titech-pubnet-auth 0.1.0

data/Gemfile

@@ -0,0 +1,3 @@
+source 'https://rubygems.org'
+
+gemspec

data/README.md

@@ -0,0 +1,54 @@
+## これはなに？
+
+東工大の titech-pubnet の認証を自動で行なうための gem です。
+
+Mac OS X Mountain Lion, Ruby1.9.3 で動作確認済みです。たぶん Ruby1.9 じゃないと動きません。
+
+titech-pubnet の認証の仕様に依存しているため、仕様が変われば動かなくなるかもしれません。その時は update するかもしれません。主に以下のようなものの内容に依存していると思います。
+
+- 認証ページのドメイン
+- 認証ページのフォーム
+- 認証ページのloginscript.js
+- titech-pubnet の HTTPプロキシ（config/proxy.ymlで再設定可）
+
+## 使い方
+
+参考：Ruby1.9 のインストール（Mac OS Xの場合）。
+
+	$ sudo port install ruby19 # MacPortsを使うなら
+	$ brew install ruby # Homebrewを使うなら
+
+gem のインストール
+
+	gem install titech-pubnet-auth
+
+最初に、ユーザー名、パスワードを設定
+
+	$ titech-pubnet-auth -c
+
+起動
+
+	$ titech-pubnet-auth
+
+
+デーモンとして起動
+
+	$ titech-pubnet-auth -d
+	$ titech-pubnet-auth-daemon # これでもOK
+
+その他、オプションは`$ titech-pubnet-auth -h`で。
+
+### ログイン時に起動する方法（Mac OS X の場合）
+
+色々あるけど以下が簡単。
+
+1. 「システム環境設定」→「ユーザとグループ」→「ログイン項目」に起動スクリプト`titech-pubnet-auth-daemon`を追加。
+2. （デフォルトだとプロセス終了時にターミナル.appが閉じない。これが煩わしい場合は、）ターミナルを起動して、「環境設定」→「設定タブ」→「シェル」で、「シェルの終了時」の動作を「ウィンドウを閉じる」にする。
+
+## TODO
+
+- 接続確認のサンプルサイト増やす
+- パスワードを暗号化して保管
+  - 正しいやり方調べる
+- Logger
+- テスト

data/Rakefile

@@ -0,0 +1,11 @@
+# -*- coding: utf-8 -*-
+require 'rdoc/task'
+require "bundler/gem_tasks"
+
+BASE_DIR = File.dirname(__FILE__)
+
+require 'yard'
+require 'yard/rake/yardoc_task'
+YARD::Rake::YardocTask.new do |t|
+  t.files   = ['README.md','lib/**/*.rb']
+end

data/bin/titech-pubnet-auth

@@ -0,0 +1,71 @@
+#!/usr/bin/env ruby
+# -*- coding: utf-8 -*-
+require 'pry'
+
+$:.unshift File.expand_path('../lib', File.dirname(__FILE__))
+require 'titech_pubnet_auth'
+require 'optparse'
+
+opt = OptionParser.new
+
+interval = 3
+opt.on('-i','--interval=SECONDS','Specify the polling interval.[3]'){|v|
+  interval = v.to_i
+}
+
+daemon = false
+opt.on('-d','--daemon','Execute as a daemon.'){
+  daemon = true
+}
+
+single = false
+opt.on('-s','--single','No loop. Use as single command.'){
+  single = true
+}
+
+configure = !File::exists?(File.expand_path('../config/private.yml', File.dirname(__FILE__)))
+opt.on('-c','--config','Set your username and password.'){
+  configure = true
+}
+
+opt.parse!(ARGV)
+
+if configure
+  puts 'Please type your username:'
+  username = gets.strip
+  system "stty -echo"
+  puts 'Please type your password (typing will be hidden):'
+  password = gets.strip
+  conf = {'private' =>
+    {
+      'username' => username,
+      'password' => password
+    }
+  }
+  f = File::open(File.expand_path('../config/private.yml', File.dirname(__FILE__)),'w'){|f|
+    f << conf.to_yaml
+  }
+  puts 'configured!'
+  exit!
+end
+
+if daemon
+  $stdout = File::open(File.expand_path('~/.titech_pubnet_auth.log'),'w')
+  Process.daemon
+end
+
+pubnet_auth = TitechPubnetAuth.new
+loop do
+  begin
+    mputs 'network_available?', pubnet_auth.network_available?
+    mputs 'is_connected?', pubnet_auth.is_connected? if pubnet_auth.network_available?
+    mputs 'auth', pubnet_auth.auth if pubnet_auth.network_available? and not pubnet_auth.is_connected?
+    print "\n"
+    sleep interval
+  rescue => e
+    p e
+  ensure
+    $stdout.flush
+  end
+  break if single
+end

data/bin/titech-pubnet-auth-daemon

@@ -0,0 +1,5 @@
+#!/usr/bin/env ruby
+# -*- coding: utf-8 -*-
+
+file = File.expand_path('titech-pubnet-auth', File.dirname(__FILE__))
+`#{file} -d 2>&1`

data/config/private.yml

@@ -0,0 +1,4 @@
+---
+private:
+  username: USERNAME
+  password: PASSWORD

data/config/proxy.yml

@@ -0,0 +1,3 @@
+http_proxy:
+  ip: '131.112.125.238'
+  port: 3128

data/lib/titech_pubnet_auth/extension.rb

@@ -0,0 +1,13 @@
+# -*- coding: utf-8 -*-
+
+require 'colorize'
+
+module Kernel
+  #
+  # バッチ処理の経過報告用メソッド。ファイル名と時刻を付けて出力してくれる。
+  #
+  def mputs(tag,msg)
+    s = Time.now.strftime("%Y-%m-%d %H:%M:%S").green + "\t" + caller.first[/([^:]*):/,1].split('/').last.blue + "\t" + tag + "：" + msg.to_s
+    puts(s)
+  end
+end

data/lib/titech_pubnet_auth.rb

@@ -0,0 +1,60 @@
+# -*- coding: utf-8 -*-
+
+require 'mechanize'
+require 'uri'
+require 'yaml'
+
+$:.unshift File.dirname(__FILE__)
+require 'titech_pubnet_auth/extension'
+
+
+class TitechPubnetAuth
+  BASE_DIR = File.expand_path('..',File.dirname(__FILE__))
+
+  SAMPLE_URI = URI.parse('http://github.com')
+
+  def initialize
+    @agent, @agent_with_proxy = Mechanize.new, Mechanize.new
+    [@agent,@agent_with_proxy].each{|agent|
+      agent.follow_meta_refresh = true
+      agent.open_timeout = 3
+    }
+    proxy = YAML.load(File::open(File::expand_path('config/proxy.yml',BASE_DIR),'r'))['http_proxy']
+    @agent_with_proxy.set_proxy(proxy['ip'], proxy['port'])
+    
+    @private = YAML.load(File::open(File::expand_path('config/private.yml',BASE_DIR),'r'))['private']
+  end
+
+  def auth
+    return false if not network_available?
+    return true if is_connected?
+
+    auth_page = @agent.get(SAMPLE_URI)
+    return false if auth_page.uri.hostname != 'wlanauth.noc.titech.ac.jp'
+
+    form = auth_page.form
+    form.buttonClicked = 4
+    form.redirect_url = SAMPLE_URI
+    form.username = @private['username']
+    form.password = @private['password']
+    form.submit
+
+    return is_connected?
+  end
+
+
+  def is_connected?
+    return @agent_with_proxy.get(SAMPLE_URI).uri.hostname == SAMPLE_URI.hostname
+  rescue
+    # retry without the proxy
+    return @agent.get(SAMPLE_URI) == SAMPLE_URI.hostname
+  end
+
+  def network_available?
+    @agent.get('http://portal.titech.ac.jp')
+    return true
+  rescue => e
+    return false
+  end
+
+end

data/titech_pubnet_auth.gemspec

@@ -0,0 +1,23 @@
+# -*- encoding: utf-8 -*-
+
+require 'rake'
+
+Gem::Specification.new do |gem|
+  gem.authors       = ["Sohei Takeno"]
+  gem.email         = ["takeno.sh@gmail.com"]
+  gem.description   = 'This gem provides automatic authentication for titech-pubnet.'
+  gem.summary       = 'This gem provides automatic authentication for titech-pubnet.'
+  gem.homepage      = 'http://for-titech.herokuapp.com'
+  
+  gem.files = FileList['lib/**/*', 'bin/*', 'config/*', 'Rakefile', 'Gemfile', 'README.md', 'titech_pubnet_auth.gemspec'].to_a
+  
+  gem.executables   = gem.files.grep(%r{^bin/}).map{ |f| File.basename(f) }
+  gem.name          = "titech-pubnet-auth"
+  gem.require_paths = ["lib"]
+  gem.version       = "0.1.0"
+
+  gem.add_dependency 'yaml'
+  gem.add_dependency 'colorize'
+  gem.add_dependency 'mechanize', '~> 3.2'
+  
+end

metadata

@@ -0,0 +1,106 @@
+--- !ruby/object:Gem::Specification
+name: titech-pubnet-auth
+version: !ruby/object:Gem::Version
+  version: 0.1.0
+  prerelease: 
+platform: ruby
+authors:
+- Sohei Takeno
+autorequire: 
+bindir: bin
+cert_chain: []
+date: 2012-11-12 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: yaml
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: colorize
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: mechanize
+  requirement: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: '3.2'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: '3.2'
+description: This gem provides automatic authentication for titech-pubnet.
+email:
+- takeno.sh@gmail.com
+executables:
+- titech-pubnet-auth
+- titech-pubnet-auth-daemon
+extensions: []
+extra_rdoc_files: []
+files:
+- lib/titech_pubnet_auth/extension.rb
+- lib/titech_pubnet_auth.rb
+- bin/titech-pubnet-auth
+- bin/titech-pubnet-auth-daemon
+- config/private.yml
+- config/proxy.yml
+- Rakefile
+- Gemfile
+- README.md
+- titech_pubnet_auth.gemspec
+homepage: http://for-titech.herokuapp.com
+licenses: []
+post_install_message: 
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubyforge_project: 
+rubygems_version: 1.8.24
+signing_key: 
+specification_version: 3
+summary: This gem provides automatic authentication for titech-pubnet.
+test_files: []
+has_rdoc: