tinkerforge 2.1.20 → 2.1.21

data/lib/tinkerforge/bricklet_air_quality.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #
@@ -166,8 +166,8 @@ module Tinkerforge
       send_request FUNCTION_GET_ALL_VALUES, [], '', 17, 'l C l l l'
     end
 
-    # Sets a temperature offset in 1/100°C. A offset of 10 will decrease the measured
-    # temperature by 0.1°C.
+    # Sets a temperature offset with resolution 1/100°C. A offset of 10 will decrease
+    # the measured temperature by 0.1°C.
     # 
     # If you install this Bricklet into an enclosure and you want to measure the ambient
     # temperature, you may have to decrease the measured temperature by some value to

data/lib/tinkerforge/bricklet_ambient_light.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_ambient_light_v2.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_ambient_light_v3.rb

@@ -0,0 +1,314 @@
+# -*- ruby encoding: utf-8 -*-
+#############################################################
+# This file was automatically generated on 2019-01-29.      #
+#                                                           #
+# Ruby Bindings Version 2.1.21                              #
+#                                                           #
+# If you have a bugfix for this file and want to commit it, #
+# please fix the bug in the generator. You can find a link  #
+# to the generators git repository on tinkerforge.com       #
+#############################################################
+
+module Tinkerforge
+  # 
+  class BrickletAmbientLightV3 < Device
+    DEVICE_IDENTIFIER = 2131 # :nodoc:
+    DEVICE_DISPLAY_NAME = 'Ambient Light Bricklet 3.0' # :nodoc:
+
+    # This callback is triggered periodically according to the configuration set by
+    # BrickletAmbientLightV3#set_illuminance_callback_configuration.
+    # 
+    # The parameter is the same as BrickletAmbientLightV3#get_illuminance.
+    CALLBACK_ILLUMINANCE = 4
+
+    FUNCTION_GET_ILLUMINANCE = 1 # :nodoc:
+    FUNCTION_SET_ILLUMINANCE_CALLBACK_CONFIGURATION = 2 # :nodoc:
+    FUNCTION_GET_ILLUMINANCE_CALLBACK_CONFIGURATION = 3 # :nodoc:
+    FUNCTION_SET_CONFIGURATION = 5 # :nodoc:
+    FUNCTION_GET_CONFIGURATION = 6 # :nodoc:
+    FUNCTION_GET_SPITFP_ERROR_COUNT = 234 # :nodoc:
+    FUNCTION_SET_BOOTLOADER_MODE = 235 # :nodoc:
+    FUNCTION_GET_BOOTLOADER_MODE = 236 # :nodoc:
+    FUNCTION_SET_WRITE_FIRMWARE_POINTER = 237 # :nodoc:
+    FUNCTION_WRITE_FIRMWARE = 238 # :nodoc:
+    FUNCTION_SET_STATUS_LED_CONFIG = 239 # :nodoc:
+    FUNCTION_GET_STATUS_LED_CONFIG = 240 # :nodoc:
+    FUNCTION_GET_CHIP_TEMPERATURE = 242 # :nodoc:
+    FUNCTION_RESET = 243 # :nodoc:
+    FUNCTION_WRITE_UID = 248 # :nodoc:
+    FUNCTION_READ_UID = 249 # :nodoc:
+    FUNCTION_GET_IDENTITY = 255 # :nodoc:
+
+    THRESHOLD_OPTION_OFF = 'x' # :nodoc:
+    THRESHOLD_OPTION_OUTSIDE = 'o' # :nodoc:
+    THRESHOLD_OPTION_INSIDE = 'i' # :nodoc:
+    THRESHOLD_OPTION_SMALLER = '<' # :nodoc:
+    THRESHOLD_OPTION_GREATER = '>' # :nodoc:
+    ILLUMINANCE_RANGE_UNLIMITED = 6 # :nodoc:
+    ILLUMINANCE_RANGE_64000LUX = 0 # :nodoc:
+    ILLUMINANCE_RANGE_32000LUX = 1 # :nodoc:
+    ILLUMINANCE_RANGE_16000LUX = 2 # :nodoc:
+    ILLUMINANCE_RANGE_8000LUX = 3 # :nodoc:
+    ILLUMINANCE_RANGE_1300LUX = 4 # :nodoc:
+    ILLUMINANCE_RANGE_600LUX = 5 # :nodoc:
+    INTEGRATION_TIME_50MS = 0 # :nodoc:
+    INTEGRATION_TIME_100MS = 1 # :nodoc:
+    INTEGRATION_TIME_150MS = 2 # :nodoc:
+    INTEGRATION_TIME_200MS = 3 # :nodoc:
+    INTEGRATION_TIME_250MS = 4 # :nodoc:
+    INTEGRATION_TIME_300MS = 5 # :nodoc:
+    INTEGRATION_TIME_350MS = 6 # :nodoc:
+    INTEGRATION_TIME_400MS = 7 # :nodoc:
+    BOOTLOADER_MODE_BOOTLOADER = 0 # :nodoc:
+    BOOTLOADER_MODE_FIRMWARE = 1 # :nodoc:
+    BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT = 2 # :nodoc:
+    BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT = 3 # :nodoc:
+    BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT = 4 # :nodoc:
+    BOOTLOADER_STATUS_OK = 0 # :nodoc:
+    BOOTLOADER_STATUS_INVALID_MODE = 1 # :nodoc:
+    BOOTLOADER_STATUS_NO_CHANGE = 2 # :nodoc:
+    BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT = 3 # :nodoc:
+    BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT = 4 # :nodoc:
+    BOOTLOADER_STATUS_CRC_MISMATCH = 5 # :nodoc:
+    STATUS_LED_CONFIG_OFF = 0 # :nodoc:
+    STATUS_LED_CONFIG_ON = 1 # :nodoc:
+    STATUS_LED_CONFIG_SHOW_HEARTBEAT = 2 # :nodoc:
+    STATUS_LED_CONFIG_SHOW_STATUS = 3 # :nodoc:
+
+    # Creates an object with the unique device ID <tt>uid</tt> and adds it to
+    # the IP Connection <tt>ipcon</tt>.
+    def initialize(uid, ipcon)
+      super uid, ipcon
+
+      @api_version = [2, 0, 0]
+
+      @response_expected[FUNCTION_GET_ILLUMINANCE] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_SET_ILLUMINANCE_CALLBACK_CONFIGURATION] = RESPONSE_EXPECTED_TRUE
+      @response_expected[FUNCTION_GET_ILLUMINANCE_CALLBACK_CONFIGURATION] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_SET_CONFIGURATION] = RESPONSE_EXPECTED_FALSE
+      @response_expected[FUNCTION_GET_CONFIGURATION] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_GET_SPITFP_ERROR_COUNT] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_SET_BOOTLOADER_MODE] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_GET_BOOTLOADER_MODE] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_SET_WRITE_FIRMWARE_POINTER] = RESPONSE_EXPECTED_FALSE
+      @response_expected[FUNCTION_WRITE_FIRMWARE] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_SET_STATUS_LED_CONFIG] = RESPONSE_EXPECTED_FALSE
+      @response_expected[FUNCTION_GET_STATUS_LED_CONFIG] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_GET_CHIP_TEMPERATURE] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_RESET] = RESPONSE_EXPECTED_FALSE
+      @response_expected[FUNCTION_WRITE_UID] = RESPONSE_EXPECTED_FALSE
+      @response_expected[FUNCTION_READ_UID] = RESPONSE_EXPECTED_ALWAYS_TRUE
+      @response_expected[FUNCTION_GET_IDENTITY] = RESPONSE_EXPECTED_ALWAYS_TRUE
+
+      @callback_formats[CALLBACK_ILLUMINANCE] = 'L'
+
+    end
+
+    # Returns the illuminance of the ambient light sensor. The measurement range goes
+    # up to about 100000lux, but above 64000lux the precision starts to drop.
+    # The illuminance is given in lux/100, i.e. a value of 450000 means that an
+    # illuminance of 4500lux is measured.
+    # 
+    # An illuminance of 0lux indicates that the sensor is saturated and the
+    # configuration should be modified, see BrickletAmbientLightV3#set_configuration.
+    # 
+    # 
+    # If you want to get the value periodically, it is recommended to use the
+    # CALLBACK_ILLUMINANCE callback. You can set the callback configuration
+    # with BrickletAmbientLightV3#set_illuminance_callback_configuration.
+    def get_illuminance
+      send_request FUNCTION_GET_ILLUMINANCE, [], '', 4, 'L'
+    end
+
+    # The period in ms is the period with which the CALLBACK_ILLUMINANCE callback is triggered
+    # periodically. A value of 0 turns the callback off.
+    # 
+    # If the `value has to change`-parameter is set to true, the callback is only
+    # triggered after the value has changed. If the value didn't change
+    # within the period, the callback is triggered immediately on change.
+    # 
+    # If it is set to false, the callback is continuously triggered with the period,
+    # independent of the value.
+    # 
+    # It is furthermore possible to constrain the callback with thresholds.
+    # 
+    # The `option`-parameter together with min/max sets a threshold for the CALLBACK_ILLUMINANCE callback.
+    # 
+    # The following options are possible:
+    # 
+    #  "Option", "Description"
+    # 
+    #  "'x'",    "Threshold is turned off"
+    #  "'o'",    "Threshold is triggered when the value is *outside* the min and max values"
+    #  "'i'",    "Threshold is triggered when the value is *inside* or equal to the min and max values"
+    #  "'<'",    "Threshold is triggered when the value is smaller than the min value (max is ignored)"
+    #  "'>'",    "Threshold is triggered when the value is greater than the min value (max is ignored)"
+    # 
+    # If the option is set to 'x' (threshold turned off) the callback is triggered with the fixed period.
+    # 
+    # The default value is (0, false, 'x', 0, 0).
+    def set_illuminance_callback_configuration(period, value_has_to_change, option, min, max)
+      send_request FUNCTION_SET_ILLUMINANCE_CALLBACK_CONFIGURATION, [period, value_has_to_change, option, min, max], 'L ? k L L', 0, ''
+    end
+
+    # Returns the callback configuration as set by BrickletAmbientLightV3#set_illuminance_callback_configuration.
+    def get_illuminance_callback_configuration
+      send_request FUNCTION_GET_ILLUMINANCE_CALLBACK_CONFIGURATION, [], '', 14, 'L ? k L L'
+    end
+
+    # Sets the configuration. It is possible to configure an illuminance range
+    # between 0-600lux and 0-64000lux and an integration time between 50ms and 400ms.
+    # 
+    # The unlimited illuminance range allows to measure up to about 100000lux, but
+    # above 64000lux the precision starts to drop.
+    # 
+    # A smaller illuminance range increases the resolution of the data. A longer
+    # integration time will result in less noise on the data.
+    # 
+    # If the actual measure illuminance is out-of-range then the current illuminance
+    # range maximum +0.01lux is reported by BrickletAmbientLightV3#get_illuminance and the
+    # CALLBACK_ILLUMINANCE callback. For example, 800001 for the 0-8000lux range.
+    # 
+    # With a long integration time the sensor might be saturated before the measured
+    # value reaches the maximum of the selected illuminance range. In this case 0lux
+    # is reported by BrickletAmbientLightV3#get_illuminance and the CALLBACK_ILLUMINANCE callback.
+    # 
+    # If the measurement is out-of-range or the sensor is saturated then you should
+    # configure the next higher illuminance range. If the highest range is already
+    # in use, then start to reduce the integration time.
+    # 
+    # The default values are 0-8000lux illuminance range and 150ms integration time.
+    def set_configuration(illuminance_range, integration_time)
+      send_request FUNCTION_SET_CONFIGURATION, [illuminance_range, integration_time], 'C C', 0, ''
+    end
+
+    # Returns the configuration as set by BrickletAmbientLightV3#set_configuration.
+    def get_configuration
+      send_request FUNCTION_GET_CONFIGURATION, [], '', 2, 'C C'
+    end
+
+    # Returns the error count for the communication between Brick and Bricklet.
+    # 
+    # The errors are divided into
+    # 
+    # * ACK checksum errors,
+    # * message checksum errors,
+    # * framing errors and
+    # * overflow errors.
+    # 
+    # The errors counts are for errors that occur on the Bricklet side. All
+    # Bricks have a similar function that returns the errors on the Brick side.
+    def get_spitfp_error_count
+      send_request FUNCTION_GET_SPITFP_ERROR_COUNT, [], '', 16, 'L L L L'
+    end
+
+    # Sets the bootloader mode and returns the status after the requested
+    # mode change was instigated.
+    # 
+    # You can change from bootloader mode to firmware mode and vice versa. A change
+    # from bootloader mode to firmware mode will only take place if the entry function,
+    # device identifier and CRC are present and correct.
+    # 
+    # This function is used by Brick Viewer during flashing. It should not be
+    # necessary to call it in a normal user program.
+    def set_bootloader_mode(mode)
+      send_request FUNCTION_SET_BOOTLOADER_MODE, [mode], 'C', 1, 'C'
+    end
+
+    # Returns the current bootloader mode, see BrickletAmbientLightV3#set_bootloader_mode.
+    def get_bootloader_mode
+      send_request FUNCTION_GET_BOOTLOADER_MODE, [], '', 1, 'C'
+    end
+
+    # Sets the firmware pointer for BrickletAmbientLightV3#write_firmware. The pointer has
+    # to be increased by chunks of size 64. The data is written to flash
+    # every 4 chunks (which equals to one page of size 256).
+    # 
+    # This function is used by Brick Viewer during flashing. It should not be
+    # necessary to call it in a normal user program.
+    def set_write_firmware_pointer(pointer)
+      send_request FUNCTION_SET_WRITE_FIRMWARE_POINTER, [pointer], 'L', 0, ''
+    end
+
+    # Writes 64 Bytes of firmware at the position as written by
+    # BrickletAmbientLightV3#set_write_firmware_pointer before. The firmware is written
+    # to flash every 4 chunks.
+    # 
+    # You can only write firmware in bootloader mode.
+    # 
+    # This function is used by Brick Viewer during flashing. It should not be
+    # necessary to call it in a normal user program.
+    def write_firmware(data)
+      send_request FUNCTION_WRITE_FIRMWARE, [data], 'C64', 1, 'C'
+    end
+
+    # Sets the status LED configuration. By default the LED shows
+    # communication traffic between Brick and Bricklet, it flickers once
+    # for every 10 received data packets.
+    # 
+    # You can also turn the LED permanently on/off or show a heartbeat.
+    # 
+    # If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.
+    def set_status_led_config(config)
+      send_request FUNCTION_SET_STATUS_LED_CONFIG, [config], 'C', 0, ''
+    end
+
+    # Returns the configuration as set by BrickletAmbientLightV3#set_status_led_config
+    def get_status_led_config
+      send_request FUNCTION_GET_STATUS_LED_CONFIG, [], '', 1, 'C'
+    end
+
+    # Returns the temperature in °C as measured inside the microcontroller. The
+    # value returned is not the ambient temperature!
+    # 
+    # The temperature is only proportional to the real temperature and it has bad
+    # accuracy. Practically it is only useful as an indicator for
+    # temperature changes.
+    def get_chip_temperature
+      send_request FUNCTION_GET_CHIP_TEMPERATURE, [], '', 2, 's'
+    end
+
+    # Calling this function will reset the Bricklet. All configurations
+    # will be lost.
+    # 
+    # After a reset you have to create new device objects,
+    # calling functions on the existing ones will result in
+    # undefined behavior!
+    def reset
+      send_request FUNCTION_RESET, [], '', 0, ''
+    end
+
+    # Writes a new UID into flash. If you want to set a new UID
+    # you have to decode the Base58 encoded UID string into an
+    # integer first.
+    # 
+    # We recommend that you use Brick Viewer to change the UID.
+    def write_uid(uid)
+      send_request FUNCTION_WRITE_UID, [uid], 'L', 0, ''
+    end
+
+    # Returns the current UID as an integer. Encode as
+    # Base58 to get the usual string version.
+    def read_uid
+      send_request FUNCTION_READ_UID, [], '', 4, 'L'
+    end
+
+    # Returns the UID, the UID where the Bricklet is connected to,
+    # the position, the hardware and firmware version as well as the
+    # device identifier.
+    # 
+    # The position can be 'a', 'b', 'c' or 'd'.
+    # 
+    # The device identifier numbers can be found :ref:`here <device_identifier>`.
+    # |device_identifier_constant|
+    def get_identity
+      send_request FUNCTION_GET_IDENTITY, [], '', 25, 'Z8 Z8 k C3 C3 S'
+    end
+
+    # Registers a callback with ID <tt>id</tt> to the block <tt>block</tt>.
+    def register_callback(id, &block)
+      callback = block
+      @registered_callbacks[id] = callback
+    end
+  end
+end

data/lib/tinkerforge/bricklet_analog_in.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_analog_in_v2.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_analog_in_v3.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_analog_out.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_analog_out_v2.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_analog_out_v3.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_barometer.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #

data/lib/tinkerforge/bricklet_barometer_v2.rb

@@ -1,8 +1,8 @@
 # -*- ruby encoding: utf-8 -*-
 #############################################################
-# This file was automatically generated on 2018-11-28.      #
+# This file was automatically generated on 2019-01-29.      #
 #                                                           #
-# Ruby Bindings Version 2.1.20                              #
+# Ruby Bindings Version 2.1.21                              #
 #                                                           #
 # If you have a bugfix for this file and want to commit it, #
 # please fix the bug in the generator. You can find a link  #