trackler 2.2.0.3 → 2.2.0.4

data/tracks/ecmascript/exercises/raindrops/README.md

@@ -0,0 +1,54 @@
+# Raindrops
+
+Convert a number to a string, the contents of which depend on the number's factors.
+
+- If the number has 3 as a factor, output 'Pling'.
+- If the number has 5 as a factor, output 'Plang'.
+- If the number has 7 as a factor, output 'Plong'.
+- If the number does not have 3, 5, or 7 as a factor,
+  just pass the number's digits straight through.
+
+## Examples
+
+- 28's factors are 1, 2, 4, **7**, 14, 28.
+  - In raindrop-speak, this would be a simple "Plong".
+- 30's factors are 1, 2, **3**, **5**, 6, 10, 15, 30.
+  - In raindrop-speak, this would be a "PlingPlang".
+- 34 has four factors: 1, 2, 17, and 34.
+  - In raindrop-speak, this would be "34".
+
+## Setup
+
+Go through the setup instructions for ECMAScript to
+install the necessary dependencies:
+
+http://exercism.io/languages/ecmascript
+
+## Requirements
+
+Install assignment dependencies:
+
+```bash
+$ npm install
+```
+
+## Making the test suite pass
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+In the test suites all tests but the first have been skipped.
+
+Once you get a test passing, you can enable the next one by
+changing `xtest` to `test`.
+
+
+## Source
+
+A variation on a famous interview question intended to weed out potential candidates. [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ecmascript/exercises/rna-transcription/README.md

@@ -0,0 +1,55 @@
+# Rna Transcription
+
+Given a DNA strand, return its RNA complement (per RNA transcription).
+
+Both DNA and RNA strands are a sequence of nucleotides.
+
+The four nucleotides found in DNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and thymine (**T**).
+
+The four nucleotides found in RNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and uracil (**U**).
+
+Given a DNA strand, its transcribed RNA strand is formed by replacing
+each nucleotide with its complement:
+
+* `G` -> `C`
+* `C` -> `G`
+* `T` -> `A`
+* `A` -> `U`
+
+## Setup
+
+Go through the setup instructions for ECMAScript to
+install the necessary dependencies:
+
+http://exercism.io/languages/ecmascript
+
+## Requirements
+
+Install assignment dependencies:
+
+```bash
+$ npm install
+```
+
+## Making the test suite pass
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+In the test suites all tests but the first have been skipped.
+
+Once you get a test passing, you can enable the next one by
+changing `xtest` to `test`.
+
+
+## Source
+
+Rosalind [http://rosalind.info/problems/rna](http://rosalind.info/problems/rna)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ecmascript/exercises/robot-name/README.md

@@ -0,0 +1,52 @@
+# Robot Name
+
+Manage robot factory settings.
+
+When robots come off the factory floor, they have no name.
+
+The first time you boot them up, a random name is generated in the format
+of two uppercase letters followed by three digits, such as RX837 or BC811.
+
+Every once in a while we need to reset a robot to its factory settings,
+which means that their name gets wiped. The next time you ask, it will
+respond with a new random name.
+
+The names must be random: they should not follow a predictable sequence.
+Random names means a risk of collisions. Your solution must ensure that
+every existing robot has a unique name.
+
+## Setup
+
+Go through the setup instructions for ECMAScript to
+install the necessary dependencies:
+
+http://exercism.io/languages/ecmascript
+
+## Requirements
+
+Install assignment dependencies:
+
+```bash
+$ npm install
+```
+
+## Making the test suite pass
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+In the test suites all tests but the first have been skipped.
+
+Once you get a test passing, you can enable the next one by
+changing `xtest` to `test`.
+
+
+## Source
+
+A debugging session with Paul Blackwell at gSchool. [http://gschool.it](http://gschool.it)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ecmascript/exercises/robot-simulator/README.md

@@ -0,0 +1,64 @@
+# Robot Simulator
+
+Write a robot simulator.
+
+A robot factory's test facility needs a program to verify robot movements.
+
+The robots have three possible movements:
+
+- turn right
+- turn left
+- advance
+
+Robots are placed on a hypothetical infinite grid, facing a particular
+direction (north, east, south, or west) at a set of {x,y} coordinates,
+e.g., {3,8}, with coordinates increasing to the north and east.
+
+The robot then receives a number of instructions, at which point the
+testing facility verifies the robot's new position, and in which
+direction it is pointing.
+
+- The letter-string "RAALAL" means:
+  - Turn right
+  - Advance twice
+  - Turn left
+  - Advance once
+  - Turn left yet again
+- Say a robot starts at {7, 3} facing north. Then running this stream
+  of instructions should leave it at {9, 4} facing west.
+
+## Setup
+
+Go through the setup instructions for ECMAScript to
+install the necessary dependencies:
+
+http://exercism.io/languages/ecmascript
+
+## Requirements
+
+Install assignment dependencies:
+
+```bash
+$ npm install
+```
+
+## Making the test suite pass
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+In the test suites all tests but the first have been skipped.
+
+Once you get a test passing, you can enable the next one by
+changing `xtest` to `test`.
+
+
+## Source
+
+Inspired by an interview question at a famous company.
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ecmascript/exercises/roman-numerals/README.md

@@ -0,0 +1,79 @@
+# Roman Numerals
+
+Write a function to convert from normal numbers to Roman Numerals.
+
+The Romans were a clever bunch. They conquered most of Europe and ruled
+it for hundreds of years. They invented concrete and straight roads and
+even bikinis. One thing they never discovered though was the number
+zero. This made writing and dating extensive histories of their exploits
+slightly more challenging, but the system of numbers they came up with
+is still in use today. For example the BBC uses Roman numerals to date
+their programmes.
+
+The Romans wrote numbers using letters - I, V, X, L, C, D, M. (notice
+these letters have lots of straight lines and are hence easy to hack
+into stone tablets).
+
+```
+ 1  => I
+10  => X
+ 7  => VII
+```
+
+There is no need to be able to convert numbers larger than about 3000.
+(The Romans themselves didn't tend to go any higher)
+
+Wikipedia says: Modern Roman numerals ... are written by expressing each
+digit separately starting with the left most digit and skipping any
+digit with a value of zero.
+
+To see this in practice, consider the example of 1990.
+
+In Roman numerals 1990 is MCMXC:
+
+1000=M
+900=CM
+90=XC
+
+2008 is written as MMVIII:
+
+2000=MM
+8=VIII
+
+See also: http://www.novaroma.org/via_romana/numbers.html
+
+## Setup
+
+Go through the setup instructions for ECMAScript to
+install the necessary dependencies:
+
+http://exercism.io/languages/ecmascript
+
+## Requirements
+
+Install assignment dependencies:
+
+```bash
+$ npm install
+```
+
+## Making the test suite pass
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+In the test suites all tests but the first have been skipped.
+
+Once you get a test passing, you can enable the next one by
+changing `xtest` to `test`.
+
+
+## Source
+
+The Roman Numeral Kata [http://codingdojo.org/cgi-bin/index.pl?KataRomanNumerals](http://codingdojo.org/cgi-bin/index.pl?KataRomanNumerals)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ecmascript/exercises/saddle-points/README.md

@@ -0,0 +1,63 @@
+# Saddle Points
+
+Detect saddle points in a matrix.
+
+So say you have a matrix like so:
+
+```plain
+    0  1  2
+  |---------
+0 | 9  8  7
+1 | 5  3  2     <--- saddle point at (1,0)
+2 | 6  6  7
+```
+
+It has a saddle point at (1, 0).
+
+It's called a "saddle point" because it is greater than or equal to
+every element in its row and the less than or equal to every element in
+its column.
+
+A matrix may have zero or more saddle points.
+
+Your code should be able to provide the (possibly empty) list of all the
+saddle points for any given matrix.
+
+Note that you may find other definitions of matrix saddle points online,
+but the tests for this exercise follow the above unambiguous definition.
+
+## Setup
+
+Go through the setup instructions for ECMAScript to
+install the necessary dependencies:
+
+http://exercism.io/languages/ecmascript
+
+## Requirements
+
+Install assignment dependencies:
+
+```bash
+$ npm install
+```
+
+## Making the test suite pass
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+In the test suites all tests but the first have been skipped.
+
+Once you get a test passing, you can enable the next one by
+changing `xtest` to `test`.
+
+
+## Source
+
+J Dalbey's Programming Practice problems [http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html](http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/ecmascript/exercises/say/README.md

@@ -0,0 +1,99 @@
+# Say
+
+Given a number from 0 to 999,999,999,999, spell out that number in English.
+
+## Step 1
+
+Handle the basic case of 0 through 99.
+
+If the input to the program is `22`, then the output should be
+`'twenty-two'`.
+
+Your program should complain loudly if given a number outside the
+blessed range.
+
+Some good test cases for this program are:
+
+- 0
+- 14
+- 50
+- 98
+- -1
+- 100
+
+### Extension
+
+If you're on a Mac, shell out to Mac OS X's `say` program to talk out
+loud.
+
+## Step 2
+
+Implement breaking a number up into chunks of thousands.
+
+So `1234567890` should yield a list like 1, 234, 567, and 890, while the
+far simpler `1000` should yield just 1 and 0.
+
+The program must also report any values that are out of range.
+
+## Step 3
+
+Now handle inserting the appropriate scale word between those chunks.
+
+So `1234567890` should yield `'1 billion 234 million 567 thousand 890'`
+
+The program must also report any values that are out of range.  It's
+fine to stop at "trillion".
+
+## Step 4
+
+Put it all together to get nothing but plain English.
+
+`12345` should give `twelve thousand three hundred forty-five`.
+
+The program must also report any values that are out of range.
+
+### Extensions
+
+Use _and_ (correctly) when spelling out the number in English:
+
+- 14 becomes "fourteen".
+- 100 becomes "one hundred".
+- 120 becomes "one hundred and twenty".
+- 1002 becomes "one thousand and two".
+- 1323 becomes "one thousand three hundred and twenty-three".
+
+## Setup
+
+Go through the setup instructions for ECMAScript to
+install the necessary dependencies:
+
+http://exercism.io/languages/ecmascript
+
+## Requirements
+
+Install assignment dependencies:
+
+```bash
+$ npm install
+```
+
+## Making the test suite pass
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+In the test suites all tests but the first have been skipped.
+
+Once you get a test passing, you can enable the next one by
+changing `xtest` to `test`.
+
+
+## Source
+
+A variation on JavaRanch CattleDrive, exercise 4a [http://www.javaranch.com/say.jsp](http://www.javaranch.com/say.jsp)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.