thumbjive-koudoku 1.5.0

data/spec/dummy/config/boot.rb

@@ -0,0 +1,10 @@
+require 'rubygems'
+gemfile = File.expand_path('../../../../Gemfile', __FILE__)
+
+if File.exist?(gemfile)
+  ENV['BUNDLE_GEMFILE'] = gemfile
+  require 'bundler'
+  Bundler.setup
+end
+
+$:.unshift File.expand_path('../../../../lib', __FILE__)

data/spec/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+development:
+  adapter: sqlite3
+  database: db/development.sqlite3
+  pool: 5
+  timeout: 5000
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  adapter: sqlite3
+  database: db/test.sqlite3
+  pool: 5
+  timeout: 5000
+
+production:
+  adapter: sqlite3
+  database: db/production.sqlite3
+  pool: 5
+  timeout: 5000

data/spec/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the rails application
+require File.expand_path('../application', __FILE__)
+
+# Initialize the rails application
+Dummy::Application.initialize!

data/spec/dummy/config/environments/development.rb

@@ -0,0 +1,32 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Log error messages when you accidentally call methods on nil.
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger
+  config.active_support.deprecation = :log
+
+  # Only use best-standards-support built into browsers
+  config.action_dispatch.best_standards_support = :builtin
+
+  # Do not compress assets
+  config.assets.compress = false
+
+  # Expands the lines which load the assets
+  config.assets.debug = true
+
+  config.eager_load = false
+end

data/spec/dummy/config/environments/production.rb

@@ -0,0 +1,69 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # Code is not reloaded between requests
+  config.cache_classes = true
+
+  # Full error reports are disabled and caching is turned on
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this)
+  config.serve_static_assets = false
+
+  # Compress JavaScripts and CSS
+  config.assets.compress = true
+
+  # Don't fallback to assets pipeline if a precompiled asset is missed
+  config.assets.compile = false
+
+  # Generate digests for assets URLs
+  config.assets.digest = true
+
+  # Defaults to nil and saved in location specified by config.assets.prefix
+  # config.assets.manifest = YOUR_PATH
+
+  # Specifies the header that your server uses for sending files
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # See everything in the log (default is :info)
+  # config.log_level = :debug
+
+  # Prepend all log lines with the following tags
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Precompile additional assets (application.js, application.css, and all non-JS/CSS are already added)
+  # config.assets.precompile += %w( search.js )
+
+  # Disable delivery errors, bad email addresses will be ignored
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable threaded mode
+  # config.threadsafe!
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation can not be found)
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners
+  config.active_support.deprecation = :notify
+
+  # Log the query plan for queries taking more than this (works
+  # with SQLite, MySQL, and PostgreSQL)
+  # config.active_record.auto_explain_threshold_in_seconds = 0.5
+
+  config.eager_load = true
+end

data/spec/dummy/config/environments/test.rb

@@ -0,0 +1,36 @@
+Dummy::Application.configure do
+  # Settings specified here will take precedence over those in config/application.rb
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Configure static asset server for tests with Cache-Control for performance
+  config.serve_static_assets = true
+  config.static_cache_control = "public, max-age=3600"
+
+  # Log error messages when you accidentally call methods on nil
+  config.whiny_nils = true
+
+  # Show full error reports and disable caching
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment
+  config.action_controller.allow_forgery_protection    = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr
+  config.active_support.deprecation = :stderr
+
+  config.eager_load = false
+end

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/spec/dummy/config/initializers/inflections.rb

@@ -0,0 +1,15 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format
+# (all these examples are active by default):
+# ActiveSupport::Inflector.inflections do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+#
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/spec/dummy/config/initializers/koudoku.rb

@@ -0,0 +1,7 @@
+Koudoku.setup do |config|
+  #config.webhooks_api_key = "2f1a9b40-abe4-4bbc-86c8-8e7bd000c8b3"
+  config.subscriptions_owned_by = :customer
+  config.stripe_publishable_key = 'not_stripe_publishable_key'
+  config.stripe_secret_key = 'not_stripe_secret_key'
+  config.free_trial_length = 30
+end

data/spec/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf
+# Mime::Type.register_alias "text/html", :iphone

data/spec/dummy/config/initializers/secret_token.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+Dummy::Application.config.secret_token = 'f17802a0ebf013fd30a3b6e28cc89706e0b599a970701be06ad873245ecd4535b6cc22a69c3344ad0d91d5c63b85940d6809510af8619fea30e6e9881fe5d3c1'

data/spec/dummy/config/initializers/session_store.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+Dummy::Application.config.session_store :cookie_store, key: '_dummy_session'
+
+# Use the database for sessions instead of the cookie-based default,
+# which shouldn't be used to store highly confidential information
+# (create the session table with "rails generate session_migration")
+# Dummy::Application.config.session_store :active_record_store

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+#
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json]
+end
+
+# Disable root element in JSON by default.
+ActiveSupport.on_load(:active_record) do
+  self.include_root_in_json = false
+end

data/spec/dummy/config/locales/devise.en.yml

@@ -0,0 +1,59 @@
+# Additional translations at https://github.com/plataformatec/devise/wiki/I18n
+
+en:
+  devise:
+    confirmations:
+      confirmed: "Your account was successfully confirmed. You are now signed in."
+      send_instructions: "You will receive an email with instructions about how to confirm your account in a few minutes."
+      send_paranoid_instructions: "If your email address exists in our database, you will receive an email with instructions about how to confirm your account in a few minutes."
+    failure:
+      already_authenticated: "You are already signed in."
+      inactive: "Your account was not activated yet."
+      invalid: "Invalid email or password."
+      invalid_token: "Invalid authentication token."
+      locked: "Your account is locked."
+      not_found_in_database: "Invalid email or password."
+      timeout: "Your session expired, please sign in again to continue."
+      unauthenticated: "You need to sign in or sign up before continuing."
+      unconfirmed: "You have to confirm your account before continuing."
+    mailer:
+      confirmation_instructions:
+        subject: "Confirmation instructions"
+      reset_password_instructions:
+        subject: "Reset password instructions"
+      unlock_instructions:
+        subject: "Unlock Instructions"
+    omniauth_callbacks:
+      failure: "Could not authenticate you from %{kind} because \"%{reason}\"."
+      success: "Successfully authenticated from %{kind} account."
+    passwords:
+      no_token: "You can't access this page without coming from a password reset email. If you do come from a password reset email, please make sure you used the full URL provided."
+      send_instructions: "You will receive an email with instructions about how to reset your password in a few minutes."
+      send_paranoid_instructions: "If your email address exists in our database, you will receive a password recovery link at your email address in a few minutes."
+      updated: "Your password was changed successfully. You are now signed in."
+      updated_not_active: "Your password was changed successfully."
+    registrations:
+      destroyed: "Bye! Your account was successfully cancelled. We hope to see you again soon."
+      signed_up: "Welcome! You have signed up successfully."
+      signed_up_but_inactive: "You have signed up successfully. However, we could not sign you in because your account is not yet activated."
+      signed_up_but_locked: "You have signed up successfully. However, we could not sign you in because your account is locked."
+      signed_up_but_unconfirmed: "A message with a confirmation link has been sent to your email address. Please open the link to activate your account."
+      update_needs_confirmation: "You updated your account successfully, but we need to verify your new email address. Please check your email and click on the confirm link to finalize confirming your new email address."
+      updated: "You updated your account successfully."
+    sessions:
+      signed_in: "Signed in successfully."
+      signed_out: "Signed out successfully."
+    unlocks:
+      send_instructions: "You will receive an email with instructions about how to unlock your account in a few minutes."
+      send_paranoid_instructions: "If your account exists, you will receive an email with instructions about how to unlock it in a few minutes."
+      unlocked: "Your account has been unlocked successfully. Please sign in to continue."
+  errors:
+    messages:
+      already_confirmed: "was already confirmed, please try signing in"
+      confirmation_period_expired: "needs to be confirmed within %{period}, please request a new one"
+      expired: "has expired, please request a new one"
+      not_found: "not found"
+      not_locked: "was not locked"
+      not_saved:
+        one: "1 error prohibited this %{resource} from being saved:"
+        other: "%{count} errors prohibited this %{resource} from being saved:"

data/spec/dummy/config/locales/en.yml

@@ -0,0 +1,5 @@
+# Sample localization file for English. Add more files in this directory for other locales.
+# See https://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
+
+en:
+  hello: "Hello world"

data/spec/dummy/config/routes.rb

@@ -0,0 +1,6 @@
+Rails.application.routes.draw do
+  mount Koudoku::Engine, at: "koudoku"
+  scope module: 'koudoku' do
+    get 'pricing' => 'subscriptions#index', as: 'pricing'
+  end
+end

data/spec/dummy/db/migrate/20130318201927_create_customers.rb

@@ -0,0 +1,8 @@
+class CreateCustomers < ActiveRecord::Migration
+  def change
+    create_table :customers do |t|
+      t.string :email
+      t.timestamps
+    end
+  end
+end

data/spec/dummy/db/migrate/20130318204455_create_subscriptions.rb

@@ -0,0 +1,16 @@
+class CreateSubscriptions < ActiveRecord::Migration
+  def change
+    create_table :subscriptions do |t|
+      t.string :stripe_id
+      t.integer :plan_id
+      t.string :last_four
+      t.integer :coupon_id
+      t.string :last_four
+      t.string :card_type
+      t.float :current_price
+      t.integer :customer_id
+
+      t.timestamps
+    end
+  end
+end

data/spec/dummy/db/migrate/20130318204458_create_plans.rb

@@ -0,0 +1,14 @@
+class CreatePlans < ActiveRecord::Migration
+  def change
+    create_table :plans do |t|
+      t.string :name
+      t.string :stripe_id
+      t.float :price
+      t.text :features
+      t.boolean :highlight
+      t.integer :display_order
+
+      t.timestamps
+    end
+  end
+end

data/spec/dummy/db/migrate/20130318204502_create_coupons.rb

@@ -0,0 +1,10 @@
+class CreateCoupons < ActiveRecord::Migration
+  def change
+    create_table :coupons do |t|
+      t.string :code
+      t.string :free_trial_length
+
+      t.timestamps
+    end
+  end
+end

data/spec/dummy/db/migrate/20130520163946_add_interval_to_plan.rb

@@ -0,0 +1,5 @@
+class AddIntervalToPlan < ActiveRecord::Migration
+  def change
+    add_column :plans, :interval, :string
+  end
+end

data/spec/dummy/db/schema.rb

@@ -0,0 +1,53 @@
+# encoding: UTF-8
+# This file is auto-generated from the current state of the database. Instead
+# of editing this file, please use the migrations feature of Active Record to
+# incrementally modify your database, and then regenerate this schema definition.
+#
+# Note that this schema.rb definition is the authoritative source for your
+# database schema. If you need to create the application database on another
+# system, you should be using db:schema:load, not running all the migrations
+# from scratch. The latter is a flawed and unsustainable approach (the more migrations
+# you'll amass, the slower it'll run and the greater likelihood for issues).
+#
+# It's strongly recommended to check this file into your version control system.
+
+ActiveRecord::Schema.define(:version => 20130520163946) do
+
+  create_table "coupons", :force => true do |t|
+    t.string   "code"
+    t.string   "free_trial_length"
+    t.datetime "created_at",        :null => false
+    t.datetime "updated_at",        :null => false
+  end
+
+  create_table "customers", :force => true do |t|
+    t.string   "email"
+    t.datetime "created_at", :null => false
+    t.datetime "updated_at", :null => false
+  end
+
+  create_table "plans", :force => true do |t|
+    t.string   "name"
+    t.string   "stripe_id"
+    t.float    "price"
+    t.text     "features"
+    t.boolean  "highlight"
+    t.integer  "display_order"
+    t.datetime "created_at",    :null => false
+    t.datetime "updated_at",    :null => false
+    t.string   "interval"
+  end
+
+  create_table "subscriptions", :force => true do |t|
+    t.string   "stripe_id"
+    t.integer  "plan_id"
+    t.string   "last_four"
+    t.integer  "coupon_id"
+    t.string   "card_type"
+    t.float    "current_price"
+    t.integer  "customer_id"
+    t.datetime "created_at",    :null => false
+    t.datetime "updated_at",    :null => false
+  end
+
+end