vagrant-aws-detiber 0.7.2.pre.2

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/locales/guest_windows.yml

@@ -0,0 +1,23 @@
+en:
+  vagrant_windows:
+    errors:
+      public_key_directory_failure: |-
+        Vagrant failed to properly discover the correct paths for the
+        temporary directory and user profile directory on the Windows
+        guest. Please ensure the guest is properly configured.
+      network_winrm_required: |-
+        Configuring networks on Windows requires the communicator to be
+        set to WinRM. To do this, add the following to your Vagrantfile:
+
+          config.vm.communicator = "winrm"
+
+        Note that the Windows guest must be configured to accept insecure
+        WinRM connections, and the WinRM port must be forwarded properly from
+        the guest machine. This is not always done by default.
+      rename_computer_failed: |-
+        Renaming the Windows guest failed. Most often this is because you've
+        specified a FQDN instead of just a host name.
+
+        Ensure the new guest name is properly formatted. Standard names may
+        contain letters (a-z, A-Z), numbers (0-9), and hypens (-), but no
+        spaces or periods (.). The name may not consist entirely of digits.

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/locales/providers_docker.yml

@@ -0,0 +1,234 @@
+en:
+  docker_provider:
+    already_built: |-
+      Image is already built from the Dockerfile. `vagrant reload` to rebuild.
+    build_image_destroy: |-
+      Removing built image...
+    build_image_destroy_in_use: |-
+      Build image couldn't be destroyed because the image is in use. The
+      image must be destroyed manually in the future if you want to remove
+      it.
+    build_image_invalid: |-
+      Build image no longer exists. Rebuilding...
+    building: |-
+      Building the container from a Dockerfile...
+    building_named_dockerfile: |-
+      Building the container from the named Dockerfile: %{file}...
+    creating: |-
+      Creating the container...
+    created: |-
+      Container created: %{id}
+    host_machine_disabling_folders: |-
+      Removing synced folders...
+    host_machine_forwarded_ports: |-
+      Warning: When using a remote Docker host, forwarded ports will NOT be
+      immediately available on your machine. They will still be forwarded on
+      the remote machine, however, so if you have a way to access the remote
+      machine, then you should be able to access those ports there. This is
+      not an error, it is only an informational message.
+    host_machine_needed: |-
+      Docker host is required. One will be created if necessary...
+    host_machine_ready: |-
+      Docker host VM is already ready.
+    host_machine_starting: |-
+      Vagrant will now create or start a local VM to act as the Docker
+      host. You'll see the output of the `vagrant up` for this VM below.
+    host_machine_syncing_folders: |-
+      Syncing folders to the host VM...
+    logging_in: |-
+      Logging in to Docker server...
+    logs_host_state_unknown: |-
+      This container requires a host VM, and the state of that VM
+      is unknown. Run `vagrant up` to verify that the container and
+      its host VM is running, then try again.
+    not_created_skip: |-
+      Container not created. Skipping.
+    not_docker_provider: |-
+      Not backed by Docker provider. Skipping.
+    pull: |-
+      Pulling image '%{image}'...
+    run_command_required: |-
+      `vagrant docker-run` requires a command to execute. This command
+      must be specified after a `--` in the command line. This is used
+      to separate possible machine names and options from the actual
+      command to execute. An example is shown below:
+
+        vagrant docker-run web -- rails new .
+
+    running: |-
+      Container is starting. Output will stream in below...
+    running_detached: |-
+      Container is started detached.
+    ssh_through_host_vm: |-
+      SSH will be proxied through the Docker virtual machine since we're
+      not running Docker natively. This is just a notice, and not an error.
+    synced_folders_changed: |-
+      Vagrant has noticed that the synced folder definitions have changed.
+      With Docker, these synced folder changes won't take effect until you
+      destroy the container and recreate it.
+    waiting_for_running: |-
+      Waiting for container to enter "running" state...
+
+    messages:
+      destroying: |-
+        Deleting the container...
+      not_created: |-
+        The container hasn't been created yet.
+      not_created_original: |-
+        The original container hasn't been created yet. Run `vagrant up`
+        for this machine first.
+      not_running: |-
+        The container is not currently running.
+      preparing: |-
+        Preparing to start the container...
+      provision_no_ssh: |-
+        Provisioners will not be run since container doesn't support SSH.
+      will_not_destroy: |-
+        The container will not be destroyed, since the confirmation was declined.
+      starting: |-
+        Starting container...
+      stopping: |-
+        Stopping container...
+      container_ready: |-
+        Container started and ready for use!
+
+    status:
+      host_state_unknown: |-
+        The host VM for the Docker containers appears to not be running
+        or is currently inaccessible. Because of this, we can't determine
+        the state of the containers on that host. Run `vagrant up` to
+        bring up the host VM again.
+      not_created: |-
+        The environment has not yet been created. Run `vagrant up` to
+        create the environment. If a machine is not created, only the
+        default provider will be shown. So if a provider is not listed,
+        then the machine is not created for that environment.
+      preparing: |-
+        Vagrant is preparing to start this Docker container. Run `vagrant up`
+        to continue.
+      running: |-
+        The container is created and running. You can stop it using
+        `vagrant halt`, see logs with `vagrant docker-logs`, and
+        kill/destroy it with `vagrant destroy`.
+      stopped: |-
+        The container is created but not running. You can run it again
+        with `vagrant up`. If the container always goes to "stopped"
+        right away after being started, it is because the command being
+        run exits and doesn't keep running.
+
+    errors:
+      compose_lock_timeout: |-
+        Vagrant enountered a timeout waiting for the docker compose driver
+        to become available. Please try to run your command again. If you
+        continue to experience this error it may be resolved by disabling
+        parallel execution.
+      docker_compose_not_installed: |-
+        Vagrant has been instructed to use to use the Compose driver for the
+        Docker plugin but was unable to locate the `docker-compose` executable.
+        Ensure that `docker-compose` is installed and available on the PATH.
+      not_created: |-
+        The container hasn't been created yet.
+      not_running: |-
+        The container is not currently running.
+      communicator_non_docker: |-
+        The "docker_hostvm" communicator was specified on a machine that
+        is not provided by the Docker provider. This is a bug with your
+        Vagrantfile. Please contact the creator of your Vagrant environment
+        and notify them to not use this communicator for anything except the
+        "docker" provider.
+      config:
+        both_build_and_image: |-
+          Only one of "build_dir" or "image" can be set
+        build_dir_invalid: |-
+          "build_dir" must exist and contain a Dockerfile
+        build_dir_or_image: |-
+          One of "build_dir" or "image" must be set
+        compose_configuration_hash: |-
+          "compose_configuration" must be a hash
+        compose_force_vm: |-
+          Docker compose is not currently supported from within proxy VM.
+        create_args_array: |-
+          "create_args" must be an array
+        invalid_link: |-
+          Invalid link (should be 'name:alias'): "%{link}"
+        invalid_vagrantfile: |-
+          "vagrant_vagrantfile" must point to a Vagrantfile that exists.
+      docker_provider_nfs_without_privileged: |-
+        You've configured a NFS synced folder but didn't enable privileged
+        mode for the container. Please set the `privileged` option to true
+        on the provider block from your Vagrantfile, recreate the container
+        and try again.
+      docker_provider_image_not_configured: |-
+        The base Docker image has not been set for the '%{name}' VM!
+      execute_error: |-
+        A Docker command executed by Vagrant didn't complete successfully!
+        The command run along with the output from the command is shown
+        below.
+
+        Command: %{command}
+
+        Stderr: %{stderr}
+
+        Stdout: %{stdout}
+      exec_command_required: |-
+        The "docker-exec" command requires a command to execute. This command
+        must be specified after a "--" in the command line. This is used to
+        separate machine name and options from the actual command to execute.
+        An example is show below:
+
+          $ vagrant docker-exec -t nginx -- bash
+
+      host_vm_communicator_not_ready: |-
+        The Docker provider was able to bring up the host VM successfully
+        but the host VM is still reporting that SSH is unavailable. This
+        sometimes happens with certain providers due to bugs in the
+        underlying hypervisor, and can be fixed with a `vagrant reload`.
+        The ID for the host VM is shown below for convenience.
+
+        If this does not fix it, please verify that the host VM provider
+        is functional and properly configured.
+
+        Host VM ID: %{id}
+      package_not_supported: |-
+        The "package" command is not supported with the Docker provider.
+        If you'd like to commit or push your Docker container, please SSH
+        into the host VM (if there is one), and run `docker commit` and
+        so on manually.
+      state_not_running: |-
+        The container never entered the "running" state, or entered it
+        briefly but reverted back to another state. Please verify that
+        the configuration of the container is correct.
+
+        If you meant for this container to not remain running, please
+        set the Docker provider configuration "remains_running" to "false":
+
+          config.vm.provider "docker" do |d|
+            d.remains_running = false
+          end
+
+      state_stopped: |-
+        The container started either never left the "stopped" state or
+        very quickly reverted to the "stopped" state. This is usually
+        because the container didn't execute a command that kept it running,
+        and usually indicates a misconfiguration.
+
+        If you meant for this container to not remain running, please
+        set the Docker provider configuration "remains_running" to "false":
+
+          config.vm.provider "docker" do |d|
+            d.remains_running = false
+          end
+
+      suspend_not_supported: |-
+        The "suspend" command is not supported with the Docker provider.
+        Docker containers don't natively support suspend. If you're using
+        a host machine, you can suspend the host machine by finding it
+        in `vagrant global-status` and using `vagrant suspend <id>`.
+      synced_folder_non_docker: |-
+        The "docker" synced folder type can't be used because the  provider
+        in use is not Docker. This synced folder type only works with the
+        Docker provider. The provider this machine is using is: %{provider}
+      vagrantfile_not_found: |-
+        The configured host VM Vagrantfile could not be found. Please fix
+        the Vagrantfile for this Docker environment to point to a valid
+        host VM.

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/locales/providers_hyperv.yml

@@ -0,0 +1,73 @@
+en:
+  vagrant_hyperv:
+    choose_switch: |-
+      Please choose a switch to attach to your Hyper-V instance.
+      If none of these are appropriate, please open the Hyper-V manager
+      to create a new virtual switch.
+    message_already_running: |-
+      Hyper-V instance already running.
+    message_not_created: |-
+      VM not created. Moving on...
+    message_not_running: |-
+      Hyper-V machine isn't running. Can't SSH in!
+
+    errors:
+      admin_required: |-
+        The Hyper-V provider requires that Vagrant be run with
+        administrative privileges. This is a limitation of Hyper-V itself.
+        Hyper-V requires administrative privileges for management
+        commands. Please restart your console with administrative
+        privileges and try again.
+      box_invalid: |-
+        The box you're using with the Hyper-V provider ('%{name}')
+        is invalid. A Hyper-V box should contain both a
+        "Virtual Machines" and a "Virtual Hard Disks" folder that are
+        created as part of exporting a Hyper-V machine.
+
+        Within these directories, Vagrant expects to find the
+        virtual machine configuration as well as the root hard disk.
+
+        The box you're attempting to use is missing one or both of
+        these directories or does not contain the files expected. Verify
+        that you added the correct box. If this problem persists,
+        please contact the creator of the box for assistance.
+      ip_addr_timeout: |-
+        Hyper-V failed to determine your machine's IP address within the
+        configured timeout. Please verify the machine properly booted and
+        the network works. To do this, open the Hyper-V manager, find your
+        virtual machine, and connect to it.
+
+        The most common cause for this error is that the running virtual
+        machine doesn't have the latest Hyper-V integration drivers. Please
+        research for your operating system how to install these in order
+        for the VM to properly communicate its IP address to Hyper-V.
+      no_switches: |-
+        There are no virtual switches created for Hyper-V! Please open
+        the Hyper-V Manager, go to the "Virtual Switch Manager", and create
+        at least one virtual switch.
+
+        A virtual switch is required for Vagrant to create a Hyper-V
+        machine that is connected to a network so it can access it.
+
+        For more help, please see the documentation on the Vagrant website
+        for Hyper-V.
+      powershell_features_disabled: |-
+        The Hyper-V cmdlets for PowerShell are not available! Vagrant
+        requires these to control Hyper-V. Please enable them in the
+        "Windows Features" control panel and try again.
+      powershell_error: |-
+        An error occurred while executing a PowerShell script. This error
+        is shown below. Please read the error message and see if this is
+        a configuration error with your system. If it is not, then please
+        report a bug.
+
+        Script: %{script}
+        Error:
+
+        %{stderr}
+      powershell_required: |-
+        The Vagrant Hyper-V provider requires PowerShell to be available.
+        Please make sure "powershell.exe" is available on your PATH.
+      windows_required: |-
+        The Hyper-V provider only works on Windows. Please try to
+        use another provider.

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/locales/synced_folder_smb.yml

@@ -0,0 +1,95 @@
+en:
+  vagrant_sf_smb:
+    not_supported: |-
+      It appears your machine doesn't support SMB, has not been
+      properly configured for SMB, or there is not an adapter to
+      enable SMB on this machine for Vagrant. Ensure SMB host
+      functionality is available on this machine and try again.
+    mounting: |-
+      Mounting SMB shared folders...
+    mounting_single: |-
+      %{host} => %{guest}
+    preparing: |-
+      Preparing SMB shared folders...
+    warning_password: |-
+      You will be asked for the username and password to use for the SMB
+      folders shortly. Please use the proper username/password of your
+      account.
+    incorrect_credentials: |-
+      Credentials incorrect. Please try again.
+
+    uac:
+      prune_warning: |-
+        Vagrant requires administator access for pruning SMB shares and
+        may request access to complete removal of stale shares.
+      create_warning: |-
+        Vagrant requires administator access to create SMB shares and
+        may request access to complete setup of configured shares.
+    errors:
+      start_failed: |-
+        Vagrant failed to automatically start the SMB service. Ensure the
+        required services can be started and try again.
+
+        Command: %{command}
+
+        Stderr: %{stderr}
+
+        Stdout: %{stdout}
+      credentials_missing: |-
+        Vagrant SMB synced folders require the account password to be stored
+        in an NT compatible format. Please update your sharing settings to
+        enable a Windows compatible password and try again.
+      credentials_request_error: |-
+        Vagrant failed to receive credential information required for preparing
+        an SMB share.
+      define_share_failed: |-
+        Exporting an SMB share failed! Details about the failure are shown
+        below. Please inspect the error message and correct any problems.
+
+        Host path: %{host}
+
+        Stderr: %{stderr}
+
+        Stdout: %{stdout}
+      prune_share_failed: |-
+        Pruning an SMB share failed! Details about the failure are shown
+        below. Please inspect the error message and correct any problems.
+
+        Share name: %{name}
+
+        Stderr: %{stderr}
+
+        Stdout: %{stdout}
+      name_error: |-
+        Vagrant is unable to setup a requested SMB share. An SMB share already
+        exists with the given name.
+
+        Share name: %{name}
+
+        Current path: %{existing_path}
+
+        Requested path: %{path}
+      list_failed: |-
+        Vagrant failed to generate a list of local SMB shares. Please try
+        running the command again.
+      no_routable_host_addr: |-
+        We couldn't detect an IP address that was routable to this
+        machine from the guest machine! Please verify networking is properly
+        setup in the guest machine and that it is able to access this
+        host.
+
+        As another option, you can manually specify an IP for the machine
+        to mount from using the `smb_host` option to the synced folder.
+      powershell_version: |-
+        PowerShell version 3 or later is required for SMB synced folders
+        to work on Windows. You have version: '%{version}'. Please update
+        your PowerShell installation.
+      windows_admin_required: |-
+        SMB shared folders require running Vagrant with administrative
+        privileges. This is a limitation of Windows, since creating new
+        network shares requires admin privileges. Please try again in a
+        console with proper permissions or use another synced folder type.
+      windows_host_required: |-
+        SMB shared folders are only available when Vagrant is running
+        on Windows. The guest machine can be running non-Windows. Please use
+        another synced folder type.

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/nfs/exports.erb

@@ -0,0 +1,5 @@
+# VAGRANT-BEGIN: <%= user %> <%= uuid %>
+<% folders.each do |dirs, opts| %>
+<%= dirs.map { |d| "\"#{d}\"" }.join(" ") %> <%= ips.join(" ") %> <%=opts[:bsd__compiled_nfs_options] %>
+<% end %>
+# VAGRANT-END: <%= user %> <%= uuid %>

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/nfs/exports_freebsd.erb

@@ -0,0 +1,5 @@
+# VAGRANT-BEGIN: <%= user %> <%= uuid %>
+<% folders.each do |dirs, opts| %>
+<%= dirs.map { |d| "#{d}" }.join(" ") %> <%=opts[:bsd__compiled_nfs_options] %> <%= ips.join(" ") %>
+<% end %>
+# VAGRANT-END: <%= user %> <%= uuid %>

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/nfs/exports_linux.erb

@@ -0,0 +1,7 @@
+# VAGRANT-BEGIN: <%= user %> <%= uuid %>
+<% ips.each do |ip| %>
+<% folders.each do |name, opts| %>
+"<%= opts[:hostpath] %>" <%= ip %>(<%= opts[:linux__nfs_options].join(",") %>)
+<% end %>
+<% end %>
+# VAGRANT-END: <%= user %> <%= uuid %>

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/package_Vagrantfile.erb

@@ -0,0 +1,11 @@
+Vagrant::Config.run do |config|
+  # This Vagrantfile is auto-generated by `vagrant package` to contain
+  # the MAC address of the box. Custom configuration should be placed in
+  # the actual `Vagrantfile` in this box.
+  config.vm.base_mac = "<%= base_mac %>"
+end
+
+# Load include vagrant file if it exists after the auto-generated
+# so it can override any of the settings
+include_vagrantfile = File.expand_path("../include/_Vagrantfile", __FILE__)
+load include_vagrantfile if File.exist?(include_vagrantfile)

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/provisioners/chef_client/client.erb

@@ -0,0 +1,41 @@
+log_level          <%= log_level.inspect %>
+log_location       STDOUT
+verbose_logging    <%= verbose_logging.inspect %>
+<% if node_name %>
+node_name          "<%= node_name %>"
+<% end %>
+ssl_verify_mode    :verify_none
+chef_server_url    "<%= chef_server_url %>"
+
+validation_client_name "<%= validation_client_name %>"
+validation_key         "<%= validation_key %>"
+client_key             "<%= client_key %>"
+
+encrypted_data_bag_secret <%= encrypted_data_bag_secret.inspect %>
+
+<% if environment %>
+environment        "<%= environment %>"
+<% end %>
+
+file_cache_path    "<%= file_cache_path %>"
+file_backup_path   "<%= file_backup_path %>"
+
+http_proxy <%= http_proxy.inspect %>
+http_proxy_user <%= http_proxy_user.inspect %>
+http_proxy_pass <%= http_proxy_pass.inspect %>
+https_proxy <%= https_proxy.inspect %>
+https_proxy_user <%= https_proxy_user.inspect %>
+https_proxy_pass <%= https_proxy_pass.inspect %>
+no_proxy <%= no_proxy.inspect %>
+
+pid_file           "/var/run/chef/chef-client.pid"
+
+Mixlib::Log::Formatter.show_time = true
+
+<% if formatter %>
+add_formatter "<%= formatter %>"
+<% end %>
+
+<% if custom_configuration -%>
+Chef::Config.from_file "<%= custom_configuration %>"
+<% end -%>

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/provisioners/chef_solo/solo.erb

@@ -0,0 +1,52 @@
+<% if node_name %>
+node_name "<%= node_name %>"
+<% end %>
+file_cache_path    "<%= file_cache_path %>"
+file_backup_path   "<%= file_backup_path %>"
+cookbook_path <%= cookbooks_path.inspect %>
+<% if roles_path && !roles_path.empty? -%>
+role_path <%= roles_path.size == 1 ? roles_path.first.inspect : roles_path.inspect %>
+<% end -%>
+log_level <%= log_level.inspect %>
+verbose_logging <%= verbose_logging.inspect %>
+
+encrypted_data_bag_secret <%= encrypted_data_bag_secret.inspect %>
+
+<% if data_bags_path && !data_bags_path.empty? -%>
+data_bag_path <%= data_bags_path.size == 1 ? data_bags_path.first.inspect : data_bags_path.inspect %>
+<% end %>
+
+<% if recipe_url -%>
+recipe_url "<%= recipe_url %>"
+<% end -%>
+
+<% if environments_path && !environments_path.empty? -%>
+environment_path <%= environments_path.inspect %>
+<% end -%>
+
+<% if environment -%>
+environment "<%= environment %>"
+<% end -%>
+
+<% if local_mode -%>
+local_mode true
+<% end -%>
+<% if nodes_path && !nodes_path.empty? -%>
+node_path <%= nodes_path.inspect %>
+<% end -%>
+
+http_proxy <%= http_proxy.inspect %>
+http_proxy_user <%= http_proxy_user.inspect %>
+http_proxy_pass <%= http_proxy_pass.inspect %>
+https_proxy <%= https_proxy.inspect %>
+https_proxy_user <%= https_proxy_user.inspect %>
+https_proxy_pass <%= https_proxy_pass.inspect %>
+no_proxy <%= no_proxy.inspect %>
+
+<% if formatter -%>
+add_formatter "<%= formatter %>"
+<% end %>
+
+<% if custom_configuration -%>
+Chef::Config.from_file "<%= custom_configuration %>"
+<% end -%>

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/provisioners/chef_zero/zero.erb

@@ -0,0 +1,45 @@
+<% if node_name %>
+node_name "<%= node_name %>"
+<% end %>
+file_cache_path    "<%= file_cache_path %>"
+file_backup_path   "<%= file_backup_path %>"
+cookbook_path <%= cookbooks_path.inspect %>
+<% if roles_path %>
+role_path <%= roles_path.size == 1 ? roles_path.first.inspect : roles_path.inspect %>
+<% end %>
+log_level <%= log_level.inspect %>
+verbose_logging <%= verbose_logging.inspect %>
+
+<% if !enable_reporting %>
+enable_reporting <%= enable_reporting.inspect %>
+<% end %>
+
+encrypted_data_bag_secret <%= encrypted_data_bag_secret.inspect %>
+
+<% if data_bags_path -%>
+data_bag_path <%= data_bags_path.size == 1 ? data_bags_path.first.inspect : data_bags_path.inspect %>
+<% end %>
+
+<% if environments_path %>
+environment_path <%= environments_path.inspect %>
+<% end -%>
+
+<% if environment %>
+environment "<%= environment %>"
+<% end -%>
+
+<% if local_mode -%>
+chef_zero.enabled true
+local_mode true
+<% end -%>
+<% if nodes_path -%>
+node_path <%= nodes_path.inspect %>
+<% end -%>
+
+<% if formatter %>
+add_formatter "<%= formatter %>"
+<% end %>
+
+<% if custom_configuration -%>
+Chef::Config.from_file "<%= custom_configuration %>"
+<% end -%>

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/templates/rgloader.rb

@@ -0,0 +1,9 @@
+# This file loads the proper rgloader/loader.rb file that comes packaged
+# with Vagrant so that encoded files can properly run with Vagrant.
+
+if ENV["VAGRANT_INSTALLER_EMBEDDED_DIR"]
+  require File.expand_path(
+    "rgloader/loader", ENV["VAGRANT_INSTALLER_EMBEDDED_DIR"])
+else
+  raise "Encoded files can't be read outside of the Vagrant installer."
+end

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/test/acceptance/base.rb

@@ -0,0 +1,2 @@
+require "vagrant-spec/acceptance"
+require_relative "shared/context_virtualbox"

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/test/acceptance/provider-virtualbox/linked_clone_spec.rb

@@ -0,0 +1,35 @@
+# This tests that VM is up as a linked clone
+shared_examples 'provider/linked_clone' do |provider, options|
+  if !options[:box]
+    raise ArgumentError,
+      "box option must be specified for provider: #{provider}"
+  end
+
+  include_context 'acceptance'
+
+  before do
+    environment.skeleton('linked_clone')
+    assert_execute('vagrant', 'box', 'add', 'box', options[:box])
+  end
+
+  after do
+    assert_execute('vagrant', 'destroy', '--force')
+  end
+
+  it 'creates machine as linked clone' do
+    status('Test: machine is created successfully')
+    result = execute('vagrant', 'up', "--provider=#{provider}")
+    expect(result).to exit_with(0)
+
+    status('Test: master VM is created')
+    expect(result.stdout).to match(/master VM/)
+
+    status('Test: machine is a master VM clone')
+    expect(result.stdout).to match(/Cloning/)
+
+    status('Test: machine is available by ssh')
+    result = execute('vagrant', 'ssh', '-c', 'echo foo')
+    expect(result).to exit_with(0)
+    expect(result.stdout).to match(/foo\n$/)
+  end
+end

data/vendor/bundle/ruby/2.3.0/bundler/gems/vagrant-419afb4dcffe/test/acceptance/provider-virtualbox/network_intnet_spec.rb

@@ -0,0 +1,21 @@
+shared_examples "provider/network/intnet" do |provider, options|
+  if !options[:box]
+    raise ArgumentError,
+      "box option must be specified for provider: #{provider}"
+  end
+
+  include_context "acceptance"
+
+  before do
+    environment.skeleton("network_intnet")
+    assert_execute("vagrant", "box", "add", "box", options[:box])
+    assert_execute("vagrant", "up", "--provider=#{provider}")
+  end
+
+  after do
+    assert_execute("vagrant", "destroy", "--force", log: false)
+  end
+
+  it "properly configures an internal network" do
+  end
+end