telnyx 5.171.0 → 5.174.0

data/rbi/telnyx/resources/uac_connections.rbi

@@ -18,6 +18,7 @@ module Telnyx
           active: T::Boolean,
           anchorsite_override: Telnyx::AnchorsiteOverride::OrSymbol,
           android_push_credential_id: T.nilable(String),
+          bridge_generate_comfort_noise_on_cn: T::Boolean,
           call_cost_in_webhooks: T::Boolean,
           default_on_hold_comfort_noise_enabled: T::Boolean,
           dtmf_type: Telnyx::DtmfType::OrSymbol,
@@ -58,6 +59,14 @@ module Telnyx
         anchorsite_override: nil,
         # The uuid of the push credential for Android
         android_push_credential_id: nil,
+        # Stores the connection preference for generating silent RTP toward the opposite
+        # call leg when comfort-noise packets (CN, payload type 13) are received during
+        # hold. Optional; defaults to false when omitted on creation. Only JSON true and
+        # false are accepted; null and non-boolean values are rejected. This preference is
+        # independent of default_on_hold_comfort_noise_enabled and does not modify that
+        # setting. This API provisions the preference; call-processing behavior is
+        # implemented separately.
+        bridge_generate_comfort_noise_on_cn: nil,
         # Specifies if call cost webhooks should be sent for this connection.
         call_cost_in_webhooks: nil,
         # When enabled, Telnyx will generate comfort noise when you place the call on
@@ -70,8 +79,8 @@ module Telnyx
         # Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
         # scenarios.
         encode_contact_header_enabled: nil,
-        # Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
-        # TLS.
+        # Enable use of SRTP for encryption. Can only be set when the SIP signaling
+        # transport protocol is TLS.
         encrypted_media: nil,
         # External SIP peer settings used by Telnyx when registering to your PBX and
         # routing outbound calls.
@@ -157,6 +166,7 @@ module Telnyx
           active: T::Boolean,
           anchorsite_override: Telnyx::AnchorsiteOverride::OrSymbol,
           android_push_credential_id: T.nilable(String),
+          bridge_generate_comfort_noise_on_cn: T::Boolean,
           call_cost_in_webhooks: T::Boolean,
           connection_name: String,
           default_on_hold_comfort_noise_enabled: T::Boolean,
@@ -198,6 +208,14 @@ module Telnyx
         anchorsite_override: nil,
         # The uuid of the push credential for Android
         android_push_credential_id: nil,
+        # Stores the connection preference for generating silent RTP toward the opposite
+        # call leg when comfort-noise packets (CN, payload type 13) are received during
+        # hold. Optional; omitting this field preserves the saved value. Only JSON true
+        # and false are accepted; null and non-boolean values are rejected. This
+        # preference is independent of default_on_hold_comfort_noise_enabled and does not
+        # modify that setting. This API provisions the preference; call-processing
+        # behavior is implemented separately.
+        bridge_generate_comfort_noise_on_cn: nil,
         # Specifies if call cost webhooks should be sent for this connection.
         call_cost_in_webhooks: nil,
         # A user-assigned name to help manage the connection.
@@ -212,8 +230,8 @@ module Telnyx
         # Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
         # scenarios.
         encode_contact_header_enabled: nil,
-        # Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
-        # TLS.
+        # Enable use of SRTP for encryption. Can only be set when the SIP signaling
+        # transport protocol is TLS.
         encrypted_media: nil,
         # External SIP peer settings used by Telnyx when registering to your PBX and
         # routing outbound calls.

data/rbi/telnyx/resources/voice_clones.rbi

@@ -50,6 +50,8 @@ module Telnyx
       # Returns a paginated list of voice clones belonging to the authenticated account.
       sig do
         params(
+          filter_model_id:
+            Telnyx::VoiceCloneListParams::FilterModelID::OrSymbol,
           filter_name: String,
           filter_provider:
             Telnyx::VoiceCloneListParams::FilterProvider::OrSymbol,
@@ -62,6 +64,8 @@ module Telnyx
         )
       end
       def list(
+        # Filter by TTS model. Case-insensitive.
+        filter_model_id: nil,
         # Case-insensitive substring filter on the name field.
         filter_name: nil,
         # Filter by voice synthesis provider. Case-insensitive.
@@ -88,24 +92,29 @@ module Telnyx
       end
 
       # Creates a new voice clone by uploading an audio file directly. Supported
-      # formats: WAV, MP3, FLAC, OGG, M4A. For best results, provide 5–60 seconds of
-      # clear speech (Ultra accepts up to 60 seconds; Qwen3TTS auto-trims to 10 seconds;
-      # Minimax accepts up to 5 minutes). Maximum file size: 5MB for Telnyx, 20MB for
-      # Minimax.
+      # formats: WAV, MP3, FLAC, OGG, M4A. Maximum file size: 20MB. Reference audio is
+      # trimmed per model: Qwen3TTS, Bayan, and Resemble use the first 10 seconds, Ultra
+      # uses up to 60 seconds, and Minimax accepts 10 seconds to 5 minutes. Ultra clones
+      # return `202` with status `pending`; all other models return `201` with status
+      # `active`. Bayan clones require `ref_text` (the exact transcript of the reference
+      # audio) and support `ar` (default) and `en` only. Resemble clones
+      # (`provider: resemble`) take `model_id` `Pro`, `Turbo`, or `Urdu`.
       sig do
         params(
           voice_clone_upload_request:
             T.any(
               Telnyx::VoiceCloneCreateFromUploadParams::VoiceCloneUploadRequest::TelnyxQwen3TtsClone::OrHash,
               Telnyx::VoiceCloneCreateFromUploadParams::VoiceCloneUploadRequest::TelnyxUltraClone::OrHash,
-              Telnyx::VoiceCloneCreateFromUploadParams::VoiceCloneUploadRequest::MinimaxClone::OrHash
+              Telnyx::VoiceCloneCreateFromUploadParams::VoiceCloneUploadRequest::TelnyxBayanClone::OrHash,
+              Telnyx::VoiceCloneCreateFromUploadParams::VoiceCloneUploadRequest::MinimaxClone::OrHash,
+              Telnyx::VoiceCloneCreateFromUploadParams::VoiceCloneUploadRequest::ResembleClone::OrHash
             ),
           request_options: Telnyx::RequestOptions::OrHash
         ).returns(Telnyx::VoiceCloneResponse)
       end
       def create_from_upload(
         # Multipart form data for creating a voice clone from a direct audio upload.
-        # Maximum file size: 5MB for Telnyx, 20MB for Minimax.
+        # Maximum file size: 20MB.
         voice_clone_upload_request:,
         request_options: {}
       )

data/rbi/telnyx/resources/webhooks.rbi

@@ -11,6 +11,7 @@ module Telnyx
             Telnyx::CallAIGatherPartialResultsWebhookEvent,
             Telnyx::ArtifactCompletedWebhookEvent,
             Telnyx::ArtifactFailedWebhookEvent,
+            Telnyx::CallAnalyzedWebhookEvent,
             Telnyx::CallAnsweredWebhookEvent,
             Telnyx::CallBridgedWebhookEvent,
             Telnyx::CallConversationCreatedWebhookEvent,
@@ -81,7 +82,6 @@ module Telnyx
             Telnyx::NumberReputationExternalVerificationStatusChangedWebhookEvent,
             Telnyx::NumberReputationNumberFlaggedWebhookEvent,
             Telnyx::NumberReputationNumberRemovedWebhookEvent,
-            Telnyx::RecordingAvailableWebhookEvent,
             Telnyx::ReplacedLinkClickWebhookEvent,
             Telnyx::SessionStatusChangedWebhookEvent,
             Telnyx::TranscriptCompletedWebhookEvent,
@@ -110,6 +110,7 @@ module Telnyx
             Telnyx::CallAIGatherPartialResultsWebhookEvent,
             Telnyx::ArtifactCompletedWebhookEvent,
             Telnyx::ArtifactFailedWebhookEvent,
+            Telnyx::CallAnalyzedWebhookEvent,
             Telnyx::CallAnsweredWebhookEvent,
             Telnyx::CallBridgedWebhookEvent,
             Telnyx::CallConversationCreatedWebhookEvent,
@@ -180,7 +181,6 @@ module Telnyx
             Telnyx::NumberReputationExternalVerificationStatusChangedWebhookEvent,
             Telnyx::NumberReputationNumberFlaggedWebhookEvent,
             Telnyx::NumberReputationNumberRemovedWebhookEvent,
-            Telnyx::RecordingAvailableWebhookEvent,
             Telnyx::ReplacedLinkClickWebhookEvent,
             Telnyx::SessionStatusChangedWebhookEvent,
             Telnyx::TranscriptCompletedWebhookEvent,

data/rbi/telnyx/resources/whatsapp/business_accounts/phone_numbers.rbi

@@ -14,7 +14,7 @@ module Telnyx
               request_options: Telnyx::RequestOptions::OrHash
             ).returns(
               Telnyx::Internal::DefaultFlatPagination[
-                Telnyx::Models::Whatsapp::BusinessAccounts::PhoneNumberListResponse
+                Telnyx::Whatsapp::WhatsappPhoneResponse
               ]
             )
           end

data/rbi/telnyx/resources/whatsapp/hosted_signups.rbi

@@ -0,0 +1,71 @@
+# typed: strong
+
+module Telnyx
+  module Resources
+    class Whatsapp
+      class HostedSignups
+        # Create a time-limited onboarding URL on the Telnyx-hosted Embedded Signup page
+        # for a Tech Provider's end customer. Set `signup_type` to `coexistence` to launch
+        # Meta's WhatsApp Business app coexistence flow instead of standard Cloud API
+        # onboarding.
+        sig do
+          params(
+            app_id: String,
+            expires_at: Time,
+            signup_type:
+              Telnyx::Whatsapp::HostedSignupCreateParams::SignupType::OrSymbol,
+            request_options: Telnyx::RequestOptions::OrHash
+          ).returns(Telnyx::Models::Whatsapp::HostedSignupCreateResponse)
+        end
+        def create(
+          # Meta App ID linked to the Telnyx account or its manager account. The app must be
+          # enabled.
+          app_id:,
+          # When the onboarding URL expires, in RFC 3339 format. Must be in the future and
+          # at most 3 days ahead. Defaults to 24 hours after creation.
+          expires_at: nil,
+          # Onboarding flow the hosted page launches. Use `coexistence` for a number that
+          # remains active in the WhatsApp Business app.
+          signup_type: nil,
+          request_options: {}
+        )
+        end
+
+        # Retrieve a hosted signup and its onboarding URL.
+        sig do
+          params(
+            id: String,
+            request_options: Telnyx::RequestOptions::OrHash
+          ).returns(Telnyx::Models::Whatsapp::HostedSignupRetrieveResponse)
+        end
+        def retrieve(
+          # Hosted signup ID returned when the hosted signup was created
+          id,
+          request_options: {}
+        )
+        end
+
+        # List hosted signups created by the account, newest first. Expired hosted signups
+        # are included.
+        sig do
+          params(
+            page_number: Integer,
+            page_size: Integer,
+            request_options: Telnyx::RequestOptions::OrHash
+          ).returns(
+            Telnyx::Internal::DefaultFlatPagination[
+              Telnyx::Whatsapp::WhatsappHostedSignup
+            ]
+          )
+        end
+        def list(page_number: nil, page_size: nil, request_options: {})
+        end
+
+        # @api private
+        sig { params(client: Telnyx::Client).returns(T.attached_class) }
+        def self.new(client:)
+        end
+      end
+    end
+  end
+end

data/rbi/telnyx/resources/whatsapp/phone_numbers.rbi

@@ -37,7 +37,7 @@ module Telnyx
             request_options: Telnyx::RequestOptions::OrHash
           ).returns(
             Telnyx::Internal::DefaultFlatPagination[
-              Telnyx::Models::Whatsapp::PhoneNumberListResponse
+              Telnyx::Whatsapp::WhatsappPhoneResponse
             ]
           )
         end

data/rbi/telnyx/resources/whatsapp.rbi

@@ -22,6 +22,9 @@ module Telnyx
       sig { returns(Telnyx::Resources::Whatsapp::Signup) }
       attr_reader :signup
 
+      sig { returns(Telnyx::Resources::Whatsapp::HostedSignups) }
+      attr_reader :hosted_signups
+
       # @api private
       sig { params(client: Telnyx::Client).returns(T.attached_class) }
       def self.new(client:)

data/sig/telnyx/client.rbs

@@ -16,6 +16,8 @@ module Telnyx
 
     attr_reader client_secret: String?
 
+    attr_reader browser_sessions: Telnyx::Resources::BrowserSessions
+
     attr_reader legacy: Telnyx::Resources::Legacy
 
     attr_reader oauth: Telnyx::Resources::OAuth
@@ -398,6 +400,20 @@ module Telnyx
 
     attr_reader sip_registration_status: Telnyx::Resources::SipRegistrationStatus
 
+    attr_reader dial_metrics: Telnyx::Resources::DialMetrics
+
+    attr_reader tailscale_subnet_routers: Telnyx::Resources::TailscaleSubnetRouters
+
+    attr_reader artifact_downloads: Telnyx::Resources::ArtifactDownloads
+
+    attr_reader email: Telnyx::Resources::Email
+
+    attr_reader network_routes: Telnyx::Resources::NetworkRoutes
+
+    attr_reader pay_connectors: Telnyx::Resources::PayConnectors
+
+    attr_reader tunnels: Telnyx::Resources::Tunnels
+
     private def auth_headers: -> ::Hash[String, String]
 
     private def bearer_auth: -> ::Hash[String, String]

data/sig/telnyx/models/addresses/action_validate_response.rbs

@@ -54,13 +54,12 @@ module Telnyx
             record_type: String
           }
 
-          type result = :valid | :invalid
+          type result = :valid
 
           module Result
             extend Telnyx::Internal::Type::Enum
 
             VALID: :valid
-            INVALID: :invalid
 
             def self?.values: -> ::Array[Telnyx::Models::Addresses::ActionValidateResponse::Data::result]
           end
@@ -68,9 +67,13 @@ module Telnyx
           type suggested =
             {
               administrative_area: String,
+              borough: String,
               country_code: String,
               extended_address: String,
+              latitude: Float?,
               locality: String,
+              longitude: Float?,
+              neighborhood: String,
               postal_code: String,
               street_address: String
             }
@@ -80,6 +83,10 @@ module Telnyx
 
             def administrative_area=: (String) -> String
 
+            attr_reader borough: String?
+
+            def borough=: (String) -> String
+
             attr_reader country_code: String?
 
             def country_code=: (String) -> String
@@ -88,10 +95,18 @@ module Telnyx
 
             def extended_address=: (String) -> String
 
+            attr_accessor latitude: Float?
+
             attr_reader locality: String?
 
             def locality=: (String) -> String
 
+            attr_accessor longitude: Float?
+
+            attr_reader neighborhood: String?
+
+            def neighborhood=: (String) -> String
+
             attr_reader postal_code: String?
 
             def postal_code=: (String) -> String
@@ -102,18 +117,26 @@ module Telnyx
 
             def initialize: (
               ?administrative_area: String,
+              ?borough: String,
               ?country_code: String,
               ?extended_address: String,
+              ?latitude: Float?,
               ?locality: String,
+              ?longitude: Float?,
+              ?neighborhood: String,
               ?postal_code: String,
               ?street_address: String
             ) -> void
 
             def to_hash: -> {
               administrative_area: String,
+              borough: String,
               country_code: String,
               extended_address: String,
+              latitude: Float?,
               locality: String,
+              longitude: Float?,
+              neighborhood: String,
               postal_code: String,
               street_address: String
             }

data/sig/telnyx/models/ai/assistant_tool.rbs

@@ -14,6 +14,7 @@ module Telnyx
         | Telnyx::AI::AssistantTool::SendDtmf
         | Telnyx::AI::AssistantTool::SendMessage
         | Telnyx::AI::AssistantTool::SkipTurn
+        | Telnyx::AI::AssistantTool::Vision
         | Telnyx::AI::AssistantTool::Pay
         | Telnyx::AI::AssistantTool::UpdateDynamicVariables
 
@@ -285,6 +286,7 @@ module Telnyx
             {
               from: String,
               targets: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::targets,
+              bridge_beep: Telnyx::AI::AssistantTool::Transfer::Transfer::BridgeBeep,
               custom_headers: ::Array[Telnyx::AI::AssistantTool::Transfer::Transfer::CustomHeader],
               description: String,
               diversion: String,
@@ -299,6 +301,12 @@ module Telnyx
 
             attr_accessor targets: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::targets
 
+            attr_reader bridge_beep: Telnyx::AI::AssistantTool::Transfer::Transfer::BridgeBeep?
+
+            def bridge_beep=: (
+              Telnyx::AI::AssistantTool::Transfer::Transfer::BridgeBeep
+            ) -> Telnyx::AI::AssistantTool::Transfer::Transfer::BridgeBeep
+
             attr_reader custom_headers: ::Array[Telnyx::AI::AssistantTool::Transfer::Transfer::CustomHeader]?
 
             def custom_headers=: (
@@ -334,6 +342,7 @@ module Telnyx
             def initialize: (
               from: String,
               targets: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::targets,
+              ?bridge_beep: Telnyx::AI::AssistantTool::Transfer::Transfer::BridgeBeep,
               ?custom_headers: ::Array[Telnyx::AI::AssistantTool::Transfer::Transfer::CustomHeader],
               ?description: String,
               ?diversion: String,
@@ -346,6 +355,7 @@ module Telnyx
             def to_hash: -> {
               from: String,
               targets: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::targets,
+              bridge_beep: Telnyx::AI::AssistantTool::Transfer::Transfer::BridgeBeep,
               custom_headers: ::Array[Telnyx::AI::AssistantTool::Transfer::Transfer::CustomHeader],
               description: String,
               diversion: String,
@@ -419,6 +429,45 @@ module Telnyx
               TargetsListArray: Telnyx::Internal::Type::Converter
             end
 
+            type bridge_beep =
+              {
+                enabled: bool,
+                target_legs: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::BridgeBeep::target_legs
+              }
+
+            class BridgeBeep < Telnyx::Internal::Type::BaseModel
+              attr_reader enabled: bool?
+
+              def enabled=: (bool) -> bool
+
+              attr_reader target_legs: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::BridgeBeep::target_legs?
+
+              def target_legs=: (
+                Telnyx::Models::AI::AssistantTool::Transfer::Transfer::BridgeBeep::target_legs
+              ) -> Telnyx::Models::AI::AssistantTool::Transfer::Transfer::BridgeBeep::target_legs
+
+              def initialize: (
+                ?enabled: bool,
+                ?target_legs: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::BridgeBeep::target_legs
+              ) -> void
+
+              def to_hash: -> {
+                enabled: bool,
+                target_legs: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::BridgeBeep::target_legs
+              }
+
+              type target_legs = :self | :both
+
+              module TargetLegs
+                extend Telnyx::Internal::Type::Enum
+
+                SELF: :self
+                BOTH: :both
+
+                def self?.values: -> ::Array[Telnyx::Models::AI::AssistantTool::Transfer::Transfer::BridgeBeep::target_legs]
+              end
+            end
+
             type custom_header = { name: String, value: String }
 
             class CustomHeader < Telnyx::Internal::Type::BaseModel
@@ -657,7 +706,9 @@ module Telnyx
             type warm_transfer_acceptance =
               {
                 enabled: bool,
-                end_user_target_context_mode: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode
+                end_user_target_context_mode: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode,
+                require_acceptance: bool,
+                timeout_secs: Integer
               }
 
             class WarmTransferAcceptance < Telnyx::Internal::Type::BaseModel
@@ -671,14 +722,26 @@ module Telnyx
                 Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode
               ) -> Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode
 
+              attr_reader require_acceptance: bool?
+
+              def require_acceptance=: (bool) -> bool
+
+              attr_reader timeout_secs: Integer?
+
+              def timeout_secs=: (Integer) -> Integer
+
               def initialize: (
                 ?enabled: bool,
-                ?end_user_target_context_mode: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode
+                ?end_user_target_context_mode: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode,
+                ?require_acceptance: bool,
+                ?timeout_secs: Integer
               ) -> void
 
               def to_hash: -> {
                 enabled: bool,
-                end_user_target_context_mode: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode
+                end_user_target_context_mode: Telnyx::Models::AI::AssistantTool::Transfer::Transfer::WarmTransferAcceptance::end_user_target_context_mode,
+                require_acceptance: bool,
+                timeout_secs: Integer
               }
 
               type end_user_target_context_mode = :private | :shared
@@ -1138,6 +1201,35 @@ module Telnyx
           end
         end
 
+        type vision =
+          { type: :vision, shared: bool, vision: Telnyx::AI::VisionToolParams }
+
+        class Vision < Telnyx::Internal::Type::BaseModel
+          attr_accessor type: :vision
+
+          attr_reader vision: Telnyx::AI::VisionToolParams?
+
+          def vision=: (
+            Telnyx::AI::VisionToolParams
+          ) -> Telnyx::AI::VisionToolParams
+
+          attr_reader shared: bool?
+
+          def shared=: (bool) -> bool
+
+          def initialize: (
+            ?shared: bool,
+            ?vision: Telnyx::AI::VisionToolParams,
+            ?type: :vision
+          ) -> void
+
+          def to_hash: -> {
+            type: :vision,
+            shared: bool,
+            vision: Telnyx::AI::VisionToolParams
+          }
+        end
+
         type pay = { pay: Telnyx::AI::PayToolParams, type: :pay, shared: bool }
 
         class Pay < Telnyx::Internal::Type::BaseModel

data/sig/telnyx/models/ai/audio_transcribe_params.rbs

@@ -80,6 +80,7 @@ module Telnyx
           | :"deepgram/nova-3-medical"
           | :"nvidia/parakeet-v3"
           | :"omi-health/omi-med-stt-v1"
+          | :"reson8/prerecorded"
 
         module Model
           extend Telnyx::Internal::Type::Enum
@@ -92,6 +93,7 @@ module Telnyx
           DEEPGRAM_NOVA_3_MEDICAL: :"deepgram/nova-3-medical"
           NVIDIA_PARAKEET_V3: :"nvidia/parakeet-v3"
           OMI_HEALTH_OMI_MED_STT_V1: :"omi-health/omi-med-stt-v1"
+          RESON8_PRERECORDED: :"reson8/prerecorded"
 
           def self?.values: -> ::Array[Telnyx::Models::AI::AudioTranscribeParams::model]
         end

data/sig/telnyx/models/ai/audio_transcribe_response.rbs

@@ -48,6 +48,7 @@ module Telnyx
             end_: Float,
             start: Float,
             text: String,
+            channel: Integer,
             speakers: ::Array[Integer],
             words: ::Array[Telnyx::AI::AudioTranscriptionResponseWord]
           }
@@ -61,6 +62,10 @@ module Telnyx
 
           attr_accessor text: String
 
+          attr_reader channel: Integer?
+
+          def channel=: (Integer) -> Integer
+
           attr_reader speakers: ::Array[Integer]?
 
           def speakers=: (::Array[Integer]) -> ::Array[Integer]
@@ -76,6 +81,7 @@ module Telnyx
             end_: Float,
             start: Float,
             text: String,
+            ?channel: Integer,
             ?speakers: ::Array[Integer],
             ?words: ::Array[Telnyx::AI::AudioTranscriptionResponseWord]
           ) -> void
@@ -85,6 +91,7 @@ module Telnyx
             end_: Float,
             start: Float,
             text: String,
+            channel: Integer,
             speakers: ::Array[Integer],
             words: ::Array[Telnyx::AI::AudioTranscriptionResponseWord]
           }