tripletex_api3 1.0.3

data/lib/tripletex_api/models/document.rb

@@ -0,0 +1,285 @@
+=begin
+#Tripletex API
+
+#The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields.  **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`.  **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>.  **\"requestID\"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value.  **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/sveredyuk/tripletex_ruby). This document was generated from the Swagger JSON file.  **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET.  **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ`  **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`.  **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like.  **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization.  **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.**   ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**.  - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed.  - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab \"API access\". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0)  - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in \"Basic Authentication Header\" for API calls.  - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>.  - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts.  - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>.   ## Tags: - <div class=\"tag-icon-beta\"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class=\"tag-icon-deprecated\"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future \"major\" API release. We therefore discourage all use of this feature/capability.  ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours`  returns `{project:..., activity:...., hours:...}`. - just `project` returns `\"project\" : { \"id\": 12345, \"url\": \"tripletex.no/v2/projects/12345\"  }`. - `project(*)` returns `\"project\" : { \"id\": 12345 \"name\":\"ProjectName\" \"number.....startDate\": \"2013-01-07\" }`. - `project(name)` returns `\"project\" : { \"name\":\"ProjectName\" }`. - All elements and some subElements :  `*,activity(name),employee(*)`.  ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available:  - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated  NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation).  ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period.  Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period.   ## Response envelope: ``` {   \"fullResultSize\": ###,   \"from\": ###, // Paging starting from   \"count\": ###, // Paging count   \"versionDigest\": \"Hash of full result\",   \"values\": [...list of objects...] } {   \"value\": {...single object...} } ```   ## WebHook envelope: ``` {   \"subscriptionId\": ###,   \"event\": \"object.verb\", // As listed from /v2/event/   \"id\": ###, // Object id   \"value\": {... single object, null if object.deleted ...} } ```    ## Error/warning envelope: ``` {   \"status\": ###, // HTTP status code   \"code\": #####, // internal status code of event   \"message\": \"Basic feedback message in your language\",   \"link\": \"Link to doc\",   \"developerMessage\": \"More technical message\",   \"validationMessages\": [ // Will be null if Error     {       \"field\": \"Name of field\",       \"message\": \"Validation failure information\"     }   ],   \"requestId\": \"UUID used in any logs\" } ```   ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: \"/:anAction\" or DELETE. - **400 Bad request** -   - **4000** Bad Request Exception   - **11000** Illegal Filter Exception   - **12000** Path Param Exception   - **24000**   Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided   -  **3000** Authentication Exception   -  **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist.   -  **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates   -  **7000** Object Exists Exception   -  **8000** Revision Exception   - **10000** Locked Exception   - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload.   - **15000** Value Validation Exception   - **16000** Mapping Exception   - **17000** Sorting Exception   - **18000** Validation Exception   - **21000** Param Exception   - **22000** Invalid JSON Exception   - **23000**   Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** -  Unexpected condition was encountered and no more specific message is suitable   -  **1000** Exception
+
+OpenAPI spec version: 2.32.0
+
+Generated by: https://github.com/sveredyuk/tripletex_ruby.git
+Swagger Codegen version: 2.3.1
+
+=end
+
+require 'date'
+
+module TripletexApi
+
+  class Document
+    attr_accessor :id
+
+    attr_accessor :version
+
+    attr_accessor :changes
+
+    attr_accessor :url
+
+    # The name of the document.
+    attr_accessor :file_name
+
+    # The size of the document in bytes.
+    attr_accessor :size
+
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'id' => :'id',
+        :'version' => :'version',
+        :'changes' => :'changes',
+        :'url' => :'url',
+        :'file_name' => :'fileName',
+        :'size' => :'size'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'id' => :'Integer',
+        :'version' => :'Integer',
+        :'changes' => :'Array<Change>',
+        :'url' => :'String',
+        :'file_name' => :'String',
+        :'size' => :'Integer'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}){|(k,v), h| h[k.to_sym] = v}
+
+      if attributes.has_key?(:'id')
+        self.id = attributes[:'id']
+      end
+
+      if attributes.has_key?(:'version')
+        self.version = attributes[:'version']
+      end
+
+      if attributes.has_key?(:'changes')
+        if (value = attributes[:'changes']).is_a?(Array)
+          self.changes = value
+        end
+      end
+
+      if attributes.has_key?(:'url')
+        self.url = attributes[:'url']
+      end
+
+      if attributes.has_key?(:'fileName')
+        self.file_name = attributes[:'fileName']
+      end
+
+      if attributes.has_key?(:'size')
+        self.size = attributes[:'size']
+      end
+
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @file_name.nil?
+        invalid_properties.push("invalid value for 'file_name', file_name cannot be nil.")
+      end
+
+      if @file_name.to_s.length > 255
+        invalid_properties.push("invalid value for 'file_name', the character length must be smaller than or equal to 255.")
+      end
+
+      if @size.nil?
+        invalid_properties.push("invalid value for 'size', size cannot be nil.")
+      end
+
+      if @size < 0
+        invalid_properties.push("invalid value for 'size', must be greater than or equal to 0.")
+      end
+
+      return invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @file_name.nil?
+      return false if @file_name.to_s.length > 255
+      return false if @size.nil?
+      return false if @size < 0
+      return true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] file_name Value to be assigned
+    def file_name=(file_name)
+      if file_name.nil?
+        fail ArgumentError, "file_name cannot be nil"
+      end
+
+      if file_name.to_s.length > 255
+        fail ArgumentError, "invalid value for 'file_name', the character length must be smaller than or equal to 255."
+      end
+
+      @file_name = file_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] size Value to be assigned
+    def size=(size)
+      if size.nil?
+        fail ArgumentError, "size cannot be nil"
+      end
+
+      if size < 0
+        fail ArgumentError, "invalid value for 'size', must be greater than or equal to 0."
+      end
+
+      @size = size
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          id == o.id &&
+          version == o.version &&
+          changes == o.changes &&
+          url == o.url &&
+          file_name == o.file_name &&
+          size == o.size
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [id, version, changes, url, file_name, size].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map{ |v| _deserialize($1, v) } )
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = TripletexApi.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map{ |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/tripletex_api/models/employee.rb

@@ -0,0 +1,609 @@
+=begin
+#Tripletex API
+
+#The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields.  **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`.  **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>.  **\"requestID\"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value.  **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/sveredyuk/tripletex_ruby). This document was generated from the Swagger JSON file.  **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET.  **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ`  **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`.  **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like.  **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization.  **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.**   ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**.  - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed.  - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab \"API access\". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0)  - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in \"Basic Authentication Header\" for API calls.  - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>.  - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts.  - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>.   ## Tags: - <div class=\"tag-icon-beta\"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class=\"tag-icon-deprecated\"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future \"major\" API release. We therefore discourage all use of this feature/capability.  ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours`  returns `{project:..., activity:...., hours:...}`. - just `project` returns `\"project\" : { \"id\": 12345, \"url\": \"tripletex.no/v2/projects/12345\"  }`. - `project(*)` returns `\"project\" : { \"id\": 12345 \"name\":\"ProjectName\" \"number.....startDate\": \"2013-01-07\" }`. - `project(name)` returns `\"project\" : { \"name\":\"ProjectName\" }`. - All elements and some subElements :  `*,activity(name),employee(*)`.  ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available:  - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated  NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation).  ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period.  Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period.   ## Response envelope: ``` {   \"fullResultSize\": ###,   \"from\": ###, // Paging starting from   \"count\": ###, // Paging count   \"versionDigest\": \"Hash of full result\",   \"values\": [...list of objects...] } {   \"value\": {...single object...} } ```   ## WebHook envelope: ``` {   \"subscriptionId\": ###,   \"event\": \"object.verb\", // As listed from /v2/event/   \"id\": ###, // Object id   \"value\": {... single object, null if object.deleted ...} } ```    ## Error/warning envelope: ``` {   \"status\": ###, // HTTP status code   \"code\": #####, // internal status code of event   \"message\": \"Basic feedback message in your language\",   \"link\": \"Link to doc\",   \"developerMessage\": \"More technical message\",   \"validationMessages\": [ // Will be null if Error     {       \"field\": \"Name of field\",       \"message\": \"Validation failure information\"     }   ],   \"requestId\": \"UUID used in any logs\" } ```   ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: \"/:anAction\" or DELETE. - **400 Bad request** -   - **4000** Bad Request Exception   - **11000** Illegal Filter Exception   - **12000** Path Param Exception   - **24000**   Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided   -  **3000** Authentication Exception   -  **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist.   -  **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates   -  **7000** Object Exists Exception   -  **8000** Revision Exception   - **10000** Locked Exception   - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload.   - **15000** Value Validation Exception   - **16000** Mapping Exception   - **17000** Sorting Exception   - **18000** Validation Exception   - **21000** Param Exception   - **22000** Invalid JSON Exception   - **23000**   Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** -  Unexpected condition was encountered and no more specific message is suitable   -  **1000** Exception
+
+OpenAPI spec version: 2.32.0
+
+Generated by: https://github.com/sveredyuk/tripletex_ruby.git
+Swagger Codegen version: 2.3.1
+
+=end
+
+require 'date'
+
+module TripletexApi
+
+  class Employee
+    attr_accessor :id
+
+    attr_accessor :version
+
+    attr_accessor :changes
+
+    attr_accessor :url
+
+    attr_accessor :first_name
+
+    attr_accessor :last_name
+
+    attr_accessor :employee_number
+
+    attr_accessor :date_of_birth
+
+    attr_accessor :email
+
+    attr_accessor :phone_number_mobile
+
+    attr_accessor :phone_number_home
+
+    attr_accessor :national_identity_number
+
+    attr_accessor :dnumber
+
+    attr_accessor :international_id
+
+    attr_accessor :bank_account_number
+
+    # Define the employee's user type.<br>STANDARD: Reduced access. Users with limited system entitlements.<br>EXTENDED: Users can be given all system entitlements.<br>NO_ACCESS: User with no log on access.<br>Users with access to Tripletex must confirm the email address.
+    attr_accessor :user_type
+
+    # Determines if salary information can be registered on the user including hours, travel expenses and employee expenses. The user may also be selected as a project member on projects.
+    attr_accessor :allow_information_registration
+
+    attr_accessor :is_contact
+
+    attr_accessor :comments
+
+    # Address tied to the employee
+    attr_accessor :address
+
+    attr_accessor :department
+
+    # Employments tied to the employee
+    attr_accessor :employments
+
+    class EnumAttributeValidator
+      attr_reader :datatype
+      attr_reader :allowable_values
+
+      def initialize(datatype, allowable_values)
+        @allowable_values = allowable_values.map do |value|
+          case datatype.to_s
+          when /Integer/i
+            value.to_i
+          when /Float/i
+            value.to_f
+          else
+            value
+          end
+        end
+      end
+
+      def valid?(value)
+        !value || allowable_values.include?(value)
+      end
+    end
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'id' => :'id',
+        :'version' => :'version',
+        :'changes' => :'changes',
+        :'url' => :'url',
+        :'first_name' => :'firstName',
+        :'last_name' => :'lastName',
+        :'employee_number' => :'employeeNumber',
+        :'date_of_birth' => :'dateOfBirth',
+        :'email' => :'email',
+        :'phone_number_mobile' => :'phoneNumberMobile',
+        :'phone_number_home' => :'phoneNumberHome',
+        :'national_identity_number' => :'nationalIdentityNumber',
+        :'dnumber' => :'dnumber',
+        :'international_id' => :'internationalId',
+        :'bank_account_number' => :'bankAccountNumber',
+        :'user_type' => :'userType',
+        :'allow_information_registration' => :'allowInformationRegistration',
+        :'is_contact' => :'isContact',
+        :'comments' => :'comments',
+        :'address' => :'address',
+        :'department' => :'department',
+        :'employments' => :'employments'
+      }
+    end
+
+    # Attribute type mapping.
+    def self.swagger_types
+      {
+        :'id' => :'Integer',
+        :'version' => :'Integer',
+        :'changes' => :'Array<Change>',
+        :'url' => :'String',
+        :'first_name' => :'String',
+        :'last_name' => :'String',
+        :'employee_number' => :'String',
+        :'date_of_birth' => :'String',
+        :'email' => :'String',
+        :'phone_number_mobile' => :'String',
+        :'phone_number_home' => :'String',
+        :'national_identity_number' => :'String',
+        :'dnumber' => :'String',
+        :'international_id' => :'InternationalId',
+        :'bank_account_number' => :'String',
+        :'user_type' => :'String',
+        :'allow_information_registration' => :'BOOLEAN',
+        :'is_contact' => :'BOOLEAN',
+        :'comments' => :'String',
+        :'address' => :'Address',
+        :'department' => :'Department',
+        :'employments' => :'Array<Employment>'
+      }
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      return unless attributes.is_a?(Hash)
+
+      # convert string to symbol for hash key
+      attributes = attributes.each_with_object({}){|(k,v), h| h[k.to_sym] = v}
+
+      if attributes.has_key?(:'id')
+        self.id = attributes[:'id']
+      end
+
+      if attributes.has_key?(:'version')
+        self.version = attributes[:'version']
+      end
+
+      if attributes.has_key?(:'changes')
+        if (value = attributes[:'changes']).is_a?(Array)
+          self.changes = value
+        end
+      end
+
+      if attributes.has_key?(:'url')
+        self.url = attributes[:'url']
+      end
+
+      if attributes.has_key?(:'firstName')
+        self.first_name = attributes[:'firstName']
+      end
+
+      if attributes.has_key?(:'lastName')
+        self.last_name = attributes[:'lastName']
+      end
+
+      if attributes.has_key?(:'employeeNumber')
+        self.employee_number = attributes[:'employeeNumber']
+      end
+
+      if attributes.has_key?(:'dateOfBirth')
+        self.date_of_birth = attributes[:'dateOfBirth']
+      end
+
+      if attributes.has_key?(:'email')
+        self.email = attributes[:'email']
+      end
+
+      if attributes.has_key?(:'phoneNumberMobile')
+        self.phone_number_mobile = attributes[:'phoneNumberMobile']
+      end
+
+      if attributes.has_key?(:'phoneNumberHome')
+        self.phone_number_home = attributes[:'phoneNumberHome']
+      end
+
+      if attributes.has_key?(:'nationalIdentityNumber')
+        self.national_identity_number = attributes[:'nationalIdentityNumber']
+      end
+
+      if attributes.has_key?(:'dnumber')
+        self.dnumber = attributes[:'dnumber']
+      end
+
+      if attributes.has_key?(:'internationalId')
+        self.international_id = attributes[:'internationalId']
+      end
+
+      if attributes.has_key?(:'bankAccountNumber')
+        self.bank_account_number = attributes[:'bankAccountNumber']
+      end
+
+      if attributes.has_key?(:'userType')
+        self.user_type = attributes[:'userType']
+      end
+
+      if attributes.has_key?(:'allowInformationRegistration')
+        self.allow_information_registration = attributes[:'allowInformationRegistration']
+      else
+        self.allow_information_registration = false
+      end
+
+      if attributes.has_key?(:'isContact')
+        self.is_contact = attributes[:'isContact']
+      else
+        self.is_contact = false
+      end
+
+      if attributes.has_key?(:'comments')
+        self.comments = attributes[:'comments']
+      end
+
+      if attributes.has_key?(:'address')
+        self.address = attributes[:'address']
+      end
+
+      if attributes.has_key?(:'department')
+        self.department = attributes[:'department']
+      end
+
+      if attributes.has_key?(:'employments')
+        if (value = attributes[:'employments']).is_a?(Array)
+          self.employments = value
+        end
+      end
+
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      if @first_name.nil?
+        invalid_properties.push("invalid value for 'first_name', first_name cannot be nil.")
+      end
+
+      if @first_name.to_s.length > 100
+        invalid_properties.push("invalid value for 'first_name', the character length must be smaller than or equal to 100.")
+      end
+
+      if @first_name.to_s.length < 1
+        invalid_properties.push("invalid value for 'first_name', the character length must be great than or equal to 1.")
+      end
+
+      if @last_name.nil?
+        invalid_properties.push("invalid value for 'last_name', last_name cannot be nil.")
+      end
+
+      if @last_name.to_s.length > 100
+        invalid_properties.push("invalid value for 'last_name', the character length must be smaller than or equal to 100.")
+      end
+
+      if @last_name.to_s.length < 1
+        invalid_properties.push("invalid value for 'last_name', the character length must be great than or equal to 1.")
+      end
+
+      if !@employee_number.nil? && @employee_number.to_s.length > 100
+        invalid_properties.push("invalid value for 'employee_number', the character length must be smaller than or equal to 100.")
+      end
+
+      if !@employee_number.nil? && @employee_number.to_s.length < 0
+        invalid_properties.push("invalid value for 'employee_number', the character length must be great than or equal to 0.")
+      end
+
+      if !@email.nil? && @email.to_s.length > 100
+        invalid_properties.push("invalid value for 'email', the character length must be smaller than or equal to 100.")
+      end
+
+      if !@phone_number_mobile.nil? && @phone_number_mobile.to_s.length > 100
+        invalid_properties.push("invalid value for 'phone_number_mobile', the character length must be smaller than or equal to 100.")
+      end
+
+      if !@phone_number_home.nil? && @phone_number_home.to_s.length > 100
+        invalid_properties.push("invalid value for 'phone_number_home', the character length must be smaller than or equal to 100.")
+      end
+
+      if !@national_identity_number.nil? && @national_identity_number.to_s.length > 100
+        invalid_properties.push("invalid value for 'national_identity_number', the character length must be smaller than or equal to 100.")
+      end
+
+      if !@dnumber.nil? && @dnumber.to_s.length > 11
+        invalid_properties.push("invalid value for 'dnumber', the character length must be smaller than or equal to 11.")
+      end
+
+      if !@bank_account_number.nil? && @bank_account_number.to_s.length > 100
+        invalid_properties.push("invalid value for 'bank_account_number', the character length must be smaller than or equal to 100.")
+      end
+
+      return invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      return false if @first_name.nil?
+      return false if @first_name.to_s.length > 100
+      return false if @first_name.to_s.length < 1
+      return false if @last_name.nil?
+      return false if @last_name.to_s.length > 100
+      return false if @last_name.to_s.length < 1
+      return false if !@employee_number.nil? && @employee_number.to_s.length > 100
+      return false if !@employee_number.nil? && @employee_number.to_s.length < 0
+      return false if !@email.nil? && @email.to_s.length > 100
+      return false if !@phone_number_mobile.nil? && @phone_number_mobile.to_s.length > 100
+      return false if !@phone_number_home.nil? && @phone_number_home.to_s.length > 100
+      return false if !@national_identity_number.nil? && @national_identity_number.to_s.length > 100
+      return false if !@dnumber.nil? && @dnumber.to_s.length > 11
+      return false if !@bank_account_number.nil? && @bank_account_number.to_s.length > 100
+      user_type_validator = EnumAttributeValidator.new('String', ["STANDARD", "EXTENDED", "NO_ACCESS"])
+      return false unless user_type_validator.valid?(@user_type)
+      return true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] first_name Value to be assigned
+    def first_name=(first_name)
+      if first_name.nil?
+        fail ArgumentError, "first_name cannot be nil"
+      end
+
+      if first_name.to_s.length > 100
+        fail ArgumentError, "invalid value for 'first_name', the character length must be smaller than or equal to 100."
+      end
+
+      if first_name.to_s.length < 1
+        fail ArgumentError, "invalid value for 'first_name', the character length must be great than or equal to 1."
+      end
+
+      @first_name = first_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] last_name Value to be assigned
+    def last_name=(last_name)
+      if last_name.nil?
+        fail ArgumentError, "last_name cannot be nil"
+      end
+
+      if last_name.to_s.length > 100
+        fail ArgumentError, "invalid value for 'last_name', the character length must be smaller than or equal to 100."
+      end
+
+      if last_name.to_s.length < 1
+        fail ArgumentError, "invalid value for 'last_name', the character length must be great than or equal to 1."
+      end
+
+      @last_name = last_name
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] employee_number Value to be assigned
+    def employee_number=(employee_number)
+
+      if !employee_number.nil? && employee_number.to_s.length > 100
+        fail ArgumentError, "invalid value for 'employee_number', the character length must be smaller than or equal to 100."
+      end
+
+      if !employee_number.nil? && employee_number.to_s.length < 0
+        fail ArgumentError, "invalid value for 'employee_number', the character length must be great than or equal to 0."
+      end
+
+      @employee_number = employee_number
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] email Value to be assigned
+    def email=(email)
+
+      if !email.nil? && email.to_s.length > 100
+        fail ArgumentError, "invalid value for 'email', the character length must be smaller than or equal to 100."
+      end
+
+      @email = email
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] phone_number_mobile Value to be assigned
+    def phone_number_mobile=(phone_number_mobile)
+
+      if !phone_number_mobile.nil? && phone_number_mobile.to_s.length > 100
+        fail ArgumentError, "invalid value for 'phone_number_mobile', the character length must be smaller than or equal to 100."
+      end
+
+      @phone_number_mobile = phone_number_mobile
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] phone_number_home Value to be assigned
+    def phone_number_home=(phone_number_home)
+
+      if !phone_number_home.nil? && phone_number_home.to_s.length > 100
+        fail ArgumentError, "invalid value for 'phone_number_home', the character length must be smaller than or equal to 100."
+      end
+
+      @phone_number_home = phone_number_home
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] national_identity_number Value to be assigned
+    def national_identity_number=(national_identity_number)
+
+      if !national_identity_number.nil? && national_identity_number.to_s.length > 100
+        fail ArgumentError, "invalid value for 'national_identity_number', the character length must be smaller than or equal to 100."
+      end
+
+      @national_identity_number = national_identity_number
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] dnumber Value to be assigned
+    def dnumber=(dnumber)
+
+      if !dnumber.nil? && dnumber.to_s.length > 11
+        fail ArgumentError, "invalid value for 'dnumber', the character length must be smaller than or equal to 11."
+      end
+
+      @dnumber = dnumber
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] bank_account_number Value to be assigned
+    def bank_account_number=(bank_account_number)
+
+      if !bank_account_number.nil? && bank_account_number.to_s.length > 100
+        fail ArgumentError, "invalid value for 'bank_account_number', the character length must be smaller than or equal to 100."
+      end
+
+      @bank_account_number = bank_account_number
+    end
+
+    # Custom attribute writer method checking allowed values (enum).
+    # @param [Object] user_type Object to be assigned
+    def user_type=(user_type)
+      validator = EnumAttributeValidator.new('String', ["STANDARD", "EXTENDED", "NO_ACCESS"])
+      unless validator.valid?(user_type)
+        fail ArgumentError, "invalid value for 'user_type', must be one of #{validator.allowable_values}."
+      end
+      @user_type = user_type
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          id == o.id &&
+          version == o.version &&
+          changes == o.changes &&
+          url == o.url &&
+          first_name == o.first_name &&
+          last_name == o.last_name &&
+          employee_number == o.employee_number &&
+          date_of_birth == o.date_of_birth &&
+          email == o.email &&
+          phone_number_mobile == o.phone_number_mobile &&
+          phone_number_home == o.phone_number_home &&
+          national_identity_number == o.national_identity_number &&
+          dnumber == o.dnumber &&
+          international_id == o.international_id &&
+          bank_account_number == o.bank_account_number &&
+          user_type == o.user_type &&
+          allow_information_registration == o.allow_information_registration &&
+          is_contact == o.is_contact &&
+          comments == o.comments &&
+          address == o.address &&
+          department == o.department &&
+          employments == o.employments
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Fixnum] Hash code
+    def hash
+      [id, version, changes, url, first_name, last_name, employee_number, date_of_birth, email, phone_number_mobile, phone_number_home, national_identity_number, dnumber, international_id, bank_account_number, user_type, allow_information_registration, is_contact, comments, address, department, employments].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      self.class.swagger_types.each_pair do |key, type|
+        if type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map{ |v| _deserialize($1, v) } )
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end # or else data not found in attributes(hash), not an issue as the data can be optional
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :DateTime
+        DateTime.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :BOOLEAN
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        temp_model = TripletexApi.const_get(type).new
+        temp_model.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        next if value.nil?
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map{ |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end