tmail 1.2.1 → 1.2.2

data/log/Testlog.txt

@@ -0,0 +1,114 @@
+= Solo Test @ Sun Feb 10 17:10:47 -0500 2008
+
+TEST FILE                        TESTS    ASSERTIONS  FAILURES    ERRORS   
+test/test_utils.rb                 3          3          0          0        [PASS]
+test/test_attachments.rb           3          4          0          0        [PASS]
+test/test_encode.rb                1         26          0          0        [PASS]
+test/test_mbox.rb                  9         59          0          0        [PASS]
+test/test_helper.rb                0          0          0          0        [PASS]
+test/test_header.rb               67        312          1          0        [FAIL]
+test/test_base64.rb                3       1430          0          0        [PASS]
+test/test_address.rb              29       1686          0          1        [FAIL]
+test/test_mail.rb                 44        209          0          0        [PASS]
+test/test_scanner.rb               3        117          0          0        [PASS]
+test/test_port.rb                 31        118          0          0        [PASS]
+test/test_quote.rb                11         11          0          0        [PASS]
+TOTAL                            204       3975          1          1
+
+-- Failures and Errors --
+
+Loaded suite test/test_header
+Started
+..F................................................................
+Finished in 0.065895 seconds.
+
+  1) Failure:
+test_ATTRS(ContentDispositionHeaderTester)
+    [test/test_header.rb:825:in `_test_raw_iso2022jp'
+     test/test_header.rb:756:in `test_ATTRS']:
+<"attachment"> expected but was
+<nil>.
+
+67 tests, 312 assertions, 1 failures, 0 errors
+Loaded suite test/test_address
+Started
+...............E.............
+Finished in 0.120607 seconds.
+
+  1) Error:
+test_parse__rawjp(TestAddress):
+TMail::SyntaxError: parse error on token error
+    parser.y:379:in `on_error'
+    parser.y:379:in `_racc_yyparse_c'
+    parser.y:375:in `scan'
+    parser.y:375:in `parse_in'
+    racc/parser.rb:152:in `_racc_yyparse_c'
+    racc/parser.rb:152:in `__send__'
+    racc/parser.rb:152:in `yyparse'
+    parser.y:366:in `parse'
+    parser.y:344:in `parse'
+    ./test/../lib/tmail/address.rb:44:in `parse'
+    test/test_address.rb:90:in `validate_case__address'
+    test/test_address.rb:248:in `_test_parse__euc'
+    test/test_address.rb:237:in `test_parse__rawjp'
+
+29 tests, 1686 assertions, 0 failures, 1 errors
+
+
+= Solo Test @ Sat Feb 23 02:29:09 +1100 2008
+
+TEST FILE                        TESTS    ASSERTIONS  FAILURES    ERRORS   
+test/test_address.rb              29       1686          0          1        [FAIL]
+test/test_attachments.rb           3          4          0          0        [PASS]
+test/test_base64.rb                3       1430          0          0        [PASS]
+test/test_encode.rb                1         26          0          0        [PASS]
+test/test_header.rb               67        312          1          0        [FAIL]
+test/test_helper.rb                0          0          0          0        [PASS]
+test/test_mail.rb                 44        212          0          0        [PASS]
+test/test_mbox.rb                 12         63          0          0        [PASS]
+test/test_port.rb                 31        118          0          0        [PASS]
+test/test_quote.rb                11         11          0          0        [PASS]
+test/test_scanner.rb               3        117          0          0        [PASS]
+test/test_utils.rb                 3          3          0          0        [PASS]
+TOTAL                            207       3982          1          1
+
+-- Failures and Errors --
+
+Loaded suite test/test_address
+Started
+...............E.............
+Finished in 0.092597 seconds.
+
+  1) Error:
+test_parse__rawjp(TestAddress):
+TMail::SyntaxError: parse error on token error
+    parser.y:379:in `on_error'
+    parser.y:379:in `_racc_yyparse_c'
+    parser.y:375:in `scan'
+    parser.y:375:in `parse_in'
+    racc/parser.rb:152:in `_racc_yyparse_c'
+    racc/parser.rb:152:in `__send__'
+    racc/parser.rb:152:in `yyparse'
+    parser.y:366:in `parse'
+    parser.y:344:in `parse'
+    ./test/../lib/tmail/address.rb:84:in `parse'
+    test/test_address.rb:90:in `validate_case__address'
+    test/test_address.rb:248:in `_test_parse__euc'
+    test/test_address.rb:237:in `test_parse__rawjp'
+
+29 tests, 1686 assertions, 0 failures, 1 errors
+Loaded suite test/test_header
+Started
+..F................................................................
+Finished in 0.045103 seconds.
+
+  1) Failure:
+test_ATTRS(ContentDispositionHeaderTester)
+    [test/test_header.rb:825:in `_test_raw_iso2022jp'
+     test/test_header.rb:756:in `test_ATTRS']:
+<"attachment"> expected but was
+<nil>.
+
+67 tests, 312 assertions, 1 failures, 0 errors
+
+

data/log/Todo.txt

@@ -12,8 +12,6 @@ Please refer to the website (http://tmail.rubyforge.org/) for the current TODO l
 * allow raw JIS string in quoted word
 * unify character encoding of japanese strings in header
 * Loader -> Mailbox
-* allow this type of header: "To: Minero A. <aamine@loveruby.net>"
-* write tests of Base64 module
 * RFC2231 encode
 * allow illegal MIME param value encoding (key="=?iso-2022-jp?B?....")
 * purpose-oriented policy switching

data/meta/VERSION

@@ -0,0 +1 @@
+1.2.2 stable (2008-03-07)

data/meta/project.yaml

@@ -1,8 +1,11 @@
 ---
+project : tmail
+
 title   : TMail
 brief   : Ruby Mail Handler
 contact : Mikel Lindsaar <raasdnil AT gmail.com>
 email   : tmail-talk@rubyforge.org
+homepage: http://tmail.rubyforge.org
 authors :
   - Minero Aoki
   - Mikel Lindsaar
@@ -12,9 +15,9 @@ description:
   to compose stadards compliant emails in a
   very Ruby-way.
 
-formats: [zip, tgz, gem]
-exclude: [pkg, doc]
-
-gem_path:
-  - ext/tmail
+loadpath:
   - lib
+  - ext/tmailscanner
+
+exclude: [doc,work]
+

data/meta/unixname

@@ -0,0 +1 @@
+tmail

data/setup.rb

@@ -0,0 +1,1481 @@
+#!/usr/bin/env ruby
+# Setup.rb v3.5.0
+# Copyright (c) 2008 Minero Aoki, Trans
+#
+# This program is free software.
+# You can distribute/modify this program under the terms of
+# the GNU LGPL, Lesser General Public License version 2.1.
+
+# Need the package name, and whether to generate documentation.
+PACKAGE = File.read(Dir.glob('{.,meta/}unixname{,.txt}', File::FNM_CASEFOLD).first).strip
+GENERATE_RDOCS = true # package developer may need to deactivate
+
+require 'optparse'
+require 'rbconfig'
+
+class SetupError < StandardError; end
+
+# Typical installation procedure:
+#
+#   $ ./setup.rb
+#
+#   -- or --
+#
+#   $ ./setup.rb config
+#   $ ./setup.rb setup
+#   $ ./setup.rb install
+#
+# @all@ and @install@ may require root privileges.
+#
+# This update only works with Ruby 1.6.3 and above.
+#
+# TODO: Update shebangs on install of binaries.
+# TODO: Make cleaning more comprehensive (?)
+
+module Setup
+  Version   = "3.5.0"
+
+  Copyright = "Copyright (c) 2000,2008 Minero Aoki, Trans"
+
+  # ConfigTable stores platform information.
+
+  class ConfigTable
+
+    RBCONFIG  = ::Config::CONFIG
+
+    CONFIGFILE = '.config'
+
+    DESCRIPTIONS = [
+      [:prefix          , :path, 'path prefix of target environment'],
+      [:bindir          , :path, 'directory for commands'],
+      [:libdir          , :path, 'directory for libraries'],
+      [:datadir         , :path, 'directory for shared data'],
+      [:mandir          , :path, 'directory for man pages'],
+      [:docdir          , :path, 'Directory for documentation'],
+      [:sysconfdir      , :path, 'directory for system configuration files'],
+      [:localstatedir   , :path, 'directory for local state data'],
+      [:libruby         , :path, 'directory for ruby libraries'],
+      [:librubyver      , :path, 'directory for standard ruby libraries'],
+      [:librubyverarch  , :path, 'directory for standard ruby extensions'],
+      [:siteruby        , :path, 'directory for version-independent aux ruby libraries'],
+      [:siterubyver     , :path, 'directory for aux ruby libraries'],
+      [:siterubyverarch , :path, 'directory for aux ruby binaries'],
+      [:rbdir           , :path, 'directory for ruby scripts'],
+      [:sodir           , :path, 'directory for ruby extentions'],
+      [:rubypath        , :prog, 'path to set to #! line'],
+      [:rubyprog        , :prog, 'ruby program using for installation'],
+      [:makeprog        , :prog, 'make program to compile ruby extentions'],
+      [:extconfopt      , :name, 'options to pass-thru to extconf.rb'],
+      [:without_ext     , :bool, 'do not compile/install ruby extentions'],
+      [:without_doc     , :bool, 'do not generate html documentation'],
+      [:shebang         , :pick, 'shebang line (#!) editing mode (all,ruby,never)'],
+      [:doctemplate     , :pick, 'document template to use (html|xml)'],
+      [:testrunner      , :pick, 'Runner to use for testing (auto|console|tk|gtk|gtk2)'],
+      [:installdirs     , :pick, 'install location mode (std,site,home :: libruby,site_ruby,$HOME)']
+    ]
+
+    # List of configurable options.
+    OPTIONS = DESCRIPTIONS.collect{ |(k,t,v)| k.to_s }
+
+    # Pathname attribute. Pathnames are automatically expanded
+    # unless they start with '$', a path variable.
+    def self.attr_pathname(name)
+      class_eval %{
+        def #{name}
+          @#{name}.gsub(%r<\\$([^/]+)>){ self[$1] }
+        end
+        def #{name}=(path)
+          raise SetupError, "bad config: #{name.to_s.upcase} requires argument" unless path
+          @#{name} = (path[0,1] == '$' ? path : File.expand_path(path))
+        end
+      }   
+    end
+
+    # List of pathnames. These are not expanded though.
+    def self.attr_pathlist(name)
+      class_eval %{
+        def #{name}
+          @#{name}
+        end
+        def #{name}=(pathlist)
+          case pathlist
+          when Array
+            @#{name} = pathlist
+          else
+            @#{name} = pathlist.to_s.split(/[:;,]/)
+          end
+        end
+      }   
+    end
+
+    # Adds boolean support.
+    def self.attr_accessor(*names)
+      bools, attrs = names.partition{ |name| name.to_s =~ /\?$/ }
+      attr_boolean *bools
+      super *attrs
+    end
+
+    # Boolean attribute. Can be assigned true, false, nil, or
+    # a string matching yes|true|y|t or no|false|n|f.
+    def self.attr_boolean(*names)
+      names.each do |name|
+        name = name.to_s.chomp('?')
+        attr_reader name  # MAYBE: Deprecate
+        code = %{
+          def #{name}?; @#{name}; end
+          def #{name}=(val)
+            case val
+            when true, false, nil
+              @#{name} = val
+            else
+              case val.to_s.downcase
+              when 'y', 'yes', 't', 'true'
+                 @#{name} = true
+              when 'n', 'no', 'f', 'false'
+                 @#{name} = false
+              else
+                raise SetupError, "bad config: use #{name.upcase}=(yes|no) [\#{val}]"
+              end
+            end
+          end
+        }
+        class_eval code
+      end
+    end
+
+    DESCRIPTIONS.each do |k,t,d|
+      case t
+      when :path
+        attr_pathname k
+      when :bool
+        attr_boolean k
+      else
+        attr_accessor k
+      end
+    end
+
+    # # provide verbosity (default is true)
+    # attr_accessor :verbose?
+
+    # # don't actually write files to system
+    # attr_accessor :no_harm?
+
+    # shebang has only three options.
+    def shebang=(val)
+      if %w(all ruby never).include?(val)
+        @shebang = val
+      else
+        raise SetupError, "bad config: use SHEBANG=(all|ruby|never) [#{val}]"
+      end
+    end
+
+    # installdirs has only three options; and it has side-effects.
+    def installdirs=(val)
+      @installdirs = val
+      case val.to_s
+      when 'std'
+        self.rbdir = '$librubyver'
+        self.sodir = '$librubyverarch'
+      when 'site'
+        self.rbdir = '$siterubyver'
+        self.sodir = '$siterubyverarch'
+      when 'home'
+        raise SetupError, 'HOME is not set.' unless ENV['HOME']
+        self.prefix = ENV['HOME']
+        self.rbdir = '$libdir/ruby'
+        self.sodir = '$libdir/ruby'
+      else
+        raise SetupError, "bad config: use INSTALLDIRS=(std|site|home|local) [#{val}]"
+      end
+    end
+
+    # New ConfigTable
+    def initialize(values=nil)
+      initialize_defaults
+      if values
+        values.each{ |k,v| __send__("#{k}=", v) }
+      end
+      yeild(self) if block_given?
+      load_config if File.file?(CONFIGFILE)
+    end
+
+    # Assign CONFIG defaults
+    #
+    # TODO: Does this handle 'nmake' on windows?
+    def initialize_defaults
+      prefix = RBCONFIG['prefix']
+
+      rubypath = File.join(RBCONFIG['bindir'], RBCONFIG['ruby_install_name'] + RBCONFIG['EXEEXT'])
+
+      major = RBCONFIG['MAJOR'].to_i
+      minor = RBCONFIG['MINOR'].to_i
+      teeny = RBCONFIG['TEENY'].to_i
+      version = "#{major}.#{minor}"
+
+      # ruby ver. >= 1.4.4?
+      newpath_p = ((major >= 2) or
+                   ((major == 1) and
+                    ((minor >= 5) or
+                     ((minor == 4) and (teeny >= 4)))))
+
+      if RBCONFIG['rubylibdir']
+        # V > 1.6.3
+        libruby         = "#{prefix}/lib/ruby"
+        librubyver      = RBCONFIG['rubylibdir']
+        librubyverarch  = RBCONFIG['archdir']
+        siteruby        = RBCONFIG['sitedir']
+        siterubyver     = RBCONFIG['sitelibdir']
+        siterubyverarch = RBCONFIG['sitearchdir']
+      elsif newpath_p
+        # 1.4.4 <= V <= 1.6.3
+        libruby         = "#{prefix}/lib/ruby"
+        librubyver      = "#{prefix}/lib/ruby/#{version}"
+        librubyverarch  = "#{prefix}/lib/ruby/#{version}/#{c['arch']}"
+        siteruby        = RBCONFIG['sitedir']
+        siterubyver     = "$siteruby/#{version}"
+        siterubyverarch = "$siterubyver/#{RBCONFIG['arch']}"
+      else
+        # V < 1.4.4
+        libruby         = "#{prefix}/lib/ruby"
+        librubyver      = "#{prefix}/lib/ruby/#{version}"
+        librubyverarch  = "#{prefix}/lib/ruby/#{version}/#{c['arch']}"
+        siteruby        = "#{prefix}/lib/ruby/#{version}/site_ruby"
+        siterubyver     = siteruby
+        siterubyverarch = "$siterubyver/#{RBCONFIG['arch']}"
+      end
+
+      if arg = RBCONFIG['configure_args'].split.detect {|arg| /--with-make-prog=/ =~ arg }
+        makeprog = arg.sub(/'/, '').split(/=/, 2)[1]
+      else
+        makeprog = 'make'
+      end
+
+      parameterize = lambda do |path|
+        val = RBCONFIG[path]
+        val.sub(/\A#{Regexp.quote(prefix)}/, '$prefix')
+      end
+
+      self.prefix          = prefix
+      self.bindir          = parameterize['bindir']
+      self.libdir          = parameterize['libdir']
+      self.datadir         = parameterize['datadir']
+      self.mandir          = parameterize['mandir']
+      self.docdir          = File.dirname(parameterize['docdir'])  # b/c of trailing $(PACKAGE)
+      self.sysconfdir      = parameterize['sysconfdir']
+      self.localstatedir   = parameterize['localstatedir']
+      self.libruby         = libruby
+      self.librubyver      = librubyver
+      self.librubyverarch  = librubyverarch
+      self.siteruby        = siteruby
+      self.siterubyver     = siterubyver
+      self.siterubyverarch = siterubyverarch
+      self.rbdir           = '$siterubyver'
+      self.sodir           = '$siterubyverarch'
+      self.rubypath        = rubypath
+      self.rubyprog        = rubypath
+      self.makeprog        = makeprog
+      self.extconfopt      = ''
+      self.shebang         = 'ruby'
+      self.without_ext     = 'no'
+      self.without_doc     = 'yes'
+      self.doctemplate     = 'html'
+      self.testrunner      = 'auto'
+      self.installdirs     = 'site'
+    end
+
+    # Get configuration from environment.
+    def env_config
+      OPTIONS.each do |name|
+        if value = ENV[name]
+          __send__("#{name}=",value)
+        end
+      end
+    end
+
+    # Load configuration.
+    def load_config
+      #if File.file?(CONFIGFILE)
+        begin
+          File.foreach(CONFIGFILE) do |line|
+            k, v = *line.split(/=/, 2)
+            __send__("#{k}=",v.strip) #self[k] = v.strip
+          end
+        rescue Errno::ENOENT
+          raise SetupError, $!.message + "\n#{File.basename($0)} config first"
+        end
+      #end
+    end
+
+    # Save configuration.
+    def save_config
+      File.open(CONFIGFILE, 'w') do |f|
+        OPTIONS.each do |name|
+          val = self[name]
+          f << "#{name}=#{val}\n"
+        end
+      end
+    end
+
+    def show
+      fmt = "%-20s %s\n"
+      OPTIONS.each do |name|
+        value = self[name]
+        reslv = __send__(name)
+        case reslv
+        when String
+          reslv = "(none)" if reslv.empty?
+        when false, nil
+          reslv = "no"
+        when true
+          reslv = "yes"
+        end
+        printf fmt, name, reslv
+      end
+    end
+
+    #
+
+    def extconfs
+      @extconfs ||= Dir['ext/**/extconf.rb']
+    end
+
+    def extensions
+      @extensions ||= extconfs.collect{ |f| File.dirname(f) }
+    end
+
+    def compiles?
+      !extensions.empty?
+    end
+
+    private
+
+    # Get unresloved attribute.
+    def [](name)
+      instance_variable_get("@#{name}")
+    end
+
+    # Set attribute.
+    def []=(name, value)
+      instance_variable_set("@#{name}", value)
+    end
+
+    # Resolved attribute. (for paths)
+    #def resolve(name)
+    #  self[name].gsub(%r<\\$([^/]+)>){ self[$1] }
+    #end
+
+  end
+
+  # Installer class handles the actual install procedure,
+  # as well as the other tasks, such as testing.
+
+  class Installer
+
+    MANIFEST  = '.installedfiles'
+
+    FILETYPES = %w( bin lib ext data conf man doc )
+
+    TASK_DESCRIPTIONS = [
+      [ 'all',      'do config, setup, then install' ],
+      [ 'config',   'saves your configurations' ],
+      [ 'show',     'shows current configuration' ],
+      [ 'setup',    'compiles ruby extentions and others' ],
+      [ 'doc',      'generate html documentation' ],
+      [ 'index',    'generate index documentation' ],
+      [ 'install',  'installs files' ],
+      [ 'test',     'run all tests in test/' ],
+      [ 'clean',    "does `make clean' for each extention" ],
+      [ 'distclean',"does `make distclean' for each extention" ]
+    ]
+
+    TASKS = %w(all config show setup test install uninstall doc index clean distclean)
+
+    # Configuration
+    attr :config
+
+    attr_writer :no_harm
+    attr_writer :verbose
+    attr_writer :quiet
+
+    attr_accessor :install_prefix
+
+    # New Installer.
+    def initialize #:yield:
+      srcroot = '.'
+      objroot = '.'
+
+      @config = ConfigTable.new
+
+      @srcdir = File.expand_path(srcroot)
+      @objdir = File.expand_path(objroot)
+      @currdir = '.'
+
+      self.quiet   = ENV['quiet'] if ENV['quiet']
+      self.verbose = ENV['verbose'] if ENV['verbose']
+      self.no_harm = ENV['nowrite'] if ENV['nowrite']
+
+      yield(self) if block_given?
+    end
+
+    def inspect
+      "#<#{self.class} #{File.basename(@srcdir)}>"
+    end
+
+    # Are we running an installation?
+    def installation?; @installation; end
+    def installation!; @installation = true; end
+
+    def no_harm?; @no_harm; end
+    def verbose?; @verbose; end
+    def quiet?; @quiet; end
+
+    def verbose_off #:yield:
+      begin
+        save, @verbose = verbose?, false
+        yield
+      ensure
+        @verbose = save
+      end
+    end
+
+    # Rake task handlers
+    def rake_define
+      require 'rake/clean'
+
+      desc 'Config, setup and then install'
+      task :all => [:config, :setup, :install]
+
+      desc 'Saves your configurations'
+      task :config do exec_config end
+
+      desc 'Compiles ruby extentions'
+      task :setup do exec_setup end
+
+      desc 'Runs unit tests'
+      task :test do exec_test end
+
+      desc 'Generate html api docs'
+      task :doc do exec_doc end
+
+      desc 'Generate api index docs'
+      task :index do exec_index end
+
+      desc 'Installs files'
+      task :install do exec_install end
+
+      desc 'Uninstalls files'
+      task :uninstall do exec_uninstall end
+
+      #desc "Does `make clean' for each extention"
+      task :makeclean do exec_clean end
+
+      task :clean => [:makeclean]
+
+      #desc  "Does `make distclean' for each extention"
+      task :distclean do exec_distclean end
+
+      task :clobber => [:distclean]
+
+      desc 'Shows current configuration'
+      task :show do exec_show end
+    end
+
+    # Added these for future use in simplificaiton of design.
+
+    def extensions
+      @extensions ||= Dir['ext/**/extconf.rb']
+    end
+
+    def compiles?
+      !extensions.empty?
+    end
+
+    #
+    def noop(rel); end
+
+    #
+    # Hook Script API bases
+    #
+
+    def srcdir_root
+      @srcdir
+    end
+
+    def objdir_root
+      @objdir
+    end
+
+    def relpath
+      @currdir
+    end
+
+    #
+    # Task all
+    #
+
+    def exec_all
+      exec_config
+      exec_setup
+      exec_test     # TODO: we need to stop here if tests fail (how?)
+      exec_doc      if GENERATE_RDOCS && !config.without_doc?
+      exec_install
+    end
+
+    #
+    # TASK config
+    #
+
+    def exec_config
+      config.env_config
+      config.save_config
+      config.show unless quiet?
+      puts("Configuration saved.") unless quiet?
+      exec_task_traverse 'config'
+    end
+
+    alias config_dir_bin noop
+    alias config_dir_lib noop
+
+    def config_dir_ext(rel)
+      extconf if extdir?(curr_srcdir())
+    end
+
+    alias config_dir_data noop
+    alias config_dir_conf noop
+    alias config_dir_man noop
+    alias config_dir_doc noop
+
+    def extconf
+      ruby "#{curr_srcdir()}/extconf.rb", config.extconfopt
+    end
+
+    #
+    # TASK show
+    #
+
+    def exec_show
+      config.show
+    end
+
+    #
+    # TASK setup
+    #
+    # FIXME: Update shebang at time of install not before.
+    # for now I've commented it out the shebang.
+
+    def exec_setup
+      exec_task_traverse 'setup'
+    end
+
+    def setup_dir_bin(rel)
+      files_of(curr_srcdir()).each do |fname|
+        #update_shebang_line "#{curr_srcdir()}/#{fname}"
+      end
+    end
+
+    alias setup_dir_lib noop
+
+    def setup_dir_ext(rel)
+      make if extdir?(curr_srcdir())
+    end
+
+    alias setup_dir_data noop
+    alias setup_dir_conf noop
+    alias setup_dir_man noop
+    alias setup_dir_doc noop
+
+    def update_shebang_line(path)
+      return if no_harm?
+      return if config.shebang == 'never'
+      old = Shebang.load(path)
+      if old
+        if old.args.size > 1
+          $stderr.puts "warning: #{path}"
+          $stderr.puts "Shebang line has too many args."
+          $stderr.puts "It is not portable and your program may not work."
+        end
+        new = new_shebang(old)
+        return if new.to_s == old.to_s
+      else
+        return unless config.shebang == 'all'
+        new = Shebang.new(config.rubypath)
+      end
+      $stderr.puts "updating shebang: #{File.basename(path)}" if verbose?
+      open_atomic_writer(path) {|output|
+        File.open(path, 'rb') {|f|
+          f.gets if old   # discard
+          output.puts new.to_s
+          output.print f.read
+        }
+      }
+    end
+
+    def new_shebang(old)
+      if /\Aruby/ =~ File.basename(old.cmd)
+        Shebang.new(config.rubypath, old.args)
+      elsif File.basename(old.cmd) == 'env' and old.args.first == 'ruby'
+        Shebang.new(config.rubypath, old.args[1..-1])
+      else
+        return old unless config.shebang == 'all'
+        Shebang.new(config.rubypath)
+      end
+    end
+
+    def open_atomic_writer(path, &block)
+      tmpfile = File.basename(path) + '.tmp'
+      begin
+        File.open(tmpfile, 'wb', &block)
+        File.rename tmpfile, File.basename(path)
+      ensure
+        File.unlink tmpfile if File.exist?(tmpfile)
+      end
+    end
+
+    class Shebang
+      def Shebang.load(path)
+        line = nil
+        File.open(path) {|f|
+          line = f.gets
+        }
+        return nil unless /\A#!/ =~ line
+        parse(line)
+      end
+
+      def Shebang.parse(line)
+        cmd, *args = *line.strip.sub(/\A\#!/, '').split(' ')
+        new(cmd, args)
+      end
+
+      def initialize(cmd, args = [])
+        @cmd = cmd
+        @args = args
+      end
+
+      attr_reader :cmd
+      attr_reader :args
+
+      def to_s
+        "#! #{@cmd}" + (@args.empty? ? '' : " #{@args.join(' ')}")
+      end
+    end
+
+    #
+    # TASK test
+    #
+    # TODO: Add spec support.
+
+    def exec_test
+      $stderr.puts 'Running tests...' if verbose?
+
+      runner = config.testrunner
+
+      case runner
+      when 'auto'
+        unless File.directory?('test')
+          $stderr.puts 'no test in this package' if verbose?
+          return
+        end
+        begin
+          require 'test/unit'
+        rescue LoadError
+          setup_rb_error 'test/unit cannot loaded.  You need Ruby 1.8 or later to invoke this task.'
+        end
+        autorunner = Test::Unit::AutoRunner.new(true)
+        autorunner.to_run << 'test'
+        autorunner.run
+      else # use testrb
+        opt = []
+        opt << " -v" if verbose?
+        opt << " --runner #{runner}"
+        if File.file?('test/suite.rb')
+          notests = false
+          opt << "test/suite.rb"
+        else
+          notests = Dir["test/**/*.rb"].empty?
+          lib = ["lib"] + config.extensions.collect{ |d| File.dirname(d) }
+          opt << "-I" + lib.join(':')
+          opt << Dir["test/**/{test,tc}*.rb"]
+        end
+        opt = opt.flatten.join(' ').strip
+        # run tests
+        if notests
+          $stderr.puts 'no test in this package' if verbose?
+        else
+          cmd = "testrb #{opt}"
+          $stderr.puts cmd if verbose?
+          system cmd  #config.ruby "-S tesrb", opt
+        end
+      end
+    end
+
+    # MAYBE: We could traverse and run each test independently (?)
+    #def test_dir_test
+    #end
+
+    #
+    # TASK doc
+    #
+
+    def exec_doc
+      output    = File.join('doc', 'rdoc')
+      title     = (PACKAGE.capitalize + " API").strip
+      main      = Dir.glob("README{,.txt}", File::FNM_CASEFOLD).first
+      template  = config.doctemplate || 'html'
+
+      opt = []
+      opt << "-U"
+      opt << "-S"
+      opt << "--op=#{output}"
+      opt << "--template=#{template}"
+      opt << "--title=#{title}"
+      opt << "--main=#{main}"     if main
+
+      if File.exist?('.document')
+        files = File.read('.document').split("\n")
+        files.reject!{ |l| l =~ /^\s*[#]/ || l !~ /\S/ }
+        files.collect!{ |f| f.strip }
+        opt << files
+      else
+        opt << main               if main
+        opt << ["lib", "ext"]
+      end
+
+      opt = opt.flatten
+
+      if no_harm?
+        puts "rdoc " + opt.join(' ').strip
+      else
+        #sh "rdoc {opt.join(' ').strip}"
+        require 'rdoc/rdoc'
+        ::RDoc::RDoc.new.document(opt)
+      end
+    end
+
+    #
+    # TASK index
+    #
+    # TODO: Totally deprecate stadard ri support in favor of fastri.
+
+    def exec_index
+      begin
+        require 'fastri/version'
+        fastri = true
+      rescue LoadError
+        fastri = false
+      end
+      if fastri
+        if no_harm?
+          $stderr.puts "fastri-server -b"
+        else
+          system "fastri-server -b"
+        end
+      else
+        case config.installdirs
+        when 'std'
+          output = "--ri-system"
+        when 'site'
+          output = "--ri-site"
+        when 'home'
+          output = "--ri"
+        else
+          abort "bad config: sould not be possible -- installdirs = #{config.installdirs}"
+        end
+
+        if File.exist?('.document')
+          files = File.read('.document').split("\n")
+          files.reject!{ |l| l =~ /^\s*[#]/ || l !~ /\S/ }
+          files.collect!{ |f| f.strip }
+        else
+          files = ["lib", "ext"]
+        end
+
+        opt = []
+        opt << "-U"
+        opt << output
+        opt << files
+        opt = opt.flatten
+
+        if no_harm?
+          puts "rdoc #{opt.join(' ').strip}"
+        else
+          #sh "rdoc #{opt.join(' ').strip}"
+          require 'rdoc/rdoc'
+          ::RDoc::RDoc.new.document(opt)
+        end
+      end
+    end
+
+    #
+    # TASK install
+    #
+
+    def exec_install
+      installation!  # were are installing
+      #rm_f MANIFEST # we'll append rather then delete!
+      exec_task_traverse 'install'
+    end
+
+    def install_dir_bin(rel)
+      install_files targetfiles(), "#{config.bindir}/#{rel}", 0755
+    end
+
+    def install_dir_lib(rel)
+      install_files libfiles(), "#{config.rbdir}/#{rel}", 0644
+    end
+
+    def install_dir_ext(rel)
+      return unless extdir?(curr_srcdir())
+      install_files rubyextentions('.'),
+                    "#{config.sodir}/#{File.dirname(rel)}", 0555
+    end
+
+    def install_dir_data(rel)
+      install_files targetfiles(), "#{config.datadir}/#{rel}", 0644
+    end
+
+    def install_dir_conf(rel)
+      # FIXME: should not remove current config files
+      # (rename previous file to .old/.org)
+      install_files targetfiles(), "#{config.sysconfdir}/#{rel}", 0644
+    end
+
+    def install_dir_man(rel)
+      install_files targetfiles(), "#{config.mandir}/#{rel}", 0644
+    end
+
+    # doc installs to directory named: "ruby-#{package}"
+    def install_dir_doc(rel)
+      return if config.without_doc?
+      dir = "#{config.docdir}/ruby-#{PACKAGE}/#{rel}" # "#{config.docdir}/#{rel}"
+      install_files targetfiles(), dir, 0644
+    end
+
+    def install_files(list, dest, mode)
+      mkdir_p dest, install_prefix
+      list.each do |fname|
+        install fname, dest, mode, install_prefix
+      end
+    end
+
+    def libfiles
+      glob_reject(%w(*.y *.output), targetfiles())
+    end
+
+    def rubyextentions(dir)
+      ents = glob_select("*.#{dllext}", targetfiles())
+      if ents.empty?
+        setup_rb_error "no ruby extention exists: 'ruby #{$0} setup' first"
+      end
+      ents
+    end
+
+    def dllext
+      RBCONFIG['DLEXT']
+    end
+
+    def targetfiles
+      mapdir(existfiles() - hookfiles())
+    end
+
+    def mapdir(ents)
+      ents.map {|ent|
+        if File.exist?(ent)
+        then ent                         # objdir
+        else "#{curr_srcdir()}/#{ent}"   # srcdir
+        end
+      }
+    end
+
+    # picked up many entries from cvs-1.11.1/src/ignore.c
+    JUNK_FILES = %w( 
+      core RCSLOG tags TAGS .make.state
+      .nse_depinfo #* .#* cvslog.* ,* .del-* *.olb
+      *~ *.old *.bak *.BAK *.orig *.rej _$* *$
+
+      *.org *.in .*
+    )
+
+    def existfiles
+      glob_reject(JUNK_FILES, (files_of(curr_srcdir()) | files_of('.')))
+    end
+
+    def hookfiles
+      %w( pre-%s post-%s pre-%s.rb post-%s.rb ).map {|fmt|
+        %w( config setup install clean ).map {|t| sprintf(fmt, t) }
+      }.flatten
+    end
+
+    def glob_select(pat, ents)
+      re = globs2re([pat])
+      ents.select {|ent| re =~ ent }
+    end
+
+    def glob_reject(pats, ents)
+      re = globs2re(pats)
+      ents.reject {|ent| re =~ ent }
+    end
+
+    GLOB2REGEX = {
+      '.' => '\.',
+      '$' => '\$',
+      '#' => '\#',
+      '*' => '.*'
+    }
+
+    def globs2re(pats)
+      /\A(?:#{
+        pats.map {|pat| pat.gsub(/[\.\$\#\*]/) {|ch| GLOB2REGEX[ch] } }.join('|')
+      })\z/
+    end
+
+    #
+    # TASK uninstall
+    #
+
+    def exec_uninstall
+      paths = File.read(MANIFEST).split("\n")
+      dirs, files = paths.partition{ |f| File.dir?(f) }
+
+      files.each do |file|
+        next if /^\#/ =~ file  # skip comments
+        rm_f(file) if File.exist?(file)
+      end
+
+      dirs.each do |dir|
+        # okay this is over kill, but playing it safe...
+        empty = Dir[File.join(dir,'*')].empty?
+        begin
+          if no_harm?
+            $stderr.puts "rmdir #{dir}"
+          else
+            rmdir(dir) if empty
+          end
+        rescue Errno::ENOTEMPTY
+          $stderr.puts "may not be empty -- #{dir}" if verbose?
+        end
+      end
+
+      rm_f(MANIFEST)
+    end
+
+    #
+    # TASK clean
+    #
+
+    def exec_clean
+      exec_task_traverse 'clean'
+      rm_f ConfigTable::CONFIGFILE
+      #rm_f MANIFEST  # only on clobber!
+    end
+
+    alias clean_dir_bin noop
+    alias clean_dir_lib noop
+    alias clean_dir_data noop
+    alias clean_dir_conf noop
+    alias clean_dir_man noop
+    alias clean_dir_doc noop
+
+    def clean_dir_ext(rel)
+      return unless extdir?(curr_srcdir())
+      make 'clean' if File.file?('Makefile')
+    end
+
+    #
+    # TASK distclean
+    #
+
+    def exec_distclean
+      exec_task_traverse 'distclean'
+      rm_f ConfigTable::CONFIGFILE
+      rm_f MANIFEST
+    end
+
+    alias distclean_dir_bin noop
+    alias distclean_dir_lib noop
+
+    def distclean_dir_ext(rel)
+      return unless extdir?(curr_srcdir())
+      make 'distclean' if File.file?('Makefile')
+    end
+
+    alias distclean_dir_data noop
+    alias distclean_dir_conf noop
+    alias distclean_dir_man noop
+
+    def distclean_dir_doc(rel)
+      if GENERATE_RDOCS
+        rm_rf('rdoc') if File.directory?('rdoc')
+      end
+    end
+
+    #
+    # Traversing
+    #
+
+    def exec_task_traverse(task)
+      run_hook "pre-#{task}"
+      FILETYPES.each do |type|
+        if type == 'ext' and config.without_ext == 'yes'
+          $stderr.puts 'skipping ext/* by user option' if verbose?
+          next
+        end
+        traverse task, type, "#{task}_dir_#{type}"
+      end
+      run_hook "post-#{task}"
+    end
+
+    def traverse(task, rel, mid)
+      dive_into(rel) {
+        run_hook "pre-#{task}"
+        __send__ mid, rel.sub(%r[\A.*?(?:/|\z)], '')
+        directories_of(curr_srcdir()).each do |d|
+          traverse task, "#{rel}/#{d}", mid
+        end
+        run_hook "post-#{task}"
+      }
+    end
+
+    def dive_into(rel)
+      return unless File.dir?("#{@srcdir}/#{rel}")
+
+      dir = File.basename(rel)
+      Dir.mkdir dir unless File.dir?(dir)
+      prevdir = Dir.pwd
+      Dir.chdir dir
+      $stderr.puts '---> ' + rel if verbose?
+      @currdir = rel
+      yield
+      Dir.chdir prevdir
+      $stderr.puts '<--- ' + rel if verbose?
+      @currdir = File.dirname(rel)
+    end
+
+    def run_hook(id)
+      path = [ "#{curr_srcdir()}/#{id}",
+               "#{curr_srcdir()}/#{id}.rb" ].detect {|cand| File.file?(cand) }
+      return unless path
+      begin
+        instance_eval File.read(path), path, 1
+      rescue
+        raise if $DEBUG
+        setup_rb_error "hook #{path} failed:\n" + $!.message
+      end
+    end
+
+    # File Operations
+    #
+    # This module requires: #verbose?, #no_harm?
+
+    def binread(fname)
+      File.open(fname, 'rb'){ |f|
+        return f.read
+      }
+    end
+
+    def mkdir_p(dirname, prefix = nil)
+      dirname = prefix + File.expand_path(dirname) if prefix
+      $stderr.puts "mkdir -p #{dirname}" if verbose?
+      return if no_harm?
+
+      # Does not check '/', it's too abnormal.
+      dirs = File.expand_path(dirname).split(%r<(?=/)>)
+      if /\A[a-z]:\z/i =~ dirs[0]
+        disk = dirs.shift
+        dirs[0] = disk + dirs[0]
+      end
+      dirs.each_index do |idx|
+        path = dirs[0..idx].join('')
+        Dir.mkdir path unless File.dir?(path)
+        record_installation(path)  # also record directories made
+      end
+    end
+
+    def rm_f(path)
+      $stderr.puts "rm -f #{path}" if verbose?
+      return if no_harm?
+      force_remove_file path
+    end
+
+    def rm_rf(path)
+      $stderr.puts "rm -rf #{path}" if verbose?
+      return if no_harm?
+      remove_tree path
+    end
+
+    def rmdir(path)
+      $stderr.puts "rmdir #{path}" if verbose?
+      return if no_harm?
+      Dir.rmdir path
+    end
+
+    def remove_tree(path)
+      if File.symlink?(path)
+        remove_file path
+      elsif File.dir?(path)
+        remove_tree0 path
+      else
+        force_remove_file path
+      end
+    end
+
+    def remove_tree0(path)
+      Dir.foreach(path) do |ent|
+        next if ent == '.'
+        next if ent == '..'
+        entpath = "#{path}/#{ent}"
+        if File.symlink?(entpath)
+          remove_file entpath
+        elsif File.dir?(entpath)
+          remove_tree0 entpath
+        else
+          force_remove_file entpath
+        end
+      end
+      begin
+        Dir.rmdir path
+      rescue Errno::ENOTEMPTY
+        # directory may not be empty
+      end
+    end
+
+    def move_file(src, dest)
+      force_remove_file dest
+      begin
+        File.rename src, dest
+      rescue
+        File.open(dest, 'wb') {|f|
+          f.write binread(src)
+        }
+        File.chmod File.stat(src).mode, dest
+        File.unlink src
+      end
+    end
+
+    def force_remove_file(path)
+      begin
+        remove_file path
+      rescue
+      end
+    end
+
+    def remove_file(path)
+      File.chmod 0777, path
+      File.unlink path
+    end
+
+    def install(from, dest, mode, prefix = nil)
+      $stderr.puts "install #{from} #{dest}" if verbose?
+      return if no_harm?
+
+      realdest = prefix ? prefix + File.expand_path(dest) : dest
+      realdest = File.join(realdest, File.basename(from)) if File.dir?(realdest)
+      str = binread(from)
+      if diff?(str, realdest)
+        verbose_off {
+          rm_f realdest if File.exist?(realdest)
+        }
+        File.open(realdest, 'wb') {|f|
+          f.write str
+        }
+        File.chmod mode, realdest
+
+        if prefix
+          path = realdest.sub(prefix, '')
+        else
+          path = realdest
+        end
+
+        record_installation(path)
+      end
+    end
+
+    def record_installation(path)
+      File.open("#{objdir_root()}/#{MANIFEST}", 'a') do |f|
+        f.puts(path)
+      end
+    end
+
+    def diff?(new_content, path)
+      return true unless File.exist?(path)
+      new_content != binread(path)
+    end
+
+    def command(*args)
+      $stderr.puts args.join(' ') if verbose?
+      system(*args) or raise RuntimeError,
+          "system(#{args.map{|a| a.inspect }.join(' ')}) failed"
+    end
+
+    def ruby(*args)
+      command config.rubyprog, *args
+    end
+
+    def make(task = nil)
+      command(*[config.makeprog, task].compact)
+    end
+
+    def extdir?(dir)
+      File.exist?("#{dir}/MANIFEST") or File.exist?("#{dir}/extconf.rb")
+    end
+
+    def files_of(dir)
+      Dir.open(dir) {|d|
+        return d.select {|ent| File.file?("#{dir}/#{ent}") }
+      }
+    end
+
+    DIR_REJECT = %w( . .. CVS SCCS RCS CVS.adm .svn )
+
+    def directories_of(dir)
+      Dir.open(dir) {|d|
+        return d.select {|ent| File.dir?("#{dir}/#{ent}") } - DIR_REJECT
+      }
+    end
+
+    #
+    # Hook Script API
+    #
+    # These require: #srcdir_root, #objdir_root, #relpath
+    #
+
+    #
+    def get_config(key)
+      config.__send__(key)
+    end
+
+    # obsolete: use metaconfig to change configuration
+    # TODO: what to do with?
+    def set_config(key, val)
+      config[key] = val
+    end
+
+    #
+    # srcdir/objdir (works only in the package directory)
+    #
+
+    def curr_srcdir
+      "#{srcdir_root()}/#{relpath()}"
+    end
+
+    def curr_objdir
+      "#{objdir_root()}/#{relpath()}"
+    end
+
+    def srcfile(path)
+      "#{curr_srcdir()}/#{path}"
+    end
+
+    def srcexist?(path)
+      File.exist?(srcfile(path))
+    end
+
+    def srcdirectory?(path)
+      File.dir?(srcfile(path))
+    end
+
+    def srcfile?(path)
+      File.file?(srcfile(path))
+    end
+
+    def srcentries(path = '.')
+      Dir.open("#{curr_srcdir()}/#{path}") {|d|
+        return d.to_a - %w(. ..)
+      }
+    end
+
+    def srcfiles(path = '.')
+      srcentries(path).select {|fname|
+        File.file?(File.join(curr_srcdir(), path, fname))
+      }
+    end
+
+    def srcdirectories(path = '.')
+      srcentries(path).select {|fname|
+        File.dir?(File.join(curr_srcdir(), path, fname))
+      }
+    end
+
+  end
+
+  # CLI runner.
+  def self.run_cli
+    installer = Setup::Installer.new
+
+    task = ARGV.find{ |a| a !~ /^[-]/ }
+    task = 'all' unless task
+
+    unless Setup::Installer::TASKS.include?(task)
+      $stderr.puts "Not a valid task -- #{task}"
+      exit 1
+    end
+
+    opts = OptionParser.new
+
+    opts.banner = "Usage: #{File.basename($0)} [task] [options]"
+
+    if task == 'config' or task == 'all'
+      opts.separator ""
+      opts.separator "Config options:"   
+      Setup::ConfigTable::DESCRIPTIONS.each do |name, type, desc|
+        opts.on("--#{name} #{type.to_s.upcase}", desc) do |val|
+          ENV[name.to_s] = val.to_s
+        end
+      end
+    end
+
+    if task == 'install'
+      opts.separator ""
+      opts.separator "Install options:"
+
+      opts.on("--prefix PATH", "Installation prefix") do |val|
+        installer.install_prefix = val
+      end
+    end
+
+    if task == 'test'
+      opts.separator ""
+      opts.separator "Install options:"
+
+      opts.on("--runner TYPE", "Test runner (auto|console|gtk|gtk2|tk)") do |val|
+        installer.config.testrunner = val
+      end
+    end
+
+    # common options
+    opts.separator ""
+    opts.separator "General options:"
+
+    opts.on("-q", "--quiet", "Silence output") do |val|
+      installer.quiet = val
+    end
+
+    opts.on("--verbose", "Provide verbose output") do |val|
+      installer.verbose = val
+    end
+
+    opts.on("-n", "--no-write", "Do not write to disk") do |val|
+      installer.no_harm = !val
+    end
+
+    opts.on("--dryrun", "Same as --no-write") do |val|
+      installer.no_harm = val
+    end
+
+    # common options
+    opts.separator ""
+    opts.separator "Inform options:"
+
+    # Tail options (eg. commands in option form)
+    opts.on_tail("-h", "--help", "display this help information") do
+      puts Setup.help
+      exit
+    end
+
+    opts.on_tail("--version", "Show version") do
+      puts File.basename($0) + ' v' + Setup::Version.join('.')
+      exit
+    end
+
+    opts.on_tail("--copyright", "Show copyright") do
+      puts Setup::Copyright
+      exit
+    end
+
+    begin
+      opts.parse!(ARGV)
+    rescue OptionParser::InvalidOption
+      $stderr.puts $!.to_s.capitalize
+      exit 1
+    end
+
+    begin
+      installer.__send__("exec_#{task}")
+    rescue SetupError
+      raise if $DEBUG
+      $stderr.puts $!.message
+      $stderr.puts "Try 'ruby #{$0} --help' for detailed usage."
+      exit 1
+    end
+  end
+
+  # Generate help text.
+  def self.help
+    fmt = " " * 10 + "%-10s       %s"
+    commands = Installer::TASK_DESCRIPTIONS.collect do |k,d|
+      (fmt % ["#{k}", d])
+    end.join("\n").strip
+
+    fmt = " " * 13 + "%-20s       %s"
+    configs = ConfigTable::DESCRIPTIONS.collect do |k,t,d|
+      (fmt % ["--#{k}", d])
+    end.join("\n").strip
+
+    text = <<-END
+      USAGE: #{File.basename($0)} [command] [options]
+
+      Commands:
+          #{commands}
+
+      Options for CONFIG:
+             #{configs}
+
+      Options for INSTALL:
+             --prefix                   Set the install prefix
+
+      Options in common:
+          -q --quiet                    Silence output
+             --verbose                  Provide verbose output
+          -n --no-write                 Do not write to disk
+
+    END
+
+    text.gsub(/^ \ \ \ \ \ /, '')
+  end
+
+  #
+  def self.run_rake
+    installer = Setup::Installer.new
+    installer.rake_define
+  end
+
+end
+
+#
+# Ruby Extensions
+#
+
+unless File.respond_to?(:read)   # Ruby 1.6 and less
+  def File.read(fname)
+    open(fname) {|f|
+      return f.read
+    }
+  end
+end
+
+unless Errno.const_defined?(:ENOTEMPTY)   # Windows?
+  module Errno
+    class ENOTEMPTY
+      # We do not raise this exception, implementation is not needed.
+    end
+  end
+end
+
+# for corrupted Windows' stat(2)
+def File.dir?(path)
+  File.directory?((path[-1,1] == '/') ? path : path + '/')
+end
+
+#
+# Runners
+#
+
+if $0 == __FILE__
+
+  Setup.run_cli
+
+elsif defined?(Rake)
+
+  Setup.run_rake
+
+end
+