tck-lambdas 0.3.0 → 0.3.1

data/lib/tck/lambdas/chistacojs/node_modules/cheerio/node_modules/htmlparser2/node_modules/readable-stream/lib/_stream_transform.js

@@ -1,180 +0,0 @@
-// a transform stream is a readable/writable stream where you do
-// something with the data.  Sometimes it's called a "filter",
-// but that's not a great name for it, since that implies a thing where
-// some bits pass through, and others are simply ignored.  (That would
-// be a valid example of a transform, of course.)
-//
-// While the output is causally related to the input, it's not a
-// necessarily symmetric or synchronous transformation.  For example,
-// a zlib stream might take multiple plain-text writes(), and then
-// emit a single compressed chunk some time in the future.
-//
-// Here's how this works:
-//
-// The Transform stream has all the aspects of the readable and writable
-// stream classes.  When you write(chunk), that calls _write(chunk,cb)
-// internally, and returns false if there's a lot of pending writes
-// buffered up.  When you call read(), that calls _read(n) until
-// there's enough pending readable data buffered up.
-//
-// In a transform stream, the written data is placed in a buffer.  When
-// _read(n) is called, it transforms the queued up data, calling the
-// buffered _write cb's as it consumes chunks.  If consuming a single
-// written chunk would result in multiple output chunks, then the first
-// outputted bit calls the readcb, and subsequent chunks just go into
-// the read buffer, and will cause it to emit 'readable' if necessary.
-//
-// This way, back-pressure is actually determined by the reading side,
-// since _read has to be called to start processing a new chunk.  However,
-// a pathological inflate type of transform can cause excessive buffering
-// here.  For example, imagine a stream where every byte of input is
-// interpreted as an integer from 0-255, and then results in that many
-// bytes of output.  Writing the 4 bytes {ff,ff,ff,ff} would result in
-// 1kb of data being output.  In this case, you could write a very small
-// amount of input, and end up with a very large amount of output.  In
-// such a pathological inflating mechanism, there'd be no way to tell
-// the system to stop doing the transform.  A single 4MB write could
-// cause the system to run out of memory.
-//
-// However, even in such a pathological case, only a single written chunk
-// would be consumed, and then the rest would wait (un-transformed) until
-// the results of the previous transformed chunk were consumed.
-
-'use strict';
-
-module.exports = Transform;
-
-var Duplex = require('./_stream_duplex');
-
-/*<replacement>*/
-var util = require('core-util-is');
-util.inherits = require('inherits');
-/*</replacement>*/
-
-util.inherits(Transform, Duplex);
-
-function TransformState(stream) {
-  this.afterTransform = function (er, data) {
-    return afterTransform(stream, er, data);
-  };
-
-  this.needTransform = false;
-  this.transforming = false;
-  this.writecb = null;
-  this.writechunk = null;
-  this.writeencoding = null;
-}
-
-function afterTransform(stream, er, data) {
-  var ts = stream._transformState;
-  ts.transforming = false;
-
-  var cb = ts.writecb;
-
-  if (!cb) return stream.emit('error', new Error('no writecb in Transform class'));
-
-  ts.writechunk = null;
-  ts.writecb = null;
-
-  if (data !== null && data !== undefined) stream.push(data);
-
-  cb(er);
-
-  var rs = stream._readableState;
-  rs.reading = false;
-  if (rs.needReadable || rs.length < rs.highWaterMark) {
-    stream._read(rs.highWaterMark);
-  }
-}
-
-function Transform(options) {
-  if (!(this instanceof Transform)) return new Transform(options);
-
-  Duplex.call(this, options);
-
-  this._transformState = new TransformState(this);
-
-  // when the writable side finishes, then flush out anything remaining.
-  var stream = this;
-
-  // start out asking for a readable event once data is transformed.
-  this._readableState.needReadable = true;
-
-  // we have implemented the _read method, and done the other things
-  // that Readable wants before the first _read call, so unset the
-  // sync guard flag.
-  this._readableState.sync = false;
-
-  if (options) {
-    if (typeof options.transform === 'function') this._transform = options.transform;
-
-    if (typeof options.flush === 'function') this._flush = options.flush;
-  }
-
-  this.once('prefinish', function () {
-    if (typeof this._flush === 'function') this._flush(function (er) {
-      done(stream, er);
-    });else done(stream);
-  });
-}
-
-Transform.prototype.push = function (chunk, encoding) {
-  this._transformState.needTransform = false;
-  return Duplex.prototype.push.call(this, chunk, encoding);
-};
-
-// This is the part where you do stuff!
-// override this function in implementation classes.
-// 'chunk' is an input chunk.
-//
-// Call `push(newChunk)` to pass along transformed output
-// to the readable side.  You may call 'push' zero or more times.
-//
-// Call `cb(err)` when you are done with this chunk.  If you pass
-// an error, then that'll put the hurt on the whole operation.  If you
-// never call cb(), then you'll never get another chunk.
-Transform.prototype._transform = function (chunk, encoding, cb) {
-  throw new Error('Not implemented');
-};
-
-Transform.prototype._write = function (chunk, encoding, cb) {
-  var ts = this._transformState;
-  ts.writecb = cb;
-  ts.writechunk = chunk;
-  ts.writeencoding = encoding;
-  if (!ts.transforming) {
-    var rs = this._readableState;
-    if (ts.needTransform || rs.needReadable || rs.length < rs.highWaterMark) this._read(rs.highWaterMark);
-  }
-};
-
-// Doesn't matter what the args are here.
-// _transform does all the work.
-// That we got here means that the readable side wants more data.
-Transform.prototype._read = function (n) {
-  var ts = this._transformState;
-
-  if (ts.writechunk !== null && ts.writecb && !ts.transforming) {
-    ts.transforming = true;
-    this._transform(ts.writechunk, ts.writeencoding, ts.afterTransform);
-  } else {
-    // mark that we need a transform, so that any data that comes in
-    // will get processed, now that we've asked for it.
-    ts.needTransform = true;
-  }
-};
-
-function done(stream, er) {
-  if (er) return stream.emit('error', er);
-
-  // if there's nothing in the write buffer, then that means
-  // that nothing more will ever be provided
-  var ws = stream._writableState;
-  var ts = stream._transformState;
-
-  if (ws.length) throw new Error('Calling transform done when ws.length != 0');
-
-  if (ts.transforming) throw new Error('Calling transform done when still transforming');
-
-  return stream.push(null);
-}

data/lib/tck/lambdas/chistacojs/node_modules/cheerio/node_modules/htmlparser2/node_modules/readable-stream/lib/_stream_writable.js

@@ -1,526 +0,0 @@
-// A bit simpler than readable streams.
-// Implement an async ._write(chunk, encoding, cb), and it'll handle all
-// the drain event emission and buffering.
-
-'use strict';
-
-module.exports = Writable;
-
-/*<replacement>*/
-var processNextTick = require('process-nextick-args');
-/*</replacement>*/
-
-/*<replacement>*/
-var asyncWrite = !process.browser && ['v0.10', 'v0.9.'].indexOf(process.version.slice(0, 5)) > -1 ? setImmediate : processNextTick;
-/*</replacement>*/
-
-Writable.WritableState = WritableState;
-
-/*<replacement>*/
-var util = require('core-util-is');
-util.inherits = require('inherits');
-/*</replacement>*/
-
-/*<replacement>*/
-var internalUtil = {
-  deprecate: require('util-deprecate')
-};
-/*</replacement>*/
-
-/*<replacement>*/
-var Stream;
-(function () {
-  try {
-    Stream = require('st' + 'ream');
-  } catch (_) {} finally {
-    if (!Stream) Stream = require('events').EventEmitter;
-  }
-})();
-/*</replacement>*/
-
-var Buffer = require('buffer').Buffer;
-/*<replacement>*/
-var bufferShim = require('buffer-shims');
-/*</replacement>*/
-
-util.inherits(Writable, Stream);
-
-function nop() {}
-
-function WriteReq(chunk, encoding, cb) {
-  this.chunk = chunk;
-  this.encoding = encoding;
-  this.callback = cb;
-  this.next = null;
-}
-
-var Duplex;
-function WritableState(options, stream) {
-  Duplex = Duplex || require('./_stream_duplex');
-
-  options = options || {};
-
-  // object stream flag to indicate whether or not this stream
-  // contains buffers or objects.
-  this.objectMode = !!options.objectMode;
-
-  if (stream instanceof Duplex) this.objectMode = this.objectMode || !!options.writableObjectMode;
-
-  // the point at which write() starts returning false
-  // Note: 0 is a valid value, means that we always return false if
-  // the entire buffer is not flushed immediately on write()
-  var hwm = options.highWaterMark;
-  var defaultHwm = this.objectMode ? 16 : 16 * 1024;
-  this.highWaterMark = hwm || hwm === 0 ? hwm : defaultHwm;
-
-  // cast to ints.
-  this.highWaterMark = ~ ~this.highWaterMark;
-
-  this.needDrain = false;
-  // at the start of calling end()
-  this.ending = false;
-  // when end() has been called, and returned
-  this.ended = false;
-  // when 'finish' is emitted
-  this.finished = false;
-
-  // should we decode strings into buffers before passing to _write?
-  // this is here so that some node-core streams can optimize string
-  // handling at a lower level.
-  var noDecode = options.decodeStrings === false;
-  this.decodeStrings = !noDecode;
-
-  // Crypto is kind of old and crusty.  Historically, its default string
-  // encoding is 'binary' so we have to make this configurable.
-  // Everything else in the universe uses 'utf8', though.
-  this.defaultEncoding = options.defaultEncoding || 'utf8';
-
-  // not an actual buffer we keep track of, but a measurement
-  // of how much we're waiting to get pushed to some underlying
-  // socket or file.
-  this.length = 0;
-
-  // a flag to see when we're in the middle of a write.
-  this.writing = false;
-
-  // when true all writes will be buffered until .uncork() call
-  this.corked = 0;
-
-  // a flag to be able to tell if the onwrite cb is called immediately,
-  // or on a later tick.  We set this to true at first, because any
-  // actions that shouldn't happen until "later" should generally also
-  // not happen before the first write call.
-  this.sync = true;
-
-  // a flag to know if we're processing previously buffered items, which
-  // may call the _write() callback in the same tick, so that we don't
-  // end up in an overlapped onwrite situation.
-  this.bufferProcessing = false;
-
-  // the callback that's passed to _write(chunk,cb)
-  this.onwrite = function (er) {
-    onwrite(stream, er);
-  };
-
-  // the callback that the user supplies to write(chunk,encoding,cb)
-  this.writecb = null;
-
-  // the amount that is being written when _write is called.
-  this.writelen = 0;
-
-  this.bufferedRequest = null;
-  this.lastBufferedRequest = null;
-
-  // number of pending user-supplied write callbacks
-  // this must be 0 before 'finish' can be emitted
-  this.pendingcb = 0;
-
-  // emit prefinish if the only thing we're waiting for is _write cbs
-  // This is relevant for synchronous Transform streams
-  this.prefinished = false;
-
-  // True if the error was already emitted and should not be thrown again
-  this.errorEmitted = false;
-
-  // count buffered requests
-  this.bufferedRequestCount = 0;
-
-  // allocate the first CorkedRequest, there is always
-  // one allocated and free to use, and we maintain at most two
-  this.corkedRequestsFree = new CorkedRequest(this);
-}
-
-WritableState.prototype.getBuffer = function writableStateGetBuffer() {
-  var current = this.bufferedRequest;
-  var out = [];
-  while (current) {
-    out.push(current);
-    current = current.next;
-  }
-  return out;
-};
-
-(function () {
-  try {
-    Object.defineProperty(WritableState.prototype, 'buffer', {
-      get: internalUtil.deprecate(function () {
-        return this.getBuffer();
-      }, '_writableState.buffer is deprecated. Use _writableState.getBuffer ' + 'instead.')
-    });
-  } catch (_) {}
-})();
-
-var Duplex;
-function Writable(options) {
-  Duplex = Duplex || require('./_stream_duplex');
-
-  // Writable ctor is applied to Duplexes, though they're not
-  // instanceof Writable, they're instanceof Readable.
-  if (!(this instanceof Writable) && !(this instanceof Duplex)) return new Writable(options);
-
-  this._writableState = new WritableState(options, this);
-
-  // legacy.
-  this.writable = true;
-
-  if (options) {
-    if (typeof options.write === 'function') this._write = options.write;
-
-    if (typeof options.writev === 'function') this._writev = options.writev;
-  }
-
-  Stream.call(this);
-}
-
-// Otherwise people can pipe Writable streams, which is just wrong.
-Writable.prototype.pipe = function () {
-  this.emit('error', new Error('Cannot pipe, not readable'));
-};
-
-function writeAfterEnd(stream, cb) {
-  var er = new Error('write after end');
-  // TODO: defer error events consistently everywhere, not just the cb
-  stream.emit('error', er);
-  processNextTick(cb, er);
-}
-
-// If we get something that is not a buffer, string, null, or undefined,
-// and we're not in objectMode, then that's an error.
-// Otherwise stream chunks are all considered to be of length=1, and the
-// watermarks determine how many objects to keep in the buffer, rather than
-// how many bytes or characters.
-function validChunk(stream, state, chunk, cb) {
-  var valid = true;
-  var er = false;
-  // Always throw error if a null is written
-  // if we are not in object mode then throw
-  // if it is not a buffer, string, or undefined.
-  if (chunk === null) {
-    er = new TypeError('May not write null values to stream');
-  } else if (!Buffer.isBuffer(chunk) && typeof chunk !== 'string' && chunk !== undefined && !state.objectMode) {
-    er = new TypeError('Invalid non-string/buffer chunk');
-  }
-  if (er) {
-    stream.emit('error', er);
-    processNextTick(cb, er);
-    valid = false;
-  }
-  return valid;
-}
-
-Writable.prototype.write = function (chunk, encoding, cb) {
-  var state = this._writableState;
-  var ret = false;
-
-  if (typeof encoding === 'function') {
-    cb = encoding;
-    encoding = null;
-  }
-
-  if (Buffer.isBuffer(chunk)) encoding = 'buffer';else if (!encoding) encoding = state.defaultEncoding;
-
-  if (typeof cb !== 'function') cb = nop;
-
-  if (state.ended) writeAfterEnd(this, cb);else if (validChunk(this, state, chunk, cb)) {
-    state.pendingcb++;
-    ret = writeOrBuffer(this, state, chunk, encoding, cb);
-  }
-
-  return ret;
-};
-
-Writable.prototype.cork = function () {
-  var state = this._writableState;
-
-  state.corked++;
-};
-
-Writable.prototype.uncork = function () {
-  var state = this._writableState;
-
-  if (state.corked) {
-    state.corked--;
-
-    if (!state.writing && !state.corked && !state.finished && !state.bufferProcessing && state.bufferedRequest) clearBuffer(this, state);
-  }
-};
-
-Writable.prototype.setDefaultEncoding = function setDefaultEncoding(encoding) {
-  // node::ParseEncoding() requires lower case.
-  if (typeof encoding === 'string') encoding = encoding.toLowerCase();
-  if (!(['hex', 'utf8', 'utf-8', 'ascii', 'binary', 'base64', 'ucs2', 'ucs-2', 'utf16le', 'utf-16le', 'raw'].indexOf((encoding + '').toLowerCase()) > -1)) throw new TypeError('Unknown encoding: ' + encoding);
-  this._writableState.defaultEncoding = encoding;
-  return this;
-};
-
-function decodeChunk(state, chunk, encoding) {
-  if (!state.objectMode && state.decodeStrings !== false && typeof chunk === 'string') {
-    chunk = bufferShim.from(chunk, encoding);
-  }
-  return chunk;
-}
-
-// if we're already writing something, then just put this
-// in the queue, and wait our turn.  Otherwise, call _write
-// If we return false, then we need a drain event, so set that flag.
-function writeOrBuffer(stream, state, chunk, encoding, cb) {
-  chunk = decodeChunk(state, chunk, encoding);
-
-  if (Buffer.isBuffer(chunk)) encoding = 'buffer';
-  var len = state.objectMode ? 1 : chunk.length;
-
-  state.length += len;
-
-  var ret = state.length < state.highWaterMark;
-  // we must ensure that previous needDrain will not be reset to false.
-  if (!ret) state.needDrain = true;
-
-  if (state.writing || state.corked) {
-    var last = state.lastBufferedRequest;
-    state.lastBufferedRequest = new WriteReq(chunk, encoding, cb);
-    if (last) {
-      last.next = state.lastBufferedRequest;
-    } else {
-      state.bufferedRequest = state.lastBufferedRequest;
-    }
-    state.bufferedRequestCount += 1;
-  } else {
-    doWrite(stream, state, false, len, chunk, encoding, cb);
-  }
-
-  return ret;
-}
-
-function doWrite(stream, state, writev, len, chunk, encoding, cb) {
-  state.writelen = len;
-  state.writecb = cb;
-  state.writing = true;
-  state.sync = true;
-  if (writev) stream._writev(chunk, state.onwrite);else stream._write(chunk, encoding, state.onwrite);
-  state.sync = false;
-}
-
-function onwriteError(stream, state, sync, er, cb) {
-  --state.pendingcb;
-  if (sync) processNextTick(cb, er);else cb(er);
-
-  stream._writableState.errorEmitted = true;
-  stream.emit('error', er);
-}
-
-function onwriteStateUpdate(state) {
-  state.writing = false;
-  state.writecb = null;
-  state.length -= state.writelen;
-  state.writelen = 0;
-}
-
-function onwrite(stream, er) {
-  var state = stream._writableState;
-  var sync = state.sync;
-  var cb = state.writecb;
-
-  onwriteStateUpdate(state);
-
-  if (er) onwriteError(stream, state, sync, er, cb);else {
-    // Check if we're actually ready to finish, but don't emit yet
-    var finished = needFinish(state);
-
-    if (!finished && !state.corked && !state.bufferProcessing && state.bufferedRequest) {
-      clearBuffer(stream, state);
-    }
-
-    if (sync) {
-      /*<replacement>*/
-      asyncWrite(afterWrite, stream, state, finished, cb);
-      /*</replacement>*/
-    } else {
-        afterWrite(stream, state, finished, cb);
-      }
-  }
-}
-
-function afterWrite(stream, state, finished, cb) {
-  if (!finished) onwriteDrain(stream, state);
-  state.pendingcb--;
-  cb();
-  finishMaybe(stream, state);
-}
-
-// Must force callback to be called on nextTick, so that we don't
-// emit 'drain' before the write() consumer gets the 'false' return
-// value, and has a chance to attach a 'drain' listener.
-function onwriteDrain(stream, state) {
-  if (state.length === 0 && state.needDrain) {
-    state.needDrain = false;
-    stream.emit('drain');
-  }
-}
-
-// if there's something in the buffer waiting, then process it
-function clearBuffer(stream, state) {
-  state.bufferProcessing = true;
-  var entry = state.bufferedRequest;
-
-  if (stream._writev && entry && entry.next) {
-    // Fast case, write everything using _writev()
-    var l = state.bufferedRequestCount;
-    var buffer = new Array(l);
-    var holder = state.corkedRequestsFree;
-    holder.entry = entry;
-
-    var count = 0;
-    while (entry) {
-      buffer[count] = entry;
-      entry = entry.next;
-      count += 1;
-    }
-
-    doWrite(stream, state, true, state.length, buffer, '', holder.finish);
-
-    // doWrite is almost always async, defer these to save a bit of time
-    // as the hot path ends with doWrite
-    state.pendingcb++;
-    state.lastBufferedRequest = null;
-    if (holder.next) {
-      state.corkedRequestsFree = holder.next;
-      holder.next = null;
-    } else {
-      state.corkedRequestsFree = new CorkedRequest(state);
-    }
-  } else {
-    // Slow case, write chunks one-by-one
-    while (entry) {
-      var chunk = entry.chunk;
-      var encoding = entry.encoding;
-      var cb = entry.callback;
-      var len = state.objectMode ? 1 : chunk.length;
-
-      doWrite(stream, state, false, len, chunk, encoding, cb);
-      entry = entry.next;
-      // if we didn't call the onwrite immediately, then
-      // it means that we need to wait until it does.
-      // also, that means that the chunk and cb are currently
-      // being processed, so move the buffer counter past them.
-      if (state.writing) {
-        break;
-      }
-    }
-
-    if (entry === null) state.lastBufferedRequest = null;
-  }
-
-  state.bufferedRequestCount = 0;
-  state.bufferedRequest = entry;
-  state.bufferProcessing = false;
-}
-
-Writable.prototype._write = function (chunk, encoding, cb) {
-  cb(new Error('not implemented'));
-};
-
-Writable.prototype._writev = null;
-
-Writable.prototype.end = function (chunk, encoding, cb) {
-  var state = this._writableState;
-
-  if (typeof chunk === 'function') {
-    cb = chunk;
-    chunk = null;
-    encoding = null;
-  } else if (typeof encoding === 'function') {
-    cb = encoding;
-    encoding = null;
-  }
-
-  if (chunk !== null && chunk !== undefined) this.write(chunk, encoding);
-
-  // .end() fully uncorks
-  if (state.corked) {
-    state.corked = 1;
-    this.uncork();
-  }
-
-  // ignore unnecessary end() calls.
-  if (!state.ending && !state.finished) endWritable(this, state, cb);
-};
-
-function needFinish(state) {
-  return state.ending && state.length === 0 && state.bufferedRequest === null && !state.finished && !state.writing;
-}
-
-function prefinish(stream, state) {
-  if (!state.prefinished) {
-    state.prefinished = true;
-    stream.emit('prefinish');
-  }
-}
-
-function finishMaybe(stream, state) {
-  var need = needFinish(state);
-  if (need) {
-    if (state.pendingcb === 0) {
-      prefinish(stream, state);
-      state.finished = true;
-      stream.emit('finish');
-    } else {
-      prefinish(stream, state);
-    }
-  }
-  return need;
-}
-
-function endWritable(stream, state, cb) {
-  state.ending = true;
-  finishMaybe(stream, state);
-  if (cb) {
-    if (state.finished) processNextTick(cb);else stream.once('finish', cb);
-  }
-  state.ended = true;
-  stream.writable = false;
-}
-
-// It seems a linked list but it is not
-// there will be only 2 of these for each stream
-function CorkedRequest(state) {
-  var _this = this;
-
-  this.next = null;
-  this.entry = null;
-
-  this.finish = function (err) {
-    var entry = _this.entry;
-    _this.entry = null;
-    while (entry) {
-      var cb = entry.callback;
-      state.pendingcb--;
-      cb(err);
-      entry = entry.next;
-    }
-    if (state.corkedRequestsFree) {
-      state.corkedRequestsFree.next = _this;
-    } else {
-      state.corkedRequestsFree = _this;
-    }
-  };
-}