urbanopt-cli 0.8.2 → 0.9.0

data/example_files/resources/hpxml-measures/HPXMLtoOpenStudio/resources/waterheater.rb

@@ -3,23 +3,15 @@
 class Waterheater
   def self.apply_tank(model, runner, loc_space, loc_schedule, water_heating_system, ec_adj, solar_thermal_system, eri_version, schedules_file)
     solar_fraction = get_water_heater_solar_fraction(water_heating_system, solar_thermal_system)
-    set_temp_c = get_set_temp_c(water_heating_system.temperature, water_heating_system.water_heater_type)
-    default_set_temp_c = get_set_temp_c(Waterheater.get_default_hot_water_temperature(eri_version), water_heating_system.water_heater_type)
-    default_set_temp_c = set_temp_c if !set_temp_c.nil?
-    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, default_set_temp_c)
-
-    new_pump = create_new_pump(model)
-    new_pump.addToNode(loop.supplyInletNode)
-
-    new_manager = create_new_schedule_manager(model, default_set_temp_c)
-    new_manager.addToNode(loop.supplyOutletNode)
+    t_set_c = get_t_set_c(water_heating_system.temperature, water_heating_system.water_heater_type)
+    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, t_set_c, eri_version)
 
     act_vol = calc_storage_tank_actual_vol(water_heating_system.tank_volume, water_heating_system.fuel_type)
     u, ua, eta_c = calc_tank_UA(act_vol, water_heating_system, solar_fraction)
     new_heater = create_new_heater(name: Constants.ObjectNameWaterHeater,
                                    water_heating_system: water_heating_system,
                                    act_vol: act_vol,
-                                   t_set_c: set_temp_c,
+                                   t_set_c: t_set_c,
                                    loc_space: loc_space,
                                    loc_schedule: loc_schedule,
                                    model: model,
@@ -31,31 +23,23 @@ class Waterheater
     loop.addSupplyBranchForComponent(new_heater)
 
     add_ec_adj(model, new_heater, ec_adj, loc_space, water_heating_system)
-    add_desuperheater(model, runner, water_heating_system, new_heater, loc_space, loc_schedule, loop, eri_version)
+    add_desuperheater(model, runner, water_heating_system, new_heater, loc_space, loc_schedule, loop)
 
     return loop
   end
 
-  def self.apply_tankless(model, runner, loc_space, loc_schedule, water_heating_system, ec_adj, nbeds, solar_thermal_system, eri_version, schedules_file)
+  def self.apply_tankless(model, runner, loc_space, loc_schedule, water_heating_system, ec_adj, solar_thermal_system, eri_version, schedules_file)
     water_heating_system.heating_capacity = 100000000000.0
     solar_fraction = get_water_heater_solar_fraction(water_heating_system, solar_thermal_system)
-    set_temp_c = get_set_temp_c(water_heating_system.temperature, water_heating_system.water_heater_type)
-    default_set_temp_c = get_set_temp_c(Waterheater.get_default_hot_water_temperature(eri_version), water_heating_system.water_heater_type)
-    default_set_temp_c = set_temp_c if !set_temp_c.nil?
-    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, default_set_temp_c)
-
-    new_pump = create_new_pump(model)
-    new_pump.addToNode(loop.supplyInletNode)
-
-    new_manager = create_new_schedule_manager(model, default_set_temp_c)
-    new_manager.addToNode(loop.supplyOutletNode)
+    t_set_c = get_t_set_c(water_heating_system.temperature, water_heating_system.water_heater_type)
+    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, t_set_c, eri_version)
 
     act_vol = 1.0
-    u, ua, eta_c = calc_tank_UA(act_vol, water_heating_system, solar_fraction)
+    _u, ua, eta_c = calc_tank_UA(act_vol, water_heating_system, solar_fraction)
     new_heater = create_new_heater(name: Constants.ObjectNameWaterHeater,
                                    water_heating_system: water_heating_system,
                                    act_vol: act_vol,
-                                   t_set_c: set_temp_c,
+                                   t_set_c: t_set_c,
                                    loc_space: loc_space,
                                    loc_schedule: loc_schedule,
                                    model: model,
@@ -67,7 +51,7 @@ class Waterheater
     loop.addSupplyBranchForComponent(new_heater)
 
     add_ec_adj(model, new_heater, ec_adj, loc_space, water_heating_system)
-    add_desuperheater(model, runner, water_heating_system, new_heater, loc_space, loc_schedule, loop, eri_version)
+    add_desuperheater(model, runner, water_heating_system, new_heater, loc_space, loc_schedule, loop)
 
     return loop
   end
@@ -75,16 +59,8 @@ class Waterheater
   def self.apply_heatpump(model, runner, loc_space, loc_schedule, weather, water_heating_system, ec_adj, solar_thermal_system, living_zone, eri_version, schedules_file)
     obj_name_hpwh = Constants.ObjectNameWaterHeater
     solar_fraction = get_water_heater_solar_fraction(water_heating_system, solar_thermal_system)
-    set_temp_c = get_set_temp_c(water_heating_system.temperature, water_heating_system.water_heater_type)
-    default_set_temp_c = get_set_temp_c(Waterheater.get_default_hot_water_temperature(eri_version), water_heating_system.water_heater_type)
-    default_set_temp_c = set_temp_c if !set_temp_c.nil?
-    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, default_set_temp_c)
-
-    new_pump = create_new_pump(model)
-    new_pump.addToNode(loop.supplyInletNode)
-
-    new_manager = create_new_schedule_manager(model, default_set_temp_c)
-    new_manager.addToNode(loop.supplyOutletNode)
+    t_set_c = get_t_set_c(water_heating_system.temperature, water_heating_system.water_heater_type)
+    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, t_set_c, eri_version)
 
     h_tank = 0.0188 * water_heating_system.tank_volume + 0.0935 # Linear relationship that gets GE height at 50 gal and AO Smith height at 80 gal
 
@@ -97,11 +73,11 @@ class Waterheater
     hpwh_rhamb.setName("#{obj_name_hpwh} RHamb act")
     hpwh_rhamb.setValue(0.5)
 
+    # Note: These get overwritten by EMS later, see HPWH Control program
+    top_element_setpoint_schedule = OpenStudio::Model::ScheduleConstant.new(model)
+    top_element_setpoint_schedule.setName("#{obj_name_hpwh} TopElementSetpoint")
     bottom_element_setpoint_schedule = OpenStudio::Model::ScheduleConstant.new(model)
     bottom_element_setpoint_schedule.setName("#{obj_name_hpwh} BottomElementSetpoint")
-    bottom_element_setpoint_schedule.setValue(-60)
-
-    water_heater_offset = 9.0 # deg-C
 
     setpoint_schedule = nil
     if not schedules_file.nil?
@@ -114,28 +90,16 @@ class Waterheater
         # Actuated schedule
         control_setpoint_schedule = OpenStudio::Model::ScheduleConstant.new(model)
         control_setpoint_schedule.setName("#{obj_name_hpwh} ControlSetpoint")
-        control_setpoint_schedule.setValue(default_set_temp_c)
-
-        # Note: This gets overwritten by EMS later, see HPWH Control program
-        top_element_setpoint_schedule = OpenStudio::Model::ScheduleConstant.new(model)
-        top_element_setpoint_schedule.setName("#{obj_name_hpwh} TopElementSetpoint")
-        top_element_setpoint_schedule.setValue(default_set_temp_c - water_heater_offset)
       end
     end
     if setpoint_schedule.nil?
-      tset_C = UnitConversions.convert(water_heating_system.temperature, 'F', 'C')
-
       setpoint_schedule = OpenStudio::Model::ScheduleConstant.new(model)
       setpoint_schedule.setName("#{obj_name_hpwh} Setpoint")
-      setpoint_schedule.setValue(tset_C)
+      setpoint_schedule.setValue(t_set_c)
 
       control_setpoint_schedule = setpoint_schedule
-
-      top_element_setpoint_schedule = OpenStudio::Model::ScheduleConstant.new(model)
-      top_element_setpoint_schedule.setName("#{obj_name_hpwh} TopElementSetpoint")
-      top_element_setpoint_schedule.setValue(tset_C - water_heater_offset)
     else
-      runner.registerWarning("Both '#{SchedulesFile::ColumnWaterHeaterSetpoint}' schedule file and setpoint temperature provided; the latter will be ignored.") if !tset_C.nil?
+      runner.registerWarning("Both '#{SchedulesFile::ColumnWaterHeaterSetpoint}' schedule file and setpoint temperature provided; the latter will be ignored.") if !t_set_c.nil?
     end
 
     airflow_rate = 181.0 # cfm
@@ -149,7 +113,7 @@ class Waterheater
     tank = setup_hpwh_stratified_tank(model, water_heating_system, obj_name_hpwh, h_tank, solar_fraction, hpwh_tamb, bottom_element_setpoint_schedule, top_element_setpoint_schedule)
     loop.addSupplyBranchForComponent(tank)
 
-    add_desuperheater(model, runner, water_heating_system, tank, loc_space, loc_schedule, loop, eri_version)
+    add_desuperheater(model, runner, water_heating_system, tank, loc_space, loc_schedule, loop)
 
     # Fan:SystemModel
     fan = setup_hpwh_fan(model, water_heating_system, obj_name_hpwh, airflow_rate)
@@ -159,7 +123,7 @@ class Waterheater
 
     # Amb temp & RH sensors, temp sensor shared across programs
     amb_temp_sensor, amb_rh_sensors = get_loc_temp_rh_sensors(model, obj_name_hpwh, loc_schedule, loc_space, living_zone)
-    hpwh_inlet_air_program = add_hpwh_inlet_air_and_zone_heat_gain_program(model, obj_name_hpwh, loc_space, loc_schedule, hpwh_tamb, hpwh_rhamb, tank, coil, fan, amb_temp_sensor, amb_rh_sensors)
+    hpwh_inlet_air_program = add_hpwh_inlet_air_and_zone_heat_gain_program(model, obj_name_hpwh, loc_space, hpwh_tamb, hpwh_rhamb, tank, coil, fan, amb_temp_sensor, amb_rh_sensors)
 
     # EMS for the HPWH control logic
     op_mode = water_heating_system.operating_mode
@@ -188,7 +152,7 @@ class Waterheater
     obj_name_combi = Constants.ObjectNameWaterHeater
 
     if water_heating_system.water_heater_type == HPXML::WaterHeaterTypeCombiStorage
-      if water_heating_system.standby_loss <= 0
+      if water_heating_system.standby_loss_value <= 0
         fail 'A negative indirect water heater standby loss was calculated, double check water heater inputs.'
       end
 
@@ -200,22 +164,14 @@ class Waterheater
       act_vol = 1.0
     end
 
-    set_temp_c = get_set_temp_c(water_heating_system.temperature, water_heating_system.water_heater_type)
-    default_set_temp_c = get_set_temp_c(Waterheater.get_default_hot_water_temperature(eri_version), water_heating_system.water_heater_type)
-    default_set_temp_c = set_temp_c if !set_temp_c.nil?
-    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, default_set_temp_c)
-
-    new_pump = create_new_pump(model)
-    new_pump.addToNode(loop.supplyInletNode)
-
-    new_manager = create_new_schedule_manager(model, default_set_temp_c)
-    new_manager.addToNode(loop.supplyOutletNode)
+    t_set_c = get_t_set_c(water_heating_system.temperature, water_heating_system.water_heater_type)
+    loop = create_new_loop(model, Constants.ObjectNamePlantLoopDHW, t_set_c, eri_version)
 
     # Create water heater
     new_heater = create_new_heater(name: obj_name_combi,
                                    water_heating_system: water_heating_system,
                                    act_vol: act_vol,
-                                   t_set_c: set_temp_c,
+                                   t_set_c: t_set_c,
                                    loc_space: loc_space,
                                    loc_schedule: loc_schedule,
                                    model: model,
@@ -230,12 +186,8 @@ class Waterheater
     new_heater.additionalProperties.setFeature('EnergyFactor', ef) # Used by reporting measure
 
     # Create alternate setpoint schedule for source side flow request
-    alternate_stp_sch = OpenStudio::Model::ScheduleConstant.new(model)
+    alternate_stp_sch = new_heater.setpointTemperatureSchedule.get.clone(model).to_Schedule.get
     alternate_stp_sch.setName("#{obj_name_combi} Alt Spt")
-    alt_temp = get_set_temp_c(water_heating_system.temperature, water_heating_system.water_heater_type)
-    default_alt_temp = get_set_temp_c(Waterheater.get_default_hot_water_temperature(eri_version), water_heating_system.water_heater_type)
-    default_alt_temp = alt_temp if !alt_temp.nil?
-    alternate_stp_sch.setValue(default_alt_temp)
     new_heater.setIndirectAlternateSetpointTemperatureSchedule(alternate_stp_sch)
 
     # Create setpoint schedule to specify source side temperature
@@ -305,7 +257,11 @@ class Waterheater
         tank_spt_sensor.setName("#{combi_sys_id} Setpoint Temperature")
         tank_spt_sensor.setKeyName(water_heater.setpointTemperatureSchedule.get.name.to_s)
         alt_spt_sch = water_heater.indirectAlternateSetpointTemperatureSchedule.get
-        altsch_actuator = OpenStudio::Model::EnergyManagementSystemActuator.new(alt_spt_sch, *EPlus::EMSActuatorScheduleConstantValue)
+        if alt_spt_sch.to_ScheduleConstant.is_initialized
+          altsch_actuator = OpenStudio::Model::EnergyManagementSystemActuator.new(alt_spt_sch, *EPlus::EMSActuatorScheduleConstantValue)
+        else
+          altsch_actuator = OpenStudio::Model::EnergyManagementSystemActuator.new(alt_spt_sch, *EPlus::EMSActuatorScheduleFileValue)
+        end
         altsch_actuator.setName("#{combi_sys_id} AltSchedOverride")
       end
       plant_loop.components.each do |c|
@@ -383,7 +339,7 @@ class Waterheater
       combi_ctrl_program.addLine("Set #{altsch_actuator.name} = 100") # Set the alternate setpoint temperature to highest level to ensure maximum source side flow rate
       combi_ctrl_program.addLine('Else')
       combi_ctrl_program.addLine("Set #{pump_actuator.name} = 0")
-      combi_ctrl_program.addLine("Set #{altsch_actuator.name} = #{alt_spt_sch.to_ScheduleConstant.get.value}")
+      combi_ctrl_program.addLine("Set #{altsch_actuator.name} = NULL")
       combi_ctrl_program.addLine('EndIf')
 
       # ProgramCallingManagers
@@ -605,7 +561,7 @@ class Waterheater
     storage_tank.setHeaterFuelType(EPlus::FuelTypeElectricity)
     storage_tank.setHeaterThermalEfficiency(1)
     storage_tank.ambientTemperatureSchedule.get.remove
-    set_wh_ambient(loc_space, loc_schedule, model, storage_tank)
+    set_wh_ambient(loc_space, loc_schedule, storage_tank)
     if fluid_type == Constants.FluidWater # Direct, make the storage tank a dummy tank with 0 tank losses
       storage_tank.setUniformSkinLossCoefficientperUnitAreatoAmbientTemperature(0.0)
     else
@@ -644,7 +600,7 @@ class Waterheater
     availability_manager.setColdNode(storage_tank.demandOutletModelObject.get.to_Node.get)
     availability_manager.setTemperatureDifferenceOnLimit(0)
     availability_manager.setTemperatureDifferenceOffLimit(0)
-    plant_loop.setAvailabilityManager(availability_manager)
+    plant_loop.addAvailabilityManager(availability_manager)
 
     # Add EMS code for SWH control (keeps the WH for the last hour if there's useful energy that can be delivered, E+ wouldn't always do this by default)
     # Sensors
@@ -918,7 +874,7 @@ class Waterheater
     return amb_temp_sensor, rh_sensors
   end
 
-  def self.add_hpwh_inlet_air_and_zone_heat_gain_program(model, obj_name_hpwh, loc_space, loc_schedule, hpwh_tamb, hpwh_rhamb, tank, coil, fan, amb_temp_sensor, amb_rh_sensors)
+  def self.add_hpwh_inlet_air_and_zone_heat_gain_program(model, obj_name_hpwh, loc_space, hpwh_tamb, hpwh_rhamb, tank, coil, fan, amb_temp_sensor, amb_rh_sensors)
     # EMS Actuators: Inlet T & RH, sensible and latent gains to the space
     tamb_act_actuator = OpenStudio::Model::EnergyManagementSystemActuator.new(hpwh_tamb, *EPlus::EMSActuatorScheduleConstantValue)
     tamb_act_actuator.setName("#{obj_name_hpwh} Tamb act")
@@ -1024,12 +980,16 @@ class Waterheater
       runner.registerWarning("Both '#{SchedulesFile::ColumnWaterHeaterOperatingMode}' schedule file and operating mode provided; the latter will be ignored.") if !op_mode.nil?
     end
 
+    t_offset = 9.0 # deg-C
+    min_temp_c = UnitConversions.convert(min_temp, 'F', 'C').round(2)
+    max_temp_c = UnitConversions.convert(max_temp, 'F', 'C').round(2)
+
     hpwh_ctrl_program = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
     hpwh_ctrl_program.setName("#{obj_name_hpwh} Control")
     hpwh_ctrl_program.addLine("Set #{hpwhschedoverride_actuator.name} = #{t_set_sensor.name}")
     # If in HP only mode: still enable elements if ambient temperature is out of bounds, otherwise disable elements
     if op_mode == HPXML::WaterHeaterOperatingModeHeatPumpOnly
-      hpwh_ctrl_program.addLine("If (#{amb_temp_sensor.name}<#{UnitConversions.convert(min_temp, 'F', 'C').round(2)}) || (#{amb_temp_sensor.name}>#{UnitConversions.convert(max_temp, 'F', 'C').round(2)})")
+      hpwh_ctrl_program.addLine("If (#{amb_temp_sensor.name}<#{min_temp_c}) || (#{amb_temp_sensor.name}>#{max_temp_c})")
       hpwh_ctrl_program.addLine("Set #{leschedoverride_actuator.name} = #{t_set_sensor.name}")
       hpwh_ctrl_program.addLine("Set #{ueschedoverride_actuator.name} = #{t_set_sensor.name}")
       hpwh_ctrl_program.addLine('Else')
@@ -1038,11 +998,11 @@ class Waterheater
       hpwh_ctrl_program.addLine('EndIf')
     else
       # First, check if ambient temperature is out of bounds for HP operation, if so enable lower element
-      hpwh_ctrl_program.addLine("If (#{amb_temp_sensor.name}<#{UnitConversions.convert(min_temp, 'F', 'C').round(2)}) || (#{amb_temp_sensor.name}>#{UnitConversions.convert(max_temp, 'F', 'C').round(2)})")
+      hpwh_ctrl_program.addLine("If (#{amb_temp_sensor.name}<#{min_temp_c}) || (#{amb_temp_sensor.name}>#{max_temp_c})")
       hpwh_ctrl_program.addLine("Set #{ueschedoverride_actuator.name} = #{t_set_sensor.name}")
       hpwh_ctrl_program.addLine("Set #{leschedoverride_actuator.name} = #{t_set_sensor.name}")
       hpwh_ctrl_program.addLine('Else')
-      hpwh_ctrl_program.addLine("Set #{ueschedoverride_actuator.name} = #{t_set_sensor.name} - 9.0")
+      hpwh_ctrl_program.addLine("Set #{ueschedoverride_actuator.name} = #{t_set_sensor.name} - #{t_offset}")
       hpwh_ctrl_program.addLine("Set #{leschedoverride_actuator.name} = 0")
       hpwh_ctrl_program.addLine('EndIf')
       # Scheduled operating mode: if in HP only mode, disable both elements (this will override prior logic)
@@ -1050,7 +1010,7 @@ class Waterheater
         hpwh_ctrl_program.addLine("If #{op_mode_sensor.name} == 1")
         hpwh_ctrl_program.addLine("Set #{ueschedoverride_actuator.name} = 0")
         hpwh_ctrl_program.addLine('Else')
-        hpwh_ctrl_program.addLine("Set #{ueschedoverride_actuator.name} = #{t_set_sensor.name} - 9.0")
+        hpwh_ctrl_program.addLine("Set #{ueschedoverride_actuator.name} = #{t_set_sensor.name} - #{t_offset}")
         hpwh_ctrl_program.addLine('EndIf')
       end
     end
@@ -1094,7 +1054,7 @@ class Waterheater
     fail "RelatedHVACSystem '#{water_heating_system.related_hvac_idref}' for water heating system '#{water_heating_system.id}' is not currently supported for desuperheaters."
   end
 
-  def self.add_desuperheater(model, runner, water_heating_system, tank, loc_space, loc_schedule, loop, eri_version)
+  def self.add_desuperheater(model, runner, water_heating_system, tank, loc_space, loc_schedule, loop)
     return unless water_heating_system.uses_desuperheater
 
     desuperheater_clg_coil = get_desuperheatercoil(water_heating_system, model)
@@ -1107,7 +1067,12 @@ class Waterheater
     assumed_ua = 6.0 # Btu/hr-F, tank ua calculated based on 1.0 standby_loss and 50gal nominal vol
     storage_tank_name = "#{tank.name} storage tank"
     # reduce tank setpoint to enable desuperheater setpoint at t_set
-    tank_setpoint = get_set_temp_c(water_heating_system.temperature - 5.0, HPXML::WaterHeaterTypeStorage)
+    if water_heating_system.temperature.nil?
+      fail "Detailed setpoints for water heating system '#{water_heating_system.id}' is not currently supported for desuperheaters."
+    else
+      tank_setpoint = get_t_set_c(water_heating_system.temperature - 5.0, HPXML::WaterHeaterTypeStorage)
+    end
+
     storage_tank = create_new_heater(name: storage_tank_name,
                                      act_vol: storage_vol_actual,
                                      t_set_c: tank_setpoint,
@@ -1125,10 +1090,8 @@ class Waterheater
     new_schedule = OpenStudio::Model::ScheduleConstant.new(model)
     new_schedule.setName("#{desuperheater_name} setpoint schedule")
     # Preheat tank desuperheater setpoint set to be the same as main water heater
-    dsh_setpoint = get_set_temp_c(water_heating_system.temperature, HPXML::WaterHeaterTypeStorage)
-    default_dsh_setpoint = get_set_temp_c(Waterheater.get_default_hot_water_temperature(eri_version), water_heating_system.water_heater_type)
-    default_dsh_setpoint = dsh_setpoint if !dsh_setpoint.nil?
-    new_schedule.setValue(default_dsh_setpoint)
+    dsh_setpoint = get_t_set_c(water_heating_system.temperature, HPXML::WaterHeaterTypeStorage)
+    new_schedule.setValue(dsh_setpoint)
 
     # create a desuperheater object
     desuperheater = OpenStudio::Model::CoilWaterHeatingDesuperheater.new(model, new_schedule)
@@ -1303,6 +1266,13 @@ class Waterheater
   end
 
   def self.calc_indirect_ua_with_standbyloss(act_vol, water_heating_system, a_side, solar_fraction)
+    standby_loss_units = water_heating_system.standby_loss_units
+    standby_loss_value = water_heating_system.standby_loss_value
+
+    if not [HPXML::UnitsDegFPerHour].include? standby_loss_units
+      fail "Unexpected standby loss units '#{standby_loss_units}' for indirect water heater. Should be '#{HPXML::UnitsDegFPerHour}'."
+    end
+
     # Test conditions
     cp = 0.999 # Btu/lb-F
     rho = 8.216 # lb/gal
@@ -1310,7 +1280,7 @@ class Waterheater
     t_tank_avg = 135.0 # F, Test begins at 137-138F stop at 133F
 
     # UA calculation
-    q = water_heating_system.standby_loss * cp * act_vol * rho # Btu/hr
+    q = standby_loss_value * cp * act_vol * rho # Btu/hr
     ua = q / (t_tank_avg - t_amb) # Btu/hr-F
 
     # jacket
@@ -1323,6 +1293,7 @@ class Waterheater
   def self.get_default_num_bathrooms(num_beds)
     # From BA HSP
     num_baths = num_beds / 2.0 + 0.5
+    return num_baths
   end
 
   def self.add_ec_adj(model, heater, ec_adj, loc_space, water_heating_system, combi_boiler = nil)
@@ -1430,7 +1401,8 @@ class Waterheater
     end
   end
 
-  def self.get_default_location(hpxml, iecc_zone)
+  def self.get_default_location(hpxml, climate_zone_iecc)
+    iecc_zone = (climate_zone_iecc.nil? ? nil : climate_zone_iecc.zone)
     if ['1A', '1B', '1C', '2A', '2B', '2C', '3B', '3C'].include? iecc_zone
       location_hierarchy = [HPXML::LocationGarage,
                             HPXML::LocationLivingSpace]
@@ -1584,7 +1556,6 @@ class Waterheater
     if [HPXML::WaterHeaterTypeTankless, HPXML::WaterHeaterTypeCombiTankless].include? wh_type
       ef = eta_c
     else
-      pi = Math::PI
       volume_drawn = 64.3 # gal/day
       density = 8.2938 # lb/gal
       draw_mass = volume_drawn * density # lb
@@ -1615,10 +1586,10 @@ class Waterheater
     return pump
   end
 
-  def self.create_new_schedule_manager(model, set_temp_c)
+  def self.create_new_schedule_manager(model, t_set_c)
     new_schedule = OpenStudio::Model::ScheduleConstant.new(model)
     new_schedule.setName('dhw temp')
-    new_schedule.setValue(set_temp_c)
+    new_schedule.setValue(t_set_c)
     OpenStudio::Model::SetpointManagerScheduled.new(model, new_schedule)
   end
 
@@ -1713,7 +1684,7 @@ class Waterheater
     new_heater.setName(name)
     new_heater.setTankVolume(UnitConversions.convert(act_vol, 'gal', 'm^3'))
     new_heater.setHeaterFuelType(EPlus.fuel_type(fuel)) unless fuel.nil?
-    set_wh_ambient(loc_space, loc_schedule, model, new_heater)
+    set_wh_ambient(loc_space, loc_schedule, new_heater)
 
     # FUTURE: These are always zero right now; develop smart defaults.
     new_heater.setOnCycleParasiticFuelConsumptionRate(0.0)
@@ -1752,7 +1723,7 @@ class Waterheater
     water_heater.setOffCycleLossFractiontoThermalZone(skinlossfrac)
   end
 
-  def self.set_wh_ambient(loc_space, loc_schedule, model, wh_obj)
+  def self.set_wh_ambient(loc_space, loc_schedule, wh_obj)
     if wh_obj.ambientTemperatureSchedule.is_initialized
       wh_obj.ambientTemperatureSchedule.get.remove
     end
@@ -1766,7 +1737,7 @@ class Waterheater
     end
   end
 
-  def self.configure_mixed_tank_setpoint_schedule(new_heater, schedules_file, set_temp_c, model, runner)
+  def self.configure_mixed_tank_setpoint_schedule(new_heater, schedules_file, t_set_c, model, runner)
     new_schedule = nil
     if not schedules_file.nil?
       new_schedule = schedules_file.create_schedule_file(col_name: SchedulesFile::ColumnWaterHeaterSetpoint)
@@ -1774,9 +1745,9 @@ class Waterheater
     if new_schedule.nil? # constant
       new_schedule = OpenStudio::Model::ScheduleConstant.new(model)
       new_schedule.setName('WH Setpoint Temp')
-      new_schedule.setValue(set_temp_c)
+      new_schedule.setValue(t_set_c)
     else
-      runner.registerWarning("Both '#{SchedulesFile::ColumnWaterHeaterSetpoint}' schedule file and setpoint temperature provided; the latter will be ignored.") if !set_temp_c.nil?
+      runner.registerWarning("Both '#{SchedulesFile::ColumnWaterHeaterSetpoint}' schedule file and setpoint temperature provided; the latter will be ignored.") if !t_set_c.nil?
     end
     if new_heater.setpointTemperatureSchedule.is_initialized
       new_heater.setpointTemperatureSchedule.get.remove
@@ -1784,7 +1755,7 @@ class Waterheater
     new_heater.setSetpointTemperatureSchedule(new_schedule)
   end
 
-  def self.configure_stratified_tank_setpoint_schedules(new_heater, schedules_file, set_temp_c, model, runner)
+  def self.configure_stratified_tank_setpoint_schedules(new_heater, schedules_file, t_set_c, model, runner)
     new_schedule = nil
     if not schedules_file.nil?
       new_schedule = schedules_file.create_schedule_file(col_name: SchedulesFile::ColumnWaterHeaterSetpoint)
@@ -1792,9 +1763,9 @@ class Waterheater
     if new_schedule.nil? # constant
       new_schedule = OpenStudio::Model::ScheduleConstant.new(model)
       new_schedule.setName('WH Setpoint Temp')
-      new_schedule.setValue(set_temp_c)
+      new_schedule.setValue(t_set_c)
     else
-      runner.registerWarning("Both '#{SchedulesFile::ColumnWaterHeaterSetpoint}' schedule file and setpoint temperature provided; the latter will be ignored.") if !set_temp_c.nil?
+      runner.registerWarning("Both '#{SchedulesFile::ColumnWaterHeaterSetpoint}' schedule file and setpoint temperature provided; the latter will be ignored.") if !t_set_c.nil?
     end
     new_heater.heater1SetpointTemperatureSchedule.remove
     new_heater.heater2SetpointTemperatureSchedule.remove
@@ -1802,17 +1773,22 @@ class Waterheater
     new_heater.setHeater2SetpointTemperatureSchedule(new_schedule)
   end
 
-  def self.get_set_temp_c(t_set, wh_type)
+  def self.get_t_set_c(t_set, wh_type)
     return if t_set.nil?
 
     return UnitConversions.convert(t_set, 'F', 'C') + deadband(wh_type) / 2.0 # Half the deadband to account for E+ deadband
   end
 
-  def self.create_new_loop(model, name, t_set)
+  def self.create_new_loop(model, name, t_set_c, eri_version)
     # Create a new plant loop for the water heater
+
+    if t_set_c.nil?
+      t_set_c = UnitConversions.convert(get_default_hot_water_temperature(eri_version), 'F', 'C')
+    end
+
     loop = OpenStudio::Model::PlantLoop.new(model)
     loop.setName(name)
-    loop.sizingPlant.setDesignLoopExitTemperature(t_set)
+    loop.sizingPlant.setDesignLoopExitTemperature(t_set_c)
     loop.sizingPlant.setLoopDesignTemperatureDifference(UnitConversions.convert(10.0, 'R', 'K'))
     loop.setPlantLoopVolume(0.003) # ~1 gal
     loop.setMaximumLoopFlowRate(0.01) # This size represents the physical limitations to flow due to losses in the piping system. We assume that the pipes are always adequately sized.
@@ -1823,6 +1799,12 @@ class Waterheater
     loop.addSupplyBranchForComponent(bypass_pipe)
     out_pipe.addToNode(loop.supplyOutletNode)
 
+    new_pump = create_new_pump(model)
+    new_pump.addToNode(loop.supplyInletNode)
+
+    new_manager = create_new_schedule_manager(model, t_set_c)
+    new_manager.addToNode(loop.supplyOutletNode)
+
     return loop
   end
 
@@ -1833,30 +1815,6 @@ class Waterheater
     return solar_fraction.to_f
   end
 
-  def self.get_default_water_heater_efficiency_by_year_installed(year, fuel_type)
-    fuel_primary_id = { EPlus::FuelTypeElectricity => 'electric',
-                        EPlus::FuelTypeNaturalGas => 'natural_gas',
-                        EPlus::FuelTypeOil => 'fuel_oil',
-                        EPlus::FuelTypeCoal => 'fuel_oil', # assumption
-                        EPlus::FuelTypeWoodCord => 'fuel_oil', # assumption
-                        EPlus::FuelTypeWoodPellets => 'fuel_oil', # assumption
-                        EPlus::FuelTypePropane => 'lpg' }[EPlus.fuel_type(fuel_type)]
-
-    value = nil
-    lookup_year = 0
-    CSV.foreach(File.join(File.dirname(__FILE__), 'data', 'water_heater_efficiency.csv'), headers: true) do |row|
-      next unless row['fuel_primary_id'] == fuel_primary_id
-
-      row_year = Integer(row['year'])
-      if (row_year - year).abs <= (lookup_year - year).abs
-        lookup_year = row_year
-        value = Float(row['value'])
-      end
-    end
-
-    return value
-  end
-
   def self.get_usage_bin_from_first_hour_rating(fhr)
     if fhr < 18.0
       return HPXML::WaterHeaterUsageBinVerySmall

data/example_files/resources/hpxml-measures/HPXMLtoOpenStudio/resources/weather.rb

@@ -32,22 +32,15 @@ class WeatherProcess
       return
     end
 
-    @model = model
-    @runner = runner
+    epw_path = get_epw_path(model)
 
-    @epw_path = WeatherProcess.get_epw_path(@model)
-
-    if not File.exist?(@epw_path)
+    if not File.exist?(epw_path)
       fail "Cannot find weather file at #{epw_path}."
     end
 
-    @epw_file = OpenStudio::EpwFile.new(@epw_path, true)
-
-    process_epw
-  end
+    epw_file = OpenStudio::EpwFile.new(epw_path, true)
 
-  def epw_path
-    return @epw_path
+    process_epw(runner, epw_file)
   end
 
   def dump_to_csv(csv_path)
@@ -76,6 +69,7 @@ class WeatherProcess
   end
 
   def load_from_csv(csv_path)
+    require 'csv'
     csv_data = CSV.read(csv_path, headers: false)
 
     def to_datatype(data, dataclass)
@@ -106,7 +100,7 @@ class WeatherProcess
 
   private
 
-  def self.get_epw_path(model)
+  def get_epw_path(model)
     if model.weatherFile.is_initialized
 
       wf = model.weatherFile.get
@@ -125,23 +119,23 @@ class WeatherProcess
     fail 'Model has not been assigned a weather file.'
   end
 
-  def process_epw
+  def process_epw(runner, epw_file)
     # Header info:
-    @header.City = @epw_file.city
-    @header.State = @epw_file.stateProvinceRegion
-    @header.Country = @epw_file.country
-    @header.DataSource = @epw_file.dataSource
-    @header.Station = @epw_file.wmoNumber
-    @header.Latitude = @epw_file.latitude
-    @header.Longitude = @epw_file.longitude
-    @header.Timezone = @epw_file.timeZone
-    @header.Altitude = UnitConversions.convert(@epw_file.elevation, 'm', 'ft')
+    @header.City = epw_file.city
+    @header.State = epw_file.stateProvinceRegion
+    @header.Country = epw_file.country
+    @header.DataSource = epw_file.dataSource
+    @header.Station = epw_file.wmoNumber
+    @header.Latitude = epw_file.latitude
+    @header.Longitude = epw_file.longitude
+    @header.Timezone = epw_file.timeZone
+    @header.Altitude = UnitConversions.convert(epw_file.elevation, 'm', 'ft')
     @header.LocalPressure = Math::exp(-0.0000368 * @header.Altitude) # atm
-    @header.RecordsPerHour = @epw_file.recordsPerHour
+    @header.RecordsPerHour = epw_file.recordsPerHour
 
-    epw_file_data = @epw_file.data
+    epw_file_data = epw_file.data
 
-    epwHasDesignData = get_design_info_from_epw
+    epwHasDesignData = get_design_info_from_epw(epw_file)
 
     # Timeseries data:
     rowdata = []
@@ -208,14 +202,14 @@ class WeatherProcess
 
     calc_annual_drybulbs(rowdata)
     calc_monthly_drybulbs(rowdata)
-    calc_heat_cool_degree_days(rowdata, dailydbs)
+    calc_heat_cool_degree_days(dailydbs)
     calc_avg_monthly_highs_lows(dailyhighdbs, dailylowdbs)
     calc_avg_windspeed(rowdata)
     calc_ground_temperatures
     @data.WSF = calc_ashrae_622_wsf(rowdata)
 
     if not epwHasDesignData
-      @runner.registerWarning('No design condition info found; calculating design conditions from EPW weather data.')
+      runner.registerWarning('No design condition info found; calculating design conditions from EPW weather data.')
       calc_design_info(rowdata)
       @design.DailyTemperatureRange = @data.MonthlyAvgDailyHighDrybulbs[7] - @data.MonthlyAvgDailyLowDrybulbs[7]
     end
@@ -248,7 +242,7 @@ class WeatherProcess
   def calc_monthly_drybulbs(hd)
     # Calculates and stores monthly average drybulbs
     @data.MonthlyAvgDrybulbs = []
-    (1...13).to_a.each do |month|
+    for month in 1..12
       y = []
       hd.each do |x|
         if x['month'] == month
@@ -271,7 +265,7 @@ class WeatherProcess
     @data.AnnualAvgWindspeed = avgws
   end
 
-  def calc_heat_cool_degree_days(hd, dailydbs)
+  def calc_heat_cool_degree_days(dailydbs)
     # Calculates and stores heating/cooling degree days
     @data.HDD65F = calc_degree_days(dailydbs, 65, true)
     @data.HDD50F = calc_degree_days(dailydbs, 50, true)
@@ -404,8 +398,8 @@ class WeatherProcess
     return wsf.round(2)
   end
 
-  def get_design_info_from_epw
-    epw_design_conditions = @epw_file.designConditions
+  def get_design_info_from_epw(epw_file)
+    epw_design_conditions = epw_file.designConditions
     epwHasDesignData = false
     if epw_design_conditions.length > 0
       epwHasDesignData = true
@@ -504,7 +498,7 @@ class WeatherProcess
     bo = (data.MonthlyAvgDrybulbs.max - data.MonthlyAvgDrybulbs.min) * 0.5
 
     @data.GroundMonthlyTemps = []
-    (0...12).to_a.each do |i|
+    for i in 0..11
       theta = amon[i] * 24.0
       @data.GroundMonthlyTemps << UnitConversions.convert(data.AnnualAvgDrybulb - bo * Math::cos(2.0 * Math::PI / p * theta - po - phi) * gm + 460.0, 'R', 'F')
     end