trieve_ruby_client 0.8.2 → 0.11.0

data/lib/trieve_ruby_client/models/autocomplete_req_payload.rb

@@ -0,0 +1,509 @@
+=begin
+#Trieve API
+
+#Trieve OpenAPI Specification. This document describes all of the operations available through the Trieve API.
+
+The version of the OpenAPI document: 0.11.0
+Contact: developers@trieve.ai
+Generated by: https://openapi-generator.tech
+Generator version: 7.4.0
+
+=end
+
+require 'date'
+require 'time'
+
+module TrieveRubyClient
+  class AutocompleteReqPayload
+    # Set content_only to true to only returning the chunk_html of the chunks. This is useful for when you want to reduce amount of data over the wire for latency improvement (typically 10-50ms). Default is false.
+    attr_accessor :content_only
+
+    # If specified to true, this will extend the search results to include non-exact prefix matches of the same search_type such that a full page_size of results are returned. Default is false.
+    attr_accessor :extend_results
+
+    attr_accessor :filters
+
+    # Set highlight_delimiters to a list of strings to use as delimiters for highlighting. If not specified, this defaults to [\"?\", \",\", \".\", \"!\"]. These are the characters that will be used to split the chunk_html into splits for highlighting.
+    attr_accessor :highlight_delimiters
+
+    # Set highlight_max_length to control the maximum number of tokens (typically whitespace separated strings, but sometimes also word stems) which can be present within a single highlight. If not specified, this defaults to 8. This is useful to shorten large splits which may have low scores due to length compared to the query. Set to something very large like 100 to highlight entire splits.
+    attr_accessor :highlight_max_length
+
+    # Set highlight_max_num to control the maximum number of highlights per chunk. If not specified, this defaults to 3. It may be less than 3 if no snippets score above the highlight_threshold.
+    attr_accessor :highlight_max_num
+
+    # Set highlight_results to false for a slight latency improvement (1-10ms). If not specified, this defaults to true. This will add `<b><mark>` tags to the chunk_html of the chunks to highlight matching splits and return the highlights on each scored chunk in the response.
+    attr_accessor :highlight_results
+
+    # Set highlight_threshold to a lower or higher value to adjust the sensitivity of the highlights applied to the chunk html. If not specified, this defaults to 0.8. The range is 0.0 to 1.0.
+    attr_accessor :highlight_threshold
+
+    # Set highlight_window to a number to control the amount of words that are returned around the matched phrases. If not specified, this defaults to 0. This is useful for when you want to show more context around the matched words. When specified, window/2 whitespace separated words are added before and after each highlight in the response's highlights array. If an extended highlight overlaps with another highlight, the overlapping words are only included once.
+    attr_accessor :highlight_window
+
+    attr_accessor :location_bias
+
+    # Page size is the number of chunks to fetch. This can be used to fetch more than 10 chunks at a time.
+    attr_accessor :page_size
+
+    # Query is the search query. This can be any string. The query will be used to create an embedding vector and/or SPLADE vector which will be used to find the result set.
+    attr_accessor :query
+
+    # Recency Bias lets you determine how much of an effect the recency of chunks will have on the search results. If not specified, this defaults to 0.0. We recommend setting this to 1.0 for a gentle reranking of the results, >3.0 for a strong reranking of the results.
+    attr_accessor :recency_bias
+
+    # Set score_threshold to a float to filter out chunks with a score below the threshold. This threshold applies before weight and bias modifications. If not specified, this defaults to 0.0.
+    attr_accessor :score_threshold
+
+    attr_accessor :search_type
+
+    # Set slim_chunks to true to avoid returning the content and chunk_html of the chunks. This is useful for when you want to reduce amount of data over the wire for latency improvement (typically 10-50ms). Default is false.
+    attr_accessor :slim_chunks
+
+    # Tag weights is a JSON object which can be used to boost the ranking of chunks with certain tags. This is useful for when you want to be able to bias towards chunks with a certain tag on the fly. The keys are the tag names and the values are the weights.
+    attr_accessor :tag_weights
+
+    # If true, chunks will be reranked using scores from a cross encoder model. \"hybrid\" search will always use the reranker regardless of this setting.
+    attr_accessor :use_reranker
+
+    # Set use_weights to true to use the weights of the chunks in the result set in order to sort them. If not specified, this defaults to true.
+    attr_accessor :use_weights
+
+    class EnumAttributeValidator
+      attr_reader :datatype
+      attr_reader :allowable_values
+
+      def initialize(datatype, allowable_values)
+        @allowable_values = allowable_values.map do |value|
+          case datatype.to_s
+          when /Integer/i
+            value.to_i
+          when /Float/i
+            value.to_f
+          else
+            value
+          end
+        end
+      end
+
+      def valid?(value)
+        !value || allowable_values.include?(value)
+      end
+    end
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'content_only' => :'content_only',
+        :'extend_results' => :'extend_results',
+        :'filters' => :'filters',
+        :'highlight_delimiters' => :'highlight_delimiters',
+        :'highlight_max_length' => :'highlight_max_length',
+        :'highlight_max_num' => :'highlight_max_num',
+        :'highlight_results' => :'highlight_results',
+        :'highlight_threshold' => :'highlight_threshold',
+        :'highlight_window' => :'highlight_window',
+        :'location_bias' => :'location_bias',
+        :'page_size' => :'page_size',
+        :'query' => :'query',
+        :'recency_bias' => :'recency_bias',
+        :'score_threshold' => :'score_threshold',
+        :'search_type' => :'search_type',
+        :'slim_chunks' => :'slim_chunks',
+        :'tag_weights' => :'tag_weights',
+        :'use_reranker' => :'use_reranker',
+        :'use_weights' => :'use_weights'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'content_only' => :'Boolean',
+        :'extend_results' => :'Boolean',
+        :'filters' => :'ChunkFilter',
+        :'highlight_delimiters' => :'Array<String>',
+        :'highlight_max_length' => :'Integer',
+        :'highlight_max_num' => :'Integer',
+        :'highlight_results' => :'Boolean',
+        :'highlight_threshold' => :'Float',
+        :'highlight_window' => :'Integer',
+        :'location_bias' => :'GeoInfoWithBias',
+        :'page_size' => :'Integer',
+        :'query' => :'String',
+        :'recency_bias' => :'Float',
+        :'score_threshold' => :'Float',
+        :'search_type' => :'SearchMethod',
+        :'slim_chunks' => :'Boolean',
+        :'tag_weights' => :'Hash<String, Float>',
+        :'use_reranker' => :'Boolean',
+        :'use_weights' => :'Boolean'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+        :'content_only',
+        :'extend_results',
+        :'filters',
+        :'highlight_delimiters',
+        :'highlight_max_length',
+        :'highlight_max_num',
+        :'highlight_results',
+        :'highlight_threshold',
+        :'highlight_window',
+        :'location_bias',
+        :'page_size',
+        :'recency_bias',
+        :'score_threshold',
+        :'slim_chunks',
+        :'tag_weights',
+        :'use_reranker',
+        :'use_weights'
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `TrieveRubyClient::AutocompleteReqPayload` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `TrieveRubyClient::AutocompleteReqPayload`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'content_only')
+        self.content_only = attributes[:'content_only']
+      end
+
+      if attributes.key?(:'extend_results')
+        self.extend_results = attributes[:'extend_results']
+      end
+
+      if attributes.key?(:'filters')
+        self.filters = attributes[:'filters']
+      end
+
+      if attributes.key?(:'highlight_delimiters')
+        if (value = attributes[:'highlight_delimiters']).is_a?(Array)
+          self.highlight_delimiters = value
+        end
+      end
+
+      if attributes.key?(:'highlight_max_length')
+        self.highlight_max_length = attributes[:'highlight_max_length']
+      end
+
+      if attributes.key?(:'highlight_max_num')
+        self.highlight_max_num = attributes[:'highlight_max_num']
+      end
+
+      if attributes.key?(:'highlight_results')
+        self.highlight_results = attributes[:'highlight_results']
+      end
+
+      if attributes.key?(:'highlight_threshold')
+        self.highlight_threshold = attributes[:'highlight_threshold']
+      end
+
+      if attributes.key?(:'highlight_window')
+        self.highlight_window = attributes[:'highlight_window']
+      end
+
+      if attributes.key?(:'location_bias')
+        self.location_bias = attributes[:'location_bias']
+      end
+
+      if attributes.key?(:'page_size')
+        self.page_size = attributes[:'page_size']
+      end
+
+      if attributes.key?(:'query')
+        self.query = attributes[:'query']
+      else
+        self.query = nil
+      end
+
+      if attributes.key?(:'recency_bias')
+        self.recency_bias = attributes[:'recency_bias']
+      end
+
+      if attributes.key?(:'score_threshold')
+        self.score_threshold = attributes[:'score_threshold']
+      end
+
+      if attributes.key?(:'search_type')
+        self.search_type = attributes[:'search_type']
+      else
+        self.search_type = nil
+      end
+
+      if attributes.key?(:'slim_chunks')
+        self.slim_chunks = attributes[:'slim_chunks']
+      end
+
+      if attributes.key?(:'tag_weights')
+        if (value = attributes[:'tag_weights']).is_a?(Hash)
+          self.tag_weights = value
+        end
+      end
+
+      if attributes.key?(:'use_reranker')
+        self.use_reranker = attributes[:'use_reranker']
+      end
+
+      if attributes.key?(:'use_weights')
+        self.use_weights = attributes[:'use_weights']
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      warn '[DEPRECATED] the `list_invalid_properties` method is obsolete'
+      invalid_properties = Array.new
+      if !@highlight_max_length.nil? && @highlight_max_length < 0
+        invalid_properties.push('invalid value for "highlight_max_length", must be greater than or equal to 0.')
+      end
+
+      if !@highlight_max_num.nil? && @highlight_max_num < 0
+        invalid_properties.push('invalid value for "highlight_max_num", must be greater than or equal to 0.')
+      end
+
+      if !@highlight_window.nil? && @highlight_window < 0
+        invalid_properties.push('invalid value for "highlight_window", must be greater than or equal to 0.')
+      end
+
+      if !@page_size.nil? && @page_size < 0
+        invalid_properties.push('invalid value for "page_size", must be greater than or equal to 0.')
+      end
+
+      if @query.nil?
+        invalid_properties.push('invalid value for "query", query cannot be nil.')
+      end
+
+      if @search_type.nil?
+        invalid_properties.push('invalid value for "search_type", search_type cannot be nil.')
+      end
+
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      warn '[DEPRECATED] the `valid?` method is obsolete'
+      return false if !@highlight_max_length.nil? && @highlight_max_length < 0
+      return false if !@highlight_max_num.nil? && @highlight_max_num < 0
+      return false if !@highlight_window.nil? && @highlight_window < 0
+      return false if !@page_size.nil? && @page_size < 0
+      return false if @query.nil?
+      return false if @search_type.nil?
+      true
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] highlight_max_length Value to be assigned
+    def highlight_max_length=(highlight_max_length)
+      if !highlight_max_length.nil? && highlight_max_length < 0
+        fail ArgumentError, 'invalid value for "highlight_max_length", must be greater than or equal to 0.'
+      end
+
+      @highlight_max_length = highlight_max_length
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] highlight_max_num Value to be assigned
+    def highlight_max_num=(highlight_max_num)
+      if !highlight_max_num.nil? && highlight_max_num < 0
+        fail ArgumentError, 'invalid value for "highlight_max_num", must be greater than or equal to 0.'
+      end
+
+      @highlight_max_num = highlight_max_num
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] highlight_window Value to be assigned
+    def highlight_window=(highlight_window)
+      if !highlight_window.nil? && highlight_window < 0
+        fail ArgumentError, 'invalid value for "highlight_window", must be greater than or equal to 0.'
+      end
+
+      @highlight_window = highlight_window
+    end
+
+    # Custom attribute writer method with validation
+    # @param [Object] page_size Value to be assigned
+    def page_size=(page_size)
+      if !page_size.nil? && page_size < 0
+        fail ArgumentError, 'invalid value for "page_size", must be greater than or equal to 0.'
+      end
+
+      @page_size = page_size
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          content_only == o.content_only &&
+          extend_results == o.extend_results &&
+          filters == o.filters &&
+          highlight_delimiters == o.highlight_delimiters &&
+          highlight_max_length == o.highlight_max_length &&
+          highlight_max_num == o.highlight_max_num &&
+          highlight_results == o.highlight_results &&
+          highlight_threshold == o.highlight_threshold &&
+          highlight_window == o.highlight_window &&
+          location_bias == o.location_bias &&
+          page_size == o.page_size &&
+          query == o.query &&
+          recency_bias == o.recency_bias &&
+          score_threshold == o.score_threshold &&
+          search_type == o.search_type &&
+          slim_chunks == o.slim_chunks &&
+          tag_weights == o.tag_weights &&
+          use_reranker == o.use_reranker &&
+          use_weights == o.use_weights
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [content_only, extend_results, filters, highlight_delimiters, highlight_max_length, highlight_max_num, highlight_results, highlight_threshold, highlight_window, location_bias, page_size, query, recency_bias, score_threshold, search_type, slim_chunks, tag_weights, use_reranker, use_weights].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      transformed_hash = {}
+      openapi_types.each_pair do |key, type|
+        if attributes.key?(attribute_map[key]) && attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = nil
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[attribute_map[key]].is_a?(Array)
+            transformed_hash["#{key}"] = attributes[attribute_map[key]].map { |v| _deserialize($1, v) }
+          end
+        elsif !attributes[attribute_map[key]].nil?
+          transformed_hash["#{key}"] = _deserialize(type, attributes[attribute_map[key]])
+        end
+      end
+      new(transformed_hash)
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def self._deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = TrieveRubyClient.const_get(type)
+        klass.respond_to?(:openapi_any_of) || klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/trieve_ruby_client/models/batch_queued_chunk_response.rb

@@ -3,7 +3,7 @@
 
 #Trieve OpenAPI Specification. This document describes all of the operations available through the Trieve API.
 
-The version of the OpenAPI document: 0.8.2
+The version of the OpenAPI document: 0.11.0
 Contact: developers@trieve.ai
 Generated by: https://openapi-generator.tech
 Generator version: 7.4.0

data/lib/trieve_ruby_client/models/bookmark_data.rb

@@ -3,7 +3,7 @@
 
 #Trieve OpenAPI Specification. This document describes all of the operations available through the Trieve API.
 
-The version of the OpenAPI document: 0.8.2
+The version of the OpenAPI document: 0.10.7
 Contact: developers@trieve.ai
 Generated by: https://openapi-generator.tech
 Generator version: 7.4.0

data/lib/trieve_ruby_client/models/bookmark_group_response.rb

@@ -0,0 +1,105 @@
+=begin
+#Trieve API
+
+#Trieve OpenAPI Specification. This document describes all of the operations available through the Trieve API.
+
+The version of the OpenAPI document: 0.11.0
+Contact: developers@trieve.ai
+Generated by: https://openapi-generator.tech
+Generator version: 7.4.0
+
+=end
+
+require 'date'
+require 'time'
+
+module TrieveRubyClient
+  module BookmarkGroupResponse
+    class << self
+      # List of class defined in oneOf (OpenAPI v3)
+      def openapi_one_of
+        [
+          :'GetChunksForGroupsResponse',
+          :'GroupsBookmarkQueryResult'
+        ]
+      end
+
+      # Builds the object
+      # @param [Mixed] Data to be matched against the list of oneOf items
+      # @return [Object] Returns the model or the data itself
+      def build(data)
+        # Go through the list of oneOf items and attempt to identify the appropriate one.
+        # Note:
+        # - We do not attempt to check whether exactly one item matches.
+        # - No advanced validation of types in some cases (e.g. "x: { type: string }" will happily match { x: 123 })
+        #   due to the way the deserialization is made in the base_object template (it just casts without verifying).
+        # - TODO: scalar values are de facto behaving as if they were nullable.
+        # - TODO: logging when debugging is set.
+        openapi_one_of.each do |klass|
+          begin
+            next if klass == :AnyType # "nullable: true"
+            typed_data = find_and_cast_into_type(klass, data)
+            return typed_data if typed_data
+          rescue # rescue all errors so we keep iterating even if the current item lookup raises
+          end
+        end
+
+        openapi_one_of.include?(:AnyType) ? data : nil
+      end
+
+      private
+
+      SchemaMismatchError = Class.new(StandardError)
+
+      # Note: 'File' is missing here because in the regular case we get the data _after_ a call to JSON.parse.
+      def find_and_cast_into_type(klass, data)
+        return if data.nil?
+
+        case klass.to_s
+        when 'Boolean'
+          return data if data.instance_of?(TrueClass) || data.instance_of?(FalseClass)
+        when 'Float'
+          return data if data.instance_of?(Float)
+        when 'Integer'
+          return data if data.instance_of?(Integer)
+        when 'Time'
+          return Time.parse(data)
+        when 'Date'
+          return Date.parse(data)
+        when 'String'
+          return data if data.instance_of?(String)
+        when 'Object' # "type: object"
+          return data if data.instance_of?(Hash)
+        when /\AArray<(?<sub_type>.+)>\z/ # "type: array"
+          if data.instance_of?(Array)
+            sub_type = Regexp.last_match[:sub_type]
+            return data.map { |item| find_and_cast_into_type(sub_type, item) }
+          end
+        when /\AHash<String, (?<sub_type>.+)>\z/ # "type: object" with "additionalProperties: { ... }"
+          if data.instance_of?(Hash) && data.keys.all? { |k| k.instance_of?(Symbol) || k.instance_of?(String) }
+            sub_type = Regexp.last_match[:sub_type]
+            return data.each_with_object({}) { |(k, v), hsh| hsh[k] = find_and_cast_into_type(sub_type, v) }
+          end
+        else # model
+          const = TrieveRubyClient.const_get(klass)
+          if const
+            if const.respond_to?(:openapi_one_of) # nested oneOf model
+              model = const.build(data)
+              return model if model
+            else
+              # raise if data contains keys that are not known to the model
+              raise if const.respond_to?(:acceptable_attributes) && !(data.keys - const.acceptable_attributes).empty?
+              model = const.build_from_hash(data)
+              return model if model
+            end
+          end
+        end
+
+        raise # if no match by now, raise
+      rescue
+        raise SchemaMismatchError, "#{data} doesn't match the #{klass} type"
+      end
+    end
+  end
+
+end

data/lib/trieve_ruby_client/models/bookmark_group_result.rb

@@ -3,7 +3,7 @@
 
 #Trieve OpenAPI Specification. This document describes all of the operations available through the Trieve API.
 
-The version of the OpenAPI document: 0.8.2
+The version of the OpenAPI document: 0.11.0
 Contact: developers@trieve.ai
 Generated by: https://openapi-generator.tech
 Generator version: 7.4.0
@@ -36,7 +36,7 @@ module TrieveRubyClient
     def self.openapi_types
       {
         :'chunk_uuid' => :'String',
-        :'slim_groups' => :'Array<SlimGroup>'
+        :'slim_groups' => :'Array<ChunkGroupAndFileId>'
       }
     end