urbanopt-cli 0.8.3 → 0.9.0

data/example_files/mappers/class_project_workflow.osw

@@ -0,0 +1,328 @@
+{
+  "seed_file": null,
+  "weather_file": null,
+  "measure_paths": [],
+  "file_paths": [],
+  "run_directory": null,
+  "steps": [
+    {
+      "measure_dir_name": "BuildResidentialModel",
+      "arguments": {
+        "__SKIP__": true
+      }
+    },{
+      "measure_dir_name": "set_run_period",
+      "arguments": {
+        "__SKIP__": true,
+        "timesteps_per_hour": 4,
+        "begin_date": "2019-06-01",
+        "end_date": "2019-09-30"
+      }
+    },{
+      "measure_dir_name": "ChangeBuildingLocation",
+      "arguments": {
+        "__SKIP__": true,
+        "weather_file_name": "USA_NY_Buffalo-Greater.Buffalo.Intl.AP.725280_TMY3.epw",
+        "climate_zone": "ASHRAE 169-2013-6A"
+      }
+    },{
+      "measure_dir_name": "create_bar_from_building_type_ratios",
+      "arguments": {
+        "__SKIP__": true,
+        "bldg_type_a": null,
+        "bldg_type_a_num_units": 0,
+        "bldg_type_b": "SmallOffice",
+        "bldg_type_b_fract_bldg_area": 0,
+        "bldg_type_b_num_units": 0,
+        "bldg_type_c": "SmallOffice",
+        "bldg_type_c_fract_bldg_area": 0,
+        "bldg_type_c_num_units": 0,
+        "bldg_type_d": "SmallOffice",
+        "bldg_type_d_fract_bldg_area": 0,
+        "bldg_type_d_num_units": 0,
+        "single_floor_area": null,
+        "floor_height": 0,
+        "num_stories_above_grade": null,
+        "num_stories_below_grade": null,
+        "building_rotation": 0,
+        "template": "90.1-2004",
+        "ns_to_ew_ratio": 0,
+        "wwr": 0,
+        "party_wall_fraction": 0,
+        "story_multiplier": "None",
+        "bar_division_method": "Multiple Space Types - Individual Stories Sliced"
+      }
+    },{
+      "name": "create_typical_building_from_model 1",
+      "measure_dir_name": "create_typical_building_from_model",
+      "arguments": {
+        "__SKIP__": true,
+        "add_hvac": false,
+        "add_refrigeration": false
+      }
+    },{
+      "measure_dir_name": "blended_space_type_from_model",
+      "arguments": {
+        "__SKIP__": true,
+        "blend_method": "Building Story"
+      }
+    },{
+      "measure_dir_name": "add_ev_load",
+      "arguments": {
+        "__SKIP__": true,
+        "chg_station_type": "Typical Public",
+        "delay_type": "Min Delay",
+        "charge_behavior": "Business as Usual",
+        "ev_use_model_occupancy": false,
+        "ev_percent": 100
+      }
+    },{
+      "measure_dir_name": "add_ems_to_control_ev_charging",
+      "arguments": {
+        "__SKIP__": true,
+        "curtailment_frac": 0.5
+      }
+    },{
+      "measure_dir_name": "AddOverhangsByProjectionFactor",
+      "arguments": {
+        "__SKIP__": true,
+        "projection_factor": "0.5",
+        "facade": "South",
+        "remove_ext_space_shading": false
+      }
+    },{
+      "measure_dir_name": "urban_geometry_creation_zoning",
+      "arguments": {
+        "__SKIP__": true,
+        "geojson_file": "exportGeo.json",
+        "feature_id": "5",
+        "surrounding_buildings": "None"
+      }
+    },{
+      "name": "create_typical_building_from_model 2",
+      "measure_dir_name": "create_typical_building_from_model",
+      "arguments": {
+        "__SKIP__": true,
+        "template": "90.1-2004",
+        "add_constructions": false,
+        "add_space_type_loads": false,
+        "add_elevators": false,
+        "add_exterior_lights": false,
+        "add_exhaust": false,
+        "add_swh": false,
+        "add_refrigeration": false,
+        "remove_objects": false,
+        "system_type": "Inferred",
+        "add_hvac": true,
+        "use_upstream_args": false
+      }
+    },{
+      "measure_dir_name": "add_ems_emissions_reporting",
+      "arguments": {
+        "__SKIP__": true,
+        "future_subregion": "RMPAc",
+        "hourly_historical_subregion": "Rocky Mountains",
+        "annual_historical_subregion": "RMPA",
+        "future_year": 2020,
+        "hourly_historical_year": 2019,
+        "annual_historical_year": 2019
+      }
+    },{
+      "measure_dir_name":"PredictedMeanVote",
+      "arguments":{
+        "__SKIP__": true,
+        "comfortWarnings":true,
+        "workEfficiencySchedule":"Work Efficiency Schedule",
+        "clothingSchedule":"Clothing Schedule",
+        "airVelocitySchedule":"Air Velocity Schedule"
+      }
+    },{
+      "measure_dir_name": "EnableDemandControlledVentilation",
+      "arguments": {
+        "__SKIP__": true,
+        "dcv_type": "EnableDCV"
+      }
+    },{
+      "measure_dir_name": "EnableEconomizerControl",
+      "arguments": {
+        "__SKIP__": true,
+        "economizer_type": "FixedDryBulb",
+        "econoMaxDryBulbTemp": 69.0,
+        "econoMinDryBulbTemp": -148.0
+      }
+    },{
+      "measure_dir_name": "IncreaseInsulationRValueForExteriorWalls",
+      "arguments": {
+        "__SKIP__": true,
+        "r_value": 13.0,
+        "allow_reduction": false,
+        "material_cost_increase_ip": 0.0,
+        "one_time_retrofit_cost_ip": 0.0,
+        "years_until_retrofit_cost": 0
+      }
+    },{
+      "measure_dir_name": "IncreaseInsulationRValueForRoofs",
+      "arguments": {
+        "__SKIP__": true,
+        "r_value": 30.0,
+        "allow_reduction": false,
+        "material_cost_increase_ip": 0.0,
+        "one_time_retrofit_cost_ip": 0.0,
+        "years_until_retrofit_cost": 0
+      }
+    },{
+      "measure_dir_name": "ImproveMotorEfficiency",
+      "arguments": {
+        "__SKIP__": true,
+        "object": "*All Plant and Air Loops*",
+        "motor_eff": 96.0,
+        "remove_costs": false,
+        "material_cost": 0.0,
+        "demolition_cost": 0.0,
+        "years_until_costs_start": 0,
+        "demo_cost_initial_const": false,
+        "expected_life": 20,
+        "om_cost": 0.0,
+        "om_frequency": 1
+      }
+    },{
+      "measure_dir_name": "ImproveFanBeltEfficiency",
+      "arguments": {
+        "__SKIP__": true,
+        "object": "*All Air Loops*",
+        "motor_eff": 3.0,
+        "remove_costs": false,
+        "material_cost": 0.0,
+        "demolition_cost": 0.0,
+        "years_until_costs_start": 0,
+        "demo_cost_initial_const": false,
+        "expected_life": 20,
+        "om_cost": 0.0,
+        "om_frequency": 1
+      }
+    },{
+      "measure_dir_name": "ReduceElectricEquipmentLoadsByPercentage",
+      "arguments": {
+        "__SKIP__": true,
+        "elecequip_power_reduction_percent": 20
+      }
+    },{
+      "measure_dir_name": "ReduceLightingLoadsByPercentage",
+      "arguments": {
+        "__SKIP__": true,
+        "lighting_power_reduction_percent": 30
+      }
+    },{
+      "measure_dir_name": "ReduceSpaceInfiltrationByPercentage",
+      "arguments": {
+        "__SKIP__": true,
+        "space_type": "*Entire Building*",
+        "space_infiltration_reduction_percent": 30.0,
+        "constant_coefficient": 1.0,
+        "temperature_coefficient": 0.0,
+        "wind_speed_coefficient": 0.0,
+        "wind_speed_squared_coefficient": 0.0,
+        "alter_coef": true,
+        "material_and_installation_cost": 0.0,
+        "om_cost": 0.0,
+        "om_frequency": 1
+      }
+    },{
+      "measure_dir_name": "ReduceVentilationByPercentage",
+      "arguments": {
+        "__SKIP__": true,
+        "space_type": "*Entire Building*",
+        "design_spec_outdoor_air_reduction_percent": 30.0
+      }
+    },{
+      "measure_dir_name": "ShiftScheduleByType",
+      "arguments": {
+        "__SKIP__": true,
+        "shift_value": -1,
+        "schedchoice": "CoolHeat"
+      }
+    },{
+      "measure_dir_name": "add_central_ice_storage",
+      "arguments": {
+        "__SKIP__": true,
+        "chiller_resize_factor": 0.8,
+        "discharge_start": "08:00",
+        "discharge_end": "20:00",
+        "charge_start": "23:00",
+        "inter_sp": 46
+        }
+    },{
+      "measure_dir_name":"add_hpwh",
+      "arguments":{
+        "__SKIP__":true
+        }
+    },{
+      "measure_dir_name": "add_packaged_ice_storage",
+      "arguments": {
+        "__SKIP__": true,
+        "size_mult": "0.75",
+        "charge_start": "23:00"
+      }
+    },{
+      "measure_dir_name":"export_time_series_modelica",
+      "arguments":{
+        "__SKIP__":false
+      }
+    },{
+      "measure_dir_name":"export_modelica_loads",
+      "arguments":{
+        "__SKIP__":false
+      }
+    },{
+      "measure_dir_name": "default_feature_reports",
+      "arguments": {
+        "feature_id": null,
+        "feature_name": null,
+        "feature_type": null,
+        "feature_location": null
+      }
+    },{
+      "measure_dir_name": "openstudio_results",
+      "arguments": {
+        "__SKIP__": true
+      }
+    },
+    {
+      "measure_dir_name": "envelope_and_internal_load_breakdown",
+      "arguments": {
+        "__SKIP__": true
+      }
+    },
+    {
+      "measure_dir_name": "generic_qaqc",
+      "arguments": {
+        "template": "90.1-2004",
+        "check_eui_reasonableness": true,
+        "check_eui_reasonableness_tol": 0.25,
+        "check_eui_by_end_use": true,
+        "check_eui_by_end_use_tol": 0.25,
+        "check_mech_sys_part_load_eff": true,
+        "check_mech_sys_part_load_eff_tol": 0.25,
+        "check_mech_sys_capacity": false,
+        "check_simultaneous_heating_and_cooling": true,
+        "check_simultaneous_heating_and_cooling_max_tol": 0.25,
+        "check_internal_loads": true,
+        "check_internal_loads_tol": 0.25,
+        "check_schedules": true,
+        "check_schedules_tol": 0.25,
+        "check_envelope_conductance": true,
+        "check_envelope_conductance_tol": 0.25,
+        "check_domestic_hot_water": true,
+        "check_domestic_hot_water_tol": 0.50,
+        "check_mech_sys_efficiency": true,
+        "check_mech_sys_efficiency_tol": 0.25,
+        "check_mech_sys_type": false,
+        "check_supply_air_and_thermostat_temp_difference": true,
+        "check_supply_air_and_thermostat_temp_difference_tol": 4.0,
+        "__SKIP__": true
+      }
+    }
+  ],
+  "name": null,
+  "description": null
+}

data/example_files/mappers/createbar_workflow.osw

@@ -85,25 +85,11 @@
         "__SKIP__": true,
         "lighting_power_reduction_percent": 30
       } 
-    },{
-      "measure_dir_name": "default_feature_reports",
-      "arguments": {
-        "feature_id": null,
-        "feature_name": null,
-        "feature_type": null,
-        "feature_location": null
-      }
-    },
-    {
-      "measure_dir_name": "openstudio_results",
-      "arguments": {
-        "__SKIP__": true
-      }
     },
     {
       "measure_dir_name": "envelope_and_internal_load_breakdown",
       "arguments": {
-        "__SKIP__": true
+        "__SKIP__": false
       }
     },
     {
@@ -132,7 +118,21 @@
         "check_mech_sys_type": false,
         "check_supply_air_and_thermostat_temp_difference": true,
         "check_supply_air_and_thermostat_temp_difference_tol": 4.0,
-        "__SKIP__": true
+        "__SKIP__": false
+      }
+    },{
+      "measure_dir_name": "default_feature_reports",
+      "arguments": {
+        "feature_id": null,
+        "feature_name": null,
+        "feature_type": null,
+        "feature_location": null
+      }
+    },
+    {
+      "measure_dir_name": "openstudio_results",
+      "arguments": {
+        "__SKIP__": false
       }
     }
   ],

data/example_files/measures/BuildResidentialModel/measure.rb

@@ -255,9 +255,15 @@ class BuildResidentialModel < OpenStudio::Measure::ModelMeasure
         building_type = 'Multifamily'
       end
 
+      unit_model.getSpaces.each do |unit_space|
+        unit_space_type = OpenStudio::Model::SpaceType.new(unit_model)
+        unit_space_type.setStandardsSpaceType(unit_space.name.to_s)
+        unit_space.setSpaceType(unit_space_type)
+      end
+
       unit_model.getSpaceTypes.each do |space_type|
         next unless space_type.standardsSpaceType.is_initialized
-        next if space_type.standardsSpaceType.get != 'living space'
+        next if !space_type.standardsSpaceType.get.include?('living space')
 
         space_type.setStandardsBuildingType(building_type)
       end