unpoly-rails 0.62.1 → 2.0.0.pre.rc6

data/lib/assets/javascripts/unpoly/log.coffee

@@ -1,248 +0,0 @@
-###**
-Logging
-=======
-
-Unpoly can print debugging information to the developer console, e.g.:
-
-- Which [events](/up.event) are called
-- When we're [making requests to the network](/up.proxy)
-- Which [compilers](/up.syntax) are applied to which elements
-
-You can activate logging by calling [`up.log.enable()`](/up.log.enable).
-The output can be configured using the [`up.log.config`](/up.log.config) property.
-
-@module up.log
-###
-up.log = do ->
-
-  u = up.util
-  b = up.browser
-
-  sessionStore = new up.store.Session('up.log')
-
-  ###**
-  Configures the logging output on the developer console.
-
-  @property up.log.config
-  @param {boolean} [options.enabled=false]
-    Whether Unpoly will print debugging information to the developer console.
-
-    Debugging information includes which elements are being [compiled](/up.syntax)
-    and which [events](/up.event) are being emitted.
-    Note that errors will always be printed, regardless of this setting.
-  @param {boolean} [options.collapse=false]
-    Whether debugging information is printed as a collapsed tree.
-
-    Set this to `true` if you are overwhelmed by the debugging information Unpoly
-    prints to the developer console.
-  @param {string} [options.prefix='[UP] ']
-    A string to prepend to Unpoly's logging messages so you can distinguish it from your own messages.
-  @stable
-  ###
-  config = new up.Config
-    prefix: '[UP] '
-    enabled: sessionStore.get('enabled')
-    collapse: false
-
-  reset = ->
-    config.reset()
-
-  prefix = (message) ->
-    "#{config.prefix}#{message}"
-
-  ###**
-  A cross-browser way to interact with `console.log`, `console.error`, etc.
-
-  This function falls back to `console.log` if the output stream is not implemented.
-  It also prints substitution strings (e.g. `console.log("From %o to %o", "a", "b")`)
-  as a single string if the browser console does not support substitution strings.
-
-  \#\#\# Example
-
-      up.browser.puts('log', 'Hi world')
-      up.browser.puts('error', 'There was an error in %o', obj)
-
-  @function up.browser.puts
-  @internal
-  ###
-  callConsole = (stream, args...) ->
-    console[stream](args...)
-
-  CONSOLE_PLACEHOLDERS = /\%[odisf]/g
-
-  stringifyArg = (arg) ->
-    maxLength = 200
-    closer = ''
-
-    if u.isString(arg)
-      string = arg.replace(/[\n\r\t ]+/g, ' ')
-      string = string.replace(/^[\n\r\t ]+/, '')
-      string = string.replace(/[\n\r\t ]$/, '')
-      string = "\"#{string}\""
-      closer = '"'
-    else if u.isUndefined(arg)
-      # JSON.stringify(undefined) is actually undefined
-      string = 'undefined'
-    else if u.isNumber(arg) || u.isFunction(arg)
-      string = arg.toString()
-    else if u.isArray(arg)
-      string = "[#{u.map(arg, stringifyArg).join(', ')}]"
-      closer = ']'
-    else if u.isJQuery(arg)
-      string = "$(#{u.map(arg, stringifyArg).join(', ')})"
-      closer = ')'
-    else if u.isElement(arg)
-      string = "<#{arg.tagName.toLowerCase()}"
-      for attr in ['id', 'name', 'class']
-        if value = arg.getAttribute(attr)
-          string += " #{attr}=\"#{value}\""
-      string += ">"
-      closer = '>'
-    else # object
-      string = JSON.stringify(arg)
-    if string.length > maxLength
-      string = "#{string.substr(0, maxLength)} …"
-      string += closer
-    string
-
-  ###**
-  See https://developer.mozilla.org/en-US/docs/Web/API/Console#Using_string_substitutions
-
-  @function up.browser.sprintf
-  @internal
-  ###
-  sprintf = (message, args...) ->
-    sprintfWithFormattedArgs(u.identity, message, args...)
-
-  ###**
-  @function up.browser.sprintfWithFormattedArgs
-  @internal
-  ###
-  sprintfWithFormattedArgs = (formatter, message, args...) ->
-    return '' if u.isBlank(message)
-
-    i = 0
-    message.replace CONSOLE_PLACEHOLDERS, ->
-      arg = args[i]
-      arg = formatter(stringifyArg(arg))
-      i += 1
-      arg
-
-  ###**
-  Prints a debugging message to the browser console.
-
-  @function up.log.debug
-  @param {string} message
-  @param {Array} ...args
-  @internal
-  ###
-  debug = (message, args...) ->
-    if config.enabled && message
-      console.debug(prefix(message), args...)
-
-  ###**
-  Prints a logging message to the browser console.
-
-  @function up.puts
-  @param {string} message
-  @param {Array} ...args
-  @internal
-  ###
-  puts = (message, args...) ->
-    if config.enabled && message
-      console.log(prefix(message), args...)
-
-  ###**
-  @function up.warn
-  @internal
-  ###
-  warn = (message, args...) ->
-    if message
-      console.warn(prefix(message), args...)
-
-  ###**
-  - Makes sure the group always closes
-  - Does not make a group if the message is nil
-
-  @function up.log.group
-  @internal
-  ###
-  group = (message, args...) ->
-    block = args.pop() # Coffeescript copies the arguments array
-    if config.enabled && message
-      fn = if config.collapse then 'groupCollapsed' else 'group'
-      console[fn](prefix(message), args...)
-      try
-        block()
-      finally
-        console.groupEnd() if message
-    else
-      block()
-
-  ###**
-  @function up.log.error
-  @internal
-  ###
-  error = (message, args...) ->
-    if message
-      console.error(prefix(message), args...)
-
-  printBanner = ->
-    # The ASCII art looks broken in code since we need to escape backslashes
-    banner = " __ _____  ___  ___  / /_ __\n" +
-             "/ // / _ \\/ _ \\/ _ \\/ / // /  #{up.version}\n" +
-             "\\___/_//_/ .__/\\___/_/\\_. / \n" +
-             "        / /            / /\n" +
-             "\n"
-    if config.enabled
-      banner += "Call `up.log.disable()` to disable logging for this session."
-    else
-      banner += "Call `up.log.enable()` to enable logging for this session."
-    console.log(banner)
-
-  up.on 'up:framework:booted', printBanner
-  up.on 'up:framework:reset', reset
-
-  setEnabled = (value) ->
-    sessionStore.set('enabled', value)
-    config.enabled = value
-
-  ###**
-  Makes future Unpoly events print vast amounts of debugging information to the developer console.
-
-  Debugging information includes which elements are being [compiled](/up.syntax)
-  and which [events](/up.event) are being emitted.
-
-  @function up.log.enable
-  @stable
-  ###
-  enable = ->
-    setEnabled(true)
-
-  ###**
-  Prevents future Unpoly events from printing vast amounts of debugging information to the developer console.
-
-  Errors will still be printed, even with logging disabled.
-
-  @function up.log.disable
-  @stable
-  ###
-  disable = ->
-    setEnabled(false)
-
-  puts: puts
-  sprintf: sprintf
-  sprintfWithFormattedArgs: sprintfWithFormattedArgs
-  puts: puts
-  debug: debug
-  error: error
-  warn: warn
-  group: group
-  config: config
-  enable: enable
-  disable: disable
-  isEnabled: -> config.enabled
-
-up.puts = up.log.puts
-up.warn = up.log.warn
-

data/lib/assets/javascripts/unpoly/modal.coffee.erb

@@ -1,827 +0,0 @@
-###**
-Modal dialogs
-=============
-
-Instead of [linking to a page fragment](/up.link), you can choose to show a fragment
-in a modal dialog. The existing page will remain open in the background.
-
-To open a modal, add an [`[up-modal]`](/a-up-modal) attribute to a link:
-
-    <a href="/blogs" up-modal=".blog-list">Switch blog</a>
-
-When this link is clicked, Unpoly will request the path `/blogs` and extract
-an element matching the selector `.blog-list` from the response. The matching element
-will then be placed in a modal dialog.
-
-
-\#\#\# Closing behavior
-
-By default the dialog automatically closes
-*when a link inside a modal changes a fragment behind the modal*.
-This is useful to have the dialog interact with the page that
-opened it, e.g. by updating parts of a larger form.
-
-To disable this behavior, give the opening link an [`up-sticky`](/a-up-modal#up-sticky) attribute:
-
-
-\#\#\# Customizing the dialog design
-
-Dialogs have a minimal default design:
-
-- Contents are displayed in a white box with a subtle box shadow
-- The box will grow to fit the dialog contents, but never grow larger than the screen
-- The box is placed over a semi-transparent backdrop to dim the rest of the page
-- There is a button to close the dialog in the top-right corner
-
-The easiest way to change how the dialog looks is to override the
-[default CSS styles](https://github.com/unpoly/unpoly/blob/master/lib/assets/stylesheets/unpoly/modal.sass).
-
-By default the dialog uses the following DOM structure:
-
-    <div class="up-modal">
-      <div class="up-modal-backdrop">
-      <div class="up-modal-viewport">
-        <div class="up-modal-dialog">
-          <div class="up-modal-content">
-            <!-- the matching element will be placed here -->
-          </div>
-          <div class="up-modal-close" up-close>X</div>
-        </div>
-      </div>
-    </div>
-
-You can change this structure by setting [`up.modal.config.template`](/up.modal.config#config.template) to a new template string
-or function.
-
-
-@module up.modal
-###
-up.modal = do ->
-
-  u = up.util
-  e = up.element
-
-  ###**
-  Sets default options for future modals.
-
-  @property up.modal.config
-  @param {string} [config.history=true]
-    Whether opening a modal will add a browser history entry.
-  @param {number} [config.width]
-    The width of the dialog as a CSS value like `'400px'` or `'50%'`.
-
-    Defaults to `undefined`, meaning that the dialog will grow to fit its contents
-    until it reaches `config.maxWidth`. Leaving this as `undefined` will
-    also allow you to control the width using CSS on `.up-modal-dialog´.
-  @param {number} [config.maxWidth]
-    The width of the dialog as a CSS value like `'400px'` or `50%`.
-    You can set this to `undefined` to make the dialog fit its contents.
-    Be aware however, that e.g. Bootstrap stretches input elements
-    to `width: 100%`, meaning the dialog will also stretch to the full
-    width of the screen.
-  @param {number} [config.height='auto']
-    The height of the dialog in pixels.
-    Defaults to `undefined`, meaning that the dialog will grow to fit its contents.
-  @param {string|Function(config): string} [config.template]
-    A string containing the HTML structure of the modal.
-    You can supply an alternative template string, but make sure that it
-    defines tag with the classes `up-modal`, `up-modal-dialog` and  `up-modal-content`.
-
-    You can also supply a function that returns a HTML string.
-    The function will be called with the modal options (merged from these defaults
-    and any per-open overrides) whenever a modal opens.
-  @param {string} [config.closeLabel='×']
-    The label of the button that closes the dialog.
-  @param {boolean} [config.closable=true]
-    When `true`, the modal will render a close icon and close when the user
-    clicks on the backdrop or presses Escape.
-
-    When `false`, you need to either supply an element with `[up-close]` or
-    close the modal manually with `up.modal.close()`.
-  @param {string} [config.openAnimation='fade-in']
-    The animation used to open the viewport around the dialog.
-  @param {string} [config.closeAnimation='fade-out']
-    The animation used to close the viewport the dialog.
-  @param {string} [config.backdropOpenAnimation='fade-in']
-    The animation used to open the backdrop that dims the page below the dialog.
-  @param {string} [config.backdropCloseAnimation='fade-out']
-    The animation used to close the backdrop that dims the page below the dialog.
-  @param {number} [config.openDuration]
-    The duration of the open animation (in milliseconds).
-  @param {number} [config.closeDuration]
-    The duration of the close animation (in milliseconds).
-  @param {string} [config.openEasing]
-    The timing function controlling the acceleration of the opening animation.
-  @param {string} [config.closeEasing]
-    The timing function controlling the acceleration of the closing animation.
-  @param {boolean} [options.sticky=false]
-    If set to `true`, the modal remains
-    open even it changes the page in the background.
-  @param {string} [options.flavor='default']
-    The default [flavor](/up.modal.flavors).
-  @stable
-  ###
-  config = new up.Config
-    maxWidth: null
-    width: null
-    height: null
-    history: true
-    openAnimation: 'fade-in'
-    closeAnimation: 'fade-out'
-    openDuration: null
-    closeDuration: null
-    openEasing: null
-    closeEasing: null
-    backdropOpenAnimation: 'fade-in'
-    backdropCloseAnimation: 'fade-out'
-    closeLabel: '×'
-    closable: true
-    sticky: false
-    flavor: 'default'
-    position: null
-    template: (options) ->
-      """
-      <div class="up-modal">
-        <div class="up-modal-backdrop"></div>
-        <div class="up-modal-viewport">
-          <div class="up-modal-dialog">
-            <div class="up-modal-content"></div>
-            <div class="up-modal-close" up-close>#{options.closeLabel}</div>
-          </div>
-        </div>
-      </div>
-      """
-
-  ###**
-  Define modal variants with their own default configuration, CSS or HTML template.
-
-  \#\#\# Example
-
-  Unpoly's [`[up-drawer]`](/a-up-drawer) is implemented as a modal flavor:
-
-      up.modal.flavors.drawer = {
-        openAnimation: 'move-from-right',
-        closeAnimation: 'move-to-right'
-      }
-
-  Modals with that flavor will have a container with an `up-flavor` attribute:
-
-      <div class='up-modal' up-flavor='drawer'>
-        ...
-      </div>
-
-  We can target the `up-flavor` attribute to override the default dialog styles:
-
-      .up-modal[up-flavor='drawer'] {
-
-        .up-modal-dialog {
-          margin: 0;         // Remove margin so drawer starts at the screen edge
-          max-width: 350px;  // Set drawer size
-        }
-
-        .up-modal-content {
-          min-height: 100vh; // Stretch background to full window height
-        }
-      }
-
-  @property up.modal.flavors
-  @param {Object} flavors
-    An object where the keys are flavor names (e.g. `'drawer') and
-    the values are the respective default configurations.
-  @experimental
-  ###
-  flavors = new up.Config
-    default: {}
-
-  ###**
-  Returns the source URL for the fragment displayed in the current modal overlay,
-  or `undefined` if no modal is currently open.
-
-  @function up.modal.url
-  @return {string}
-    the source URL
-  @stable
-  ###
-
-  ###**
-  Returns the URL of the page behind the modal overlay.
-
-  @function up.modal.coveredUrl
-  @return {string}
-  @experimental
-  ###
-  
-  state = new up.Config
-    phase: 'closed'      # can be 'opening', 'opened', 'closing' and 'closed'
-    anchorElement: null  # the element to which the tooltip is anchored
-    modalElement: null   # the modal container
-    sticky: null
-    closable: null
-    flavor: null
-    url: null
-    coveredUrl: null
-    coveredTitle: null
-    position: null
-
-  bodyShifter = new up.BodyShifter()
-
-  chain = new up.DivertibleChain()
-
-  reset = ->
-    e.remove(state.modalElement) if state.modalElement
-    bodyShifter.unshift()
-    state.reset()
-    chain.reset()
-    config.reset()
-    flavors.reset()
-
-  templateHtml = ->
-    template = flavorDefault('template')
-    u.evalOption(template, closeLabel: flavorDefault('closeLabel'))
-
-  discardHistory = ->
-    state.coveredTitle = null
-    state.coveredUrl = null
-
-  part = (name) ->
-    selector = ".up-modal-#{name}"
-    state.modalElement.querySelector(selector)
-
-  createHiddenFrame = (target, options) ->
-    html = templateHtml()
-    state.modalElement = modalElement = e.createFromHtml(html)
-    modalElement.setAttribute('aria-modal', 'true') # tell modern screen readers to make all other elements inert
-    modalElement.setAttribute('up-flavor', state.flavor)
-    modalElement.setAttribute('up-position', state.position) if u.isPresent(state.position)
-
-    dialogStyles = u.only(options, 'width', 'maxWidth', 'height')
-    e.setStyle(part('dialog'), dialogStyles)
-
-    unless state.closable
-      closeElement = part('close')
-      e.remove(closeElement)
-
-    contentElement = part('content')
-    # Create an empty element that will match the
-    # selector that is being replaced.
-    up.fragment.createPlaceholder(target, contentElement)
-    e.hide(modalElement)
-    document.body.appendChild(modalElement)
-
-  unveilFrame = ->
-    e.show(state.modalElement)
-
-  ###**
-  Returns whether a modal is currently open.
-
-  This also returns `true` if the modal is in an opening or closing animation.
-
-  @function up.modal.isOpen
-  @return {boolean}
-  @stable
-  ###
-  isOpen = ->
-    state.phase == 'opened' || state.phase == 'opening'
-
-  ###**
-  Opens the given link's destination in a modal overlay:
-
-      var link = document.querySelector('a')
-      up.modal.follow(link)
-
-  Any option attributes for [`a[up-modal]`](/a-up-modal) will be honored.
-
-  Emits events [`up:modal:open`](/up:modal:open) and [`up:modal:opened`](/up:modal:opened).
-
-  @function up.modal.follow
-  @param {Element|jQuery|string} linkOrSelector
-    The link to follow.
-  @param {string} [options.target]
-    The selector to extract from the response and open in a modal dialog.
-  @param {number} [options.width]
-    The width of the dialog in pixels.
-    By [default](/up.modal.config) the dialog will grow to fit its contents.
-  @param {number} [options.height]
-    The width of the dialog in pixels.
-    By [default](/up.modal.config) the dialog will grow to fit its contents.
-  @param {boolean} [options.sticky=false]
-    If set to `true`, the modal remains
-    open even it changes the page in the background.
-  @param {boolean} [config.closable=true]
-    When `true`, the modal will render a close icon and close when the user
-    clicks on the backdrop or presses Escape.
-
-    When `false`, you need to either supply an element with `[up-close]` or
-    close the modal manually with `up.modal.close()`.
-  @param {string} [options.confirm]
-    A message that will be displayed in a cancelable confirmation dialog
-    before the modal is being opened.
-  @param {string} [options.method="GET"]
-    Override the request method.
-  @param {boolean} [options.history=true]
-    Whether to add a browser history entry for the modal's source URL.
-  @param {string} [options.animation]
-    The animation to use when opening the modal.
-  @param {number} [options.duration]
-    The duration of the animation. See [`up.animate()`](/up.animate).
-  @param {number} [options.delay]
-    The delay before the animation starts. See [`up.animate()`](/up.animate).
-  @param {string} [options.easing]
-    The timing function that controls the animation's acceleration. [`up.animate()`](/up.animate).
-  @return {Promise}
-    A promise that will be fulfilled when the modal has been loaded and
-    the opening animation has completed.
-  @stable
-  ###
-  followAsap = (linkOrSelector, options) ->
-    options = u.options(options)
-    options.link = e.get(linkOrSelector)
-    openAsap(options)
-
-  preloadNow = (link, options) ->
-    options = u.options(options)
-    options.link = link
-    options.preload = true
-    # Use openNow() and not openAsap() so (1) we don't close a currently open modal
-    # and (2) our pending AJAX request does not prevent other modals from opening
-    openNow(options)
-
-  ###**
-  Opens a modal for the given URL.
-
-  \#\#\# Example
-
-      up.modal.visit('/foo', { target: '.list' })
-
-  This will request `/foo`, extract the `.list` selector from the response
-  and open the selected container in a modal dialog.
-
-  Emits events [`up:modal:open`](/up:modal:open) and [`up:modal:opened`](/up:modal:opened).
-
-  @function up.modal.visit
-  @param {string} url
-    The URL to load.
-  @param {string} options.target
-    The CSS selector to extract from the response.
-    The extracted content will be placed into the dialog window.
-  @param {Object} options
-    See options for [`up.modal.follow()`](/up.modal.follow).
-  @return {Promise}
-    A promise that will be fulfilled when the modal has been loaded and the opening
-    animation has completed.
-  @stable
-  ###
-  visitAsap = (url, options) ->
-    options = u.options(options)
-    options.url = url
-    openAsap(options)
-
-  ###**
-  [Extracts](/up.extract) the given CSS selector from the given HTML string and
-  opens the results in a modal.
-
-  \#\#\# Example
-
-      var html = 'before <div class="content">inner</div> after';
-      up.modal.extract('.content', html)
-
-  The would open a modal with the following contents:
-
-      <div class="content">inner</div>
-
-  Emits events [`up:modal:open`](/up:modal:open) and [`up:modal:opened`](/up:modal:opened).
-
-  @function up.modal.extract
-  @param {string} selector
-    The CSS selector to extract from the HTML.
-  @param {string} html
-    The HTML containing the modal content.
-  @param {Object} options
-    See options for [`up.modal.follow()`](/up.modal.follow).
-  @return {Promise}
-    A promise that will be fulfilled when the modal has been opened and the opening
-    animation has completed.
-  @stable
-  ###
-  extractAsap = (selector, html, options) ->
-    options = u.options(options)
-    options.html = html
-    options.history ?= false
-    options.target = selector
-    openAsap(options)
-
-  openAsap = (options) ->
-    chain.asap closeNow, (-> openNow(options))
-
-  openNow = (options) ->
-    options = u.options(options)
-    link = u.pluckKey(options, 'link') || e.none()
-    url = u.pluckKey(options, 'url') ? link.getAttribute('up-href') ? link.getAttribute('href')
-    html = u.pluckKey(options, 'html')
-    target = u.pluckKey(options, 'target') ? link.getAttribute('up-modal')
-    validateTarget(target)
-    options.flavor ?= link.getAttribute('up-flavor') ? config.flavor
-    options.position ?= link.getAttribute('up-position') ? flavorDefault('position', options.flavor)
-    options.position = u.evalOption(options.position, { link })
-    options.width ?= link.getAttribute('up-width') ? flavorDefault('width', options.flavor)
-    options.maxWidth ?= link.getAttribute('up-max-width') ? flavorDefault('maxWidth', options.flavor)
-    options.height ?= link.getAttribute('up-height') ? flavorDefault('height')
-    options.animation ?= link.getAttribute('up-animation') ? flavorDefault('openAnimation', options.flavor)
-    options.animation = u.evalOption(options.animation, position: options.position)
-    options.backdropAnimation ?= link.getAttribute('up-backdrop-animation') ? flavorDefault('backdropOpenAnimation', options.flavor)
-    options.backdropAnimation = u.evalOption(options.backdropAnimation, position: options.position)
-    options.sticky ?= e.booleanAttr(link, 'up-sticky') ? flavorDefault('sticky', options.flavor)
-    options.closable ?= e.booleanAttr(link, 'up-closable') ? flavorDefault('closable', options.flavor)
-    options.confirm ?= link.getAttribute('up-confirm')
-    options.method = up.link.followMethod(link, options)
-    options.layer = 'modal'
-    options.failTarget ?= link.getAttribute('up-fail-target')
-    options.failLayer ?= link.getAttribute('up-fail-layer') ? 'auto'
-    options.cache ?= e.booleanAttr(link, 'up-cache')
-
-    animateOptions = up.motion.animateOptions(options, link, duration: flavorDefault('openDuration', options.flavor), easing: flavorDefault('openEasing', options.flavor))
-
-    # Although we usually fall back to full page loads if a browser doesn't support pushState,
-    # in the case of modals we assume that the developer would rather see a dialog
-    # without an URL update.
-    options.history ?= e.booleanOrStringAttr(link, 'up-history') ? flavorDefault('history', options.flavor)
-    options.history = false unless up.browser.canPushState()
-
-    # This will prevent up.replace() from looking for fallbacks, since
-    # it knows the target will always exist.
-    options.provideTarget = -> createHiddenFrame(target, options)
-
-    if options.preload
-      return up.replace(target, url, options)
-
-    up.browser.whenConfirmed(options).then ->
-      up.event.whenEmitted('up:modal:open', url: url, log: 'Opening modal').then ->
-        state.phase = 'opening'
-        state.flavor = options.flavor
-        state.sticky = options.sticky
-        state.closable = options.closable
-        state.position = options.position
-        if options.history
-          state.coveredUrl = up.browser.url()
-          state.coveredTitle = document.title
-        extractOptions = u.merge(options, animation: false)
-        if html
-          promise = up.extract(target, html, extractOptions)
-        else
-          promise = up.replace(target, url, extractOptions)
-        promise = promise.then ->
-          bodyShifter.shift()
-          unveilFrame()
-          animate(options.animation, options.backdropAnimation, animateOptions)
-        promise = promise.then ->
-          state.phase = 'opened'
-          up.emit('up:modal:opened', log: 'Modal opened')
-        promise
-
-  validateTarget = (target) ->
-    if u.isBlank(target)
-      up.fail('Cannot open a modal without a target selector')
-    else if target == 'body'
-      up.fail('Cannot open the <body> in a modal')
-
-  ###**
-  This event is [emitted](/up.emit) when a modal dialog is starting to open.
-
-  @event up:modal:open
-  @param event.preventDefault()
-    Event listeners may call this method to prevent the modal from opening.
-  @stable
-  ###
-
-  ###**
-  This event is [emitted](/up.emit) when a modal dialog has finished opening.
-
-  @event up:modal:opened
-  @stable
-  ###
-
-  ###**
-  Closes a currently opened modal overlay.
-
-  Does nothing if no modal is currently open.
-
-  Emits events [`up:modal:close`](/up:modal:close) and [`up:modal:closed`](/up:modal:closed).
-
-  @function up.modal.close
-  @param {Object} options
-    See options for [`up.animate()`](/up.animate)
-  @return {Promise}
-    A promise that will be fulfilled once the modal's close
-    animation has finished.
-  @stable
-  ###
-  closeAsap = (options) ->
-    chain.asap -> closeNow(options)
-
-  closeNow = (options) ->
-    options = u.options(options)
-
-    unless isOpen()
-      return Promise.resolve()
-
-    viewportCloseAnimation = options.animation ? flavorDefault('closeAnimation')
-    viewportCloseAnimation = u.evalOption(viewportCloseAnimation, position: state.position)
-    backdropCloseAnimation = options.backdropAnimation ? flavorDefault('backdropCloseAnimation')
-    backdropCloseAnimation = u.evalOption(backdropCloseAnimation, position: state.position)
-    animateOptions = up.motion.animateOptions(options, duration: flavorDefault('closeDuration'), easing: flavorDefault('closeEasing'))
-
-    destroyOptions = u.options(
-      u.except(options, 'animation', 'duration', 'easing', 'delay'),
-      history: state.coveredUrl,
-      title: state.coveredTitle
-    )
-
-    up.event.whenEmitted(state.modalElement, 'up:modal:close', log: 'Closing modal').then ->
-      state.phase = 'closing'
-      # the current URL must be deleted *before* calling up.destroy,
-      # since up.feedback listens to up:fragment:destroyed and then
-      # re-assigns .up-current classes.
-      state.url = null
-      state.coveredUrl = null
-      state.coveredTitle = null
-
-      promise = animate(viewportCloseAnimation, backdropCloseAnimation, animateOptions)
-
-      promise = promise.then ->
-        up.destroy(state.modalElement, destroyOptions)
-
-      promise = promise.then ->
-        bodyShifter.unshift()
-        state.phase = 'closed'
-        state.modalElement = null
-        state.flavor = null
-        state.sticky = null
-        state.closable = null
-        state.position = null
-        up.emit('up:modal:closed', log: 'Modal closed')
-
-      promise
-
-  markAsAnimating = (isAnimating = true) ->
-    e.toggleClass(state.modalElement, 'up-modal-animating', isAnimating)
-
-  animate = (viewportAnimation, backdropAnimation, animateOptions) ->
-    # If we're not animating the dialog, don't animate the backdrop either
-    if up.motion.isNone(viewportAnimation)
-      Promise.resolve()
-    else
-      markAsAnimating()
-
-      promise = Promise.all([
-        up.animate(part('viewport'), viewportAnimation, animateOptions),
-        up.animate(part('backdrop'), backdropAnimation, animateOptions)
-      ])
-      promise = promise.then -> markAsAnimating(false)
-      promise
-
-  ###**
-  This event is [emitted](/up.emit) when a modal dialog
-  is starting to [close](/up.modal.close).
-
-  @event up:modal:close
-  @param event.preventDefault()
-    Event listeners may call this method to prevent the modal from closing.
-  @stable
-  ###
-
-  ###**
-  This event is [emitted](/up.emit) when a modal dialog
-  is done [closing](/up.modal.close).
-
-  @event up:modal:closed
-  @stable
-  ###
-
-  autoclose = ->
-    unless state.sticky
-      discardHistory()
-      closeAsap()
-
-  ###**
-  Returns whether the given element or selector is contained
-  within the current modal.
-
-  @function up.modal.contains
-  @param {string} elementOrSelector
-    The element to test
-  @return {boolean}
-  @stable
-  ###
-  contains = (elementOrSelector) ->
-    element = e.get(elementOrSelector)
-    !!e.closest(element, '.up-modal')
-
-  flavor = (name, overrideConfig = {}) ->
-    up.legacy.warn('up.modal.flavor() is deprecated. Use the up.modal.flavors property instead.')
-    u.assign(flavorOverrides(name), overrideConfig)
-
-  ###**
-  Returns a config object for the given flavor.
-  Properties in that config should be preferred to the defaults in
-  [`/up.modal.config`](/up.modal.config).
-
-  @function flavorOverrides
-  @internal
-  ###
-  flavorOverrides = (flavor) ->
-    flavors[flavor] ||= {}
-
-  ###**
-  Returns the config option for the current flavor.
-
-  @function flavorDefault
-  @internal
-  ###
-  flavorDefault = (key, flavorName = state.flavor) ->
-    value = flavorOverrides(flavorName)[key] if flavorName
-    value = config[key] if u.isMissing(value)
-    value
-
-  ###**
-  Clicking this link will load the destination via AJAX and open
-  the given selector in a modal dialog.
-
-  \#\#\# Example
-
-      <a href="/blogs" up-modal=".blog-list">Switch blog</a>
-
-  Clicking would request the path `/blog` and select `.blog-list` from
-  the HTML response. Unpoly will dim the page
-  and place the matching `.blog-list` tag in
-  a modal dialog.
-
-  @selector a[up-modal]
-  @param {string} up-modal
-    The CSS selector that will be extracted from the response and displayed in a modal dialog.
-  @param {string} [up-confirm]
-    A message that will be displayed in a cancelable confirmation dialog
-    before the modal is opened.
-  @param {string} [up-method='GET']
-    Override the request method.
-  @param {string} [up-sticky]
-    If set to `"true"`, the modal remains
-    open even if the page changes in the background.
-  @param {boolean} [up-closable]
-    When `true`, the modal will render a close icon and close when the user
-    clicks on the backdrop or presses Escape.
-
-    When `false`, you need to either supply an element with `[up-close]` or
-    close the modal manually with `up.modal.close()`.
-  @param {string} [up-animation]
-    The animation to use when opening the viewport containing the dialog.
-  @param {string} [up-backdrop-animation]
-    The animation to use when opening the backdrop that dims the page below the dialog.
-  @param {string} [up-height]
-    The width of the dialog in pixels.
-    By [default](/up.modal.config) the dialog will grow to fit its contents.
-  @param {string} [up-width]
-    The width of the dialog in pixels.
-    By [default](/up.modal.config) the dialog will grow to fit its contents.
-  @param {string} [up-history]
-    Whether to push an entry to the browser history for the modal's source URL.
-
-    Set this to `'false'` to prevent the URL bar from being updated.
-    Set this to a URL string to update the history with the given URL.
-
-  @stable
-  ###
-  up.link.addFollowVariant '[up-modal]',
-    # Don't just pass the `follow` function reference so we can stub it in tests
-    follow: (link, options) -> followAsap(link, options)
-    preload: (link, options) -> preloadNow(link, options)
-
-  # Close the modal when someone clicks outside the dialog (but not on a modal opener).
-  # We register the event on .up-modal, which covers the *entire* viewport, not just
-  # the dialog area.
-  #
-  # Note that we cannot listen to clicks on .up-modal-backdrop, which is a sister element
-  # of .up-modal-viewport. Since the user will effectively click on the viewport, not
-  # the backdrop, backdrop will not receive a bubbling event.
-  up.on('click', '.up-modal', (event) ->
-    return unless state.closable
-
-    target = event.target
-    unless e.closest(target, '.up-modal-dialog') || e.closest(target, '[up-modal]')
-      up.event.consumeAction(event)
-      u.muteRejection closeAsap()
-  )
-
-  up.on('up:fragment:inserted', (event, fragment) ->
-    if contains(fragment)
-      if newSource = fragment.getAttribute('up-source')
-        state.url = newSource
-    else if event.origin && contains(event.origin) && !up.popup.contains(fragment)
-      u.muteRejection autoclose()
-  )
-
-  # Close the pop-up overlay when the user presses ESC.
-  up.event.onEscape ->
-    if state.closable
-      u.muteRejection closeAsap()
-
-  ###**
-  When this element is clicked, closes a currently open dialog.
-
-  Does nothing if no modal is currently open.
-
-  To make a link that closes the current modal, but follows to
-  a fallback destination if no modal is open:
-
-      <a href="/fallback" up-close>Okay</a>
-
-  @selector .up-modal [up-close]
-  @stable
-  ###
-  up.on('click', '.up-modal [up-close]', (event) ->
-    u.muteRejection closeAsap()
-    # If the user closes the modal by clicking on the background, we want to halt the event chain here.
-    # The event should not trigger anything else. The user needs to click again for another interaction.
-    # Also only prevent the default when we actually closed a modal.
-    # This way we can have buttons that close a modal when within a modal, but link to a destination if not.
-    up.event.consumeAction(event)
-  )
-
-  ###**
-  Clicking this link will load the destination via AJAX and open
-  the given selector in a modal drawer that slides in from the edge of the screen.
-
-  You can configure drawers using the [`up.modal.flavors.drawer`](/up.modal.flavors.drawer) property.
-
-  \#\#\# Example
-
-      <a href="/blogs" up-drawer=".blog-list">Switch blog</a>
-
-  Clicking would request the path `/blog` and select `.blog-list` from
-  the HTML response. Unpoly will dim the page
-  and place the matching `.blog-list` tag will be placed in
-  a modal drawer.
-
-  @selector a[up-drawer]
-  @param {string} up-drawer
-    The CSS selector to extract from the response and open in the drawer.
-  @param {string} [up-position='auto']
-    The side from which the drawer slides in.
-
-    Valid values are `'left'`, `'right'` and `'auto'`. If set to `'auto'`, the
-    drawer will slide in from left if the opening link is on the left half of the screen.
-    Otherwise it will slide in from the right.
-  @stable
-  ###
-  up.macro 'a[up-drawer], [up-href][up-drawer]', (link) ->
-    target = link.getAttribute('up-drawer')
-    e.setAttrs link,
-      'up-modal': target
-      'up-flavor': 'drawer'
-
-  ###**
-  Sets default options for future drawers.
-
-  @property up.modal.flavors.drawer
-  @param {Object} config
-    Default options for future drawers.
-
-    See [`up.modal.config`](/up.modal.config) for available options.
-  @experimental
-  ###
-  flavors.drawer =
-    openAnimation: (options) ->
-      switch options.position
-        when 'left' then 'move-from-left'
-        when 'right' then 'move-from-right'
-    closeAnimation: (options) ->
-      switch options.position
-        when 'left' then 'move-to-left'
-        when 'right' then 'move-to-right'
-    position: (options) ->
-      if u.isPresent(options.link)
-        u.horizontalScreenHalf(options.link)
-      else
-        # In case the drawer was opened programmatically through Javascript,
-        # we might now know the link that was clicked on.
-        'left'
-
-  # When the user uses the back button we will usually restore <body> or a base container.
-  # We close any open modal because it probably won't match the restored state.
-  up.on 'up:history:restore', ->
-    u.muteRejection closeAsap()
-
-  # The framework is reset between tests
-  up.on 'up:framework:reset', reset
-
-  <% if ENV['JS_KNIFE'] %>knife: eval(Knife.point)<% end %>
-  visit: visitAsap
-  follow: followAsap
-  extract: extractAsap
-  close: closeAsap
-  url: -> state.url
-  coveredUrl: -> state.coveredUrl
-  config: config
-  flavors: flavors
-  contains: contains
-  isOpen: isOpen
-  flavor: flavor # deprecated