telnyx 5.168.0 → 5.170.0

data/rbi/telnyx/resources/texml/accounts/conferences/participants.rbi

@@ -159,8 +159,15 @@ module Telnyx
                 label: String,
                 machine_detection:
                   Telnyx::Texml::Accounts::Conferences::ParticipantParticipantsParams::MachineDetection::OrSymbol,
+                machine_detection_beep_max_frequency: Integer,
+                machine_detection_beep_min_frequency: Integer,
+                machine_detection_beep_min_tone_duration: Integer,
                 machine_detection_beep_profile:
                   Telnyx::Texml::Accounts::Conferences::ParticipantParticipantsParams::MachineDetectionBeepProfile::OrSymbol,
+                machine_detection_beep_spectral_confirmation: T::Boolean,
+                machine_detection_beep_spectral_min_purity: Float,
+                machine_detection_beep_spectral_reject_fax_cng: T::Boolean,
+                machine_detection_beep_spectral_window: Integer,
                 machine_detection_silence_timeout: Integer,
                 machine_detection_speech_end_threshold: Integer,
                 machine_detection_speech_threshold: Integer,
@@ -283,11 +290,36 @@ module Telnyx
               # is identified. Use `DetectMessageEnd`, if you would like to leave a message on
               # an answering machine.
               machine_detection: nil,
+              # Body param: Highest frequency, in Hz, that a tone can reach and still be treated
+              # as a beep. Only used when MachineDetection is enabled.
+              machine_detection_beep_max_frequency: nil,
+              # Body param: Lowest frequency, in Hz, that a tone must reach to be treated as a
+              # beep. Raising it above 480 excludes North American ringback (440 + 480 Hz),
+              # which can otherwise be reported as a beep when the `freq_only` profile is in
+              # use. Only used when MachineDetection is enabled.
+              machine_detection_beep_min_frequency: nil,
+              # Body param: Shortest tone, in milliseconds, that can be treated as a beep.
+              # Raising it rejects brief tones such as call-progress blips. Only used when
+              # MachineDetection is enabled.
+              machine_detection_beep_min_tone_duration: nil,
               # Body param: Selects which detectors must validate a beep. `both` requires the
               # amplitude and frequency detectors to agree. `freq_only` uses the frequency
               # detector alone, for beeps whose volume is too unsteady for the default profile.
               # Only used when MachineDetection is enabled.
               machine_detection_beep_profile: nil,
+              # Body param: When enabled, a candidate beep must pass an additional spectral
+              # check before it is reported. Only used when MachineDetection is enabled.
+              machine_detection_beep_spectral_confirmation: nil,
+              # Body param: Minimum spectral purity, from 0 to 1, for a tone to be treated as a
+              # beep. Raising it rejects mixed tones such as ringback, which combines two
+              # frequencies. Only used when MachineDetection is enabled.
+              machine_detection_beep_spectral_min_purity: nil,
+              # Body param: When enabled, the fax CNG tone is rejected rather than reported as a
+              # beep. Only used when MachineDetection is enabled.
+              machine_detection_beep_spectral_reject_fax_cng: nil,
+              # Body param: Length of the spectral confirmation window, in milliseconds. Only
+              # used when MachineDetection is enabled.
+              machine_detection_beep_spectral_window: nil,
               # Body param: If initial silence duration is greater than this value, consider it
               # a machine. Ignored when `premium` detection is used.
               machine_detection_silence_timeout: nil,

data/rbi/telnyx/resources/texml/calls.rbi

@@ -0,0 +1,50 @@
+# typed: strong
+
+module Telnyx
+  module Resources
+    class Texml
+      # TeXML REST Commands
+      class Calls
+        # Initiate an outbound TeXML call using a TeXML application connection ID, not an
+        # account SID. Request parameter names are case-sensitive. From and To are
+        # required; Texml supplies inline instructions and Url overrides the application
+        # XML request URL. When neither is supplied, the application configuration
+        # supplies the instructions. The response is a flat call object without a data
+        # wrapper.
+        sig do
+          params(
+            connection_id: String,
+            from: String,
+            to: String,
+            method_: Telnyx::Texml::CallCreateParams::Method::OrSymbol,
+            texml: String,
+            url: String,
+            request_options: Telnyx::RequestOptions::OrHash
+          ).returns(Telnyx::Models::Texml::CallCreateResponse)
+        end
+        def create(
+          # The ID of the connection holding the TeXML application to call from.
+          connection_id,
+          # The E.164-formatted phone number or SIP URI to present as the caller.
+          from:,
+          # The E.164-formatted phone number or SIP URI to call.
+          to:,
+          # HTTP method used to retrieve TeXML instructions from Url.
+          method_: nil,
+          # Inline TeXML instructions to execute when the call is answered.
+          texml: nil,
+          # The URL from which to retrieve TeXML instructions. Overrides the TeXML
+          # application XML request URL.
+          url: nil,
+          request_options: {}
+        )
+        end
+
+        # @api private
+        sig { params(client: Telnyx::Client).returns(T.attached_class) }
+        def self.new(client:)
+        end
+      end
+    end
+  end
+end

data/rbi/telnyx/resources/texml.rbi

@@ -4,6 +4,10 @@ module Telnyx
   module Resources
     # TeXML REST Commands
     class Texml
+      # TeXML REST Commands
+      sig { returns(Telnyx::Resources::Texml::Calls) }
+      attr_reader :calls
+
       # TeXML REST Commands
       sig { returns(Telnyx::Resources::Texml::Accounts) }
       attr_reader :accounts
@@ -46,8 +50,15 @@ module Telnyx
             Telnyx::TexmlInitiateAICallParams::DetectionMode::OrSymbol,
           machine_detection:
             Telnyx::TexmlInitiateAICallParams::MachineDetection::OrSymbol,
+          machine_detection_beep_max_frequency: Integer,
+          machine_detection_beep_min_frequency: Integer,
+          machine_detection_beep_min_tone_duration: Integer,
           machine_detection_beep_profile:
             Telnyx::TexmlInitiateAICallParams::MachineDetectionBeepProfile::OrSymbol,
+          machine_detection_beep_spectral_confirmation: T::Boolean,
+          machine_detection_beep_spectral_min_purity: Float,
+          machine_detection_beep_spectral_reject_fax_cng: T::Boolean,
+          machine_detection_beep_spectral_window: Integer,
           machine_detection_prompt_end_timeout: Integer,
           machine_detection_silence_timeout: Integer,
           machine_detection_speech_end_threshold: Integer,
@@ -124,11 +135,36 @@ module Telnyx
         detection_mode: nil,
         # Enables Answering Machine Detection.
         machine_detection: nil,
+        # Highest frequency, in Hz, that a tone can reach and still be treated as a beep.
+        # Only used when MachineDetection is enabled.
+        machine_detection_beep_max_frequency: nil,
+        # Lowest frequency, in Hz, that a tone must reach to be treated as a beep. Raising
+        # it above 480 excludes North American ringback (440 + 480 Hz), which can
+        # otherwise be reported as a beep when the `freq_only` profile is in use. Only
+        # used when MachineDetection is enabled.
+        machine_detection_beep_min_frequency: nil,
+        # Shortest tone, in milliseconds, that can be treated as a beep. Raising it
+        # rejects brief tones such as call-progress blips. Only used when MachineDetection
+        # is enabled.
+        machine_detection_beep_min_tone_duration: nil,
         # Selects which detectors must validate a beep. `both` requires the amplitude and
         # frequency detectors to agree. `freq_only` uses the frequency detector alone, for
         # beeps whose volume is too unsteady for the default profile. Only used when
         # MachineDetection is enabled.
         machine_detection_beep_profile: nil,
+        # When enabled, a candidate beep must pass an additional spectral check before it
+        # is reported. Only used when MachineDetection is enabled.
+        machine_detection_beep_spectral_confirmation: nil,
+        # Minimum spectral purity, from 0 to 1, for a tone to be treated as a beep.
+        # Raising it rejects mixed tones such as ringback, which combines two frequencies.
+        # Only used when MachineDetection is enabled.
+        machine_detection_beep_spectral_min_purity: nil,
+        # When enabled, the fax CNG tone is rejected rather than reported as a beep. Only
+        # used when MachineDetection is enabled.
+        machine_detection_beep_spectral_reject_fax_cng: nil,
+        # Length of the spectral confirmation window, in milliseconds. Only used when
+        # MachineDetection is enabled.
+        machine_detection_beep_spectral_window: nil,
         # Silence duration threshold after a call screening prompt before ending prompt
         # detection, in milliseconds. Used when `DetectionMode` is `PremiumCallScreening`.
         machine_detection_prompt_end_timeout: nil,

data/rbi/telnyx/resources/text_to_speech.rbi

@@ -17,7 +17,7 @@ module Telnyx
       # parameters.
       #
       # Supported providers: `aws`, `telnyx`, `azure`, `elevenlabs`, `minimax`,
-      # `resemble`, `xai`, `humain`.
+      # `resemble`, `xai`, `humain`, `soniox`.
       #
       # The Telnyx `Ultra` model supports 44 languages with emotion control, speed
       # adjustment, and volume control. Use the `telnyx` provider-specific parameters to
@@ -38,6 +38,7 @@ module Telnyx
             ::Telnyx::TextToSpeechGenerateSpeechParams::Provider::OrSymbol,
           resemble:
             ::Telnyx::TextToSpeechGenerateSpeechParams::Resemble::OrHash,
+          soniox: ::Telnyx::TextToSpeechGenerateSpeechParams::Soniox::OrHash,
           telnyx: ::Telnyx::TextToSpeechGenerateSpeechParams::Telnyx::OrHash,
           text: String,
           text_type:
@@ -72,6 +73,9 @@ module Telnyx
         provider: nil,
         # Resemble AI provider-specific parameters.
         resemble: nil,
+        # Soniox provider-specific parameters. Every voice speaks all supported languages;
+        # set `language` to the language of the text.
+        soniox: nil,
         # Telnyx provider-specific parameters. For the `Ultra` model, use `voice_speed`,
         # `volume`, and `emotion`. `Bayan` and `Sukhan` don't use `temperature`, `volume`,
         # or `emotion`, and don't support `voice_speed`. `Sukhan`'s `response_format` is
@@ -123,8 +127,8 @@ module Telnyx
       # `Authorization: Bearer <API_KEY>` header. Send JSON frames with text to
       # synthesize; receive JSON frames containing base64-encoded audio chunks.
       #
-      # Supported providers: `aws`, `telnyx`, `azure`, `murfai`, `minimax`, `resemble`,
-      # `elevenlabs`, `xai`, `humain`.
+      # Supported providers: `aws`, `telnyx`, `azure`, `minimax`, `resemble`,
+      # `elevenlabs`, `xai`, `humain`, `soniox`.
       #
       # **Connection flow:**
       #

data/rbi/telnyx/resources/voice_clones.rbi

@@ -88,8 +88,10 @@ module Telnyx
       end
 
       # Creates a new voice clone by uploading an audio file directly. Supported
-      # formats: WAV, MP3, FLAC, OGG, M4A. For best results, provide 5–10 seconds of
-      # clear speech. Maximum file size: 5MB for Telnyx, 20MB for Minimax.
+      # formats: WAV, MP3, FLAC, OGG, M4A. For best results, provide 5–60 seconds of
+      # clear speech (Ultra accepts up to 60 seconds; Qwen3TTS auto-trims to 10 seconds;
+      # Minimax accepts up to 5 minutes). Maximum file size: 5MB for Telnyx, 20MB for
+      # Minimax.
       sig do
         params(
           voice_clone_upload_request:

data/sig/telnyx/client.rbs

@@ -382,6 +382,16 @@ module Telnyx
 
     attr_reader compute: Telnyx::Resources::Compute
 
+    attr_reader noise_suppression_engines: Telnyx::Resources::NoiseSuppressionEngines
+
+    attr_reader bot_challenge: Telnyx::Resources::BotChallenge
+
+    attr_reader bot_sessions: Telnyx::Resources::BotSessions
+
+    attr_reader bot_signup: Telnyx::Resources::BotSignup
+
+    attr_reader machine_payments: Telnyx::Resources::MachinePayments
+
     private def auth_headers: -> ::Hash[String, String]
 
     private def bearer_auth: -> ::Hash[String, String]

data/sig/telnyx/models/ai/assistant_create_params.rbs

@@ -30,7 +30,7 @@ module Telnyx
           tool_ids: ::Array[String],
           tools: ::Array[Telnyx::Models::AI::assistant_tool],
           transcription: Telnyx::AI::TranscriptionSettings,
-          voice_settings: Telnyx::AI::VoiceSettings,
+          voice_settings: Telnyx::AI::InferenceEmbeddingVoiceSettings,
           widget_settings: Telnyx::AI::WidgetSettings,
           idempotency_key: String
         }
@@ -176,11 +176,11 @@ module Telnyx
           Telnyx::AI::TranscriptionSettings
         ) -> Telnyx::AI::TranscriptionSettings
 
-        attr_reader voice_settings: Telnyx::AI::VoiceSettings?
+        attr_reader voice_settings: Telnyx::AI::InferenceEmbeddingVoiceSettings?
 
         def voice_settings=: (
-          Telnyx::AI::VoiceSettings
-        ) -> Telnyx::AI::VoiceSettings
+          Telnyx::AI::InferenceEmbeddingVoiceSettings
+        ) -> Telnyx::AI::InferenceEmbeddingVoiceSettings
 
         attr_reader widget_settings: Telnyx::AI::WidgetSettings?
 
@@ -220,7 +220,7 @@ module Telnyx
           ?tool_ids: ::Array[String],
           ?tools: ::Array[Telnyx::Models::AI::assistant_tool],
           ?transcription: Telnyx::AI::TranscriptionSettings,
-          ?voice_settings: Telnyx::AI::VoiceSettings,
+          ?voice_settings: Telnyx::AI::InferenceEmbeddingVoiceSettings,
           ?widget_settings: Telnyx::AI::WidgetSettings,
           ?idempotency_key: String,
           ?request_options: Telnyx::request_opts
@@ -254,7 +254,7 @@ module Telnyx
           tool_ids: ::Array[String],
           tools: ::Array[Telnyx::Models::AI::assistant_tool],
           transcription: Telnyx::AI::TranscriptionSettings,
-          voice_settings: Telnyx::AI::VoiceSettings,
+          voice_settings: Telnyx::AI::InferenceEmbeddingVoiceSettings,
           widget_settings: Telnyx::AI::WidgetSettings,
           idempotency_key: String,
           request_options: Telnyx::RequestOptions