tripletex_api 1.0.0

data/spec/api/order_api_spec.rb

@@ -0,0 +1,110 @@
+=begin
+#Tripletex API
+
+#The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields.  **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`.  **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>.  **\"requestID\"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value.  **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/swagger-api/swagger-codegen). This document was generated from the Swagger JSON file.  **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET.  **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ`  **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`.  **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like.  **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization.  **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.**   ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**.  - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed.  - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab \"API access\". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0)  - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in \"Basic Authentication Header\" for API calls.  - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>.  - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts.  - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>.   ## Tags: - <div class=\"tag-icon-beta\"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class=\"tag-icon-deprecated\"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future \"major\" API release. We therefore discourage all use of this feature/capability.  ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours`  returns `{project:..., activity:...., hours:...}`. - just `project` returns `\"project\" : { \"id\": 12345, \"url\": \"tripletex.no/v2/projects/12345\"  }`. - `project(*)` returns `\"project\" : { \"id\": 12345 \"name\":\"ProjectName\" \"number.....startDate\": \"2013-01-07\" }`. - `project(name)` returns `\"project\" : { \"name\":\"ProjectName\" }`. - All elements and some subElements :  `*,activity(name),employee(*)`.  ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available:  - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated  NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation).  ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period.  Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period.   ## Response envelope: ``` {   \"fullResultSize\": ###,   \"from\": ###, // Paging starting from   \"count\": ###, // Paging count   \"versionDigest\": \"Hash of full result\",   \"values\": [...list of objects...] } {   \"value\": {...single object...} } ```   ## WebHook envelope: ``` {   \"subscriptionId\": ###,   \"event\": \"object.verb\", // As listed from /v2/event/   \"id\": ###, // Object id   \"value\": {... single object, null if object.deleted ...} } ```    ## Error/warning envelope: ``` {   \"status\": ###, // HTTP status code   \"code\": #####, // internal status code of event   \"message\": \"Basic feedback message in your language\",   \"link\": \"Link to doc\",   \"developerMessage\": \"More technical message\",   \"validationMessages\": [ // Will be null if Error     {       \"field\": \"Name of field\",       \"message\": \"Validation failure information\"     }   ],   \"requestId\": \"UUID used in any logs\" } ```   ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: \"/:anAction\" or DELETE. - **400 Bad request** -   - **4000** Bad Request Exception   - **11000** Illegal Filter Exception   - **12000** Path Param Exception   - **24000**   Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided   -  **3000** Authentication Exception   -  **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist.   -  **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates   -  **7000** Object Exists Exception   -  **8000** Revision Exception   - **10000** Locked Exception   - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload.   - **15000** Value Validation Exception   - **16000** Mapping Exception   - **17000** Sorting Exception   - **18000** Validation Exception   - **21000** Param Exception   - **22000** Invalid JSON Exception   - **23000**   Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** -  Unexpected condition was encountered and no more specific message is suitable   -  **1000** Exception
+
+OpenAPI spec version: 2.26.2
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.3.1
+
+=end
+
+require 'spec_helper'
+require 'json'
+
+# Unit tests for TripletexApi::OrderApi
+# Automatically generated by swagger-codegen (github.com/swagger-api/swagger-codegen)
+# Please update as you see appropriate
+describe 'OrderApi' do
+  before do
+    # run before each test
+    @instance = TripletexApi::OrderApi.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of OrderApi' do
+    it 'should create an instance of OrderApi' do
+      expect(@instance).to be_instance_of(TripletexApi::OrderApi)
+    end
+  end
+
+  # unit tests for get
+  # Get order by ID.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ResponseWrapperOrder]
+  describe 'get test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for invoice
+  # Create new invoice from order.
+  # 
+  # @param id ID of order to invoice.
+  # @param invoice_date To and excluding
+  # @param [Hash] opts the optional parameters
+  # @option opts [BOOLEAN] :send_to_customer Send invoice to customer
+  # @option opts [Integer] :payment_type_id Payment type to register prepayment of the invoice. paymentTypeId and paidAmount are optional, but both must be provided if the invoice has already been paid.
+  # @option opts [Float] :paid_amount Paid amount to register prepayment of the invoice, in invoice currency. paymentTypeId and paidAmount are optional, but both must be provided if the invoice has already been paid.
+  # @return [ResponseWrapperInvoice]
+  describe 'invoice test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for post
+  # Create order.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Order] :body JSON representing the new object to be created. Should not have ID and version set.
+  # @return [ResponseWrapperOrder]
+  describe 'post test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for put
+  # Update order.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [Order] :body Partial object describing what should be updated
+  # @return [ResponseWrapperOrder]
+  describe 'put test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for search
+  # Find orders corresponding with sent data.
+  # 
+  # @param order_date_from From and including
+  # @param order_date_to To and excluding
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :id List of IDs
+  # @option opts [String] :number Equals
+  # @option opts [String] :customer_id List of IDs
+  # @option opts [BOOLEAN] :is_closed Equals
+  # @option opts [Integer] :from From index
+  # @option opts [Integer] :count Number of elements to return
+  # @option opts [String] :sorting Sorting pattern
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ListResponseOrder]
+  describe 'search test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/api/orderorderline_api_spec.rb

@@ -0,0 +1,84 @@
+=begin
+#Tripletex API
+
+#The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields.  **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`.  **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>.  **\"requestID\"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value.  **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/swagger-api/swagger-codegen). This document was generated from the Swagger JSON file.  **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET.  **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ`  **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`.  **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like.  **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization.  **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.**   ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**.  - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed.  - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab \"API access\". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0)  - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in \"Basic Authentication Header\" for API calls.  - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>.  - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts.  - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>.   ## Tags: - <div class=\"tag-icon-beta\"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class=\"tag-icon-deprecated\"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future \"major\" API release. We therefore discourage all use of this feature/capability.  ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours`  returns `{project:..., activity:...., hours:...}`. - just `project` returns `\"project\" : { \"id\": 12345, \"url\": \"tripletex.no/v2/projects/12345\"  }`. - `project(*)` returns `\"project\" : { \"id\": 12345 \"name\":\"ProjectName\" \"number.....startDate\": \"2013-01-07\" }`. - `project(name)` returns `\"project\" : { \"name\":\"ProjectName\" }`. - All elements and some subElements :  `*,activity(name),employee(*)`.  ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available:  - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated  NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation).  ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period.  Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period.   ## Response envelope: ``` {   \"fullResultSize\": ###,   \"from\": ###, // Paging starting from   \"count\": ###, // Paging count   \"versionDigest\": \"Hash of full result\",   \"values\": [...list of objects...] } {   \"value\": {...single object...} } ```   ## WebHook envelope: ``` {   \"subscriptionId\": ###,   \"event\": \"object.verb\", // As listed from /v2/event/   \"id\": ###, // Object id   \"value\": {... single object, null if object.deleted ...} } ```    ## Error/warning envelope: ``` {   \"status\": ###, // HTTP status code   \"code\": #####, // internal status code of event   \"message\": \"Basic feedback message in your language\",   \"link\": \"Link to doc\",   \"developerMessage\": \"More technical message\",   \"validationMessages\": [ // Will be null if Error     {       \"field\": \"Name of field\",       \"message\": \"Validation failure information\"     }   ],   \"requestId\": \"UUID used in any logs\" } ```   ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: \"/:anAction\" or DELETE. - **400 Bad request** -   - **4000** Bad Request Exception   - **11000** Illegal Filter Exception   - **12000** Path Param Exception   - **24000**   Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided   -  **3000** Authentication Exception   -  **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist.   -  **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates   -  **7000** Object Exists Exception   -  **8000** Revision Exception   - **10000** Locked Exception   - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload.   - **15000** Value Validation Exception   - **16000** Mapping Exception   - **17000** Sorting Exception   - **18000** Validation Exception   - **21000** Param Exception   - **22000** Invalid JSON Exception   - **23000**   Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** -  Unexpected condition was encountered and no more specific message is suitable   -  **1000** Exception
+
+OpenAPI spec version: 2.26.2
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.3.1
+
+=end
+
+require 'spec_helper'
+require 'json'
+
+# Unit tests for TripletexApi::OrderorderlineApi
+# Automatically generated by swagger-codegen (github.com/swagger-api/swagger-codegen)
+# Please update as you see appropriate
+describe 'OrderorderlineApi' do
+  before do
+    # run before each test
+    @instance = TripletexApi::OrderorderlineApi.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of OrderorderlineApi' do
+    it 'should create an instance of OrderorderlineApi' do
+      expect(@instance).to be_instance_of(TripletexApi::OrderorderlineApi)
+    end
+  end
+
+  # unit tests for delete
+  # [BETA] Delete order line by ID.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @return [nil]
+  describe 'delete test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for get
+  # Get order line by ID.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ResponseWrapperOrderLine]
+  describe 'get test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for post
+  # Create order line. When creating several order lines, use /list for better performance.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [OrderLine] :body JSON representing the new object to be created. Should not have ID and version set.
+  # @return [ResponseWrapperOrderLine]
+  describe 'post test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for post_list
+  # Create multiple order lines.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Array<OrderLine>] :body JSON representing a list of new object to be created. Should not have ID and version set.
+  # @return [ListResponseOrderLine]
+  describe 'post_list test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/api/product_api_spec.rb

@@ -0,0 +1,104 @@
+=begin
+#Tripletex API
+
+#The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields.  **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`.  **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>.  **\"requestID\"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value.  **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/swagger-api/swagger-codegen). This document was generated from the Swagger JSON file.  **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET.  **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ`  **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`.  **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like.  **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization.  **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.**   ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**.  - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed.  - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab \"API access\". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0)  - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in \"Basic Authentication Header\" for API calls.  - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>.  - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts.  - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>.   ## Tags: - <div class=\"tag-icon-beta\"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class=\"tag-icon-deprecated\"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future \"major\" API release. We therefore discourage all use of this feature/capability.  ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours`  returns `{project:..., activity:...., hours:...}`. - just `project` returns `\"project\" : { \"id\": 12345, \"url\": \"tripletex.no/v2/projects/12345\"  }`. - `project(*)` returns `\"project\" : { \"id\": 12345 \"name\":\"ProjectName\" \"number.....startDate\": \"2013-01-07\" }`. - `project(name)` returns `\"project\" : { \"name\":\"ProjectName\" }`. - All elements and some subElements :  `*,activity(name),employee(*)`.  ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available:  - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated  NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation).  ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period.  Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period.   ## Response envelope: ``` {   \"fullResultSize\": ###,   \"from\": ###, // Paging starting from   \"count\": ###, // Paging count   \"versionDigest\": \"Hash of full result\",   \"values\": [...list of objects...] } {   \"value\": {...single object...} } ```   ## WebHook envelope: ``` {   \"subscriptionId\": ###,   \"event\": \"object.verb\", // As listed from /v2/event/   \"id\": ###, // Object id   \"value\": {... single object, null if object.deleted ...} } ```    ## Error/warning envelope: ``` {   \"status\": ###, // HTTP status code   \"code\": #####, // internal status code of event   \"message\": \"Basic feedback message in your language\",   \"link\": \"Link to doc\",   \"developerMessage\": \"More technical message\",   \"validationMessages\": [ // Will be null if Error     {       \"field\": \"Name of field\",       \"message\": \"Validation failure information\"     }   ],   \"requestId\": \"UUID used in any logs\" } ```   ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: \"/:anAction\" or DELETE. - **400 Bad request** -   - **4000** Bad Request Exception   - **11000** Illegal Filter Exception   - **12000** Path Param Exception   - **24000**   Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided   -  **3000** Authentication Exception   -  **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist.   -  **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates   -  **7000** Object Exists Exception   -  **8000** Revision Exception   - **10000** Locked Exception   - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload.   - **15000** Value Validation Exception   - **16000** Mapping Exception   - **17000** Sorting Exception   - **18000** Validation Exception   - **21000** Param Exception   - **22000** Invalid JSON Exception   - **23000**   Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** -  Unexpected condition was encountered and no more specific message is suitable   -  **1000** Exception
+
+OpenAPI spec version: 2.26.2
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.3.1
+
+=end
+
+require 'spec_helper'
+require 'json'
+
+# Unit tests for TripletexApi::ProductApi
+# Automatically generated by swagger-codegen (github.com/swagger-api/swagger-codegen)
+# Please update as you see appropriate
+describe 'ProductApi' do
+  before do
+    # run before each test
+    @instance = TripletexApi::ProductApi.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ProductApi' do
+    it 'should create an instance of ProductApi' do
+      expect(@instance).to be_instance_of(TripletexApi::ProductApi)
+    end
+  end
+
+  # unit tests for get
+  # Get product by ID.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ResponseWrapperProduct]
+  describe 'get test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for post
+  # Create new product.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Product] :body JSON representing the new object to be created. Should not have ID and version set.
+  # @return [ResponseWrapperProduct]
+  describe 'post test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for put
+  # Update product.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [Product] :body Partial object describing what should be updated
+  # @return [ResponseWrapperProduct]
+  describe 'put test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for search
+  # Find products corresponding with sent data.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :number DEPRECATED. List of product numbers (Integer only)
+  # @option opts [Array<String>] :product_number List of valid product numbers
+  # @option opts [String] :name Containing
+  # @option opts [BOOLEAN] :is_inactive Equals
+  # @option opts [BOOLEAN] :is_stock_item Equals
+  # @option opts [String] :currency_id Equals
+  # @option opts [String] :vat_type_id Equals
+  # @option opts [String] :product_unit_id Equals
+  # @option opts [String] :department_id Equals
+  # @option opts [String] :account_id Equals
+  # @option opts [Float] :cost_excluding_vat_currency_from From and including
+  # @option opts [Float] :cost_excluding_vat_currency_to To and excluding
+  # @option opts [Float] :price_excluding_vat_currency_from From and including
+  # @option opts [Float] :price_excluding_vat_currency_to To and excluding
+  # @option opts [Float] :price_including_vat_currency_from From and including
+  # @option opts [Float] :price_including_vat_currency_to To and excluding
+  # @option opts [Integer] :from From index
+  # @option opts [Integer] :count Number of elements to return
+  # @option opts [String] :sorting Sorting pattern
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ListResponseProduct]
+  describe 'search test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/api/productunit_api_spec.rb

@@ -0,0 +1,67 @@
+=begin
+#Tripletex API
+
+#The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields.  **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`.  **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>.  **\"requestID\"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value.  **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/swagger-api/swagger-codegen). This document was generated from the Swagger JSON file.  **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET.  **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ`  **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`.  **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like.  **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization.  **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.**   ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**.  - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed.  - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab \"API access\". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0)  - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in \"Basic Authentication Header\" for API calls.  - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>.  - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts.  - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>.   ## Tags: - <div class=\"tag-icon-beta\"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class=\"tag-icon-deprecated\"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future \"major\" API release. We therefore discourage all use of this feature/capability.  ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours`  returns `{project:..., activity:...., hours:...}`. - just `project` returns `\"project\" : { \"id\": 12345, \"url\": \"tripletex.no/v2/projects/12345\"  }`. - `project(*)` returns `\"project\" : { \"id\": 12345 \"name\":\"ProjectName\" \"number.....startDate\": \"2013-01-07\" }`. - `project(name)` returns `\"project\" : { \"name\":\"ProjectName\" }`. - All elements and some subElements :  `*,activity(name),employee(*)`.  ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available:  - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated  NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation).  ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period.  Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period.   ## Response envelope: ``` {   \"fullResultSize\": ###,   \"from\": ###, // Paging starting from   \"count\": ###, // Paging count   \"versionDigest\": \"Hash of full result\",   \"values\": [...list of objects...] } {   \"value\": {...single object...} } ```   ## WebHook envelope: ``` {   \"subscriptionId\": ###,   \"event\": \"object.verb\", // As listed from /v2/event/   \"id\": ###, // Object id   \"value\": {... single object, null if object.deleted ...} } ```    ## Error/warning envelope: ``` {   \"status\": ###, // HTTP status code   \"code\": #####, // internal status code of event   \"message\": \"Basic feedback message in your language\",   \"link\": \"Link to doc\",   \"developerMessage\": \"More technical message\",   \"validationMessages\": [ // Will be null if Error     {       \"field\": \"Name of field\",       \"message\": \"Validation failure information\"     }   ],   \"requestId\": \"UUID used in any logs\" } ```   ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: \"/:anAction\" or DELETE. - **400 Bad request** -   - **4000** Bad Request Exception   - **11000** Illegal Filter Exception   - **12000** Path Param Exception   - **24000**   Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided   -  **3000** Authentication Exception   -  **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist.   -  **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates   -  **7000** Object Exists Exception   -  **8000** Revision Exception   - **10000** Locked Exception   - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload.   - **15000** Value Validation Exception   - **16000** Mapping Exception   - **17000** Sorting Exception   - **18000** Validation Exception   - **21000** Param Exception   - **22000** Invalid JSON Exception   - **23000**   Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** -  Unexpected condition was encountered and no more specific message is suitable   -  **1000** Exception
+
+OpenAPI spec version: 2.26.2
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.3.1
+
+=end
+
+require 'spec_helper'
+require 'json'
+
+# Unit tests for TripletexApi::ProductunitApi
+# Automatically generated by swagger-codegen (github.com/swagger-api/swagger-codegen)
+# Please update as you see appropriate
+describe 'ProductunitApi' do
+  before do
+    # run before each test
+    @instance = TripletexApi::ProductunitApi.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ProductunitApi' do
+    it 'should create an instance of ProductunitApi' do
+      expect(@instance).to be_instance_of(TripletexApi::ProductunitApi)
+    end
+  end
+
+  # unit tests for get
+  # Get product unit by ID.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ResponseWrapperProductUnit]
+  describe 'get test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for search
+  # Find product units corresponding with sent data.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :id List of IDs
+  # @option opts [String] :name Names
+  # @option opts [String] :name_short Short names
+  # @option opts [String] :common_code Common codes
+  # @option opts [Integer] :from From index
+  # @option opts [Integer] :count Number of elements to return
+  # @option opts [String] :sorting Sorting pattern
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ListResponseProductUnit]
+  describe 'search test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/api/project_api_spec.rb

@@ -0,0 +1,179 @@
+=begin
+#Tripletex API
+
+#The Tripletex API is a **RESTful API**, which does not implement PATCH, but uses a PUT with optional fields.  **Actions** or commands are represented in our RESTful path with a prefixed `:`. Example: `/v2/hours/123/:approve`.  **Summaries** or aggregated results are represented in our RESTful path with a prefixed <code>&gt;</code>. Example: <code>/v2/hours/&gt;thisWeeksBillables</code>.  **\"requestID\"** is a key found in all validation and error responses. If additional log information is absolutely necessary, our support division can locate the key value.  **Download** the [swagger.json](/v2/swagger.json) file [OpenAPI Specification](https://github.com/OAI/OpenAPI-Specification) to [generate code](https://github.com/swagger-api/swagger-codegen). This document was generated from the Swagger JSON file.  **version:** This is a versioning number found on all DB records. If included, it will prevent your PUT/POST from overriding any updates to the record since your GET.  **Date & DateTime** follows the **ISO 8601** standard. Date: `YYYY-MM-DD`. DateTime: `YYYY-MM-DDThh:mm:ssZ`  **Sorting** is done by specifying a comma separated list, where a `-` prefix denotes descending. You can sort by sub object with the following format: `project.name, -date`.  **Searching:** is done by entering values in the optional fields for each API call. The values fall into the following categories: range, in, exact and like.  **Missing fields or even no response data** can occur because result objects and fields are filtered on authorization.  **See [FAQ](https://tripletex.no/execute/docViewer?articleId=906&language=0) for more additional information.**   ## Authentication: - **Tokens:** The Tripletex API uses 3 different tokens - **consumerToken**, **employeeToken** and **sessionToken**.  - **consumerToken** is a token provided to the consumer by Tripletex after the API 2.0 registration is completed.  - **employeeToken** is a token created by an administrator in your Tripletex account via the user settings and the tab \"API access\". Each employee token must be given a set of entitlements. [Read more here.](https://tripletex.no/execute/docViewer?articleId=853&language=0)  - **sessionToken** is the token from `/token/session/:create` which requires a consumerToken and an employeeToken created with the same consumer token, but not an authentication header. See how to create a sessionToken [here](https://tripletex.no/execute/docViewer?articleId=855&language=0). - The session token is used as the password in \"Basic Authentication Header\" for API calls.  - Use blank or `0` as username for accessing the account with regular employee token, or if a company owned employee token accesses <code>/company/&gt;withLoginAccess</code> or <code>/token/session/&gt;whoAmI</code>.  - For company owned employee tokens (accounting offices) the ID from <code>/company/&gt;withLoginAccess</code> can be used as username for accessing client accounts.  - If you need to create the header yourself use <code>Authorization: Basic &lt;base64encode('0:sessionToken')&gt;</code>.   ## Tags: - <div class=\"tag-icon-beta\"></div> **[BETA]** This is a beta endpoint and can be subject to change. - <div class=\"tag-icon-deprecated\"></div> **[DEPRECATED]** Deprecated means that we intend to remove/change this feature or capability in a future \"major\" API release. We therefore discourage all use of this feature/capability.  ## Fields: Use the `fields` parameter to specify which fields should be returned. This also supports fields from sub elements. Example values: - `project,activity,hours`  returns `{project:..., activity:...., hours:...}`. - just `project` returns `\"project\" : { \"id\": 12345, \"url\": \"tripletex.no/v2/projects/12345\"  }`. - `project(*)` returns `\"project\" : { \"id\": 12345 \"name\":\"ProjectName\" \"number.....startDate\": \"2013-01-07\" }`. - `project(name)` returns `\"project\" : { \"name\":\"ProjectName\" }`. - All elements and some subElements :  `*,activity(name),employee(*)`.  ## Changes: To get the changes for a resource, `changes` have to be explicitly specified as part of the `fields` parameter, e.g. `*,changes`. There are currently two types of change available:  - `CREATE` for when the resource was created - `UPDATE` for when the resource was updated  NOTE: For objects created prior to October 24th 2018 the list may be incomplete, but will always contain the CREATE and the last change (if the object has been changed after creation).  ## Rate limiting in each response header: Rate limiting is performed on the API calls for an employee for each API consumer. Status regarding the rate limit is returned as headers: - `X-Rate-Limit-Limit` - The number of allowed requests in the current period. - `X-Rate-Limit-Remaining` - The number of remaining requests. - `X-Rate-Limit-Reset` - The number of seconds left in the current period.  Once the rate limit is hit, all requests will return HTTP status code `429` for the remainder of the current period.   ## Response envelope: ``` {   \"fullResultSize\": ###,   \"from\": ###, // Paging starting from   \"count\": ###, // Paging count   \"versionDigest\": \"Hash of full result\",   \"values\": [...list of objects...] } {   \"value\": {...single object...} } ```   ## WebHook envelope: ``` {   \"subscriptionId\": ###,   \"event\": \"object.verb\", // As listed from /v2/event/   \"id\": ###, // Object id   \"value\": {... single object, null if object.deleted ...} } ```    ## Error/warning envelope: ``` {   \"status\": ###, // HTTP status code   \"code\": #####, // internal status code of event   \"message\": \"Basic feedback message in your language\",   \"link\": \"Link to doc\",   \"developerMessage\": \"More technical message\",   \"validationMessages\": [ // Will be null if Error     {       \"field\": \"Name of field\",       \"message\": \"Validation failure information\"     }   ],   \"requestId\": \"UUID used in any logs\" } ```   ## Status codes / Error codes: - **200 OK** - **201 Created** - From POSTs that create something new. - **204 No Content** - When there is no answer, ex: \"/:anAction\" or DELETE. - **400 Bad request** -   - **4000** Bad Request Exception   - **11000** Illegal Filter Exception   - **12000** Path Param Exception   - **24000**   Cryptography Exception - **401 Unauthorized** - When authentication is required and has failed or has not yet been provided   -  **3000** Authentication Exception   -  **9000** Security Exception - **403 Forbidden** - When AuthorisationManager says no. - **404 Not Found** - For content/IDs that does not exist.   -  **6000** Not Found Exception - **409 Conflict** - Such as an edit conflict between multiple simultaneous updates   -  **7000** Object Exists Exception   -  **8000** Revision Exception   - **10000** Locked Exception   - **14000** Duplicate entry - **422 Bad Request** - For Required fields or things like malformed payload.   - **15000** Value Validation Exception   - **16000** Mapping Exception   - **17000** Sorting Exception   - **18000** Validation Exception   - **21000** Param Exception   - **22000** Invalid JSON Exception   - **23000**   Result Set Too Large Exception - **429 Too Many Requests** - Request rate limit hit - **500 Internal Error** -  Unexpected condition was encountered and no more specific message is suitable   -  **1000** Exception
+
+OpenAPI spec version: 2.26.2
+
+Generated by: https://github.com/swagger-api/swagger-codegen.git
+Swagger Codegen version: 2.3.1
+
+=end
+
+require 'spec_helper'
+require 'json'
+
+# Unit tests for TripletexApi::ProjectApi
+# Automatically generated by swagger-codegen (github.com/swagger-api/swagger-codegen)
+# Please update as you see appropriate
+describe 'ProjectApi' do
+  before do
+    # run before each test
+    @instance = TripletexApi::ProjectApi.new
+  end
+
+  after do
+    # run after each test
+  end
+
+  describe 'test an instance of ProjectApi' do
+    it 'should create an instance of ProjectApi' do
+      expect(@instance).to be_instance_of(TripletexApi::ProjectApi)
+    end
+  end
+
+  # unit tests for delete
+  # [BETA] Delete project.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @return [nil]
+  describe 'delete test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for delete_by_ids
+  # [BETA] Delete projects.
+  # 
+  # @param ids ID of the elements
+  # @param [Hash] opts the optional parameters
+  # @return [nil]
+  describe 'delete_by_ids test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for delete_list
+  # [BETA] Delete multiple projects.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Array<Project>] :body JSON representing objects to delete. Should have ID and version set.
+  # @return [nil]
+  describe 'delete_list test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for get
+  # Find project by ID.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ResponseWrapperProject]
+  describe 'get test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for get_for_time_sheet
+  # Find projects applicable for time sheet registration on a specific day.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Integer] :employee_id Employee ID. Defaults to ID of token owner.
+  # @option opts [String] :date yyyy-MM-dd. Defaults to today.
+  # @option opts [Integer] :from From index
+  # @option opts [Integer] :count Number of elements to return
+  # @option opts [String] :sorting Sorting pattern
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ListResponseProject]
+  describe 'get_for_time_sheet test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for post
+  # [BETA] Add new project.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Project] :body JSON representing the new object to be created. Should not have ID and version set.
+  # @return [ResponseWrapperProject]
+  describe 'post test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for post_list
+  # [BETA] Register new projects. Multiple projects for different users can be sent in the same request.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Array<Project>] :body JSON representing a list of new object to be created. Should not have ID and version set.
+  # @return [ListResponseProject]
+  describe 'post_list test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for put
+  # [BETA] Update project.
+  # 
+  # @param id Element ID
+  # @param [Hash] opts the optional parameters
+  # @option opts [Project] :body Partial object describing what should be updated
+  # @return [ResponseWrapperProject]
+  describe 'put test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for put_list
+  # [BETA] Update multiple projects.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [Array<Project>] :body JSON representing updates to object. Should have ID and version set.
+  # @return [ListResponseProject]
+  describe 'put_list test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  # unit tests for search
+  # Find projects corresponding with sent data.
+  # 
+  # @param [Hash] opts the optional parameters
+  # @option opts [String] :id List of IDs
+  # @option opts [String] :name Containing
+  # @option opts [String] :number Equals
+  # @option opts [BOOLEAN] :is_offer Equals
+  # @option opts [String] :project_manager_id List of IDs
+  # @option opts [String] :employee_in_project_id List of IDs
+  # @option opts [String] :department_id List of IDs
+  # @option opts [String] :start_date_from From and including
+  # @option opts [String] :start_date_to To and excluding
+  # @option opts [String] :end_date_from From and including
+  # @option opts [String] :end_date_to To and excluding
+  # @option opts [BOOLEAN] :is_closed Equals
+  # @option opts [String] :customer_id Equals
+  # @option opts [String] :external_accounts_number Containing
+  # @option opts [Integer] :from From index
+  # @option opts [Integer] :count Number of elements to return
+  # @option opts [String] :sorting Sorting pattern
+  # @option opts [String] :fields Fields filter pattern
+  # @return [ListResponseProject]
+  describe 'search test' do
+    it "should work" do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end