telnyx 5.131.0 → 5.147.0

data/lib/telnyx/models/uac_connection_list_response.rb

@@ -1,876 +0,0 @@
-# frozen_string_literal: true
-
-module Telnyx
-  module Models
-    # @see Telnyx::Resources::UacConnections#list
-    class UacConnectionListResponse < Telnyx::Internal::Type::BaseModel
-      # @!attribute id
-      #   Identifies the type of resource.
-      #
-      #   @return [String, nil]
-      optional :id, String
-
-      # @!attribute active
-      #   Defaults to true
-      #
-      #   @return [Boolean, nil]
-      optional :active, Telnyx::Internal::Type::Boolean
-
-      # @!attribute anchorsite_override
-      #   `Latency` directs Telnyx to route media through the site with the lowest
-      #   round-trip time to the user's connection. Telnyx calculates this time using ICMP
-      #   ping messages. This can be disabled by specifying a site to handle all media.
-      #
-      #   @return [Symbol, Telnyx::Models::AnchorsiteOverride, nil]
-      optional :anchorsite_override, enum: -> { Telnyx::AnchorsiteOverride }
-
-      # @!attribute android_push_credential_id
-      #   The uuid of the push credential for Android
-      #
-      #   @return [String, nil]
-      optional :android_push_credential_id, String, nil?: true
-
-      # @!attribute authentication
-      #   The authentication strategy used by this connection.
-      #
-      #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Authentication, nil]
-      optional :authentication, enum: -> { Telnyx::Models::UacConnectionListResponse::Authentication }
-
-      # @!attribute call_cost_in_webhooks
-      #   Specifies if call cost webhooks should be sent for this connection.
-      #
-      #   @return [Boolean, nil]
-      optional :call_cost_in_webhooks, Telnyx::Internal::Type::Boolean
-
-      # @!attribute connection_name
-      #
-      #   @return [String, nil]
-      optional :connection_name, String
-
-      # @!attribute created_at
-      #   ISO-8601 formatted date indicating when the resource was created.
-      #
-      #   @return [String, nil]
-      optional :created_at, String
-
-      # @!attribute default_on_hold_comfort_noise_enabled
-      #   When enabled, Telnyx will generate comfort noise when you place the call on
-      #   hold. If disabled, you will need to generate comfort noise or on hold music to
-      #   avoid RTP timeout.
-      #
-      #   @return [Boolean, nil]
-      optional :default_on_hold_comfort_noise_enabled, Telnyx::Internal::Type::Boolean
-
-      # @!attribute dtmf_type
-      #   Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
-      #   digits sent to Telnyx will be accepted in all formats.
-      #
-      #   @return [Symbol, Telnyx::Models::DtmfType, nil]
-      optional :dtmf_type, enum: -> { Telnyx::DtmfType }
-
-      # @!attribute encode_contact_header_enabled
-      #   Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG
-      #   scenarios.
-      #
-      #   @return [Boolean, nil]
-      optional :encode_contact_header_enabled, Telnyx::Internal::Type::Boolean
-
-      # @!attribute encrypted_media
-      #   Enable use of SRTP for encryption. Cannot be set if the transport_portocol is
-      #   TLS.
-      #
-      #   @return [Symbol, Telnyx::Models::EncryptedMedia, nil]
-      optional :encrypted_media, enum: -> { Telnyx::EncryptedMedia }, nil?: true
-
-      # @!attribute external_uac_settings
-      #   External SIP peer settings used by Telnyx when registering to your PBX and
-      #   routing outbound calls.
-      #
-      #   @return [Telnyx::Models::UacConnectionListResponse::ExternalUacSettings, nil]
-      optional :external_uac_settings, -> { Telnyx::Models::UacConnectionListResponse::ExternalUacSettings }
-
-      # @!attribute fqdn
-      #   The Telnyx-managed FQDN generated for the UAC connection.
-      #
-      #   @return [String, nil]
-      optional :fqdn, String
-
-      # @!attribute fqdn_outbound_authentication
-      #   The fixed outbound authentication mode used by UAC FQDN records.
-      #
-      #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::FqdnOutboundAuthentication, nil]
-      optional :fqdn_outbound_authentication,
-               enum: -> { Telnyx::Models::UacConnectionListResponse::FqdnOutboundAuthentication }
-
-      # @!attribute fqdns
-      #   FQDN records managed automatically by the UAC connection lifecycle.
-      #
-      #   @return [Array<Telnyx::Models::Fqdn>, nil]
-      optional :fqdns, -> { Telnyx::Internal::Type::ArrayOf[Telnyx::Fqdn] }
-
-      # @!attribute inbound
-      #
-      #   @return [Telnyx::Models::UacConnectionListResponse::Inbound, nil]
-      optional :inbound, -> { Telnyx::Models::UacConnectionListResponse::Inbound }
-
-      # @!attribute internal_uac_settings
-      #   Internal Telnyx-side settings for a UAC connection.
-      #
-      #   @return [Telnyx::Models::UacConnectionListResponse::InternalUacSettings, nil]
-      optional :internal_uac_settings, -> { Telnyx::Models::UacConnectionListResponse::InternalUacSettings }
-
-      # @!attribute ios_push_credential_id
-      #   The uuid of the push credential for Ios
-      #
-      #   @return [String, nil]
-      optional :ios_push_credential_id, String, nil?: true
-
-      # @!attribute jitter_buffer
-      #   Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams
-      #   of SIP Trunking calls. The feature is off unless enabled. You may define min and
-      #   max values in msec for customized buffering behaviors. Larger values add latency
-      #   but tolerate more jitter, while smaller values reduce latency but are more
-      #   sensitive to jitter and reordering.
-      #
-      #   @return [Telnyx::Models::ConnectionJitterBuffer, nil]
-      optional :jitter_buffer, -> { Telnyx::ConnectionJitterBuffer }
-
-      # @!attribute noise_suppression
-      #   Controls when noise suppression is applied to calls. When set to 'inbound',
-      #   noise suppression is applied to incoming audio. When set to 'outbound', it's
-      #   applied to outgoing audio. When set to 'both', it's applied in both directions.
-      #   When set to 'disabled', noise suppression is turned off.
-      #
-      #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::NoiseSuppression, nil]
-      optional :noise_suppression, enum: -> { Telnyx::Models::UacConnectionListResponse::NoiseSuppression }
-
-      # @!attribute noise_suppression_details
-      #   Configuration options for noise suppression. These settings are stored
-      #   regardless of the noise_suppression value, but only take effect when
-      #   noise_suppression is not 'disabled'. If you disable noise suppression and later
-      #   re-enable it, the previously configured settings will be used.
-      #
-      #   @return [Telnyx::Models::ConnectionNoiseSuppressionDetails, nil]
-      optional :noise_suppression_details, -> { Telnyx::ConnectionNoiseSuppressionDetails }
-
-      # @!attribute onnet_t38_passthrough_enabled
-      #   Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
-      #   if both are on the Telnyx network. If this is disabled, Telnyx will be able to
-      #   use T38 on just one leg of the call depending on each leg's settings.
-      #
-      #   @return [Boolean, nil]
-      optional :onnet_t38_passthrough_enabled, Telnyx::Internal::Type::Boolean
-
-      # @!attribute outbound
-      #
-      #   @return [Telnyx::Models::UacConnectionListResponse::Outbound, nil]
-      optional :outbound, -> { Telnyx::Models::UacConnectionListResponse::Outbound }
-
-      # @!attribute password
-      #   The password to be used as part of the credentials. Must be 8 to 128 characters
-      #   long.
-      #
-      #   @return [String, nil]
-      optional :password, String
-
-      # @!attribute record_type
-      #   Identifies the type of the resource.
-      #
-      #   @return [String, nil]
-      optional :record_type, String
-
-      # @!attribute registration_status
-      #   The most recently known SIP registration status for this UAC connection.
-      #
-      #   @return [String, nil]
-      optional :registration_status, String, nil?: true
-
-      # @!attribute registration_status_updated_at
-      #   ISO 8601 formatted date indicating when the registration status was last
-      #   updated.
-      #
-      #   @return [String, nil]
-      optional :registration_status_updated_at, String, nil?: true
-
-      # @!attribute rtcp_settings
-      #
-      #   @return [Telnyx::Models::ConnectionRtcpSettings, nil]
-      optional :rtcp_settings, -> { Telnyx::ConnectionRtcpSettings }
-
-      # @!attribute sip_uri_calling_preference
-      #   This feature enables inbound SIP URI calls to your Credential Auth Connection.
-      #   If enabled for all (unrestricted) then anyone who calls the SIP URI
-      #   <your-username>@telnyx.com will be connected to your Connection. You can also
-      #   choose to allow only calls that are originated on any Connections under your
-      #   account (internal).
-      #
-      #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::SipUriCallingPreference, nil]
-      optional :sip_uri_calling_preference,
-               enum: -> { Telnyx::Models::UacConnectionListResponse::SipUriCallingPreference }
-
-      # @!attribute tags
-      #   Tags associated with the connection.
-      #
-      #   @return [Array<String>, nil]
-      optional :tags, Telnyx::Internal::Type::ArrayOf[String]
-
-      # @!attribute updated_at
-      #   ISO-8601 formatted date indicating when the resource was updated.
-      #
-      #   @return [String, nil]
-      optional :updated_at, String
-
-      # @!attribute user_name
-      #   The user name to be used as part of the credentials. Must be 4-32 characters
-      #   long and alphanumeric values only (no spaces or special characters). At least
-      #   one of the first 5 characters must be a letter.
-      #
-      #   @return [String, nil]
-      optional :user_name, String
-
-      # @!attribute webhook_api_version
-      #   Determines which webhook format will be used, Telnyx API v1 or v2.
-      #
-      #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::WebhookAPIVersion, nil]
-      optional :webhook_api_version, enum: -> { Telnyx::Models::UacConnectionListResponse::WebhookAPIVersion }
-
-      # @!attribute webhook_event_failover_url
-      #   The failover URL where webhooks related to this connection will be sent if
-      #   sending to the primary URL fails. Must include a scheme, such as 'https'.
-      #
-      #   @return [String, nil]
-      optional :webhook_event_failover_url, String, nil?: true
-
-      # @!attribute webhook_event_url
-      #   The URL where webhooks related to this connection will be sent. Must include a
-      #   scheme, such as 'https'.
-      #
-      #   @return [String, nil]
-      optional :webhook_event_url, String
-
-      # @!attribute webhook_timeout_secs
-      #   Specifies how many seconds to wait before timing out a webhook.
-      #
-      #   @return [Integer, nil]
-      optional :webhook_timeout_secs, Integer, nil?: true
-
-      # @!method initialize(id: nil, active: nil, anchorsite_override: nil, android_push_credential_id: nil, authentication: nil, call_cost_in_webhooks: nil, connection_name: nil, created_at: nil, default_on_hold_comfort_noise_enabled: nil, dtmf_type: nil, encode_contact_header_enabled: nil, encrypted_media: nil, external_uac_settings: nil, fqdn: nil, fqdn_outbound_authentication: nil, fqdns: nil, inbound: nil, internal_uac_settings: nil, ios_push_credential_id: nil, jitter_buffer: nil, noise_suppression: nil, noise_suppression_details: nil, onnet_t38_passthrough_enabled: nil, outbound: nil, password: nil, record_type: nil, registration_status: nil, registration_status_updated_at: nil, rtcp_settings: nil, sip_uri_calling_preference: nil, tags: nil, updated_at: nil, user_name: nil, webhook_api_version: nil, webhook_event_failover_url: nil, webhook_event_url: nil, webhook_timeout_secs: nil)
-      #   Some parameter documentations has been truncated, see
-      #   {Telnyx::Models::UacConnectionListResponse} for more details.
-      #
-      #   A UAC (User Agent Client) Connection registers Telnyx to your PBX — the opposite
-      #   of a standard SIP trunk, where the PBX registers to Telnyx. Use UAC when your
-      #   PBX doesn’t support outbound SIP registration or you need Telnyx to maintain the
-      #   registration.
-      #
-      #   @param id [String] Identifies the type of resource.
-      #
-      #   @param active [Boolean] Defaults to true
-      #
-      #   @param anchorsite_override [Symbol, Telnyx::Models::AnchorsiteOverride] `Latency` directs Telnyx to route media through the site with the lowest round-t
-      #
-      #   @param android_push_credential_id [String, nil] The uuid of the push credential for Android
-      #
-      #   @param authentication [Symbol, Telnyx::Models::UacConnectionListResponse::Authentication] The authentication strategy used by this connection.
-      #
-      #   @param call_cost_in_webhooks [Boolean] Specifies if call cost webhooks should be sent for this connection.
-      #
-      #   @param connection_name [String]
-      #
-      #   @param created_at [String] ISO-8601 formatted date indicating when the resource was created.
-      #
-      #   @param default_on_hold_comfort_noise_enabled [Boolean] When enabled, Telnyx will generate comfort noise when you place the call on hold
-      #
-      #   @param dtmf_type [Symbol, Telnyx::Models::DtmfType] Sets the type of DTMF digits sent from Telnyx to this Connection. Note that DTMF
-      #
-      #   @param encode_contact_header_enabled [Boolean] Encode the SIP contact header sent by Telnyx to avoid issues for NAT or ALG scen
-      #
-      #   @param encrypted_media [Symbol, Telnyx::Models::EncryptedMedia, nil] Enable use of SRTP for encryption. Cannot be set if the transport_portocol is TL
-      #
-      #   @param external_uac_settings [Telnyx::Models::UacConnectionListResponse::ExternalUacSettings] External SIP peer settings used by Telnyx when registering to your PBX and routi
-      #
-      #   @param fqdn [String] The Telnyx-managed FQDN generated for the UAC connection.
-      #
-      #   @param fqdn_outbound_authentication [Symbol, Telnyx::Models::UacConnectionListResponse::FqdnOutboundAuthentication] The fixed outbound authentication mode used by UAC FQDN records.
-      #
-      #   @param fqdns [Array<Telnyx::Models::Fqdn>] FQDN records managed automatically by the UAC connection lifecycle.
-      #
-      #   @param inbound [Telnyx::Models::UacConnectionListResponse::Inbound]
-      #
-      #   @param internal_uac_settings [Telnyx::Models::UacConnectionListResponse::InternalUacSettings] Internal Telnyx-side settings for a UAC connection.
-      #
-      #   @param ios_push_credential_id [String, nil] The uuid of the push credential for Ios
-      #
-      #   @param jitter_buffer [Telnyx::Models::ConnectionJitterBuffer] Configuration options for Jitter Buffer. Enables Jitter Buffer for RTP streams o
-      #
-      #   @param noise_suppression [Symbol, Telnyx::Models::UacConnectionListResponse::NoiseSuppression] Controls when noise suppression is applied to calls. When set to 'inbound', nois
-      #
-      #   @param noise_suppression_details [Telnyx::Models::ConnectionNoiseSuppressionDetails] Configuration options for noise suppression. These settings are stored regardles
-      #
-      #   @param onnet_t38_passthrough_enabled [Boolean] Enable on-net T38 if you prefer the sender and receiver negotiating T38 directly
-      #
-      #   @param outbound [Telnyx::Models::UacConnectionListResponse::Outbound]
-      #
-      #   @param password [String] The password to be used as part of the credentials. Must be 8 to 128 characters
-      #
-      #   @param record_type [String] Identifies the type of the resource.
-      #
-      #   @param registration_status [String, nil] The most recently known SIP registration status for this UAC connection.
-      #
-      #   @param registration_status_updated_at [String, nil] ISO 8601 formatted date indicating when the registration status was last updated
-      #
-      #   @param rtcp_settings [Telnyx::Models::ConnectionRtcpSettings]
-      #
-      #   @param sip_uri_calling_preference [Symbol, Telnyx::Models::UacConnectionListResponse::SipUriCallingPreference] This feature enables inbound SIP URI calls to your Credential Auth Connection. I
-      #
-      #   @param tags [Array<String>] Tags associated with the connection.
-      #
-      #   @param updated_at [String] ISO-8601 formatted date indicating when the resource was updated.
-      #
-      #   @param user_name [String] The user name to be used as part of the credentials. Must be 4-32 characters lon
-      #
-      #   @param webhook_api_version [Symbol, Telnyx::Models::UacConnectionListResponse::WebhookAPIVersion] Determines which webhook format will be used, Telnyx API v1 or v2.
-      #
-      #   @param webhook_event_failover_url [String, nil] The failover URL where webhooks related to this connection will be sent if sendi
-      #
-      #   @param webhook_event_url [String] The URL where webhooks related to this connection will be sent. Must include a s
-      #
-      #   @param webhook_timeout_secs [Integer, nil] Specifies how many seconds to wait before timing out a webhook.
-
-      # The authentication strategy used by this connection.
-      #
-      # @see Telnyx::Models::UacConnectionListResponse#authentication
-      module Authentication
-        extend Telnyx::Internal::Type::Enum
-
-        UAC_AUTHENTICATION = :"uac-authentication"
-
-        # @!method self.values
-        #   @return [Array<Symbol>]
-      end
-
-      # @see Telnyx::Models::UacConnectionListResponse#external_uac_settings
-      class ExternalUacSettings < Telnyx::Internal::Type::BaseModel
-        # @!attribute auth_username
-        #   The authentication username used in SIP digest authentication. If not set, the
-        #   Username value will be used.
-        #
-        #   @return [String, nil]
-        optional :auth_username, String, nil?: true
-
-        # @!attribute expiration_sec
-        #   The registration interval, in seconds, indicating how often the system refreshes
-        #   the SIP registration with the external SIP peer.
-        #
-        #   @return [Integer, nil]
-        optional :expiration_sec, Integer, nil?: true
-
-        # @!attribute from_user
-        #   The user portion of the SIP From header used in outbound requests. This controls
-        #   the caller identity presented to the external SIP peer.
-        #
-        #   @return [String, nil]
-        optional :from_user, String, nil?: true
-
-        # @!attribute outbound_proxy
-        #   An optional SIP proxy used to route outbound requests before reaching the
-        #   external SIP peer.
-        #
-        #   @return [String, nil]
-        optional :outbound_proxy, String, nil?: true
-
-        # @!attribute password
-        #   The SIP password used for digest authentication with the external SIP peer.
-        #
-        #   @return [String, nil]
-        optional :password, String
-
-        # @!attribute proxy
-        #   The SIP proxy address of the external SIP peer used for registrations and
-        #   outbound call routing.
-        #
-        #   @return [String, nil]
-        optional :proxy, String
-
-        # @!attribute transport
-        #   The transport protocol used for SIP signaling when communicating with the
-        #   external SIP peer. One of UDP, TLS, or TCP.
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::ExternalUacSettings::Transport, nil]
-        optional :transport,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::ExternalUacSettings::Transport },
-                 nil?: true
-
-        # @!attribute username
-        #   The SIP username used to authenticate with the external SIP peer for
-        #   registrations and outbound calls. Must start with a letter or number and contain
-        #   only letters, numbers, hyphens, and underscores.
-        #
-        #   @return [String, nil]
-        optional :username, String
-
-        # @!method initialize(auth_username: nil, expiration_sec: nil, from_user: nil, outbound_proxy: nil, password: nil, proxy: nil, transport: nil, username: nil)
-        #   Some parameter documentations has been truncated, see
-        #   {Telnyx::Models::UacConnectionListResponse::ExternalUacSettings} for more
-        #   details.
-        #
-        #   External SIP peer settings used by Telnyx when registering to your PBX and
-        #   routing outbound calls.
-        #
-        #   @param auth_username [String, nil] The authentication username used in SIP digest authentication. If not set, the U
-        #
-        #   @param expiration_sec [Integer, nil] The registration interval, in seconds, indicating how often the system refreshes
-        #
-        #   @param from_user [String, nil] The user portion of the SIP From header used in outbound requests. This controls
-        #
-        #   @param outbound_proxy [String, nil] An optional SIP proxy used to route outbound requests before reaching the extern
-        #
-        #   @param password [String] The SIP password used for digest authentication with the external SIP peer.
-        #
-        #   @param proxy [String] The SIP proxy address of the external SIP peer used for registrations and outbou
-        #
-        #   @param transport [Symbol, Telnyx::Models::UacConnectionListResponse::ExternalUacSettings::Transport, nil] The transport protocol used for SIP signaling when communicating with the extern
-        #
-        #   @param username [String] The SIP username used to authenticate with the external SIP peer for registratio
-
-        # The transport protocol used for SIP signaling when communicating with the
-        # external SIP peer. One of UDP, TLS, or TCP.
-        #
-        # @see Telnyx::Models::UacConnectionListResponse::ExternalUacSettings#transport
-        module Transport
-          extend Telnyx::Internal::Type::Enum
-
-          UDP = :UDP
-          TLS = :TLS
-          TCP = :TCP
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-      end
-
-      # The fixed outbound authentication mode used by UAC FQDN records.
-      #
-      # @see Telnyx::Models::UacConnectionListResponse#fqdn_outbound_authentication
-      module FqdnOutboundAuthentication
-        extend Telnyx::Internal::Type::Enum
-
-        CREDENTIAL_AUTHENTICATION = :"credential-authentication"
-
-        # @!method self.values
-        #   @return [Array<Symbol>]
-      end
-
-      # @see Telnyx::Models::UacConnectionListResponse#inbound
-      class Inbound < Telnyx::Internal::Type::BaseModel
-        # @!attribute ani_number_format
-        #   This setting allows you to set the format with which the caller's number (ANI)
-        #   is sent for inbound phone calls.
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::AniNumberFormat, nil]
-        optional :ani_number_format,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::Inbound::AniNumberFormat }
-
-        # @!attribute channel_limit
-        #   When set, this will limit the total number of inbound calls to phone numbers
-        #   associated with this connection.
-        #
-        #   @return [Integer, nil]
-        optional :channel_limit, Integer
-
-        # @!attribute codecs
-        #   Defines the list of codecs that Telnyx will send for inbound calls to a specific
-        #   number on your portal account, in priority order. This only works when the
-        #   Connection the number is assigned to uses Media Handling mode: default. OPUS and
-        #   H.264 codecs are available only when using TCP or TLS transport for SIP.
-        #
-        #   @return [Array<String>, nil]
-        optional :codecs, Telnyx::Internal::Type::ArrayOf[String]
-
-        # @!attribute default_routing_method
-        #   Default routing method to be used when a number is associated with the
-        #   connection. Must be one of the routing method types or left blank, other values
-        #   are not allowed.
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::DefaultRoutingMethod, nil]
-        optional :default_routing_method,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::Inbound::DefaultRoutingMethod }
-
-        # @!attribute dnis_number_format
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::DnisNumberFormat, nil]
-        optional :dnis_number_format,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::Inbound::DnisNumberFormat }
-
-        # @!attribute generate_ringback_tone
-        #   Generate ringback tone through 183 session progress message with early media.
-        #
-        #   @return [Boolean, nil]
-        optional :generate_ringback_tone, Telnyx::Internal::Type::Boolean
-
-        # @!attribute isup_headers_enabled
-        #   When set, inbound phone calls will receive ISUP parameters via SIP headers.
-        #   (Only when available and only when using TCP or TLS transport.)
-        #
-        #   @return [Boolean, nil]
-        optional :isup_headers_enabled, Telnyx::Internal::Type::Boolean
-
-        # @!attribute prack_enabled
-        #   Enable PRACK messages as defined in RFC3262.
-        #
-        #   @return [Boolean, nil]
-        optional :prack_enabled, Telnyx::Internal::Type::Boolean
-
-        # @!attribute shaken_stir_enabled
-        #   When enabled the SIP Connection will receive the Identity header with
-        #   Shaken/Stir data in the SIP INVITE message of inbound calls, even when using UDP
-        #   transport.
-        #
-        #   @return [Boolean, nil]
-        optional :shaken_stir_enabled, Telnyx::Internal::Type::Boolean
-
-        # @!attribute simultaneous_ringing
-        #   When enabled, allows multiple devices to ring simultaneously on incoming calls.
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::SimultaneousRinging, nil]
-        optional :simultaneous_ringing,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::Inbound::SimultaneousRinging }
-
-        # @!attribute sip_compact_headers_enabled
-        #   Defaults to true.
-        #
-        #   @return [Boolean, nil]
-        optional :sip_compact_headers_enabled, Telnyx::Internal::Type::Boolean
-
-        # @!attribute sip_subdomain
-        #   The Telnyx-generated SIP subdomain for this UAC connection.
-        #
-        #   @return [String, nil]
-        optional :sip_subdomain, String
-
-        # @!attribute sip_subdomain_receive_settings
-        #   Controls which SIP URI callers may reach this connection.
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::SipSubdomainReceiveSettings, nil]
-        optional :sip_subdomain_receive_settings,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::Inbound::SipSubdomainReceiveSettings }
-
-        # @!attribute timeout_1xx_secs
-        #   Time(sec) before aborting if connection is not made.
-        #
-        #   @return [Integer, nil]
-        optional :timeout_1xx_secs, Integer
-
-        # @!attribute timeout_2xx_secs
-        #   Time(sec) before aborting if call is unanswered (min: 1, max: 600).
-        #
-        #   @return [Integer, nil]
-        optional :timeout_2xx_secs, Integer
-
-        # @!method initialize(ani_number_format: nil, channel_limit: nil, codecs: nil, default_routing_method: nil, dnis_number_format: nil, generate_ringback_tone: nil, isup_headers_enabled: nil, prack_enabled: nil, shaken_stir_enabled: nil, simultaneous_ringing: nil, sip_compact_headers_enabled: nil, sip_subdomain: nil, sip_subdomain_receive_settings: nil, timeout_1xx_secs: nil, timeout_2xx_secs: nil)
-        #   Some parameter documentations has been truncated, see
-        #   {Telnyx::Models::UacConnectionListResponse::Inbound} for more details.
-        #
-        #   @param ani_number_format [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::AniNumberFormat] This setting allows you to set the format with which the caller's number (ANI) i
-        #
-        #   @param channel_limit [Integer] When set, this will limit the total number of inbound calls to phone numbers ass
-        #
-        #   @param codecs [Array<String>] Defines the list of codecs that Telnyx will send for inbound calls to a specific
-        #
-        #   @param default_routing_method [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::DefaultRoutingMethod] Default routing method to be used when a number is associated with the connectio
-        #
-        #   @param dnis_number_format [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::DnisNumberFormat]
-        #
-        #   @param generate_ringback_tone [Boolean] Generate ringback tone through 183 session progress message with early media.
-        #
-        #   @param isup_headers_enabled [Boolean] When set, inbound phone calls will receive ISUP parameters via SIP headers. (Onl
-        #
-        #   @param prack_enabled [Boolean] Enable PRACK messages as defined in RFC3262.
-        #
-        #   @param shaken_stir_enabled [Boolean] When enabled the SIP Connection will receive the Identity header with Shaken/Sti
-        #
-        #   @param simultaneous_ringing [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::SimultaneousRinging] When enabled, allows multiple devices to ring simultaneously on incoming calls.
-        #
-        #   @param sip_compact_headers_enabled [Boolean] Defaults to true.
-        #
-        #   @param sip_subdomain [String] The Telnyx-generated SIP subdomain for this UAC connection.
-        #
-        #   @param sip_subdomain_receive_settings [Symbol, Telnyx::Models::UacConnectionListResponse::Inbound::SipSubdomainReceiveSettings] Controls which SIP URI callers may reach this connection.
-        #
-        #   @param timeout_1xx_secs [Integer] Time(sec) before aborting if connection is not made.
-        #
-        #   @param timeout_2xx_secs [Integer] Time(sec) before aborting if call is unanswered (min: 1, max: 600).
-
-        # This setting allows you to set the format with which the caller's number (ANI)
-        # is sent for inbound phone calls.
-        #
-        # @see Telnyx::Models::UacConnectionListResponse::Inbound#ani_number_format
-        module AniNumberFormat
-          extend Telnyx::Internal::Type::Enum
-
-          PLUS_E_164 = :"+E.164"
-          E_164 = :"E.164"
-          PLUS_E_164_NATIONAL = :"+E.164-national"
-          E_164_NATIONAL = :"E.164-national"
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-
-        # Default routing method to be used when a number is associated with the
-        # connection. Must be one of the routing method types or left blank, other values
-        # are not allowed.
-        #
-        # @see Telnyx::Models::UacConnectionListResponse::Inbound#default_routing_method
-        module DefaultRoutingMethod
-          extend Telnyx::Internal::Type::Enum
-
-          SEQUENTIAL = :sequential
-          ROUND_ROBIN = :"round-robin"
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-
-        # @see Telnyx::Models::UacConnectionListResponse::Inbound#dnis_number_format
-        module DnisNumberFormat
-          extend Telnyx::Internal::Type::Enum
-
-          PLUS_E164 = :"+e164"
-          E164 = :e164
-          NATIONAL = :national
-          SIP_USERNAME = :sip_username
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-
-        # When enabled, allows multiple devices to ring simultaneously on incoming calls.
-        #
-        # @see Telnyx::Models::UacConnectionListResponse::Inbound#simultaneous_ringing
-        module SimultaneousRinging
-          extend Telnyx::Internal::Type::Enum
-
-          DISABLED = :disabled
-          ENABLED = :enabled
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-
-        # Controls which SIP URI callers may reach this connection.
-        #
-        # @see Telnyx::Models::UacConnectionListResponse::Inbound#sip_subdomain_receive_settings
-        module SipSubdomainReceiveSettings
-          extend Telnyx::Internal::Type::Enum
-
-          ONLY_MY_CONNECTIONS = :only_my_connections
-          FROM_ANYONE = :from_anyone
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-      end
-
-      # @see Telnyx::Models::UacConnectionListResponse#internal_uac_settings
-      class InternalUacSettings < Telnyx::Internal::Type::BaseModel
-        # @!attribute destination_uri
-        #   The SIP URI that Telnyx will call when handling an inbound request from the
-        #   external peer. Do not include a `sip:` prefix. The value must be in the format
-        #   `userinfo@<subdomain.>sip.telnyx.com` or
-        #   `userinfo@<subdomain.>sipdev.telnyx.com`; the userinfo portion may contain only
-        #   letters, digits, hyphens, and underscores.
-        #
-        #   @return [String, nil]
-        optional :destination_uri, String
-
-        # @!method initialize(destination_uri: nil)
-        #   Some parameter documentations has been truncated, see
-        #   {Telnyx::Models::UacConnectionListResponse::InternalUacSettings} for more
-        #   details.
-        #
-        #   Internal Telnyx-side settings for a UAC connection.
-        #
-        #   @param destination_uri [String] The SIP URI that Telnyx will call when handling an inbound request from the exte
-      end
-
-      # Controls when noise suppression is applied to calls. When set to 'inbound',
-      # noise suppression is applied to incoming audio. When set to 'outbound', it's
-      # applied to outgoing audio. When set to 'both', it's applied in both directions.
-      # When set to 'disabled', noise suppression is turned off.
-      #
-      # @see Telnyx::Models::UacConnectionListResponse#noise_suppression
-      module NoiseSuppression
-        extend Telnyx::Internal::Type::Enum
-
-        INBOUND = :inbound
-        OUTBOUND = :outbound
-        BOTH = :both
-        DISABLED = :disabled
-
-        # @!method self.values
-        #   @return [Array<Symbol>]
-      end
-
-      # @see Telnyx::Models::UacConnectionListResponse#outbound
-      class Outbound < Telnyx::Internal::Type::BaseModel
-        # @!attribute ani_override
-        #   Set a phone number as the ani_override value to override caller id number on
-        #   outbound calls.
-        #
-        #   @return [String, nil]
-        optional :ani_override, String
-
-        # @!attribute ani_override_type
-        #   Specifies when we apply your ani_override setting. Only applies when
-        #   ani_override is not blank.
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Outbound::AniOverrideType, nil]
-        optional :ani_override_type,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::Outbound::AniOverrideType }
-
-        # @!attribute call_parking_enabled
-        #   Forces all SIP calls originated on this connection to be "parked" instead of
-        #   "bridged" to the destination specified on the URI. Parked calls will return
-        #   ringback to the caller and will await for a Call Control command to define which
-        #   action will be taken next.
-        #
-        #   @return [Boolean, nil]
-        optional :call_parking_enabled, Telnyx::Internal::Type::Boolean, nil?: true
-
-        # @!attribute channel_limit
-        #   When set, this will limit the total number of outbound calls to phone numbers
-        #   associated with this connection.
-        #
-        #   @return [Integer, nil]
-        optional :channel_limit, Integer
-
-        # @!attribute generate_ringback_tone
-        #   Generate ringback tone through 183 session progress message with early media.
-        #
-        #   @return [Boolean, nil]
-        optional :generate_ringback_tone, Telnyx::Internal::Type::Boolean
-
-        # @!attribute instant_ringback_enabled
-        #   When set, ringback will not wait for indication before sending ringback tone to
-        #   calling party.
-        #
-        #   @return [Boolean, nil]
-        optional :instant_ringback_enabled, Telnyx::Internal::Type::Boolean
-
-        # @!attribute localization
-        #   A 2-character country code specifying the country whose national dialing rules
-        #   should be used. For example, if set to `US` then any US number can be dialed
-        #   without preprending +1 to the number. When left blank, Telnyx will try US and GB
-        #   dialing rules, in that order, by default.
-        #
-        #   @return [String, nil]
-        optional :localization, String
-
-        # @!attribute outbound_voice_profile_id
-        #   Identifies the associated outbound voice profile.
-        #
-        #   @return [String, nil]
-        optional :outbound_voice_profile_id, String
-
-        # @!attribute t38_reinvite_source
-        #   This setting only affects connections with Fax-type Outbound Voice Profiles. The
-        #   setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
-        #   default, Telnyx will send the re-invite. If set to `customer`, the caller is
-        #   expected to send the t.38 reinvite.
-        #
-        #   @return [Symbol, Telnyx::Models::UacConnectionListResponse::Outbound::T38ReinviteSource, nil]
-        optional :t38_reinvite_source,
-                 enum: -> { Telnyx::Models::UacConnectionListResponse::Outbound::T38ReinviteSource }
-
-        # @!method initialize(ani_override: nil, ani_override_type: nil, call_parking_enabled: nil, channel_limit: nil, generate_ringback_tone: nil, instant_ringback_enabled: nil, localization: nil, outbound_voice_profile_id: nil, t38_reinvite_source: nil)
-        #   Some parameter documentations has been truncated, see
-        #   {Telnyx::Models::UacConnectionListResponse::Outbound} for more details.
-        #
-        #   @param ani_override [String] Set a phone number as the ani_override value to override caller id number on out
-        #
-        #   @param ani_override_type [Symbol, Telnyx::Models::UacConnectionListResponse::Outbound::AniOverrideType] Specifies when we apply your ani_override setting. Only applies when ani_overrid
-        #
-        #   @param call_parking_enabled [Boolean, nil] Forces all SIP calls originated on this connection to be "parked" instead of "br
-        #
-        #   @param channel_limit [Integer] When set, this will limit the total number of outbound calls to phone numbers as
-        #
-        #   @param generate_ringback_tone [Boolean] Generate ringback tone through 183 session progress message with early media.
-        #
-        #   @param instant_ringback_enabled [Boolean] When set, ringback will not wait for indication before sending ringback tone to
-        #
-        #   @param localization [String] A 2-character country code specifying the country whose national dialing rules s
-        #
-        #   @param outbound_voice_profile_id [String] Identifies the associated outbound voice profile.
-        #
-        #   @param t38_reinvite_source [Symbol, Telnyx::Models::UacConnectionListResponse::Outbound::T38ReinviteSource] This setting only affects connections with Fax-type Outbound Voice Profiles. The
-
-        # Specifies when we apply your ani_override setting. Only applies when
-        # ani_override is not blank.
-        #
-        # @see Telnyx::Models::UacConnectionListResponse::Outbound#ani_override_type
-        module AniOverrideType
-          extend Telnyx::Internal::Type::Enum
-
-          ALWAYS = :always
-          NORMAL = :normal
-          EMERGENCY = :emergency
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-
-        # This setting only affects connections with Fax-type Outbound Voice Profiles. The
-        # setting dictates whether or not Telnyx sends a t.38 reinvite.<br/><br/> By
-        # default, Telnyx will send the re-invite. If set to `customer`, the caller is
-        # expected to send the t.38 reinvite.
-        #
-        # @see Telnyx::Models::UacConnectionListResponse::Outbound#t38_reinvite_source
-        module T38ReinviteSource
-          extend Telnyx::Internal::Type::Enum
-
-          TELNYX = :telnyx
-          CUSTOMER = :customer
-          DISABLED = :disabled
-          PASSTHRU = :passthru
-          CALLER_PASSTHRU = :"caller-passthru"
-          CALLEE_PASSTHRU = :"callee-passthru"
-
-          # @!method self.values
-          #   @return [Array<Symbol>]
-        end
-      end
-
-      # This feature enables inbound SIP URI calls to your Credential Auth Connection.
-      # If enabled for all (unrestricted) then anyone who calls the SIP URI
-      # <your-username>@telnyx.com will be connected to your Connection. You can also
-      # choose to allow only calls that are originated on any Connections under your
-      # account (internal).
-      #
-      # @see Telnyx::Models::UacConnectionListResponse#sip_uri_calling_preference
-      module SipUriCallingPreference
-        extend Telnyx::Internal::Type::Enum
-
-        DISABLED = :disabled
-        UNRESTRICTED = :unrestricted
-        INTERNAL = :internal
-
-        # @!method self.values
-        #   @return [Array<Symbol>]
-      end
-
-      # Determines which webhook format will be used, Telnyx API v1 or v2.
-      #
-      # @see Telnyx::Models::UacConnectionListResponse#webhook_api_version
-      module WebhookAPIVersion
-        extend Telnyx::Internal::Type::Enum
-
-        V1 = :"1"
-        V2 = :"2"
-
-        # @!method self.values
-        #   @return [Array<Symbol>]
-      end
-    end
-  end
-end