txtblx 0.0.1

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,41 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,79 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like
+  # NGINX, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
+  # yet still be able to expire them through the digest params.
+  config.assets.digest = true
+
+  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,42 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static file server for tests with Cache-Control for performance.
+  config.serve_static_files   = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Randomize the order test cases are executed.
+  config.active_support.test_order = :random
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,11 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+# Rails.application.config.assets.precompile += %w( search.js )

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/spec/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/spec/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/spec/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/spec/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/spec/dummy/config/routes.rb

@@ -0,0 +1,6 @@
+Rails.application.routes.draw do
+
+  mount Txtblx::Engine => "/txtblx"
+
+  root to: 'dummies#index'
+end

data/spec/dummy/config/secrets.yml

@@ -0,0 +1,22 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+development:
+  secret_key_base: c8e31339ffe0332a8a91a8ead6bcde55c385b716f366fdf16d871bad4dbd800369a59b5af6046a41f9df9bd8ec2f370c98c1b2af4a58af7a6be88324d9b2ef94
+
+test:
+  secret_key_base: 2a8686f7f0b5725c0ceff2ccfe949eca1c81d68f7420fdf158a3d08fe84e95860aebb07101723e3b098bb4fbde8db5e1d5e820b9c234e7ef3692b5c98a580689
+
+# Do not keep production secrets in the repository,
+# instead read values from the environment.
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/spec/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment', __FILE__)
+run Rails.application

data/spec/dummy/db/migrate/20150406173449_create_snaps_tags.snaps.rb

@@ -0,0 +1,13 @@
+# This migration comes from snaps (originally 20150321131740)
+class CreateSnapsTags < ActiveRecord::Migration
+  def change
+    create_table :snaps_tags do |t|
+      t.integer :record_id
+      t.string :record_type
+      t.string :tag
+      t.timestamp :superseded_at
+
+      t.timestamps null: false
+    end
+  end
+end

data/spec/dummy/db/schema.rb

@@ -0,0 +1,36 @@
+# encoding: UTF-8
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended that you check this file into your version control system.
+
+ActiveRecord::Schema.define(version: 20150405222157) do
+
+  create_table "snaps_tags", force: :cascade do |t|
+    t.integer  "record_id"
+    t.string   "record_type"
+    t.string   "tag"
+    t.datetime "superseded_at"
+    t.datetime "created_at",    null: false
+    t.datetime "updated_at",    null: false
+  end
+
+  create_table "txtblx_textblocks", force: :cascade do |t|
+    t.integer  "perma_id"
+    t.string   "key"
+    t.string   "description"
+    t.text     "text"
+    t.text     "text_html"
+    t.string   "path"
+    t.datetime "created_at",  null: false
+    t.datetime "updated_at",  null: false
+  end
+
+end

data/spec/dummy/log/development.log

@@ -0,0 +1,25 @@
+   (25.8ms)  CREATE TABLE "schema_migrations" ("version" varchar NOT NULL) 
+   (0.2ms)  select sqlite_version(*)
+   (32.5ms)  CREATE UNIQUE INDEX "unique_schema_migrations" ON "schema_migrations" ("version")
+  ActiveRecord::SchemaMigration Load (0.1ms)  SELECT "schema_migrations".* FROM "schema_migrations"
+Migrating to CreateSnapsTags (20150321131740)
+   (0.1ms)  begin transaction
+   (0.4ms)  CREATE TABLE "snaps_tags" ("id" INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL, "record_id" integer, "record_type" varchar, "tag" varchar, "superseded_at" datetime, "created_at" datetime NOT NULL, "updated_at" datetime NOT NULL) 
+  SQL (0.1ms)  INSERT INTO "schema_migrations" ("version") VALUES (?)  [["version", "20150321131740"]]
+   (38.4ms)  commit transaction
+  ActiveRecord::SchemaMigration Load (0.1ms)  SELECT "schema_migrations".* FROM "schema_migrations"
+  ActiveRecord::SchemaMigration Load (0.1ms)  SELECT "schema_migrations".* FROM "schema_migrations"
+Migrating to CreateTxtblxTextblocks (20150405222157)
+   (0.1ms)  begin transaction
+   (0.3ms)  CREATE TABLE "txtblx_textblocks" ("id" INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL, "perma_id" integer, "key" varchar, "description" varchar, "text" text, "text_html" text, "path" varchar, "created_at" datetime NOT NULL, "updated_at" datetime NOT NULL) 
+  SQL (0.1ms)  INSERT INTO "schema_migrations" ("version") VALUES (?)  [["version", "20150405222157"]]
+   (31.2ms)  commit transaction
+  ActiveRecord::SchemaMigration Load (0.1ms)  SELECT "schema_migrations".* FROM "schema_migrations"
+  ActiveRecord::SchemaMigration Load (0.1ms)  SELECT "schema_migrations".* FROM "schema_migrations"
+  ActiveRecord::SchemaMigration Load (0.1ms)  SELECT "schema_migrations".* FROM "schema_migrations"
+  ActiveRecord::SchemaMigration Load (0.1ms)  SELECT "schema_migrations".* FROM "schema_migrations"
+Migrating to CreateSnapsTags (20150406173449)
+   (0.1ms)  begin transaction
+   (0.1ms)  CREATE TABLE "snaps_tags" ("id" INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL, "record_id" integer, "record_type" varchar, "tag" varchar, "superseded_at" datetime, "created_at" datetime NOT NULL, "updated_at" datetime NOT NULL) 
+SQLite3::SQLException: table "snaps_tags" already exists: CREATE TABLE "snaps_tags" ("id" INTEGER PRIMARY KEY AUTOINCREMENT NOT NULL, "record_id" integer, "record_type" varchar, "tag" varchar, "superseded_at" datetime, "created_at" datetime NOT NULL, "updated_at" datetime NOT NULL) 
+   (0.0ms)  rollback transaction