urbanopt-scenario 0.3.0.pre1 → 0.4.3

data/lib/urbanopt/scenario/default_reports/construction_cost.rb

@@ -1,169 +0,0 @@
-# *********************************************************************************
-# URBANopt, Copyright (c) 2019-2020, Alliance for Sustainable Energy, LLC, and other
-# contributors. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification,
-# are permitted provided that the following conditions are met:
-#
-# Redistributions of source code must retain the above copyright notice, this list
-# of conditions and the following disclaimer.
-#
-# Redistributions in binary form must reproduce the above copyright notice, this
-# list of conditions and the following disclaimer in the documentation and/or other
-# materials provided with the distribution.
-#
-# Neither the name of the copyright holder nor the names of its contributors may be
-# used to endorse or promote products derived from this software without specific
-# prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
-# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-# OF THE POSSIBILITY OF SUCH DAMAGE.
-# *********************************************************************************
-
-require 'json'
-require 'urbanopt/scenario/default_reports/validator'
-require 'json-schema'
-
-module URBANopt
-  module Scenario
-    module DefaultReports
-      ##
-      # ConstructionCost include construction cost information.
-      ##
-      class ConstructionCost
-        attr_accessor :category, :item_name, :unit_cost, :cost_units, :item_quantity, :total_cost # :nodoc:
-        ##
-        # ConstructionCost class intialize all construction_cost attributes:
-        # +:category+ , +:item_name+ , +:unit_cost+ , +:cost_units+ , +:item_quantity+ , +:total_cost+
-        ##
-        # [parameters:]
-        # +hash+ - _Hash_ - A hash which may contain a deserialized construction_cost.
-        ##
-        def initialize(hash = {})
-          hash.delete_if { |k, v| v.nil? }
-          hash = defaults.merge(hash)
-
-          @category = hash[:category]
-          @item_name = hash[:item_name]
-          @unit_cost = hash[:unit_cost]
-          @cost_units = hash[:cost_units]
-          @item_quantity = hash[:item_quantity]
-          @total_cost = hash[:total_cost]
-
-          # initialize class variables @@validator and @@schema
-          @@validator ||= Validator.new
-          @@schema ||= @@validator.schema
-        end
-
-        ##
-        # Assigns default values if attribute values do not exist.
-        ##
-        def defaults
-          hash = {}
-          hash[:category] = nil
-          hash[:item_name] = nil
-          hash[:unit_cost] = nil
-          hash[:cost_units] = nil
-          hash[:item_quantity] = nil
-          hash[:total_cost] = nil
-
-          return hash
-        end
-
-        ##
-        # Converts to a Hash equivalent for JSON serialization.
-        ##
-        # - Exclude attributes with nil values.
-        # - Validate construct_cost hash properties against schema.
-        ##
-        def to_hash
-          result = {}
-          result[:category] = @category if @category
-          result[:item_name] = @item_name if @item_name
-          result[:unit_cost] = @unit_cost if @unit_cost
-          result[:cost_units] = @cost_units if @cost_units
-          result[:item_quantity] = @item_quantity if @item_quantity
-          result[:total_cost] = @total_cost if @total_cost
-
-          # validate construct_cost properties against schema
-          if @@validator.validate(@@schema[:definitions][:ConstructionCost][:properties], result).any?
-            raise "construction_cost properties does not match schema: #{@@validator.validate(@@schema[:definitions][:ConstructionCost][:properties], result)}"
-          end
-
-          return result
-        end
-
-        ##
-        # Merges an +existing_cost+ with a +new_cost+:
-        # - modify the existing_cost by summing the +:total_cost+ and +:item_quantity+ of new_cost and existing_cost.
-        # - raise an error if +:category+ , +:cost_units+ and +:unit_cost+ are not identical
-        ##
-        # [Parameters:]
-        # +existing_cost+ - _ConstructionCost_ - An object of ConstructionCost class.
-        ##
-        # +new_cost+ - _ConstructionCost_ - An object of ConstructionCost class.
-        ##
-        def self.merge_construction_cost(existing_cost, new_cost)
-          # modify the existing_cost by adding the :total_cost and :item_quantity
-          existing_cost.total_cost += new_cost.total_cost
-          existing_cost.item_quantity += new_cost.item_quantity
-
-          if existing_cost.category != new_cost.category
-            raise "Cannot merge existing cost of category \"#{existing_cost.category}\" with new cost of category \"#{new_cost.category}\"."
-          end
-
-          if existing_cost.cost_units != new_cost.cost_units
-            raise "Cannot merge existing cost with cost units \"#{existing_cost.cost_units}\" with new cost with cost units \"#{new_cost.cost_units}\". "
-          end
-
-          if existing_cost.unit_cost != new_cost.unit_cost
-            raise "Cannot merge existing cost with unit cost \"#{existing_cost.unit_cost}\" with new cost with unit cost \"#{new_cost.unit_cost}\"; identical items should have identical unit cost."
-          end
-
-          return existing_cost
-        end
-
-        ##
-        # Merges muliple construction costs together.
-        # - loops over the new_costs and find the index of the cost with identical +:item_name+.
-        # - if +item_name+ is identical then modify the existing_cost array by summing the :total_cost and :item_quantity. Else add the new_cost to existing_costs array.
-        ##
-        # [Parameters:]
-        # +existing_costs+ - _Array_ - An array of ConstructionCost objects.
-        ##
-        # +new_costs+ - _Array_ - An array of ConstructionCost objects.
-        def self.merge_construction_costs(existing_costs, new_costs)
-          item_name_list = []
-          item_name_list = existing_costs.collect(&:item_name)
-
-          new_costs.each do |x_new|
-            if item_name_list.include?(x_new.item_name)
-
-              # when looping over the new_cost item_names find the index of the item_name_list with the same item name
-              id = item_name_list.find_index(x_new.item_name) # the order of the item_name_list is the same as the order of the existing_cost hash-array
-
-              # modify the existing_cost array by adding the :total_cost and :item_quantity when looping over costs
-              existing_costs[id] = merge_construction_cost(existing_costs[id], x_new)
-
-            else
-
-              # insert the new hash in to the array
-              existing_costs << x_new
-
-            end
-          end
-
-          return existing_costs
-        end
-      end
-    end
-  end
-end

data/lib/urbanopt/scenario/default_reports/date.rb

@@ -1,97 +0,0 @@
-# *********************************************************************************
-# URBANopt, Copyright (c) 2019-2020, Alliance for Sustainable Energy, LLC, and other
-# contributors. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification,
-# are permitted provided that the following conditions are met:
-#
-# Redistributions of source code must retain the above copyright notice, this list
-# of conditions and the following disclaimer.
-#
-# Redistributions in binary form must reproduce the above copyright notice, this
-# list of conditions and the following disclaimer in the documentation and/or other
-# materials provided with the distribution.
-#
-# Neither the name of the copyright holder nor the names of its contributors may be
-# used to endorse or promote products derived from this software without specific
-# prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
-# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-# OF THE POSSIBILITY OF SUCH DAMAGE.
-# *********************************************************************************
-
-require 'urbanopt/scenario/default_reports/validator'
-require 'json-schema'
-require 'json'
-
-module URBANopt
-  module Scenario
-    module DefaultReports
-      ##
-      # Date class include information of simulation run date.
-      ##
-      class Date
-        attr_accessor :month, :day_of_month, :year #:nodoc:
-        ##
-        # Date class intialize all date attributes:
-        # +:month+ , +:day_of_month+ , +:year+
-        ##
-        # [parameters:]
-        # +hash+ - _Hash_ - A hash which may contain a deserialized date.
-        ##
-        def initialize(hash = {})
-          hash.delete_if { |k, v| v.nil? }
-          hash = defaults.merge(hash)
-
-          @month = hash[:month].to_i
-          @day_of_month = hash[:day_of_month].to_i
-          @year = hash[:year].to_i
-
-          # initialize class variables @@validator and @@schema
-          @@validator ||= Validator.new
-          @@schema ||= @@validator.schema
-        end
-
-        ##
-        # Converts to a hash equivalent for JSON serialization.
-        ##
-        # - Exclude attributes with nil values.
-        # - Validate date properties against schema.
-        ##
-        def to_hash
-          result = {}
-          result[:month] = @month if @month
-          result[:day_of_month] = @day_of_month if @day_of_month
-          result[:year] = @year if @year
-
-          # validate date hash properties against schema
-          if @@validator.validate(@@schema[:definitions][:Date][:properties], result).any?
-            raise "end_uses properties does not match schema: #{@@validator.validate(@@schema[:definitions][:Date][:properties], result)}"
-          end
-
-          return result
-        end
-
-        ##
-        # Assigns default values if values do not exist.
-        ##
-        def defaults
-          hash = {}
-          hash[:month] = nil
-          hash[:day_of_month] = nil
-          hash[:year] = nil
-
-          return hash
-        end
-      end
-    end
-  end
-end

data/lib/urbanopt/scenario/default_reports/distributed_generation.rb

@@ -1,379 +0,0 @@
-# *********************************************************************************
-# URBANopt, Copyright (c) 2019-2020, Alliance for Sustainable Energy, LLC, and other
-# contributors. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without modification,
-# are permitted provided that the following conditions are met:
-#
-# Redistributions of source code must retain the above copyright notice, this list
-# of conditions and the following disclaimer.
-#
-# Redistributions in binary form must reproduce the above copyright notice, this
-# list of conditions and the following disclaimer in the documentation and/or other
-# materials provided with the distribution.
-#
-# Neither the name of the copyright holder nor the names of its contributors may be
-# used to endorse or promote products derived from this software without specific
-# prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
-# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-# OF THE POSSIBILITY OF SUCH DAMAGE.
-# *********************************************************************************
-
-require 'json'
-require 'urbanopt/scenario/default_reports/solar_pv'
-require 'urbanopt/scenario/default_reports/wind'
-require 'urbanopt/scenario/default_reports/generator'
-require 'urbanopt/scenario/default_reports/storage'
-require 'json-schema'
-
-module URBANopt
-  module Scenario
-    module DefaultReports
-      ##
-      # Onsite distributed generation system (i.e. SolarPV, Wind, Storage, Generator) design attributes and financial metrics.
-      ##
-      class DistributedGeneration
-        ##
-        # _Float_ - Lifecycle costs for the complete distributed generation system in US Dollars
-        #
-        attr_accessor :lcc_us_dollars
-
-        ##
-        # _Float_ - Net present value of the complete distributed generation system in US Dollars
-        #
-        attr_accessor :npv_us_dollars
-
-        ##
-        # _Float_ - Total amount paid for utility energy in US Dollars in the first year of operation
-        #
-        attr_accessor :year_one_energy_cost_us_dollars
-
-        ##
-        # _Float_ - Total amount paid in utility demand charges in US Dollars in the first year of operation
-        #
-        attr_accessor :year_one_demand_cost_us_dollars
-
-        ##
-        # _Float_ - Total amount paid to the utility in US Dollars in the first year of operation
-        #
-        attr_accessor :year_one_bill_us_dollars
-
-        ##
-        # _Float_ - Total amount paid to the utility in US Dollars over the life of the system
-        #
-        attr_accessor :total_energy_cost_us_dollars
-
-        ##
-        # _Array_ - List of _SolarPV_ systems
-        #
-        attr_accessor :solar_pv
-
-        ##
-        # _Array_ - List of _Wind_ systems
-        #
-        attr_accessor :wind
-
-        ##
-        # _Array_ - List of _Generator_ systems
-        #
-        attr_accessor :generator
-
-        ##
-        # _Array_ - List of _Storage_ systems
-        #
-        attr_accessor :storage
-
-        ##
-        # _Float_ -  Installed solar PV capacity
-        #
-        attr_accessor :total_solar_pv_kw
-
-        ##
-        # _Float_ -  Installed wind capacity
-        #
-        attr_accessor :total_wind_kw
-
-        ##
-        # _Float_ -  Installed storage capacity
-        #
-        attr_accessor :total_storage_kw
-
-        ##
-        # _Float_ -  Installed storage capacity
-        #
-        attr_accessor :total_storage_kwh
-
-        ##
-        # _Float_ -  Installed generator capacity
-        #
-        attr_accessor :total_generator_kw
-
-        ##
-        # Initialize distributed generation system design and financial metrics.
-        #
-        # * Technologies include +:solar_pv+, +:wind+, +:generator+, and +:storage+.
-        # * Financial metrics include +:lcc_us_dollars+, +:npv_us_dollars+, +:year_one_energy_cost_us_dollars+, +:year_one_demand_cost_us_dollars+,
-        # +:year_one_bill_us_dollars+, and +:total_energy_cost_us_dollars+
-        ##
-        # [parameters:]
-        #
-        # * +hash+ - _Hash_ - A hash containting key/value pairs for the distributed generation system attributes listed above.
-        #
-        def initialize(hash = {})
-          hash.delete_if { |k, v| v.nil? }
-
-          @lcc_us_dollars = hash[:lcc_us_dollars]
-          @npv_us_dollars = hash[:npv_us_dollars]
-          @year_one_energy_cost_us_dollars = hash[:year_one_energy_cost_us_dollars]
-          @year_one_demand_cost_us_dollars = hash[:year_one_demand_cost_us_dollars]
-          @year_one_bill_us_dollars = hash[:year_one_bill_us_dollars]
-          @total_energy_cost_us_dollars = hash[:total_energy_cost_us_dollars]
-
-          @total_solar_pv_kw = nil
-          @total_wind_kw = nil
-          @total_generator_kw = nil
-          @total_storage_kw = nil
-          @total_storage_kwh = nil
-
-          @solar_pv = []
-          if hash[:solar_pv].class == Hash
-            hash[:solar_pv] = [hash[:solar_pv]]
-          elsif hash[:solar_pv].nil?
-            hash[:solar_pv] = []
-          end
-
-          hash[:solar_pv].each do |s|
-            if !s[:size_kw].nil? && (s[:size_kw] != 0)
-              @solar_pv.push SolarPV.new(s)
-              if @total_solar_pv_kw.nil?
-                @total_solar_pv_kw = @solar_pv[-1].size_kw
-              else
-                @total_solar_pv_kw += @solar_pv[-1].size_kw
-              end
-            end
-          end
-
-          @wind = []
-          if hash[:wind].class == Hash
-            hash[:wind] = [hash[:wind]]
-          elsif hash[:wind].nil?
-            hash[:wind] = []
-          end
-
-          hash[:wind].each do |s|
-            if !s[:size_kw].nil? && (s[:size_kw] != 0)
-              @wind.push Wind.new(s)
-              if @total_wind_kw.nil?
-                @total_wind_kw = @wind[-1].size_kw
-              else
-                @total_wind_kw += @wind[-1].size_kw
-              end
-            end
-          end
-
-          @generator = []
-          if hash[:generator].class == Hash
-            hash[:generator] = [hash[:generator]]
-          elsif hash[:generator].nil?
-            hash[:generator] = []
-          end
-
-          hash[:generator].each do |s|
-            if !s[:size_kw].nil? && (s[:size_kw] != 0)
-              @generator.push Generator.new(s)
-              if @total_generator_kw.nil?
-                @total_generator_kw = @generator[-1].size_kw
-              else
-                @total_generator_kw += @generator[-1].size_kw
-              end
-            end
-          end
-
-          @storage = []
-          if hash[:storage].class == Hash
-            hash[:storage] = [hash[:storage]]
-          elsif hash[:storage].nil?
-            hash[:storage] = []
-          end
-
-          hash[:storage].each do |s|
-            if !s[:size_kw].nil? && (s[:size_kw] != 0)
-              @storage.push Storage.new(s)
-              if @total_storage_kw.nil?
-                @total_storage_kw = @storage[-1].size_kw
-                @total_storage_kwh = @storage[-1].size_kwh
-              else
-                @total_storage_kw += @storage[-1].size_kw
-                @total_storage_kwh += @storage[-1].size_kwh
-              end
-            end
-          end
-
-          # initialize class variables @@validator and @@schema
-          @@validator ||= Validator.new
-          @@schema ||= @@validator.schema
-
-          # initialize @@logger
-          @@logger ||= URBANopt::Scenario::DefaultReports.logger
-        end
-
-        ##
-        # Add a tech
-        ##
-        def add_tech(name, tech)
-          if name == 'solar_pv'
-            @solar_pv.push tech
-            if @total_solar_pv_kw.nil?
-              @total_solar_pv_kw = tech.size_kw
-            else
-              @total_solar_pv_kw += tech.size_kw
-            end
-          end
-
-          if name == 'wind'
-            @wind.push tech
-            if @total_wind_kw.nil?
-              @total_wind_kw = tech.size_kw
-            else
-              @total_wind_kw += tech.size_kw
-            end
-          end
-
-          if name == 'storage'
-            @storage.push tech
-            if @total_storage_kw.nil?
-              @total_storage_kw = tech.size_kw
-              @total_storage_kwh = tech.size_kwh
-            else
-              @total_storage_kw += tech.size_kw
-              @total_storage_kwh += tech.size_kwh
-            end
-          end
-
-          if name == 'generator'
-            @generator.push tech
-            if @total_generator_kw.nil?
-              @total_generator_kw = tech.size_kw
-            else
-              @total_generator_kw += tech.size_kw
-            end
-          end
-        end
-
-        ##
-        # Convert to a Hash equivalent for JSON serialization
-        ##
-        def to_hash
-          result = {}
-
-          result[:lcc_us_dollars] = @lcc_us_dollars if @lcc_us_dollars
-          result[:npv_us_dollars] = @npv_us_dollars if @npv_us_dollars
-          result[:year_one_energy_cost_us_dollars] = @year_one_energy_cost_us_dollars if @year_one_energy_cost_us_dollars
-          result[:year_one_demand_cost_us_dollars] = @year_one_demand_cost_us_dollars if @year_one_demand_cost_us_dollars
-          result[:year_one_bill_us_dollars] = @year_one_bill_us_dollars if @year_one_bill_us_dollars
-          result[:total_solar_pv_kw] = @total_solar_pv_kw if @total_solar_pv_kw
-          result[:total_wind_kw] = @total_wind_kw if @total_wind_kw
-          result[:total_generator_kw] = @total_generator_kw if @total_generator_kw
-          result[:total_storage_kw] = @total_storage_kw if @total_storage_kw
-          result[:total_storage_kwh] = @total_storage_kwh if @total_storage_kwh
-
-          result[:solar_pv] = []
-          @solar_pv.each do |pv|
-            result[:solar_pv].push pv.to_hash
-          end
-          result[:wind] = []
-          @wind.each do |wind|
-            result[:wind].push wind.to_hash
-          end
-          result[:generator] = []
-          @generator.each do |generator|
-            result[:generator].push generator.to_hash
-          end
-          result[:storage] = []
-          @storage.each do |storage|
-            result[:storage].push storage.to_hash
-          end
-          return result
-        end
-
-        ### get keys ...not needed
-        # def self.get_all_keys(h)
-        #   h.each_with_object([]){|(k,v),a| v.is_a?(Hash) ? a.push(k,*get_all_keys(v)) : a << k }
-        # end
-
-        ##
-        # Add up old and new values
-        ##
-        def self.add_values(existing_value, new_value) #:nodoc:
-          if existing_value && new_value
-            existing_value += new_value
-          elsif new_value
-            existing_value = new_value
-          end
-          return existing_value
-        end
-
-        ##
-        # Merge a distributed generation system with a new system
-        ##
-        def self.merge_distributed_generation(existing_dgen, new_dgen)
-          existing_dgen.lcc_us_dollars = add_values(existing_dgen.lcc_us_dollars, new_dgen.lcc_us_dollars)
-          existing_dgen.npv_us_dollars = add_values(existing_dgen.npv_us_dollars, new_dgen.npv_us_dollars)
-          existing_dgen.year_one_energy_cost_us_dollars = add_values(existing_dgen.year_one_energy_cost_us_dollars, new_dgen.year_one_energy_cost_us_dollars)
-          existing_dgen.year_one_demand_cost_us_dollars = add_values(existing_dgen.year_one_demand_cost_us_dollars, new_dgen.year_one_demand_cost_us_dollars)
-          existing_dgen.year_one_bill_us_dollars = add_values(existing_dgen.year_one_bill_us_dollars, new_dgen.year_one_bill_us_dollars)
-          existing_dgen.total_energy_cost_us_dollars = add_values(existing_dgen.total_energy_cost_us_dollars, new_dgen.total_energy_cost_us_dollars)
-
-          new_dgen.solar_pv.each do |pv|
-            existing_dgen.solar_pv.push pv
-            if existing_dgen.total_solar_pv_kw.nil?
-              existing_dgen.total_solar_pv_kw = pv.size_kw
-            else
-              existing_dgen.total_solar_pv_kw += pv.size_kw
-            end
-          end
-
-          new_dgen.wind.each do |wind|
-            existing_dgen.wind.push wind
-            if existing_dgen.total_wind_kw.nil?
-              existing_dgen.total_wind_kw = wind.size_kw
-            else
-              existing_dgen.total_wind_kw += wind.size_kw
-            end
-          end
-
-          new_dgen.storage.each do |storage|
-            existing_dgen.storage.push storage
-            if existing_dgen.total_wind_kw.nil?
-              existing_dgen.total_storage_kw = storage.size_kw
-              existing_dgen.total_storage_kwh = storage.size_kwh
-            else
-              existing_dgen.total_storage_kw += storage.size_kw
-              existing_dgen.total_storage_kwh += storage.size_kwh
-            end
-          end
-
-          new_dgen.generator.each do |generator|
-            existing_dgen.generator.push generator
-            if existing_dgen.total_wind_kw.nil?
-              existing_dgen.total_generator_kw = generator.size_kw
-            else
-              existing_dgen.total_generator_kw += generator.size_kw
-            end
-          end
-
-          return existing_dgen
-        end
-      end
-    end
-  end
-end