urbanopt-geojson 0.4.0 → 0.6.0

data/lib/urbanopt/geojson/schema/building_properties.json

@@ -142,7 +142,7 @@
       "$ref": "#/definitions/heatingSystemFuelType"
     },
     "weekday_start_time": {
-      "description": "Weekday operating hours start time in 08:30 format, using 24-hr clock. Leave blank to use default. Should this be part of a mixed type struct?",
+      "description": "Weekday operating hours start time in 08:30 format, using 24-hr clock. Leave blank to use default.",
       "type": "string"
     },
     "weekday_duration": {
@@ -150,7 +150,7 @@
       "type": "string"
     },
     "weekend_start_time": {
-      "description": "Weekend operating hours start time in 08:30 format, using 24-hr clock. Leave blank to use default. Should this be part of a mixed type struct?",
+      "description": "Weekend operating hours start time in 08:30 format, using 24-hr clock. Leave blank to use default.",
       "type": "string"
     },
     "weekend_duration": {
@@ -225,6 +225,45 @@
     },
     "user_data": {
       "description": "Arbitrary user data"
+    },
+    "ev_charging": {
+      "description": "Should be set to true if EV charging is associated with the building.",
+      "type": "boolean"
+    },
+    "ev_charging_station_type": {
+      "description": "Indicates whether EV charging associated with the building is for Typical Home, Public or Work charging station",
+      "type": "string",
+      "enum": [
+        "Typical Home",
+        "Typical Public",
+        "Typical Work"
+      ]
+    },
+    "delay_type": {
+      "description": "Adds workplace charging flexibility for different scenarios. Min delay scenario indicates EV charging immediately upon arriving to work, Max delay indicates not charging until necessary thereby shifting EV charging load to later in the day and Min power indicates charging EVs at a minimum rate over the parking event.",
+      "type": "string",
+      "enum": [
+        "Min Delay",
+        "Max Delay",
+        "Min Power"
+      ]
+    },
+    "ev_charging_behavior": {
+      "description": "Describes scenarios for EV charging behavior, Business as Usual implies home dominant charging behavior, Free Workplace Charging at Project Site implies peak power draw from EV charging during morning hours due to EV charging at workplaces and Free Workplace Charging Across Metro Area scenario reduces Home EV charging relative to Free Workplace Charging at Project Site for residents who work elsewhere and can charge their vehicles for free at those workplaces.",
+      "type": "string",
+      "enum": [
+        "Business as Usual",
+        "Free Workplace Charging at Project Site",
+        "Free Workplace Charging Across Metro Area"
+      ]
+    },
+    "ev_percent": {
+      "description": "Denotes the % of vehicles parked at the building that are EVs.",
+      "type": "number"
+    },
+    "ev_curtailment_frac": {
+      "description": "Fraction between 0 and 1 that denotes curtailment of EV charging load to better align EV charging with expected energy production from a solar PV system",
+      "type": "number"
     }
   },
   "oneOf": [
@@ -254,7 +293,7 @@
         "building_type": {
           "enum": [
             "Single-Family Attached"
-           ]
+          ]
         }
       },
       "required": [
@@ -276,7 +315,7 @@
         "building_type": {
           "enum": [
             "Multifamily"
-           ]
+          ]
         }
       },
       "required": [
@@ -373,7 +412,7 @@
       ]
     },
     "systemType": {
-      "description": "Building HVAC system type. Should this be part of a mixed type struct?",
+      "description": "Building HVAC system type.",
       "type": "string",
       "enum": [
         "PTAC with baseboard electric",
@@ -437,7 +476,7 @@
         "Direct evap coolers with baseboard electric",
         "Direct evap coolers with baseboard gas boiler",
         "Direct evap coolers with baseboard central air source heat pump",
-        "Direct evap coolers with no heat",  
+        "Direct evap coolers with no heat",
         "Direct evap coolers with gas unit heaters",
         "Direct evap coolers with forced air furnace",
         "Gas unit heaters",

data/lib/urbanopt/geojson/schema/electrical_connector_properties.json

@@ -50,22 +50,31 @@
       "description": "Id of the junction that this line starts at.",
       "type": "string"
     },
-    "line_properties":{
-        "description": "A sub-element containing all the attributes that can be assigned to a line, including wires",
-        "type":"object",
-        "properties":{
-            "is_switch":{"type":"boolean","description":"Flag indicating if the line is a switch or not"},
-            "is_fuse":{"type":"boolean","description":"Flag indicating if the line is a fuse or not"},
-            "is_open":{"type":"boolean","description":"Flag indicating if the switch/fuse is a open or not"}
+    "line_properties": {
+      "description": "A sub-element containing all the attributes that can be assigned to a line, including wires",
+      "type": "object",
+      "properties": {
+        "is_switch": {
+          "type": "boolean",
+          "description": "Flag indicating if the line is a switch or not"
+        },
+        "is_fuse": {
+          "type": "boolean",
+          "description": "Flag indicating if the line is a fuse or not"
+        },
+        "is_open": {
+          "type": "boolean",
+          "description": "Flag indicating if the switch/fuse is a open or not"
         }
+      }
     },
     "wires": {
-        "description": "Array of wires that are on the line",
-        "type": "array",
-        "items": {
-            "$ref": "#/definitions/WireType",
-            "type": "string"
-        }
+      "description": "Array of wires that are on the line",
+      "type": "array",
+      "items": {
+        "$ref": "#/definitions/WireType",
+        "type": "string"
+      }
     },
     "endJunctionId": {
       "description": "Id of the junction that this line ends at.",
@@ -214,4 +223,4 @@
       ]
     }
   }
-}
+}

data/lib/urbanopt/geojson/schema/thermal_connector_properties.json

@@ -105,4 +105,4 @@
       ]
     }
   }
-}
+}

data/lib/urbanopt/geojson/schema/thermal_junction_properties.json

@@ -80,4 +80,4 @@
       ]
     }
   }
-}
+}

data/lib/urbanopt/geojson/update_areas.rb

@@ -1,5 +1,5 @@
 # *********************************************************************************
-# URBANopt (tm), Copyright (c) 2019-2020, Alliance for Sustainable Energy, LLC, and other
+# URBANopt (tm), Copyright (c) 2019-2021, Alliance for Sustainable Energy, LLC, and other
 # contributors. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without modification,
@@ -16,6 +16,16 @@
 # used to endorse or promote products derived from this software without specific
 # prior written permission.
 #
+# Redistribution of this software, without modification, must refer to the software
+# by the same designation. Redistribution of a modified version of this software
+# (i) may not refer to the modified version by the same designation, or by any
+# confusingly similar designation, and (ii) must refer to the underlying software
+# originally provided by Alliance as “URBANopt”. Except to comply with the foregoing,
+# the term “URBANopt”, or any confusingly similar designation may not be used to
+# refer to any modified version of this software or any modified version of the
+# underlying software originally provided by Alliance without the prior written
+# consent of Alliance.
+#
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

data/lib/urbanopt/geojson/validate_geojson.rb

@@ -1,5 +1,5 @@
 # *********************************************************************************
-# URBANopt (tm), Copyright (c) 2019-2020, Alliance for Sustainable Energy, LLC, and other
+# URBANopt (tm), Copyright (c) 2019-2021, Alliance for Sustainable Energy, LLC, and other
 # contributors. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without modification,
@@ -16,6 +16,16 @@
 # used to endorse or promote products derived from this software without specific
 # prior written permission.
 #
+# Redistribution of this software, without modification, must refer to the software
+# by the same designation. Redistribution of a modified version of this software
+# (i) may not refer to the modified version by the same designation, or by any
+# confusingly similar designation, and (ii) must refer to the underlying software
+# originally provided by Alliance as “URBANopt”. Except to comply with the foregoing,
+# the term “URBANopt”, or any confusingly similar designation may not be used to
+# refer to any modified version of this software or any modified version of the
+# underlying software originally provided by Alliance without the prior written
+# consent of Alliance.
+#
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

data/lib/urbanopt/geojson/version.rb

@@ -1,5 +1,5 @@
 # *********************************************************************************
-# URBANopt (tm), Copyright (c) 2019-2020, Alliance for Sustainable Energy, LLC, and other
+# URBANopt (tm), Copyright (c) 2019-2021, Alliance for Sustainable Energy, LLC, and other
 # contributors. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without modification,
@@ -16,6 +16,16 @@
 # used to endorse or promote products derived from this software without specific
 # prior written permission.
 #
+# Redistribution of this software, without modification, must refer to the software
+# by the same designation. Redistribution of a modified version of this software
+# (i) may not refer to the modified version by the same designation, or by any
+# confusingly similar designation, and (ii) must refer to the underlying software
+# originally provided by Alliance as “URBANopt”. Except to comply with the foregoing,
+# the term “URBANopt”, or any confusingly similar designation may not be used to
+# refer to any modified version of this software or any modified version of the
+# underlying software originally provided by Alliance without the prior written
+# consent of Alliance.
+#
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
@@ -30,6 +40,6 @@
 
 module URBANopt
   module GeoJSON
-    VERSION = '0.4.0'.freeze
+    VERSION = '0.6.0'.freeze
   end
 end

data/lib/urbanopt/geojson/zoning.rb

@@ -1,5 +1,5 @@
 # *********************************************************************************
-# URBANopt (tm), Copyright (c) 2019-2020, Alliance for Sustainable Energy, LLC, and other
+# URBANopt (tm), Copyright (c) 2019-2021, Alliance for Sustainable Energy, LLC, and other
 # contributors. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without modification,
@@ -16,6 +16,16 @@
 # used to endorse or promote products derived from this software without specific
 # prior written permission.
 #
+# Redistribution of this software, without modification, must refer to the software
+# by the same designation. Redistribution of a modified version of this software
+# (i) may not refer to the modified version by the same designation, or by any
+# confusingly similar designation, and (ii) must refer to the underlying software
+# originally provided by Alliance as “URBANopt”. Except to comply with the foregoing,
+# the term “URBANopt”, or any confusingly similar designation may not be used to
+# refer to any modified version of this software or any modified version of the
+# underlying software originally provided by Alliance without the prior written
+# consent of Alliance.
+#
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 # WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

data/urbanopt-geojson-gem.gemspec

@@ -23,13 +23,12 @@ Gem::Specification.new do |spec|
   spec.executables   = spec.files.grep(%r{^exe/}) { |f| File.basename(f) }
   spec.require_paths = ['lib']
 
-  spec.required_ruby_version = '~> 2.5.0'
+  spec.required_ruby_version = '~> 2.7.0'
 
-  spec.add_development_dependency 'bundler', '~> 2.1'
+  spec.add_development_dependency 'bundler', '>= 2.1.0'
   spec.add_development_dependency 'rake', '~> 13.0'
   spec.add_development_dependency 'rspec', '~> 3.7'
 
   spec.add_runtime_dependency 'json-schema', '~> 2.8'
-  spec.add_runtime_dependency 'openstudio-extension', '~> 0.2.5'
-  spec.add_runtime_dependency 'urbanopt-core', '~> 0.4.0'
+  spec.add_runtime_dependency 'urbanopt-core', '~> 0.6.0'
 end

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification
 name: urbanopt-geojson
 version: !ruby/object:Gem::Version
-  version: 0.4.0
+  version: 0.6.0
 platform: ruby
 authors:
 - Tanushree Charan
@@ -10,22 +10,22 @@ authors:
 autorequire: 
 bindir: exe
 cert_chain: []
-date: 2020-09-25 00:00:00.000000000 Z
+date: 2021-04-27 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: bundler
   requirement: !ruby/object:Gem::Requirement
     requirements:
-    - - "~>"
+    - - ">="
       - !ruby/object:Gem::Version
-        version: '2.1'
+        version: 2.1.0
   type: :development
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
-    - - "~>"
+    - - ">="
       - !ruby/object:Gem::Version
-        version: '2.1'
+        version: 2.1.0
 - !ruby/object:Gem::Dependency
   name: rake
   requirement: !ruby/object:Gem::Requirement
@@ -68,34 +68,20 @@ dependencies:
     - - "~>"
       - !ruby/object:Gem::Version
         version: '2.8'
-- !ruby/object:Gem::Dependency
-  name: openstudio-extension
-  requirement: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: 0.2.5
-  type: :runtime
-  prerelease: false
-  version_requirements: !ruby/object:Gem::Requirement
-    requirements:
-    - - "~>"
-      - !ruby/object:Gem::Version
-        version: 0.2.5
 - !ruby/object:Gem::Dependency
   name: urbanopt-core
   requirement: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: 0.4.0
+        version: 0.6.0
   type: :runtime
   prerelease: false
   version_requirements: !ruby/object:Gem::Requirement
     requirements:
     - - "~>"
       - !ruby/object:Gem::Version
-        version: 0.4.0
+        version: 0.6.0
 description: Library and measures to translate URBANopt GeoJSON format to OpenStudio
 email:
 - tanushree.charan@nrel.gov
@@ -141,6 +127,7 @@ files:
 - docs/.vuepress/components/ThermalJunctionProperties.vue
 - docs/.vuepress/config.js
 - docs/.vuepress/highlight.js
+- docs/.vuepress/json-schema-deref-loader.js
 - docs/.vuepress/public/custom_rdoc_styles.css
 - docs/.vuepress/utils.js
 - docs/README.md
@@ -211,14 +198,14 @@ required_ruby_version: !ruby/object:Gem::Requirement
   requirements:
   - - "~>"
     - !ruby/object:Gem::Version
-      version: 2.5.0
+      version: 2.7.0
 required_rubygems_version: !ruby/object:Gem::Requirement
   requirements:
   - - ">="
     - !ruby/object:Gem::Version
       version: '0'
 requirements: []
-rubygems_version: 3.1.4
+rubygems_version: 3.1.2
 signing_key: 
 specification_version: 4
 summary: Translate URBANopt GeoJSON format to OpenStudio