tzinfo 1.2.5 → 2.0.5

data/lib/tzinfo/zoneinfo_data_source.rb

@@ -1,488 +0,0 @@
-module TZInfo
-  # An InvalidZoneinfoDirectory exception is raised if the DataSource is
-  # set to a specific zoneinfo path, which is not a valid zoneinfo directory
-  # (i.e. a directory containing index files named iso3166.tab and zone.tab
-  # as well as other timezone files).
-  class InvalidZoneinfoDirectory < StandardError
-  end
-  
-  # A ZoneinfoDirectoryNotFound exception is raised if no valid zoneinfo 
-  # directory could be found when checking the paths listed in
-  # ZoneinfoDataSource.search_path. A valid zoneinfo directory is one that
-  # contains timezone files, a country code index file named iso3166.tab and a
-  # timezone index file named zone1970.tab or zone.tab.
-  class ZoneinfoDirectoryNotFound < StandardError
-  end
-  
-  # A DataSource that loads data from a 'zoneinfo' directory containing
-  # compiled "TZif" version 3 (or earlier) files in addition to iso3166.tab and
-  # zone1970.tab or zone.tab index files.
-  #
-  # To have TZInfo load the system zoneinfo files, call TZInfo::DataSource.set 
-  # as follows:
-  #
-  #   TZInfo::DataSource.set(:zoneinfo)
-  #
-  # To load zoneinfo files from a particular directory, pass the directory to 
-  # TZInfo::DataSource.set:
-  #
-  #   TZInfo::DataSource.set(:zoneinfo, directory)
-  #
-  # Note that the platform used at runtime may limit the range of available
-  # transition data that can be loaded from zoneinfo files. There are two
-  # factors to consider:
-  #
-  # First of all, the zoneinfo support in TZInfo makes use of Ruby's Time class. 
-  # On 32-bit builds of Ruby 1.8, the Time class only supports 32-bit 
-  # timestamps. This means that only Times between 1901-12-13 20:45:52 and
-  # 2038-01-19 03:14:07 can be represented. Furthermore, certain platforms only
-  # allow for positive 32-bit timestamps (notably Windows), making the earliest
-  # representable time 1970-01-01 00:00:00.
-  #
-  # 64-bit builds of Ruby 1.8 and all builds of Ruby 1.9 support 64-bit 
-  # timestamps. This means that there is no practical restriction on the range
-  # of the Time class on these platforms.
-  #
-  # TZInfo will only load transitions that fall within the supported range of
-  # the Time class. Any queries performed on times outside of this range may
-  # give inaccurate results.
-  #
-  # The second factor concerns the zoneinfo files. Versions of the 'zic' tool
-  # (used to build zoneinfo files) that were released prior to February 2006
-  # created zoneinfo files that used 32-bit integers for transition timestamps.
-  # Later versions of zic produce zoneinfo files that use 64-bit integers. If
-  # you have 32-bit zoneinfo files on your system, then any queries falling
-  # outside of the range 1901-12-13 20:45:52 to 2038-01-19 03:14:07 may be
-  # inaccurate.
-  #
-  # Most modern platforms include 64-bit zoneinfo files. However, Mac OS X (up
-  # to at least 10.8.4) still uses 32-bit zoneinfo files.
-  #
-  # To check whether your zoneinfo files contain 32-bit or 64-bit transition
-  # data, you can run the following code (substituting the identifier of the 
-  # zone you want to test for zone_identifier):
-  #
-  #   TZInfo::DataSource.set(:zoneinfo)
-  #   dir = TZInfo::DataSource.get.zoneinfo_dir
-  #   File.open(File.join(dir, zone_identifier), 'r') {|f| f.read(5) }
-  #
-  # If the last line returns "TZif\\x00", then you have a 32-bit zoneinfo file.
-  # If it returns "TZif2" or "TZif3" then you have a 64-bit zoneinfo file.
-  #
-  # If you require support for 64-bit transitions, but are restricted to 32-bit
-  # zoneinfo support, then you may want to consider using TZInfo::RubyDataSource 
-  # instead.
-  class ZoneinfoDataSource < DataSource
-    # The default value of ZoneinfoDataSource.search_path.
-    DEFAULT_SEARCH_PATH = ['/usr/share/zoneinfo', '/usr/share/lib/zoneinfo', '/etc/zoneinfo'].freeze
-    
-    # The default value of ZoneinfoDataSource.alternate_iso3166_tab_search_path.
-    DEFAULT_ALTERNATE_ISO3166_TAB_SEARCH_PATH = ['/usr/share/misc/iso3166.tab', '/usr/share/misc/iso3166'].freeze
-    
-    # Paths to be checked to find the system zoneinfo directory.
-    @@search_path = DEFAULT_SEARCH_PATH.dup
-    
-    # Paths to possible alternate iso3166.tab files (used to locate the 
-    # system-wide iso3166.tab files on FreeBSD and OpenBSD).
-    @@alternate_iso3166_tab_search_path = DEFAULT_ALTERNATE_ISO3166_TAB_SEARCH_PATH.dup
-    
-    # An Array of directories that will be checked to find the system zoneinfo
-    # directory.
-    #
-    # Directories are checked in the order they appear in the Array.
-    #
-    # The default value is ['/usr/share/zoneinfo', '/usr/share/lib/zoneinfo', '/etc/zoneinfo'].
-    def self.search_path
-      @@search_path
-    end
-    
-    # Sets the directories to be checked when locating the system zoneinfo 
-    # directory.
-    #
-    # Can be set to an Array of directories or a String containing directories
-    # separated with File::PATH_SEPARATOR.
-    #
-    # Directories are checked in the order they appear in the Array or String.
-    #
-    # Set to nil to revert to the default paths.
-    def self.search_path=(search_path)
-      @@search_path = process_search_path(search_path, DEFAULT_SEARCH_PATH)      
-    end
-    
-    # An Array of paths that will be checked to find an alternate iso3166.tab 
-    # file if one was not included in the zoneinfo directory (for example, on 
-    # FreeBSD and OpenBSD systems).
-    #
-    # Paths are checked in the order they appear in the array.
-    #
-    # The default value is ['/usr/share/misc/iso3166.tab', '/usr/share/misc/iso3166'].
-    def self.alternate_iso3166_tab_search_path
-      @@alternate_iso3166_tab_search_path
-    end
-    
-    # Sets the paths to check to locate an alternate iso3166.tab file if one was
-    # not included in the zoneinfo directory.
-    #
-    # Can be set to an Array of directories or a String containing directories
-    # separated with File::PATH_SEPARATOR.
-    #
-    # Paths are checked in the order they appear in the array.
-    #
-    # Set to nil to revert to the default paths.
-    def self.alternate_iso3166_tab_search_path=(alternate_iso3166_tab_search_path)
-      @@alternate_iso3166_tab_search_path = process_search_path(alternate_iso3166_tab_search_path, DEFAULT_ALTERNATE_ISO3166_TAB_SEARCH_PATH)
-    end
-    
-    # The zoneinfo directory being used.
-    attr_reader :zoneinfo_dir
-    
-    # Creates a new ZoneinfoDataSource.
-    #
-    # If zoneinfo_dir is specified, it will be checked and used as the source
-    # of zoneinfo files. 
-    #
-    # The directory must contain a file named iso3166.tab and a file named
-    # either zone1970.tab or zone.tab. These may either be included in the root
-    # of the directory or in a 'tab' sub-directory and named 'country.tab' and
-    # 'zone_sun.tab' respectively (as is the case on Solaris.
-    #
-    # Additionally, the path to iso3166.tab can be overridden using the 
-    # alternate_iso3166_tab_path parameter.
-    #
-    # InvalidZoneinfoDirectory will be raised if the iso3166.tab and
-    # zone1970.tab or zone.tab files cannot be found using the zoneinfo_dir and
-    # alternate_iso3166_tab_path parameters.
-    # 
-    # If zoneinfo_dir is not specified or nil, the paths referenced in
-    # search_path are searched in order to find a valid zoneinfo directory 
-    # (one that contains zone1970.tab or zone.tab and iso3166.tab files as
-    # above).
-    #
-    # The paths referenced in alternate_iso3166_tab_search_path are also
-    # searched to find an iso3166.tab file if one of the searched zoneinfo
-    # directories doesn't contain an iso3166.tab file.
-    # 
-    # If no valid directory can be found by searching, ZoneinfoDirectoryNotFound
-    # will be raised.
-    def initialize(zoneinfo_dir = nil, alternate_iso3166_tab_path = nil)
-      if zoneinfo_dir
-        iso3166_tab_path, zone_tab_path = validate_zoneinfo_dir(zoneinfo_dir, alternate_iso3166_tab_path)
-      
-        unless iso3166_tab_path && zone_tab_path
-          raise InvalidZoneinfoDirectory, "#{zoneinfo_dir} is not a directory or doesn't contain a iso3166.tab file and a zone1970.tab or zone.tab file." 
-        end
-        
-        @zoneinfo_dir = zoneinfo_dir
-      else
-        @zoneinfo_dir, iso3166_tab_path, zone_tab_path = find_zoneinfo_dir
-        
-        unless @zoneinfo_dir && iso3166_tab_path && zone_tab_path
-          raise ZoneinfoDirectoryNotFound, "None of the paths included in TZInfo::ZoneinfoDataSource.search_path are valid zoneinfo directories."
-        end
-      end
-      
-      @zoneinfo_dir = File.expand_path(@zoneinfo_dir).freeze
-      @timezone_index = load_timezone_index.freeze
-      @country_index = load_country_index(iso3166_tab_path, zone_tab_path).freeze
-    end
-    
-    # Returns a TimezoneInfo instance for a given identifier. 
-    # Raises InvalidTimezoneIdentifier if the timezone is not found or the 
-    # identifier is invalid.
-    def load_timezone_info(identifier)
-      begin
-        if @timezone_index.include?(identifier)
-          path = File.join(@zoneinfo_dir, identifier)
-          
-          # Untaint path rather than identifier. We don't want to modify 
-          # identifier. identifier may also be frozen and therefore cannot be
-          # untainted.
-          path.untaint
-          
-          begin
-            ZoneinfoTimezoneInfo.new(identifier, path)
-          rescue InvalidZoneinfoFile => e
-            raise InvalidTimezoneIdentifier, e.message
-          end
-        else
-          raise InvalidTimezoneIdentifier, 'Invalid identifier'
-        end
-      rescue Errno::ENOENT, Errno::ENAMETOOLONG, Errno::ENOTDIR
-        raise InvalidTimezoneIdentifier, 'Invalid identifier'
-      rescue Errno::EACCES => e
-        raise InvalidTimezoneIdentifier, e.message
-      end
-    end    
-    
-    # Returns an array of all the available timezone identifiers.
-    def timezone_identifiers
-      @timezone_index
-    end
-    
-    # Returns an array of all the available timezone identifiers for
-    # data timezones (i.e. those that actually contain definitions).
-    #
-    # For ZoneinfoDataSource, this will always be identical to 
-    # timezone_identifers.
-    def data_timezone_identifiers
-      @timezone_index
-    end
-    
-    # Returns an array of all the available timezone identifiers that
-    # are links to other timezones.
-    #
-    # For ZoneinfoDataSource, this will always be an empty array.
-    def linked_timezone_identifiers
-      [].freeze
-    end
-    
-    # Returns a CountryInfo instance for the given ISO 3166-1 alpha-2
-    # country code. Raises InvalidCountryCode if the country could not be found
-    # or the code is invalid.
-    def load_country_info(code)
-      info = @country_index[code]
-      raise InvalidCountryCode, 'Invalid country code' unless info
-      info
-    end
-    
-    # Returns an array of all the available ISO 3166-1 alpha-2
-    # country codes.
-    def country_codes
-      @country_index.keys.freeze
-    end
-    
-    # Returns the name and information about this DataSource.
-    def to_s
-      "Zoneinfo DataSource: #{@zoneinfo_dir}"
-    end
-    
-    # Returns internal object state as a programmer-readable string.
-    def inspect
-      "#<#{self.class}: #{@zoneinfo_dir}>"
-    end    
-    
-    private
-    
-    # Processes a path for use as the search_path or
-    # alternate_iso3166_tab_search_path.
-    def self.process_search_path(path, default)
-      if path
-        if path.kind_of?(String)
-          path.split(File::PATH_SEPARATOR)
-        else
-          path.collect {|p| p.to_s}
-        end
-      else
-        default.dup
-      end
-    end
-    
-    # Validates a zoneinfo directory and returns the paths to the iso3166.tab 
-    # and zone1970.tab or zone.tab files if valid. If the directory is not
-    # valid, returns nil.
-    #
-    # The path to the iso3166.tab file may be overriden by passing in a path.
-    # This is treated as either absolute or relative to the current working
-    # directory.    
-    def validate_zoneinfo_dir(path, iso3166_tab_path = nil)
-      if File.directory?(path)
-        if iso3166_tab_path
-          return nil unless File.file?(iso3166_tab_path)
-        else
-          iso3166_tab_path = resolve_tab_path(path, ['iso3166.tab'], 'country.tab')
-          return nil unless iso3166_tab_path          
-        end
-        
-        zone_tab_path = resolve_tab_path(path, ['zone1970.tab', 'zone.tab'], 'zone_sun.tab')
-        return nil unless zone_tab_path
-      
-        [iso3166_tab_path, zone_tab_path]
-      else
-        nil
-      end
-    end
-    
-    # Attempts to resolve the path to a tab file given its standard names and
-    # tab sub-directory name (as used on Solaris).
-    def resolve_tab_path(zoneinfo_path, standard_names, tab_name)
-      standard_names.each do |standard_name|
-        path = File.join(zoneinfo_path, standard_name)
-        return path if File.file?(path)
-      end
-      
-      path = File.join(zoneinfo_path, 'tab', tab_name)
-      return path if File.file?(path)
-      
-      nil
-    end
-    
-    # Finds a zoneinfo directory using search_path and 
-    # alternate_iso3166_tab_search_path. Returns the paths to the directory,
-    # the iso3166.tab file and the zone.tab file or nil if not found.
-    def find_zoneinfo_dir
-      alternate_iso3166_tab_path = self.class.alternate_iso3166_tab_search_path.detect do |path|
-        File.file?(path)
-      end
-      
-      self.class.search_path.each do |path|
-        # Try without the alternate_iso3166_tab_path first.
-        iso3166_tab_path, zone_tab_path = validate_zoneinfo_dir(path)        
-        return path, iso3166_tab_path, zone_tab_path if iso3166_tab_path && zone_tab_path
-        
-        if alternate_iso3166_tab_path
-          iso3166_tab_path, zone_tab_path = validate_zoneinfo_dir(path, alternate_iso3166_tab_path)        
-          return path, iso3166_tab_path, zone_tab_path if iso3166_tab_path && zone_tab_path
-        end
-      end
-      
-      # Not found.
-      nil
-    end
-       
-    # Scans @zoneinfo_dir and returns an Array of available timezone 
-    # identifiers.
-    def load_timezone_index
-      index = []
-      
-      # Ignoring particular files:
-      # +VERSION is included on Mac OS X.
-      # leapseconds is a list of leap seconds.
-        # localtime is the current local timezone (may be a link).
-      # posix, posixrules and right are directories containing other versions of the zoneinfo files.
-      # src is a directory containing the tzdata source included on Solaris.
-      # timeconfig is a symlink included on Slackware.
-      
-      enum_timezones(nil, ['+VERSION', 'leapseconds', 'localtime', 'posix', 'posixrules', 'right', 'src', 'timeconfig']) do |identifier|
-        index << identifier
-      end
-      
-      index.sort
-    end
-    
-    # Recursively scans a directory of timezones, calling the passed in block
-    # for each identifier found.
-    def enum_timezones(dir, exclude = [], &block)
-      Dir.foreach(dir ? File.join(@zoneinfo_dir, dir) : @zoneinfo_dir) do |entry|
-        unless entry =~ /\./ || exclude.include?(entry)
-          entry.untaint
-          path = dir ? File.join(dir, entry) : entry
-          full_path = File.join(@zoneinfo_dir, path)
- 
-          if File.directory?(full_path)
-            enum_timezones(path, [], &block)
-          elsif File.file?(full_path)
-            yield path
-          end
-        end
-      end
-    end
-    
-    # Uses the iso3166.tab and zone1970.tab or zone.tab files to build an index
-    # of the available countries and their timezones.
-    def load_country_index(iso3166_tab_path, zone_tab_path)
-      
-      # Handle standard 3 to 4 column zone.tab files as well as the 4 to 5 
-      # column format used by Solaris.
-      #
-      # On Solaris, an extra column before the comment gives an optional 
-      # linked/alternate timezone identifier (or '-' if not set).
-      #
-      # Additionally, there is a section at the end of the file for timezones
-      # covering regions. These are given lower-case "country" codes. The timezone
-      # identifier column refers to a continent instead of an identifier. These
-      # lines will be ignored by TZInfo.
-      #
-      # Since the last column is optional in both formats, testing for the 
-      # Solaris format is done in two passes. The first pass identifies if there
-      # are any lines using 5 columns.
-
-
-      # The first column is allowed to be a comma separated list of country
-      # codes, as used in zone1970.tab (introduced in tzdata 2014f).
-      #
-      # The first country code in the comma-separated list is the country that
-      # contains the city the zone identifer is based on. The first country
-      # code on each line is considered to be primary with the others
-      # secondary.
-      #
-      # The zones for each country are ordered primary first, then secondary.
-      # Within the primary and secondary groups, the zones are ordered by their
-      # order in the file.
-      
-      file_is_5_column = false
-      zone_tab = []
-      
-      RubyCoreSupport.open_file(zone_tab_path, 'r', :external_encoding => 'UTF-8', :internal_encoding => 'UTF-8') do |file|
-        file.each_line do |line|
-          line.chomp!
-          
-          if line =~ /\A([A-Z]{2}(?:,[A-Z]{2})*)\t(?:([+\-])(\d{2})(\d{2})([+\-])(\d{3})(\d{2})|([+\-])(\d{2})(\d{2})(\d{2})([+\-])(\d{3})(\d{2})(\d{2}))\t([^\t]+)(?:\t([^\t]+))?(?:\t([^\t]+))?\z/
-            codes = $1
-            
-            if $2
-              latitude = dms_to_rational($2, $3, $4)
-              longitude = dms_to_rational($5, $6, $7)
-            else
-              latitude = dms_to_rational($8, $9, $10, $11)
-              longitude = dms_to_rational($12, $13, $14, $15)
-            end
-            
-            zone_identifier = $16
-            column4 = $17
-            column5 = $18
-            
-            file_is_5_column = true if column5
-            
-            zone_tab << [codes.split(','.freeze), zone_identifier, latitude, longitude, column4, column5]
-          end
-        end
-      end
-      
-      primary_zones = {}
-      secondary_zones = {}
-      
-      zone_tab.each do |codes, zone_identifier, latitude, longitude, column4, column5|
-        description = file_is_5_column ? column5 : column4
-        country_timezone = CountryTimezone.new(zone_identifier, latitude, longitude, description)
-
-        # codes will always have at least one element
-
-        (primary_zones[codes.first] ||= []) << country_timezone
-
-        codes[1..-1].each do |code|
-          (secondary_zones[code] ||= []) << country_timezone
-        end
-      end
-      
-      countries = {}
-      
-      RubyCoreSupport.open_file(iso3166_tab_path, 'r', :external_encoding => 'UTF-8', :internal_encoding => 'UTF-8') do |file|
-        file.each_line do |line|
-          line.chomp!
-          
-          # Handle both the two column alpha-2 and name format used in the tz 
-          # database as well as the 4 column alpha-2, alpha-3, numeric-3 and 
-          # name format used by FreeBSD and OpenBSD.
-          
-          if line =~ /\A([A-Z]{2})(?:\t[A-Z]{3}\t[0-9]{3})?\t(.+)\z/
-            code = $1
-            name = $2
-            zones = (primary_zones[code] || []) + (secondary_zones[code] || [])
-
-            countries[code] = ZoneinfoCountryInfo.new(code, name, zones)
-          end
-        end
-      end
-      
-      countries
-    end
-    
-    # Converts degrees, minutes and seconds to a Rational.
-    def dms_to_rational(sign, degrees, minutes, seconds = nil)
-      result = degrees.to_i + Rational(minutes.to_i, 60)
-      result += Rational(seconds.to_i, 3600) if seconds
-      result = -result if sign == '-'.freeze
-      result
-    end
-  end
-end