typo 5.2 → 5.2.98

data/vendor/plugins/rspec/lib/spec/matchers/raise_error.rb

@@ -1,132 +0,0 @@
-module Spec
-  module Matchers
-    class RaiseError #:nodoc:
-      def initialize(expected_error_or_message=Exception, expected_message=nil, &block)
-        @block = block
-        case expected_error_or_message
-        when String, Regexp
-          @expected_error, @expected_message = Exception, expected_error_or_message
-        else
-          @expected_error, @expected_message = expected_error_or_message, expected_message
-        end
-      end
-
-      def matches?(given_proc)
-        @raised_expected_error = false
-        @with_expected_message = false
-        @eval_block = false
-        @eval_block_passed = false
-        begin
-          given_proc.call
-        rescue @expected_error => @given_error
-          @raised_expected_error = true
-          @with_expected_message = verify_message
-        rescue Exception => @given_error
-          # This clause should be empty, but rcov will not report it as covered
-          # unless something (anything) is executed within the clause
-          rcov_error_report = "http://eigenclass.org/hiki.rb?rcov-0.8.0"
-        end
-
-        unless negative_expectation?
-          eval_block if @raised_expected_error && @with_expected_message && @block
-        end
-      ensure
-        return (@raised_expected_error && @with_expected_message) ? (@eval_block ? @eval_block_passed : true) : false
-      end
-      
-      def eval_block
-        @eval_block = true
-        begin
-          @block[@given_error]
-          @eval_block_passed = true
-        rescue Exception => err
-          @given_error = err
-        end
-      end
-
-      def verify_message
-        case @expected_message
-        when nil
-          return true
-        when Regexp
-          return @expected_message =~ @given_error.message
-        else
-          return @expected_message == @given_error.message
-        end
-      end
-      
-      def failure_message
-        if @eval_block
-          return @given_error.message
-        else
-          return "expected #{expected_error}#{given_error}"
-        end
-      end
-
-      def negative_failure_message
-        "expected no #{expected_error}#{given_error}"
-      end
-      
-      def description
-        "raise #{expected_error}"
-      end
-      
-      private
-        def expected_error
-          case @expected_message
-          when nil
-            @expected_error
-          when Regexp
-            "#{@expected_error} with message matching #{@expected_message.inspect}"
-          else
-            "#{@expected_error} with #{@expected_message.inspect}"
-          end
-        end
-
-        def given_error
-          @given_error.nil? ? " but nothing was raised" : ", got #{@given_error.inspect}"
-        end
-        
-        def negative_expectation?
-          # YES - I'm a bad person... help me find a better way - ryand
-          caller.first(3).find { |s| s =~ /should_not/ }
-        end
-    end
-    
-    # :call-seq:
-    #   should raise_error()
-    #   should raise_error(NamedError)
-    #   should raise_error(NamedError, String)
-    #   should raise_error(NamedError, Regexp)
-    #   should raise_error() { |error| ... }
-    #   should raise_error(NamedError) { |error| ... }
-    #   should raise_error(NamedError, String) { |error| ... }
-    #   should raise_error(NamedError, Regexp) { |error| ... }
-    #   should_not raise_error()
-    #   should_not raise_error(NamedError)
-    #   should_not raise_error(NamedError, String)
-    #   should_not raise_error(NamedError, Regexp)
-    #
-    # With no args, matches if any error is raised.
-    # With a named error, matches only if that specific error is raised.
-    # With a named error and messsage specified as a String, matches only if both match.
-    # With a named error and messsage specified as a Regexp, matches only if both match.
-    # Pass an optional block to perform extra verifications on the exception matched
-    #
-    # == Examples
-    #
-    #   lambda { do_something_risky }.should raise_error
-    #   lambda { do_something_risky }.should raise_error(PoorRiskDecisionError)
-    #   lambda { do_something_risky }.should raise_error(PoorRiskDecisionError) { |error| error.data.should == 42 }
-    #   lambda { do_something_risky }.should raise_error(PoorRiskDecisionError, "that was too risky")
-    #   lambda { do_something_risky }.should raise_error(PoorRiskDecisionError, /oo ri/)
-    #
-    #   lambda { do_something_risky }.should_not raise_error
-    #   lambda { do_something_risky }.should_not raise_error(PoorRiskDecisionError)
-    #   lambda { do_something_risky }.should_not raise_error(PoorRiskDecisionError, "that was too risky")
-    #   lambda { do_something_risky }.should_not raise_error(PoorRiskDecisionError, /oo ri/)
-    def raise_error(error=Exception, message=nil, &block)
-      Matchers::RaiseError.new(error, message, &block)
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/respond_to.rb

@@ -1,46 +0,0 @@
-module Spec
-  module Matchers
-    
-    class RespondTo #:nodoc:
-      def initialize(*names)
-        @names = names
-        @names_not_responded_to = []
-      end
-      
-      def matches?(given)
-        @given = given
-        @names.each do |name|
-          unless given.respond_to?(name)
-            @names_not_responded_to << name
-          end
-        end
-        return @names_not_responded_to.empty?
-      end
-      
-      def failure_message
-        "expected #{@given.inspect} to respond to #{@names_not_responded_to.collect {|name| name.inspect }.join(', ')}"
-      end
-      
-      def negative_failure_message
-        "expected #{@given.inspect} not to respond to #{@names.collect {|name| name.inspect }.join(', ')}"
-      end
-      
-      def description
-        "respond to ##{@names.to_s}"
-      end
-    end
-    
-    # :call-seq:
-    #   should respond_to(*names)
-    #   should_not respond_to(*names)
-    #
-    # Matches if the target object responds to all of the names
-    # provided. Names can be Strings or Symbols.
-    #
-    # == Examples
-    # 
-    def respond_to(*names)
-      Matchers::RespondTo.new(*names)
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/satisfy.rb

@@ -1,47 +0,0 @@
-module Spec
-  module Matchers
-    
-    class Satisfy #:nodoc:
-      def initialize(&block)
-        @block = block
-      end
-      
-      def matches?(given, &block)
-        @block = block if block
-        @given = given
-        @block.call(given)
-      end
-      
-      def failure_message
-        "expected #{@given} to satisfy block"
-      end
-
-      def negative_failure_message
-        "expected #{@given} not to satisfy block"
-      end
-    end
-    
-    # :call-seq:
-    #   should satisfy {}
-    #   should_not satisfy {}
-    #
-    # Passes if the submitted block returns true. Yields target to the
-    # block.
-    #
-    # Generally speaking, this should be thought of as a last resort when
-    # you can't find any other way to specify the behaviour you wish to
-    # specify.
-    #
-    # If you do find yourself in such a situation, you could always write
-    # a custom matcher, which would likely make your specs more expressive.
-    #
-    # == Examples
-    #
-    #   5.should satisfy { |n|
-    #     n > 3
-    #   }
-    def satisfy(&block)
-      Matchers::Satisfy.new(&block)
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/simple_matcher.rb

@@ -1,132 +0,0 @@
-module Spec
-  module Matchers
-    class SimpleMatcher
-      attr_writer :failure_message, :negative_failure_message, :description
-      
-      def initialize(description, &match_block)
-        @description = description
-        @match_block = match_block
-      end
-
-      def matches?(given)
-        @given = given
-        case @match_block.arity
-        when 2
-          @match_block.call(@given, self)
-        else
-          @match_block.call(@given)
-        end
-      end
-      
-      def description
-        @description || explanation
-      end
-
-      def failure_message
-        @failure_message || (@description.nil? ? explanation : %[expected #{@description.inspect} but got #{@given.inspect}])
-      end
-
-      def negative_failure_message
-        @negative_failure_message || (@description.nil? ? explanation : %[expected not to get #{@description.inspect}, but got #{@given.inspect}])
-      end
-
-      def explanation
-        "No description provided. See RDoc for simple_matcher()"
-      end
-    end
-  
-    # simple_matcher makes it easy for you to create your own custom matchers
-    # in just a few lines of code when you don't need all the power of a
-    # completely custom matcher object.
-    #
-    # The <tt>description</tt> argument will appear as part of any failure
-    # message, and is also the source for auto-generated descriptions.
-    #
-    # The <tt>match_block</tt> can have an arity of 1 or 2. The first block
-    # argument will be the given value. The second, if the block accepts it
-    # will be the matcher itself, giving you access to set custom failure
-    # messages in favor of the defaults.
-    #
-    # The <tt>match_block</tt> should return a boolean: <tt>true</tt>
-    # indicates a match, which will pass if you use <tt>should</tt> and fail
-    # if you use <tt>should_not</tt>. false (or nil) indicates no match,
-    # which will do the reverse: fail if you use <tt>should</tt> and pass if
-    # you use <tt>should_not</tt>.
-    #
-    # An error in the <tt>match_block</tt> will bubble up, resulting in a
-    # failure.
-    #
-    # == Example with default messages
-    #
-    #   def be_even
-    #     simple_matcher("an even number") { |given| given % 2 == 0 }
-    #   end
-    #                    
-    #   describe 2 do
-    #     it "should be even" do
-    #       2.should be_even
-    #     end
-    #   end
-    #
-    # Given an odd number, this example would produce an error message stating:
-    # expected "an even number", got 3.
-    #
-    # Unfortunately, if you're a fan of auto-generated descriptions, this will
-    # produce "should an even number." Not the most desirable result. You can
-    # control that using custom messages:
-    #
-    # == Example with custom messages
-    #
-    #   def rhyme_with(expected)
-    #     simple_matcher("rhyme with #{expected.inspect}") do |given, matcher|
-    #       matcher.failure_message = "expected #{given.inspect} to rhyme with #{expected.inspect}"
-    #       matcher.negative_failure_message = "expected #{given.inspect} not to rhyme with #{expected.inspect}"
-    #       given.rhymes_with? expected
-    #     end
-    #   end
-    #
-    #   # OR
-    #
-    #   def rhyme_with(expected)
-    #     simple_matcher do |given, matcher|
-    #       matcher.description = "rhyme with #{expected.inspect}"
-    #       matcher.failure_message = "expected #{given.inspect} to rhyme with #{expected.inspect}"
-    #       matcher.negative_failure_message = "expected #{given.inspect} not to rhyme with #{expected.inspect}"
-    #       given.rhymes_with? expected
-    #     end
-    #   end
-    #
-    #   describe "pecan" do
-    #     it "should rhyme with 'be gone'" do
-    #       nut = "pecan"
-    #       nut.extend Rhymer
-    #       nut.should rhyme_with("be gone")
-    #     end
-    #   end
-    #
-    # The resulting messages would be:
-    #   description:              rhyme with "be gone"
-    #   failure_message:          expected "pecan" to rhyme with "be gone"
-    #   negative failure_message: expected "pecan" not to rhyme with "be gone"
-    #
-    # == Wrapped Expectations
-    #
-    # Because errors will bubble up, it is possible to wrap other expectations
-    # in a SimpleMatcher.
-    #
-    #   def be_even
-    #     simple_matcher("an even number") { |given| (given % 2).should == 0 }
-    #   end
-    #
-    # BE VERY CAREFUL when you do this. Only use wrapped expectations for
-    # matchers that will always be used in only the positive
-    # (<tt>should</tt>) or negative (<tt>should_not</tt>), but not both.
-    # The reason is that is you wrap a <tt>should</tt> and call the wrapper
-    # with <tt>should_not</tt>, the correct result (the <tt>should</tt>
-    # failing), will fail when you want it to pass.
-    #
-    def simple_matcher(description=nil, &match_block)
-      SimpleMatcher.new(description, &match_block)
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/matchers/throw_symbol.rb

@@ -1,74 +0,0 @@
-module Spec
-  module Matchers
-    
-    class ThrowSymbol #:nodoc:
-      def initialize(expected=nil)
-        @expected = expected
-        @actual = nil
-      end
-      
-      def matches?(given_proc)
-        begin
-          given_proc.call
-        rescue NameError => e
-          raise e unless e.message =~ /uncaught throw/
-          @actual = e.name.to_sym
-        ensure
-          if @expected.nil?
-            return @actual.nil? ? false : true
-          else
-            return @actual == @expected
-          end
-        end
-      end
-
-      def failure_message
-        if @actual
-          "expected #{expected}, got #{@actual.inspect}"
-        else
-          "expected #{expected} but nothing was thrown"
-        end
-      end
-      
-      def negative_failure_message
-        if @expected
-          "expected #{expected} not to be thrown"
-        else
-          "expected no Symbol, got :#{@actual}"
-        end
-      end
-      
-      def description
-        "throw #{expected}"
-      end
-      
-      private
-      
-        def expected
-          @expected.nil? ? "a Symbol" : @expected.inspect
-        end
-      
-    end
- 
-    # :call-seq:
-    #   should throw_symbol()
-    #   should throw_symbol(:sym)
-    #   should_not throw_symbol()
-    #   should_not throw_symbol(:sym)
-    #
-    # Given a Symbol argument, matches if the given proc throws the specified Symbol.
-    #
-    # Given no argument, matches if a proc throws any Symbol.
-    #
-    # == Examples
-    #
-    #   lambda { do_something_risky }.should throw_symbol
-    #   lambda { do_something_risky }.should throw_symbol(:that_was_risky)
-    #
-    #   lambda { do_something_risky }.should_not throw_symbol
-    #   lambda { do_something_risky }.should_not throw_symbol(:that_was_risky)
-    def throw_symbol(sym=nil)
-      Matchers::ThrowSymbol.new(sym)
-    end
-  end
-end

data/vendor/plugins/rspec/lib/spec/mocks.rb

@@ -1,200 +0,0 @@
-require 'spec/mocks/framework'
-require 'spec/mocks/extensions/object'
-
-module Spec
-  # == Mocks and Stubs
-  #
-  # RSpec will create Mock Objects and Stubs for you at runtime, or attach stub/mock behaviour
-  # to any of your real objects (Partial Mock/Stub). Because the underlying implementation
-  # for mocks and stubs is the same, you can intermingle mock and stub
-  # behaviour in either dynamically generated mocks or your pre-existing classes.
-  # There is a semantic difference in how they are created, however,
-  # which can help clarify the role it is playing within a given spec.
-  #
-  # == Mock Objects
-  # 
-  # Mocks are objects that allow you to set and verify expectations that they will
-  # receive specific messages during run time. They are very useful for specifying how the subject of
-  # the spec interacts with its collaborators. This approach is widely known as "interaction
-  # testing".
-  # 
-  # Mocks are also very powerful as a design tool. As you are
-  # driving the implementation of a given class, Mocks provide an anonymous
-  # collaborator that can change in behaviour as quickly as you can write an expectation in your
-  # spec. This flexibility allows you to design the interface of a collaborator that often
-  # does not yet exist. As the shape of the class being specified becomes more clear, so do the
-  # requirements for its collaborators - often leading to the discovery of new types that are
-  # needed in your system.
-  # 
-  # Read Endo-Testing[http://www.mockobjects.com/files/endotesting.pdf] for a much
-  # more in depth description of this process.
-  # 
-  # == Stubs
-  # 
-  # Stubs are objects that allow you to set "stub" responses to
-  # messages. As Martin Fowler points out on his site,
-  # mocks_arent_stubs[http://www.martinfowler.com/articles/mocksArentStubs.html].
-  # Paraphrasing Fowler's paraphrasing
-  # of Gerard Meszaros: Stubs provide canned responses to messages they might receive in a test, while
-  # mocks allow you to specify and, subsquently, verify that certain messages should be received during
-  # the execution of a test.
-  # 
-  # == Partial Mocks/Stubs
-  # 
-  # RSpec also supports partial mocking/stubbing, allowing you to add stub/mock behaviour
-  # to instances of your existing classes. This is generally
-  # something to be avoided, because changes to the class can have ripple effects on
-  # seemingly unrelated specs. When specs fail due to these ripple effects, the fact
-  # that some methods are being mocked can make it difficult to understand why a
-  # failure is occurring.
-  # 
-  # That said, partials do allow you to expect and
-  # verify interactions with class methods such as +#find+ and +#create+
-  # on Ruby on Rails model classes.
-  # 
-  # == Further Reading
-  # 
-  # There are many different viewpoints about the meaning of mocks and stubs. If you are interested
-  # in learning more, here is some recommended reading:
-  # 
-  # * Mock Objects: http://www.mockobjects.com/
-  # * Endo-Testing: http://www.mockobjects.com/files/endotesting.pdf
-  # * Mock Roles, Not Objects: http://www.mockobjects.com/files/mockrolesnotobjects.pdf
-  # * Test Double Patterns: http://xunitpatterns.com/Test%20Double%20Patterns.html
-  # * Mocks aren't stubs: http://www.martinfowler.com/articles/mocksArentStubs.html
-  #
-  # == Creating a Mock
-  #
-  # You can create a mock in any specification (or setup) using:
-  #
-  #   mock(name, options={})
-  #
-  # The optional +options+ argument is a +Hash+. Currently the only supported
-  # option is +:null_object+. Setting this to true instructs the mock to ignore
-  # any messages it hasn’t been told to expect – and quietly return itself. For example:
-  #
-  #   mock("person", :null_object => true)
-  #
-  # == Creating a Stub
-  #
-  # You can create a stub in any specification (or setup) using:
-  #
-  #   stub(name, stub_methods_and_values_hash)
-  #
-  # For example, if you wanted to create an object that always returns
-  # "More?!?!?!" to "please_sir_may_i_have_some_more" you would do this:
-  #
-  #   stub("Mr Sykes", :please_sir_may_i_have_some_more => "More?!?!?!")
-  #
-  # == Creating a Partial Mock
-  #
-  # You don't really "create" a partial mock, you simply add method stubs and/or
-  # mock expectations to existing classes and objects:
-  #
-  #   Factory.should_receive(:find).with(id).and_return(value)
-  #   obj.stub!(:to_i).and_return(3)
-  #   etc ...
-  #
-  # == Expecting Messages
-  #
-  #   my_mock.should_receive(:sym)
-  #   my_mock.should_not_receive(:sym)
-  #   
-  # == Expecting Arguments
-  #
-  #   my_mock.should_receive(:sym).with(*args)
-  #   my_mock.should_not_receive(:sym).with(*args)
-  #
-  # == Argument Constraints using Expression Matchers
-  #
-  # Arguments that are passed to #with are compared with actual arguments received
-  # using == by default. In cases in which you want to specify things about the arguments
-  # rather than the arguments themselves, you can use any of the Expression Matchers.
-  # They don't all make syntactic sense (they were primarily designed for use with
-  # Spec::Expectations), but you are free to create your own custom Spec::Matchers.
-  #
-  # Spec::Mocks does provide one additional Matcher method named #ducktype.
-  #
-  # In addition, Spec::Mocks adds some keyword Symbols that you can use to
-  # specify certain kinds of arguments:
-  #
-  #   my_mock.should_receive(:sym).with(no_args())
-  #   my_mock.should_receive(:sym).with(any_args())
-  #   my_mock.should_receive(:sym).with(1, an_instance_of(Numeric), "b") #2nd argument can any type of Numeric
-  #   my_mock.should_receive(:sym).with(1, boolean(), "b") #2nd argument can true or false
-  #   my_mock.should_receive(:sym).with(1, /abc/, "b") #2nd argument can be any String matching the submitted Regexp
-  #   my_mock.should_receive(:sym).with(1, anything(), "b") #2nd argument can be anything at all
-  #   my_mock.should_receive(:sym).with(1, ducktype(:abs, :div), "b")
-  #                            #2nd argument can be object that responds to #abs and #div
-  #                                                                       
-  # == Receive Counts
-  #
-  #   my_mock.should_receive(:sym).once
-  #   my_mock.should_receive(:sym).twice
-  #   my_mock.should_receive(:sym).exactly(n).times
-  #   my_mock.should_receive(:sym).at_least(:once)
-  #   my_mock.should_receive(:sym).at_least(:twice)
-  #   my_mock.should_receive(:sym).at_least(n).times
-  #   my_mock.should_receive(:sym).at_most(:once)
-  #   my_mock.should_receive(:sym).at_most(:twice)
-  #   my_mock.should_receive(:sym).at_most(n).times
-  #   my_mock.should_receive(:sym).any_number_of_times
-  #
-  # == Ordering
-  #
-  #   my_mock.should_receive(:sym).ordered
-  #   my_mock.should_receive(:other_sym).ordered
-  #     #This will fail if the messages are received out of order
-  #
-  # == Setting Reponses
-  #
-  # Whether you are setting a mock expectation or a simple stub, you can tell the
-  # object precisely how to respond:
-  #
-  #   my_mock.should_receive(:sym).and_return(value)
-  #   my_mock.should_receive(:sym).exactly(3).times.and_return(value1, value2, value3)
-  #     # returns value1 the first time, value2 the second, etc
-  #   my_mock.should_receive(:sym).and_return { ... } #returns value returned by the block
-  #   my_mock.should_receive(:sym).and_raise(error)
-  #     #error can be an instantiated object or a class
-  #     #if it is a class, it must be instantiable with no args
-  #   my_mock.should_receive(:sym).and_throw(:sym)
-  #   my_mock.should_receive(:sym).and_yield(values,to,yield)
-  #   my_mock.should_receive(:sym).and_yield(values,to,yield).and_yield(some,other,values,this,time)
-  #     # for methods that yield to a block multiple times
-  #
-  # Any of these responses can be applied to a stub as well, but stubs do
-  # not support any qualifiers about the message received (i.e. you can't specify arguments
-  # or receive counts):
-  #
-  #   my_mock.stub!(:sym).and_return(value)
-  #   my_mock.stub!(:sym).and_return(value1, value2, value3)
-  #   my_mock.stub!(:sym).and_raise(error)
-  #   my_mock.stub!(:sym).and_throw(:sym)
-  #   my_mock.stub!(:sym).and_yield(values,to,yield)
-  #   my_mock.stub!(:sym).and_yield(values,to,yield).and_yield(some,other,values,this,time)
-  #
-  # == Arbitrary Handling
-  #
-  # Once in a while you'll find that the available expectations don't solve the
-  # particular problem you are trying to solve. Imagine that you expect the message
-  # to come with an Array argument that has a specific length, but you don't care
-  # what is in it. You could do this:
-  #
-  #   my_mock.should_receive(:sym) do |arg|
-  #     arg.should be_an_istance_of(Array)
-  #     arg.length.should == 7
-  #   end
-  #
-  # Note that this would fail if the number of arguments received was different from
-  # the number of block arguments (in this case 1).
-  #
-  # == Combining Expectation Details
-  #
-  # Combining the message name with specific arguments, receive counts and responses
-  # you can get quite a bit of detail in your expectations:
-  #
-  #   my_mock.should_receive(:<<).with("illegal value").once.and_raise(ArgumentError)
-  module Mocks
-  end
-end