torquebox-server 2.3.0-java → 3.0.0.beta1-java

data/jboss/docs/schema/ejb-jar_2_0.dtd

@@ -1,1660 +0,0 @@
-<!--
-Copyright 2000-2001 Sun Microsystems, Inc. 901 San Antonio Road,
-Palo Alto, CA  94303, U.S.A.  All rights reserved.
-
-This product or document is protected by copyright and distributed
-under licenses restricting its use, copying, distribution, and
-decompilation.  No part of this product or documentation may be
-reproduced in any form by any means without prior written authorization
-of Sun and its licensors, if any.
-
-Third party software, including font technology, is copyrighted and
-licensed from Sun suppliers.
-
-Sun, Sun Microsystems, the Sun Logo, Solaris, Java, JavaServer Pages, Java
-Naming and Directory Interface, JDBC, JDK, JavaMail and Enterprise JavaBeans,
-are trademarks or registered trademarks of Sun Microsystems, Inc in the U.S.
-and other countries.
-
-All SPARC trademarks are used under license and are trademarks
-or registered trademarks of SPARC International, Inc.
-in the U.S. and other countries. Products bearing SPARC
-trademarks are based upon an architecture developed by Sun Microsystems, Inc.
-
-PostScript is a registered trademark of Adobe Systems, Inc.
-
-Federal Acquisitions: Commercial Software - Government Users Subject to
-Standard License Terms and Conditions.
-
-DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
-CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY
-IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
-PURPOSE OR NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT
-TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY
-INVALID.
-
-_________________________________________________________________________
-
-Copyright 2000-2001 Sun Microsystems, Inc.,
-901 San Antonio Road, Palo Alto, CA  94303, Etats-Unis.
-Tous droits re'serve's.
-
-
-Ce produit ou document est prote'ge' par un copyright et distribue' avec
-des licences qui en restreignent l'utilisation, la copie, la distribution,
-et la de'compilation.  Aucune partie de ce produit ou de sa documentation
-associe'e ne peut e^tre reproduite sous aucune forme, par quelque moyen
-que ce soit, sans l'autorisation pre'alable et e'crite de Sun et de ses
-bailleurs de licence, s'il y en a.
-
-Le logiciel de'tenu par des tiers, et qui comprend la technologie
-relative aux polices de caracte`res, est prote'ge' par un copyright
-et licencie' par des fournisseurs de Sun.
-
-Sun, Sun Microsystems, le logo Sun, Solaris, Java, JavaServer Pages, Java
-Naming and Directory Interface, JDBC, JDK, JavaMail, et Enterprise JavaBeans,
-sont des marques de fabrique ou des marques de'pose'es de Sun
-Microsystems, Inc. aux Etats-Unis et dans d'autres pays.
-
-Toutes les marques SPARC sont utilise'es sous licence et sont
-des marques de fabrique ou des marques de'pose'es de SPARC
-International, Inc. aux Etats-Unis et  dans
-d'autres pays. Les produits portant les marques SPARC sont
-base's sur une architecture de'veloppe'e par Sun Microsystems, Inc.
-
-Postcript est une marque enregistre'e d'Adobe Systems Inc.
-
-LA DOCUMENTATION EST FOURNIE "EN L'ETAT" ET TOUTES AUTRES CONDITIONS,
-DECLARATIONS ET GARANTIES EXPRESSES OU TACITES SONT FORMELLEMENT EXCLUES,
-DANS LA MESURE AUTORISEE PAR LA LOI APPLICABLE, Y COMPRIS NOTAMMENT
-TOUTE GARANTIE IMPLICITE RELATIVE A LA QUALITE MARCHANDE, A L'APTITUDE
-A UNE UTILISATION PARTICULIERE OU A L'ABSENCE DE CONTREFACON.
--->
-
-<!--
-This is the XML DTD for the EJB 2.0 deployment descriptor.
-All EJB 2.0 deployment descriptors must include a DOCTYPE
-of the following form:
-
-  <!DOCTYPE ejb-jar PUBLIC
-	"-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN"
-	"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
-
--->
-
-<!--
-The following conventions apply to all J2EE deployment descriptor
-elements unless indicated otherwise.
-
-- In elements that contain PCDATA, leading and trailing whitespace
-  in the data may be ignored.
-
-- In elements whose value is an "enumerated type", the value is
-  case sensitive.
-
-- In elements that specify a pathname to a file within the same
-  JAR file, relative filenames (i.e., those not starting with "/")
-  are considered relative to the root of the JAR file's namespace.
-  Absolute filenames (i.e., those starting with "/") also specify
-  names in the root of the JAR file's namespace.  In general, relative
-  names are preferred.  The exception is .war files where absolute
-  names are preferred for consistency with the servlet API.
--->
-
-
-<!--
-The ejb-jar element is the root element of the EJB deployment
-descriptor. It contains
-
-	- an optional description of the ejb-jar file
-	- an optional display name
-	- an optional small icon file name
-	- an optional large icon file name
-	- mandatory structural information about all included
-	  enterprise beans
-	- a descriptor for container managed relationships, if any
-	- an optional application-assembly descriptor
-	- an optional name of an ejb-client-jar file for the ejb-jar.
--->
-<!ELEMENT ejb-jar (description?, display-name?, small-icon?,
-large-icon?, enterprise-beans, relationships?, assembly-descriptor?,
-ejb-client-jar?)>
-
-<!--
-The abstract-schema-name element specifies the name of the abstract
-schema type of an entity bean with cmp-version 2.x. It is used in EJB
-QL queries.
-
-For example, the abstract-schema-name for an entity bean whose local
-interface is com.acme.commerce.Order might be Order.
-
-Used in: entity
--->
-<!ELEMENT abstract-schema-name (#PCDATA)>
-
-<!--
-
-The acknowledge-mode element specifies whether JMS AUTO_ACKNOWLEDGE or
-DUPS_OK_ACKNOWLEDGE message acknowledgment semantics should be used
-for the onMessage message of a message-driven bean that uses bean
-managed transaction demarcation.
-
-The acknowledge-mode element must be one of the two following:
-
-	<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
-	<acknowledge-mode>Dups-ok-acknowledge</acknowledgemode>
-
-Used in: message-driven
--->
-<!ELEMENT acknowledge-mode (#PCDATA)>
-
-<!--
-The assembly-descriptor element contains application-assembly information.
-
-The application-assembly information consists of the following parts:
-the definition of security roles, the definition of method
-permissions, the definition of transaction attributes for
-enterprise beans with container-managed transaction demarcation and
-a list of methods to be excluded from deployment.
-
-All the parts are optional in the sense that they are omitted if the
-lists represented by them are empty.
-
-Providing an assembly-descriptor in the deployment descriptor is
-optional for the ejb-jar file producer.
-
-Used in: ejb-jar
--->
-<!ELEMENT assembly-descriptor (security-role*, method-permission*,
-container-transaction*, exclude-list?)>
-
-<!--
-The cascade-delete element specifies that, within a particular
-relationship, the lifetime of one or more entity beans is dependent
-upon the lifetime of another entity bean. The cascade-delete element
-can only be specified for an ejb-relationship-role element contained
-in an ejb-relation element in which the other ejb-relationship-role
-element specifies a multiplicity of One.
-
-Used in: ejb-relationship-role
--->
-<!ELEMENT cascade-delete EMPTY>
-
-<!--
-The cmp-field element describes a container-managed field. The
-field element includes an optional description of the field, and the
-name of the field.
-
-Used in: entity
--->
-<!ELEMENT cmp-field (description?, field-name)>
-
-<!--
-The cmp-version element specifies the version of an entity bean
-with container-managed persistence.
-
-The cmp-version element must be one of the two following:
-
-	<cmp-version>1.x</cmp-version>
-	<cmp-version>2.x</cmp-version>
-
-The default value of the cmp-version element is 2.x.
-
-Used in: entity
--->
-<!ELEMENT cmp-version (#PCDATA)>
-
-<!--
-
-The cmr-field element describes the bean provider's view of a
-relationship. It consists of an optional description, and the name and
-the class type of a field in the source of a role of a
-relationship. The cmr-field-name element corresponds to the name used
-for the get and set accessor methods for the relationship. The
-cmr-field-type element is used only for collection-valued
-cmr-fields. It specifies the type of the collection that is used.
-
-Used in: ejb-relationship-role
--->
-<!ELEMENT cmr-field (description?, cmr-field-name, cmr-field-type?)>
-
-<!--
-The cmr-field-name element specifies the name of a logical
-relationship field in the entity bean class. The name of the cmr-field
-must begin with a lowercase letter. This field is accessed by methods
-whose names consists of the name of the field specified by
-cmr-field-name in which the first letter is uppercased, prefixed by
-"get" or "set".
-
-Used in: cmr-field
--->
-<!ELEMENT cmr-field-name (#PCDATA)>
-
-<!--
-The cmr-field-type element specifies the class of a
-collection-valued logical relationship field in the entity bean
-class. The value of the cmr-field-type element must be either:
-java.util.Collection or java.util.Set.
-
-Used in: cmr-field
--->
-<!ELEMENT cmr-field-type (#PCDATA)>
-
-<!--
-The container-transaction element specifies how the container
-must manage transaction scopes for the enterprise bean's method
-invocations. The element consists of an optional description, a list
-of method elements, and a transaction attribute. The transaction
-attribute is to be applied to all the specified methods.
-
-Used in: assembly-descriptor
--->
-<!ELEMENT container-transaction (description?, method+, trans-attribute)>
-
-<!--
-The description element is used to provide text describing the parent
-element.  The description element should include any information that
-the enterprise bean ejb-jar file producer wants to provide to the consumer of
-the enterprise bean ejb-jar file (i.e., to the Deployer). Typically, the tools
-used by the enterprise bean ejb-jar file consumer will display the description
-when processing the parent element that contains the description.
-
-Used in: cmp-field, cmr-field, container-transaction, ejb-jar,
-ejb-local-ref, ejb-ref, ejb-relation, ejb-relationship-role, entity,
-env-entry, exclude-list, message-driven, method, method-permission,
-query, relationship-role-source, relationships, resource-env-ref,
-resource-ref, run-as, security-identity, security-role,
-security-role-ref, session
--->
-<!ELEMENT description (#PCDATA)>
-
-<!--
-The destination-type element specifies the type of the JMS
-destination. The type is specified by the Java interface expected to
-be implemented by the destination.
-
-The destination-type element must be one of the two following:
-
-<destination-type>javax.jms.Queue</destination-type>
-<destination-type>javax.jms.Topic</destination-type>
-
-Used in: message-driven-destination
--->
-<!ELEMENT destination-type (#PCDATA)>
-
-<!--
-The display-name element contains a short name that is intended to be
-displayed by tools.  The display name need not be unique.
-
-Used in: ejb-jar, entity, message-driven, session
-
-Example:
-
-<display-name>Employee Self Service</display-name>
--->
-<!ELEMENT display-name (#PCDATA)>
-
-<!--
-The ejb-class element contains the fully-qualified name of the
-enterprise bean's class.
-
-Used in: entity, message-driven, session
-
-Example:
-
-<ejb-class>com.wombat.empl.EmployeeServiceBean</ejb-class>
--->
-<!ELEMENT ejb-class (#PCDATA)>
-
-<!--
-The optional ejb-client-jar element specifies a JAR file that contains
-the class files necessary for a client program to access the
-enterprise beans in the ejb-jar file.
-
-Used in: ejb-jar
-
-Example:
-
-<ejb-client-jar>employee_service_client.jar</ejb-client-jar>
--->
-<!ELEMENT ejb-client-jar (#PCDATA)>
-
-<!--
-The ejb-link element is used in the ejb-ref or ejb-local-ref
-elements to specify that an EJB reference is linked to an
-enterprise bean.
-
-The value of the ejb-link element must be the ejb-name of an
-enterprise bean in the same ejb-jar file or in another ejb-jar
-file in the same J2EE application unit.
-
-Alternatively, the name in the ejb-link element may be composed of a
-path name specifying the ejb-jar containing the referenced enterprise
-bean with the ejb-name of the target bean appended and separated from
-the path name by "#".  The path name is relative to the ejb-jar file
-containing the enterprise bean that is referencing the enterprise bean.
-This allows multiple enterprise beans with the same ejb-name to be
-uniquely identified.
-
-Used in: ejb-local-ref, ejb-ref
-
-Examples:
-
-	<ejb-link>EmployeeRecord</ejb-link>
-
-	<ejb-link>../products/product.jar#ProductEJB</ejb-link>
-
--->
-<!ELEMENT ejb-link (#PCDATA)>
-
-<!--
-The ejb-local-ref element is used for the declaration of a reference to
-an enterprise bean's local home. The declaration consists of:
-
-	- an optional description
-	- the EJB reference name used in the code of the enterprise bean
-	  that's referencing the enterprise bean
-	- the expected type of the referenced enterprise bean
-	- the expected local home and local interfaces of the referenced
-	  enterprise bean
-	- optional ejb-link information, used to specify the referenced
-	  enterprise bean
-
-Used in: entity, message-driven, session
--->
-<!ELEMENT ejb-local-ref (description?, ejb-ref-name, ejb-ref-type,
-		local-home, local, ejb-link?)>
-
-<!--
-The ejb-name element specifies an enterprise bean's name. This name is
-assigned by the ejb-jar file producer to name the enterprise bean in
-the ejb-jar file's deployment descriptor. The name must be unique
-among the names of the enterprise beans in the same ejb-jar file.
-
-There is no architected relationship between the ejb-name in the
-deployment descriptor and the JNDI name that the Deployer will assign
-to the enterprise bean's home.
-
-The name for an entity bean with cmp-version 2.x must conform to the
-lexical rules for an NMTOKEN. The name for an entity bean with
-cmp-version 2.x must not be a reserved literal in EJB QL.
-
-Used in: entity, message-driven, method, relationship-role-source,
-session
-
-Example:
-
-<ejb-name>EmployeeService</ejb-name>
--->
-<!ELEMENT ejb-name (#PCDATA)>
-
-<!--
-The ejb-ql element contains the EJB QL query string that defines
-a finder or select query. This element is defined within the scope of
-a query element whose contents specify the finder or the select method
-that uses the query. The content must be a valid EJB QL query string
-for the entity bean for which the query is specified.
-
-The ejb-ql element must be specified for all queries that are
-expressible in EJB QL.
-
-Used in: query
-
-Example:
-<query>
-    <query-method>
-        <method-name>ejbSelectPendingLineitems</method-name>
-        <method-params/>
-    </query-method>
-    <ejb-ql>SELECT ENTITY(l) FROM LineItems l WHERE l.shipped <> TRUE
-    </ejb-ql>
-</query>
-
--->
-<!ELEMENT ejb-ql (#PCDATA)>
-
-<!--
-The ejb-ref element is used for the declaration of a reference to
-an enterprise bean's home. The declaration consists of:
-
-	- an optional description
-	- the EJB reference name used in the code of
-	  the enterprise bean that's referencing the enterprise bean
-	- the expected type of the referenced enterprise bean
-	- the expected home and remote interfaces of the referenced
-	  enterprise bean
-	- optional ejb-link information, used to specify the referenced
-	  enterprise bean
-
-Used in: entity, message-driven, session
--->
-<!ELEMENT ejb-ref (description?, ejb-ref-name, ejb-ref-type,
-		home, remote, ejb-link?)>
-
-<!--
-The ejb-ref-name element contains the name of an EJB reference. The
-EJB reference is an entry in the enterprise bean's environment and is
-relative to the java:comp/env context.  The name must be unique
-within the enterprise bean.
-
-It is recommended that name is prefixed with "ejb/".
-
-Used in: ejb-local-ref, ejb-ref
-
-Example:
-
-<ejb-ref-name>ejb/Payroll</ejb-ref-name>
--->
-<!ELEMENT ejb-ref-name (#PCDATA)>
-
-<!--
-The ejb-ref-type element contains the expected type of the
-referenced enterprise bean.
-
-The ejb-ref-type element must be one of the following:
-
-	<ejb-ref-type>Entity</ejb-ref-type>
-	<ejb-ref-type>Session</ejb-ref-type>
-
-Used in: ejb-local-ref, ejb-ref
--->
-<!ELEMENT ejb-ref-type (#PCDATA)>
-
-<!--
-
-The ejb-relation element describes a relationship between two
-entity beans with container managed persistence.  An ejb-relation
-element contains a description; an optional ejb-relation-name element;
-and exactly two relationship role declarations, defined by the
-ejb-relationship-role elements. The name of the relationship, if
-specified, is unique within the ejb-jar file.
-
-Used in: relationships
--->
-<!ELEMENT ejb-relation (description?, ejb-relation-name?, ejb-relationship-role,
-ejb-relationship-role)>
-
-<!--
-The ejb-relation-name element provides a unique name for a relationship.
-
-Used in: ejb-relation
--->
-<!ELEMENT ejb-relation-name (#PCDATA)>
-
-<!--
-The ejb-relationship-role element describes a role within a
-relationship. There are two roles in each relationship.
-
-The ejb-relationship-role element contains an optional description; an
-optional name for the relationship role; a specification of the
-multiplicity of the role; an optional specification of cascade-delete
-functionality for the role; the role source; and a declaration of the
-cmr-field, if any, by means of which the other side of the
-relationship is accessed from the perspective of the role source.
-
-The multiplicity and role-source element are mandatory.
-
-The relationship-role-source element designates an entity bean by
-means of an ejb-name element. For bidirectional relationships, both
-roles of a relationship must declare a relationship-role-source
-element that specifies a cmr-field in terms of which the relationship
-is accessed. The lack of a cmr-field element in an
-ejb-relationship-role specifies that the relationship is
-unidirectional in navigability and the entity bean that participates
-in the relationship is "not aware" of the relationship.
-
-Used in: ejb-relation
-
-Example:
-
-<ejb-relation>
-    <ejb-relation-name>Product-LineItem</ejb-relation-name>
-    <ejb-relationship-role>
-        <ejb-relationship-role-name>product-has-lineitems
-        </ejb-relationship-role-name>
-        <multiplicity>One</multiplicity>
-        <relationship-role-source>
-        <ejb-name>ProductEJB</ejb-name>
-        </relationship-role-source>
-     </ejb-relationship-role>
-...
--->
-<!ELEMENT ejb-relationship-role (description?, ejb-relationship-role-name?,
-multiplicity, cascade-delete?, relationship-role-source, cmr-field?)>
-
-<!--
-The ejb-relationship-role-name element defines a name for a role that
-is unique within an ejb-relation. Different relationships can use the
-same name for a role.
-
-Used in: ejb-relationship-role
--->
-<!ELEMENT ejb-relationship-role-name (#PCDATA)>
-
-<!--
-The enterprise-beans element contains the declarations of one or more
-enterprise beans.
--->
-<!ELEMENT enterprise-beans (session | entity | message-driven)+>
-
-<!--
-The entity element declares an entity bean. The declaration
-consists of:
-
-	- an optional description
-	- an optional display name
-	- an optional small icon file name
-	- an optional large icon file name
-	- a unique name assigned to the enterprise bean
-	  in the deployment descriptor
-	- the names of the entity bean's home and component interfaces, if any
-	- the names of the entity bean's local home and local
-	  interface, if any
-	- the entity bean's implementation class
-	- the entity bean's persistence management type
-	- the entity bean's primary key class name
-	- an indication of the entity bean's reentrancy
-	- an optional specification of the entity bean's cmp-version
-	- an optional specification of the entity bean's abstract
-	  schema name
-	- an optional list of container-managed fields
-	- an optional specification of the primary key field
-	- an optional declaration of the bean's environment entries
-	- an optional declaration of the bean's EJB references
-	- an optional declaration of the bean's local EJB references
-	- an optional declaration of the security role references
-	- an optional declaration of the security identity
-	  to be used for the execution of the bean's methods
-	- an optional declaration of the bean's resource manager
-          connection factory references
-	- an optional declaration of the bean's
-	  resource environment references
-	- an optional set of query declarations
-	  for finder and select methods for an entity
-	  bean with cmp-version 2.x.
-
-The optional abstract-schema-name element must be specified for an
-entity bean with container managed persistence and cmp-version 2.x.
-
-The optional primkey-field may be present in the descriptor if the
-entity's persistence-type is Container.
-
-The optional cmp-version element may be present in the descriptor if
-the entity's persistence-type is Container. If the persistence-type is
-Container and the cmp-version element is not specified, its value
-defaults to 2.x.
-
-The optional home and remote elements must be specified if the entity
-bean cmp-version is 1.x.
-
-The optional local-home and local elements must be specified if the
-entity bean has a local home and local interface.
-
-Either both the local-home and the local elements or both the
-home and the remote elements must be specified.
-
-The optional query elements must be present if the persistence-type is
-Container and the cmp-version is 2.x and query methods other than
-findByPrimaryKey have been defined for the entity bean.
-
-The other elements that are optional are "optional" in the sense that
-they are omitted if the lists represented by them are empty.
-
-At least one cmp-field element must be present in the descriptor if
-the entity's persistence-type is Container and the cmp-version is 1.x,
-and none must not be present if the entity's persistence-type is Bean.
-
-Used in: enterprise-beans
-
--->
-<!ELEMENT entity (description?, display-name?, small-icon?,
-		large-icon?, ejb-name, home?, remote?, local-home?,
-		local?, ejb-class, persistence-type, prim-key-class,
-		reentrant, cmp-version?, abstract-schema-name?,
-		cmp-field*, primkey-field?, env-entry*, ejb-ref*,
-		ejb-local-ref*, security-role-ref*, security-identity?,
-		resource-ref*, resource-env-ref*, query*)>
-
-<!--
-The env-entry element contains the declaration of an enterprise bean's
-environment entry. The declaration consists of an optional
-description, the name of the environment entry, and an optional
-value.  If a value is not specified, one must be supplied
-during deployment.
-
-Used in: entity, message-driven, session
--->
-<!ELEMENT env-entry (description?, env-entry-name, env-entry-type,
-		env-entry-value?)>
-
-<!--
-The env-entry-name element contains the name of an enterprise bean's
-environment entry.  The name is a JNDI name relative to the
-java:comp/env context.  The name must be unique within an enterprise bean.
-
-Used in: env-entry
-
-Example:
-
-<env-entry-name>minAmount</env-entry-name>
--->
-<!ELEMENT env-entry-name (#PCDATA)>
-
-<!--
-The env-entry-type element contains the fully-qualified Java type of
-the environment entry value that is expected by the enterprise bean's
-code.
-
-The following are the legal values of env-entry-type:
-
-	java.lang.Boolean
-	java.lang.Byte
-	java.lang.Character
-	java.lang.String
-	java.lang.Short
-	java.lang.Integer
-	java.lang.Long
-	java.lang.Float
-	java.lang.Double
-
-
-Used in: env-entry
-
-Example:
-
-<env-entry-type>java.lang.Boolean</env-entry-type>
--->
-<!ELEMENT env-entry-type (#PCDATA)>
-
-<!--
-The env-entry-value element contains the value of an enterprise bean's
-environment entry. The value must be a String that is valid for the
-constructor of the specified type that takes a single String
-parameter, or for java.lang.Character, a single character.
-
-Used in: env-entry
-
-Example:
-
-<env-entry-value>100.00</env-entry-value>
--->
-<!ELEMENT env-entry-value (#PCDATA)>
-
-<!--
-The exclude list element defines a set of methods which the Assembler marks to
-be uncallable. It contains one or more methods.
-
-If the method permission relation contains methods that are in the
-exclude list, the Deployer must consider those methods to be
-uncallable.
-
-Used in: assembly-descriptor
--->
-<!ELEMENT exclude-list (description?, method+)>
-
-<!--
-The field-name element specifies the name of a container managed
-field. The name must be a public field of the enterprise bean class or
-one of its superclasses.
-
-The name of the cmp-field of an entity bean with cmp-version 2.x must
-begin with a lowercase letter. This field is accessed by methods whose
-names consists of the name of the field specified by field-name in
-which the first letter is uppercased, prefixed by "get" or "set".
-
-Used in: cmp-field
-
-Example:
-
-
-	<field-name>firstName</field-Name>
-
--->
-<!ELEMENT field-name (#PCDATA)>
-
-<!--
-The home element contains the fully-qualified name of the enterprise
-bean's home interface.
-
-Used in: ejb-ref, entity, session
-
-Example:
-
-<home>com.aardvark.payroll.PayrollHome</home>
--->
-<!ELEMENT home (#PCDATA)>
-
-<!--
-The large-icon element contains the name of a file
-containing a large (32 x 32) icon image. The file
-name is a relative path within the enterprise bean's
-ejb-jar file.
-
-The image may be either in the JPEG or GIF format.
-The icon can be used by tools.
-
-Used in: ejb-jar, entity, message-driven, session
-
-Example:
-
-<large-icon>employee-service-icon32x32.jpg</large-icon>
--->
-<!ELEMENT large-icon (#PCDATA)>
-
-<!--
-
-The local element contains the fully-qualified name of the
-enterprise bean's local interface.
-
-Used in: ejb-local-ref, entity, session
-
--->
-<!ELEMENT local (#PCDATA)>
-
-<!--
-
-The local-home element contains the fully-qualified name of the
-enterprise bean's local home interface.
-
-Used in: ejb-local-ref, entity, session
--->
-<!ELEMENT local-home (#PCDATA)>
-
-<!--
-
-The message-driven element declares a message-driven bean. The
-declaration consists of:
-
-	- an optional description
-	- an optional display name
-	- an optional small icon file name
-	- an optional large icon file name
-	- a name assigned to the enterprise bean in
-	  the deployment descriptor
-	- the message-driven bean's implementation class
-	- the message-driven bean's transaction management type
-	- an optional declaration of the message-driven bean's
-	  message selector
-	- an optional declaration of the
-	  acknowledgment mode for the message-driven bean
-	  if bean-managed transaction demarcation is used
-	- an optional declaration of the
-	  intended destination type of the message-driven bean
-	- an optional declaration of the bean's environment entries
-	- an optional declaration of the bean's EJB references
-	- an optional declaration of the bean's local EJB references
-	- an optional declaration of the security
-	  identity to be used for the execution of the bean's methods
-	- an optional declaration of the bean's resource manager
-	  connection factory references
-	- an optional declaration of the bean's resource
-          environment references.
-
-Used in: enterprise-beans
--->
-<!ELEMENT message-driven (description?, display-name?, small-icon?,
-		large-icon?, ejb-name, ejb-class, transaction-type,
-		message-selector?, acknowledge-mode?,
-		message-driven-destination?, env-entry*, ejb-ref*,
-		ejb-local-ref*, security-identity?, resource-ref*,
-		resource-env-ref*)>
-
-<!--
-The message-driven-destination element provides advice to the Deployer
-as to whether a message-driven bean is intended for a Queue or a
-Topic. The declaration consists of: the type of the message-driven
-bean's intended destination and an optional declaration of whether a
-durable or non-durable subscription should be used if the
-destination-type is javax.jms.Topic.
-
-Used in: message-driven
--->
-<!ELEMENT message-driven-destination (destination-type,
-subscription-durability?)>
-
-<!--
-The message-selector element is used to specify the JMS message
-selector to be used in determining which messages a message-driven
-bean is to receive.
-
-Example:
-<message-selector>JMSType = `car' AND color = `blue' AND weight &gt; 2500
-</message-selector>
-
-Used in: message-driven
--->
-<!ELEMENT message-selector (#PCDATA)>
-
-<!--
-
-The method element is used to denote a method of an enterprise
-bean's home or component interface, or, in the case of a message-driven
-bean, the bean's onMessage method, or a set of methods. The ejb-name
-element must be the name of one of the enterprise beans declared in
-the deployment descriptor; the optional method-intf element allows to
-distinguish between a method with the same signature that is multiply
-defined across in both the home and component interfaces; the
-method-name element specifies the method name; and the optional
-method-params elements identify a single method among multiple methods
-with an overloaded method name.
-
-There are three possible styles of the method element syntax:
-
-1.
-<method>
-    <ejb-name>EJBNAME</ejb-name>
-    <method-name>*</method-name>
-</method>
-
-   This style is used to refer to all the methods of the specified
-   enterprise bean's home and component interfaces.
-
-2.
-<method>
-    <ejb-name>EJBNAME</ejb-name>
-    <method-name>METHOD</method-name>
-</method>>
-
-   This style is used to refer to the specified method of the
-   specified enterprise bean. If there are multiple methods with
-   the same overloaded name, the element of this style refers to
-   all the methods with the overloaded name.
-
-
-3.
-<method>
-    <ejb-name>EJBNAME</ejb-name>
-    <method-name>METHOD</method-name>
-    <method-params>
-        <method-param>PARAM-1</method-param>
-        <method-param>PARAM-2</method-param>
-        ...
-        <method-param>PARAM-n</method-param>
-    </method-params>
-<method>
-
-
-   This style is used to refer to a single method within a set of
-   methods with an overloaded name. PARAM-1 through PARAM-n are the
-   fully-qualified Java types of the method's input parameters (if
-   the method has no input arguments, the method-params element
-   contains no method-param elements). Arrays are specified by the
-   array element's type, followed by one or more pair of square
-   brackets (e.g. int[][]).
-
-
-Used in: container-transaction, exclude-list, method-permission
-
-Examples:
-
-Style 1: The following method element refers to all the methods of
-the EmployeeService bean's home and component interfaces:
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-name>*</method-name>
-</method>
-
-Style 2: The following method element refers to all the create
-methods of the EmployeeService bean's home interface(s).
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-name>create</method-name>
-</method>
-
-
-Style 3: The following method element refers to the
-create(String firstName, String LastName) method of the
-EmployeeService bean's home interface(s).
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-name>create</method-name>
-    <method-params>
-        <method-param>java.lang.String</method-param>
-        <method-param>java.lang.String</method-param>
-    </method-params>
-</method>
-
-
-The following example illustrates a Style 3 element with
-more complex parameter types. The method
-foobar(char s, int i, int[] iar, mypackage.MyClass mycl,
-mypackage.MyClass[][] myclaar) would be specified as:
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-name>foobar</method-name>
-    <method-params>
-        <method-param>char</method-param>
-        <method-param>int</method-param>
-        <method-param>int[]</method-param>
-        <method-param>mypackage.MyClass</method-param>
-        <method-param>mypackage.MyClass[][]</method-param>
-    </method-params>
-</method>
-
-
-The optional method-intf element can be used when it becomes necessary
-to differentiate between a method that is multiply defined across the
-enterprise bean's home and component interfaces with the same name and
-signature.
-
-
-For example, the method element
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-intf>Remote</method-intf>
-    <method-name>create</method-name>
-    <method-params>
-        <method-param>java.lang.String</method-param>
-        <method-param>java.lang.String</method-param>
-    </method-params>
-</method>
-
-
-can be used to differentiate the create(String, String) method defined
-in the remote interface from the create(String, String) method defined
-in the remote home interface, which would be defined as
-
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-intf>Home</method-intf>
-    <method-name>create</method-name>
-    <method-params>
-        <method-param>java.lang.String</method-param>
-        <method-param>java.lang.String</method-param>
-    </method-params>
-</method>
-
-and the create method that is defined in the local home interface
-which would be defined as
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-intf>LocalHome</method-intf>
-    <method-name>create</method-name>
-    <method-params>
-        <method-param>java.lang.String</method-param>
-        <method-param>java.lang.String</method-param>
-    </method-params>
-</method>
-
-
-The method-intf element can be used with all three Styles of the
-method element usage. For example, the following method element
-example could be used to refer to all the methods of the
-EmployeeService bean's remote home interface.
-
-
-<method>
-    <ejb-name>EmployeeService</ejb-name>
-    <method-intf>Home</method-intf>
-    <method-name>*</method-name>
-</method>
-
--->
-<!ELEMENT method (description?, ejb-name, method-intf?, method-name,
-method-params?)>
-
-<!--
-
-The method-intf element allows a method element to differentiate
-between the methods with the same name and signature that are multiply
-defined across the component and home interfaces (e.g, in both an
-enterprise bean's remote and local interfaces; in both an enterprise bean's
-home and remote interfaces, etc.)
-
-The method-intf element must be one of the following:
-
-	<method-intf>Home</method-intf>
-	<method-intf>Remote</method-intf>
-	<method-intf>LocalHome</method-intf>
-	<method-intf>Local</method-intf>
-
-Used in: method, query-method
--->
-<!ELEMENT method-intf (#PCDATA)>
-
-<!--
-The method-name element contains a name of an enterprise bean method
-or the asterisk (*) character. The asterisk is used when the element
-denotes all the methods of an enterprise bean's component and home
-interfaces.
-
-Used in: method, query-method
--->
-<!ELEMENT method-name (#PCDATA)>
-
-<!--
-The method-param element contains the fully-qualified Java type name
-of a method parameter.
-
-Used in: method-params
--->
-<!ELEMENT method-param (#PCDATA)>
-
-<!--
-The method-params element contains a list of the fully-qualified Java
-type names of the method parameters.
-
-Used in: method, query-method
--->
-<!ELEMENT method-params (method-param*)>
-
-<!--
-
-The method-permission element specifies that one or more security
-roles are allowed to invoke one or more enterprise bean methods. The
-method-permission element consists of an optional description, a list
-of security role names or an indicator to state that the method is
-unchecked for authorization, and a list of method elements.
-
-The security roles used in the method-permission element must be
-defined in the security-role element of the deployment descriptor, and
-the methods must be methods defined in the enterprise bean's component
-and/or home interfaces.
-
-
-Used in: assembly-descriptor
--->
-<!ELEMENT method-permission (description?, (role-name+|unchecked), method+)>
-
-<!--
-The multiplicity element describes the multiplicity of the role that
-participates in a relation.
-
-The multiplicity element must be one of the two following:
-
-	<multiplicity>One</multiplicity>
-	<multiplicity>Many</multiplicity>
-
-Used in: ejb-relationship-role
--->
-<!ELEMENT multiplicity (#PCDATA)>
-
-<!--
-The persistence-type element specifies an entity bean's persistence
-management type.
-
-The persistence-type element must be one of the two following:
-
-	<persistence-type>Bean</persistence-type>
-	<persistence-type>Container</persistence-type>
-
-Used in: entity
--->
-<!ELEMENT persistence-type (#PCDATA)>
-
-<!--
-The prim-key-class element contains the fully-qualified name of an
-entity bean's primary key class.
-
-If the definition of the primary key class is deferred to deployment
-time, the prim-key-class element should specify java.lang.Object.
-
-Used in: entity
-
-Examples:
-
-	<prim-key-class>java.lang.String</prim-key-class>
-
-	<prim-key-class>com.wombat.empl.EmployeeID</prim-key-class>
-
-	<prim-key-class>java.lang.Object</prim-key-class>
-
--->
-<!ELEMENT prim-key-class (#PCDATA)>
-
-<!--
-The primkey-field element is used to specify the name of the primary
-key field for an entity with container-managed persistence.
-
-The primkey-field must be one of the fields declared in the cmp-field
-element, and the type of the field must be the same as the primary key
-type.
-
-The primkey-field element is not used if the primary key maps to
-multiple container-managed fields (i.e. the key is a compound key). In
-this case, the fields of the primary key class must be public, and
-their names must correspond to the field names of the entity bean
-class that comprise the key.
-
-Used in: entity
-
-Example:
-
-	<primkey-field>EmployeeId</primkey-field>
-
--->
-<!ELEMENT primkey-field (#PCDATA)>
-
-<!--
-The query element is used to specify a finder or select query. It
-contains
-	- an optional description of the query
-	- the specification of the finder or select
-	  method it is used by
-        - an optional indicator which specifies how the abstract
-          schema type instance(s) must be mapped when results are
-          returned.
-    	- the EJB QL query string that defines the query.
-
-Queries that are expressible in EJB QL must use the ejb-ql element to
-specify the query. If a query is not expressible in EJB QL, the
-description element should be used to describe the semantics of the
-query and the ejb-ql element should be empty.
-
-The result-type-mapping is an optional element. It can only be present
-when the query-method describes an ejbSelect query. The default value
-for the result-type-mapping element is "Local".
-
-
-Used in: entity
--->
-<!ELEMENT query (description?, query-method, result-type-mapping?, ejb-ql)>
-
-<!--
-The query-method element is used to specify the method for a finder or
-select query.
-
-The method-name element specifies the name of a finder or select
-method in the entity bean's implementation class.
-
-Each method-param must be defined for a query-method using the
-method-params element.
-
-Used in: query
-
-Example:
-
-<query>
-    <description>Method finds large orders</description>
-    <query-method>
-        <method-name>findLargeOrders</method-name>
-        <method-params></method-params>
-    </query-method>
-    <ejb-ql>SELECT ENTITY(o) FROM Order o WHERE o.amount &gt; 1000</ejb-ql>
-</query>
-
--->
-<!ELEMENT query-method (method-name, method-intf?, method-params)>
-
-<!--
-The reentrant element specifies whether an entity bean is reentrant or
-not.
-
-The reentrant element must be one of the two following:
-
-	<reentrant>True</reentrant>
-	<reentrant>False</reentrant>
-
-Used in: entity
--->
-<!ELEMENT reentrant (#PCDATA)>
-
-<!--
-
-The relationship-role-source element designates the source of a role
-that participates in a relationship. A relationship-role-source
-element uniquely identifies an entity bean.
-
-Used in: ejb-relationship-role
--->
-<!ELEMENT relationship-role-source (description?, ejb-name)>
-
-<!--
-The relationships element describes the relationships in which
-entity beans with container managed persistence participate. The
-relationships element contains an optional description; and a list of
-ejb-relation elements, which specify the container managed
-relationships.
-
-
-Used in: ejb-jar
--->
-<!ELEMENT relationships (description?, ejb-relation+)>
-
-<!--
-The remote element contains the fully-qualified name of the enterprise
-bean's remote interface.
-
-Used in: ejb-ref, entity, session
-
-Example:
-
-<remote>com.wombat.empl.EmployeeService</remote>
--->
-<!ELEMENT remote (#PCDATA)>
-
-<!--
-The res-auth element specifies whether the enterprise bean code signs
-on programmatically to the resource manager, or whether the Container
-will sign on to the resource manager on behalf of the enterprise bean. In the
-latter case, the Container uses information that is supplied by the
-Deployer.
-
-The value of this element must be one of the two following:
-
-	<res-auth>Application</res-auth>
-	<res-auth>Container</res-auth>
-
-Used in: resource-ref
--->
-<!ELEMENT res-auth (#PCDATA)>
-
-<!--
-The res-ref-name element specifies the name of a resource manager
-connection factory reference.  The name is a JNDI name relative to the
-java:comp/env context.  The name must be unique within an enterprise bean.
-
-Used in: resource-ref
--->
-<!ELEMENT res-ref-name (#PCDATA)>
-
-<!--
-The res-sharing-scope element specifies whether connections obtained
-through the given resource manager connection factory reference can be
-shared. The value of this element, if specified, must be one of the
-two following:
-
-	<res-sharing-scope>Shareable</res-sharing-scope>
-	<res-sharing-scope>Unshareable</res-sharing-scope>
-
-The default value is Shareable.
-
-Used in: resource-ref
--->
-<!ELEMENT res-sharing-scope (#PCDATA)>
-
-<!--
-The res-type element specifies the type of the data source. The type
-is specified by the fully qualified Java language class or interface
-expected to be implemented by the data source.
-
-Used in: resource-ref
--->
-<!ELEMENT res-type (#PCDATA)>
-
-<!--
-The resource-env-ref element contains a declaration of an enterprise bean's
-reference to an administered object associated with a resource
-in the enterprise bean's environment.  It consists of an optional
-description, the resource environment reference name, and an
-indication of the resource environment reference type expected by
-the enterprise bean code.
-
-Used in: entity, message-driven, session
-
-Example:
-
-<resource-env-ref>
-    <resource-env-ref-name>jms/StockQueue</resource-env-ref-name>
-    <resource-env-ref-type>javax.jms.Queue</resource-env-ref-type>
-</resource-env-ref>
--->
-<!ELEMENT resource-env-ref (description?, resource-env-ref-name,
-		resource-env-ref-type)>
-
-<!--
-The resource-env-ref-name element specifies the name of a resource
-environment reference; its value is the environment entry name used in
-the enterprise bean code.  The name is a JNDI name relative to the
-java:comp/env context and must be unique within an enterprise bean.
-
-Used in: resource-env-ref
--->
-<!ELEMENT resource-env-ref-name (#PCDATA)>
-
-<!--
-The resource-env-ref-type element specifies the type of a resource
-environment reference.  It is the fully qualified name of a Java
-language class or interface.
-
-Used in: resource-env-ref
--->
-<!ELEMENT resource-env-ref-type (#PCDATA)>
-
-<!--
-The resource-ref element contains a declaration of an enterprise bean's
-reference to an external resource. It consists of an optional
-description, the resource manager connection factory reference name,
-the indication of the resource manager connection factory type
-expected by the enterprise bean code, the type of authentication
-(Application or Container), and an optional specification of the
-shareability of connections obtained from the resource (Shareable or
-Unshareable).
-
-Used in: entity, message-driven, session
-
-Example:
-
-    <resource-ref>
-	<res-ref-name>jdbc/EmployeeAppDB</res-ref-name>
-	<res-type>javax.sql.DataSource</res-type>
-	<res-auth>Container</res-auth>
-	<res-sharing-scope>Shareable</res-sharing-scope>
-    </resource-ref>
--->
-<!ELEMENT resource-ref (description?, res-ref-name, res-type, res-auth,
-		res-sharing-scope?)>
-
-<!--
-
-The result-type-mapping element designates the mapping of the return
-value(s) of an select query.
-
-When the result type of a select query is an abstract schema type, the
-value of this element determines whether the select
-query returns remote or local entity objects.
-
-The result-type-mapping element must have one of the following:
-
-        <result-type-mapping>Local</result-type-mapping>
-        <result-type-mapping>Remote</result-type-mapping>
-
-Used in: query
--->
-<!ELEMENT result-type-mapping (#PCDATA)>
-
-<!--
-The role-link element is a reference to a defined security role. The
-role-link element must contain the name of one of the security roles
-defined in the security-role elements.
-
-Used in: security-role-ref
--->
-<!ELEMENT role-link (#PCDATA)>
-
-<!--
-The role-name element contains the name of a security role.
-
-The name must conform to the lexical rules for an NMTOKEN.
-
-Used in: method-permission, run-as, security-role, security-role-ref
--->
-<!ELEMENT role-name (#PCDATA)>
-
-<!--
-The run-as element specifies the run-as identity to be used for the
-execution of the enterprise bean. It contains an optional description, and
-the name of a security role.
-
-Used in: security-identity
--->
-<!ELEMENT run-as (description?, role-name)>
-
-<!--
-
-The security-identity element specifies whether the caller's
-security identity is to be used for the execution of the methods of
-the enterprise bean or whether a specific run-as identity is to be
-used. It contains an optional description and a specification of the
-security identity to be used.
-
-Used in: entity, message-driven, session
--->
-<!ELEMENT security-identity (description?, (use-caller-identity|run-as))>
-
-<!--
-The security-role element contains the definition of a security
-role. The definition consists of an optional description of the
-security role, and the security role name.
-
-Used in: assembly-descriptor
-
-Example:
-
-    <security-role>
-	<description>
-	    This role includes all employees who are authorized
-	    to access the employee service application.
-	</description>
-	<role-name>employee</role-name>
-    </security-role>
--->
-<!ELEMENT security-role (description?, role-name)>
-
-<!--
-The security-role-ref element contains the declaration of a security
-role reference in the enterprise bean's code. The declaration consists
-of an optional description, the security role name used in the code,
-and an optional link to a security role. If the security role is not
-specified, the Deployer must choose an appropriate security role.
-
-The value of the role-name element must be the String used as the
-parameter to the EJBContext.isCallerInRole(String roleName) method
-or the HttpServletRequest.isUserInRole(String role) method.
-
-Used in: entity, session
-
--->
-<!ELEMENT security-role-ref (description?, role-name, role-link?)>
-
-<!--
-The session element declares an session bean. The declaration consists
-of:
-	- an optional description
-	- an optional display name
-	- an optional small icon file name
-	- an optional large icon file name
-	- a name assigned to the enterprise bean
-	  in the deployment description
-	- the names of the session bean's remote home and
-	  remote interfaces, if any
-	- the names of the session bean's local home and
-	  local interfaces, if any
-	- the session bean's implementation class
-	- the session bean's state management type
-	- the session bean's transaction management type
-	- an optional declaration of the bean's environment entries
-	- an optional declaration of the bean's EJB references
-	- an optional declaration of the bean's local EJB references
-	- an optional declaration of the security role references
-	- an optional declaration of the security identity to be
-          used for the execution of the bean's methods
-	- an optional declaration of the bean's resource manager
-	  connection factory references
-	- an optional declaration of the bean's resource environment
-	  references.
-
-The elements that are optional are "optional" in the sense that they
-are omitted when if lists represented by them are empty.
-
-Either both the local-home and the local elements or both the
-home and the remote elements must be specified for the session bean.
-
-Used in: enterprise-beans
--->
-<!ELEMENT session (description?, display-name?, small-icon?,
-large-icon?, ejb-name, home?, remote?, local-home? , local?,
-ejb-class, session-type, transaction-type, env-entry*, ejb-ref*,
-ejb-local-ref*, security-role-ref*, security-identity?, resource-ref*,
-resource-env-ref*)>
-
-<!--
-The session-type element describes whether the session bean is a
-stateful session or stateless session.
-
-The session-type element must be one of the two following:
-
-	<session-type>Stateful</session-type>
-	<session-type>Stateless</session-type>
--->
-<!ELEMENT session-type (#PCDATA)>
-
-<!--
-The small-icon element contains the name of a file
-containing a small (16 x 16) icon image. The file
-name is a relative path within the enterprise bean's
-ejb-jar file.
-
-The image may be either in the JPEG or GIF format.
-The icon can be used by tools.
-
-Used in: ejb-jar, entity, message-driven, session
-
-Example:
-
-<small-icon>employee-service-icon16x16.jpg</small-icon>
--->
-<!ELEMENT small-icon (#PCDATA)>
-
-<!--
-The subscription-durability element specifies whether a JMS topic
-subscription is intended to be durable or nondurable.
-
-The subscription-durability element must be one of the two following:
-
-	<subscription-durability>Durable</subscription-durability>
-	<subscription-durability>NonDurable</subscription-durability>
-
-Used in: message-driven-destination
--->
-<!ELEMENT subscription-durability (#PCDATA)>
-
-<!--
-The trans-attribute element specifies how the container must manage
-the transaction boundaries when delegating a method invocation to an
-enterprise bean's business method.
-
-The value of trans-attribute must be one of the following:
-
-
-	<trans-attribute>NotSupported</trans-attribute>
-	<trans-attribute>Supports</trans-attribute>
-	<trans-attribute>Required</trans-attribute>
-	<trans-attribute>RequiresNew</trans-attribute>
-	<trans-attribute>Mandatory</trans-attribute>
-	<trans-attribute>Never</trans-attribute>
-
-Used in: container-transaction
--->
-<!ELEMENT trans-attribute (#PCDATA)>
-
-<!--
-The transaction-type element specifies an enterprise bean's
-transaction management type.
-
-The transaction-type element must be one of the two following:
-
-	<transaction-type>Bean</transaction-type>
-	<transaction-type>Container</transaction-type>
-
-Used in: message-driven, session
--->
-<!ELEMENT transaction-type (#PCDATA)>
-
-<!--
-The unchecked element specifies that a method is not checked for authorization
-by the container prior to invocation of the method.
-
-Used in: method-permission
--->
-<!ELEMENT unchecked EMPTY>
-
-<!--
-
-The use-caller-identity element specifies that the caller's security
-identity be used as the security identity for the execution of the
-enterprise bean's methods.
-
-Used in: security-identity
--->
-<!ELEMENT use-caller-identity EMPTY>
-
-<!--
-The ID mechanism is to allow tools that produce additional deployment
-information (i.e., information beyond the standard deployment
-descriptor information) to store the non-standard information in a
-separate file, and easily refer from these tool-specific files to the
-information in the standard deployment descriptor.
-
-Tools are not allowed to add the non-standard information into the
-standard deployment descriptor.
--->
-
-<!ATTLIST abstract-schema-name id ID #IMPLIED>
-<!ATTLIST acknowledge-mode id ID #IMPLIED>
-<!ATTLIST assembly-descriptor id ID #IMPLIED>
-<!ATTLIST cascade-delete id ID #IMPLIED>
-<!ATTLIST cmp-field id ID #IMPLIED>
-<!ATTLIST cmp-version id ID #IMPLIED>
-<!ATTLIST cmr-field id ID #IMPLIED>
-<!ATTLIST cmr-field-name id ID #IMPLIED>
-<!ATTLIST cmr-field-type id ID #IMPLIED>
-<!ATTLIST container-transaction id ID #IMPLIED>
-<!ATTLIST description id ID #IMPLIED>
-<!ATTLIST destination-type id ID #IMPLIED>
-<!ATTLIST display-name id ID #IMPLIED>
-<!ATTLIST ejb-class id ID #IMPLIED>
-<!ATTLIST ejb-client-jar id ID #IMPLIED>
-<!ATTLIST ejb-jar id ID #IMPLIED>
-<!ATTLIST ejb-link id ID #IMPLIED>
-<!ATTLIST ejb-local-ref id ID #IMPLIED>
-<!ATTLIST ejb-name id ID #IMPLIED>
-<!ATTLIST ejb-ql id ID #IMPLIED>
-<!ATTLIST ejb-ref id ID #IMPLIED>
-<!ATTLIST ejb-ref-name id ID #IMPLIED>
-<!ATTLIST ejb-ref-type id ID #IMPLIED>
-<!ATTLIST ejb-relation id ID #IMPLIED>
-<!ATTLIST ejb-relation-name id ID #IMPLIED>
-<!ATTLIST ejb-relationship-role id ID #IMPLIED>
-<!ATTLIST ejb-relationship-role-name id ID #IMPLIED>
-<!ATTLIST enterprise-beans id ID #IMPLIED>
-<!ATTLIST entity id ID #IMPLIED>
-<!ATTLIST env-entry id ID #IMPLIED>
-<!ATTLIST env-entry-name id ID #IMPLIED>
-<!ATTLIST env-entry-type id ID #IMPLIED>
-<!ATTLIST env-entry-value id ID #IMPLIED>
-<!ATTLIST exclude-list id ID #IMPLIED>
-<!ATTLIST field-name id ID #IMPLIED>
-<!ATTLIST home id ID #IMPLIED>
-<!ATTLIST large-icon id ID #IMPLIED>
-<!ATTLIST local id ID #IMPLIED>
-<!ATTLIST local-home id ID #IMPLIED>
-<!ATTLIST message-driven id ID #IMPLIED>
-<!ATTLIST message-driven-destination id ID #IMPLIED>
-<!ATTLIST message-selector id ID #IMPLIED>
-<!ATTLIST method id ID #IMPLIED>
-<!ATTLIST method-intf id ID #IMPLIED>
-<!ATTLIST method-name id ID #IMPLIED>
-<!ATTLIST method-param id ID #IMPLIED>
-<!ATTLIST method-params id ID #IMPLIED>
-<!ATTLIST method-permission id ID #IMPLIED>
-<!ATTLIST multiplicity id ID #IMPLIED>
-<!ATTLIST persistence-type id ID #IMPLIED>
-<!ATTLIST prim-key-class id ID #IMPLIED>
-<!ATTLIST primkey-field id ID #IMPLIED>
-<!ATTLIST query id ID #IMPLIED>
-<!ATTLIST query-method id ID #IMPLIED>
-<!ATTLIST reentrant id ID #IMPLIED>
-<!ATTLIST relationship-role-source id ID #IMPLIED>
-<!ATTLIST relationships id ID #IMPLIED>
-<!ATTLIST remote id ID #IMPLIED>
-<!ATTLIST res-auth id ID #IMPLIED>
-<!ATTLIST res-ref-name id ID #IMPLIED>
-<!ATTLIST res-sharing-scope id ID #IMPLIED>
-<!ATTLIST res-type id ID #IMPLIED>
-<!ATTLIST resource-env-ref id ID #IMPLIED>
-<!ATTLIST resource-env-ref-name id ID #IMPLIED>
-<!ATTLIST resource-env-ref-type id ID #IMPLIED>
-<!ATTLIST resource-ref id ID #IMPLIED>
-<!ATTLIST result-type-mapping id ID #IMPLIED>
-<!ATTLIST role-link id ID #IMPLIED>
-<!ATTLIST role-name id ID #IMPLIED>
-<!ATTLIST run-as id ID #IMPLIED>
-<!ATTLIST security-identity id ID #IMPLIED>
-<!ATTLIST security-role id ID #IMPLIED>
-<!ATTLIST security-role-ref id ID #IMPLIED>
-<!ATTLIST session id ID #IMPLIED>
-<!ATTLIST session-type id ID #IMPLIED>
-<!ATTLIST small-icon id ID #IMPLIED>
-<!ATTLIST subscription-durability id ID #IMPLIED>
-<!ATTLIST trans-attribute id ID #IMPLIED>
-<!ATTLIST transaction-type id ID #IMPLIED>
-<!ATTLIST unchecked id ID #IMPLIED>
-<!ATTLIST use-caller-identity id ID #IMPLIED>