urbanopt-cli 0.9.3 → 0.10.0

data/example_files/resources/hpxml-measures/HPXMLtoOpenStudio/resources/hpxml.rb

@@ -49,13 +49,13 @@ XMLHelper.write_file(hpxml.to_oga, "out.xml")
 
 class HPXML < Object
   HPXML_ATTRS = [:header, :site, :neighbor_buildings, :building_occupancy, :building_construction,
-                 :climate_and_risk_zones, :air_infiltration_measurements, :attics, :foundations,
-                 :roofs, :rim_joists, :walls, :foundation_walls, :floors, :slabs, :windows,
+                 :climate_and_risk_zones, :air_infiltration, :air_infiltration_measurements, :attics,
+                 :foundations, :roofs, :rim_joists, :walls, :foundation_walls, :floors, :slabs, :windows,
                  :skylights, :doors, :partition_wall_mass, :furniture_mass, :heating_systems,
                  :cooling_systems, :heat_pumps, :hvac_plant, :hvac_controls, :hvac_distributions,
                  :ventilation_fans, :water_heating_systems, :hot_water_distributions, :water_fixtures,
-                 :water_heating, :solar_thermal_systems, :pv_systems, :generators, :batteries,
-                 :clothes_washers, :clothes_dryers, :dishwashers, :refrigerators,
+                 :water_heating, :solar_thermal_systems, :pv_systems, :inverters, :generators,
+                 :batteries, :clothes_washers, :clothes_dryers, :dishwashers, :refrigerators,
                  :freezers, :dehumidifiers, :cooking_ranges, :ovens, :lighting_groups, :lighting,
                  :ceiling_fans, :pools, :hot_tubs, :plug_loads, :fuel_loads]
   attr_reader(*HPXML_ATTRS, :doc, :errors, :warnings, :hpxml_path)
@@ -75,6 +75,7 @@ class HPXML < Object
   AtticTypeUnvented = 'UnventedAttic'
   AtticTypeVented = 'VentedAttic'
   AtticWallTypeGable = 'gable'
+  AtticWallTypeKneeWall = 'knee wall'
   BatteryTypeLithiumIon = 'Li-ion'
   BatteryLifetimeModelNone = 'None'
   BatteryLifetimeModelKandlerSmith = 'KandlerSmith'
@@ -92,6 +93,10 @@ class HPXML < Object
   ColorReflective = 'reflective'
   DehumidifierTypePortable = 'portable'
   DehumidifierTypeWholeHome = 'whole-home'
+  DuctBuriedInsulationNone = 'not buried'
+  DuctBuriedInsulationPartial = 'partially buried'
+  DuctBuriedInsulationFull = 'fully buried'
+  DuctBuriedInsulationDeep = 'deeply buried'
   DHWRecirControlTypeManual = 'manual demand control'
   DHWRecirControlTypeNone = 'no control'
   DHWRecirControlTypeSensor = 'presence sensor demand control'
@@ -199,6 +204,8 @@ class HPXML < Object
   InteriorFinishNone = 'none'
   InteriorFinishPlaster = 'plaster'
   InteriorFinishWood = 'wood'
+  InfiltrationTypeUnitTotal = 'unit total'
+  InfiltrationTypeUnitExterior = 'unit exterior only'
   LeakinessTight = 'tight'
   LeakinessAverage = 'average'
   LightingTypeCFL = 'CompactFluorescent'
@@ -236,8 +243,6 @@ class HPXML < Object
   MechVentTypeExhaust = 'exhaust only'
   MechVentTypeHRV = 'heat recovery ventilator'
   MechVentTypeSupply = 'supply only'
-  OccupancyCalculationTypeAsset = 'asset'
-  OccupancyCalculationTypeOperational = 'operational'
   OrientationEast = 'east'
   OrientationNorth = 'north'
   OrientationNortheast = 'northeast'
@@ -274,6 +279,9 @@ class HPXML < Object
   RoofTypePlasticRubber = 'plastic/rubber/synthetic sheeting'
   RoofTypeShingles = 'shingles'
   RoofTypeWoodShingles = 'wood shingles or shakes'
+  ScheduleRegular = 'regular schedule'
+  ScheduleAvailable = 'always available'
+  ScheduleUnavailable = 'always unavailable'
   ShieldingExposed = 'exposed'
   ShieldingNormal = 'normal'
   ShieldingWellShielded = 'well-shielded'
@@ -313,11 +321,13 @@ class HPXML < Object
   UnitsCFM = 'CFM'
   UnitsCFM25 = 'CFM25'
   UnitsCFM50 = 'CFM50'
+  UnitsCFMNatural = 'CFMnatural'
   UnitsCOP = 'COP'
   UnitsDegFPerHour = 'F/hr'
   UnitsDollars = '$'
   UnitsDollarsPerkW = '$/kW'
   UnitsEER = 'EER'
+  UnitsELA = 'EffectiveLeakageArea'
   UnitsCEER = 'CEER'
   UnitsHSPF = 'HSPF'
   UnitsHSPF2 = 'HSPF2'
@@ -349,7 +359,7 @@ class HPXML < Object
   WallTypeWoodStud = 'WoodStud'
   WaterFixtureTypeFaucet = 'faucet'
   WaterFixtureTypeShowerhead = 'shower head'
-  WaterHeaterOperatingModeStandard = 'standard'
+  WaterHeaterOperatingModeHybridAuto = 'hybrid/auto'
   WaterHeaterOperatingModeHeatPumpOnly = 'heat pump only'
   WaterHeaterTankModelTypeMixed = 'mixed'
   WaterHeaterTankModelTypeStratified = 'stratified'
@@ -389,7 +399,7 @@ class HPXML < Object
   WindowClassResidential = 'residential'
   WindowClassLightCommercial = 'light commercial'
 
-  def initialize(hpxml_path: nil, schema_path: nil, schematron_path: nil, collapse_enclosure: true, building_id: nil)
+  def initialize(hpxml_path: nil, schema_validator: nil, schematron_validator: nil, building_id: nil)
     @doc = nil
     @hpxml_path = hpxml_path
     @errors = []
@@ -399,8 +409,9 @@ class HPXML < Object
     if not hpxml_path.nil?
       @doc = XMLHelper.parse_file(hpxml_path)
 
-      if not schema_path.nil?
-        xsd_errors, xsd_warnings = XMLValidator.validate_against_schema(hpxml_path, schema_path)
+      # Validate against XSD schema
+      if not schema_validator.nil?
+        xsd_errors, xsd_warnings = XMLValidator.validate_against_schema(hpxml_path, schema_validator)
         @errors += xsd_errors
         @warnings += xsd_warnings
         return unless @errors.empty?
@@ -410,14 +421,10 @@ class HPXML < Object
       hpxml = XMLHelper.get_element(@doc, '/HPXML')
       Version.check_hpxml_version(XMLHelper.get_attribute_value(hpxml, 'schemaVersion'))
 
-      if not schematron_path.nil?
-        sct_errors, sct_warnings = XMLValidator.validate_against_schematron(hpxml_path, schematron_path, hpxml)
-        @errors += sct_errors
-        @warnings += sct_warnings
-        return unless @errors.empty?
-      end
-
       # Handle multiple buildings
+      # Do this before schematron validation so that:
+      # 1. We don't give schematron warnings for Building elements that are not of interest.
+      # 2. The schematron validation occurs faster (as we're only validating one Building).
       if XMLHelper.get_elements(hpxml, 'Building').size > 1
         if building_id.nil?
           @errors << 'Multiple Building elements defined in HPXML file; Building ID argument must be provided.'
@@ -434,6 +441,18 @@ class HPXML < Object
           @errors << "Could not find Building element with ID '#{building_id}'."
           return unless @errors.empty?
         end
+
+        # Write new HPXML file with all other Building elements removed
+        hpxml_path = Tempfile.new(['hpxml', '.xml']).path.to_s
+        XMLHelper.write_file(hpxml, hpxml_path)
+      end
+
+      # Validate against Schematron
+      if not schematron_validator.nil?
+        sct_errors, sct_warnings = XMLValidator.validate_against_schematron(hpxml_path, schematron_validator, hpxml)
+        @errors += sct_errors
+        @warnings += sct_warnings
+        return unless @errors.empty?
       end
     end
 
@@ -443,13 +462,6 @@ class HPXML < Object
     # Check for additional errors (those hard to check via Schematron)
     @errors += check_for_errors()
     return unless @errors.empty?
-
-    # Clean up
-    delete_tiny_surfaces()
-    delete_adiabatic_subsurfaces()
-    if collapse_enclosure
-      collapse_enclosure_surfaces()
-    end
   end
 
   def hvac_systems
@@ -533,7 +545,7 @@ class HPXML < Object
 
   def fraction_of_windows_operable()
     # Calculates the fraction of windows that are operable.
-    # Since we don't have quantity available, we use area as an approximation.
+    # Since we don't have count available, we use area as an approximation.
     window_area_total = @windows.map { |w| w.area }.sum(0.0)
     window_area_operable = @windows.map { |w| w.fraction_operable * w.area }.sum(0.0)
     if window_area_total <= 0
@@ -605,7 +617,7 @@ class HPXML < Object
   def compartmentalization_boundary_areas()
     # Returns the infiltration compartmentalization boundary areas
     total_area = 0.0 # Total surface area that bounds the Infiltration Volume
-    exterior_area = 0.0 # Same as above excluding surfaces attached to garage or other housing units
+    exterior_area = 0.0 # Same as above excluding surfaces attached to garage, other housing units, or other multifamily spaces (see 301-2019 Addendum B)
 
     # Determine which spaces are within infiltration volume
     spaces_within_infil_volume = HPXML::conditioned_locations_this_unit
@@ -705,6 +717,7 @@ class HPXML < Object
     @building_construction.to_oga(@doc)
     @climate_and_risk_zones.to_oga(@doc)
     @air_infiltration_measurements.to_oga(@doc)
+    @air_infiltration.to_oga(@doc)
     @attics.to_oga(@doc)
     @foundations.to_oga(@doc)
     @roofs.to_oga(@doc)
@@ -731,6 +744,7 @@ class HPXML < Object
     @water_heating.to_oga(@doc)
     @solar_thermal_systems.to_oga(@doc)
     @pv_systems.to_oga(@doc)
+    @inverters.to_oga(@doc)
     @batteries.to_oga(@doc)
     @generators.to_oga(@doc)
     @clothes_washers.to_oga(@doc)
@@ -759,6 +773,7 @@ class HPXML < Object
     @building_construction = BuildingConstruction.new(self, hpxml)
     @climate_and_risk_zones = ClimateandRiskZones.new(self, hpxml)
     @air_infiltration_measurements = AirInfiltrationMeasurements.new(self, hpxml)
+    @air_infiltration = AirInfiltration.new(self, hpxml)
     @attics = Attics.new(self, hpxml)
     @foundations = Foundations.new(self, hpxml)
     @roofs = Roofs.new(self, hpxml)
@@ -785,6 +800,7 @@ class HPXML < Object
     @water_heating = WaterHeating.new(self, hpxml)
     @solar_thermal_systems = SolarThermalSystems.new(self, hpxml)
     @pv_systems = PVSystems.new(self, hpxml)
+    @inverters = Inverters.new(self, hpxml)
     @batteries = Batteries.new(self, hpxml)
     @generators = Generators.new(self, hpxml)
     @clothes_washers = ClothesWashers.new(self, hpxml)
@@ -919,22 +935,26 @@ class HPXML < Object
     def initialize(hpxml_object, *args)
       @emissions_scenarios = EmissionsScenarios.new(hpxml_object)
       @utility_bill_scenarios = UtilityBillScenarios.new(hpxml_object)
+      @unavailable_periods = UnavailablePeriods.new(hpxml_object)
       super(hpxml_object, *args)
     end
     ATTRS = [:xml_type, :xml_generated_by, :created_date_and_time, :transaction,
              :software_program_used, :software_program_version, :eri_calculation_version,
-             :timestep, :building_id, :event_type, :state_code, :zip_code,
+             :co2index_calculation_version, :timestep, :building_id, :event_type, :state_code, :zip_code,
              :egrid_region, :egrid_subregion, :cambium_region_gea, :time_zone_utc_offset,
              :sim_begin_month, :sim_begin_day, :sim_end_month, :sim_end_day, :sim_calendar_year,
              :dst_enabled, :dst_begin_month, :dst_begin_day, :dst_end_month, :dst_end_day,
-             :heat_pump_sizing_methodology, :allow_increased_fixed_capacities,
-             :apply_ashrae140_assumptions, :energystar_calculation_version, :schedules_filepaths,
-             :occupancy_calculation_type, :extension_properties, :iecc_eri_calculation_version,
-             :zerh_calculation_version, :temperature_capacitance_multiplier,
-             :natvent_days_per_week]
+             :heat_pump_sizing_methodology, :allow_increased_fixed_capacities, :apply_ashrae140_assumptions,
+             :energystar_calculation_version, :schedules_filepaths, :extension_properties, :iecc_eri_calculation_version,
+             :zerh_calculation_version, :temperature_capacitance_multiplier, :natvent_days_per_week,
+             :shading_summer_begin_month, :shading_summer_begin_day, :shading_summer_end_month,
+             :shading_summer_end_day, :manualj_heating_design_temp, :manualj_cooling_design_temp,
+             :manualj_heating_setpoint, :manualj_cooling_setpoint, :manualj_humidity_setpoint,
+             :manualj_internal_loads_sensible, :manualj_internal_loads_latent, :manualj_num_occupants]
     attr_accessor(*ATTRS)
     attr_reader(:emissions_scenarios)
     attr_reader(:utility_bill_scenarios)
+    attr_reader(:unavailable_periods)
 
     def check_for_errors
       errors = []
@@ -954,8 +974,10 @@ class HPXML < Object
       end
 
       errors += HPXML::check_dates('Daylight Saving', @dst_begin_month, @dst_begin_day, @dst_end_month, @dst_end_day)
+      errors += HPXML::check_dates('Shading Summer Season', @shading_summer_begin_month, @shading_summer_begin_day, @shading_summer_end_month, @shading_summer_end_day)
       errors += @emissions_scenarios.check_for_errors
       errors += @utility_bill_scenarios.check_for_errors
+      errors += @unavailable_periods.check_for_errors
 
       return errors
     end
@@ -977,12 +999,12 @@ class HPXML < Object
       software_info = XMLHelper.add_element(hpxml, 'SoftwareInfo')
       XMLHelper.add_element(software_info, 'SoftwareProgramUsed', @software_program_used, :string) unless @software_program_used.nil?
       XMLHelper.add_element(software_info, 'SoftwareProgramVersion', @software_program_version, :string) unless @software_program_version.nil?
-      XMLHelper.add_extension(software_info, 'OccupancyCalculationType', @occupancy_calculation_type, :string, @occupancy_calculation_type_isdefaulted) unless @occupancy_calculation_type.nil?
       XMLHelper.add_extension(software_info, 'ApplyASHRAE140Assumptions', @apply_ashrae140_assumptions, :boolean) unless @apply_ashrae140_assumptions.nil?
-      { @eri_calculation_version => 'ERICalculation',
-        @energystar_calculation_version => 'EnergyStarCalculation',
-        @iecc_eri_calculation_version => 'IECCERICalculation',
-        @zerh_calculation_version => 'ZERHCalculation' }.each do |calculation_version, element_name|
+      { 'ERICalculation' => @eri_calculation_version,
+        'CO2IndexCalculation' => @co2index_calculation_version,
+        'EnergyStarCalculation' => @energystar_calculation_version,
+        'IECCERICalculation' => @iecc_eri_calculation_version,
+        'ZERHCalculation' => @zerh_calculation_version }.each do |element_name, calculation_version|
         next if calculation_version.nil?
 
         extension = XMLHelper.create_elements_as_needed(software_info, ['extension'])
@@ -1005,6 +1027,17 @@ class HPXML < Object
         XMLHelper.add_element(hvac_sizing_control, 'HeatPumpSizingMethodology', @heat_pump_sizing_methodology, :string, @heat_pump_sizing_methodology_isdefaulted) unless @heat_pump_sizing_methodology.nil?
         XMLHelper.add_element(hvac_sizing_control, 'AllowIncreasedFixedCapacities', @allow_increased_fixed_capacities, :boolean, @allow_increased_fixed_capacities_isdefaulted) unless @allow_increased_fixed_capacities.nil?
       end
+      if (not @manualj_heating_design_temp.nil?) || (not @manualj_cooling_design_temp.nil?) || (not @manualj_heating_setpoint.nil?) || (not @manualj_cooling_setpoint.nil?) || (not @manualj_humidity_setpoint.nil?) || (not @manualj_internal_loads_sensible.nil?) || (not @manualj_internal_loads_latent.nil?) || (not @manualj_num_occupants.nil?)
+        manualj_sizing_inputs = XMLHelper.create_elements_as_needed(software_info, ['extension', 'HVACSizingControl', 'ManualJInputs'])
+        XMLHelper.add_element(manualj_sizing_inputs, 'HeatingDesignTemperature', @manualj_heating_design_temp, :float, @manualj_heating_design_temp_isdefaulted) unless @manualj_heating_design_temp.nil?
+        XMLHelper.add_element(manualj_sizing_inputs, 'CoolingDesignTemperature', @manualj_cooling_design_temp, :float, @manualj_cooling_design_temp_isdefaulted) unless @manualj_cooling_design_temp.nil?
+        XMLHelper.add_element(manualj_sizing_inputs, 'HeatingSetpoint', @manualj_heating_setpoint, :float, @manualj_heating_setpoint_isdefaulted) unless @manualj_heating_setpoint.nil?
+        XMLHelper.add_element(manualj_sizing_inputs, 'CoolingSetpoint', @manualj_cooling_setpoint, :float, @manualj_cooling_setpoint_isdefaulted) unless @manualj_cooling_setpoint.nil?
+        XMLHelper.add_element(manualj_sizing_inputs, 'HumiditySetpoint', @manualj_humidity_setpoint, :float, @manualj_humidity_setpoint_isdefaulted) unless @manualj_humidity_setpoint.nil?
+        XMLHelper.add_element(manualj_sizing_inputs, 'InternalLoadsSensible', @manualj_internal_loads_sensible, :float, @manualj_internal_loads_sensible_isdefaulted) unless @manualj_internal_loads_sensible.nil?
+        XMLHelper.add_element(manualj_sizing_inputs, 'InternalLoadsLatent', @manualj_internal_loads_latent, :float, @manualj_internal_loads_latent_isdefaulted) unless @manualj_internal_loads_latent.nil?
+        XMLHelper.add_element(manualj_sizing_inputs, 'NumberofOccupants', @manualj_num_occupants, :integer, @manualj_num_occupants_isdefaulted) unless @manualj_num_occupants.nil?
+      end
       XMLHelper.add_extension(software_info, 'NaturalVentilationAvailabilityDaysperWeek', @natvent_days_per_week, :integer, @natvent_days_per_week_isdefaulted) unless @natvent_days_per_week.nil?
       if (not @schedules_filepaths.nil?) && (not @schedules_filepaths.empty?)
         extension = XMLHelper.create_elements_as_needed(software_info, ['extension'])
@@ -1012,6 +1045,13 @@ class HPXML < Object
           XMLHelper.add_element(extension, 'SchedulesFilePath', schedules_filepath, :string)
         end
       end
+      if (not @shading_summer_begin_month.nil?) || (not @shading_summer_begin_day.nil?) || (not @shading_summer_end_month.nil?) || (not @shading_summer_end_day.nil?)
+        window_shading_season = XMLHelper.create_elements_as_needed(software_info, ['extension', 'ShadingControl'])
+        XMLHelper.add_element(window_shading_season, 'SummerBeginMonth', @shading_summer_begin_month, :integer, @shading_summer_begin_month_isdefaulted) unless @shading_summer_begin_month.nil?
+        XMLHelper.add_element(window_shading_season, 'SummerBeginDayOfMonth', @shading_summer_begin_day, :integer, @shading_summer_begin_day_isdefaulted) unless @shading_summer_begin_day.nil?
+        XMLHelper.add_element(window_shading_season, 'SummerEndMonth', @shading_summer_end_month, :integer, @shading_summer_end_month_isdefaulted) unless @shading_summer_end_month.nil?
+        XMLHelper.add_element(window_shading_season, 'SummerEndDayOfMonth', @shading_summer_end_day, :integer, @shading_summer_end_day_isdefaulted) unless @shading_summer_end_day.nil?
+      end
       if (not @extension_properties.nil?) && (not @extension_properties.empty?)
         properties = XMLHelper.create_elements_as_needed(software_info, ['extension', 'AdditionalProperties'])
         @extension_properties.each do |key, value|
@@ -1020,6 +1060,7 @@ class HPXML < Object
       end
       @emissions_scenarios.to_oga(software_info)
       @utility_bill_scenarios.to_oga(software_info)
+      @unavailable_periods.to_oga(software_info)
 
       building = XMLHelper.add_element(hpxml, 'Building')
       building_building_id = XMLHelper.add_element(building, 'BuildingID')
@@ -1066,6 +1107,7 @@ class HPXML < Object
       @software_program_used = XMLHelper.get_value(hpxml, 'SoftwareInfo/SoftwareProgramUsed', :string)
       @software_program_version = XMLHelper.get_value(hpxml, 'SoftwareInfo/SoftwareProgramVersion', :string)
       @eri_calculation_version = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/ERICalculation/Version', :string)
+      @co2index_calculation_version = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/CO2IndexCalculation/Version', :string)
       @iecc_eri_calculation_version = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/IECCERICalculation/Version', :string)
       @energystar_calculation_version = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/EnergyStarCalculation/Version', :string)
       @zerh_calculation_version = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/ZERHCalculation/Version', :string)
@@ -1076,11 +1118,22 @@ class HPXML < Object
       @sim_end_day = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/SimulationControl/EndDayOfMonth', :integer)
       @sim_calendar_year = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/SimulationControl/CalendarYear', :integer)
       @temperature_capacitance_multiplier = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/SimulationControl/TemperatureCapacitanceMultiplier', :float)
-      @occupancy_calculation_type = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/OccupancyCalculationType', :string)
       @natvent_days_per_week = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/NaturalVentilationAvailabilityDaysperWeek', :integer)
+      @shading_summer_begin_month = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/ShadingControl/SummerBeginMonth', :integer)
+      @shading_summer_begin_day = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/ShadingControl/SummerBeginDayOfMonth', :integer)
+      @shading_summer_end_month = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/ShadingControl/SummerEndMonth', :integer)
+      @shading_summer_end_day = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/ShadingControl/SummerEndDayOfMonth', :integer)
       @apply_ashrae140_assumptions = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/ApplyASHRAE140Assumptions', :boolean)
       @heat_pump_sizing_methodology = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/HeatPumpSizingMethodology', :string)
       @allow_increased_fixed_capacities = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/AllowIncreasedFixedCapacities', :boolean)
+      @manualj_heating_design_temp = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/HeatingDesignTemperature', :float)
+      @manualj_cooling_design_temp = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/CoolingDesignTemperature', :float)
+      @manualj_heating_setpoint = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/HeatingSetpoint', :float)
+      @manualj_cooling_setpoint = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/CoolingSetpoint', :float)
+      @manualj_humidity_setpoint = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/HumiditySetpoint', :float)
+      @manualj_internal_loads_sensible = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/InternalLoadsSensible', :float)
+      @manualj_internal_loads_latent = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/InternalLoadsLatent', :float)
+      @manualj_num_occupants = XMLHelper.get_value(hpxml, 'SoftwareInfo/extension/HVACSizingControl/ManualJInputs/NumberofOccupants', :integer)
       @schedules_filepaths = XMLHelper.get_values(hpxml, 'SoftwareInfo/extension/SchedulesFilePath', :string)
       @extension_properties = {}
       XMLHelper.get_elements(hpxml, 'SoftwareInfo/extension/AdditionalProperties').each do |property|
@@ -1093,6 +1146,7 @@ class HPXML < Object
       end
       @emissions_scenarios.from_oga(XMLHelper.get_element(hpxml, 'SoftwareInfo'))
       @utility_bill_scenarios.from_oga(XMLHelper.get_element(hpxml, 'SoftwareInfo'))
+      @unavailable_periods.from_oga(XMLHelper.get_element(hpxml, 'SoftwareInfo'))
       @building_id = HPXML::get_id(hpxml, 'Building/BuildingID')
       @event_type = XMLHelper.get_value(hpxml, 'Building/ProjectStatus/EventType', :string)
       @state_code = XMLHelper.get_value(hpxml, 'Building/Site/Address/StateCode', :string)
@@ -1329,6 +1383,61 @@ class HPXML < Object
     end
   end
 
+  class UnavailablePeriods < BaseArrayElement
+    def add(**kwargs)
+      self << UnavailablePeriod.new(@hpxml_object, **kwargs)
+    end
+
+    def from_oga(software_info)
+      return if software_info.nil?
+
+      XMLHelper.get_elements(software_info, 'extension/UnavailablePeriods/UnavailablePeriod').each do |unavailable_period|
+        self << UnavailablePeriod.new(@hpxml_object, unavailable_period)
+      end
+    end
+  end
+
+  class UnavailablePeriod < BaseElement
+    ATTRS = [:column_name, :begin_month, :begin_day, :begin_hour, :end_month, :end_day, :end_hour, :natvent_availability]
+    attr_accessor(*ATTRS)
+
+    def delete
+      @hpxml_object.header.unavailable_periods.delete(self)
+    end
+
+    def check_for_errors
+      errors = []
+      errors += HPXML::check_dates('Unavailable Period', @begin_month, @begin_day, @end_month, @end_day)
+      return errors
+    end
+
+    def to_oga(software_info)
+      unavailable_periods = XMLHelper.create_elements_as_needed(software_info, ['extension', 'UnavailablePeriods'])
+      unavailable_period = XMLHelper.add_element(unavailable_periods, 'UnavailablePeriod')
+      XMLHelper.add_element(unavailable_period, 'ColumnName', @column_name, :string) unless @column_name.nil?
+      XMLHelper.add_element(unavailable_period, 'BeginMonth', @begin_month, :integer, @begin_month_isdefaulted) unless @begin_month.nil?
+      XMLHelper.add_element(unavailable_period, 'BeginDayOfMonth', @begin_day, :integer, @begin_day_isdefaulted) unless @begin_day.nil?
+      XMLHelper.add_element(unavailable_period, 'BeginHourOfDay', @begin_hour, :integer, @begin_hour_isdefaulted) unless @begin_hour.nil?
+      XMLHelper.add_element(unavailable_period, 'EndMonth', @end_month, :integer, @end_month_isdefaulted) unless @end_month.nil?
+      XMLHelper.add_element(unavailable_period, 'EndDayOfMonth', @end_day, :integer, @end_day_isdefaulted) unless @end_day.nil?
+      XMLHelper.add_element(unavailable_period, 'EndHourOfDay', @end_hour, :integer, @end_hour_isdefaulted) unless @end_hour.nil?
+      XMLHelper.add_element(unavailable_period, 'NaturalVentilation', @natvent_availability, :string, @natvent_availability_isdefaulted) unless @natvent_availability.nil?
+    end
+
+    def from_oga(unavailable_period)
+      return if unavailable_period.nil?
+
+      @column_name = XMLHelper.get_value(unavailable_period, 'ColumnName', :string)
+      @begin_month = XMLHelper.get_value(unavailable_period, 'BeginMonth', :integer)
+      @begin_day = XMLHelper.get_value(unavailable_period, 'BeginDayOfMonth', :integer)
+      @begin_hour = XMLHelper.get_value(unavailable_period, 'BeginHourOfDay', :integer)
+      @end_month = XMLHelper.get_value(unavailable_period, 'EndMonth', :integer)
+      @end_day = XMLHelper.get_value(unavailable_period, 'EndDayOfMonth', :integer)
+      @end_hour = XMLHelper.get_value(unavailable_period, 'EndHourOfDay', :integer)
+      @natvent_availability = XMLHelper.get_value(unavailable_period, 'NaturalVentilation', :string)
+    end
+  end
+
   class Site < BaseElement
     ATTRS = [:site_type, :surroundings, :vertical_surroundings, :shielding_of_home, :orientation_of_front_of_home, :azimuth_of_front_of_home, :fuels,
              :ground_conductivity]
@@ -1460,7 +1569,7 @@ class HPXML < Object
     ATTRS = [:year_built, :number_of_conditioned_floors, :number_of_conditioned_floors_above_grade,
              :average_ceiling_height, :number_of_bedrooms, :number_of_bathrooms,
              :conditioned_floor_area, :conditioned_building_volume, :residential_facility_type,
-             :building_footprint_area, :has_flue_or_chimney]
+             :building_footprint_area]
     attr_accessor(*ATTRS)
 
     def check_for_errors
@@ -1482,7 +1591,6 @@ class HPXML < Object
       XMLHelper.add_element(building_construction, 'BuildingFootprintArea', @building_footprint_area, :float, @building_footprint_area_isdefaulted) unless @building_footprint_area.nil?
       XMLHelper.add_element(building_construction, 'ConditionedFloorArea', @conditioned_floor_area, :float) unless @conditioned_floor_area.nil?
       XMLHelper.add_element(building_construction, 'ConditionedBuildingVolume', @conditioned_building_volume, :float, @conditioned_building_volume_isdefaulted) unless @conditioned_building_volume.nil?
-      XMLHelper.add_extension(building_construction, 'HasFlueOrChimney', @has_flue_or_chimney, :boolean, @has_flue_or_chimney_isdefaulted) unless @has_flue_or_chimney.nil?
     end
 
     def from_oga(hpxml)
@@ -1501,7 +1609,6 @@ class HPXML < Object
       @building_footprint_area = XMLHelper.get_value(building_construction, 'BuildingFootprintArea', :float)
       @conditioned_floor_area = XMLHelper.get_value(building_construction, 'ConditionedFloorArea', :float)
       @conditioned_building_volume = XMLHelper.get_value(building_construction, 'ConditionedBuildingVolume', :float)
-      @has_flue_or_chimney = XMLHelper.get_value(building_construction, 'extension/HasFlueOrChimney', :boolean)
     end
   end
 
@@ -1596,6 +1703,32 @@ class HPXML < Object
     end
   end
 
+  class AirInfiltration < BaseElement
+    ATTRS = [:has_flue_or_chimney_in_conditioned_space]
+    attr_accessor(*ATTRS)
+
+    def check_for_errors
+      errors = []
+      return errors
+    end
+
+    def to_oga(doc)
+      return if nil?
+
+      air_infiltration = XMLHelper.create_elements_as_needed(doc, ['HPXML', 'Building', 'BuildingDetails', 'Enclosure', 'AirInfiltration'])
+      XMLHelper.add_extension(air_infiltration, 'HasFlueOrChimneyInConditionedSpace', @has_flue_or_chimney_in_conditioned_space, :boolean, @has_flue_or_chimney_in_conditioned_space_isdefaulted) unless @has_flue_or_chimney_in_conditioned_space.nil?
+    end
+
+    def from_oga(hpxml)
+      return if hpxml.nil?
+
+      air_infiltration = XMLHelper.get_element(hpxml, 'Building/BuildingDetails/Enclosure/AirInfiltration')
+      return if air_infiltration.nil?
+
+      @has_flue_or_chimney_in_conditioned_space = XMLHelper.get_value(air_infiltration, 'extension/HasFlueOrChimneyInConditionedSpace', :boolean)
+    end
+  end
+
   class AirInfiltrationMeasurements < BaseArrayElement
     def add(**kwargs)
       self << AirInfiltrationMeasurement.new(@hpxml_object, **kwargs)
@@ -1611,8 +1744,8 @@ class HPXML < Object
   end
 
   class AirInfiltrationMeasurement < BaseElement
-    ATTRS = [:id, :house_pressure, :unit_of_measure, :air_leakage, :effective_leakage_area, :type,
-             :infiltration_volume, :leakiness_description, :infiltration_height, :a_ext]
+    ATTRS = [:id, :house_pressure, :unit_of_measure, :air_leakage, :effective_leakage_area, :type_of_measurement,
+             :infiltration_volume, :leakiness_description, :infiltration_height, :a_ext, :infiltration_type]
     attr_accessor(*ATTRS)
 
     def check_for_errors
@@ -1627,7 +1760,8 @@ class HPXML < Object
       air_infiltration_measurement = XMLHelper.add_element(air_infiltration, 'AirInfiltrationMeasurement')
       sys_id = XMLHelper.add_element(air_infiltration_measurement, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
-      XMLHelper.add_element(air_infiltration_measurement, 'TypeOfInfiltrationMeasurement', @type, :string) unless @type.nil?
+      XMLHelper.add_element(air_infiltration_measurement, 'TypeOfInfiltrationMeasurement', @type_of_measurement, :string) unless @type_of_measurement.nil?
+      XMLHelper.add_element(air_infiltration_measurement, 'TypeOfInfiltrationLeakage', @infiltration_type, :string) unless @infiltration_type.nil?
       XMLHelper.add_element(air_infiltration_measurement, 'HousePressure', @house_pressure, :float) unless @house_pressure.nil?
       XMLHelper.add_element(air_infiltration_measurement, 'LeakinessDescription', @leakiness_description, :string) unless @leakiness_description.nil?
       if (not @unit_of_measure.nil?) && (not @air_leakage.nil?)
@@ -1638,14 +1772,15 @@ class HPXML < Object
       XMLHelper.add_element(air_infiltration_measurement, 'EffectiveLeakageArea', @effective_leakage_area, :float) unless @effective_leakage_area.nil?
       XMLHelper.add_element(air_infiltration_measurement, 'InfiltrationVolume', @infiltration_volume, :float, @infiltration_volume_isdefaulted) unless @infiltration_volume.nil?
       XMLHelper.add_element(air_infiltration_measurement, 'InfiltrationHeight', @infiltration_height, :float, @infiltration_height_isdefaulted) unless @infiltration_height.nil?
-      XMLHelper.add_extension(air_infiltration_measurement, 'Aext', @a_ext, :float) unless @a_ext.nil?
+      XMLHelper.add_extension(air_infiltration_measurement, 'Aext', @a_ext, :float, @a_ext_isdefaulted) unless @a_ext.nil?
     end
 
     def from_oga(air_infiltration_measurement)
       return if air_infiltration_measurement.nil?
 
       @id = HPXML::get_id(air_infiltration_measurement)
-      @type = XMLHelper.get_value(air_infiltration_measurement, 'TypeOfInfiltrationMeasurement', :string)
+      @type_of_measurement = XMLHelper.get_value(air_infiltration_measurement, 'TypeOfInfiltrationMeasurement', :string)
+      @infiltration_type = XMLHelper.get_value(air_infiltration_measurement, 'TypeOfInfiltrationLeakage', :string)
       @house_pressure = XMLHelper.get_value(air_infiltration_measurement, 'HousePressure', :float)
       @leakiness_description = XMLHelper.get_value(air_infiltration_measurement, 'LeakinessDescription', :string)
       @unit_of_measure = XMLHelper.get_value(air_infiltration_measurement, 'BuildingAirLeakage/UnitofMeasure', :string)
@@ -2090,8 +2225,9 @@ class HPXML < Object
     ATTRS = [:id, :interior_adjacent_to, :area, :azimuth, :orientation, :roof_type,
              :roof_color, :solar_absorptance, :emittance, :pitch, :radiant_barrier,
              :insulation_id, :insulation_assembly_r_value, :insulation_cavity_r_value,
-             :insulation_continuous_r_value, :radiant_barrier_grade,
-             :interior_finish_type, :interior_finish_thickness]
+             :insulation_continuous_r_value, :radiant_barrier_grade, :insulation_grade,
+             :interior_finish_type, :interior_finish_thickness, :framing_factor,
+             :framing_size, :framing_spacing]
     attr_accessor(*ATTRS)
 
     def skylights
@@ -2171,6 +2307,12 @@ class HPXML < Object
         XMLHelper.add_element(interior_finish, 'Type', @interior_finish_type, :string, @interior_finish_type_isdefaulted) unless @interior_finish_type.nil?
         XMLHelper.add_element(interior_finish, 'Thickness', @interior_finish_thickness, :float, @interior_finish_thickness_isdefaulted) unless @interior_finish_thickness.nil?
       end
+      if (not @framing_factor.nil?) || (not @framing_size.nil?) || (not @framing_spacing.nil?)
+        rafters = XMLHelper.add_element(roof, 'Rafters')
+        XMLHelper.add_element(rafters, 'Size', @framing_size, :string) unless @framing_size.nil?
+        XMLHelper.add_element(rafters, 'Spacing', @framing_spacing, :float) unless @framing_spacing.nil?
+        XMLHelper.add_element(rafters, 'FramingFactor', @framing_factor, :float) unless @framing_factor.nil?
+      end
       XMLHelper.add_element(roof, 'Pitch', @pitch, :float) unless @pitch.nil?
       XMLHelper.add_element(roof, 'RadiantBarrier', @radiant_barrier, :boolean, @radiant_barrier_isdefaulted) unless @radiant_barrier.nil?
       XMLHelper.add_element(roof, 'RadiantBarrierGrade', @radiant_barrier_grade, :integer, @radiant_barrier_grade_isdefaulted) unless @radiant_barrier_grade.nil?
@@ -2181,6 +2323,7 @@ class HPXML < Object
       else
         XMLHelper.add_attribute(sys_id, 'id', @id + 'Insulation')
       end
+      XMLHelper.add_element(insulation, 'InsulationGrade', @insulation_grade, :integer) unless @insulation_grade.nil?
       XMLHelper.add_element(insulation, 'AssemblyEffectiveRValue', @insulation_assembly_r_value, :float) unless @insulation_assembly_r_value.nil?
       if not @insulation_cavity_r_value.nil?
         layer = XMLHelper.add_element(insulation, 'Layer')
@@ -2211,12 +2354,16 @@ class HPXML < Object
         @interior_finish_type = XMLHelper.get_value(interior_finish, 'Type', :string)
         @interior_finish_thickness = XMLHelper.get_value(interior_finish, 'Thickness', :float)
       end
+      @framing_factor = XMLHelper.get_value(roof, 'Rafters/FramingFactor', :float)
+      @framing_size = XMLHelper.get_value(roof, 'Rafters/Size', :string)
+      @framing_spacing = XMLHelper.get_value(roof, 'Rafters/Spacing', :float)
       @pitch = XMLHelper.get_value(roof, 'Pitch', :float)
       @radiant_barrier = XMLHelper.get_value(roof, 'RadiantBarrier', :boolean)
       @radiant_barrier_grade = XMLHelper.get_value(roof, 'RadiantBarrierGrade', :integer)
       insulation = XMLHelper.get_element(roof, 'Insulation')
       if not insulation.nil?
         @insulation_id = HPXML::get_id(insulation)
+        @insulation_grade = XMLHelper.get_value(insulation, 'InsulationGrade', :integer)
         @insulation_assembly_r_value = XMLHelper.get_value(insulation, 'AssemblyEffectiveRValue', :float)
         @insulation_cavity_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='cavity']/NominalRValue", :float)
         @insulation_continuous_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='continuous']/NominalRValue", :float)
@@ -2241,7 +2388,7 @@ class HPXML < Object
   class RimJoist < BaseElement
     ATTRS = [:id, :exterior_adjacent_to, :interior_adjacent_to, :area, :orientation, :azimuth, :siding,
              :color, :solar_absorptance, :emittance, :insulation_id, :insulation_assembly_r_value,
-             :insulation_cavity_r_value, :insulation_continuous_r_value]
+             :insulation_cavity_r_value, :insulation_continuous_r_value, :framing_size]
     attr_accessor(*ATTRS)
 
     def is_exterior
@@ -2318,6 +2465,10 @@ class HPXML < Object
         XMLHelper.add_element(layer, 'InstallationType', 'continuous', :string)
         XMLHelper.add_element(layer, 'NominalRValue', @insulation_continuous_r_value, :float)
       end
+      if not @framing_size.nil?
+        floor_joists = XMLHelper.add_element(rim_joist, 'FloorJoists')
+        XMLHelper.add_element(floor_joists, 'Size', @framing_size, :string) unless @framing_size.nil?
+      end
     end
 
     def from_oga(rim_joist)
@@ -2340,6 +2491,7 @@ class HPXML < Object
         @insulation_cavity_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='cavity']/NominalRValue", :float)
         @insulation_continuous_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='continuous']/NominalRValue", :float)
       end
+      @framing_size = XMLHelper.get_value(rim_joist, 'FloorJoists/Size', :string)
     end
   end
 
@@ -2361,7 +2513,8 @@ class HPXML < Object
     ATTRS = [:id, :exterior_adjacent_to, :interior_adjacent_to, :wall_type, :optimum_value_engineering,
              :area, :orientation, :azimuth, :siding, :color, :solar_absorptance, :emittance, :insulation_id,
              :insulation_assembly_r_value, :insulation_cavity_r_value, :insulation_continuous_r_value,
-             :interior_finish_type, :interior_finish_thickness, :attic_wall_type]
+             :interior_finish_type, :interior_finish_thickness, :attic_wall_type, :framing_factor,
+             :framing_size, :framing_spacing, :insulation_grade]
     attr_accessor(*ATTRS)
 
     def windows
@@ -2455,6 +2608,12 @@ class HPXML < Object
       XMLHelper.add_element(wall, 'Area', @area, :float) unless @area.nil?
       XMLHelper.add_element(wall, 'Orientation', @orientation, :string, @orientation_isdefaulted) unless @orientation.nil?
       XMLHelper.add_element(wall, 'Azimuth', @azimuth, :integer, @azimuth_isdefaulted) unless @azimuth.nil?
+      if (not @framing_factor.nil?) || (not @framing_size.nil?) || (not @framing_spacing.nil?)
+        studs = XMLHelper.add_element(wall, 'Studs')
+        XMLHelper.add_element(studs, 'Size', @framing_size, :string) unless @framing_size.nil?
+        XMLHelper.add_element(studs, 'Spacing', @framing_spacing, :float) unless @framing_spacing.nil?
+        XMLHelper.add_element(studs, 'FramingFactor', @framing_factor, :float) unless @framing_factor.nil?
+      end
       XMLHelper.add_element(wall, 'Siding', @siding, :string, @siding_isdefaulted) unless @siding.nil?
       XMLHelper.add_element(wall, 'Color', @color, :string, @color_isdefaulted) unless @color.nil?
       XMLHelper.add_element(wall, 'SolarAbsorptance', @solar_absorptance, :float, @solar_absorptance_isdefaulted) unless @solar_absorptance.nil?
@@ -2471,6 +2630,7 @@ class HPXML < Object
       else
         XMLHelper.add_attribute(sys_id, 'id', @id + 'Insulation')
       end
+      XMLHelper.add_element(insulation, 'InsulationGrade', @insulation_grade, :integer) unless @insulation_grade.nil?
       XMLHelper.add_element(insulation, 'AssemblyEffectiveRValue', @insulation_assembly_r_value, :float) unless @insulation_assembly_r_value.nil?
       if not @insulation_cavity_r_value.nil?
         layer = XMLHelper.add_element(insulation, 'Layer')
@@ -2498,6 +2658,9 @@ class HPXML < Object
       @area = XMLHelper.get_value(wall, 'Area', :float)
       @orientation = XMLHelper.get_value(wall, 'Orientation', :string)
       @azimuth = XMLHelper.get_value(wall, 'Azimuth', :integer)
+      @framing_size = XMLHelper.get_value(wall, 'Studs/Size', :string)
+      @framing_spacing = XMLHelper.get_value(wall, 'Studs/Spacing', :float)
+      @framing_factor = XMLHelper.get_value(wall, 'Studs/FramingFactor', :float)
       @siding = XMLHelper.get_value(wall, 'Siding', :string)
       @color = XMLHelper.get_value(wall, 'Color', :string)
       @solar_absorptance = XMLHelper.get_value(wall, 'SolarAbsorptance', :float)
@@ -2510,6 +2673,7 @@ class HPXML < Object
       insulation = XMLHelper.get_element(wall, 'Insulation')
       if not insulation.nil?
         @insulation_id = HPXML::get_id(insulation)
+        @insulation_grade = XMLHelper.get_value(insulation, 'InsulationGrade', :integer)
         @insulation_assembly_r_value = XMLHelper.get_value(insulation, 'AssemblyEffectiveRValue', :float)
         @insulation_cavity_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='cavity']/NominalRValue", :float)
         @insulation_continuous_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='continuous']/NominalRValue", :float)
@@ -2707,7 +2871,8 @@ class HPXML < Object
   class Floor < BaseElement
     ATTRS = [:id, :exterior_adjacent_to, :interior_adjacent_to, :floor_type, :area, :insulation_id,
              :insulation_assembly_r_value, :insulation_cavity_r_value, :insulation_continuous_r_value,
-             :floor_or_ceiling, :interior_finish_type, :interior_finish_thickness]
+             :floor_or_ceiling, :interior_finish_type, :interior_finish_thickness, :insulation_grade,
+             :framing_factor, :framing_size, :framing_spacing]
     attr_accessor(*ATTRS)
 
     def is_ceiling
@@ -2790,6 +2955,12 @@ class HPXML < Object
         floor_type_el = XMLHelper.add_element(floor, 'FloorType')
         XMLHelper.add_element(floor_type_el, @floor_type)
       end
+      if (not @framing_factor.nil?) || (not @framing_size.nil?) || (not @framing_spacing.nil?)
+        joists = XMLHelper.add_element(floor, 'FloorJoists')
+        XMLHelper.add_element(joists, 'Size', @framing_size, :string) unless @framing_size.nil?
+        XMLHelper.add_element(joists, 'Spacing', @framing_spacing, :float) unless @framing_spacing.nil?
+        XMLHelper.add_element(joists, 'FramingFactor', @framing_factor, :float) unless @framing_factor.nil?
+      end
       XMLHelper.add_element(floor, 'Area', @area, :float) unless @area.nil?
       if (not @interior_finish_type.nil?) || (not @interior_finish_thickness.nil?)
         interior_finish = XMLHelper.add_element(floor, 'InteriorFinish')
@@ -2803,6 +2974,7 @@ class HPXML < Object
       else
         XMLHelper.add_attribute(sys_id, 'id', @id + 'Insulation')
       end
+      XMLHelper.add_element(insulation, 'InsulationGrade', @insulation_grade, :integer) unless @insulation_grade.nil?
       XMLHelper.add_element(insulation, 'AssemblyEffectiveRValue', @insulation_assembly_r_value, :float) unless @insulation_assembly_r_value.nil?
       if not @insulation_cavity_r_value.nil?
         layer = XMLHelper.add_element(insulation, 'Layer')
@@ -2824,6 +2996,9 @@ class HPXML < Object
       @interior_adjacent_to = XMLHelper.get_value(floor, 'InteriorAdjacentTo', :string)
       @floor_or_ceiling = XMLHelper.get_value(floor, 'FloorOrCeiling', :string)
       @floor_type = XMLHelper.get_child_name(floor, 'FloorType')
+      @framing_size = XMLHelper.get_value(floor, 'FloorJoists/Size', :string)
+      @framing_spacing = XMLHelper.get_value(floor, 'FloorJoists/Spacing', :float)
+      @framing_factor = XMLHelper.get_value(floor, 'FloorJoists/FramingFactor', :float)
       @area = XMLHelper.get_value(floor, 'Area', :float)
       interior_finish = XMLHelper.get_element(floor, 'InteriorFinish')
       if not interior_finish.nil?
@@ -2833,6 +3008,7 @@ class HPXML < Object
       insulation = XMLHelper.get_element(floor, 'Insulation')
       if not insulation.nil?
         @insulation_id = HPXML::get_id(insulation)
+        @insulation_grade = XMLHelper.get_value(insulation, 'InsulationGrade', :float)
         @insulation_assembly_r_value = XMLHelper.get_value(insulation, 'AssemblyEffectiveRValue', :float)
         @insulation_cavity_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='cavity']/NominalRValue", :float)
         @insulation_continuous_r_value = XMLHelper.get_value(insulation, "Layer[InstallationType='continuous']/NominalRValue", :float)
@@ -3435,7 +3611,8 @@ class HPXML < Object
              :heating_efficiency_percent, :fraction_heat_load_served, :electric_auxiliary_energy,
              :third_party_certification, :htg_seed_id, :is_shared_system, :number_of_units_served,
              :shared_loop_watts, :shared_loop_motor_efficiency, :fan_coil_watts, :fan_watts_per_cfm,
-             :airflow_defect_ratio, :fan_watts, :heating_airflow_cfm, :location, :primary_system]
+             :airflow_defect_ratio, :fan_watts, :heating_airflow_cfm, :location, :primary_system,
+             :pilot_light, :pilot_light_btuh]
     attr_accessor(*ATTRS)
 
     def distribution_system
@@ -3471,14 +3648,19 @@ class HPXML < Object
       return
     end
 
-    def is_heat_pump_backup_system
+    def primary_heat_pump
+      # Returns the HP for which this heating system is backup
       @hpxml_object.heat_pumps.each do |heat_pump|
         next if heat_pump.backup_system_idref.nil?
         next if heat_pump.backup_system_idref != @id
 
-        return true
+        return heat_pump
       end
-      return false
+      return
+    end
+
+    def is_heat_pump_backup_system
+      return !primary_heat_pump.nil?
     end
 
     def delete
@@ -3504,7 +3686,7 @@ class HPXML < Object
       heating_system = XMLHelper.add_element(hvac_plant, 'HeatingSystem')
       sys_id = XMLHelper.add_element(heating_system, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
-      XMLHelper.add_element(heating_system, 'UnitLocation', @location, :string) unless @location.nil?
+      XMLHelper.add_element(heating_system, 'UnitLocation', @location, :string, @location_isdefaulted) unless @location.nil?
       XMLHelper.add_element(heating_system, 'YearInstalled', @year_installed, :integer) unless @year_installed.nil?
       XMLHelper.add_element(heating_system, 'ThirdPartyCertification', @third_party_certification, :string) unless @third_party_certification.nil?
       if not @distribution_system_idref.nil?
@@ -3515,7 +3697,18 @@ class HPXML < Object
       XMLHelper.add_element(heating_system, 'NumberofUnitsServed', @number_of_units_served, :integer) unless @number_of_units_served.nil?
       if not @heating_system_type.nil?
         heating_system_type_el = XMLHelper.add_element(heating_system, 'HeatingSystemType')
-        XMLHelper.add_element(heating_system_type_el, @heating_system_type)
+        type_el = XMLHelper.add_element(heating_system_type_el, @heating_system_type)
+        if [HPXML::HVACTypeFurnace,
+            HPXML::HVACTypeWallFurnace,
+            HPXML::HVACTypeFloorFurnace,
+            HPXML::HVACTypeFireplace,
+            HPXML::HVACTypeStove,
+            HPXML::HVACTypeBoiler].include? @heating_system_type
+          XMLHelper.add_element(type_el, 'PilotLight', @pilot_light, :boolean, @pilot_light_isdefaulted) unless @pilot_light.nil?
+          if @pilot_light
+            XMLHelper.add_extension(type_el, 'PilotLightBtuh', @pilot_light_btuh, :float, @pilot_light_btuh_isdefaulted) unless @pilot_light_btuh.nil?
+          end
+        end
       end
       XMLHelper.add_element(heating_system, 'HeatingSystemFuel', @heating_system_fuel, :string) unless @heating_system_fuel.nil?
       XMLHelper.add_element(heating_system, 'HeatingCapacity', @heating_capacity, :float, @heating_capacity_isdefaulted) unless @heating_capacity.nil?
@@ -3557,6 +3750,10 @@ class HPXML < Object
       @number_of_units_served = XMLHelper.get_value(heating_system, 'NumberofUnitsServed', :integer)
       @heating_system_type = XMLHelper.get_child_name(heating_system, 'HeatingSystemType')
       @heating_system_fuel = XMLHelper.get_value(heating_system, 'HeatingSystemFuel', :string)
+      @pilot_light = XMLHelper.get_value(heating_system, "HeatingSystemType/#{@heating_system_type}/PilotLight", :boolean)
+      if @pilot_light
+        @pilot_light_btuh = XMLHelper.get_value(heating_system, "HeatingSystemType/#{@heating_system_type}/extension/PilotLightBtuh", :float)
+      end
       @heating_capacity = XMLHelper.get_value(heating_system, 'HeatingCapacity', :float)
       @heating_efficiency_afue = XMLHelper.get_value(heating_system, "AnnualHeatingEfficiency[Units='#{UnitsAFUE}']/Value", :float)
       @heating_efficiency_percent = XMLHelper.get_value(heating_system, "AnnualHeatingEfficiency[Units='Percent']/Value", :float)
@@ -3607,9 +3804,9 @@ class HPXML < Object
              :cooling_efficiency_seer2, :cooling_efficiency_eer, :cooling_efficiency_ceer, :cooling_efficiency_kw_per_ton,
              :cooling_shr, :third_party_certification, :clg_seed_id, :is_shared_system, :number_of_units_served,
              :shared_loop_watts, :shared_loop_motor_efficiency, :fan_coil_watts, :airflow_defect_ratio,
-             :fan_watts_per_cfm, :charge_defect_ratio, :cooling_airflow_cfm, :location, :primary_system, :integrated_heating_system_fuel,
-             :integrated_heating_system_capacity, :integrated_heating_system_efficiency_percent, :integrated_heating_system_fraction_heat_load_served,
-             :integrated_heating_system_airflow_cfm, :htg_seed_id]
+             :fan_watts_per_cfm, :charge_defect_ratio, :cooling_airflow_cfm, :location, :primary_system,
+             :integrated_heating_system_fuel, :integrated_heating_system_capacity, :integrated_heating_system_efficiency_percent,
+             :integrated_heating_system_fraction_heat_load_served, :integrated_heating_system_airflow_cfm, :htg_seed_id, :crankcase_heater_watts]
     attr_accessor(*ATTRS)
 
     def distribution_system
@@ -3665,7 +3862,7 @@ class HPXML < Object
       cooling_system = XMLHelper.add_element(hvac_plant, 'CoolingSystem')
       sys_id = XMLHelper.add_element(cooling_system, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
-      XMLHelper.add_element(cooling_system, 'UnitLocation', @location, :string) unless @location.nil?
+      XMLHelper.add_element(cooling_system, 'UnitLocation', @location, :string, @location_isdefaulted) unless @location.nil?
       XMLHelper.add_element(cooling_system, 'YearInstalled', @year_installed, :integer) unless @year_installed.nil?
       XMLHelper.add_element(cooling_system, 'ThirdPartyCertification', @third_party_certification, :string) unless @third_party_certification.nil?
       if not @distribution_system_idref.nil?
@@ -3721,7 +3918,9 @@ class HPXML < Object
       XMLHelper.add_extension(cooling_system, 'SharedLoopWatts', @shared_loop_watts, :float) unless @shared_loop_watts.nil?
       XMLHelper.add_extension(cooling_system, 'SharedLoopMotorEfficiency', @shared_loop_motor_efficiency, :float) unless @shared_loop_motor_efficiency.nil?
       XMLHelper.add_extension(cooling_system, 'FanCoilWatts', @fan_coil_watts, :float) unless @fan_coil_watts.nil?
+      XMLHelper.add_extension(cooling_system, 'CrankcaseHeaterPowerWatts', @crankcase_heater_watts, :float, @crankcase_heater_watts_isdefaulted) unless @crankcase_heater_watts.nil?
       XMLHelper.add_extension(cooling_system, 'CoolingSeedId', @clg_seed_id, :string) unless @clg_seed_id.nil?
+      XMLHelper.add_extension(cooling_system, 'HeatingSeedId', @htg_seed_id, :string) unless @htg_seed_id.nil?
       if @primary_system
         primary_cooling_system = XMLHelper.add_element(primary_systems, 'PrimaryCoolingSystem')
         XMLHelper.add_attribute(primary_cooling_system, 'idref', @id)
@@ -3761,7 +3960,9 @@ class HPXML < Object
       @shared_loop_watts = XMLHelper.get_value(cooling_system, 'extension/SharedLoopWatts', :float)
       @shared_loop_motor_efficiency = XMLHelper.get_value(cooling_system, 'extension/SharedLoopMotorEfficiency', :float)
       @fan_coil_watts = XMLHelper.get_value(cooling_system, 'extension/FanCoilWatts', :float)
+      @crankcase_heater_watts = XMLHelper.get_value(cooling_system, 'extension/CrankcaseHeaterPowerWatts', :float)
       @clg_seed_id = XMLHelper.get_value(cooling_system, 'extension/CoolingSeedId', :string)
+      @htg_seed_id = XMLHelper.get_value(cooling_system, 'extension/HeatingSeedId', :string)
       primary_cooling_system = HPXML::get_idref(XMLHelper.get_element(cooling_system, '../PrimarySystems/PrimaryCoolingSystem'))
       if primary_cooling_system == @id
         @primary_system = true
@@ -3795,7 +3996,7 @@ class HPXML < Object
 
   class HeatPump < BaseElement
     ATTRS = [:id, :distribution_system_idref, :year_installed, :heat_pump_type, :heat_pump_fuel,
-             :heating_capacity, :heating_capacity_17F, :cooling_capacity, :compressor_type,
+             :heating_capacity, :heating_capacity_17F, :cooling_capacity, :compressor_type, :compressor_lockout_temp,
              :cooling_shr, :backup_type, :backup_system_idref, :backup_heating_fuel, :backup_heating_capacity,
              :backup_heating_efficiency_percent, :backup_heating_efficiency_afue, :backup_heating_lockout_temp,
              :backup_heating_switchover_temp, :fraction_heat_load_served, :fraction_cool_load_served, :cooling_efficiency_seer,
@@ -3803,7 +4004,8 @@ class HPXML < Object
              :heating_efficiency_hspf2, :heating_efficiency_cop, :third_party_certification, :htg_seed_id, :clg_seed_id,
              :pump_watts_per_ton, :fan_watts_per_cfm, :is_shared_system, :number_of_units_served, :shared_loop_watts,
              :shared_loop_motor_efficiency, :airflow_defect_ratio, :charge_defect_ratio,
-             :heating_airflow_cfm, :cooling_airflow_cfm, :location, :primary_heating_system, :primary_cooling_system]
+             :heating_airflow_cfm, :cooling_airflow_cfm, :location, :primary_heating_system, :primary_cooling_system,
+             :heating_capacity_retention_fraction, :heating_capacity_retention_temp, :crankcase_heater_watts]
     attr_accessor(*ATTRS)
 
     def distribution_system
@@ -3867,7 +4069,7 @@ class HPXML < Object
       heat_pump = XMLHelper.add_element(hvac_plant, 'HeatPump')
       sys_id = XMLHelper.add_element(heat_pump, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
-      XMLHelper.add_element(heat_pump, 'UnitLocation', @location, :string) unless @location.nil?
+      XMLHelper.add_element(heat_pump, 'UnitLocation', @location, :string, @location_isdefaulted) unless @location.nil?
       XMLHelper.add_element(heat_pump, 'YearInstalled', @year_installed, :integer) unless @year_installed.nil?
       XMLHelper.add_element(heat_pump, 'ThirdPartyCertification', @third_party_certification, :string) unless @third_party_certification.nil?
       if not @distribution_system_idref.nil?
@@ -3882,6 +4084,7 @@ class HPXML < Object
       XMLHelper.add_element(heat_pump, 'HeatingCapacity17F', @heating_capacity_17F, :float) unless @heating_capacity_17F.nil?
       XMLHelper.add_element(heat_pump, 'CoolingCapacity', @cooling_capacity, :float, @cooling_capacity_isdefaulted) unless @cooling_capacity.nil?
       XMLHelper.add_element(heat_pump, 'CompressorType', @compressor_type, :string, @compressor_type_isdefaulted) unless @compressor_type.nil?
+      XMLHelper.add_element(heat_pump, 'CompressorLockoutTemperature', @compressor_lockout_temp, :float, @compressor_lockout_temp_isdefaulted) unless @compressor_lockout_temp.nil?
       XMLHelper.add_element(heat_pump, 'CoolingSensibleHeatFraction', @cooling_shr, :float, @cooling_shr_isdefaulted) unless @cooling_shr.nil?
       XMLHelper.add_element(heat_pump, 'BackupType', @backup_type, :string, @backup_type_isdefaulted) unless @backup_type.nil?
       if not @backup_system_idref.nil?
@@ -3947,6 +4150,12 @@ class HPXML < Object
       XMLHelper.add_extension(heat_pump, 'PumpPowerWattsPerTon', @pump_watts_per_ton, :float, @pump_watts_per_ton_isdefaulted) unless @pump_watts_per_ton.nil?
       XMLHelper.add_extension(heat_pump, 'SharedLoopWatts', @shared_loop_watts, :float) unless @shared_loop_watts.nil?
       XMLHelper.add_extension(heat_pump, 'SharedLoopMotorEfficiency', @shared_loop_motor_efficiency, :float) unless @shared_loop_motor_efficiency.nil?
+      if (not @heating_capacity_retention_fraction.nil?) || (not @heating_capacity_retention_temp.nil?)
+        htg_cap_retention = XMLHelper.add_extension(heat_pump, 'HeatingCapacityRetention')
+        XMLHelper.add_element(htg_cap_retention, 'Fraction', @heating_capacity_retention_fraction, :float, @heating_capacity_retention_fraction_isdefaulted) unless @heating_capacity_retention_fraction.nil?
+        XMLHelper.add_element(htg_cap_retention, 'Temperature', @heating_capacity_retention_temp, :float, @heating_capacity_retention_temp_isdefaulted) unless @heating_capacity_retention_temp.nil?
+      end
+      XMLHelper.add_extension(heat_pump, 'CrankcaseHeaterPowerWatts', @crankcase_heater_watts, :float, @crankcase_heater_watts_isdefaulted) unless @crankcase_heater_watts.nil?
       XMLHelper.add_extension(heat_pump, 'HeatingSeedId', @htg_seed_id, :string) unless @htg_seed_id.nil?
       XMLHelper.add_extension(heat_pump, 'CoolingSeedId', @clg_seed_id, :string) unless @clg_seed_id.nil?
       if @primary_heating_system
@@ -3975,6 +4184,7 @@ class HPXML < Object
       @heating_capacity_17F = XMLHelper.get_value(heat_pump, 'HeatingCapacity17F', :float)
       @cooling_capacity = XMLHelper.get_value(heat_pump, 'CoolingCapacity', :float)
       @compressor_type = XMLHelper.get_value(heat_pump, 'CompressorType', :string)
+      @compressor_lockout_temp = XMLHelper.get_value(heat_pump, 'CompressorLockoutTemperature', :float)
       @cooling_shr = XMLHelper.get_value(heat_pump, 'CoolingSensibleHeatFraction', :float)
       @backup_type = XMLHelper.get_value(heat_pump, 'BackupType', :string)
       @backup_system_idref = HPXML::get_idref(XMLHelper.get_element(heat_pump, 'BackupSystem'))
@@ -4001,6 +4211,9 @@ class HPXML < Object
       @pump_watts_per_ton = XMLHelper.get_value(heat_pump, 'extension/PumpPowerWattsPerTon', :float)
       @shared_loop_watts = XMLHelper.get_value(heat_pump, 'extension/SharedLoopWatts', :float)
       @shared_loop_motor_efficiency = XMLHelper.get_value(heat_pump, 'extension/SharedLoopMotorEfficiency', :float)
+      @heating_capacity_retention_fraction = XMLHelper.get_value(heat_pump, 'extension/HeatingCapacityRetention/Fraction', :float)
+      @heating_capacity_retention_temp = XMLHelper.get_value(heat_pump, 'extension/HeatingCapacityRetention/Temperature', :float)
+      @crankcase_heater_watts = XMLHelper.get_value(heat_pump, 'extension/CrankcaseHeaterPowerWatts', :float)
       @htg_seed_id = XMLHelper.get_value(heat_pump, 'extension/HeatingSeedId', :string)
       @clg_seed_id = XMLHelper.get_value(heat_pump, 'extension/CoolingSeedId', :string)
       primary_heating_system = HPXML::get_idref(XMLHelper.get_element(heat_pump, '../PrimarySystems/PrimaryHeatingSystem'))
@@ -4041,14 +4254,12 @@ class HPXML < Object
                        cdl_sens_slabs: 'Slabs',
                        cdl_sens_ceilings: 'Ceilings',
                        cdl_sens_infilvent: 'InfilVent',
-                       cdl_sens_intgains: 'InternalGains' }
+                       cdl_sens_intgains: 'InternalLoads' }
     CDL_LAT_ATTRS = { cdl_lat_total: 'Total',
                       cdl_lat_ducts: 'Ducts',
                       cdl_lat_infilvent: 'InfilVent',
-                      cdl_lat_intgains: 'InternalGains' }
-    TEMPERATURE_ATTRS = { temp_heating: 'Heating',
-                          temp_cooling: 'Cooling' }
-    ATTRS = HDL_ATTRS.keys + CDL_SENS_ATTRS.keys + CDL_LAT_ATTRS.keys + TEMPERATURE_ATTRS.keys
+                      cdl_lat_intgains: 'InternalLoads' }
+    ATTRS = HDL_ATTRS.keys + CDL_SENS_ATTRS.keys + CDL_LAT_ATTRS.keys
     attr_accessor(*ATTRS)
 
     def check_for_errors
@@ -4060,13 +4271,6 @@ class HPXML < Object
       return if nil?
 
       hvac_plant = XMLHelper.create_elements_as_needed(doc, ['HPXML', 'Building', 'BuildingDetails', 'Systems', 'HVAC', 'HVACPlant'])
-      if not @temp_heating.nil?
-        dl_extension = XMLHelper.create_elements_as_needed(hvac_plant, ['extension', 'DesignTemperatures'])
-        XMLHelper.add_attribute(dl_extension, 'dataSource', 'software')
-        TEMPERATURE_ATTRS.each do |attr, element_name|
-          XMLHelper.add_element(dl_extension, element_name, send(attr), :float)
-        end
-      end
       if not @hdl_total.nil?
         dl_extension = XMLHelper.create_elements_as_needed(hvac_plant, ['extension', 'DesignLoads'])
         XMLHelper.add_attribute(dl_extension, 'dataSource', 'software')
@@ -4091,9 +4295,6 @@ class HPXML < Object
       hvac_plant = XMLHelper.get_element(hpxml, 'Building/BuildingDetails/Systems/HVAC/HVACPlant')
       return if hvac_plant.nil?
 
-      TEMPERATURE_ATTRS.each do |attr, element_name|
-        send("#{attr}=", XMLHelper.get_value(hvac_plant, "extension/DesignTemperatures/#{element_name}", :float))
-      end
       HDL_ATTRS.each do |attr, element_name|
         send("#{attr}=", XMLHelper.get_value(hvac_plant, "extension/DesignLoads/Heating/#{element_name}", :float))
       end
@@ -4269,18 +4470,6 @@ class HPXML < Object
       return list
     end
 
-    def total_unconditioned_duct_areas
-      areas = { HPXML::DuctTypeSupply => 0,
-                HPXML::DuctTypeReturn => 0 }
-      @ducts.each do |duct|
-        next if HPXML::conditioned_locations.include? duct.duct_location
-        next if duct.duct_type.nil?
-
-        areas[duct.duct_type] += duct.duct_surface_area
-      end
-      return areas
-    end
-
     def delete
       @hpxml_object.hvac_distributions.delete(self)
       @hpxml_object.hvac_systems.each do |hvac_system|
@@ -4440,7 +4629,8 @@ class HPXML < Object
 
   class Duct < BaseElement
     ATTRS = [:id, :duct_type, :duct_insulation_r_value, :duct_insulation_material, :duct_location,
-             :duct_fraction_area, :duct_surface_area, :duct_surface_area_multiplier]
+             :duct_fraction_area, :duct_surface_area, :duct_surface_area_multiplier,
+             :duct_buried_insulation_level, :duct_effective_r_value]
     attr_accessor(*ATTRS)
 
     def delete
@@ -4466,6 +4656,8 @@ class HPXML < Object
         XMLHelper.add_element(ins_material_el, @duct_insulation_material)
       end
       XMLHelper.add_element(ducts_el, 'DuctInsulationRValue', @duct_insulation_r_value, :float) unless @duct_insulation_r_value.nil?
+      XMLHelper.add_element(ducts_el, 'DuctBuriedInsulationLevel', @duct_buried_insulation_level, :string, @duct_buried_insulation_level_isdefaulted) unless @duct_buried_insulation_level.nil?
+      XMLHelper.add_element(ducts_el, 'DuctEffectiveRValue', @duct_effective_r_value, :float, @duct_effective_r_value_isdefaulted) unless @duct_effective_r_value.nil?
       XMLHelper.add_element(ducts_el, 'DuctLocation', @duct_location, :string, @duct_location_isdefaulted) unless @duct_location.nil?
       XMLHelper.add_element(ducts_el, 'FractionDuctArea', @duct_fraction_area, :float, @duct_fraction_area_isdefaulted) unless @duct_fraction_area.nil?
       XMLHelper.add_element(ducts_el, 'DuctSurfaceArea', @duct_surface_area, :float, @duct_surface_area_isdefaulted) unless @duct_surface_area.nil?
@@ -4479,6 +4671,8 @@ class HPXML < Object
       @duct_type = XMLHelper.get_value(duct, 'DuctType', :string)
       @duct_insulation_material = XMLHelper.get_child_name(duct, 'DuctInsulationMaterial')
       @duct_insulation_r_value = XMLHelper.get_value(duct, 'DuctInsulationRValue', :float)
+      @duct_buried_insulation_level = XMLHelper.get_value(duct, 'DuctBuriedInsulationLevel', :string)
+      @duct_effective_r_value = XMLHelper.get_value(duct, 'DuctEffectiveRValue', :float)
       @duct_location = XMLHelper.get_value(duct, 'DuctLocation', :string)
       @duct_fraction_area = XMLHelper.get_value(duct, 'FractionDuctArea', :float)
       @duct_surface_area = XMLHelper.get_value(duct, 'DuctSurfaceArea', :float)
@@ -4505,7 +4699,7 @@ class HPXML < Object
              :used_for_whole_building_ventilation, :used_for_seasonal_cooling_load_reduction,
              :used_for_local_ventilation, :total_recovery_efficiency, :total_recovery_efficiency_adjusted,
              :sensible_recovery_efficiency, :sensible_recovery_efficiency_adjusted,
-             :fan_power, :fan_power_defaulted, :quantity, :fan_location, :distribution_system_idref, :start_hour,
+             :fan_power, :fan_power_defaulted, :count, :fan_location, :distribution_system_idref, :start_hour,
              :is_shared_system, :in_unit_flow_rate, :fraction_recirculation, :used_for_garage_ventilation,
              :preheating_fuel, :preheating_efficiency_cop, :preheating_fraction_load_served, :precooling_fuel,
              :precooling_efficiency_cop, :precooling_fraction_load_served, :calculated_flow_rate,
@@ -4681,7 +4875,7 @@ class HPXML < Object
       ventilation_fan = XMLHelper.add_element(ventilation_fans, 'VentilationFan')
       sys_id = XMLHelper.add_element(ventilation_fan, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
-      XMLHelper.add_element(ventilation_fan, 'Quantity', @quantity, :integer, @quantity_isdefaulted) unless @quantity.nil?
+      XMLHelper.add_element(ventilation_fan, 'Count', @count, :integer, @count_isdefaulted) unless @count.nil?
       XMLHelper.add_element(ventilation_fan, 'FanType', @fan_type, :string) unless @fan_type.nil?
       if (not @cfis_addtl_runtime_operating_mode.nil?) || (not @cfis_supplemental_fan_idref.nil?)
         cfis_controls = XMLHelper.add_element(ventilation_fan, 'CFISControls')
@@ -4739,7 +4933,7 @@ class HPXML < Object
       return if ventilation_fan.nil?
 
       @id = HPXML::get_id(ventilation_fan)
-      @quantity = XMLHelper.get_value(ventilation_fan, 'Quantity', :integer)
+      @count = XMLHelper.get_value(ventilation_fan, 'Count', :integer)
       @fan_type = XMLHelper.get_value(ventilation_fan, 'FanType', :string)
       @rated_flow_rate = XMLHelper.get_value(ventilation_fan, 'RatedFlowRate', :float)
       @calculated_flow_rate = XMLHelper.get_value(ventilation_fan, 'CalculatedFlowRate', :float)
@@ -4843,6 +5037,7 @@ class HPXML < Object
       XMLHelper.add_element(water_heating_system, 'HeatingCapacity', @heating_capacity, :float, @heating_capacity_isdefaulted) unless @heating_capacity.nil?
       XMLHelper.add_element(water_heating_system, 'EnergyFactor', @energy_factor, :float, @energy_factor_isdefaulted) unless @energy_factor.nil?
       XMLHelper.add_element(water_heating_system, 'UniformEnergyFactor', @uniform_energy_factor, :float) unless @uniform_energy_factor.nil?
+      XMLHelper.add_element(water_heating_system, 'HPWHOperatingMode', @operating_mode, :string, @operating_mode_isdefaulted) unless @operating_mode.nil?
       XMLHelper.add_element(water_heating_system, 'FirstHourRating', @first_hour_rating, :float) unless @first_hour_rating.nil?
       XMLHelper.add_element(water_heating_system, 'UsageBin', @usage_bin, :string, @usage_bin_isdefaulted) unless @usage_bin.nil?
       XMLHelper.add_element(water_heating_system, 'RecoveryEfficiency', @recovery_efficiency, :float, @recovery_efficiency_isdefaulted) unless @recovery_efficiency.nil?
@@ -4862,10 +5057,9 @@ class HPXML < Object
         related_hvac_idref_el = XMLHelper.add_element(water_heating_system, 'RelatedHVACSystem')
         XMLHelper.add_attribute(related_hvac_idref_el, 'idref', @related_hvac_idref)
       end
-      if (not @tank_model_type.nil?) || (not @operating_mode.nil?)
+      if not @tank_model_type.nil?
         extension = XMLHelper.create_elements_as_needed(water_heating_system, ['extension'])
         XMLHelper.add_element(extension, 'TankModelType', @tank_model_type, :string, @tank_model_type_isdefaulted) unless @tank_model_type.nil?
-        XMLHelper.add_element(extension, 'OperatingMode', @operating_mode, :string, @operating_mode_isdefaulted) unless @operating_mode.nil?
       end
     end
 
@@ -4886,6 +5080,7 @@ class HPXML < Object
       @heating_capacity = XMLHelper.get_value(water_heating_system, 'HeatingCapacity', :float)
       @energy_factor = XMLHelper.get_value(water_heating_system, 'EnergyFactor', :float)
       @uniform_energy_factor = XMLHelper.get_value(water_heating_system, 'UniformEnergyFactor', :float)
+      @operating_mode = XMLHelper.get_value(water_heating_system, 'HPWHOperatingMode', :string)
       @first_hour_rating = XMLHelper.get_value(water_heating_system, 'FirstHourRating', :float)
       @usage_bin = XMLHelper.get_value(water_heating_system, 'UsageBin', :string)
       @recovery_efficiency = XMLHelper.get_value(water_heating_system, 'RecoveryEfficiency', :float)
@@ -4896,7 +5091,6 @@ class HPXML < Object
       @uses_desuperheater = XMLHelper.get_value(water_heating_system, 'UsesDesuperheater', :boolean)
       @related_hvac_idref = HPXML::get_idref(XMLHelper.get_element(water_heating_system, 'RelatedHVACSystem'))
       @tank_model_type = XMLHelper.get_value(water_heating_system, 'extension/TankModelType', :string)
-      @operating_mode = XMLHelper.get_value(water_heating_system, 'extension/OperatingMode', :string)
     end
   end
 
@@ -5181,16 +5375,28 @@ class HPXML < Object
 
   class PVSystem < BaseElement
     ATTRS = [:id, :location, :module_type, :tracking, :array_orientation, :array_azimuth, :array_tilt,
-             :max_power_output, :inverter_efficiency, :system_losses_fraction, :number_of_panels,
+             :max_power_output, :inverter_idref, :system_losses_fraction, :number_of_panels,
              :year_modules_manufactured, :is_shared_system, :number_of_bedrooms_served]
     attr_accessor(*ATTRS)
 
+    def inverter
+      return if @inverter_idref.nil?
+
+      @hpxml_object.inverters.each do |inv|
+        next unless inv.id == @inverter_idref
+
+        return inv
+      end
+      fail "Attached inverter '#{@inverter_idref}' not found for pv system '#{@id}'."
+    end
+
     def delete
       @hpxml_object.pv_systems.delete(self)
     end
 
     def check_for_errors
       errors = []
+      begin; inverter; rescue StandardError => e; errors << e.message; end
       return errors
     end
 
@@ -5210,9 +5416,12 @@ class HPXML < Object
       XMLHelper.add_element(pv_system, 'ArrayTilt', @array_tilt, :float) unless @array_tilt.nil?
       XMLHelper.add_element(pv_system, 'MaxPowerOutput', @max_power_output, :float) unless @max_power_output.nil?
       XMLHelper.add_element(pv_system, 'NumberOfPanels', @number_of_panels, :integer) unless @number_of_panels.nil?
-      XMLHelper.add_element(pv_system, 'InverterEfficiency', @inverter_efficiency, :float, @inverter_efficiency_isdefaulted) unless @inverter_efficiency.nil?
       XMLHelper.add_element(pv_system, 'SystemLossesFraction', @system_losses_fraction, :float, @system_losses_fraction_isdefaulted) unless @system_losses_fraction.nil?
       XMLHelper.add_element(pv_system, 'YearModulesManufactured', @year_modules_manufactured, :integer) unless @year_modules_manufactured.nil?
+      if not @inverter_idref.nil?
+        attached_to_inverter = XMLHelper.add_element(pv_system, 'AttachedToInverter')
+        XMLHelper.add_attribute(attached_to_inverter, 'idref', @inverter_idref)
+      end
       XMLHelper.add_extension(pv_system, 'NumberofBedroomsServed', @number_of_bedrooms_served, :integer) unless @number_of_bedrooms_served.nil?
     end
 
@@ -5229,13 +5438,69 @@ class HPXML < Object
       @array_tilt = XMLHelper.get_value(pv_system, 'ArrayTilt', :float)
       @max_power_output = XMLHelper.get_value(pv_system, 'MaxPowerOutput', :float)
       @number_of_panels = XMLHelper.get_value(pv_system, 'NumberOfPanels', :integer)
-      @inverter_efficiency = XMLHelper.get_value(pv_system, 'InverterEfficiency', :float)
       @system_losses_fraction = XMLHelper.get_value(pv_system, 'SystemLossesFraction', :float)
       @year_modules_manufactured = XMLHelper.get_value(pv_system, 'YearModulesManufactured', :integer)
+      @inverter_idref = HPXML::get_idref(XMLHelper.get_element(pv_system, 'AttachedToInverter'))
       @number_of_bedrooms_served = XMLHelper.get_value(pv_system, 'extension/NumberofBedroomsServed', :integer)
     end
   end
 
+  class Inverters < BaseArrayElement
+    def add(**kwargs)
+      self << Inverter.new(@hpxml_object, **kwargs)
+    end
+
+    def from_oga(hpxml)
+      return if hpxml.nil?
+
+      XMLHelper.get_elements(hpxml, 'Building/BuildingDetails/Systems/Photovoltaics/Inverter').each do |inverter|
+        self << Inverter.new(@hpxml_object, inverter)
+      end
+    end
+  end
+
+  class Inverter < BaseElement
+    ATTRS = [:id, :inverter_efficiency]
+    attr_accessor(*ATTRS)
+
+    def pv_system
+      return if @id.nil?
+
+      @hpxml_object.pv_systems.each do |pv|
+        next unless @id == pv.inverter_idref
+
+        return pv
+      end
+    end
+
+    def delete
+      @hpxml_object.inverters.delete(self)
+    end
+
+    def check_for_errors
+      errors = []
+      begin; pv_system; rescue StandardError => e; errors << e.message; end
+      return errors
+    end
+
+    def to_oga(doc)
+      return if nil?
+
+      photovoltaics = XMLHelper.create_elements_as_needed(doc, ['HPXML', 'Building', 'BuildingDetails', 'Systems', 'Photovoltaics'])
+      inverter = XMLHelper.add_element(photovoltaics, 'Inverter')
+      sys_id = XMLHelper.add_element(inverter, 'SystemIdentifier')
+      XMLHelper.add_attribute(sys_id, 'id', @id)
+      XMLHelper.add_element(inverter, 'InverterEfficiency', @inverter_efficiency, :float, @inverter_efficiency_isdefaulted) unless @inverter_efficiency.nil?
+    end
+
+    def from_oga(inverter)
+      return if inverter.nil?
+
+      @id = HPXML::get_id(inverter)
+      @inverter_efficiency = XMLHelper.get_value(inverter, 'InverterEfficiency', :float)
+    end
+  end
+
   class Generators < BaseArrayElement
     def add(**kwargs)
       self << Generator.new(@hpxml_object, **kwargs)
@@ -5387,7 +5652,7 @@ class HPXML < Object
   class ClothesWasher < BaseElement
     ATTRS = [:id, :location, :modified_energy_factor, :integrated_modified_energy_factor,
              :rated_annual_kwh, :label_electric_rate, :label_gas_rate, :label_annual_gas_cost,
-             :capacity, :label_usage, :usage_multiplier, :is_shared_appliance, :number_of_units,
+             :capacity, :label_usage, :usage_multiplier, :is_shared_appliance, :count,
              :number_of_units_served, :water_heating_system_idref, :hot_water_distribution_idref,
              :weekday_fractions, :weekend_fractions, :monthly_multipliers]
 
@@ -5433,7 +5698,7 @@ class HPXML < Object
       clothes_washer = XMLHelper.add_element(appliances, 'ClothesWasher')
       sys_id = XMLHelper.add_element(clothes_washer, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
-      XMLHelper.add_element(clothes_washer, 'NumberofUnits', @number_of_units, :integer) unless @number_of_units.nil?
+      XMLHelper.add_element(clothes_washer, 'Count', @count, :integer) unless @count.nil?
       XMLHelper.add_element(clothes_washer, 'IsSharedAppliance', @is_shared_appliance, :boolean, @is_shared_appliance_isdefaulted) unless @is_shared_appliance.nil?
       XMLHelper.add_element(clothes_washer, 'NumberofUnitsServed', @number_of_units_served, :integer) unless @number_of_units_served.nil?
       if not @water_heating_system_idref.nil?
@@ -5462,7 +5727,7 @@ class HPXML < Object
       return if clothes_washer.nil?
 
       @id = HPXML::get_id(clothes_washer)
-      @number_of_units = XMLHelper.get_value(clothes_washer, 'NumberofUnits', :integer)
+      @count = XMLHelper.get_value(clothes_washer, 'Count', :integer)
       @is_shared_appliance = XMLHelper.get_value(clothes_washer, 'IsSharedAppliance', :boolean)
       @number_of_units_served = XMLHelper.get_value(clothes_washer, 'NumberofUnitsServed', :integer)
       @water_heating_system_idref = HPXML::get_idref(XMLHelper.get_element(clothes_washer, 'AttachedToWaterHeatingSystem'))
@@ -5499,7 +5764,7 @@ class HPXML < Object
 
   class ClothesDryer < BaseElement
     ATTRS = [:id, :location, :fuel_type, :energy_factor, :combined_energy_factor, :control_type,
-             :usage_multiplier, :is_shared_appliance, :number_of_units, :number_of_units_served,
+             :usage_multiplier, :is_shared_appliance, :count, :number_of_units_served,
              :is_vented, :vented_flow_rate, :weekday_fractions, :weekend_fractions,
              :monthly_multipliers]
     attr_accessor(*ATTRS)
@@ -5520,7 +5785,7 @@ class HPXML < Object
       clothes_dryer = XMLHelper.add_element(appliances, 'ClothesDryer')
       sys_id = XMLHelper.add_element(clothes_dryer, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
-      XMLHelper.add_element(clothes_dryer, 'NumberofUnits', @number_of_units, :integer) unless @number_of_units.nil?
+      XMLHelper.add_element(clothes_dryer, 'Count', @count, :integer) unless @count.nil?
       XMLHelper.add_element(clothes_dryer, 'IsSharedAppliance', @is_shared_appliance, :boolean, @is_shared_appliance_isdefaulted) unless @is_shared_appliance.nil?
       XMLHelper.add_element(clothes_dryer, 'NumberofUnitsServed', @number_of_units_served, :integer) unless @number_of_units_served.nil?
       XMLHelper.add_element(clothes_dryer, 'Location', @location, :string, @location_isdefaulted) unless @location.nil?
@@ -5540,7 +5805,7 @@ class HPXML < Object
       return if clothes_dryer.nil?
 
       @id = HPXML::get_id(clothes_dryer)
-      @number_of_units = XMLHelper.get_value(clothes_dryer, 'NumberofUnits', :integer)
+      @count = XMLHelper.get_value(clothes_dryer, 'Count', :integer)
       @is_shared_appliance = XMLHelper.get_value(clothes_dryer, 'IsSharedAppliance', :boolean)
       @number_of_units_served = XMLHelper.get_value(clothes_dryer, 'NumberofUnitsServed', :integer)
       @location = XMLHelper.get_value(clothes_dryer, 'Location', :string)
@@ -5952,7 +6217,7 @@ class HPXML < Object
   end
 
   class LightingGroup < BaseElement
-    ATTRS = [:id, :location, :fraction_of_units_in_location, :lighting_type]
+    ATTRS = [:id, :location, :fraction_of_units_in_location, :lighting_type, :kwh_per_year]
     attr_accessor(*ATTRS)
 
     def delete
@@ -5977,6 +6242,11 @@ class HPXML < Object
         lighting_type = XMLHelper.add_element(lighting_group, 'LightingType')
         XMLHelper.add_element(lighting_type, @lighting_type)
       end
+      if not @kwh_per_year.nil?
+        lighting_load = XMLHelper.add_element(lighting_group, 'Load')
+        XMLHelper.add_element(lighting_load, 'Units', UnitsKwhPerYear, :string)
+        XMLHelper.add_element(lighting_load, 'Value', @kwh_per_year, :float, @kwh_per_year_isdefaulted)
+      end
     end
 
     def from_oga(lighting_group)
@@ -5986,6 +6256,7 @@ class HPXML < Object
       @location = XMLHelper.get_value(lighting_group, 'Location', :string)
       @fraction_of_units_in_location = XMLHelper.get_value(lighting_group, 'FractionofUnitsInLocation', :float)
       @lighting_type = XMLHelper.get_child_name(lighting_group, 'LightingType')
+      @kwh_per_year = XMLHelper.get_value(lighting_group, "Load[Units='#{UnitsKwhPerYear}']/Value", :float)
     end
   end
 
@@ -6083,7 +6354,7 @@ class HPXML < Object
   end
 
   class CeilingFan < BaseElement
-    ATTRS = [:id, :efficiency, :quantity, :weekday_fractions, :weekend_fractions, :monthly_multipliers]
+    ATTRS = [:id, :efficiency, :count, :weekday_fractions, :weekend_fractions, :monthly_multipliers]
     attr_accessor(*ATTRS)
 
     def delete
@@ -6107,7 +6378,7 @@ class HPXML < Object
         XMLHelper.add_element(airflow, 'FanSpeed', 'medium', :string)
         XMLHelper.add_element(airflow, 'Efficiency', @efficiency, :float, @efficiency_isdefaulted)
       end
-      XMLHelper.add_element(ceiling_fan, 'Quantity', @quantity, :integer, @quantity_isdefaulted) unless @quantity.nil?
+      XMLHelper.add_element(ceiling_fan, 'Count', @count, :integer, @count_isdefaulted) unless @count.nil?
       XMLHelper.add_extension(ceiling_fan, 'WeekdayScheduleFractions', @weekday_fractions, :string, @weekday_fractions_isdefaulted) unless @weekday_fractions.nil?
       XMLHelper.add_extension(ceiling_fan, 'WeekendScheduleFractions', @weekend_fractions, :string, @weekend_fractions_isdefaulted) unless @weekend_fractions.nil?
       XMLHelper.add_extension(ceiling_fan, 'MonthlyScheduleMultipliers', @monthly_multipliers, :string, @monthly_multipliers_isdefaulted) unless @monthly_multipliers.nil?
@@ -6116,7 +6387,7 @@ class HPXML < Object
     def from_oga(ceiling_fan)
       @id = HPXML::get_id(ceiling_fan)
       @efficiency = XMLHelper.get_value(ceiling_fan, "Airflow[FanSpeed='medium']/Efficiency", :float)
-      @quantity = XMLHelper.get_value(ceiling_fan, 'Quantity', :integer)
+      @count = XMLHelper.get_value(ceiling_fan, 'Count', :integer)
       @weekday_fractions = XMLHelper.get_value(ceiling_fan, 'extension/WeekdayScheduleFractions', :string)
       @weekend_fractions = XMLHelper.get_value(ceiling_fan, 'extension/WeekendScheduleFractions', :string)
       @monthly_multipliers = XMLHelper.get_value(ceiling_fan, 'extension/MonthlyScheduleMultipliers', :string)
@@ -6354,7 +6625,7 @@ class HPXML < Object
   end
 
   class PlugLoad < BaseElement
-    ATTRS = [:id, :plug_load_type, :kWh_per_year, :frac_sensible, :frac_latent, :usage_multiplier,
+    ATTRS = [:id, :plug_load_type, :kwh_per_year, :frac_sensible, :frac_latent, :usage_multiplier,
              :weekday_fractions, :weekend_fractions, :monthly_multipliers]
     attr_accessor(*ATTRS)
 
@@ -6375,10 +6646,10 @@ class HPXML < Object
       sys_id = XMLHelper.add_element(plug_load, 'SystemIdentifier')
       XMLHelper.add_attribute(sys_id, 'id', @id)
       XMLHelper.add_element(plug_load, 'PlugLoadType', @plug_load_type, :string) unless @plug_load_type.nil?
-      if not @kWh_per_year.nil?
+      if not @kwh_per_year.nil?
         load = XMLHelper.add_element(plug_load, 'Load')
         XMLHelper.add_element(load, 'Units', UnitsKwhPerYear, :string)
-        XMLHelper.add_element(load, 'Value', @kWh_per_year, :float, @kWh_per_year_isdefaulted)
+        XMLHelper.add_element(load, 'Value', @kwh_per_year, :float, @kwh_per_year_isdefaulted)
       end
       XMLHelper.add_extension(plug_load, 'FracSensible', @frac_sensible, :float, @frac_sensible_isdefaulted) unless @frac_sensible.nil?
       XMLHelper.add_extension(plug_load, 'FracLatent', @frac_latent, :float, @frac_latent_isdefaulted) unless @frac_latent.nil?
@@ -6391,7 +6662,7 @@ class HPXML < Object
     def from_oga(plug_load)
       @id = HPXML::get_id(plug_load)
       @plug_load_type = XMLHelper.get_value(plug_load, 'PlugLoadType', :string)
-      @kWh_per_year = XMLHelper.get_value(plug_load, "Load[Units='#{UnitsKwhPerYear}']/Value", :float)
+      @kwh_per_year = XMLHelper.get_value(plug_load, "Load[Units='#{UnitsKwhPerYear}']/Value", :float)
       @frac_sensible = XMLHelper.get_value(plug_load, 'extension/FracSensible', :float)
       @frac_latent = XMLHelper.get_value(plug_load, 'extension/FracLatent', :float)
       @usage_multiplier = XMLHelper.get_value(plug_load, 'extension/UsageMultiplier', :float)
@@ -6514,7 +6785,7 @@ class HPXML < Object
           surf.class::ATTRS.each do |attribute|
             next if attribute.to_s.end_with? '_isdefaulted'
             next if attrs_to_ignore.include? attribute
-            next if (surf_type == :foundation_walls) && (attribute == :azimuth) # Azimuth of foundation walls is irrelevant
+            next if (surf_type == :foundation_walls) && ([:azimuth, :orientation].include? attribute) # Azimuth of foundation walls is irrelevant
             next if surf.send(attribute) == surf2.send(attribute)
 
             match = false
@@ -6552,14 +6823,6 @@ class HPXML < Object
     end
   end
 
-  def delete_tiny_surfaces()
-    (@rim_joists + @walls + @foundation_walls + @floors + @roofs + @windows + @skylights + @doors + @slabs).reverse_each do |surface|
-      next if surface.area.nil? || (surface.area > 1.0)
-
-      surface.delete
-    end
-  end
-
   def delete_adiabatic_subsurfaces()
     @doors.reverse_each do |door|
       next if door.wall.nil?