_guestpath_relative: |-
-          The shared folder guest path must be absolute: %{path}
-        shared_folder_hostpath_missing: |-
-          The host path of the shared folder is missing: %{path}
-        shared_folder_nfs_owner_group: |-
-          Shared folders that have NFS enabled do not support owner/group
-          attributes. Host path: %{path}
-        shared_folder_mount_options_array: |-
-          Shared folder mount options specified by 'mount_options' must
-          be an array of options.
-
-#-------------------------------------------------------------------------------
-# Translations for commands. e.g. `vagrant x`
-#-------------------------------------------------------------------------------
-    commands:
-      deprecated: |-
-        [DEPRECATION WARNING]: The Vagrant command 'vagrant %{name}' is scheduled be
-        deprecated in an upcoming Vagrant release.
-      common:
-        vm_already_running: |-
-          VirtualBox VM is already running.
-        vm_not_created: "VM not created. Moving on..."
-        vm_not_running: "VM is not currently running. Please, first bring it up with `vagrant up` then run this command."
-      box:
-        no_installed_boxes: "There are no installed boxes! Use `vagrant box add` to add some."
-        remove_in_use_query: |-
-          Box '%{name}' (v%{version}) with provider '%{provider}' appears
-          to still be in use by at least one Vagrant environment. Removing
-          the box could corrupt the environment. We recommend destroying
-          these environments first:
-
-          %{users}
-
-          Are you sure you want to remove this box? [y/N]
-        removing: |-
-          Removing box '%{name}' (v%{version}) with provider '%{provider}'...
-      destroy:
-        confirmation: "Are you sure you want to destroy the '%{name}' VM? [y/N] "
-        will_not_destroy: |-
-          The VM '%{name}' will not be destroyed, since the confirmation
-          was declined.
-      init:
-        success: |-
-          A `Vagrantfile` has been placed in this directory. You are now
-          ready to `vagrant up` your first virtual environment! Please read
-          the comments in the Vagrantfile as well as documentation on
-          `vagrantup.com` for more information on using Vagrant.
-      plugin:
-        expunge_confirm: |-
-
-          This command permanently deletes all currently installed user plugins. It
-          should only be used when a repair command is unable to properly fix the
-          system.
-
-          Continue?
-        expunge_request_reinstall: |-
-          Would you like Vagrant to attempt to reinstall current plugins?
-        expunge_complete: |-
-
-          All user installed plugins have been removed from this Vagrant environment!
-        expunge_reinstall: |-
-
-          Vagrant will now attempt to reinstall user plugins that were removed.
-        expunge_aborted: |-
-
-          Vagrant expunge has been declined. Skipping removal of plugins.
-        installed_license: |-
-          The license for '%{name}' was successfully installed!
-        installing_license: |-
-          Installing license for '%{name}'...
-        no_plugins: |-
-          No plugins installed.
-        plugin_require: "  - Custom entrypoint: %{require}"
-        plugin_version: "  - Version Constraint: %{version}"
-        installed: |-
-          Installed the plugin '%{name} (%{version})'!
-        installing: |-
-          Installing the '%{name}' plugin. This can take a few minutes...
-        uninstalling: |-
-          Uninstalling the '%{name}' plugin...
-        up_to_date: |-
-          All plugins are up to date.
-        updated: |-
-          Updated '%{name}' to version '%{version}'!
-        updating: |-
-          Updating installed plugins...
-        updating_specific: |-
-          Updating plugins: %{names}. This may take a few minutes...
-        post_install: |-
-          Post install message from the '%{name}' plugin:
-
-          %{message}
-        repairing: |-
-          Repairing currently installed plugins. This may take a few minutes...
-        repair_complete: |-
-          Installed plugins successfully repaired!
-        repair_failed: |-
-          Failed to automatically repair installed Vagrant plugins. To fix this
-          problem remove all user installed plugins and reinstall. Vagrant can
-          do this for you automatically by running the following command:
-
-            vagrant plugin expunge --reinstall
-
-          Failure message received during repair:
-
-          %{message}
-      snapshot:
-        not_supported: |-
-          This provider doesn't support snapshots.
-
-          This may be intentional or this may be a bug. If this provider
-          should support snapshots, then please report this as a bug to the
-          maintainer of the provider.
-        no_push_snapshot: |-
-          No pushed snapshot found!
-
-          Use `vagrant snapshot push` to push a snapshot to restore to.
-      status:
-        aborted: |-
-          The VM is in an aborted state. This means that it was abruptly
-          stopped without properly closing the session. Run `vagrant up`
-          to resume this virtual machine. If any problems persist, you may
-          have to destroy and restart the virtual machine.
-        gurumeditation: |-
-          The VM is in the "guru meditation" state. This is a rare case which means
-          that an internal error in VitualBox caused the VM to fail. This is always
-          the sign of a bug in VirtualBox. You can try to bring your VM back online
-          with a `vagrant up`.
-        inaccessible: |-
-          The VM is inaccessible! This is a rare case which means that VirtualBox
-          can't find your VM configuration. This usually happens when upgrading
-          VirtualBox, moving to a new computer, etc. Please consult VirtualBox
-          for how to handle this issue.
-        output: |-
-          Current machine states:
-
-          %{states}
-
-          %{message}
-        not_created: |-
-          The environment has not yet been created. Run `vagrant up` to
-          create the environment. If a machine is not created, only the
-          default provider will be shown. So if a provider is not listed,
-          then the machine is not created for that environment.
-        paused: |-
-          The VM is paused. This VM may have been paused via the VirtualBox
-          GUI or the VBoxManage command line interface. To unpause, please
-          use the VirtualBox GUI and/or VBoxManage command line interface so
-          that vagrant would be able to control the VM again.
-        poweroff: |-
-          The VM is powered off. To restart the VM, simply run `vagrant up`
-        stopping: |-
-          The VM is stopping.
-        running: |-
-          The VM is running. To stop this VM, you can run `vagrant halt` to
-          shut it down forcefully, or you can run `vagrant suspend` to simply
-          suspend the virtual machine. In either case, to restart it again,
-          simply run `vagrant up`.
-        saving: |-
-          The VM is currently saving its state. In a few moments this state
-          should transition to "saved." Please run `vagrant status` again
-          in a few seconds.
-        saved: |-
-          To resume this VM, simply run `vagrant up`.
-        stuck: |-
-          The VM is "stuck!" This is a very rare state which means that
-          VirtualBox is unable to recover the current state of the VM.
-          The only known solution to this problem is to restart your
-          machine, sorry.
-        listing: |-
-          This environment represents multiple VMs. The VMs are all listed
-          above with their current state. For more information about a specific
-          VM, run `vagrant status NAME`.
-      up:
-        upping: |-
-          Bringing machine '%{name}' up with '%{provider}' provider...
-      validate:
-        success: |-
-          Vagrantfile validated successfully.
-
-#-------------------------------------------------------------------------------
-# Translations for Vagrant middleware actions
-#-------------------------------------------------------------------------------
-    actions:
-      runner:
-        waiting_cleanup: "Waiting for cleanup before exiting..."
-        exit_immediately: "Exiting immediately, without cleanup!"
-      vm:
-        boot:
-          booting: Booting VM...
-        bridged_networking:
-          available: |-
-            Available bridged network interfaces:
-          bridging: |-
-            Bridging adapter #%{adapter} to '%{bridge}'
-          enabling: |-
-            Enabling bridged network...
-          preparing: |-
-            Preparing bridged networking...
-          choice_help: |-
-            When choosing an interface, it is usually the one that is
-            being used to connect to the internet.
-          specific_not_found: |-
-            Specific bridge '%{bridge}' not found. You may be asked to specify
-            which network to bridge to.
-        check_box:
-          not_found: |-
-            Box '%{name}' was not found. Fetching box from specified URL for
-            the provider '%{provider}'. Note that if the URL does not have
-            a box for this provider, you should interrupt Vagrant now and add
-            the box yourself. Otherwise Vagrant will attempt to download the
-            full box prior to discovering this error.
-        check_guest_additions:
-          not_detected: |-
-            No guest additions were detected on the base box for this VM! Guest
-            additions are required for forwarded ports, shared folders, host only
-            networking, and more. If SSH fails on this machine, please install
-            the guest additions and repackage the box to continue.
-
-            This is not an error message; everything may continue to work properly,
-            in which case you may ignore this message.
-          version_mismatch: |-
-            The guest additions on this VM do not match the installed version of
-            VirtualBox! In most cases this is fine, but in rare cases it can
-            prevent things such as shared folders from working properly. If you see
-            shared folder errors, please make sure the guest additions within the
-            virtual machine match the version of VirtualBox you have installed on
-            your host and reload your VM.
-
-            Guest Additions Version: %{guest_version}
-            VirtualBox Version: %{virtualbox_version}
-        clear_forward_ports:
-          deleting: Clearing any previously set forwarded ports...
-        clear_network_interfaces:
-          deleting: Clearing any previously set network interfaces...
-        clear_shared_folders:
-          deleting: Cleaning previously set shared folders...
-        clone:
-          setup_master: Preparing master VM for linked clones...
-          setup_master_detail: |-
-            This is a one time operation. Once the master VM is prepared,
-            it will be used as a base for linked clones, making the creation
-            of new VMs take milliseconds on a modern system.
-          creating: Cloning VM...
-          failure: Creation of the linked clone failed.
-          create_master:
-            failure: |-
-              Failed to create lock-file for master VM creation for box %{box}.
-        customize:
-          failure: |-
-            A customization command failed:
-
-            %{command}
-
-            The following error was experienced:
-
-            %{error}
-
-            Please fix this customization and try again.
-          running: Running '%{event}' VM customizations...
-        destroy:
-          destroying: Destroying VM and associated drives...
-        destroy_network:
-          destroying: Destroying unused networking interface...
-        disable_networks:
-          disabling: Disabling host only networks...
-        discard_state:
-          discarding: Discarding saved state of VM...
-        export:
-          create_dir: Creating temporary directory for export...
-          exporting: Exporting VM...
-          power_off: "The Vagrant virtual environment you are trying to package must be powered off."
-        forward_ports:
-          auto_empty: |-
-            Vagrant found a port collision for the specified port and virtual machine.
-            While this port was marked to be auto-corrected, the ports in the
-            auto-correction range are all also used.
-
-            VM: %{vm_name}
-            Forwarded port: %{guest_port} => %{host_port}
-          collision_error: |-
-            Vagrant cannot forward the specified ports on this VM, since they
-            would collide with some other application that is already listening
-            on these ports. The forwarded port to %{host_port} is already in use
-            on the host machine.
-
-            To fix this, modify your current project's Vagrantfile to use another
-            port. Example, where '1234' would be replaced by a unique host port:
-
-              config.vm.network :forwarded_port, guest: %{guest_port}, host: 1234
-
-            Sometimes, Vagrant will attempt to auto-correct this for you. In this
-            case, Vagrant was unable to. This is usually because the guest machine
-            is in a state which doesn't allow modifying port forwarding. You could
-            try 'vagrant reload' (equivalent of running a halt followed by an up)
-            so vagrant can attempt to auto-correct this upon booting. Be warned
-            that any unsaved work might be lost.
-
-          fixed_collision: |-
-            Fixed port collision for %{guest_port} => %{host_port}. Now on port %{new_port}.
-          forwarding: Forwarding ports...
-          forwarding_entry: |-
-            %{guest_port} (guest) => %{host_port} (host) (adapter %{adapter})
-          non_nat: |-
-            VirtualBox adapter #%{adapter} not configured as "NAT". Skipping port
-            forwards on this adapter.
-          privileged_ports: |-
-            You are trying to forward to privileged ports (ports <= 1024). Most
-            operating systems restrict this to only privileged process (typically
-            processes running as an administrative user). This is a warning in case
-            the port forwarding doesn't work. If any problems occur, please try a
-            port higher than 1024.
-        halt:
-          force: |-
-            Forcing shutdown of VM...
-          graceful: |-
-            Attempting graceful shutdown of VM...
-          guest_not_ready: |-
-            Guest communication could not be established! This is usually because
-            SSH is not running, the authentication information was changed,
-            or some other networking issue. Vagrant will force halt, if
-            capable.
-        hostname:
-          setting: "Setting hostname..."
-        import:
-          importing: Importing base box '%{name}'...
-          failure: |-
-            The VM import failed! Try running `VBoxManage import` on the box file
-            manually for more verbose error output.
-        match_mac:
-          matching: Matching MAC address for NAT networking...
-          no_base_mac: |-
-            No base MAC address was specified. This is required for the NAT networking
-            to work properly (and hence port forwarding, SSH, etc.). Specifying this
-            MAC address is typically up to the box and box maintainer. Please contact
-            the relevant person to solve this issue.
-        network:
-          configuring: |-
-            Configuring and enabling network interfaces...
-          dhcp_already_attached: |-
-            A host only network interface you're attempting to configure via DHCP
-            already has a conflicting host only adapter with DHCP enabled. The
-            DHCP on this adapter is incompatible with the DHCP settings. Two
-            host only network interfaces are not allowed to overlap, and each
-            host only network interface can have only one DHCP server. Please
-            reconfigure your host only network or remove the virtual machine
-            using the other host only network.
-          preparing: |-
-            Preparing network interfaces based on configuration...
-          cleanup_vbox_default_dhcp: |-
-            Found default DHCP server from initial VirtualBox install. Cleaning it up...
-        host_only_network:
-          collides: |-
-            The specified host network collides with a non-hostonly network!
-            This will cause your specified IP to be inaccessible. Please change
-            the IP or name of your host only network so that it no longer matches that of
-            a bridged or non-hostonly network.
-          creating: "Creating new host only network for environment..."
-          enabling: "Enabling host only network..."
-          not_found: |-
-            The specified host network could not be found: '%{name}.'
-            If the name specification is removed, Vagrant will create a new
-            host only network for you. Alternatively, please create the
-            specified network manually.
-          preparing: "Preparing host only network..."
-        nfs:
-          exporting: Exporting NFS shared folders...
-          installing: "Installing NFS client..."
-          mounting: Mounting NFS shared folders...
-          v4_with_udp_warning: |-
-
-            WARNING: Invalid NFS settings detected!
-
-            Detected UDP enabled with NFSv4. NFSv4 does not support UDP.
-            If folder mount fails disable UDP using the following option:
-
-              nfs_udp: false
-
-            For more information see:
-            RFC5661: https://tools.ietf.org/html/rfc5661#section-2.9.1
-            RFC7530: https://tools.ietf.org/html/rfc7530#section-3.1
-
-        provision:
-          beginning: "Running provisioner: %{provisioner}..."
-          disabled_by_config: |-
-            Machine not provisioned because `--no-provision` is specified.
-          disabled_by_sentinel: |-
-            Machine already provisioned. Run `vagrant provision` or use the `--provision`
-            flag to force provisioning. Provisioners marked to run always will still run.
-        resume:
-          resuming: Resuming suspended VM...
-          unpausing: |-
-            Unpausing the VM...
-        share_folders:
-          creating: Creating shared folders metadata...
-          mounting: Mounting shared folders...
-          mounting_entry: "%{guestpath} => %{hostpath}"
-          nomount_entry: "Automounting disabled: %{hostpath}"
-        set_name:
-          setting_name: |-
-            Setting the name of the VM: %{name}
-        snapshot:
-          deleting: |-
-            Deleting the snapshot '%{name}'...
-          deleted: |-
-            Snapshot deleted!
-          list_none: |-
-            No snapshots have been taken yet!
-          list_none_detail: |-
-            You can take a snapshot using `vagrant snapshot save`. Note that
-            not all providers support this yet. Once a snapshot is taken, you
-            can list them using this command, and use commands such as
-            `vagrant snapshot restore` to go back to a certain snapshot.
-          restoring: |-
-            Restoring the snapshot '%{name}'...
-          saving: |-
-            Snapshotting the machine as '%{name}'...
-          saved: |-
-            Snapshot saved! You can restore the snapshot at any time by
-            using `vagrant snapshot restore`. You can delete it using
-            `vagrant snapshot delete`.
-        suspend:
-          suspending: Saving VM state and suspending execution...
-
-      box:
-        unpackage:
-          untar_failure: |-
-            The box failed to unpackage properly. Please verify that the box
-            file you're trying to add is not corrupted and that enough disk space
-            is available and then try again.
-            The output from attempting to unpackage (if any):
-
-            %{output}
-        add:
-          adding: |-
-            Extracting box...
-          checksumming: |-
-            Calculating and comparing box checksum...
-        destroy:
-          destroying: "Deleting box '%{name}'..."
-        download:
-          cleaning: "Cleaning up downloaded box..."
-          download_failed: |-
-            Download failed. Will try another box URL if there is one.
-          interrupted: "Box download was interrupted. Exiting."
-          resuming: "Box download is resuming from prior download progress"
-        verify:
-          verifying: "Verifying box..."
-          failed: |-
-            The box file you're attempting to add is invalid. This can be
-            commonly attributed to typos in the path given to the box add
-            command. Another common case of this is invalid packaging of the
-            box itself.
-
-      general:
-        package:
-          packaging: "Packaging additional file: %{file}"
-          compressing: "Compressing package to: %{fullpath}"
-          output_exists: |-
-            The specified file '%{filename}' to save the package as already exists. Please
-            remove this file or specify a different file name for outputting.
-          output_is_directory: |-
-            The specified output is a directory. Please specify a path including
-            a filename.
-          requires_directory: |-
-            A directory was not specified to package. This should never happen
-            and is a result of an internal inconsistency. Please report a bug
-            on the Vagrant bug tracker.
-          include_file_missing: |-
-            Package include file doesn't exist: %{file}
-
-    hosts:
-      bsd:
-        nfs_export: |-
-          Preparing to edit /etc/exports. Administrator privileges will be required...
-        nfs_prune: |-
-          Pruning invalid NFS exports. Administrator privileges will be required...
-      darwin:
-        virtualbox_install_download: |-
-          Downloading VirtualBox %{version}...
-        virtualbox_install_detail: |-
-          This may not be the latest version of VirtualBox, but it is a version
-          that is known to work well. Over time, we'll update the version that
-          is installed.
-        virtualbox_install_install: |-
-          Installing VirtualBox. This will take a few minutes...
-        virtualbox_install_install_detail: |-
-          You may be asked for your administrator password during this time.
-          If you're uncomfortable entering your password here, please install
-          VirtualBox manually.
-        virtualbox_install_success: |-
-          VirtualBox has successfully been installed!
-      linux:
-        nfs_export: |-
-          Preparing to edit /etc/exports. Administrator privileges will be required...
-        nfs_prune: |-
-          Pruning invalid NFS exports. Administrator privileges will be required...
-      arch:
-        nfs_export:
-          prepare: "Preparing to edit /etc/exports. Administrator privileges will be required..."
-      windows:
-        virtualbox_install_download: |-
-          Downloading VirtualBox %{version}...
-        virtualbox_install_detail: |-
-          This may not be the latest version of VirtualBox, but it is a version
-          that is known to work well. Over time, we'll update the version that
-          is installed.
-        virtualbox_install_install: |-
-          Installing VirtualBox. This will take a few minutes...
-        virtualbox_install_install_detail: |-
-          A couple pop-ups will occur during this installation process to
-          ask for admin privileges as well as to install Oracle drivers.
-          Please say yes to both. If you're uncomfortable with this, please
-          install VirtualBox manually.
-        virtualbox_install_success: |-
-          VirtualBox has successfully been installed!
-
-    provisioners:
-      chef:
-        chef_not_detected: |-
-          The chef binary (either `chef-solo` or `chef-client`) was not found on
-          the VM and is required for chef provisioning. Please verify that chef
-          is installed and that the binary is available on the PATH.
-        cookbook_folder_not_found_warning:
-          "The cookbook path '%{path}' doesn't exist. Ignoring..."
-        json: "Generating chef JSON and uploading..."
-        client_key_folder: "Creating folder to hold client key..."
-        generating_node_name: |-
-          Auto-generating node name for Chef...
-        using_hostname_node_name: |-
-          Using hostname "%{hostname}" as node name for Chef...
-        install_failed: |-
-          Vagrant could not detect Chef on the guest! Even after Vagrant
-          attempted to install Chef, it could still not find Chef on the system.
-          Please make sure you are connected to the Internet and can access
-          Chef's package distribution servers. If you already have Chef
-          installed on this guest, you can disable the automatic Chef detection
-          by setting the 'install' option in the Chef configuration section of
-          your Vagrantfile:
-
-              chef.install = false
-        log_level_empty: |-
-          The Chef provisioner requires a log level. If you did not set a
-          log level, this is probably a bug and should be reported.
-        upload_validation_key: "Uploading chef client validation key..."
-        upload_encrypted_data_bag_secret_key: "Uploading chef encrypted data bag secret key..."
-        recipe_empty: |-
-          Chef Apply provisioning requires that the `config.chef.recipe` be set
-          to a string containing the recipe contents you want to execute on the
-          guest.
-        running_client: "Running chef-client..."
-        running_client_again: "Running chef-client again (failed to converge)..."
-        running_apply: "Running chef-apply..."
-        running_solo: "Running chef-solo..."
-        running_solo_again: "Running chef-solo again (failed to converge)..."
-        running_zero: "Running chef-client (local-mode)..."
-        running_zero_again: "Running chef-client (local-mode) again (failed to converge)..."
-        missing_shared_folders: |-
-          Shared folders that Chef requires are missing on the virtual machine.
-          This is usually due to configuration changing after already booting the
-          machine. The fix is to run a `vagrant reload` so that the proper shared
-          folders will be prepared and mounted on the VM.
-        no_convergence: |-
-          Chef never successfully completed! Any errors should be visible in the
-          output above. Please fix your recipes so that they properly complete.
-        not_detected: |-
-          The `%{binary}` binary appears not to be in the PATH of the guest. This
-          could be because the PATH is not properly setup or perhaps chef is not
-          installed on this guest. Chef provisioning can not continue without
-          chef properly installed.
-        server_url_required: |-
-          Chef server provisioning requires that the `config.chef.chef_server_url` be set to the
-          URL of your chef server. Examples include "http://12.12.12.12:4000" and
-          "http://myserver.com:4000" (the port of course can be different, but 4000 is the default)
-        server_validation_key_required: |-
-          Chef server provisioning requires that the `config.chef.validation_key_path` configuration
-          be set to a path on your local machine of the validation key used to register the
-          VM with the chef server.
-        server_validation_key_doesnt_exist: |-
-          The validation key set for `config.chef.validation_key_path` does not exist! This
-          file needs to exist so it can be uploaded to the virtual machine.
-        upload_path_empty: |-
-          The Chef Apply provisioner requires that the `config.chef.upload_path`
-          be set to a non-nil, non-empty value.
-        missing_node_name: |-
-          The Chef Client provisioner cannot delete the %{deletable} from
-          the Chef server because Vagrant does not know the `node_name'! You
-          need to manually delete the %{deletable} from the Chef server. You
-          can specify the `node_name' in the Chef configuration to prevent this
-          in the future.
-        deleting_from_server: "Deleting %{deletable} \"%{name}\" from Chef server..."
-
-      file:
-        no_dest_file: "File destination must be specified."
-        no_source_file: "File source must be specified."
-        path_invalid: "File upload source file %{path} must exist"
-
-      puppet:
-        not_detected: |-
-          The `%{binary}` binary appears not to be in the PATH of the guest. This
-          could be because the PATH is not properly setup or perhaps Puppet is not
-          installed on this guest. Puppet provisioning can not continue without
-          Puppet properly installed.
-        running_puppet: "Running Puppet with %{manifest}..."
-        running_puppet_env: "Running Puppet with environment %{environment}..."
-        manifest_missing: |-
-          The configured Puppet manifest is missing. Please specify a path to an
-          existing manifest:
-
-          %{manifest}
-        environment_missing: |-
-          The configured Puppet environment folder %{environment} was not found in the
-          specified environmentpath %{environmentpath}.
-          Please specify a path to an existing Puppet directory environment.
-        environment_path_missing: "The environment path specified for Puppet does not exist: %{path}"
-        manifests_path_missing: "The manifests path specified for Puppet does not exist: %{path}"
-        missing_shared_folders: |-
-          Shared folders that Puppet requires are missing on the virtual machine.
-          This is usually due to configuration changing after already booting the
-          machine. The fix is to run a `vagrant reload` so that the proper shared
-          folders will be prepared and mounted on the VM.
-        module_path_missing: "The configured module path doesn't exist: %{path}"
-
-      puppet_server:
-        cert_requires_node: |-
-          "puppet_node" is required when a client cert or key is specified
-        client_cert_and_private_key: |-
-          Both a client certificate and private key must be specified, if any
-        client_cert_not_found: |-
-          The specified client cert path could not be found
-        client_private_key_not_found: |-
-          The specified client private key path could not be found
-        not_detected: |-
-          The `%{binary}` binary appears not to be in the PATH of the guest. This
-          could be because the PATH is not properly setup or perhaps Puppet is not
-          installed on this guest. Puppet provisioning can not continue without
-          Puppet properly installed.
-        running_puppetd: "Running Puppet agent..."
-        uploading_client_cert: |-
-          Uploading client certificate and private key...
-
-      shell:
-        args_bad_type: "Shell provisioner `args` must be a string or array."
-        invalid_encoding: |-
-          Invalid encoding '%{actual}' for script at '%{path}'.
-          Must be '%{default}' or UTF-8.
-        env_must_be_a_hash: |-
-          The shell provisioner's `env' option must be a hash.
-        no_path_or_inline: "One of `path` or `inline` must be set."
-        path_and_inline_set: "Only one of `path` or `inline` may be set."
-        path_invalid: "`path` for shell provisioner does not exist on the host system: %{path}"
-        running: "Running: %{script}"
-        runningas: "Running: %{local} as %{remote}"
-        upload_path_not_set: "`upload_path` must be set for the shell provisioner."
-        interactive_not_elevated: "To be interactive, it must also be privileged."
-
-      ansible:
-        ansible_host_pattern_detected: |-
-          Vagrant has detected a host range pattern in the `groups` option.
-          Vagrant doesn't fully check the validity of these parameters!
-
-          Please check https://docs.ansible.com/ansible/intro_inventory.html#hosts-and-groups
-          for more information.
-        cannot_detect: |-
-          Vagrant does not support detecting whether Ansible is installed
-          for the guest OS running in the machine. Vagrant will assume it is
-          installed and attempt to continue.
-
-          If you'd like this provisioner to be improved, please
-          take a look at the Vagrant source code linked below and try
-          to contribute back support. Thank you!
-
-          https://github.com/mitchellh/vagrant
-        errors:
-          ansible_command_failed: |-
-            Ansible failed to complete successfully. Any error output should be
-            visible above. Please fix these errors and try again.
-          ansible_not_found_on_guest: |-
-            The Ansible software could not be found! Please verify
-            that Ansible is correctly installed on your guest system.
-
-            If you haven't installed Ansible yet, please install Ansible
-            on your Vagrant basebox, or enable the automated setup with the
-            `install` option of this provisioner. Please check
-            https://docs.vagrantup.com/v2/provisioning/ansible_local.html
-            for more information.
-          ansible_not_found_on_host: |-
-            The Ansible software could not be found! Please verify
-            that Ansible is correctly installed on your host system.
-
-            If you haven't installed Ansible yet, please install Ansible
-            on your host system. Vagrant can't do this for you in a safe and
-            automated way.
-            Please check https://docs.ansible.com for more information.
-          cannot_support_pip_install: |-
-            Unfortunately Vagrant does not support yet installing Ansible
-            from pip for the guest OS running in the machine.
-
-            If you'd like this provisioner to be improved, please
-            take a look at the Vagrant source code linked below and try
-            to contribute back support. Thank you!
-
-            https://github.com/mitchellh/vagrant
-          ansible_version_not_found_on_guest: |-
-            The requested Ansible version (%{required_version}) was not found on the guest.
-            Please check the ansible installation on your guest system,
-            or adapt the `version` option of this provisioner in your Vagrantfile.
-            See https://docs.vagrantup.com/v2/provisioning/ansible_local.html
-            for more information.
-          config_file_not_found: |-
-            `%{config_option}` does not exist on the %{system}: %{path}
-          extra_vars_invalid: |-
-            `extra_vars` must be a hash or a path to an existing file. Received: %{value} (as %{type})
-          no_playbook: |-
-            `playbook` file path must be set.
-          raw_arguments_invalid: |-
-            `raw_arguments` must be an array of strings. Received: %{value} (as %{type})
-          raw_ssh_args_invalid: |-
-            `raw_ssh_args` must be an array of strings. Received: %{value} (as %{type})
-        installing: "Installing Ansible..."
-        installing_pip: "Installing pip... (for Ansible installation)"
-        running_galaxy: "Running ansible-galaxy..."
-        running_playbook: "Running ansible-playbook..."
-        windows_not_supported_for_control_machine: |-
-          Windows is not officially supported for the Ansible Control Machine.
-          Please check https://docs.ansible.com/intro_installation.html#control-machine-requirements
-
-      docker:
-        not_running: "Docker is not running on the guest VM."
-        install_failed: "Docker installation failed."
-
-      salt:
-        minion_config_nonexist: |-
-          The specified minion_config '%{missing_config_file}' file could not be found.
-        master_config_nonexist: |-
-          The specified master_config '%{missing_config_file}' file could not be found.
-        grains_config_nonexist: |-
-          The specified grains_config file could not be found.
-        missing_key: |-
-          You must include both public and private keys.
-        must_accept_keys: |-
-          You must accept keys when running highstate with master!
-
-    pushes:
-      file:
-        no_destination: "File destination must be specified."