typo 5.3 → 5.4

data/public/javascripts/fckeditor/editor/filemanager/connectors/perl/util.pl

@@ -1,68 +0,0 @@
-#####
-#  FCKeditor - The text editor for Internet - http://www.fckeditor.net
-#  Copyright (C) 2003-2008 Frederico Caldeira Knabben
-#
-#  == BEGIN LICENSE ==
-#
-#  Licensed under the terms of any of the following licenses at your
-#  choice:
-#
-#   - GNU General Public License Version 2 or later (the "GPL")
-#     http://www.gnu.org/licenses/gpl.html
-#
-#   - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
-#     http://www.gnu.org/licenses/lgpl.html
-#
-#   - Mozilla Public License Version 1.1 or later (the "MPL")
-#     http://www.mozilla.org/MPL/MPL-1.1.html
-#
-#  == END LICENSE ==
-#
-#  This is the File Manager Connector for Perl.
-#####
-
-sub RemoveFromStart
-{
-	local($sourceString, $charToRemove) = @_;
-	$sPattern = '^' . $charToRemove . '+' ;
-	$sourceString =~ s/^$charToRemove+//g;
-	return $sourceString;
-}
-
-sub RemoveFromEnd
-{
-	local($sourceString, $charToRemove) = @_;
-	$sPattern = $charToRemove . '+$' ;
-	$sourceString =~ s/$charToRemove+$//g;
-	return $sourceString;
-}
-
-sub ConvertToXmlAttribute
-{
-	local($value) = @_;
-	return $value;
-#	return utf8_encode(htmlspecialchars($value));
-
-}
-
-sub specialchar_cnv
-{
-	local($ch) = @_;
-
-	$ch =~ s/&/&/g;		# &
-	$ch =~ s/\"/"/g;	#"
-	$ch =~ s/\'/'/g;	# '
-	$ch =~ s/</&lt;/g;		# <
-	$ch =~ s/>/&gt;/g;		# >
-	return($ch);
-}
-
-sub JS_cnv
-{
-	local($ch) = @_;
-
-	$ch =~ s/\"/\\\"/g;	#"
-	return($ch);
-}
-
-1;

data/public/javascripts/fckeditor/editor/filemanager/connectors/py/config.py

@@ -1,146 +0,0 @@
-#!/usr/bin/env python
-"""
- * FCKeditor - The text editor for Internet - http://www.fckeditor.net
- * Copyright (C) 2003-2008 Frederico Caldeira Knabben
- *
- * == BEGIN LICENSE ==
- *
- * Licensed under the terms of any of the following licenses at your
- * choice:
- *
- *  - GNU General Public License Version 2 or later (the "GPL")
- *    http://www.gnu.org/licenses/gpl.html
- *
- *  - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
- *    http://www.gnu.org/licenses/lgpl.html
- *
- *  - Mozilla Public License Version 1.1 or later (the "MPL")
- *    http://www.mozilla.org/MPL/MPL-1.1.html
- *
- * == END LICENSE ==
- *
- * Configuration file for the File Manager Connector for Python
-"""
-
-# INSTALLATION NOTE: You must set up your server environment accordingly to run
-# python scripts. This connector requires Python 2.4 or greater.
-#
-# Supported operation modes:
-#  * WSGI (recommended): You'll need apache + mod_python + modpython_gateway
-#                        or any web server capable of the WSGI python standard
-#  * Plain Old CGI:      Any server capable of running standard python scripts
-#                        (although mod_python is recommended for performance)
-#                        This was the previous connector version operation mode
-#
-# If you're using Apache web server, replace the htaccess.txt to to .htaccess,
-# and set the proper options and paths.
-# For WSGI and mod_python, you may need to download modpython_gateway from:
-# http://projects.amor.org/misc/svn/modpython_gateway.py and copy it in this
-# directory.
-
-
-# SECURITY: You must explicitly enable this "connector". (Set it to "True").
-# WARNING: don't just set "ConfigIsEnabled = True", you must be sure that only
-#		authenticated users can access this file or use some kind of session checking.
-Enabled = False
-
-# Path to user files relative to the document root.
-UserFilesPath = '/userfiles/'
-
-# Fill the following value it you prefer to specify the absolute path for the
-# user files directory. Useful if you are using a virtual directory, symbolic
-# link or alias. Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
-# Attention: The above 'UserFilesPath' must point to the same directory.
-# WARNING: GetRootPath may not work in virtual or mod_python configurations, and
-# may not be thread safe. Use this configuration parameter instead.
-UserFilesAbsolutePath = ''
-
-# Due to security issues with Apache modules, it is recommended to leave the
-# following setting enabled.
-ForceSingleExtension = True
-
-# What the user can do with this connector
-ConfigAllowedCommands = [ 'QuickUpload', 'FileUpload', 'GetFolders', 'GetFoldersAndFiles', 'CreateFolder' ]
-
-# Allowed Resource Types
-ConfigAllowedTypes = ['File', 'Image', 'Flash', 'Media']
-
-# After file is uploaded, sometimes it is required to change its permissions
-# so that it was possible to access it at the later time.
-# If possible, it is recommended to set more restrictive permissions, like 0755.
-# Set to 0 to disable this feature.
-# Note: not needed on Windows-based servers.
-ChmodOnUpload = 0755
-
-# See comments above.
-# Used when creating folders that does not exist.
-ChmodOnFolderCreate = 0755
-
-# Do not touch this 3 lines, see "Configuration settings for each Resource Type"
-AllowedExtensions = {}; DeniedExtensions = {};
-FileTypesPath = {}; FileTypesAbsolutePath = {};
-QuickUploadPath = {}; QuickUploadAbsolutePath = {};
-
-#	Configuration settings for each Resource Type
-#
-#	- AllowedExtensions: the possible extensions that can be allowed.
-#		If it is empty then any file type can be uploaded.
-#	- DeniedExtensions: The extensions that won't be allowed.
-#		If it is empty then no restrictions are done here.
-#
-#	For a file to be uploaded it has to fulfill both the AllowedExtensions
-#	and DeniedExtensions (that's it: not being denied) conditions.
-#
-#	- FileTypesPath: the virtual folder relative to the document root where
-#		these resources will be located.
-#		Attention: It must start and end with a slash: '/'
-#
-#	- FileTypesAbsolutePath: the physical path to the above folder. It must be
-#		an absolute path.
-#		If it's an empty string then it will be autocalculated.
-#		Useful if you are using a virtual directory, symbolic link or alias.
-#		Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
-#		Attention: The above 'FileTypesPath' must point to the same directory.
-#		Attention: It must end with a slash: '/'
-#
-#
-#	- QuickUploadPath: the virtual folder relative to the document root where
-#		these resources will be uploaded using the Upload tab in the resources
-#		dialogs.
-#		Attention: It must start and end with a slash: '/'
-#
-#	- QuickUploadAbsolutePath: the physical path to the above folder. It must be
-#		an absolute path.
-#		If it's an empty string then it will be autocalculated.
-#		Useful if you are using a virtual directory, symbolic link or alias.
-#		Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
-#		Attention: The above 'QuickUploadPath' must point to the same directory.
-#		Attention: It must end with a slash: '/'
-
-AllowedExtensions['File'] 		= ['7z','aiff','asf','avi','bmp','csv','doc','fla','flv','gif','gz','gzip','jpeg','jpg','mid','mov','mp3','mp4','mpc','mpeg','mpg','ods','odt','pdf','png','ppt','pxd','qt','ram','rar','rm','rmi','rmvb','rtf','sdc','sitd','swf','sxc','sxw','tar','tgz','tif','tiff','txt','vsd','wav','wma','wmv','xls','xml','zip']
-DeniedExtensions['File'] 		= []
-FileTypesPath['File'] 			= UserFilesPath + 'file/'
-FileTypesAbsolutePath['File'] 	= (not UserFilesAbsolutePath == '') and (UserFilesAbsolutePath + 'file/') or ''
-QuickUploadPath['File']			= FileTypesPath['File']
-QuickUploadAbsolutePath['File']	= FileTypesAbsolutePath['File']
-
-AllowedExtensions['Image']		= ['bmp','gif','jpeg','jpg','png']
-DeniedExtensions['Image']		= []
-FileTypesPath['Image']			= UserFilesPath + 'image/'
-FileTypesAbsolutePath['Image']	= (not UserFilesAbsolutePath == '') and UserFilesAbsolutePath + 'image/' or ''
-QuickUploadPath['Image']		= FileTypesPath['Image']
-QuickUploadAbsolutePath['Image']= FileTypesAbsolutePath['Image']
-
-AllowedExtensions['Flash']		= ['swf','flv']
-DeniedExtensions['Flash']		= []
-FileTypesPath['Flash']			= UserFilesPath + 'flash/'
-FileTypesAbsolutePath['Flash']	= ( not UserFilesAbsolutePath == '') and UserFilesAbsolutePath + 'flash/' or ''
-QuickUploadPath['Flash']		= FileTypesPath['Flash']
-QuickUploadAbsolutePath['Flash']= FileTypesAbsolutePath['Flash']
-
-AllowedExtensions['Media']		= ['aiff','asf','avi','bmp','fla', 'flv','gif','jpeg','jpg','mid','mov','mp3','mp4','mpc','mpeg','mpg','png','qt','ram','rm','rmi','rmvb','swf','tif','tiff','wav','wma','wmv']
-DeniedExtensions['Media']		= []
-FileTypesPath['Media']			= UserFilesPath + 'media/'
-FileTypesAbsolutePath['Media']	= ( not UserFilesAbsolutePath == '') and UserFilesAbsolutePath + 'media/' or ''
-QuickUploadPath['Media']		= FileTypesPath['Media']
-QuickUploadAbsolutePath['Media']= FileTypesAbsolutePath['Media']

data/public/javascripts/fckeditor/editor/filemanager/connectors/py/connector.py

@@ -1,118 +0,0 @@
-#!/usr/bin/env python
-
-"""
-FCKeditor - The text editor for Internet - http://www.fckeditor.net
-Copyright (C) 2003-2008 Frederico Caldeira Knabben
-
-== BEGIN LICENSE ==
-
-Licensed under the terms of any of the following licenses at your
-choice:
-
- - GNU General Public License Version 2 or later (the "GPL")
-   http://www.gnu.org/licenses/gpl.html
-
- - GNU Lesser General Public License Version 2.1 or later (the "LGPL")
-   http://www.gnu.org/licenses/lgpl.html
-
- - Mozilla Public License Version 1.1 or later (the "MPL")
-   http://www.mozilla.org/MPL/MPL-1.1.html
-
-== END LICENSE ==
-
-Connector for Python (CGI and WSGI).
-
-See config.py for configuration settings
-
-"""
-import os
-
-from fckutil import *
-from fckcommands import * 	# default command's implementation
-from fckoutput import * 	# base http, xml and html output mixins
-from fckconnector import FCKeditorConnectorBase # import base connector
-import config as Config
-
-class FCKeditorConnector(	FCKeditorConnectorBase,
-							GetFoldersCommandMixin,
-							GetFoldersAndFilesCommandMixin,
-							CreateFolderCommandMixin,
-							UploadFileCommandMixin,
-							BaseHttpMixin, BaseXmlMixin, BaseHtmlMixin  ):
-	"The Standard connector class."
-	def doResponse(self):
-		"Main function. Process the request, set headers and return a string as response."
-		s = ""
-		# Check if this connector is disabled
-		if not(Config.Enabled):
-			return self.sendError(1, "This connector is disabled.  Please check the connector configurations in \"editor/filemanager/connectors/py/config.py\" and try again.")
-		# Make sure we have valid inputs
-		for key in ("Command","Type","CurrentFolder"):
-			if not self.request.has_key (key):
-				return
-		# Get command, resource type and current folder
-		command = self.request.get("Command")
-		resourceType = self.request.get("Type")
-		currentFolder = getCurrentFolder(self.request.get("CurrentFolder"))
-		# Check for invalid paths
-		if currentFolder is None:
-			return self.sendError(102, "")
-
-		# Check if it is an allowed command
-		if ( not command in Config.ConfigAllowedCommands ):
-			return self.sendError( 1, 'The %s command isn\'t allowed' % command )
-
-		if ( not resourceType in Config.ConfigAllowedTypes  ):
-			return self.sendError( 1, 'Invalid type specified' )
-
-		# Setup paths
-		if command == "QuickUpload":
-			self.userFilesFolder = Config.QuickUploadAbsolutePath[resourceType]
-			self.webUserFilesFolder =  Config.QuickUploadPath[resourceType]
-		else:
-			self.userFilesFolder = Config.FileTypesAbsolutePath[resourceType]
-			self.webUserFilesFolder = Config.FileTypesPath[resourceType]
-
-		if not self.userFilesFolder: # no absolute path given (dangerous...)
-			self.userFilesFolder = mapServerPath(self.environ,
-									self.webUserFilesFolder)
-		# Ensure that the directory exists.
-		if not os.path.exists(self.userFilesFolder):
-			try:
-				self.createServerFoldercreateServerFolder( self.userFilesFolder )
-			except:
-				return self.sendError(1, "This connector couldn\'t access to local user\'s files directories.  Please check the UserFilesAbsolutePath in \"editor/filemanager/connectors/py/config.py\" and try again. ")
-
-		# File upload doesn't have to return XML, so intercept here
-		if (command == "FileUpload"):
-			return self.uploadFile(resourceType, currentFolder)
-
-		# Create Url
-		url = combinePaths( self.webUserFilesFolder, currentFolder )
-
-		# Begin XML
-		s += self.createXmlHeader(command, resourceType, currentFolder, url)
-		# Execute the command
-		selector = {"GetFolders": self.getFolders,
-					"GetFoldersAndFiles": self.getFoldersAndFiles,
-					"CreateFolder": self.createFolder,
-					}
-		s += selector[command](resourceType, currentFolder)
-		s += self.createXmlFooter()
-		return s
-
-# Running from command line (plain old CGI)
-if __name__ == '__main__':
-	try:
-		# Create a Connector Instance
-		conn = FCKeditorConnector()
-		data = conn.doResponse()
-		for header in conn.headers:
-			print '%s: %s' % header
-		print
-		print data
-	except:
-		print "Content-Type: text/plain"
-		print
-		import cgi
-		cgi.print_exception()

data/public/javascripts/fckeditor/editor/filemanager/connectors/py/fckcommands.py

@@ -1,198 +0,0 @@
-#!/usr/bin/env python
-
-"""
-FCKeditor - The text editor for Internet - http://www.fckeditor.net
-Copyright (C) 2003-2008 Frederico Caldeira Knabben
-
-== BEGIN LICENSE ==
-
-Licensed under the terms of any of the following licenses at your
-choice:
-
-- GNU General Public License Version 2 or later (the "GPL")
-http://www.gnu.org/licenses/gpl.html
-
-- GNU Lesser General Public License Version 2.1 or later (the "LGPL")
-http://www.gnu.org/licenses/lgpl.html
-
-- Mozilla Public License Version 1.1 or later (the "MPL")
-http://www.mozilla.org/MPL/MPL-1.1.html
-
-== END LICENSE ==
-
-Connector for Python (CGI and WSGI).
-
-"""
-
-import os
-try: # Windows needs stdio set for binary mode for file upload to work.
-	import msvcrt
-	msvcrt.setmode (0, os.O_BINARY) # stdin  = 0
-	msvcrt.setmode (1, os.O_BINARY) # stdout = 1
-except ImportError:
-	pass
-
-from fckutil import *
-from fckoutput import *
-import config as Config
-
-class GetFoldersCommandMixin (object):
-	def getFolders(self, resourceType, currentFolder):
-		"""
-		Purpose: command to recieve a list of folders
-		"""
-		# Map the virtual path to our local server
-		serverPath = mapServerFolder(self.userFilesFolder,currentFolder)
-		s = """<Folders>"""	 # Open the folders node
-		for someObject in os.listdir(serverPath):
-			someObjectPath = mapServerFolder(serverPath, someObject)
-			if os.path.isdir(someObjectPath):
-				s += """<Folder name="%s" />""" % (
-						convertToXmlAttribute(someObject)
-						)
-		s += """</Folders>""" # Close the folders node
-		return s
-
-class GetFoldersAndFilesCommandMixin (object):
-	def getFoldersAndFiles(self, resourceType, currentFolder):
-		"""
-		Purpose: command to recieve a list of folders and files
-		"""
-		# Map the virtual path to our local server
-		serverPath = mapServerFolder(self.userFilesFolder,currentFolder)
-		# Open the folders / files node
-		folders = """<Folders>"""
-		files = """<Files>"""
-		for someObject in os.listdir(serverPath):
-			someObjectPath = mapServerFolder(serverPath, someObject)
-			if os.path.isdir(someObjectPath):
-				folders += """<Folder name="%s" />""" % (
-						convertToXmlAttribute(someObject)
-						)
-			elif os.path.isfile(someObjectPath):
-				size = os.path.getsize(someObjectPath)
-				files += """<File name="%s" size="%s" />""" % (
-						convertToXmlAttribute(someObject),
-						os.path.getsize(someObjectPath)
-						)
-		# Close the folders / files node
-		folders += """</Folders>"""
-		files += """</Files>"""
-		return folders + files
-
-class CreateFolderCommandMixin (object):
-	def createFolder(self, resourceType, currentFolder):
-		"""
-		Purpose: command to create a new folder
-		"""
-		errorNo = 0; errorMsg ='';
-		if self.request.has_key("NewFolderName"):
-			newFolder = self.request.get("NewFolderName", None)
-			newFolder = sanitizeFolderName (newFolder)
-			try:
-				newFolderPath = mapServerFolder(self.userFilesFolder, combinePaths(currentFolder, newFolder))
-				self.createServerFolder(newFolderPath)
-			except Exception, e:
-				errorMsg = str(e).decode('iso-8859-1').encode('utf-8') # warning with encodigns!!!
-				if hasattr(e,'errno'):
-					if e.errno==17: #file already exists
-						errorNo=0
-					elif e.errno==13: # permission denied
-						errorNo = 103
-					elif e.errno==36 or e.errno==2 or e.errno==22: # filename too long / no such file / invalid name
-						errorNo = 102
-				else:
-					errorNo = 110
-		else:
-			errorNo = 102
-		return self.sendErrorNode ( errorNo, errorMsg )
-
-	def createServerFolder(self, folderPath):
-		"Purpose: physically creates a folder on the server"
-		# No need to check if the parent exists, just create all hierachy
-
-		try:
-			permissions = Config.ChmodOnFolderCreate
-			if not permissions:
-				os.makedirs(folderPath)
-		except AttributeError: #ChmodOnFolderCreate undefined
-			permissions = 0755
-
-		if permissions:
-			oldumask = os.umask(0)
-			os.makedirs(folderPath,mode=0755)
-			os.umask( oldumask )
-
-class UploadFileCommandMixin (object):
-	def uploadFile(self, resourceType, currentFolder):
-		"""
-		Purpose: command to upload files to server (same as FileUpload)
-		"""
-		errorNo = 0
-		if self.request.has_key("NewFile"):
-			# newFile has all the contents we need
-			newFile = self.request.get("NewFile", "")
-			# Get the file name
-			newFileName = newFile.filename
-			newFileName = sanitizeFileName( newFileName )
-			newFileNameOnly = removeExtension(newFileName)
-			newFileExtension = getExtension(newFileName).lower()
-			allowedExtensions = Config.AllowedExtensions[resourceType]
-			deniedExtensions = Config.DeniedExtensions[resourceType]
-
-			if (allowedExtensions):
-				# Check for allowed
-				isAllowed = False
-				if (newFileExtension in allowedExtensions):
-					isAllowed = True
-			elif (deniedExtensions):
-				# Check for denied
-				isAllowed = True
-				if (newFileExtension in deniedExtensions):
-					isAllowed = False
-			else:
-				# No extension limitations
-				isAllowed = True
-
-			if (isAllowed):
-				# Upload to operating system
-				# Map the virtual path to the local server path
-				currentFolderPath = mapServerFolder(self.userFilesFolder, currentFolder)
-				i = 0
-				while (True):
-					newFilePath = os.path.join (currentFolderPath,newFileName)
-					if os.path.exists(newFilePath):
-						i += 1
-						newFileName = "%s(%04d).%s" % (
-								newFileNameOnly, i, newFileExtension
-								)
-						errorNo= 201 # file renamed
-					else:
-						# Read file contents and write to the desired path (similar to php's move_uploaded_file)
-						fout = file(newFilePath, 'wb')
-						while (True):
-							chunk = newFile.file.read(100000)
-							if not chunk: break
-							fout.write (chunk)
-						fout.close()
-
-						if os.path.exists ( newFilePath ):
-							doChmod = False
-							try:
-								doChmod = Config.ChmodOnUpload
-								permissions = Config.ChmodOnUpload
-							except AttributeError: #ChmodOnUpload undefined
-								doChmod = True
-								permissions = 0755
-							if ( doChmod ):
-								oldumask = os.umask(0)
-								os.chmod( newFilePath, permissions )
-								os.umask( oldumask )
-
-						newFileUrl = self.webUserFilesFolder + currentFolder + newFileName
-
-						return self.sendUploadResults( errorNo , newFileUrl, newFileName )
-			else:
-				return self.sendUploadResults( errorNo = 203, customMsg = "Extension not allowed" )
-		else:
-			return self.sendUploadResults( errorNo = 202, customMsg = "No File" )