ultra_light_wizard 0.1.2 → 0.1.3

data/spec/fixtures/ref_rails_app/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/spec/fixtures/ref_rails_app/config/environments/development.rb

@@ -0,0 +1,41 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/fixtures/ref_rails_app/config/environments/production.rb

@@ -0,0 +1,79 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/spec/fixtures/ref_rails_app/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static file server for tests with Cache-Control for performance.
+  config.serve_static_files   = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Randomize the order test cases are executed.
+  config.active_support.test_order = :random
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/fixtures/ref_rails_app/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/spec/fixtures/ref_rails_app/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/spec/fixtures/ref_rails_app/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/fixtures/ref_rails_app/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/spec/fixtures/ref_rails_app/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/spec/fixtures/ref_rails_app/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/spec/fixtures/ref_rails_app/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_ref_rails_app_session'

data/spec/fixtures/ref_rails_app/config/initializers/to_time_preserves_timezone.rb

@@ -0,0 +1,10 @@
+# Be sure to restart your server when you modify this file.
+
+# Preserve the timezone of the receiver when calling to `to_time`.
+# Ruby 2.4 will change the behavior of `to_time` to preserve the timezone
+# when converting to an instance of `Time` instead of the previous behavior
+# of converting to the local system timezone.
+#
+# Rails 5.0 introduced this config option so that apps made with earlier
+# versions of Rails are not affected when upgrading.
+ActiveSupport.to_time_preserves_timezone = true

data/spec/fixtures/ref_rails_app/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/spec/fixtures/ref_rails_app/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/spec/fixtures/ref_rails_app/config/routes.rb

@@ -0,0 +1,56 @@
+Rails.application.routes.draw do
+  # The priority is based upon order of creation: first created -> highest priority.
+  # See how all your routes lay out with "rake routes".
+
+  # You can have the root of your site routed with "root"
+  # root 'welcome#index'
+
+  # Example of regular route:
+  #   get 'products/:id' => 'catalog#view'
+
+  # Example of named route that can be invoked with purchase_url(id: product.id)
+  #   get 'products/:id/purchase' => 'catalog#purchase', as: :purchase
+
+  # Example resource route (maps HTTP verbs to controller actions automatically):
+  #   resources :products
+
+  # Example resource route with options:
+  #   resources :products do
+  #     member do
+  #       get 'short'
+  #       post 'toggle'
+  #     end
+  #
+  #     collection do
+  #       get 'sold'
+  #     end
+  #   end
+
+  # Example resource route with sub-resources:
+  #   resources :products do
+  #     resources :comments, :sales
+  #     resource :seller
+  #   end
+
+  # Example resource route with more complex sub-resources:
+  #   resources :products do
+  #     resources :comments
+  #     resources :sales do
+  #       get 'recent', on: :collection
+  #     end
+  #   end
+
+  # Example resource route with concerns:
+  #   concern :toggleable do
+  #     post 'toggle'
+  #   end
+  #   resources :posts, concerns: :toggleable
+  #   resources :photos, concerns: :toggleable
+
+  # Example resource route within a namespace:
+  #   namespace :admin do
+  #     # Directs /admin/products/* to Admin::ProductsController
+  #     # (app/controllers/admin/products_controller.rb)
+  #     resources :products
+  #   end
+end

data/spec/fixtures/ref_rails_app/config/secrets.yml

@@ -0,0 +1,22 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+development:
+  secret_key_base: 9005137096d90c14c94aed5accc13d66bdf114e3dc8a33ebf1e8ec77b7a5e7246062e406065d3eb388d6d5a96eaadf6064e2ce9062926b9aa36056f7ac5c2fde
+
+test:
+  secret_key_base: 40ae2e0affd5c1c81c29d5baa11e4ca252464fcc149a10a482d185618b41c97d3db2c6664e3f18162a43ee225a77d7d6ce64ff80b53eabe7bef707b6c282c225
+
+# Do not keep production secrets in the repository,
+# instead read values from the environment.
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/spec/fixtures/ref_rails_app/db/schema.rb

@@ -0,0 +1,16 @@
+# encoding: UTF-8
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema.define(version: 0) do
+
+end

data/spec/fixtures/ref_rails_app/db/seeds.rb

@@ -0,0 +1,7 @@
+# This file should contain all the record creation needed to seed the database with its default values.
+# The data can then be loaded with the rake db:seed (or created alongside the db with db:setup).
+#
+# Examples:
+#
+#   cities = City.create([{ name: 'Chicago' }, { name: 'Copenhagen' }])
+#   Mayor.create(name: 'Emanuel', city: cities.first)

data/spec/fixtures/ref_rails_app/public/404.html

@@ -0,0 +1,67 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The page you were looking for doesn't exist (404)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/404.html -->
+  <div class="dialog">
+    <div>
+      <h1>The page you were looking for doesn't exist.</h1>
+      <p>You may have mistyped the address or the page may have moved.</p>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>