torquebox-console 0.2.5 → 0.3.0

data/vendor/bundle/ruby/1.8/gems/rake-10.0.3/doc/release_notes/rake-0.8.6.rdoc

@@ -1,55 +0,0 @@
-= Rake 0.8.6 Released
-
-Rake version 0.8.5 introduced greatly improved support for executing
-commands on Windows.  The "sh" command now has the same semantics on
-Windows that it has on Unix based platforms.
-
-Rake version 0.8.6 includes minor fixes the the RDoc generation.
-
-== Changes
-
-=== New Features / Enhancements in Version 0.8.5
-
-* Improved implementation of the Rake system command for Windows.
-  (patch from James M. Lawrence/quix)
-
-* Support for Ruby 1.9's improved system command.  (patch from James
-  M. Lawrence/quix)
-
-* Rake now includes the configured extension when invoking an
-  executable (Config::CONFIG['EXEEXT])
-
-=== Bug Fixes in Version 0.8.5
-
-* Environment variable keys are now correctly cased (it matters in
-  some implementations).
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence/quix
-* Luis Lavena
-
--- Jim Weirich

data/vendor/bundle/ruby/1.8/gems/rake-10.0.3/doc/release_notes/rake-0.8.7.rdoc

@@ -1,55 +0,0 @@
-= Rake 0.8.7 Released
-
-Rake version 0.8.5 introduced greatly improved support for executing
-commands on Windows.  The "sh" command now has the same semantics on
-Windows that it has on Unix based platforms.
-
-Rake version 0.8.6 includes minor fixes the the RDoc generation.
-Rake version 0.8.7 includes a minor fix for JRuby running on windows.
-
-== Changes
-
-=== New Features / Enhancements in Version 0.8.5
-
-* Improved implementation of the Rake system command for Windows.
-  (patch from James M. Lawrence/quix)
-
-* Support for Ruby 1.9's improved system command.  (patch from James
-  M. Lawrence/quix)
-
-* Rake now includes the configured extension when invoking an
-  executable (Config::CONFIG['EXEEXT])
-
-=== Bug Fixes in Version 0.8.5
-
-* Environment variable keys are now correctly cased (it matters in
-  some implementations).
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* Charles Nutter
-
--- Jim Weirich

data/vendor/bundle/ruby/1.8/gems/rake-10.0.3/doc/release_notes/rake-0.9.0.rdoc

@@ -1,112 +0,0 @@
-= Rake 0.9.0 Released
-
-Rake version 0.9.0 has a number of bug fixes and enhancments (see
-below for more details).  Additionally, the internals have be slightly
-restructured and improved.
-
-== Changes
-
-=== New Features / Enhancements / Bug Fixes in Version 0.9.0
-
-* Rake now warns when the deprecated :needs syntax used (and suggests
-  the proper syntax in the warning).
-
-* Moved Rake DSL commands to top level ruby object 'main'.  Rake DSL
-  commands are no longer private methods in Object. (Suggested by
-  James M. Lawrence/quix)
-
-* Rake now uses case-insensitive comparisons to find the Rakefile on Windows.
-  Based on patch by Roger Pack.
-
-* Rake now requires (instead of loads) files in the test task.  Patch by Cezary
-  Baginski.
-
-* Fixed typos.  Patches by Sean Scot August Moon and R.T. Lechow.
-
-* Rake now prints the Rakefile directory only when it's different from the
-  current directory.  Patch by Alex Chaffee.
-
-* Improved rakefile_location discovery on Windows.  Patch by James Tucker.
-
-* Rake now recognizes "Windows Server" as a windows system.  Patch by Matthias
-  Lüdtke
-
-* Rake::RDocTask is deprecated.  Use RDoc::Task from RDoc 2.4.2+ (require
-  'rdoc/task')
-
-* Rake::GemPackageTask is deprecated.  Use Gem::PackageTask (require
-  'rubygems/package_task')
-
-* Rake now outputs various messages to $stderr instead of $stdout.
-
-* Rake no longer emits warnings for Config.  Patch by Santiago Pastorino.
-
-* Removed Rake's DSL methods from the top level scope.  If you need to
-  call 'task :xzy' in your code, include Rake::DSL into your class, or
-  put the code in a Rake::DSL.environment do ... end block.
-
-* Split rake.rb into individual files.
-
-* Support for the --where (-W) flag for showing where a task is defined.
-
-* Fixed quoting in test task.
-  (http://onestepback.org/redmine/issues/show/44,
-  http://www.pivotaltracker.com/story/show/1223138)
-
-* Fixed the silent option parsing problem.
-  (http://onestepback.org/redmine/issues/show/47)
-
-* Fixed :verbose=>false flag on sh and ruby commands.
-
-* Rake command line options may be given by default in a RAKEOPT
-  environment variable.
-
-* Errors in Rake will now display the task invocation chain in effect
-  at the time of the error.
-
-* Accepted change by warnickr to not expand test patterns in shell
-  (allowing more files in the test suite).
-
-* Fixed that file tasks did not perform prereq lookups in scope
-  (Redmine #57).
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
-
--- Jim Weirich

data/vendor/bundle/ruby/1.8/gems/rake-10.0.3/doc/release_notes/rake-0.9.1.rdoc

@@ -1,52 +0,0 @@
-= Rake 0.9.1 Released
-
-Rake version 0.9.1 has a number of bug fixes and enhancments (see
-below for more details).  Additionally, the internals have be slightly
-restructured and improved.
-
-== Changes
-
-Rake 0.9.1 adds back the global DSL methods, but with deprecation
-messages.  This allows Rake 0.9.1 to be used with older rakefiles with
-warning messages.
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
-
--- Jim Weirich

data/vendor/bundle/ruby/1.8/gems/rake-10.0.3/doc/release_notes/rake-0.9.2.2.rdoc

@@ -1,55 +0,0 @@
-= Rake 0.9.3 Released
-
-Rake version 0.9.3 is mainly bug fixes.
-
-== Changes
-
-* The rake test loader now removes arguments it has processed.  Issue #51
-* Rake::TaskArguments now responds to #values_at
-* RakeFileUtils.verbose_flag = nil silences output the same as 0.8.7
-* Rake tests are now directory-independent
-* Rake tests are no longer require flexmock
-* Commands constant is no longer polluting top level namespace.
-* Show only the interesting portion of the backtrace by default (James M. Lawrence).
-* Added --reduce-compat option to remove backward compatible DSL hacks (James M. Lawrence).
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
-
--- Jim Weirich

data/vendor/bundle/ruby/1.8/gems/rake-10.0.3/doc/release_notes/rake-0.9.2.rdoc

@@ -1,49 +0,0 @@
-= Rake 0.9.2 Released
-
-Rake version 0.9.2 has a few small fixes.  See below for details.
-
-== Changes
-
-* Support for Ruby 1.8.6 was fixed.
-* Global DSL warnings now honor --no-deprecate
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://rake.rubyforge.org/
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* James M. Lawrence (quix)
-* Roger Pack
-* Cezary Baginski
-* Sean Scot August Moon
-* R.T. Lechow
-* Alex Chaffee
-* James Tucker
-* Matthias Lüdtke
-* Santiago Pastorino
-
-Also, bit thanks to Eric Hodel for assisting with getting this release
-out the door (where "assisting" includes, but is not by any means
-limited to, "pushing" me to get it done).
-
--- Jim Weirich

data/vendor/bundle/ruby/1.8/gems/rake-10.0.3/doc/release_notes/rake-0.9.3.rdoc

@@ -1,102 +0,0 @@
-= Rake 0.9.3 Released
-
-Rake version 0.9.3 contains some new, backwards compatible features and
-a number of bug fixes.
-
-== Changes
-
-=== New Features
-
-* Multitask tasks now use a thread pool. Use -j to limit the number of
-  available threads.
-
-* Use -m to turn regular tasks into multitasks (use at your own risk).
-
-* You can now do "Rake.add_rakelib 'dir'" in your Rakefile to
-  programatically add rake task libraries.
-
-* You can specific backtrace suppression patterns (see
-  --supress-backtrace)
-
-* Directory tasks can now take prerequisites and actions
-
-* Use --backtrace to request a full backtrace without the task trace.
-
-* You can say "--backtrace=stdout" and "--trace=stdout" to route trace
-  output to standard output rather than standard error.
-
-* Optional 'phony' target (enable with 'require 'rake/phony'") for
-  special purpose builds.
-
-* Task#clear now clears task comments as well as actions and
-  prerequisites. Task#clear_comment will specifically target comments.
-
-* The --all option will force -T and -D to consider all the tasks,
-  with and without descriptions.
-
-=== Bug Fixes
-
-* Semi-colons in windows rakefile paths now work.
-
-* Improved Control-C support when invoking multiple test suites.
-
-* egrep method now reads files in text mode (better support for
-  Windows)
-
-* Better deprecation line number reporting.
-
-* The -W option now works with all tasks, whether they have a
-  description or not.
-
-* File globs in rake should not be sorted alphabetically, independent
-  of file system and platform.
-
-* Numerous internal improvements.
-
-* Documentation typos and fixes.
-
-== What is Rake
-
-Rake is a build tool similar to the make program in many ways. But
-instead of cryptic make recipes, Rake uses standard Ruby code to
-declare tasks and dependencies. You have the full power of a modern
-scripting language built right into your build tool.
-
-== Availability
-
-The easiest way to get and install rake is via RubyGems ...
-
-  gem install rake    (you may need root/admin privileges)
-
-Otherwise, you can get it from the more traditional places:
-
-Home Page:: http://github.com/jimweirich/rake
-Download::  http://rubyforge.org/project/showfiles.php?group_id=50
-GitHub::    git://github.com/jimweirich/rake.git
-
-== Thanks
-
-As usual, it was input from users that drove a alot of these changes. The
-following people either contributed patches, made suggestions or made
-otherwise helpful comments.  Thanks to ...
-
-* Aaron Patterson
-* Dylan Smith
-* Jo Liss
-* Jonas Pfenniger
-* Kazuki Tsujimoto
-* Michael Bishop
-* Michael Elufimov
-* NAKAMURA Usaku
-* Ryan Davis
-* Sam Grönblom
-* Sam Phippen
-* Sergio Wong
-* Tay Ray Chuan
-* grosser
-* quix
-
-Also, many thanks to Eric Hodel for assisting with getting this release
-out the door.
-
--- Jim Weirich